5853993Italimpainti12900.0Equipped With: - Comes with 6 graphite crucibles - Thermocouple Features: - Absolute alloy homogeneity guaranteed by the medium frequency converter - Reduction of melting losses due to uniform temperature distribution on the melting material. This avoids the ‘skin effect’ typical of high frequency convertersGeneral Jewelry MachineryMelting & Continuous Castingnew6677-180Pawtucket, RIhttps://www.goldmachinery.com/listings/5853993-italimpianti-ceia-6-kg-induction-melter-melting-oven-furnace-new-in-stockFIM 6220v / 3 phase / 50/60 cyclekW 5.55.16kg Au1517006485mm x 510mm x 915mm190 Kg60mm Interior Diameter x 80mm Exterior Diameter x 125mm Int. Heighthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7196b4764321d4a76bfeacc927764f4/original-1709433887.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/057e0a82926c72495a3c63f46f5546d8/original-1709433887_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6442ea86cf89f971c1c25bb0cc38f45e/original-1709433887_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/939ef19803c4e480848b05005d8a2ef7/original-1709433887_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ce5e1501064daa2ade9cf1dd1498c75/original-1709433887_5.jpg2025-10-01 14:22:19 UTC6151738WORKING CYCLE TIME IN 24 hours = 3 BATCHES This refining plant is used to obtain gold with purity of 999,9 ‰(thousandths)using gold alloy anodes with a gold content of approx 990-995 ‰ (thousands) every 24 hrs the production of fine gold goes from 6 to 12 kg (and even more) for each of the 2 tanks that are seated in the plant. Technical Features: Main structure and suction hood made in pps and complete with frontal sliding transparent panel. 2 electrolytic tanks made of pps with 20 mm thickness. Approx volume= 40/45 liters each tank Suction system under the hood. Grazing suction system over the tanks Suction pipeline placed behind the hood. This pipeline is easily dismountable to allow cleaning operations and recovery of the gold chloride deposited inside the pipes during the electrolytic refining process. Tipping extractable cover over each electrolytic tank. Removable safety tank placed under electrolysis tanks. 1 condenser made of pp and complete with internal pvdf pipe coil placed on the hood side. The condenser must be connected to an external cooling system.(chiller or water recycling tank That will be quoted separately. the condenser is also equipped with a counter-wash system that allows total recovery of the gold chloride deposited inside the condenser formed during the fumes suction of the electrolytic refining process. The fumes exit pipe from the condenser is ø 160 mm complete with butterfly valve. Main switchboard to control all the plant functions (t° control, recycling pumps etc.) Each Tank is Equipped With: 1 magnetic propeller pump made of pvdf for the continuous recycling of electrolytic solution into the tank. 1 thermo-regulated heater made of Teflon which absorb 1500 watt 1 level control sensor device. 3 rear copper bars (2 positive + 1 negative) for current rectifier connection and complete with anodes and cathodes contacts. 5 cathodic bars made of titanium complete with n°5 special hooks in titanium for holding the cathodes made of rolled thin pure gold. 4 anodic bars made of titanium complete with n°4 special hooks in titanium for holding the gold anodes which are covered with meraklon cloth bags in order to collect any eventual metallic impurities. Chemical Characteristics: With an electrolytic solution containing about 70/80 gr aucl3 in appropriate concentration each tank can produce about 6/12 kg fine gold (999,9) every 24hrs. To increase the production is possible to change the composition of the electrolytic solution adding more AuCl13 Other Components: RECYCLING TANK FOR WATER USED IN THE CLOSE CIRCUIT COOLING SYSTEM OF ELECTROLYTIC GOLD REFINING PLANT. volume = 1200 lts. approx double reinforcements on the tank recycling pump with immersion impeller 700h mm. main switchboard STABILIZED CURRENT RECTIFIER TYPE 1000A-10V WITH 2 POSITIVE EXITS AND 2 DIGITAL VOLT-AMPEREMETERS TO CHECK CURRENT IN ELECTROLYSIS CELLS 1 AND 2. forced air cooling system 2 POSITIONS HAND-WASH BASIN MADE OF P.P.8 mm WITH FORCED FILTRATION SYSTEM. 2 taps, level sensor and decantation tank with cartridge filter THERMOSTATIC STOVE DRYER T5510 FOR DRYING GOLD AND SILVER GRAINS, CRISTALS AND JEWELLERY ITEMS WITH 10 EXTRCTABLE PLANES 50x50cm AND 6 EXTRACTABLE PYREX CONTAINERS FUMES WASHING TOWER Ø 600 mm. FOR WASHING ACID EMISSIONS FROM PRECIOUS METALS CHEMICAL PROCESSES. 1 BASAMENT USED AS RECYCLING TANK. 1 FUMES WASHING SECTION FILLED OF SPECIAL RINGS. 1 MAIN SWITCHBOARD Pricing Starting at 52.000,00 Euros Ex-Factory, ItalyRefining EquipmentGold RefiningusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151738-used-gold-refining-by-electrolysis-process6-12+ Kg ALLOY MAXIMUM PER CYCLEFROM 999,0/5 TO 999,9/1000500x300x400h mm each.220 v or 380 v  threephase.0.75 kw750x450x1300h mm0.75 kw1000 ampere / 10 volts750x450x1300h mm0,25 hp.approx. 55 kg.0,25 Kw.2750/3350 rpm0,55 Kw – 2700 rpm.0.8 Kw. APPROX.700x1500x2800h mm.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30ccbc82188810705b63a8c6bf1c2a28/original-gold_refining_plant-e1503416998909.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a50bc632253611de1bae8d67278b497/original-747858-handwashing-basin.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a5b3af84034d34f51504f5a86e17b55/original-774335-thermostatic-stove-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21c380fc765af18f97571a7566df5a62/original-gold-refining-by-electrolysis.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79f5e26e47dfd4d88b010d2a5bc22c1d/original-towers-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73d724fe0368055ac6955b0590938947/original-Silver-and-gold-electrolytic-refining-1024x286.jpg2024-09-25 15:38:15 UTC6151739Our plants are designed for the production of high quality Gold potassium cyanide (GPC) 68% K[Au(CN)2]. We realize plants of different capacity, according to customers’ request, from 3 kg to 10 kg per batch (the duration of a production cycle is about 8 hours). The plant is formed by a polypropylene structure, which houses: An electrolytic cell for gold dissolving and preparation of the gold potassium cyanide solution, connected to a rectifier A crystallization unit for the transformation of the gold potassium cyanide solution into salt, connected to a chiller unit An electrolytic cell used for the recovery of gold from the mother liquors, connected to a rectifier. It is advisable to install a suitable fume scrubber and an effluent treatment system in order to remove the KCN from the exhausted liquids. Ex-Factory, ItalyRefining EquipmentGold RefiningusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151739-used-gold-potassium-cyanide-gpc-production-planthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97058285bd0121231c8f070fa8a96d49/original-15-e1503420572160.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c72b9d67497d50fd101141e2d38fb081/original-16.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b3ac167aabe703deab7be3495fbae9b/original-PGC_plant_01-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f02bddd24a1dfc7c93fc287490e4fd2/original-PGC_plant_02-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0d59ecd042f9b39c7203a264b5c826c/original-PGC_plant_03-682x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb83dcd3fe0365f5c88d51cad8b1bd49/original-PGC_plant_04-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aec655f16e278007f06253a22bf1aa17/original-PGC_plant_051-682x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5739742f4850e991487f8277a76b0fdc/original-PGC_plant_06-662x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2d528a0a3a57ebb8519a14bfa93f054/original-PGC_plant_07-682x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45da12981f0ea744df6385a61b4673ea/original-PGC_plant_08-672x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f73c41abac37c99e8299b19da9283911/original-PGC_plant_09.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7ebd8a3327b621f145502643e8017ca/original-PGC_plant_10.jpg2024-09-25 15:38:20 UTC6151740ELECTROLYTIC SILVER REFINING TANK TYPE FIOA MADE OF P.P., COMPLETE WITH SPECIAL IMMERSED SCRAPING COMBS SYSTEM. Complete System Consisting of: 5 anodic bars made of titanium with central slot for baskets insertion. 5 high conductivity titanium baskets that also prevent ag anodes falling. 5 pp bags to cover the titnium baskets in order to contain the silver sludge produced during the electrolysis.(the sludges may contain au,pt,pd) 6 cathodic plates welded to relevant cathode bar. Total cathodic area = 1 sqm approx. 11 contacts for anodic & cathodic bars. 2 flat copper bars to connect anodic / cathodic contacts. 1 motorised immersed scraping combs system positioned between anodes and athodes. Combs gear motor = 0,12 hp. Protection cover with outlet for the suction of fumes. RECYCLING TANK MADE OF PP FOR SILVER REFINING SOLUTION AND COMPLETE WITH IMMERSED PROPELLER PUMP volume = 500 lts. approx double reinforcements on the tank recycling pump type 7/10 with immersed impeller 1000h mm. inlet and outlet of the solution are placed in the middle of rear wall in order to allow the positioning of this tank either on left or right side of the silver refining tanks. main switchboard STABILIZED POWER CURRENT RECTIFIER 1500 AMP air cooling system WHEELED VACUUM FILTERING UNIT MADE OF PP USED TO FILTER SOLUTIONS COMING FROM PRECIOUS METALS REFINING PROCESS OR FROM OTHER SOURCE TYPE BP630 COMPLETE WITH MAGNETIC PROPELLER PUMP. buchner filter internal ø 616 mm, height 200mm, preconfigured for paper filter ø 600mm. extractable meraklon cloth bag. cover for buchner filter complete with clamps and inlet solution tube 16 s/steel clamps. funnel under the buchner filter transparent level check with top decompressionvalve. p.p. flange rotating wheels safety valve for vacuum magnetic propeller pump complete with by-pass STANDARD HOT AIR DRYING AND WASHING CENTRIFUGE MADE OF S/STEEL AISI 316 autocentering stainless steel basket ø 350 mm. 1 acid proof filter bag for the basket 1 s/steel cover with funnel for introducing washing water. 1 s/steel cover with heating complete withblowing fan for drying. 1 heating resistance 1 main switchboard with all controls 1 motor 1,0 hp HIGH POWER WATER JET VACUUM PUMP TYPE “FIOA INT.”FOR CHEMICAL PLANTS AND REFINING PLANTS THAT WORKS UNDER VACUUM. THERMOSTATIC STOVE DRYER T5510 FOR DRYING GOLD AND SILVER GRAINS, CRISTALS AND JEWELLERY ITEMS WITH N°10 EXTRCTABLE PLANES 50x50cm AND N°6 EXTRACTABLE PYREX CONTAINERS. UNIT FOR WASHING ACID FUMES PRODUCED DURING REFINING AND HOLLOWING PROCESSES TYPE FIOA/1T 1000 2 POSITIONS HAND-WASH BASIN MADE OF P.P.8 mm WITH FORCED FILTRATION SYSTEM. Pricing Starting at 84.000,00 Euros Ex-Factory, ItalyRefining EquipmentSilver RefiningusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151740-used-silver-refining-by-electrolysis-process6000 lts./h95x55x110h cm.0,55 kw0.55 kw.95x55x110h cm.1500 ampere6 volts30 a.3,75 kw.130 lt.12mm.700 r.p.m.max. 40 kg.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e1bd2eebf94cc3db14bc1a9cbbdd3b6/original-780322-e1503419226836.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89c2e2929473169b9b34e64913306c56/original-721013-vacuum-fiter.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cb879ee44f5bb98524d695d55713f69/original-747858-handwashing-basin1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b73d73d28687facd43588aba0fe102dd/original-763890-Vacuum-pump-696x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44bde34b4df4f829e37d06bde226d4ad/original-774335-thermostatic-stove1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b573e2146024932c258635588fa843e7/original-silver-refining-plant.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29f2961e3e7faaf10dc3aa00af33cf92/original-702685-hot-air-centrifuge-768x1024.jpg2024-09-25 15:38:15 UTC6151741220V/1PH/50-60HZ Gas ProductionL 0.8 M3/hour The ammonia cracker is used for the production of a mixture of 75% hydrogen and 25% nitrogen Equipped With: Stainless steel heat exchanger Factory ManualsRefining EquipmentAmmonia Crackersused2471-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6151741-used-2471-180-italimpianti-ammonia-cracker-dissociator-model-dnh3-c0.8 cubic meters per hour2.5 KW850 deg. C (1562 deg. F)0,5 ATE37" x 16" x 47" high154 lbs.6,500. Euros, ex-factory Italyhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79ce0e238a320af2545da6804111c6cc/original-021-e1486564689777.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ca99aa72c7ae00314f2cd805caf5288/original-025-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9849a32f0cca068254e850ce93c9752/original-026-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bfb4c84145594fb1044f7e5997d62b8/original-027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/966f1b87aeb9b241505840702af41051/original-028-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65765bc3d0b3e1e0d60c00a844bdbc44/original-020-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4595798a50b2dc7012cbd390b48e8412/original-0211-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e279e426515dc61537d05da06a64847c/original-022-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7a75c365bd15fc4c81c90007cd61289/original-023-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be3d3e886b6014184af0f1b1dcc51649/original-024-768x1024.jpg2024-09-25 15:38:18 UTC6151742SPECIAL S/STEEL FILTERING NET 1200 meshes/cm2ù TRANSMISSION GEARS IN OIL BATH. AVERAGE PRODUCTION PER HOUR: HARD MATERIAL (CRUCIBLES, BORAX ETC) 4 - 6 Kg/h APPROX. REGULAR MATERIAL (SWEEPINGS, BUFFING) 20-25 Kg/h APPROX.. Priced for 17.500,00 Euros Ex-Factory, ItalyRefining EquipmentBall Millsnew760277Pawtucket, RIhttps://www.goldmachinery.com/listings/6151742-new-goldpro-fioa-crushing-ball-mill-for-ashes-with-rotor-600-mmØ 600 mm.Ø. 580mm X 400mm (22.8"x15.7")Ø 160 mm.25 rpm.0,9 Hp1,1 Kw51" x 28" x 63" high820 Lbs APPROX.300,00 Euros60 Working Dayshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8cbc28211e630dedc0c42514ac6b39c/original-CRUSHING-MILL-_C3_98-600mm-CODE-760277-e1503422730495.jpg2024-09-25 15:38:13 UTC6151743SPECIAL STAINLESS STEEL FILTERING NET WITH 1200 meshes/cm2 TRANSMISSION GEARS IN OIL BATH. AVERAGE HOUR PRODUCTION: HARD MATERIAL (CRUCIBLES, BORAX ETC) 12 - 15 Kg/h APPROX. REGULAR MATERIAL (SWEEPING, BUFFING) 70-80 Kg/h APPROX.. Priced for 26.460,00 Euros Ex-Factory, ItalyRefining EquipmentBall Millsnew760278Pawtucket, RIhttps://www.goldmachinery.com/listings/6151743-new-goldpro-fioa-crushing-ball-mill-for-ashes-with-rotor-800-mmØ 800 mm.Ø. 800mm X 520mm (31.4"x20.5")Ø 200 mm.25 rpm.2,2 Kw2,5 Kw60" x 40" x 78" High1720 Lbs APPROX.400,00 Euros60 Working Dayshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fba072c288588bbdae901ac4976a0524/original-picture-with-door-open.jpg2024-09-25 15:38:13 UTC615174430LT – 4KG Maximum of Gold per 24 Hours Plastic Rotating Tumbler Aqua Regia Plant This is our most economical refining system! Interested in a quote? Please download our PDF questionnaire, fill out and E-Mail to DGold@goldmachinery.com Priced on Request, Please Contact Us Available Ex-Factory, ItalyRefining EquipmentGold RefiningusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151744-used-gold-refining-by-aqua-regia-rotating-plastic-tumblerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8de41c8826bfddae2256d04a8e471341/original-713128-AQUA-REGIA-GOLD-REFINING-PLANT-4-KG-MAX-DAY-e1503490811463.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de93267ade41dcc41edc5c917af6d582/original-713128-AQUA-REGIA-GOLD-REFINING-PLANT-4-KG-MAX-DAY1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0480b2483bea3fb13d44a4c3e381ed8f/original-780389-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2244d4417d1b14cee2ca28a161edc5bd/original-GRANULATOR-MACHINE-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5ef9ed6a4be202ff359c6252e8d9be9/original-IMG_9297-1024x768.jpg2024-09-25 15:38:15 UTC6151745AVERAGE HOUR PRODUCTION: * HARD MATERIAL (CRUCIBLES, BORAX ETC) 35 - 40 Kg/h APPROX. * REGULAR MATERIAL (SWEEPING, BUFFING) 120-150 Kg/h APPROX. Priced for 45.710,00 Euros Ex-Factory, ItalyRefining EquipmentBall Millsnew760280Pawtucket, RIhttps://www.goldmachinery.com/listings/6151745-new-goldpro-fioa-crushing-ball-mill-for-ashes-with-rotor-1200-mmØ 1200 mm.Ø. 1200mm X 560mm (47.2"x22")Ø 200 mm.7,5 Hp7-9 Kg5,5 Kw70" x 50" x 74" high3750 Lbs APPROX.500,00 Euros90 Working Dayshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/819149dd0b410adfecdf4819b8a1bb85/original-CRUSHING-MILL-_C3_98-1200-mm-e1504268502551.jpg2024-09-25 15:38:13 UTC6151746WORKING CYCLE TIME IN 24 hours = 3 BATCHES CONTACT US FOR LARGER QUANTITIES UP TO 300 KG PER DAY Technical Features: nr.1 cylindrical borosilicate glass reactor 50lt volume type dn 400 with discharge valve and Equipped With: Borosilicate glass top cover dn 300,central dn 50 to hold the stirrer drive. n° 1 stirring group with lapped static ring, drive, steel/ptfe shaft, “u” shaped stirring blade, adjustable mechanical seal set made of Teflon and complete with motor. nr.1 motor for stirring group 0,12 kw complete with speed variator and flexible connection. nr.1 electrical heater for the reactor 50 lt complete with bottom protection cover made of aluminum and protected with fiberglass. nr.1 thermocouple for reading the temperature. nr.1 condenser with showers to wash and recovery the salts of gold chloride evaporated during the reaction. nr1. graduated feed vessel lt.10 complete with connection, charging and discharging valve, vacuum and breather pipe, top cover dn 100. nr.1 graduated feed vessel lt.20 complete with connection, charging and discharging valve, vacuum and breather pipe, top cover dn 100. nr.1 p.p. underlying safety tank. Section B – Filtration: nr.1 spherical glass borosilicate container vol. 80 liters approx. nr.1 buchner filtering unit made of pp dn 400 complete with glass top cover and n°3 necks. * the central neck used for charging the gold solution coming from reactor in position a. * the lateral neck complete with valves for fast connection with vacuum or breathing. * motorized system to lift the glass cover of the buchner filter. nr.1 security tank made of p,p, underlying. nr.1 centrifugal magnetic pump of pvdf type 80 – 0,25 kw rapid connections dn 25. Double valve and security filter to regulate the flow of the gold chloride solution just filtered and cooled that will be delivered to the reactor/precipitator section c. nr.1 cylindrical borosilicate glass reactor 70lt volume type dn 400 This Reactor is Equipped With: Borosilicate glass top cover dn 300/50 to hold the stirrer drive. nr.1 stirring group complete with: lapped static ring, drive, steel/ptfe shaft, turbine shaped stirring blades Adjustable mechanical seal set made of Teflon and complete with motor. nr.1 motor for stirring group:0,12 kw complete with speed variator and flexible connection. n°1 discharging valve dn 50. n°1 electrical heater for the reactor lt. 50 complete with bottom protection cover made of aluminum and protected with fiberglass. nr.1 thermocouple for reading the temperature. nr.1 condenser with showers to wash and recovery the salts of gold chloride evaporated during the reaction nr.1 graduated feed vessel lt.10 complete with connection, charging and discharging valve, vacuum and breather pipe, top cover dn 100. nr.1 graduated feed vessel lt.20 complete with connection, charging and discharging valve, vacuum and breather pipe, top cover dn 100. nr.1 p.p. underlying safety tank. the plant is complete with a final condenser which collects all eventual gold chloride residuals before conveying the fumes to washing towers. Unit is Complete With: Teflon connection pipes for vacuum transfer of the solutions. n°1 main switchboard to control all the unit operations. n°1 holding structure made of zinc plated pipes type kk. n°1 connecting glass pipe line complete with reduction curves etc. Flanges, inserts, gaskets, s/steel nuts. Epoxy paint for holding structure protection once assembled. Interested in a quote? Please download our PDF questionnaire, fill out and E-Mail to DGold@goldmachinery.com Pricing Starting at 140.000,00 Euros Ex-Factory, ItalyRefining EquipmentGold RefiningusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151746-used-gold-refining-by-aqua-regia-process8/10 Kg ALLOY MAXIMUM PER CYCLEFROM 999,5 TO 999,8-9/1000Reactor for the chemical etching90 lt/minReactor for etching or precipitation5450x2900x4100h mm including platform and stairs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f03734aea645a2f3de92ddd32b3c624/original-aqua-regia-refining-and-sedimentation1-e1503492738370.