New GoldPro® Balestri BT-SCRB-900 Fume Scrubber Tower

DESCRIPTION: The unit is used to neutralize the fumes generated by chemical processes involving the use of acids, that cannot be directly released in the atmosphere. It is composed of one scrubber where a neutralizing solution is pumped from a tank placed at the bottom and sprayed through nozzles into the fumes flow. The unit is entirely made of polypropylene (PP), the vertical section (the scrubber) has a diameter of 900 mm. The height of the unit is 5.000 mm. The fumes are channeled through filling packs (PVC corrugated sheet) that facilitate their condensation and subsequent washing. The height of the internal filling material is 3 meters. A final section of droplet separators is also installed inside the tower. The tank is provided with an inspection window for the periodical check of the scrubbing solution. The pump installed has a maximum capacity of 9mc/h. The suction fan has a maximum capacity of 2000 mc/h. Equipped With: OPTIONAL EQUIPMENT TO BE INSTALLED ON THE FUMES SCRUBBER: BT-SCRB-AUT-001 pH AND CONDUCTIVITY CONTROLLERS FOR FUMES SCRUBBERS 1 pH meter and electrode 1 Conductivity meter & probe 1 Caustic soda dosing pump (controlled by the pH meter) 1 Automatic water integration Min & Max water level sensors Control board The proposed fumes scrubber can be equipped with the following instruments for the automatisation of the unit: a dosing device for NaOH administering, which is regulated by a pH reader. Also, a conductivity meter is provided to control the status of the neutralizing solution. Thanks to the instrument, the worn out solution is disposed in an exhausted liquid storage tank (not included in the present quotation) and replaced with a new one. All those instruments are mounted on a control board, with a very userfriendly set up. Ex-Factory, Italy Packing & Freight TBD