ELECTROLYTIC SILVER REFINING TANK TYPE FIOA MADE OF P.P., COMPLETE WITH SPECIAL IMMERSED SCRAPING COMBS SYSTEM.
Complete System Consisting of:
- 5 anodic bars made of titanium with central slot for baskets insertion.
- 5 high conductivity titanium baskets that also prevent ag anodes falling.
- 5 pp bags to cover the titnium baskets in order to contain the silver sludge produced during the electrolysis.(the sludges may contain au,pt,pd)
- 6 cathodic plates welded to relevant cathode bar.
- Total cathodic area = 1 sqm approx.
- 11 contacts for anodic & cathodic bars.
- 2 flat copper bars to connect anodic / cathodic contacts.
- 1 motorised immersed scraping combs system positioned between anodes and athodes.
- Combs gear motor = 0,12 hp.
- Protection cover with outlet for the suction of fumes.
- Overall dimensions:1000x885x1000h mm
RECYCLING TANK MADE OF PP FOR SILVER REFINING SOLUTION AND COMPLETE WITH IMMERSED PROPELLER PUMP
- volume = 500 lts. approx
- double reinforcements on the tank
- recycling pump type 7/10 with immersed impeller 1000h mm.
- pump capacity: 6000 lts./h
- pump motor power: 0,55 kw
- inlet and outlet of the solution are placed in the middle of rear wall in order to allow the positioning of this tank either on left or right side of the silver refining tanks.
- main switchboard
- absorbed power: 0.55 kw.
- overall dimensions: 850x1020x1450h mm.
STABILIZED POWER CURRENT RECTIFIER 1500 AMP
- max. amperage:1500 ampere
- max. voltage: 6 volts
- air cooling system
- absorbed amp: 30 a.
- total absorbed power: 12 kw.
- overall dimensions: 750x500x1450h mm
WHEELED VACUUM FILTERING UNIT MADE OF PP USED TO FILTER SOLUTIONS COMING FROM PRECIOUS METALS REFINING PROCESS OR FROM OTHER SOURCE TYPE BP630 COMPLETE WITH MAGNETIC PROPELLER PUMP.
- buchner filter internal ø 616 mm, height 200mm, preconfigured for paper filter ø 600mm.
- extractable meraklon cloth bag.
- cover for buchner filter complete with clamps and inlet solution tube
- 16 s/steel clamps.
- funnel under the buchner filter
- storage container volume approx.: 130 lt.
- transparent level check with top decompressionvalve.
- construction in p.p. thickness:12mm.
- p.p. flange
- rotating wheels
- safety valve for vacuum
- magnetic propeller pump complete with by-pass
STANDARD HOT AIR DRYING AND WASHING CENTRIFUGE MADE OF S/STEEL AISI 316
- autocentering stainless steel basket ø 350 mm.
- speed of the basket: 700 r.p.m.
- 1 acid proof filter bag for the basket
- 1 s/steel cover with funnel for introducing washing water.
- 1 s/steel cover with heating complete withblowing fan for drying.
- 1 heating resistance
- 1 main switchboard with all controls
- 1 motor 1,0 hp
- working capacity: max. 40 kg.
- total absorbed power: 3,75 kw.
- overall dimensions: 95x55x110h cm.
HIGH POWER WATER JET VACUUM PUMP TYPE “FIOA INT.”FOR CHEMICAL PLANTS AND REFINING PLANTS THAT WORKS UNDER VACUUM.
THERMOSTATIC STOVE DRYER T5510 FOR DRYING GOLD AND SILVER GRAINS, CRISTALS AND JEWELLERY ITEMS WITH N°10 EXTRCTABLE PLANES 50x50cm AND N°6 EXTRACTABLE PYREX CONTAINERS.
UNIT FOR WASHING ACID FUMES PRODUCED DURING REFINING AND HOLLOWING PROCESSES TYPE FIOA/1T 1000
2 POSITIONS HAND-WASH BASIN MADE OF P.P.8 mm WITH FORCED FILTRATION SYSTEM.