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/572d0be785f8ff0d818ca601d9494721/original-aqua-regia-refining-and-sedimentation2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6278ae3a41e52a069d7aaff35d12c425/original-gold-refining-step-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd145f59b84e65b3cc6a904455a0a784/original-refined-gold-powder-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acf10983e1547b51306386b6ce98b01e/original-towers1-768x1024.jpg2024-09-25 15:38:15 UTC6151747GEMSTONES REMOVAL SYSTEM – PRECIOUS STONES CHEMICAL REMOVAL MACHINE This system will allow your Company to offer a top quality stone removal service combining advanced chemical know-how and technology. Removing stones by hand is risky,because of the high risk of scratches and breakages of the diamonds, and in addition, the whole process can be also quite expensive and time consuming. This is why our diamond removal system is very requested by our Costumers. This machine is the result of decades of studies and real working experience, in fact this system it’s extremely efficient, stable, and makes the work for the operator super-easy and totally safe, by performing a non-destructive method of gemstone removal and recovery , using a metal dissolving process under a totally safe protected environment. Avoid any risk of scratches and breakages of the stones Recover the high purity gold of the “close”. Make the whole process extremely fast and super-easy. Reduce the costs. Totally safe for both, the operator and the environment Do not hesitate to contact us for further information: dgold@goldmachinery.com CONSUMMABLES: * NITRIC ACID 65% -(PURCHASE LOCALLY) *Litmus paper pH 1-11. (cod. 919550) *Manual PP pumps with battery, used for transfer demineralized water (cod. 553775) Availability: Ex-Factory, Italy Price: Contact for Pricing Listed price subject to manufacturers price increases without notice.Refining EquipmentGold RefiningnewPawtucket, RIhttps://www.goldmachinery.com/listings/6151747-new-goldpro-gemstones-removal-system-precious-stones-chemical-removal-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bab68c607bde28cc2c7e03adaf930c5/original-GEMSTONE-REMOVAL1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9dc8b0b3f7be8e37aa60fc3b65c92451/original-high-purity-fine-gold-obtained-from-precipitation-.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b77e93d7625b63c91434f37fa215f322/original-ffff.jpg2024-09-25 15:38:13 UTC61517481 RECYCLING TANK POSITIONED IN THE BASAMENT TO CONTAIN THE ALKALINE WASHING SOLUTION. IMMERSED PROPELLER PUMP. PHMETER AND DOSING PUMP TO CONTROL THE TANK pH. N°2 SPRAYING SYSTEM RING SHAPED EASY TO DISMOUNT. N°2 FUMES WASHING SECTIONS FILLED WITH SPECIAL RINGS FOR GAS/LIQUID CONTACT. 1 ASPIRATOR INVERTER TO REGULATE THE ASPIRATOR SPEED MAIN SWITCHBOARD WITH ALL CONTROLS. Priced for.. € 15.800,00 Euros Ex-Factory, Italy Packing & Freight TBDRefining EquipmentFume ScrubbersnewFIOA/1T 1200Pawtucket, RIhttps://www.goldmachinery.com/listings/6151748-new-goldpro-fioa-1t-1200-fume-scrubber-towerØ 1200 mm.680 mc/h.Ø 250 mm.Ø 250 mm2 Kw APPROX.1500 x 2500 x 500h mm1500 x 2500 x 4500h mm400 V. THREEPHASE + N + Ghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b0d44fada2ec938bba663dddf536524/original-SINGLE-SCRUBBER-1-e1503493037617.jpg2024-09-25 15:38:13 UTC6151749Scroll Down To See Video! Technical Details Upon Request Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks PRICED ON REQUEST PLEASE CONTACT USRefining EquipmentBelt FurnacesnewMaster-SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151749-new-goldpro-bertoncello-master-series-belt-brazing-furnacehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba545e843ba377eb2d24a9754bc0b9b2/original-MASTER-WATCH-e1503501271903.jpg2024-09-25 15:38:13 UTC61517501 RECYCLING TANK POSITIONED IN THE BASAMENT TO CONTAIN THE ALKALINE WASHING SOLUTION. N°2 IMMERSED RECYCLING PUMP PHMETER AND DOSING PUMP TO CONTROL THE TANK pH. N°2 SPRAYING SYSTEM RING SHAPED EASY TO DISMOUNT. N°4 FUMES WASHING SECTIONS FILLED WITH SPECIAL RINGS FOR GAS/LIQUID CONTACT. 1 ASPIRATOR INVERTER TO CONTROL THE ASPIRATOR SPEED MAIN SWITCHBOARD WITH ALL CONTROLS. Priced for.. € 27.200,00 Euros Ex-Factory, Italy Packing & Freight TBDRefining EquipmentFume ScrubbersnewFIOA 2T/1200Pawtucket, RIhttps://www.goldmachinery.com/listings/6151750-new-goldpro-fioa-2t-1200-fume-scrubber-towerØ 1200 mm.680 mc/h.Ø 250 mm.Ø 250 mm2 Kw APPROX.1500 x 4000 x 500h mm1500 x 4000 x 3500 up to 4500h mm400 V. THREEPHASE + N + Ghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d6c84e0941f331c6d83c9d40fa31208/original-DOUBLE-SCRUBBER-1-e1503493502824.jpg2024-09-25 15:38:13 UTC6151751THIS TYPE OF FILTER PRESS IS PARTICULARLY SUITABLE FOR DISCHARGES COMING FROM ALL PRECIOUS METALS FACTORY SECTIONS. 30 PLATES MADE OF P.P. COMPLETE OF DRAINAGE MADE OF PLASTIC MATERIAL 30 DOUBLE TWIN FILTERING CLOTHS MADE OF P.P. OR OTHER MATERIAL IN ACCORDANCE WITH NECESSITIES TIGHTENING OF THE FILTERING PACKS BY MEANS OF OLEODINAMIC PISTON CONTROLLED BY SWITCHBOARD FILTER PRESS FRAME MADE OF ELECTROWELDED STEEL PAINTED WITH EPOXY RESIN THE FRAME IS COMPOSED BY: 1 FIXED HEAD 2 SIDE BEAM 1 MOBILE PRESS HEAD PLATE WHICH SLIDES ON THE SIDE BEAMS CLAMPING SYSTEM FOR THE FILTERS BY MEANS OF CENTRAL SCREW AND BY LEVER HYDRAULIC JACK WHICH WORKS AT HIGH PRESSURE. UNDERLYING RECOVERY VESSEL MADE OF PP TO COLLECT THE WATER COMING FROM THE FILTERING PLATES FILTER PRESS FEEDING PUMP OF NEW TYPE EQUIPPED WITH ACID PROOF DOUBLE MEMBRANES PNEUMATIC PUMP EQUIPPED WITH ACID PROOF VALVES PNEUMATIC PUMP EQUIPPED WITH ACID PROOF VALVES Priced for.. € 36.000,00 Euros Ex-Factory, Italy Packing & Freight TBDRefining EquipmentFilter Pressnew720160Pawtucket, RIhttps://www.goldmachinery.com/listings/6151751-new-goldpro-fioa-filter-press-type-fioa-63030-complete-with-10-plates-630x630-mm-and-equipped-with-acid-proof-membrane-pneumatic-feeding-pump27 square meters.630x630 mm3 Hp8 atm3 Kw3100x1000x985h mm1200 Kg. APPROX.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e07ae897bdae6ecc70c855af6d50812/original-filter-presses1-e1503498687378.jpg2024-09-25 15:38:13 UTC6151753BalestriBT-SCRB-900DESCRIPTION: The unit is used to neutralize the fumes generated by chemical processes involving the use of acids, that cannot be directly released in the atmosphere. It is composed of one scrubber where a neutralizing solution is pumped from a tank placed at the bottom and sprayed through nozzles into the fumes flow. The unit is entirely made of polypropylene (PP), the vertical section (the scrubber) has a diameter of 900 mm. The height of the unit is 5.000 mm. The fumes are channeled through filling packs (PVC corrugated sheet) that facilitate their condensation and subsequent washing. The height of the internal filling material is 3 meters. A final section of droplet separators is also installed inside the tower. The tank is provided with an inspection window for the periodical check of the scrubbing solution. The pump installed has a maximum capacity of 9mc/h. The suction fan has a maximum capacity of 2000 mc/h. Equipped With: OPTIONAL EQUIPMENT TO BE INSTALLED ON THE FUMES SCRUBBER: BT-SCRB-AUT-001 pH AND CONDUCTIVITY CONTROLLERS FOR FUMES SCRUBBERS 1 pH meter and electrode 1 Conductivity meter & probe 1 Caustic soda dosing pump (controlled by the pH meter) 1 Automatic water integration Min & Max water level sensors Control board The proposed fumes scrubber can be equipped with the following instruments for the automatisation of the unit: a dosing device for NaOH administering, which is regulated by a pH reader. Also, a conductivity meter is provided to control the status of the neutralizing solution. Thanks to the instrument, the worn out solution is disposed in an exhausted liquid storage tank (not included in the present quotation) and replaced with a new one. All those instruments are mounted on a control board, with a very userfriendly set up. Ex-Factory, Italy Packing & Freight TBDRefining EquipmentFume ScrubbersnewBT-SCRB-900Pawtucket, RIhttps://www.goldmachinery.com/listings/6151753-balestri-bt-scrb-900-fume-scrubber-tower900 MM x 5,000 MMPVC Corrugated Sheets9 mc/h2.000 mc/h400 Volt / 50 Hz / 3 Phase3KWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/551aa0739ac02013b938f44865530332/original-bt_tower.jpg2025-03-06 14:48:11 UTC6151754Standard temperature of machine is 950 Degrees Celsius Power Supply 230/400V 50/60Hz / 3 Phase A Dissociator is available upon request Electrical furnaces for annealing, deoxidation and heat treatment of gold and silver alloys in a controlled atmosphere for products such as wires, strips, tubes, sheets, etc.. These furnaces can feature manual blade systems, pivoting systems for eutectic immersion, semiautomatic systems and totally automatic PLC-controlled systems which memorise all the work parameters. All our models of furnaces can be fitted with an ammonia dissociator or be prepared for a hydrogen/nitrogen mixer. Machine Models & Specifications: Available Ex-Factory, Italy Priced Upon Request, Please Contact UsRefining EquipmentDeoxidation Quench FurnacenewZO_SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151754-new-goldpro-ikoi-zo-series-deoxidation-furanceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98516cb74fb38b2f6f743c89120ac74c/original-17-e1503582937965.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd31aa52f1d0060d24f07f8dabfe0390/original-deoxidationspecs.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70a55961f37ba0c7d473592a09ebb9bc/original-18.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edf5ce7eabf4af760f888b1572a1c569/original-21.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/234ac8f2020090fe75efd404e85061a5/original-31.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ef74387e54757bc845c643429dcfa04/original-41.jpg2024-09-25 15:38:14 UTC6151755DRAWER TO RECOVERY THE ASHES. CHAMBER FOR FUME'S DECELERATION. POST-COMBUSTION CHAMBER WITH METHANE OR LPG BURNER. BURNER TO START COMBUSTION PLACED UNDER THE GRID OF THE INCENERATING CHAMBER. PIPE UNION FOR FUMES OUTLET WITH ADJUSTABLE AIR LOCK. 1 MAIN SWITCHBOARD. TOTAL ABSORBEED POWER = 0,5 Kw APPROX. Available Ex-Factory, Italy Priced for.. €35.500,00 EurosRefining EquipmentIncinerators / Ash & Pyroylsis Furnacesnew731886Pawtucket, RIhttps://www.goldmachinery.com/listings/6151755-new-goldpro-fioa-small-size-incinerator-for-sweepings-buffings-and-scraps600x700x700h380 V - 3 Ph + N + T.1500x950x1900h mm.1800 Kg APPROX.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a1ed28699cab7f0108bd409cf0a139e/original-731886-incinerator.jpg2024-09-25 15:38:13 UTC615175634687.0The machine is for grinding crucibles, boraxes and other rubbish after having burnt them. Steel rotor diam. 1200 mm. Motor with hydraulic coupling. Driving gears in oil-bath. Feed input totally free diam. 200 mm. Filtering gauze in inox steel, 1200 mesh in sq. cm. Iron balls. The machine is suitable for large productions. Installed horse power 5.6 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 1850 mm Width 1450 mm Height 2000 mm (without base) Approx.Weight 1700 kg Optional: Soundproof cabin made in perfectly rule ISO 3746 -1979; D.Lgs.277/91, €7.458,00 Availability: Ex-Factory, ItalyRefining EquipmentIncinerators / Ash & Pyroylsis Furnacesnewm12Pawtucket, RIhttps://www.goldmachinery.com/listings/6151756-new-tvn-mod-m12-balls-mills-for-crushing-ashes-crucibles-and-borax-1200mm-rotor-diameter35-40 kg. per hour.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2899ea9c6d45f7a140aeb352c08bf3f3/original-m12.jpg2024-09-25 15:38:13 UTC6151757Heating of one or more independent zones. Radiating elements with high efficiency and low energy consumption. Radiating elements protected fromaccidental impact. Homogenization system of the internal temperature. Rotary table made of crushproof steel. Heated exhaust waxes system and collection steel container of easy removal. Use in automatic / manual mode. Interface colour touch screen user friendly. 100 storable programs. Printing system parameters at end of cycle. Continuous diagnostics of alarms and security sensors. Removable electric cabinet to reduce clutter. Programmable delay start of the furnace.Automatic operated door. Automatic recall of the position of the cylinder. Models & Specifications: Available Ex-Factory, Italy PRICING UPON REQUESTRefining EquipmentBurn-Out Ovens / FurnacesnewAlpha-SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151757-new-goldpro-bertoncello-alpha-series-cast-cylinder-burnout-electric-furnace-with-rotary-tablehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b5c115e43ac4a117cc9bd9f6299d3bd/original-alpha17-e1503501555530.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f594c44aafd07ade12e4ccd61253629/original-alpha-casting.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1fbfe2b59c471aebda1351544bcd5b1e/original-alpha_specs.jpg2024-09-25 15:38:13 UTC615175813885.0The machine is for grinding crucibles, boraxes and ordinary rubbish after having burnt them. Steel rotor diam. 600 mm. Driving gears in oil-bath. Feed input totally free diam. 160 mm. Filtering gauze in inox stell, 1200 mesh in sq. cm. Iron balls. The machine is suitable for small productions. - Rubbish production per hour: 20-25 kg. Installed horse power 1,1 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Optional: Soundproof cabin made in perfectly rule ISO 3746-1979; D.Lgs.277/91, €6.662,00 Availability: Ex-Factory, ItalyRefining EquipmentIncinerators / Ash & Pyroylsis Furnacesnewm6Pawtucket, RIhttps://www.goldmachinery.com/listings/6151758-new-tvn-mod-m6-balls-mills-for-crushing-ashes-cruicibles-and-borax-600mm-rotor-diameter3-4 kg.140C mm80C mm170C mm35C kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/203e99477aba1f0d8101dfaa0d7a3618/original-m6.jpg2024-09-25 15:38:13 UTC615175919790.0The machine is for grinding crucibles, boraxes and any other rubbish after having burnt them. Steel rotor diam. 800 mm. Motor with hydraulic coupling. Driving gears in oil-bath. Feed input totally free diam. 200 mm. Filtering gauze in inox steel, 1200 mesh in sq. cm. Iron balls. The machine is suitable for overage productions. Installed horse power 2.2 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 1580 mm Width 980 mm Height 2000 mm Approx.Weight 650 kg Optional: Soundproof cabin made in perfectly rule ISO 3746-1979; D.Lgs.277/91, €6.215,00 Availability: Ex-Factory, ItalyRefining EquipmentIncinerators / Ash & Pyroylsis Furnacesnewm8Pawtucket, RIhttps://www.goldmachinery.com/listings/6151759-new-tvn-mod-m8-balls-mills-for-crushing-ashes-cruicibles-and-borax-800mm-rotor-diameter70-80 kg. per hour.12-15 kg. per hour.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/352b939d5170fb5c6b26257aa94b4833/original-m8.jpg2024-09-25 15:38:13 UTC615176012300.0220v / 3 phase / 50/60 cycle absorbed power kW 5.5 Crucible Dimensions Int. diam. 60 mm Ext.diam. 80 mm Int. height 125 mm Equipped With: Comes with 6 graphite crucibles Thermocouple Features: Absolute alloy homogeneity guaranteed by the medium frequency converter Reduction of melting losses due to uniform temperature distribution on the melting material. This avoids the ‘skin effect’ typical of high frequency converters Better malleability of the alloys allowing for considerable section reductions without annealing Possibility to use different types of crucibles including graphite, clay-graphite, silicon carbide, etc. Automatic temperature control by immersion thermocouple or optical pyrometer Automatic power control regardless of quantity or type of metal Computerised alarm diagnostics available in four languages with trouble-shooting guide lines. Automatic turn-off function for the furnace and cooling plant if not used for a certain amount of time Pouring can be done by manual extraction of the crucible, tilting by handwheel or hydraulic tilting A closed cycle deionization system for cooling water is available as a standard feature on the larger furnaces. This system greatly reduces maintenance operations on these plants. THIS ITEM IS IN-STOCK FOR IMMEDIATE DELIVERY. Graphite Crucible + Holders Additional $84Refining EquipmentMelting Furnacesused6677-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6151760-used-6677-185-new-in-stock-italimpianti-fim-5nt-melting-furnace-for-gold-and-silver-alloys-5-1-kw-6-kg-au-manual-extraction-s-n-11925.1615T/O17006485x510xx915190 kgGold Machinery Pawtucket, RIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/148d70115bfc60aae3d012cfbd57f118/original-fim-nt.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10113354fe71e3d2001aea3d672c48ac/original-IMG_5305-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4324a50494b6f5031003c24a0410fc2/original-IMG_5306-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45ecce6647593e199545e613ef89db50/original-IMG_5307-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2eecce56a61b83cbd9760d123faaccc/original-IMG_5308-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/833cd61d2103805330043f8ecbfbd4aa/original-IMG_5309-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ba5c54c24bc501d35577fc47927d374/original-IMG_5299-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a6865b56b4449531473b2bc4aa1bff9/original-IMG_5300-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a487210fa36b51d3325ab24ca8ea0136/original-IMG_5301-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c5f8d2c7610ca00341b83b7bac3205a/original-IMG_5302-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67ee46f9eebdff4b4d4fec6ca4ddbab2/original-IMG_5303-768x1024.jpg2024-09-25 15:38:19 UTC6151761Introduction to Assaying The assaying process is a necessary step to determine the quantity of precious metals present in an alloy. Cupellation is one operation of the assay process in which a sample of gold, wrapped in lead foil, is melted in a special crucible known as a cupel: this cupel has the capacity of absorbing the non-precious metals contained in the gold alloy. The weight of the gold alloy sample is usually about 250/1000. Although this is the most ancient method to determine the purity of an alloy, assaying by means of cupellation gives greater precision than more modern methods (fluorescent or x-ray spectrophotometry) and is considerably less expensive. Consisting of: COLUMN DRILLING PRESS TYPE KI FOR ASSAY SAMPLE DETACHING ON/OFF SWITCH, PULLEY SYSTEM COVER, SCREW. SLIDE ROD SCREW, SLIDE ROD. PILLAR LOCKING HANDLE,TABLE LOCKING NUT. CHUCK,COLLAR,SAFETY GUARD, LIFT HANDLE. DRILL LIFT, DEPTH STOP. S/STEEL BOX TO RECOVERY THE ASSAY DETACHMENT DURING THE DRILLING OPERATION MAINS VOLTAGE V 230 MAINS FREQUENCY HZ 50 NO LOAD SPEED MIN- 600 – 2,500 CHUCK CAPACITY mm 13 PRICED FOR €340,00 Euros VIBRATION DUMPING TABLE FOR ELECTRONIC SCALES COMPLETE WITH MARBLE PLANE STANDING OVER SPECIAL RUBBER SMALL BLOCKS. PRICED FOR €920,00 Euros ELECTRICAL CUPPELLATION FURNACE TECHNICAL FEATURES: 3 COMMUTATORS EACH ONE TO CONTROL 2 SILITE RODS POWER SUPPLY. 3 AMPEROMETERS EACH ONE TO CONTROL 2 SILITE RODS POWER CONSUMPTION. 1 CARBORUNDUM MUFFLE, INTERNAL SIZE 170x225x105h mm 6 SILITE RODS. 1 AUTOMATIC SYSTEM TO MAINTAIN THE T°DURING THE NIGHT. FUMES DISCHARGE PLACED IN THE REAR SIDE OF THE FURNACE. IRON FUMES EXIT PIPE COMPLETE WITH MANUAL DISCHARGE SYSTEM TO REMOVE THE LEAD RESIDUALS PRODUCED IN THE PROCESS FUMES SUCTION HOOD PLACED IN THE FRONT AND REAR SIDE OF THE FURNACE. FURNACE BASAMENT 1000h mm WHICH CONTAINS ALL THE ELECTRICAL COMPONENTS. DIGITAL THERMOREGULATOR WITH N°2 SET POINTS WEEKLY PROGRAMMABLE TIMER. 1 REFRACTORY PLATE 16×22,5x10h mm (APPROX 6×9″) LONG THONGS FOR CUPELS. PRICED FOR €12.650,00 Euros WORKING BENCH FOR ASSAYS COMPLETE WITH MOTORISED ROLLING MILL AND ANNEALING PLATE MOTORIZED ROLLING MILL FOR PLATE. DEVICE TO PUSH THE SAMPLE THROUGH THE ROLLS. S/STEEL PLANE FOR HAMMERING THE SAMPLE. REFRACTORY PLATE FOR ANNEALING THE SAMPLE. GAS TORCH FOR ANNEALING THE SAMPLE. USED CUPELS DISCHARGING HOLE. MAIN SWITCH BOARD. SAFETY BUTTON TO STOP THE ROLLING MILL. PEDAL TO RUN THE ROLLING MILL PRICED FOR €5.700,00 Euros 12 POSITIONS CHEMICAL PARTING HOOD FOR PRECIOUS METALS ASSAY COMPLETE WITH FUMES WASHING SYSTEM 2 SIX POSITION HEATERS 1,3 Kw EACH FOR KJELDAL FLASKS. 2 SUCTION BOXES WITH 6 HOLES EACH ABOVE THE KJEDHAL FLASKS HEATERS. WASHING SYSTEM FOR ACID FUMES POSITIONED IN THE REAR PANNEL OF THE HOOD WITH ACID PROOF SPRAYERS 12 KJELDHAL FLASKS 100 cc EACH. 2 NARROW NECK BEAKERS 500 cc EACH. 1 FUNNEL FOR ACID LOADING. 1 PINCER FOR KJELDHAL FLASKS. 1 MANUAL TIMER. SUCTION FAN WITH BUTTERFLY VALVE FOR FUMES. WORKING PLANE 1500x500mm WITH BASIN. BASIN DISCHARGE SYSTEM COMPLETE WITH BY-PASS VALVES FOR EXTERNAL DISCHARGE INTO RECOVERY TANK OR DIRECTLY IN THE EMERGENCY TANK OF THE HOOD. EMERGENCY TANK TO RECOVERY EXHAUSTED SOLUTION (AgNO3) PLACED UNDER THE BASIN. BASEMENT WITH DRAWERS AND FRONT PANNEL MAIN SWITCHBOARD TO CONTROL ALL FUNCTIONS. PRICED FOR €9.700,00 Euros RECYCLING TANK FOR WASHING FUMES COMING FROM THE ASSAY HOOD TANK MADE OF PP WITH 10 mm THICKNESS. INTERNAL REINFORCEMENT. 1 MAGNETIC PUMP. 1 LEVEL EXTRACTABLE COVER COMPLETE WITH HANDLE. PRICED FOR €1.500,00 Euros SMALL ELECTRICAL FURNACE FOR ANNEALING GOLD SAMPLE IN 33×33 CRUCIBLE HETING BY MEANS OF HIGH QUALITY KANTHAL ELEMENTS. THERMOCOUPLE AND THERMOREGULATOR. PRICED FOR €2.400,00 Euros FUMES WASHING TOWER Ø 600 mm. FOR WASHING ACID EMISSIONS FROM PRECIOUS METALS CHEMICAL PROCESSES 1 BASAMENT USED AS RECYCLING TANK. 1 FUMES WASHING SECTION FILLED OF SPECIAL RINGS. 1 MAIN SWITCHBOARD PRICED FOR €6.700,00 Euros Total Lab Price € 39.910,00 Plus Packing, Crating and Loading Container Listed price subject to manufacturers price increases without notice.Refining EquipmentPrecious Metal Assay LaboratoryusedPawtucket, RIhttps://www.goldmachinery.com/listings/6151761-used-complete-fire-assay-laboratory-by-cupellation5350 Watt700x1500x2800h mm.900x750x900h mm1250 C0.8 Kw. APPROX.1,5 Kw100 Watt.BALL VALVE,ELBOWS, COUPLINGS, NIPLES, TEE ETC.0,25 Kw1100°C.210x320x145h mm220 V – SINGLEPHASE0,25 Kw.2750/3350 rpm0,55 Kw – 2700 rpm.