NEW TVN Mod. AVR/O-B Winding Machine for tube and spiral in continuous

This machine is suitable for making tube starting from strips of plate. The profiles variety of the anchorite pin and thread pin allow a lot of variety of tube' s profiles obtainable from the manufacturing. Below there are some profiles. For a good tube result is essential that the strips have a high precision on the width. The base machine is supplied with special chuck; the maximum travel of extraction is 5 mm for turn, for building spirals in continuous. It has a carriage with loose movement on ball - bearings where are assembled the different equipments. The chuck rotation adjustable with handle from 40/500 r. p. m.. Foot-control start. Construction standards in accordance to "CE" with respective documentation. Installed horse power 0,75 KW. Power supply 380 V. 50HZ Three-phase. Dimensions: Lengh 850 mm Width 550 mm Height 1100 mm Approx. Weight 170 kg Equipped With: TOOLING LIST : ROUND WINDING SCHAPE Spina filettata (per Campanelle).. 425,00  € Thread pin (for ear-ring) Foro di trafila + spina ancorata.............. 291,00  € Hole die with anchorate pin OVAL Spina ovale liscia................ 808,00  € Polished oval pin Spina filettata scomponibile (per Bracciali ovali)....... 1.965,00 € Decomposable thread pin (for oval bracialets) Portatrafile oscillante...................... 347,00 € Oscillating die-holed support Foro di trafila più spina ancorata per formare i tubi sagomati...... 902,00  € Hole dies with anchorate pin for making the light sections tubes Attrezzatura per costruzione di spirali in continuo con testa oscillante....... 303,00  € Equipment for building of continuos spirals with swinging head Mandrino a 3 cagnoli con ghiera.......... 450,00  € Chuck three jaws with nut - Guidafilo ottico....... 3.400,00 € Optic thread guide Availability: Ex-Factory, Italy Check the latest exchange rate