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28c7266b31ba76f57972a074d8b16d26/original-layout-e1503495936939.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/945f614455e2365c894de3a7f3f55299/original-779430-Drilling-Press-762x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac97bc75719da1fa29d1706f1867c45e/original-Assay-Lab_Foto-31-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93ef8af7a900da1260adf3ca6583f9ba/original-Assay-Lab1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66aa8220a7e1686b0860d7dcf6ff79c8/original-770510-Vibration-dumping-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87bee4a2ecc505db6c2493817c579e2b/original-779430-Drilling-Press1-762x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/170e5e256b3c314d80e5202163ab56ce/original-assay-hood-University-of-Turin1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43fc03b3fe0ea9080801b5fd890740eb/original-730625_Assay-final-annealing-furnace-1001x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8aed9ff13406809105ea6955ae01bd8/original-725049-Threephase-cuppellation-furnace-FIOA-INTERNATIONAL-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e58ce7378a56c3876334dee62f6f94b/original-713015-working-plane-view-1024x632.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bad003862281a35893b4817c9932c5aa/original-705212_Assay-working-bench-with-electrical-heater.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f714f6b59e8aff4f062d252dc8095e16/original-705215_Assays-working-bench-with-various-equipments-and-consumables.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/870177ddee386195e406506c89aca234/original-713015-Chemical-etching-hood-with-recycling-tank.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/753e02b84bb05d56bdfc81dea870fb03/original-vibration-dumping-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/564227578dadfca134d68bfb0eecd3c6/original-IMG_4233-1024x682.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f585aeffc9d754d9fb98678d564ea771/original-IMG_3506-1024x682.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16d3f0e4b0bf2f45de9c38afabaa0c50/original-Assay-Lab_Foto-6-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a161ed626766def3ebbecea327c3467/original-assay-hood-University-of-Turin.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/466785b1d0487df60da3c13014748082/original-layout1-1024x720.jpg2024-09-25 15:38:24 UTC6151762Machine is used to reclaim precious metals from bombing solutions and planting wastes MADE OF POLY PROPYLENE Equipped With: Work Light Work Gloves This process is used by almost every company in the gold manufacturing community. The process involves the use of Potassium Cyanide, Hydrogen Peroxide (35%) and warm water. When Gold is processed in this solution a small explosion occurs releasing a cloud of toxic gas and a quantity of toxic water as well. The gold is stripped and made brighter in appearance (1% gold is lost in the process to the water solution).Refining EquipmentPlatingused0405-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151762-used-0405-700-chemical-bombing-recovery-system-for-casting-refining-precious-metals31" x 25" x 36"H36" x 36" x 85" High175 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71049b0797253553681af2580bc4a76e/original-tank-003-e1389973161405.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b3041fc108c3ec821274f7339e38864/original-tank-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e546980f31791d120765bde2dd03080/original-tank-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1f8d591c1c9023254c03ee262b1f73e/original-tank-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5ba7cc386a03bd721e74c148691a7d2/original-tank-0031.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca8b10b5dfa79098f384c4cc76b39bfb/original-tank-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f052848e76aa179c0e3f038d80d2017/original-tank-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0816c6db323e5b4aa7226e9f671f1ffd/original-tank-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d88e4cee425791444fa4513f8f56eaaa/original-tank-007.jpg2024-09-25 15:38:17 UTC615176316342.0The machine is for mixing the various powders ground by the mill. The basket and all the other elements in contact with the powders are built in stainless steel. with ball-controlled exhaust valve. Stainless steel basket 180 It. capacity. Motor with hydraulic coupling. Driving gears in oil-bath. Safety micro in both the upper openings. Installed horse power 2.2 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 1550 mm Width 650 mm Height 1250 mm Approx.Weight 300 kg Availability: Ex-Factory, ItalyRefining EquipmentIncinerators / Ash & Pyroylsis Furnacesnewmx180Pawtucket, RIhttps://www.goldmachinery.com/listings/6151763-new-tvn-mod-mx-180-mixer-for-homogenizing-the-crushed-ashes-180-it-capacityhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac52afb77b21e872c71332714e243205/original-mx180.jpg2024-09-25 15:38:13 UTC61517641980110V/1PH/60HZ Equipped With: Computer for data processor Less monitor & keyboard Instruction manual Training guideRefining EquipmentPrecious Metal Assay Laboratoryused2673-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6151764-used-2673-400-seiko-assay-machine-model-sea2001470 x 300 x 150mm(high)Air/vacuumauto shut off15KV, 50 KV - 2-step transfer1 - 63 UA (50KV), 1 - 255 UA (15 KV)RHair cooled10mm diameter, 3mm diameter+/- 0.3%/hr( 20+/- 1 deg. C.)Si(Li) semiconductor detector12mm²170 EV or lessberylium ( 10mm thick)10 literless than 1 liter per dayhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afda553ba1c827d6c5872b0e964de502/original-2673-1-MAIN-e1521722328694.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f64da81ae8bb61c69aac77e993b322e/original-2673-6-1024x567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23954a8420f546e692b47286ab734e3a/original-2673-7-1024x525.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e3df124e79c61dda27d128d7460d97c/original-2673-8-1024x860.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5372a8678d3ea06a9562369b515f9a8/original-2673-1-MAIN1-805x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/baa1adead4bc2bddddfcbf7b6b6cecc0/original-2673-2-845x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bad931dbd1ec3312757b9b4aa4c631c/original-2673-3-1024x407.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2abe8264fc16077d9732a1ed69c2845f/original-2673-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa8318ff95696b3a0ce652890766f2ce/original-2673-5-1024x1000.jpg2024-09-25 15:38:19 UTC61517652 SIX POSITION HEATERS 1,3 Kw EACH FOR KJELDAL FLASKS. 2 SUCTION BOXES WITH 6 HOLES EACH ABOVE THE KJEDHAL FLASKS HEATERS. WASHING SYSTEM FOR ACID FUMES POSITIONED IN THE REAR PANNEL OF THE HOOD WITH ACID PROOF SPRAYERS 12 KJELDHAL FLASKS 100 cc EACH. 2 NARROW NECK BEAKERS 500 cc EACH. 1 FUNNEL FOR ACID LOADING. 1 PINCER FOR KJELDHAL FLASKS. 1 MANUAL TIMER. SUCTION FAN WITH BUTTERFLY VALVE FOR FUMES. WORKING PLANE 1500x500mm WITH BASIN. BASIN DISCHARGE SYSTEM COMPLETE WITH BY-PASS VALVES FOR EXTERNAL DISCHARGE INTO RECOVERY TANK OR DIRECTLY IN THE EMERGENCY TANK OF THE HOOD. EMERGENCY TANK TO RECOVERY EXHAUSTED SOLUTION (AgNO3) PLACED UNDER THE BASIN. BASEMENT WITH DRAWERS AND FRONT PANNEL MAIN SWITCHBOARD TO CONTROL ALL FUNCTIONS. PRICED FOR €9.700,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay Laboratorynew713015Pawtucket, RIhttps://www.goldmachinery.com/listings/6151765-new-goldpro-fioa-12-positions-chemical-parting-hood-complete-with-fumes-washing-system1,5 Kw100 Watt.4 Kw. APPROX.2200x620x1900h mm.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9432da97ff49d90bd668482ba28c952c/original-713015-Chemical-etching-hood-with-recycling-tank1-e1503497847363.jpg2024-09-25 15:38:15 UTC6151766HETING BY MEANS OF HIGH QUALITY KANTHAL ELEMENTS. THERMOCOUPLE AND THERMOREGULATOR. PRICED FOR €2.400,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay Laboratorynew730625Pawtucket, RIhttps://www.goldmachinery.com/listings/6151766-new-goldpro-fioa-small-electrical-furnace-for-annealing-gold-sample-in-33-x-33-crucible1100°C.210x320x145h mm220 V - SINGLEPHASE4 Kw500x750x650h mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e27124238f3724a478232c255918f95/original-730625_Assay-final-annealing-furnace1-e1503497997825.jpg2024-09-25 15:38:15 UTC6151767COMPLETE WITH MARBLE PLANE STANDING OVER SPECIAL RUBBER SMALL BLOCKS. PRICED FOR €920,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay LaboratorynewnaPawtucket, RIhttps://www.goldmachinery.com/listings/6151767-new-goldpro-fioa-vibration-dumping-table-for-electronic-scales900x750x900h mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0c30939d6387f0ef5b4afc4b9518962/original-vibration-dumping-table1-e1503497462899.jpg2024-09-25 15:38:15 UTC6151768MOTORIZED ROLLING MILL FOR PLATE. DEVICE TO PUSH THE SAMPLE THROUGH THE ROLLS. S/STEEL PLANE FOR HAMMERING THE SAMPLE. REFRACTORY PLATE FOR ANNEALING THE SAMPLE. GAS TORCH FOR ANNEALING THE SAMPLE. USED CUPELS DISCHARGING HOLE. MAIN SWITCH BOARD. SAFETY BUTTON TO STOP THE ROLLING MILL. PEDAL TO RUN THE ROLLING MILL PRICED FOR €5.700,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay Laboratorynew705215Pawtucket, RIhttps://www.goldmachinery.com/listings/6151768-new-goldpro-fioa-working-bench-for-assays-complete-with-motorised-rolling-mill-and-annealing-plate0,75 Kw.1210x650x1390h mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41040662b2379de182257041ce2704eb/original-705215_Assays-working-bench-with-various-equipments-and-consumables1-e1503497648189.jpg2024-09-25 15:38:15 UTC61517693 COMMUTATORS EACH ONE TO CONTROL 2 SILITE RODS POWER SUPPLY. 3 AMPEROMETERS EACH ONE TO CONTROL 2 SILITE RODS POWER CONSUMPTION. 1 CARBORUNDUM MUFFLE, INTERNAL SIZE 170x225x105h mm 6 SILITE RODS. 1 AUTOMATIC SYSTEM TO MAINTAIN THE T°DURING THE NIGHT. FUMES DISCHARGE PLACED IN THE REAR SIDE OF THE FURNACE. IRON FUMES EXIT PIPE COMPLETE WITH MANUAL DISCHARGE SYSTEM TO REMOVE THE LEAD RESIDUALS PRODUCED IN THE PROCESS FUMES SUCTION HOOD PLACED IN THE FRONT AND REAR SIDE OF THE FURNACE. FURNACE BASAMENT 1000h mm WHICH CONTAINS ALL THE ELECTRICAL COMPONENTS. DIGITAL THERMOREGULATOR WITH N°2 SET POINTS WEEKLY PROGRAMMABLE TIMER. 1 REFRACTORY PLATE 16x22,5x10h mm (APPROX 6x9") LONG THONGS FOR CUPELS. PRICED FOR €12.650,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay Laboratorynew725049Pawtucket, RIhttps://www.goldmachinery.com/listings/6151769-new-goldpro-fioa-electrical-cuppellation-furnace1250 C8 Kw850x850x1600h mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94ed719a2cc6ff7a446f2fc191fe4e25/original-725049-Threephase-cuppellation-furnace-FIOA-INTERNATIONAL1-e1503497544473.jpg2024-09-25 15:38:15 UTC6151770ON/OFF SWITCH, PULLEY SYSTEM COVER, SCREW. SLIDE ROD SCREW, SLIDE ROD. PILLAR LOCKING HANDLE,TABLE LOCKING NUT. CHUCK,COLLAR,SAFETY GUARD, LIFT HANDLE. DRILL LIFT, DEPTH STOP. S/STEEL BOX TO RECOVERY THE ASSAY DETACHMENT DURING THE DRILLING OPERATION MAINS VOLTAGE V 230 MAINS FREQUENCY HZ 50 NO LOAD SPEED MIN- 600 - 2,500 CHUCK CAPACITY mm 13 PRICED FOR €340,00 Euros Ex-Factory, ItalyRefining EquipmentPrecious Metal Assay Laboratorynew779430Pawtucket, RIhttps://www.goldmachinery.com/listings/6151770-new-goldpro-fioa-column-drilling-press-type-ki-for-assay-sample-detaching5350 Watt210x470x580h mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3823df27de38903c57242238b2a7930/original-779430-Drilling-Press2-e1503497279842.jpg2024-09-25 15:38:15 UTC6151771Technology Evaluating the purity of Gold and other metals by measuring the specific gravity of the sample, and distinguish the real precious metal from the fake material. Ease Easy to use & operate. Hassle free measuring through inbuilt software for measuring. • It gives purity measurement between 9 to 24 karat with increment of 1 Karat. It also gives you result in % at the same time. • User can select either copper or silver individually as mix material in GOLD for purity measurement. PLATINIUM : • It gives purity measurement between 600 to 1000 pt with increment of 50pt. It also gives you result in % at the same time. • User can select either palladium or Ruthenium or Cobalt individually as mix material in PLATINUM for purity measurement. Model 3102 GT Capacity 3100 grams Purity Karat: Gold 9-24 Karat with increment of 1 Karat Platinum 600-1000 pt with increment of 50pt Available Ex-Factory, NJ USA Model 2102 GT... $1,999.00 USDRefining EquipmentPrecious Metal Assay Laboratoryused3102 GTPawtucket, RIhttps://www.goldmachinery.com/listings/6151771-used-goldpro-karat-gold-tester-analyzer-gt-seriesGOLD0.01 gram10 grams160 x 140 mm160 x 140 mmBright LED342 x 212 x 230 mmAC 100v - 240v, 50-60Hz5.5 kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3387f84ccd6e7a9e0e91e802dedd8bdc/original-Gold-Tester-Density-Karat-Analyzer1-e1472214145731.jpg2024-09-25 15:38:16 UTC6151772On request we supply cast iron residue cups of all sizes The indicated sizes represent the inside dimensions These weights are calculated to take into consideration like casting plant fold with specific weight 17,5 kg/dm Note, packing and shipping additionalRefining EquipmentMelting Furnacesused5101-T10Pawtucket, RIhttps://www.goldmachinery.com/listings/6151772-used-goldpro-cast-iron-ingot-mold-residue-cups€ 34€ 40€ 58€ 70€ 105€ 132Ex-Factory, Italy€ 28https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/528d8d8a6307f85a034dbefe70bec5e6/original-catalogo-e1476800328738.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d5b8b0b7d0fc53e97712e1eb05405cd/original-bothpics1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/082f77f53ccc9ff88c57c5a4f45b9af8/original-bothpics2.png2024-09-25 15:38:13 UTC6151773Catalog # 36210-04 S/n 238383 Voltage 115 / 1 ph / 60 Hz 12 Amp Dimensions (approx.): 48"W x 19"D x 18"H (inside) 54"W x 32"D x 55"H (outside) Product Description The Labconco 36210-04 Purifier is a class II, Type B2 Total Exhaust Biological Safety Cabinet is designed to protect you, your product and your laboratory environment from biohazardous aerosols. This unit comes with the UV lamp & fixture, 8 inch sash opening. REQUIRES AUXILLIARY BLOWER TO EXHAUST TO THE OUTSIDE (not included). Stand pictured is included.Refining EquipmentPrecious Metal Assay Laboratoryused2001-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151773-used-2001-700-labconco-chemical-lab-fume-safety-exhausthood-purifier-class-11https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/692b4c99696df92603e7395e5b519002/original-labconco-011-e1428332792718.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a50d36ab12f75f8935346e50d4f31a9/original-labconco-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc789a50c9d7734c12eb632bae609013/original-labconco-0111-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2927babe714e355bb90576854bd9a7b7/original-labconco-0011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fccac05d2c301e3e5a2742d1afe213a/original-labconco-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/713166682a45f166c64333c5ef661bc7/original-labconco-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/328c61970c7d70edb4d60bc09744b41b/original-labconco-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c154557c0699f2bbd14c61314420783/original-labconco-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7038f25c381d2db0dafd4de7c38b82ec/original-labconco-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d6c8283056bbde5e098d8256659613b/original-labconco-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5589e963c929c7f7ed9ee3389ee42690/original-labconco-009-1024x768.jpg2024-09-25 15:38:21 UTC6151774COOLING CAPACITY AT 25°C 90,5 Kw Equipped With: Ex-Factory, ItalyRefining EquipmentWater Chillersusedfioa-90,5Pawtucket, RIhttps://www.goldmachinery.com/listings/6151774-used-special-water-cooling-chiller-type-fioa-90-5-kwR407CWATER.300 Lt260 Lt/MIN15°C/20°C20,4 Kw2400x1140x1820h mm950 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/039364cf7a3de84dc670f78955923323/original-ritaglio3-e1503421606707.jpg2024-09-25 15:38:16 UTC6151775Static furnace for annealing and deoxidation of wires, plates, casting products and, in general, all the products in precious alloys with manual recovery. Refractory steel shovel for the manual loading. Heating chamber made of special refractory steel alloy. Stainless steel and refractory steel cooling chamber. Stainless steel quenching tank.Stainless steel basket for the manual discharge. Automatic regulation of temperature. Weekly and daily timer for automatic switching on / off. Timer to set the annealing time. Buzzer alarm at the end of the cycle. Dissociator ammonia (on request). Hydrogen gas and nitrogen gas mixer (on request) Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentDeoxidation Quench FurnacenewZeta_SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151775-new-goldpro-bertoncello-zeta-series-static-furances-for-annealing-deoxidationhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55bf17d466c9f41f331dee1cd0038b8c/original-zeta29-e1503583575656.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84a92e33b20d79a115160eced03e23e4/original-zeta.jpg2024-09-25 15:38:13 UTC6151776Priced for 16.200,00 Euros Ex-Factory, ItalyRefining EquipmentWater Chillersnew737931Pawtucket, RIhttps://www.goldmachinery.com/listings/6151776-new-special-water-cooling-chiller115 lts.0,61 KwR404A (FOR LOW TEMPERATURES)WATER/GLYCOL.-20° / -23°C7 Kw.660x1280x1340h mm.250 Kg APPROX.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3c9ad6b76993cda32f25e315d321a38/original-737931-e1503421338853.jpg2024-09-25 15:38:16 UTC6151777On request we supply melting flasks of all sizes The width of this melting flask can be regulated for lower measurements These weights are calculated to take into consideration like casting plant gold with specific weight 17,5 kg/dm Sizes available for PLATE Sizes available for WIRE Note: Packaging and shipping additionalRefining EquipmentMelting Furnacesused4201-4321Pawtucket, RIhttps://www.goldmachinery.com/listings/6151777-used-goldpro-cast-iron-ingot-mold-melting-flasks-for-plate-wire€ 93€ 101€ 112€ 129€ 159€ 215€ 206€ 277€360€455€559€ 102€ 109€ 155€ 114€ 125€ 173€ 136€ 171€ 188€ 159€ 185€ 206€ 165€ 179€ 218€ 201€ 225€ 282€ 242€ 287€ 336Ex-Factory, Italy€ 89https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b72684ada54291cd3e877682e780a38b/original-catalogo-e1476799712515.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7eb718cbf341a6a9dd9966fe21c2acf4/original-plate.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c34314d01bbf4612d1935a5dd14730c/original-wire.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dcd1c131289e4f8b86c6870979a7b3c/original-bothpics.png2024-09-25 15:38:14 UTC6151778The 205 AAS is the next evolution of the highly successful 210VGP. The 205 is a rugged, economical and highly sensitive instrument which is perfect for industrial, educational and QC operation. Internal microprocessor generates calibration curvewith graphical and tabular formats Dual lamp power, one for warm up High throughput “stable beam” optical system Modulated HCL power supply to cancel DC emission from flame Digital readout for absorbance, emission, direcconcentration, lamp currents and PMT voltage Autozero, integration and high gain damping features Bandpass resolution from 0.2 - 0.7 - 2.0 nm Burner safety interlock system for nitrous oxide/acetylene flame operation High sensitivity detection using quartz PMT detector Analog and digital output for chart recorders & PC data systems Compact Size and rugged design Atomic Absorption Spectrophotometer Built-in microprocessor with Software for operation Methods Library for Flame, Furnace, and Hydride High Resolution Alphanumeric/Graphics Display 3 Lamp Turret with power to each lamp In-Line Deuterium Background Corrector Variable Giant Pulse Background Corrector (self reversal) Wavelength range 185-900nm Variable Slit Band Width 2A, 7A & 20A Widerange Photomultiplier Detector (PMT) Impact Bead Nebulizer 10cm Acetylene Burner Head Ability to add Graphite Furnace and Autosamplers Available Ex-Factory, CT, USA Atomic Absorption Spectrophotometer ....... $16,245.99 USD OPTIONS: Flash Arrestor... $250.00 USD Air Filter...$175.00 USD Hollow Cathode Lamps...$945.00 USD Aqueous Standard Solution for above elements... $198.00 USD Acetylene Regulator... $279.00 USDRefining EquipmentPrecious Metal Assay Laboratoryused205AASPawtucket, RIhttps://www.goldmachinery.com/listings/6151778-used-goldpro-atomic-absorption-spectophotometerRS-232, Parallel Port, Recorderhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34b494e0e111d29e7b8bb233257ddfb1/original-tester1-e1472216183887.png2024-09-25 15:38:15 UTC6151779THIS IS A COPY OF THE ORIGINAL BOOK Lienhard & Co La Chaux-De-Fonds (Switzerland) Fabrique de Machines a Grayer Et 84 Page Manual, In French 66 Pages Handwritten Notes (In Italian) "The Holy Grail" of Guilloche Engine Turning Dedicated to the art of brocadingToolroom & General MachineryBrocading Machinesused2810-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151779-used-2810-385-lienhard-co-la-chaux-de-fonds-switzerland-guilloche-engine-turning-brocading-the-holy-grail-book-84-pages-handwritten-notes-copyObtained from Lindsay & Co, NYChttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5bcc4e27b9b9901d30c398f4a2f2828/original-1-2-e1565890081452.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42c3e34293a91e9204c304cfa3623374/original-s-l1600-7-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4698ac344efe7da8e28642c55bc4358/original-s-l1600-8-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8b2b88e69991fea8ad7c7214c402d24/original-s-l1600-6-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f373cc95eb7d1d499f2033ade9fa2e5/original-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acda2a7258677c83c426cd9f6a5a9978/original-s-l1600-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c45b180ab15c953714f91e9b316d9411/original-s-l1600-2-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff4ba28c6a4353a99a34a5e8488a4d61/original-s-l1600-3-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43c87adfdc6dd6632934440818d1168b/original-s-l1600-4-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f0ea9637e126bef9d87cb1e499ba35e/original-s-l1600-5-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe748053aca4d884175f957c69c5fb71/original-s-l1600-6-1-1024x768.jpg2024-09-25 15:38:24 UTC6151780On request we supply melting flasks of all sizes The width of this melting flask can be regulated for lower measurements These weights are calculated to take into consideration like casting plant gold with specific weight 17,5 kg/dm Packing and shipping AdditionalRefining EquipmentMelting Furnacesused5201-5205Pawtucket, RIhttps://www.goldmachinery.com/listings/6151780-used-goldpro-cast-iron-ingot-moulds-with-milled-grooves€ 38€ 50€ 50€ 57€ 83€ 208€ 208€ 336€ 79Ex-Factory, Italy€ 28https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef968d92c6e9ee719e694c70c25c196c/original-catalogo1-e1476800648120.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/199bcdedbf153e20f2bb3e202f2e0aa8/original-bothpics11.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d0b05524813719beb2be6fd25e0f4a4/original-bothpics21.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acbbcc7a11eb904cd589f5407e16548b/original-bothpics3.png2024-09-25 15:38:13 UTC6151781Scroll Down To See Video! Refractory steel basket for manual loading. Heating chamber in super refractory steel alloy. Separation door pneumatic control between the heating zone and the cooling zone. Cooling chamber made of refractory steel and stainless steel for possible slow cooling in deoxidizing atmosphere. Stainless steel quenching tank.Stainless steel support with manual pneumatic control for the movement of the basket in the post - heating stages. SHS controlled heating system (soft heating system). User interface colour touch screen, user friendly for the control and programming of all working parameters. Weekly - daily programmer for turning on and off automatically the furnace.End of cycle alert with sound booster. Dissociator ammonia (on request). Hydrogen gas and nitrogen gas mixer (on request). Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentDeoxidation Quench FurnacenewKapa_SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151781-new-goldpro-bertoncello-kapa-series-static-furances-for-annealing-deoxidationhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a73b9f9ee5731caf83bb2666f078499/original-kappa-e1503584003114.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84b465a08323fd3e6848067c54803483/original-kappaspecs.jpg2024-09-25 15:38:13 UTC6151782Scroll Down To See Video! Thanks to our 50-year experience manufacturing furnaces, to our patents and our cooperation with important companies from different industrial applications, we manufacture innovative electric conveyor belt furnaces with belt range width from 45 mm to 400 mm, suitable for small, medium and large scale productions, with up-to-date technological solutions, PLC control (some models only) and with incomparable efficiency in terms of quality and cost. Furnace for small and/or special productions Strong braze-soldering High quality standard Consistent results Simple starting procedure Low power and gas consumption Active and passive safety Ergonomic deisgn The model COMPACT-PLUS with two working lines has the possibility of treating in the same time different products with independent temperature and speed. Models & Specifications: Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks PRICED ON REQUEST PLEASE CONTACT USRefining EquipmentBelt FurnacesnewCompact-SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151782-new-goldpro-bertoncello-compact-series-belt-brazing-furnacehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05357740080d04ec3f86b2c3970fba54/original-COMPACT-e1503500261541.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4ae3e7b3d61f78ea73263fcc4fd69aa/original-COMPACT_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ce1f16cd3738f8f58af76650bd3db69/original-models_compact1.jpg2024-09-25 15:38:13 UTC6151783Scroll Down To See Video! Thanks to our 50-year experience manufacturing furnaces, to our patents and our cooperation with important companies from different industrial applications, we manufacture innovative electric conveyor belt furnaces with belt range width from 45 mm to 400 mm, suitable for small, medium and large scale productions, with up-to-date technological solutions, PLC control (some models only) and with incomparable efficiency in terms of quality and cost. Furnace for medium productions High quality standard Consistent results Simple starting procedure Low power and gas consumption Active and passive safety Ergonomic deisgn Use of the innovative technology GB-THERM® for long lasting heating chambers and thermic compensation for a better quality and higher production. The model SENIOR-PLUS with two or three working lines has the possibility of treating in the same time different products with independent temperature and speed. Models & Specifications: Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks PRICED ON REQUEST PLEASE CONTACT USRefining EquipmentBelt FurnacesnewSenior-SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151783-new-goldpro-bertoncello-senior-series-belt-brazing-furnacehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0984de98e3a106733481ce02fc8c9fc3/original-Senior-e1503500793688.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1e0f1022dc13b246ffed3a4c9524105/original-Senior_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91de6b466f6c73def27ee4f1ebb85cc9/original-specs_senior.jpg2024-09-25 15:38:13 UTC61517842026GB BertoncelloTechnoFurnaces for quench annealing and heat treatments with deoxidation and pneumatic recovery of the material. Highlights: - Refractory steel basket for the manual loading - Heating chamber made of special refractory steel alloy - Separating door between heating and cooling zones with pneumatic control for different cooling - Cooling chamber made of refractory steel and stainless steel - Stainless steel cooling tank - Pneumatic stainless steel basket for unloading - Automatic regulation of temperature - Weekly and daily timer for automatic switching on/off - Setting of the working parameters by PLC and touch screen video - Buzzer alarm at the end of the cycle - The furnace can be required with ammonia dissociator or, alternatively, with hydrogen and nitrogen gas mixer - Homogeneous annealing all over the length of the useful chamber - High deoxidizing standard, which makes the furnace useful for the finished products, tooRefining EquipmentDeoxidation Quench FurnacenewTechno_SeriesEx-Factoryhttps://www.goldmachinery.com/listings/6151784-bertoncello-techno-series-atmosphere-free-furnaces-for-quench-annealinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd589b3b369b48c45d8586cb0856c3f6/original-Techno-Syntesi-T1-60-e1503584502563.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7ff4b24a3ed488783390857cfa24b7/original-technospecs.jpg2025-12-03 16:33:03 UTC6151785Manufacturer Gardner Denver Model ASDRMC ADAAGA 5HP 3ph, 200-230/460v Serial No. w4c-035 Year 1994 Motor 5 HP; Rated Discharge Pressure 175 PSIG 80 Gal Tank Mounted, Horizontal Configuration Two-Stage, Splash Lubricated Compressor Pump Automatic Start/Stop Operation The Gardner Denver compressor is engineered to deliver industrial-rated dependabilityToolroom & General MachineryCompressorsused5915-540Pawtucket, RIhttps://www.goldmachinery.com/listings/6151785-used-5915-540-gardner-denver-air-compressor-two-stage-compressor-pump-5hp-80-gal-horizontal-tankhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00de1d12d6fa2679d1babcbec77b55de/original-IMG_8575-e1695734803606.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/849df12e08669cbbd325bec214722c6c/original-IMG_8580-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93ccf20ba8f6903365013fe11b982d0f/original-IMG_8581-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2d179e0e00f5b7d228cf9b389647f47/original-IMG_8582-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db5d251124391a130b9fd27978b049ca/original-IMG_8574-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37cf5f7d6547b08c7febc413ff62df43/original-IMG_8575-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2594419cc6da73eaa4af11d2ab0c99a7/original-IMG_8576-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b02a0778c974e1f5817db68a4e5916fe/original-IMG_8577-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c009cb2a07487c76296ec2bada2d16f5/original-IMG_8578-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e569c66c0596c62b3a4c33d8d2721ea/original-IMG_8579-768x1024.jpg2024-09-25 15:38:29 UTC6151786Industrial electric belt furnaces for the free sintering of powders for the production of beads for diamond wires and sectors for diamond tools and for braze-soldering ADVANTAGES electric control panel incorporated in the furnace. excellent energy performance with up to - 50% electricity consumption. constant temperature all along the muffle. muffle made of refractory steel alloy for high working temperature. heating and cooling with a number of zones in accordance to the productivity. various possibilities in the use of the deoxidizing gas (mixer for H2+ N2, dissociators for ammonia gas NH3, gas generators, gas bottles, etc.) up to - 40% of deoxidizing gas consumption. “working-environment friendly” chimneys to burn the gas repeatable working cycles. high speed of sintering and brazing. compliance with CE regulations for industrial furnaces. Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks Starting At... € POR Packing & Fumigated Crate.... € PORRefining EquipmentBelt FurnacesnewGBF SinteringPawtucket, RIhttps://www.goldmachinery.com/listings/6151786-new-goldpro-bertoncello-gbf-sintering-and-braze-soldering-belt-furnaceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a36330ce477b1b3db1550d8513258f8e/original-gbf-e1571230208970.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e66d0d4ff61967a9b334d3efadd7cfe5/original-gbf2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/049553f6d31e5b63ea7ebfb290d33dd5/original-gbf_accessories.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc4d54d3c6cf8f5a447e2616142ab5dc/original-gbf_specs.jpg2024-09-25 15:38:13 UTC6151787Scroll Down To See Video! Fast induction melting with PMS (pulse mixing system). Controlled heating system SHS (soft heating system). Independent vacuum and pressure selection in the different chambers. Use in automatic / manual mode. Close distance between crucible and cylinder. Interface colour touch screen type user friendly. 100 storable programs. Printing system parameters at end of cycle. Continuous diagnostics of alarms and security sensors. Continuous control of vacuum/pressure in the different chambers. Video live feed inside the melting chamber (on request). Remote parameters viewing (on request) This machine has been designed for precision casting by lost wax method. The machine is characterized by an induction heating with the PMS (Pulse Mixing System) already present in our other melting machines, SHS (Soft Heating System) and an advanced power management software system to avoid overheating and related declines. A touch screen with user-friendly software where you will control and edit all the necessary parameters. The control program and controls of the machine were developed entirely in our headquarter, taking into consideration all the possible requirements of the end customer. The operator can decide whether to operate the machine in automatic or in manual cycle with which he will have the characterizing parameters on which to intervene. This casting machine is designed using components of high standard, with long testing time and always keeping safety as the priority. Constant checks are made by the PLC through advanced security systems. History and usage data of all parts subject to maintenance or replacement are stored, in order to have a continuous feedback and to remind the user when checking or changing these components. In addition, our assistance and advanced spare management system will reduce to the minimum the halt of furnace. Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentCastingnewOmega-SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6151787-new-goldpro-bertoncello-omega-series-vacuum-casting-machines-3kg-5kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7b9ee1d225aee96a6b2aa66bdda5eef/original-omega30-e1503580914379.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7e76f8a3afd1a8084ae59ae0450b208/original-alpha.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/112696ff378491082445e38f6601d270/original-omega.jpg2024-09-25 15:38:13 UTC6151788230V/1PH/60HZ SERIAL # 97-4635H Equipped With: DEW POINT SMART CYCLE DUAL MODE DIGITAL/ANALOG CONTROLToolroom & General MachineryCompressorsused2963-540Pawtucket, RIhttps://www.goldmachinery.com/listings/6151788-used-2963-540-airtek-refrigerated-air-dryer-for-air-compressor-model-sc-250250 S.C.F.M.200100 ° F50" X 28" X 56" H (APPROX)350 LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eef5c087e2429aa6666f1309b54d263a/original-IMG_8350-e1585237627871.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/739b0410de89277b115ad9f9b435a60b/original-IMG_8352-e1585237761872-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33d053c7de84b323fc06062afb4b1ce2/original-IMG_8348-e1585237747214-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa5cb196ae538b5a3a564f257a51b0ce/original-IMG_8349-e1585237732141-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31154651d89b94fa2ccd23b39f411720/original-IMG_8350-e1585237720330-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f65c47b24f19709986c726efc0f673f0/original-IMG_8351-e1585237707886-768x1024.jpg2024-09-25 15:38:27 UTC6151789Scroll Down To See Video! Silent working High-performing medium frequency induction generators Stainless steel frame Perfect homogeneity of the alloys Quick melting Easy control of the working parameters by PLC and touch screen video, temperature control by thermocouple Monitor display for self-diagnosing and possible alarms with buzzer Possibility to save the working recipes and parameters Programmed maintenance with display warning Crucible with ceramic casing Tongs to handle the extractable crucible Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentMelting FurnacesnewBeta_Series 10-12HTPawtucket, RIhttps://www.goldmachinery.com/listings/6151789-new-goldpro-bertoncello-beta-series-10-12ht-medium-frequency-induction-furnaces-6-4kg-to-14kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87f4d3f237b7f3b4085c5e64738f44b5/original-BETA-12HT-e1503585199266.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c3e8981b789f84ba7ea01b6f7409d50/original-specs.jpg2024-09-25 15:38:13 UTC6151790Arrow Pneumatics INC S/N- LE390 115 Volt /1 / 60 1/6 hp 10 SCFM Fully automatic to provide the most efficient operation. Panel mounted gauges provide accurate monitoring of tower pressures. Reliable pneumatic valve operation is achieved with an electrically activated spool valve and shuttle valve. All valves are non lubricated to provide maximum dependability and maintenance free operation. Solid-state controls provide reliable sequencing of dryer functions. Power-On lighted switch to show dryer is energized and functioning. Link to MFG: http://www.arrowpneumaticdryers.com/arrow/refrigerateddryers.htmlToolroom & General MachineryCompressorsused3395-540Pawtucket, RIhttps://www.goldmachinery.com/listings/6151790-used-3395-540-arrow-pneumatics-air-dryer-model-a10-10-scfmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb1d92d786733e91b8a827c7bb364b5d/original-cci-mass-006-e1495800631598.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c17137764431f9d3e056b75b0345c535/original-cci-mass-0061-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c9efc781e5c4ce8e2d83acbd531c2f7/original-IMG_1971-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72ac2e3b1a9078741b9d2d77810c65e8/original-w-034.jpg2024-09-25 15:38:26 UTC6151791Scroll Down To See Video! Silent working High-performing medium frequency induction generators Stainless steel frame Perfect homogeneity of the alloys Quick melting Easy control of the working parameters by PLC and touch screen video, temperature control by thermocouple Monitor display for self-diagnosing and possible alarms with buzzer Possibility to save the working recipes and parameters Programmed maintenance with display warning Crucible with ceramic casing Tongs to handle the extractable crucible Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentMelting FurnacesnewBeta_Series 5, 10, 12Pawtucket, RIhttps://www.goldmachinery.com/listings/6151791-new-goldpro-bertoncello-beta-series-5-10-12-medium-frequency-induction-furnaces-3-2kg-to-14kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6459fa4eb4a4731055eb1d12269b053/original-BETA-5-e1503585633358.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2d46507467b06dd34d1db10592bdce0/original-beta.jpg2024-09-25 15:38:13 UTC6151792Scroll Down To See Video! Silent working High-performing medium frequency induction generators Stainless steel frame Perfect homogeneity of the alloys Quick melting Easy control of the working parameters by PLC and touch screen video, temperature control by thermocouple Monitor display for self-diagnosing and possible alarms with buzzer Possibility to save the working recipes and parameters Programmed maintenance with display warning Crucible with ceramic casing Tongs to handle the extractable crucible Models & Specifications: Available Ex-Factory, Italy Pricing Upon Request, Please InquireRefining EquipmentMelting FurnacesnewBeta_Series 2, 3Pawtucket, RIhttps://www.goldmachinery.com/listings/6151792-new-goldpro-bertoncello-beta-series-2-3-medium-frequency-induction-furnaces-1-3kg-to-4kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00c023af41f7ee99b41256e026647e32/original-BETA-2-e1503585990306.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaba728bba4fe3c7c542e01d4429ade4/original-32.jpg2024-09-25 15:38:13 UTC6151793Single Sided brocading plates 15 brocading plates in bronze and brass material 35 brocading plates in Magnesium FOR USE IN ALL BROCADING MACHINES Single plate in bronze / brass material - est.weight 1.8 lbs each Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc.Toolroom & General MachineryBrocading Machinesused3529-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151793-used-3529-700-assorted-group-lot-of-50-antique-mixed-master-brocading-templates-brass-bronze-and-magnesium-material5-1/2" Diameter (50 Count)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69075ddfa0b1372573acb040f34fb76b/original-IMG_8256-e1585671738113.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77b3cee35c87786c387575cbdb24a2e2/original-IMG_8271-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c58f6c8d6da7a49f60b5a84a467def8e/original-IMG_8256-1-1024x490.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a621bc2e8641757e6dbdd17ae342bf4a/original-IMG_8259-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee5f09508f6174e239ce7e63afadf711/original-IMG_8260-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87ef22afadb67f258ad8857bf83c74ac/original-IMG_8261-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/740599298b62aa6f8312e3609f078325/original-IMG_8262-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d8e4c12fec55e38131262d35d910019/original-IMG_8263-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e01b8a3f6acf5a4186386b66ab9e77d9/original-IMG_8264-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ad84de9b7a3af12b955154850972453/original-IMG_8265-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21c34f081a9cedebfcc205cefa01aaa0/original-IMG_8266-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e019d5bf6782d93febf70770793f59b2/original-IMG_8267-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c6fa9cae654fc62445d1a9fa33e75a9/original-IMG_8268-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e2f9717b086117d02efc267a34196ec/original-IMG_8269-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52645e231d1e47965af6fc3f234efb1b/original-IMG_8270-1024x1024.jpg2024-09-25 15:38:24 UTC6151795140099.0Comes with computerised numerical control suitable to carry out various decorations, facetings, punctuations, beats, stars on beads. The machine is made up of 10 axes controlled by NC. The apparatus is complete with base, electric and electronic plant, LCD + keyboard, an automatic beads loading unit, one vertical head interchangeable with the horizontal ones, protection cover, service spanners, spare belts, CE 98/37 certification. 230V / 50Hz / 1 phase Sample Photo Machine Close Up Availability: Ex-Factory, Italy Includes Tooling and Wooden Crate Packing Check the latest exchange rateToolroom & General MachineryCNC MachinerynewPawtucket, RIhttps://www.goldmachinery.com/listings/6151795-new-ompar-c-n-c-dvp-s-m9-patented-cnc-diamond-cutting-machine-for-balls-beadsN. 1 Vertical head  for M9 € 4.800,00N. 1 Set of centres € 500,00N. 1 Beads driving slide (one for each bead size) € 255,00N. 1 Vacuum holder for DVP-S € 160,00N. 1 Needle  (according to beads hole diameter) € 15,00N. 1 Needle  guide € 50,00N. 1 150°/1,20 mm. diamond tool . € 315,00N. 1 Eccentric diamond tool (1 per each ball size) . € 420,00N. 1 Set (2 pcs.) 180° diamond tools € 625,00N. 1 Set (3 pcs.) “3CUT” diamond tools for faceting  3 sides in one cut only € 935,00N. 1 Set (2 pcs.) 5.0 mm.diamond tools for oval beads € 1.250,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9112082293f8b4896050e7ad9e7ecf5f/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1a6529eedd2634171884a40f8dbdd7a/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74c9a1b332f53179595f311439e9b976/original-2.jpg2024-09-25 15:38:28 UTC6151796Single Sided brocading plates 4 brocading plates made of Steel material 46 brocading plates in bronze and brass material FOR USE IN ALL BROCADING MACHINES Brass plate weight 1.8 lbs Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc.Toolroom & General MachineryBrocading Machinesused3444-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151796-used-3444-700-assorted-group-lot-of-50-antique-mixed-master-brocading-templates-steel-bronze-and-brass-material5-1/2" Diameter (50 Count)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/570a8ffa07ddaccc18dc906c387a67e4/original-1-13-e1584627677113.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08d813b1a7ac1a1794f5ca905466df75/original-IMG_8174-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ccd5cbbd755c6a8577ddb8fb48d1b89/original-IMG_8175-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f0be1cdb40e6098149c0f1ea828a38d/original-IMG_8176-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b873a05ad713382f9511a58675418bbb/original-1-12-1024x496.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4601f1d0d53ce4a80edc30506962d0b7/original-IMG_8164-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f584f8c1689226a20614a6c9aa3c0a99/original-IMG_8165-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b162a5393f8571f7ef453b5a88fc6689/original-IMG_8166-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80e0873f66a8cd1e8e525101a4beb207/original-IMG_8167-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8a39d19cedf528995bca776bf49d1f3/original-IMG_8168-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9050bf9411984235dd1c347fc4f0659e/original-IMG_8169-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/feea8fc04178df2de18599cc07bfdf00/original-IMG_8170-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e5dd817cc5d3ed8478dee8f35cad277/original-IMG_8171-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f8c89bd4d469a9c2477134057963f9a/original-IMG_8172-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/187840b703a0b27058d2e113f99c8539/original-IMG_8173-1024x768.jpg2024-09-25 15:38:26 UTC6151797Scroll Down To See Video! Ball Chain and Mixed Ball Chain THK Horizontal Platform Precision Manual Lift Platform Precision Manual X Axies Platform Recycling Box 10” Touch Screen PLC Control Automatic Vertical lifting KOHZU platform with VEXTA ASM46AA Step motor control: $POR Plus crating for international shipping & all US Duties... TBD Training- Included Note: Travel related expenses at buyer's expense.Toolroom & General MachineryCNC MachinerynewGoldPro CNC Moon CutPawtucket, RIhttps://www.goldmachinery.com/listings/6151797-new-goldpro-cnc-ball-chain-moon-cut-machine-20201.50mm6.50mm24,000 rpm ( Air Cooling )form 1.50 ~ 6.50mm5mm220V 50/60Hz7.0Kg/cm2$39,900.00 USD$POR$POR$POR$POR90 Days from order/Deposit.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e3f2cc3293072d2f939941d7ef884d8/original-IMG_20191118_165233-e1574257913808.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0927aceac61fd5eb7dec05e09d9b28e/original-CNC-Ball-Chain-Moon-Cut-Machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6873054bbcddea2aef10341ba901f44f/original-IMG_20191118_105419-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1594b432ade01920d2b3aa23fe92be3/original-IMG_20191118_121551-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8118b80b3069972229e8161456f3bc44/original-IMG_20191118_165233-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b061287355641a0442f055e06dbed045/original-IMG_20191118_165241-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6990683269795838b2af5cae56723e1c/original-IMG_20191118_165258-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ad256df65042b96eac4db057f9dc4d4/original-IMG_20191118_165320-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4affe0d188c2292ede2be4a992b5784a/original-IMG_20191118_165326-1024x768.jpg2024-09-25 15:38:28 UTC6151798Single Sided brocading plates 50 brocading plates in bronze and brass material FOR USE IN ALL BROCADING MACHINES Single plate in bronze and brass material - est.weight 1.8 lbs each Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc.Toolroom & General MachineryBrocading Machinesused3507-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151798-used-3507-700-assorted-group-lot-of-50-antique-mixed-master-brocading-templates-bronze-and-brass-material5-1/2" Diameter (50 Count)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e514818616eadb6dbb7297787db376f1/original-3507-e1585671502156.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c888cb953a2355ffc42f842178d4d9d/original-IMG_8231-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/987b3a175942f385be3fb81788c447a6/original-IMG_8217-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8942a0850b3f87a3103677c43f2b9692/original-IMG_8218-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71078d361d730f468e5707a98af7f645/original-IMG_8219-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90f726452094ff5b490c8e3c15eb670e/original-IMG_8220-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e5110af0c930da161e280ae4c909991/original-IMG_8223-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96e341248180836adef72d99b56295f1/original-IMG_8224-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c038e50b618d9e8750ad71547d0e38bd/original-IMG_8225-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e122cd5261a4f977ba1e5810a2b90d35/original-IMG_8226-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ace990b390072cf27eac304e11b13b79/original-IMG_8227-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bcfa27cd72f211816db02738078c8a7/original-IMG_8228-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bce4d45457489ad1095d738916374b51/original-IMG_8229-1024x1024.jpg2024-09-25 15:38:25 UTC6151799Single Sided brocading plates Material - Made of Magnesium Metal 50 brocading plates FOR USE IN ALL BROCADING MACHINES Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc.Toolroom & General MachineryBrocading Machinesused3445-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151799-used-3445-700-assorted-group-lot-of-50-antique-mixed-master-brocading-templates-magnesium-metal-material5-1/2" Diameter (50 Count)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1a5e194e3fa581e24ee70fcf3710a14/original-1-14-e1584628489899.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3d2e3bb843125757fa2cc8e4a3c693c/original-IMG_8208-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/245d8f3d540b75415a62c970eedb1fe6/original-1-15-509x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30539b69553581d9146ceb648f8939ce/original-IMG_8198-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3e9ba4a46baf40550eb550243e09471/original-IMG_8199-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab7b9d60774a65aeba7989a896d8be80/original-IMG_8200-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ee4cb43e15c0a47319f97ac38003a12/original-IMG_8201-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82246d332105ad9b491b07e1fdc59afb/original-IMG_8202-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4879414e16c8a25a0cc70f065b5e8b6/original-IMG_8203-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e81b830a19d958068db42ec73edd213/original-IMG_8204-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4cdfd72bb06a2d2ab745d19662b6451/original-IMG_8205-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2f45273ec21cd2f91a40f9ca838015a/original-IMG_8206-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c11251143068b0f8a91f61b88a6b4426/original-IMG_8207-1024x768.jpg2024-09-25 15:38:24 UTC6151800Diamond cutting machine Mod. CYBER 1 C.N.C. with 2 (two) in line heads and 11 controlled axes to carry out decorations and diamond milling on flat and convex rings and bangles, in automatic mode. The machine is made up with a strong stabilized structure, one horizontal head with 6-stations automatic tool-change, one vertical head made up with a 2.2KW electro-spindle with max. speed 30.000 rpm and automatic tool-change at rapid clutch with Cone ISO-20 served by a programmable 20 station tool-change magazine. The piece-holder dividing unit articulates on 5 axes. All axes are driven by brushless motors and controlled by SIEMENS-Sinumeric 840 D-SL CNC. It is complete with electric and electronic plant, pre-arranged to be equipped with CAD-CAM programme, control pannel, service spanners and spare belts, CE 2006/42 certification as per standards in force. Technical Data: Gross weight: Kg. 2280 Net weight: Kg. 2970 Videos: Elements of the machine- Download Workings and use of the machine- Download Sample of working on 15mm bangle- Download Sample of working on 25mm bangle- Download EQUIPMENT: 1 Steel pincer complete with tie-rod for rings 1 Set of reductions for outside rings (22pcs.) 1 Large ornament cutter for Cyber1 1 15 Cone ISO-20 with pincer 6mm. 1 Reduction for horizontal head 1 6-tools cutter for Cyber-1 1 Centering jig/6-diamond tools holder c/w optical layer 1 Visual CAD-CAM License 1 130/3,0mm. Diamond Tool 1 150/3,0mm. Diamond Tool 1 R=2/2,0mm. Donvex Diamond Tool 1 180/4,0mm. Diamond Tool 1 4,0mm P=0,20 satin finish widia tool 1 150/3,0mm. Widia Tool 1 Widia cutter 02 1 0 20 130/3,0 widia tool 1 Multicrystal PCD point 40 R=o,20 1 60 R=0,20 Diamond Point Availability: Ex-Factory, Italy Listed price subject to manufacturers price increases without notice.Toolroom & General MachineryCNC Machineryusedcyber1Pawtucket, RIhttps://www.goldmachinery.com/listings/6151800-used-ompar-cyber-1-c-n-c-diamond-cutting-machine-for-wedding-rings-and-banglesV.400 50/60Hz. three-phaseCm. 185x 165 x 228(H)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd9ee8111703c8f899fa4acdcff03e43/original-CYBERsito.jpg2025-11-12 21:14:28 UTC6151801220V/3PH/60HZ Equipped With: 6 - ring positions 6 - cutting tool positions Variable speed control Background patterning 1 - cylindrical copy pattern Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. Brocading machines listed on eBay: http://stores.ebay.com/Gold-International-Machinery/_i.html?_nkw=brocading+machine&submit=Search&_sid=15895238 See our available brocading plates & rolls in stock:Toolroom & General MachineryBrocading Machinesused7854-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151801-used-7854-385-r-gudel-type-30-6-position-semi-automatic-ring-band-brocading-copy-engraving-machine197366 C50 degrees right and left of center36" x 40" x 48" high+/- 1000 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2084f74994aadc81e39ad63a8dbdf009/original-451-e1503407081670.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39f6ac76a17033f7831d674fec3cccca/original-460-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3676655801dd593019224dbb46fb9725/original-451-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/932cb203af0306d69596b3f3791f679a/original-452-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e277ae84fc79f97167f465da54440366/original-454-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b64483599a08ff6aa2162391f2b4d202/original-456-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4af0aa86e5a8f5c438834c07eb486ce2/original-457-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/966a123596aae6d605ae6ddabe46c399/original-458-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97f03b297bebd6beaa9b239b91bca473/original-459-768x1024.jpg2024-09-25 15:38:25 UTC6151802115V/1PH/60HZ (High speed motor 3600 RPM motor) Equipped With: 1/4" drill chuck with keyToolroom & General MachineryDrill Pressesused5296-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151802-used-5296-410-langelier-41-high-speed-sensitive-drilling-machine-watchmakers-precision-drill-press1/4" steel1/4 HP6"6"10"7" x 6"7" x 5"4"2-1/2"8000-4500-2600-150020" x 10" x 24" high120 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2ae54ace364396e71b1fda829c57227/original-IMG_0069-e1697807099540.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7153dc340716de74482bf150c061047/original-IMG_0074-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99c103f08c276c5536cfc91123adfde9/original-IMG_0069-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4ef003157cfae822b5d1a58c5905573/original-IMG_0070-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/890d5353606d1e502c62657b417b54fe/original-IMG_0071-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e21879d50e62a00dc8c72adfa70ebdab/original-IMG_0072-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57718daba1e268ea544d458e26edfe62/original-IMG_0073-768x1024.jpg2024-09-25 15:38:30 UTC6151803VOLTAGE 110 1PH 50/60 CYCLE Type 15" Quill Diameter 2 12 speed max speed 3100 TABLE WORKING SUFFICE 10 BY 10 COLUMN DIAMETER 3" BASE SIZE 22 3/4" BY 17 3/4" SPINDLE TO BASE 43 1/2" 1/2 HP MOTOR Equipped With: HEAVY DUTY DRILL CHUCK Universal vise and tool co machine vise 5"Toolroom & General MachineryDrill Pressesused3432-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151803-used-3432-410-wilton-15-variable-speed-pedestal-floor-model-drill-press-with-5-work-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fd2560632897fb7808f32409f1dafe3/original-IMG_0287-e1698756860759.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e09a831edbfcffbf829c6164d2f1d679/original-IMG_0289-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27b0a0a41a3896ed1054caeb8d9c4dc2/original-IMG_0290-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/678578121a5541a408f7aabe31725d9e/original-IMG_0291-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/687b9691a9a8659f9e702b59597e56f7/original-IMG_0293-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59b2fd9d6940ec3a3860391d9950dd3a/original-IMG_0287-1-768x1024.jpg2024-09-25 15:38:29 UTC6151804Equipped with computerized numerical control suitable to carry out various decorations, facetings, punctuations, beats & stars on ball-chain, mixed cylinder & oval ball chain. The machine is made up of nine axes controlled by NC. Complete with base, electric & electronic plant, LCD & keyboard, two vertical heads interchangeable with the horizontal ones, protection cover, service spanners, spare belts. CE 98/37 certification. 230V / 50 / 1 phase Availability: Ex-Factory, Italy Price: Contact Us For Pricing Check the latest exchange rateToolroom & General MachineryCNC MachinerynewPawtucket, RIhttps://www.goldmachinery.com/listings/6151804-new-ompar-c-n-c-dvp-m9-patented-cnc-diamond-cutting-machine-for-ball-chainhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/850676b0007916578944c39ef36a2f13/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0758fdc8121583bd3cb1d827ca89ef6/original-2.jpg2024-09-25 15:38:27 UTC6151805220V/3PH/60HZ Equipped With: 6 - ring positions 6 - cutting tool positions Variable speed control Background patterning 1 - cylindrical copy pattern Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. Brocading machines listed on eBay: http://stores.ebay.com/Gold-International-Machinery/_i.html?_nkw=brocading+machine&submit=Search&_sid=15895238 See our available brocading plates & rolls in stock:Toolroom & General MachineryBrocading Machinesused7855-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151805-used-7855-385-r-gudel-type-30-6-position-semi-automatic-ring-band-brocading-copy-engraving-machine19786650 degrees right and left of center36" x 40" x 48" high+/- 1000 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89f9cf545898c1a2ecec18f81865d087/original-7855.jpg2024-09-25 15:38:19 UTC6151806Scroll Down To See Video! A group of four unit Hydraulic Pump Station A group of Four 5 Mpa Original Motor Transmission 10 Inch Touch Screen PLC x 2 Original Motor x 8 Set 7 Inch CCD LED Display Sensor CE Safety protection device Cobra Chain diameter form 4mm - 20mm ( Round, Oval, Flat ) Available Ex-Factory, China Priced for... $28,900.00 USD Complete Set Mold... $1,000.00 USD Complete set Guide Chain Forming Device... $800.00 USD Packing and Crating Additional, Please InquireToolroom & General MachineryCNC MachinerynewAHS-G4Pawtucket, RIhttps://www.goldmachinery.com/listings/6151806-new-goldpro-automatic-control-cnc-hydraulic-power-stamped-popcorn-chain-machine4 – 20mm80-120Link/min.175 High X 175 Long X 65cm WidthNet 860Kgshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fe8c04201fe2353fc7b7990b4b93b28/original-12-e1496754319914.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d41290e0d1490e9c0eca3cd7617b267b/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46b1cfbd5c10cdb57cc8dd1e158e8922/original-unnamed-1-1024x574.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4ae1cafc34b364b6021d7525326a2fe/original-unnamed-2-1024x792.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/615c62410bf14d3c6096e1f8ed1405d8/original-unnamed-3-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d4af6894a17bcabd8f7855aa12342a1/original-unnamed.jpg2024-09-25 15:38:27 UTC6151807Diamond cutting machine comes complete with with computerized numerical control. Two axes are driven by DC motors and one axis by stepping motor. Features three heads: horizontal, vertical and one head for stars. Suitable for various ornaments on flat objects, medals, plates & other items carrying out parallel, continuous or alternate lines, radiant crowns, circles, crosses or stars, alternate beats or other designs. Controlled by program in continuous production. Features include a revolving dividing unit with vacuum platform & vacuum pump, video screen, keyboard, programmable floppy discs, optical layer, service spanners & spare belts. CE 98/37 certification . 220-400V / 50-60Hz / 1-3 phase Line Drawing Availability: Ex-Factory, Italy Check the latest exchange rateToolroom & General MachineryCNC MachinerynewPawtucket, RIhttps://www.goldmachinery.com/listings/6151807-new-ompar-ra961-o-v-s-patented-cnc-diamond-cutting-machine-for-flat-decorations140 x 115 x 180(h) cm530 Kg400 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6a565235d2a512f1a334340cd9b32a1/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf8996138f7dcc63797a7a07875c74a5/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9141086d65bb6922e24f0aaa1315fc07/original-3.jpg2024-09-25 15:38:27 UTC6151808MODEL RF-30 Spindle taper R-8 Head swivel 360° Working area of table 9-1/2" x 28-1/2" Equipped With: Cabinet stand Clamp Kit Work Light Cabinet Stand Milling cutter 4" Vise with swivel attachmentToolroom & General MachineryDrill Pressesused5966-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151808-used-5966-410-enco-complex-milling-drilling-machine-model-rf-30-with-cabinet-stand32mm(11/4")76mm(3")20mm(3/4")405mm (15-7/8")16"130mm (5")5"4"1HP270-2130(r.p.m.)5"16-1/2"760 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/443dedaf2b2757db61408307f883df66/original-IMG_6591-e1666279839628.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80d49280469b0420f107aaf2e5d6f6da/original-IMG_6598-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8e6533258a2c2f0dbaa91e61054b1f2/original-IMG_6599-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89e5dfbe782f2fb486ca1ea955c7fb2d/original-IMG_6600-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d63288ea66828c6e08a311a52fba4f14/original-IMG_6601-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00eceab75b50923b6a9085b28cba438f/original-IMG_6602-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc19073709fd62814fe6aa487c263b68/original-IMG_6591-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91a4a53297e2745e5c25c3d501533fe0/original-IMG_6592-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/547a08df0027a3298a757cf5b646b11c/original-IMG_6593-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2c5cb3216d8da0a704e8150bbc5a2d3/original-IMG_6594-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ed0622ee8ddb793bf26b8f07b567f09/original-IMG_6595-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/942150e9e05320ef424b6ba62cee1947/original-IMG_6596-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fac503bb91833c4ec704bd69a0d51a1/original-IMG_6597-768x1024.jpg2024-09-25 15:38:34 UTC6151809Model DP220 115/230v 5.0/2.5A 1PH. 1/3hp Wired for 115v Table size 10" by 10" Weight 230. lbs Dimensions 48 × 40 × 73 in Equipped With: Keyless chuck Less Back gard -As photographedToolroom & General MachineryDrill Pressesused5959-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151809-used-5959-410-rockwell-delta-dp220-14-floor-model-drill-presshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e77c86d1aac6522eac4f3307c6d3f18/original-IMG_6261-e1670593254315.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4340d4d94d3fbc4e452beb67b1fa8b9c/original-IMG_6285-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a3f4cdecc396b96ac24d99598f924ea/original-IMG_6261-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8da634c3ce6728113ec5587189b002b/original-IMG_6281-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfca82c77d8d0215c5ab4dcbba6adb9a/original-IMG_6282-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/698b111994da6e24ad573ca95684c4c6/original-IMG_6283-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1075cf91fc48e34f0e432b5e6f25b2b3/original-IMG_6284-768x1024.jpg2024-09-25 15:38:31 UTC6151810220 VAC 3-Phase (Standard) 440 VAC is available at extra charge 8 tool automatic tool changer CM-15 10 tool automatic tool changer CM-20 Full enclosure with door safety switch and top cover 500 IPM rapid traverse feedrate 7.5 HP, 40 taper 8,000 RPM spindle Rugged cast iron construction 4 nozzle built-in coolant ring High output LED work lamp PLC way lube pump virtually eliminates tramp oil from coolant Power failure protection All axes laser calibrated & ballbar verified Hand built precision +/- .0002” One year warranty CONTROL FEATURES - FRYER-SIEMENS 828 CNC Simple menu programming - no codes of any kind G code editor runs Fanuc or Haas G code Concurrent verify makes programming faster and easier Solid model part verification shows entire part being cut Handwheel run feature makes proving out programs safer Simple tool management - increases productivity 5 MB part program storage USB port for easy file transfers Regenerative drives save 40% on energy use Siemens High Speed all digital control system - Ultra reliable Siemens Absolute encoders - no homing required Siemens Digital motors, drives and cables Automatic part & tool probe cycles 99 work offsets and 99 tool offsets Coordinate, rotation and scaling User defined macros with 500 variables The Fryer CM Series is the perfect tool for toolroom, job shop and secondary operations. Built on a solid cast iron platform and using high precision ballscrews, spindle and ATC, the CM can hold the demanding tolerances that industry requires. Programming is accomplished with industry standard G code or Siemens advanced ‘Shop Mill’ programming. Equipped with a impressive list of standard features the CM Series is by far the best compact milling machine available today. Click for Full Technical Specifications Equipped With: 7.5 HP - 40 TAPER SPINDLE - 60 - 8,000 RPM 8 STATION CAROUSEL TYPE AUTOMATIC TOOL CHANGER OPTIONS: REMOTE ELECTRONIC HANDWHEEL Handy jog handwheel is located in a portable box. Features axis selector switch and a resolution selector for coarse or fine movement. Remote stop start is also included. Also features an innovative function which allows you to control the movement (forwards or backwards) and feedrate of running a part program (Handwheel Run). Priced for $950.00 USD 30,000 RPM 30 TAPER ELECTRIC SPINDLE (includes refrigeration unit, air purge seal, oil/air lube system, conversion of ATC to 30 taper) Priced for $29,950.00 USD Click for Full Options Priced for $43,980.oo USD Ex-Factory, USAToolroom & General MachineryCNC MachinerynewCM-15Pawtucket, RIhttps://www.goldmachinery.com/listings/6151810-new-goldpro-fryer-cm-15-cnc-machining-center-manufactured-in-the-usa15” x 10" x 15"10” x 32”https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcc8cfe5a63167a15b8d14e8fb4813f7/original-fryer.jpg2024-09-25 15:38:26 UTC6151811Cincinnati Bickford1REx-Site, RI Warehouse Equipped With: Power Elevation Box Table Coolant SystemToolroom & General MachineryDrill Pressesused1R18212861-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151811-used-2861-410-cincinnati-bickford-tool-company-radial-arm-drill-3-x-93'9"60- 1,250 RPM9"#4 MT4- 8- 14- 20 IPR10 1/2"- 36"12 3/4"- 52"84" x 36" x 95"5,000 Lbs.3https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99b90490444271886847fd7df1ee1816/original-Radial-Arm-Drill-photo5-2-e1531487813209.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/732f2fb15673fb8a6b7bde707f7705c1/original-Radial-Arm-Drill-photo5-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0807b09841aeaec0c24f3fc32f74deb6/original-Radial-Arm-Drill-photo3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eca955a9783071152eefbd063cb2b244/original-Radial-Arm-Drill-photo4-768x1024.jpg2024-09-25 15:38:30 UTC6151812Scroll Down To See Video! Floor Model Manual Operation by Hand Wheel Equipped With: Vertical Brocading Attachment with 5½" Diameter Antique Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. See our available brocading plates & rolls in stock: Also available to go with this machine, please see: #2841-385 Antique MJ Brohen Brocading Ellipse Precision 360 Chuch/Vise & Oval AttachmentToolroom & General MachineryBrocading Machinesused0927-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151812-used-0927-385-antique-mj-brohen-brocading-machine2½5½" Diam.39" x 40" x 53"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07a9ada8125ddb6b30d272d8ac9ae287/original-IMG-5850-e1527077604995.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f29dbe03ff975e4e8e8570326c6889f4/original-IMG-5861-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/343a55d187f213a510c98544b144cbeb/original-IMG-5862-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64dba55683f29c25a200085d5819420f/original-IMG-5875-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6eb360c6937805f65be9f60a9df49d91/original-IMG-5876-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed0af44c70ff5ab70fc4596456dbcf28/original-IMG-5877-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a62415208bd9f34408f822ba7625c73/original-IMG-5850-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64118965ea69fd98c87c0fd455990231/original-IMG-5851-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/311d4ca3d318ff824d0d589d5979bc06/original-IMG-5853-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05fd45e84c8cbc391c8c469357e4a18f/original-IMG-5854-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49ceda1d98fd0e6e44bf86565fc90bbb/original-IMG-5857-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e3eabb3ac493ec0b73c435b59c443c9/original-IMG-5858-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55bf0e7bd4a3f149ea400361a97be181/original-IMG-5859-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66d954f3cd9bb9c09cc4739c85299d51/original-IMG-5860-1024x768.jpg2024-09-25 15:38:27 UTC6151813220V/3PH/60HZ Equipped With: 6 - ring positions 6 - cutting tool positions Variable speed control Background patterning 1 - cylindrical copy pattern Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. Brocading machines listed on eBay: http://stores.ebay.com/Gold-International-Machinery/_i.html?_nkw=brocading+machine&submit=Search&_sid=15895238 See our available brocading plates & rolls in stock:Toolroom & General MachineryBrocading Machinesused7853-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151813-used-7853-385-r-gudel-type-30-6-position-semi-automatic-ring-band-brocading-copy-engraving-machine19736650 degrees right and left of center36" x 40" x 48" high+/- 1000 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/416a6cdc0610130d984f5a638648e580/original-7853.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0866ecf24cf54ed2f8f725010d0bce49/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/233d9a8de5e241fa3fa3d60fef29ef59/original-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e774bec6e0eb456e4514c55ac35afe26/original-034-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acf9bbcd4422947b5775102696abec6c/original-035-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93f859954d3f3ea86b6f6c2e8571220a/original-037-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c03d41cae0b85d72f96cee90c636b123/original-039-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec815726141f830fa90fbfaf1bbf9521/original-040-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ea7e01afaf7ace5ab108a4f5e2a5ab6/original-041-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52de3ca6540b71006962be9f69d95d58/original-041-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9e25e797dc14d18edb78eba09cabf7a/original-042-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca78e28f55afdf39110dfc75070e94d7/original-042-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e04640e7e9973238d988cc1edcf9bba7/original-043-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9825ac1afa095d80e901ae619af78f3c/original-044-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d3f8c0939407c1fa5e37d43f3d76a94/original-045-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/505b4e83384922a2cd46965a8547d25d/original-048-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3ba79d1b2fbaf74d75ec087c2bc18be/original-049-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfc28da0e33448194e874f0b449db716/original-053-1024x768.jpg2024-09-25 15:38:29 UTC6151814Scroll Down To See Video! 110V/ 1PH / 60HZ Capacity: Cast iron: 5/8", Steel: 1/2" Equipped With: Worklight Safety Shield Jacobs Drill ChuckToolroom & General MachineryDrill Pressesused5924-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151814-used-5924-410-clausing-model-1670-15-variable-speed-floor-model-drill-press15"7-1/2"4-3/4"3" o.d.2"14" x 10" , tilt type500 - 4000 RPM, variable15-1/2"(w) x 28"(d) x 72" high300 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e156e8e028708a6dc4074ab201ea2b22/original-IMG_8053-e1689944117976.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/851fde2cea61b42687efc810dd7c207f/original-IMG_8056-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e1f617f2265e2efc07f3f1cbf70a16f/original-IMG_8055-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28e42c3bd0f435821a971c6ad5ce1ae5/original-IMG_8054-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1bd70c7e8a50d536e55c0a0ba027305/original-IMG_8053-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb6e7720e83eb9ffbd6d84021760de91/original-IMG_8060-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f89bb1d007a990e0686f406e8ee5030/original-IMG_8059-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a40143000ea0e8a4eadfd3503e166c9/original-IMG_8058-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69f3311b0e05f47a24d15d672f87f673/original-IMG_8063-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b1d9d8f2036b0c49b04f129690f1fa7/original-IMG_8061-768x1024.jpg2024-09-25 15:38:32 UTC6151815230V/3PH/60 S/N E-1713 Model 4 Hz Equipped With: Foot operated shaker system SilencerToolroom & General MachineryDust Collectorsused4479-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151815-used-4479-550-i-shor-torit-type-whirlwind-model-4-3hp-cabinet-dust-collector-with-silencer875 - 1231P 7.30" - 5.00" (W.G.)4460 - 6821 FPM6" diameter3-1/2" x 9-3/16"3 HP150 square ft.2 cubic ft.28-1/2" x 28-1/2" x 48" high380 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a81b28b46a1fcf2795a6e7da417bb4e/original-IMG_2613-e1623169623514.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58665d5ac4f6fa2a0a38d46e0d426916/original-IMG_2616-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe7adefc2650d47c509f5ca5ac8e00bf/original-IMG_2617-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14e97aa313adf457c773106410bc99ef/original-IMG_2618-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/815ec606490551c8e50639b730e9f01c/original-IMG_2619-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b27c79bed018bdd3074773dd2a48b018/original-IMG_2613-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8935d8aae9825f8539642279e94f99c6/original-IMG_2614-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47b98cd1f0b8eb2c10c3378fb3644844/original-IMG_2615-768x1024.jpg2024-09-25 15:38:35 UTC6151816ADVANTAGES OF OUR MACHINES VS. COMPETITION Faro machine F1 – The base in natural marble granite guarantees the highest stability in time and reduces vibrations – High working speed – Ultra speed diamond tool. 200 mm of diamond-cut coil per minute – Ultra speed satin tool, 200 mm of satin coil per minute – Guilloche tool for engraving (“such as handmade”) – Wheel diamond tool with the automatic change of 3 tools – Possibility to set wheels from 15mm to 63mm of diameter – Highest flexibility to work on the whole surface of the metal coil ( vacuum plane) – Coil fixing system to the vacuum plane with pneumatic press for the use of uneven coils – Automatic alignment systems – Automatic mapping system of the coil for the working on coils that are not perfect or that have non flat surfaces – Dedicated CAD-CAM package software, with all the necessary automatic functions for the satin, diamond cutting, laser and engraving work For the machines with laser: – Possibility to do marking and cutting both in the combined area (inside the machine) and in the stand-alone area (outside the machine – Great usable area with single exposition, 180 x 80 mm – No loss of metal vapors or smoke thanks to the mobile cowl system and special aspirator Faro machine F35 – Base in natural marble granite – Toggle switch angle from + 125° to -125° – 360° continuous and infinite rotation – 13 tools – Automatic ring loader – Automatic probe to work on imperfect or uneven oval objects or with a imprecise shape – Laser interferometer for the diamond cutting on objects with imprecise shapes – Automatic tool change for diamond cutting – High working speed and high precision – Highly specialized package software CAD-CAM for the creation of cylindrical, bombed, ovals or specially shaped rings and bangles. Easy, quick and intuitive. 2Ddrawings and automatic 6 axes transformation. MACHINE DESCRIPTION F1isoneofthe mostefficientandflexibleCNCmilling machinesworldwide.Itcan carry out18different operations,frontandback,onflatsheets.Itshighlyrefinedmechanicsallowsaperfectalignmentofthe axesgeometryandguaranteessteadinessthanksto the granitein the basement.Theseparatetractionofthelinearaxesensuressmooth and precisemovements.Itisequippedwithasetofuniqueaccessories,such asthevectordiamondcutterforthejewelryindustryorthe pivotingblade for the eyewearindustry. F35is the all-around,native5-axis machinethat represents yearsof ongoingenhancementscarriedoutbyFAROSRLtorespondtothe needsof the jewelry manufacturingindustry.Thanks toits small footprintandbig versatility,tothe distinctivefeaturesoftheproprietaryPiGreco program and to the customizableconfiguration,F35is oneofthe mostpopular systemsinthe jewelry industryforallengraving,diamond-cutting,drilling andstonepre-settingtaskson 3Dbanglesandrings.ThestyleF35is a compactmachiningcentertoprocessweddingrings,rings andbangles, designedandmanufacturedbyusincompleteindependencetogether withawide rangeofaccessories toconfigurethe systemexactlyaccordingthe specificrequirementsofeverysingleCustomer. FARO F1 ü Automatic Tube Dragging ü Automatic Alignment ü Natural granite structure ü Look-ahead function ü Multi-function head ü FAYb Laser ü Skipper control software ü All-in-one CAD/CAM software FARO F35 ü Diamond Cutting head ü Natural granite structure ü Faro Numeric Control ü Automatic Tool Changer ü Automatic Ring Loader ü Pneumatic vice for rings and bangles ü Skipper NC control software ü Pigreco is an integrated 7 axis CAD-CAM Alltheprocessesaremanagedbyhighlyspecializedsoftware packages,developed byourownteam ofengineers,withlots ofusefulfeaturesthat, thankstotheir easeinthe useand rapidity, free the creativityof the operatorand allow the creationof uniqueobjectswith outstandingfinishesand effectsinjustafew,simple stepsleavinganywayfullcustomization freedom. Engraving,diamond cutting,drilling, stonepre–setting, grazing,satin finishing,blipping,profilingand millingareonlyafewofthemachiningprocessesthatcan beperformedwithourmachines. designed,developed andrealizedinour company,weareabletofastandproperly answerany questionaboutthe use,the maintenanceandthemachineoperation.Our equipment is foreseenwith thelatestsafetysystems, prevention andguaranteeofabsoluteprecision accordingto the mostdemandingstandards,andis availableinEuropean andNorthAmericanversions. 600kg/1.300lbs),specificallydesigned toeasilycollectallpreciousmetalschipsinside, easytobeused,can fitalsosmalllabs thanks toitsquiet operationnoise. high-qualitylinearguidesandball-screws(alsoinstainlesssteel), high– efficiencybrushless motors,HFelectrospindlesof1,2÷1,8kWpowerand50.000 or60.000RpMwithrun- out lessthan0,001 mm, automatictool changeand7-tool magazine, CNCcontrolledcoolingsystemto keep spindleanddiamond–cuttingdeviceataconstanttemperature. VERSATILE: Despite the small footprint, the F1 has a very large work area of 320 x 450 mm or 12 x 18”, and in the GOLD version features simultaneously the automatic coil dragging system with an area for precise engraving and diamond-cutting on vacuum table and another one for the final cut with automatic pneumatic vise; pneumatic vise forsingle sheet 0,1 ÷ 10 mm thick and up to 100 mm wide and 450 mm long, with removable vacuum table for pre-series and sample preparation; spindle with automatic toolchange. F35 is a native 5-axis machine with wide range of freedom (+ or – 120° tilting axis and endless rotating axis), automatic tool change with 9 or 13 positions EASY TO BE USED: The system is supplied with a specific software with lots of dedicated features to generate amazing effects and reduce the programming time in the manufacture of samples and production start-up LOW RUNNING COSTS: Power supply 220V, optimized consumption, low need of compressed air Faromachine F5 It’saflying bridge– fixbed type machine tool with structurein naturalgranite,stainlesssteeland aluminum,linear axeson rails with carriages on recirculating ball bearingsandleadscrews with recirculatingballbearings,angularaxeswithzero-backlashgear boxes. Thehigh–resolution stepperdrivesguarantee highperformancesandexcellentaccuracycombined with hugereliabilityandminimumsize. Inits standardconfiguration,the F5comeswithelectrospindleofmax25.000 RpMfordiamond-cutting with verticaltool, diamond-cuttingwheelandautomatic draggingdevice, andupondemandcan be equippedwithmechanicalprobetoacquire the reliefofsemi-finisheditemsortoconvert2Dinto 3Dtool pathsprojectedonthe surfacetobemachined. Thesystemissupplied with CAD–CAMsoftware suitespecificforjewelry with lots ofusefulfunctionsto easilyandquicklygenerate newmodelsanduniqueeffects. DIAMONDHEAD Thisrevolutionarydevice isbasedonapivoting andhi-speedrotating headwith manual changingwheel, and according to the job specifications,itturnstheF5andinto combinedmilling & diamond–cutting machines.AspecialFeatureonPigrecoCADcan driveitinasynchronizedmovementwiththe otheraxis. DATA SHEET Linear Axes Travel: X: 310 mm Max. Feed Rate XY : 7.200 mm/min Z: 6.000 mm/min Resolution: 1 μm Accuracy: ±10 μmRepeatability: ±10 μm Numeric Control: Faro FDC Processor 64 bit floating point Multi–function Remote Control Presetting automatico degli utensili Automatic Tool Preset 5 AUX CNC controlled outputs 2 CNC controlled air/water lines Click-To-See Videos of Machine in Operation: Priced Upon RequestToolroom & General MachineryCNC MachinerynewPawtucket, RIhttps://www.goldmachinery.com/listings/6151816-new-faro-gold-5-axis-cnc-milling-machine-for-rings-bangles-engraving-diamond-cutting-drilling-stone-settingSincetheMechanics,Electronics,SoftwareandFirmwarearecompletelySmallfootprint(1×1,4×1,8mt/40x55x70”),light(=Baseinnaturalgranite,Continuousinterpolationupto6axes190 mm120 mmUSBEx-Factory, Italyhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/816b1927719578fe31f4d75fe14f4dde/original-3-e1500651640410.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bebe6b842be0e0ba08d199d71f5da6a7/original-123-e1500651862126.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa3e795e7ca3b9777af2d3b87346aa2c/original-456-e1500651951604.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a216ea30ef663913414aa3ecb74e8b53/original-789.png2024-09-25 15:38:26 UTC6151817Equipped With: Handler Dust Collector in base - 3/4hp 1 PH Self-Contained W/Filter Bags Applications: Baldor Industrial Buffers are made to use with soft cloth buffing wheels and buffing compounds. Used for buffing and polishing objects to various degrees of luster.Toolroom & General MachineryDust Collectorsused3600-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151817-used-3600-550-baldor-1-hp-double-end-buffing-unit-with-handler-dust-collector-base407B1115/2306015.4/2.718003528C10".50/1.25620648" x 29" x 56" high250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9301a7fe9773682eea5351539d1415f7/original-IMG_2645-e1625059142264.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f33a8a6b434c82ac0c48585e689d49a8/original-IMG_2646-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9238faccfe06f7258e8f213a89e9ca44/original-IMG_2643-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed1e714cf8f3903348b7bd068e98a657/original-IMG_2644-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12429f01589dd1712b78656b0fba0a45/original-IMG_2645-1-768x1024.jpg2024-09-25 15:38:33 UTC6151818Standard voltage is 110Volts/60Hz Switch and box type silencer Finished in a durable, baked coating Powered by a ball bearing Suction - 600 CFM (cubic feet/minute) ( 283 m3 / min. ) through inlets Filter Area - 62 sq. ft. through 24 shakeable filter bags Removable cabinet trayToolroom & General MachineryDust Collectorsused4474-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151818-used-4474-550-handler-dust-collector-3-4-hp-multi-station-dust-collector-with-bag-type-77240 lbs. - ( 108.9 Kg )24" wide x 20" deep x 38 1/2" high ( 61 cm x 51 cm x 98 cm )https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db11c5bbc731dec65371bb2a356ad3da/original-IMG_2488-e1621604734584.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15c29e7a082a1959a77e733394b49dab/original-IMG_2490-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa58599554e897d7da8badd5415f75a6/original-IMG_2486-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22f3acc8c3bfe1e7a158fd5e2f7e1723/original-IMG_2487-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be406d08cbc1dc491c48b6dc7c2bd0d9/original-IMG_2488-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abbf29cd877bf01b562751c72b3cc75e/original-IMG_2489-768x1024.jpg2024-09-25 15:38:34 UTC6151819Jaws Drilled for PinsToolroom & General MachineryEngine and Ornamental Turning Machinesused1906-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151819-used-1906-7-centering-vise-for-engine-turning-machine7¾"2¼"2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7af1ff2c87a16ba66aa3b150a53ffd81/original-1906.jpg2024-09-25 15:38:37 UTC6151820Rotary Type Brevet 14109 Floor Model Wood Base Manual Operation by Hand Wheel Equipped With: 4 Rosettes Brocading Attachment with 5½" Diam. Model Holder 1½" Vise Left & Right Rubbers Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning Machinesused0365-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151820-used-0365-ra-lienhard-chaux-de-fonds-engine-turning-machine-circa-19047½" Diam.55" x 46" x 51"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5eba9e41cb6fd95c5a36f695bf064637/original-0365-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f81f31c9bb9357a43b8c6f87565eae71/original-0365-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f402d493a530377b96c83354a2d54c1c/original-1263-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b2705835fbe7e702c1dffae1c994d67/original-1264-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c30de8664b8ae4c3a2bf72f95e59ad3/original-1265-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bfa2f0a821c905026f660312f1ef462/original-IMG_0115-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfbf0b4c8fc7974f7e75a62a8f796c4d/original-IMG_0117-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58b6bfa0707afb56c52efd52be790dda/original-IMG_0118-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f28447eb0b7c177ff12916aea1ab5e74/original-IMG_0119-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dd73633a7dd9a1eff006f6849b43824/original-IMG_0126-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c654ae45420a749453bb2592a52a92c/original-IMG_0127-1-1024x768.jpg2024-09-25 15:38:41 UTC6151821Scroll Down To See Video! Standard Model ASL-SS: Hydraulic Pump Station 3 Mpa 10 Inch Touch Screen Hydraulic Press Gauge control PLC x 1 Mitsubishi Servo Motor 7 Inch CCD LED Display Sensor Stamp Chain diameter form 1mm - 3mm (Round, Oval, Flat, Square, Hexagon, Popcorn) Industry Model 4.0 ASL-ISS Automatic Hydraulic Power Small Stamping Chain Making Machine – with Laser Soldering SMC Pneumatic transmission Mitsubishi Servo Motor Transmission X 2 SIEMENS PLC Control with Ethernet switch 10” Inch Touch screen type industrial computer 20 L Servo Control Oil Pump Station 1.5KW 3000 rpm 0-13.8 Mpa 7 inch LED CCD Display KOGANEI DTRY-ELL01 Electrostatic eliminator CE Safety Protection Device ( including ONE complete set Tooling ) Available Options: Complete set of tooling, Mold, Prevision clawbox (parts only) and Push Rod & Sleeve (parts only).... $2,960.00 usd Mold Complete 1-3.0mm for Any Model....$2,980.00 usd Prevision Claw Box Complete.... $1,480.00 usd Acrylic Automatic lifting protective cover ( SMC )... $400.00 usd AHS-G4-1L 5 X 32 X 44cm Acrylic laser welding mirror... $120.00 usd Available Ex-Factory, China Standard Model ASL-SS... $34,900.00 USD Industry Model ASL-ISS.... $48,800.00 USD Packing and Crating Additional, Please InquireToolroom & General MachineryCNC MachinerynewASL-SSPawtucket, RIhttps://www.goldmachinery.com/listings/6151821-new-goldpro-fully-automatic-cnc-small-stamping-chain-machine-with-laser-welding1 – 3.0mm35-50 Link/min.140 High X 90 Long X 90cm WidthNet 540Kgs35 – 60 Link/min.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb77e1e27cdd355311dc5b2dd8f8ad59/original-2-e1496753521478.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7073c189be882931598eb3097915c616/original-chain1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e62e6551c55497ff36e7889d61a9a6c/original-samples_1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3be3aa10808003f80dd83057a33db14d/original-chain.png2024-09-25 15:38:26 UTC6151822VOLTAGE 115 /220 1PH 60 CYCLE HP 3/4 Equipped With: Work Table Swivels Left and Right Work Table Movement Up and Down Via Rack Gear Jacobs Drill Chuck Foot Pedal Link to ManualToolroom & General MachineryDrill Pressesused815V11765917-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151822-used-5917-410-powermatic-15-precision-floor-model-1150-industrial-drill-press11507-1/2"18" L-R x 12" F-B#2 Morse6" Manual Only475 to 4800 RPM26" L-R x 36" F-B x 72" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21572b03594594bde608bd683f39939f/original-IMG_8583-e1695733547658.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10d157d43b90e16cb2b25ce9066874a4/original-IMG_8589-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a5799c21271dd48f96d0934faf61abf/original-IMG_8583-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f60acddd9aab319d5b5e6e52c62b31e/original-IMG_8584-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dc3df8aa52000523183966c0120d515/original-IMG_8585-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a83e9ee1e9eeb25ca9da103901c0af29/original-IMG_8586-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cec64e5857ca112e25dec690bfd4c8c/original-IMG_8587-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6d7bfe6243d98c6c2f04ba3cad8487e/original-IMG_8588-768x1024.jpg2024-09-25 15:38:32 UTC6151823Travel: Left To Right: 5Toolroom & General MachineryEngine and Ornamental Turning Machinesused1897-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151823-used-1897-traversing-toolslide-for-engine-turning-machines1¾"7 7/8" Less handle, ratchet.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d9ced8ba3cd3c0dd2a605220f7377bb/original-1897.jpg2024-09-25 15:38:37 UTC6151824Ratchet Cross FeedToolroom & General MachineryEngine and Ornamental Turning Machinesused1910-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151824-used-1910-traversing-toolslide-for-engine-turning-machines4½"¾"7"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04e46bbd6511ba850f41c1f987b843f0/original-1910.jpg2024-09-25 15:38:37 UTC6151825220V / 3Phase / 60Hz Equipped With: Wire Guide CounterToolroom & General MachineryFour Slide Machinesused8329-145Pawtucket, RIhttps://www.goldmachinery.com/listings/6151825-used-8329-145-goldpro-vertical-four-slide-2-wire-forming-machine-produces-4-76-mm-o-d-ringI.D. 3.00 mm - O.D 4.76 mm0.9060" x 33" x 60" High1,000 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0235707e5acdd2ecf5cbe760c08859fa/original-IMG_1592-1-e1612883415283.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb72c26150340534f935e6e85534a5b1/original-IMG_1599-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d40053e5af906f032909108d7564c934/original-IMG_1601-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da9dcf07f3e5f305468f7522c7bcabce/original-IMG_1592-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f77820b09f8c57eec4b7b13d9b266b4/original-IMG_1592-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05401069c7cea470fe6d3a8461310488/original-IMG_1593-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/027322bc5f2ed819c58380a577fb4428/original-IMG_1594-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13fcabd342a6e7487fee5c0714ac672b/original-IMG_1595-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a9508d9a042960394b5998cf4ec9c2a/original-IMG_1596-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5a7c018b909093e750f465686dd7902/original-IMG_1598-768x1024.jpg2024-09-25 15:38:42 UTC6151826Foot treadle powered Made by Fenn, 105 Newgate Street, London Ornate cast iron frame with iron bed, treadle,flywheel and counter shaft Fenn double overhead with mahagony drum and crane Common headstock with division plate and sector plate Equipped With: Original Fenn ornamental slide rest Additional ornamental slide rest with fluting stops Eccentric chuck Brass & boxwood work-holding chucks Horizontal and vertical cutting frames Eccentric cutting frame Drill spindle Box of drills Box of eccentric & OT cutter Wood tool box as shown in photos does not go with this machine and is being sold as a separate item Fenn Three-jaw Chuck, Protractor, and Centering Tool, all marked FENN LONDON, chuck with knurled-grip screw housing, protractor scale marked 0 to 90 degrees, and flared centering tool with adjustable center point. What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/ Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning Machinesused7913-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151826-used-7913-385-antique-fenn-of-london-ornamental-turning-lathe-with-accessories52" x 40" x 55"H   1700 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12d28efabc903b737ddb8e1936795f99/original-7913.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c23f87a17d33eb2cf4a17bfff90afe61/original-7913-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61129623334094762fcc0e2c4028c477/original-7913-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80f7943d2efed27c02725c391371f4ae/original-7913-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2dd0d32ac2060e2d799fe4b79393ae7/original-7913-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4da29212dbad2909718cc996c7ac6b9c/original-7913-4.jpg2024-09-25 15:38:35 UTC6151827110 volts 1ph 50/60 cycle Approx. Wire size .098 Approx. eyelet loop size 1.054 Overall size 54” L/R - 26” F/B - 51”h Estimated weight 375-LBS Perfectly Suited for small precision part making Equipped With: TAK 4 Position wire roll feed Rapid air A2 air feed Pneumatic pressure regulator Safety cover & parts counterToolroom & General MachineryFour Slide Machinesused3376-145Pawtucket, RIhttps://www.goldmachinery.com/listings/6151827-used-3376-145-four-slide-4-slide-wire-forming-machine-for-jewelry-earring-loop-eyelet-wire-size-098https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f60c7b0557c8effec0971828184dd821/original-IMG_8631-e1591620496950.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc2d235b435fadd5445948b38c0cc6fd/original-IMG_8632-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65e18890d7901ad7e8c51e736ded5110/original-IMG_8634-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b67ba99012dde92fa8131994b199decb/original-IMG_8637-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02c455726cd0fe0f8e7a60783079facc/original-IMG_8643-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/317ec945fdeb70c443160fb77d483234/original-IMG_8644-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/172ea6ffdb28d7cd46b745c95514623f/original-IMG_8625-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/639bd855d495b78ff612d2e29325ab2c/original-IMG_8627-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91645e46999863079d941fab6e65f058/original-IMG_8628-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f136ba4af31fcc5c753342d856eb8ff6/original-IMG_8629-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/339a027a53823a55e57817bd492498ab/original-IMG_8630-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/283f4a6ce4765cb4906a759cf5c41f74/original-IMG_8631-1024x768.jpg2024-09-25 15:38:44 UTC6151828CEILING MOUNT Equipped With: Hood Blower User's Manual Reliance 2 HP blower 3450 RPM Soundpack Duct silencers Trunk 2000 (T-2000) Source Fume Collector Designed to handle one or two welding stations using Ex-Arms. Ceiling-mount configuration saves valuable plant floor space and provides optimum range of the Ex-Arms. FLUENT* designed inlet and dust hopper minimizes fume re-entrainment and reduce maintenance expense. Automatic pulse-cleaning system for continuous welding operations. Proprietary filter cleaning system lengthens filter life. Ultra-Web FR filter cartridges featuring fine fiber technology provide high filtration efficiency and long filter life. MERV** 15 filtration efficiency rating per ASHRAE 52.2-2007. Recirculation of clean air reduces need for costly make-up air. Datasheet: Trunk 2000 Fume CollectorIOM: T-2000 ManualToolroom & General MachineryDust Collectorsused3442-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151828-used-3442-550-donaldson-torit-t-2000-fume-collector-with-hood-blower-welding-fume1000 ACFM480 V 3PH110 V 1PHhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9943e787459dd6b831ca29a785c7b913/original-124-e1492170862703.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa5330f896587b171b321fbcb8fbb7ac/original-125-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0beee2ff4af34502ebc316723fef3c63/original-082-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19136fd81636f59277818b1f527b6a49/original-084-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dca4b7cb9e3e9063dcf875f2cd0b7f58/original-086-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09d295d37055d4c106449cde883b958d/original-090-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c09f3b67293a69479372c7950537711/original-094-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3702fcbc3562ebd0211f7ee2e8cbcb95/original-095-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b30d15d0e08157f17223943bbd7dc1c/original-096-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d647cb77eb522c418f79dad772d4e85a/original-097-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0061d964f03de23554512f7e7519dd87/original-101-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1c942f47ad65007a901ee6c5479b94d/original-102-1024x768.jpg2024-09-25 15:38:45 UTC6151829Equipped With: Handler Dust Collector in base - 3/4hp 1 PH Self-Contained W/Filter Bags Applications: Baldor Industrial Buffers are made to use with soft cloth buffing wheels and buffing compounds. Used for buffing and polishing objects to various degrees of luster.Toolroom & General MachineryDust Collectorsused3607-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151829-used-3607-550-baldor-1-hp-double-end-buffing-unit-with-handler-dust-collector-base407B1115/2306015.4/2.718003528C10".50/1.25620648" x 29" x 56" high250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f25bb3851fa1c63ed81bf2503b38bfed/original-IMG_2638-e1625059566141.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/716fc0326b98284e615679b43feaf0ce/original-IMG_2647-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e401bac89eaf88fa72f86f7dc5e5703/original-IMG_2638-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dd62f7c8651d1f2a2ea29a26dfdb566/original-IMG_2639-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c09c627c95d4c0b6d384c44765dfd3b2/original-IMG_2640-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19759592fde88ac1f39c5b9cbf191f7c/original-IMG_2641-768x1024.jpg2024-09-25 15:38:33 UTC6151830Voltage 220 /3ph/50/60-cycles Central Dust Collection Units for Multiple Work Stations Built-in Silencer on Dust Collector A 3 HP suction unit designed to provide suction for up to 8 work positions, simultaneously. Powered by a 3 HP ball bearing, capacitor start (single phase only) industrially rated brushless motor, the model 103 provides cost effective dust extraction with a state of the art drum cartridge filter technology which collect particles as small as 1⁄2 microns. The 103 dust collector has a suction capacity of 1250 CFM (cubic feet per minute) through the inlets provided. The unit is finished in a baked, durable coating, runs on 115V/60HZ and ships complete with a fusetron switch box and a box type silencer.Toolroom & General MachineryDust Collectorsused5920-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151830-used-5920-550-handler-red-wing-handler-model-103-torit-type-3-hp-dust-collector-w-bags410 lbs. [108.9 kg]30” W x 24 1/16” D x 58” H [76cm x 61cm x 147cm]https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/110b99a8e00f3d68609e1e349edfded3/original-IMG_8124-e1693315203483.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/468aff39895192783a49d8d19134228a/original-IMG_8128-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a127751d398721bcd6797ab79349ec5/original-IMG_8124-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6c212c88707cda656dfcaca4a3f9269/original-IMG_8125-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7104f81d175cfa41c05ff71eec95ac9/original-IMG_8126-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad1321e463088bcfcf72e7bbe5fbe806/original-IMG_8127-768x1024.jpg2024-09-25 15:38:32 UTC6151831The mentioned machine can treat gold and silver, it is just a matter of parameter setting. It is able to produce ingots with sizes from 1 Oz up to Kilo, as follow: · Gold/Silver bars of size 50 g, with a productivity of 48 pcs/h, · Gold/Silver bars of size 100 g, with a productivity of 48 pcs/h, · Gold/Silver bars of size 10 tola, with a productivity of 48 pcs/h · Gold/Silver bars of size 250 g, with a productivity of 24 pcs/h, · Gold/Silver bars of size 500 g, with a productivity of 12pcs/h, · Gold/Silver bars of size Kilo bar, with a productivity of 12pcs/h, With the same machine you can produce whatever shapes (rectangular, square, round…..) you need depending on moulds print, here some examples:Refining EquipmentIngot/Bar MakingnewPawtucket, RIhttps://www.goldmachinery.com/listings/6151831-new-goldpro-ikoi-kilobar-production-systemhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4122243891d8a3446465666b78c72a3f/original-IKOI1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f0fd062e54e4f8f68d0ada1d5f68aa9/original-22.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a309cdb2d80eff0ca70d5f8ee7375ec1/original-32.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2359bbfefb2ffef5c42a661b1bb25d4/original-42.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c3fa022502d564b1b31c6faa0bb6143/original-52.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/705e1d79dce7cc9712e5cabfffb8db5a/original-62.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc32af4ed3998fd21000e72ec783611a/original-pogopkgkppokwre.png2024-09-25 15:38:19 UTC6151832Single-phase, 115 volt Powerful 3/4 HP Buffer has 2-speed design for all applications: 1800 RPM for plastics and 3600 RPM for metals and nonferrous materials. 7.4 - 7.8 amp motor resists stalling even with applied pressure and provides added horsepower for hours of use. Accepts 8" diameter buffing wheels x 3/4" arbor hole. 29" overall shaft length (6-5/8" from end of shaft to housing) provides plenty of room for buffing large, odd-shaped pieces. 3/4" arbor. Includes nuts and wheel flanges Made in USA Equipped With: Handler Dust Collector in base - 3/4hp 1 PH Self-Contained W/Filter BagsToolroom & General MachineryDust Collectorsused3610-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151832-used-3610-550-baldor-2-speed-double-end-plastic-metals-buffing-unit-with-handler-dust-collector48" x 29" x 56" high250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abd629a53cd711f31fd41da2eca936c1/original-1-6-e1625059925989.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6ce682845de34c2fd09b363b018f75f/original-IMG_2683-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e15b275215a76e18f6a55d2a76fbd2b4/original-1-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe66dc287a07abcfca3ea443c1186fab/original-3-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ef5d4ad9c2b32ebdfd5ec33513f2c8f/original-IMG_2680-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71bfdf0396783ed80be5909b87ecba7c/original-IMG_2681-768x1024.jpg2024-09-25 15:38:33 UTC6151833220-440V/3PH/60HZ Equipped With: Power elevation Box table (as shown in photo)Toolroom & General MachineryDrill Pressesused7307-410Pawtucket, RIhttps://www.goldmachinery.com/listings/6151833-used-7307-410-alzmetal-radial-drill-3-x-9-model-ab3-r1-1/4" ( 32mm)36"9"120 - 1460 RPM (12)6".004" to .012"45"#327-1/2"2 HP25" x 59" x 90" high3550 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c9755c50bea599b344c5eb1c10ee9ac/original-7307-002-e1390576070409.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b0e0679131389cc488851903ee09b67/original-7307-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96d75c5641fc21372e5259d94f8b5edc/original-7307-018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9389624b2ec9de0f19714cb3611a24a2/original-7307-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd545e78a7cce740228f3773ec4f9d65/original-7307-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bb2af55f00f3c76d5cd22586db09854/original-7307-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aabfcbc73418ef688ade8771a3914ebd/original-7307-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57f2d5c89cfaf08aae9a489650c116f5/original-7307-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba2f5c8c7607b3ddd9272d994d0ccd35/original-7307-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3010a6fd605add3b631b06d24634e21/original-7307-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55394f82f33153a423e17e54e7ba28b9/original-7307-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4d561e3e8aae13afa09d79c38651d15/original-7307-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6f1568377afbc993dd4c59bef7617b0/original-7307-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e41b5a9967945f4f992efd21fe29e37/original-7307-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bceeec6c742c72d7fda8cb0429426f5c/original-7307-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33384804ff2667f7f3721f3b0c957439/original-7307-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1906bee9a568c5141093a82f3b7fdd06/original-7307-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6982b1188a4edc67cf96bb8ecb54c84/original-7307-016.jpg2024-09-25 15:38:38 UTC61518341982230V/3PH/60HZ Equipped With: Foot operated shaker bag system SilencerToolroom & General MachineryDust Collectorsused5919-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151834-used-5919-550-torit-model-84-whirlwind-3hp-cabinet-dust-collector875 - 1231 CFM7.30" - 5.00" (w.g.)4460 - 6281 FPM6"3-1/2" x 9-3/16"3 HP150 sq. ft.2 cubic feet28-1/2" x 28-1/2" x 48" High380 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d1d8031fcd90873c92a796ae379ce6a/original-image0-e1693315572287.jpeg2024-09-25 15:38:29 UTC6151835Manual Operation by Hand Wheel or with Optional belt driven motor connection S/N # 2727 Gear driven Center height 8 1/2" MAX Chuck 2½" opening 100 degree rotary base for tool post & cutter Cast Iron Construction estimated weight 1485 LBS Equipped With: 7 Pattern wheels Master Bracelet Pattern Roll Vertical Brocading Attachment with 5½" Diameter Horizontal Brocading Attachment 2 1/2 Diameter tool post & cutter complete change gear attachment Round & Oval attachment Chuck with 2 " diameter for work piece Flat chuck attachment With assorted work holders /hold downs Full Lettering set complete set of original change gears original paper work from previous owner Examples of Straightline Turning Assorted cutting Tools 22 brocading plates (see photo) Oval attachment & Chuck with 2 " diameter for work piece Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. This machine is loaded with tooling and accessories, notes, etc as taken from service from the Lindsay & Co in NYC - owners retired. Client list included Tiffany, Yurman, Etc...high end and quality precious metal work for trade since 1943. Click to view Handwritten Notes With Machine: https://goldmachinery.com///wp-content/uploads/2017/06/BROCADING-ENGINE-TURNING.pdf See our available brocading plates & rolls in stock: SAMPLES OF WORK:Toolroom & General MachineryBrocading Machinesused3382-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151835-used-3382-385-antique-ra-lienhard-suisse-chaux-de-fonds-horizontal-vertical-rotary-engine-turning-brocading-machine17 " Diameter55" x 48" x 55"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58330b3b2b1938513d9f5b0d97f57acd/original-051-e1467373419686.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a47830e54ee4294d0f7f082bfd2d594/original-043-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4df820d1a51da4c82bae5f8b54084b7d/original-0511-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e770ed3ce4856b3c61ccee4156377de/original-052-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8c03112cfaf56f40a9cec1911770907/original-053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f397e14afe56835f805f4a93413ac67d/original-058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4e68c0761a834c54dc098640c0ed392/original-059-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63be157021f5c6a29b7268fb79b362d1/original-070-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1337caff689d28b9705eb3f79eba2d14/original-071-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d2445cec6fbf515607bc4150d2d08c8/original-072-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9f676053157dfd763ff9de8063b508c/original-078-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61b02ef51c5f135b592b436df933be2e/original-038-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b27cc693507bc33265c0cfb5eb437db/original-039-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/948d866640db0b725df44a51a552bedd/original-040-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/625a53da9fb4a8ae9684aceefc9acbc5/original-041-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb6e6779cbe2247f9f0ad6c4d39be173/original-042-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e2d3a8ba9d0bbf5d3ea87b5eca7b42d/original-0517.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccef2fbb2515572b7348e1d6eb8a5353/original-0551-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d41f2597dffd001db8c7b7ec9d27972/original-0424.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cc02cb4b7674d67d3fe40dcd7b6ccd3/original-0443-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55aa3ceef370d18e831de249c6b4cd31/original-0476-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f06294e1384ce90ab76985bfeb18a19e/original-0486-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/709861288e1f77ec2071a425ec2bee0e/original-0492-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7b096a4a62579e0e691748d2e493283/original-0503-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0cc9380fd489a77a226d8c48eaee319/original-22-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd8e3561d0594172c1bf940ee6fb07f2/original-059-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/736338353381f7d46dcdeee95126f57b/original-031-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/baf801f18241b37dd19ee64fadd65c17/original-032-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3e0b30f1fe86ac33bb1db8a5cab3f0b/original-033-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f1eb152fe878c2ad4f9be8b06c07b18/original-035-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3917d35ea7697efe27dc38029272c038/original-045-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ba2d802878e16f4b9460ab92a6df912/original-049-1-1024x768.jpg2024-09-25 15:38:39 UTC61518363ph/60cycle /220 VOLTS 1 HP, 3,450 RPM DIRECT MOTORIZED HANDWHEEL GRADUATIONS, DOWNFEED Equipped With: 6" X 12" MAGNETIC CHUCK LUBRICATION SYSTEMToolroom & General MachinerySurface Grindersused3925-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151836-used-3925-420-6-x-12-concord-tool-room-type-hand-feed-surface-grinder6" X 12"13"0.001"7" x 1/2" x 1-1/4"0.0005"975 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7482d1dbe6d898caa4d75f0edde47411/original-IMG_7532-e1726087034827.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/daddaedb22406ac857c13ff759b49bf1/original-IMG_7539-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fca5060475d9a0aadd9dc5a56e834d6b/original-IMG_7540-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10fb519909bc73d3c30f33ec7155e093/original-IMG_7541-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcb131e7061f25b3f794fce17488f713/original-IMG_7542-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bed9138eacf586e7ed7c121946566f0f/original-IMG_7531-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c07d51cca4fee70b2e1f866d7bf72bec/original-IMG_7532-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3aa1274c660ca75edb3182d6c187feb/original-IMG_7533-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57bc901f4996efba2a1597356ffb4339/original-IMG_7535-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b0bb856a6eab022bb5be55d2a1fb5c4/original-IMG_7536-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c403a54dda3308f8db21df6badde6ff/original-IMG_7538-768x1024.jpg2024-09-25 15:38:43 UTC6151837NO.1 AXIAL FAN Priced for 4.500,00 Euros Ex-Factory, ItalyRefining EquipmentWater ChillersusedType 56Pawtucket, RIhttps://www.goldmachinery.com/listings/6151837-used-small-capacity-water-cooling-chiller-type-56-with-automatic-water-by-pass-manometer-and-filter30 lt.R134AWATER.15°C/20°C2,73 Kw. Approx.650x580x920h mm.125 Kg APPROX.2024-09-25 15:38:19 UTC6151838115V/1PH/60HZ Equipped With: ToolingToolroom & General MachineryHoning Machinesused2551-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151838-used-2551-700-sunnen-manual-horizontal-honing-machine-model-mbb-1290d0.120" - 2.625"1/8"2-5/8"300, 400, 650 800 RPM1-3/4"12 gallon1/2 HP, 115/230V, 1 PH32" x 39" x 58" high850 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19445416b51a4325f884ccaa10f3021e/original-IMG_6910-e1672947305234.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3946ed7b350b2c5835846e95444811b0/original-IMG_6916-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/048aa3733aaf418bb782027c4988da64/original-IMG_6917-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9b5d22960c9a915974884ad6a04c206/original-IMG_6918-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7c00d9d15de7a4d3f8588f7b77c305b/original-IMG_6910-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/909ef93bcfbed018b142bd9dd41745c6/original-IMG_6911-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e50b8d558852b76cb748e3fdbbef7187/original-IMG_6912-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42e79c1a8020160b21b526041f3a563f/original-IMG_6913-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcf9661ebb8b67ac8a2dc75df1fddadc/original-IMG_6914-768x1024.jpg2024-09-25 15:38:49 UTC6151839Reid618PEquipped With: Powered X & Y Axis Feed, 6″ x 18″ Permanet Magnetic ChuckToolroom & General MachinerySurface Grindersused3926-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151839-used-3926-420-reid-618p-6-x-18-surface-grinder-power-x-y-axis-feed6″ x 18″1220/440V(Wired 220)/3PH2,800 Lbs.60″ L x 48″ W x 78″ Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4d35eaf52aba67b777834b236eff792/original-IMG_2690-e1726085862278.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83d03d12d9832205a44a18e9dac09184/original-IMG_2696-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21ae5d1ada08501a514dc6decbc2d4cf/original-IMG_2697-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/772de61a0da56169871416e414243165/original-IMG_2690-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ef998dc4433807ac49b3ede2b17c333/original-IMG_2691-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb0ae48dda1e9e59170f1f62bd9bad4e/original-IMG_2692-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2231dd59e46aa5c2e8987a32ece41714/original-IMG_2693-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2581740397a7e2ca85d26fbe42a36a7/original-IMG_2694-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/811ad1fcad4c0c6ab1ef454847293205/original-IMG_2695-1024x768.jpg2024-09-25 15:38:43 UTC6151841Covel7A3/4 Hp General Electric AC Motor 208-220/440 Volt 3Ph /60/50 Hz Length: 48" x Width: 48" x Height: 73" Equipped With: Owners manual Brown & Sharpe 6" X 10" Magnetic Chuck (Manual)Toolroom & General MachinerySurface Grindersused7A15623417-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151841-used-3417-420-covel-model-7a-6-x-12-surface-grinder-with-brown-sharpe-magnetic-chuck7"1-1/4"3450/2850855 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfc40564a0ba9130c0892e57cf76c108/original-IMG_0877-e1705933933263.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d5a8986507b3ed4aebc3d7d0f96f08b/original-IMG_0890-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0f4c7080017ba5078358bd8ad06b19c/original-IMG_0877-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd15b0429ea64da390ec9b47793b889e/original-IMG_0878-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5324bed512cd917e87bface76cda378d/original-IMG_0879-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d2b89e3de4fc5bb555d79affe7d0210/original-IMG_0883-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40857e1370e8962dacf686644e7f7808/original-IMG_0889-1024x768.jpg2024-09-25 15:38:43 UTC6151842220 Volt / 3 Phase / 60Hz Automatic Cross Feed Automatic Lubrication System Operation Type Automatic Equipped With: Kanetsu Magnetic Chuck And Neutrofier 11 control Automatic Lubrication System Servo driven downfeed system (Z)Toolroom & General MachinerySurface Grindersused5291-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151842-used-5291-420-sharp-grinding-machine-surface-grinder-model-sh-1224-with-servo-driven-z-downfeed24 in10 in x 20 in14 in12 in20 15/32 in1"8 1/8 in11.6 in x 23.6 in1 in196 to 984 in/min0.200"0.0005"0.0002"18-3/4"19-5/16"6-3/4"5"0.050"10,0000.2000 in19 5/16 in0.0040 to 0.4000 in/min18 3/4 in6.6 to 82 fpm30.0005 inNon-Coolant Fed10,000 RPM0.0002 in5 in4,700 lbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d674f1ac3c93aca0b93ed691b2860b30/original-IMG_0333-e1701181484932.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d53a0d86d9021d4e1518fb2ddea76304/original-IMG_0349-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f21f7988d71ebd7b5176c86b41e0516d/original-IMG_0333-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8439469110343aed244d1119f0e25bad/original-IMG_0334-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78c5841f59ce55ef9256d5ad0c0fe7a9/original-IMG_0336-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1caf0e86b984bdd9c3b889ae98c1c19e/original-IMG_0337-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5d6ae8f892c592c13c3400d8d35ee84/original-IMG_0338-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccc3a10dc96496e4d1600b0c3cfabd0b/original-IMG_0339-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85e935e478b7c98f9e03bcca8fbadc87/original-IMG_0340-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70a18cea40821486147acaaebd78a8c5/original-IMG_0341-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/267702c17f1551e23529047a5538b58a/original-IMG_0345-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0cc9af6e44e499ac06d51572768a13f6/original-IMG_0346-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/144358b06fc3c1c36019b0d26b0d2509/original-IMG_0347-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a164c8e594b2a333113fdcffa0be1ddf/original-IMG_0348-768x1024.jpg2024-09-25 15:38:48 UTC6151843Timesavers137-1HD/6020HP motor Sander 1HP variable feed speed conveyor belt 15-45 FPM Single head 36" working width Manual adj. bed raise / lower, 7” thickness capacity. Equipped With: Push button magnetic controls, main motor load meter, 4” dia. solid rubber contact drum, graphite coated adjustable polishing platen, 6” dia. dust port, Original owner’s manual Several boxes assorted sandpaper as photographed The machine is offered in excellent condition, recently reworked by Boshco-Dustek, Inc. – Woodworking EquipmentToolroom & General MachinerySurface Grindersused3425-590Pawtucket, RIhttps://www.goldmachinery.com/listings/6151843-used-3425-590-timesavers-137-1hd-60-37-x-60-single-head-wide-belt-sander37" x 60"United States77" x 67" x 65" H1,909 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/554d547717c961b4ce0ed6ddc3f5239e/original-1-e1713186022146.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c5ef43d6aa96b08bcae5d6a54ab1ec0/original-IMG_1473-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b616029d599808eb296e28bbc3848529/original-IMG_1474-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efe41d69e462dd78a18aadfef767c54a/original-IMG_1475-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa784d9194653cf7f2ae8b0ba3b29672/original-IMG_1477-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cc30bc443f6cdd6f12934ab94603f2e/original-IMG_1478-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f79e68ed51dd8b3c252c46dd0c38f610/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbc4a3ced6e130883843718e13968684/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/525031514540d98e104bed5ad12c626e/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/255546922da6886bd2ba0a96049f37cd/original-4-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41c571c844c37f9b49229bb3d12ad600/original-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d536a48f1d011d0c6496eb36e6c5bd20/original-IMG_1459-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efc12251309a71d016a47ecd1b0eb15a/original-IMG_1460-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ba2735bb383d6aa48a10b1d7e5c70e7/original-IMG_1461-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcfdde21eb4e29ed1f374a781daf1375/original-IMG_1464-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7adf5ca222071379bfdb3ccb1fc37562/original-IMG_1465-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/695078fe0c5d538d81c7ef4324debda8/original-IMG_1466-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf7f204ffb413c052972e3ea71a0c136/original-IMG_1467-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cafeddb729c7c92b56f02dec384d2936/original-IMG_1469-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffc50733b1f496058b725051e134330c/original-IMG_1472-1024x768.jpg2024-09-25 15:38:49 UTC6151845We also have a large selection of brocading plates in plastic, bronze and brass material 5½" Diameter Can be used with Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. Brocading machines listed on eBay: http://stores.ebay.com/Gold-International-Machinery/_i.html?_nkw=brocading+machine&submit=Search&_sid=15895238 Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning MachinesusedBrocading PlatesPawtucket, RIhttps://www.goldmachinery.com/listings/6151845-used-antique-brocading-plates-in-stockhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d235b4914a7f37ca65c11fe1a7130366/original-Brocading001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cc655eacec2fa123f8c738243d78a5d/original-Brocading002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/038464bc646a5022b6dd425638f3ad99/original-Brocading003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca62d25fbf9743661de07d9a6fac1fe4/original-Brocading004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7b7fe933701bc13d1bf89c50598dff8/original-Brocading005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee7d61deccb79b45182d5576929f8ba8/original-Brocading006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/813d3cdbab57337acdcfe724e69c9960/original-Brocading007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c32173a616efff2e8ca9ed7861397be/original-Brocading008.jpg2024-09-25 15:38:36 UTC6151846220V/3PH/60HZ Equipped With: Foot operated shaker bag systemToolroom & General MachineryDust Collectorsused2530-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151846-used-2530-550-dustvent-cabinet-style-dust-collector-model-3-150800 - 1000 CFM8" diameter3 HP28"(w) x 54"(d) x 40"(h)430 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e86f62f30cb7637b3ae82b74a58eaf96/original-038-e1525372482866.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d79780f45b8aa88c15f3d7687c4e222/original-043-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14cdb67b928f3473dbb8e358601c0640/original-044-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09ee6e981b7f56e502c97746c00722e2/original-045-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f09175a18530ed683e938b3a950dad30/original-038-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5eada077de21d47afb146ffc5332be9/original-039-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de7c6d78d19a72e29a400257528e484a/original-040-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d43180673c48e08a6dd225d3cdfcdf3/original-041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e657b9e2372e17991a2d8c2ef9de3c37/original-042-768x1024.jpg2024-09-25 15:38:36 UTC6151847240/440 Volt / 3 Phase / 60 Hz Model 80 Equipped With: Chamber SilencerToolroom & General MachineryDust Collectorsused2803-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151847-used-2803-550-torit-3hp-cabinet-type-dust-collector-model-80400-580 CFM5.50" to 4.70" (W.G.)4528 to 6666 FPM4" x 3.5" x 7-13/16"3 HP150 Sq. Ft.2 Cu. Ft.28.5" x 28" x 48"340 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3246eef987439427cbf59d41058ef5e6/original-14-768x1024-e1592571935742.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d08dc6d7d1e77a26309560c97dd57f2/original-14-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61e8179effcf87ed1319b5643e050abe/original-205-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8426b399e75e9e2251d088cf3d4b52b2/original-206-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e0e47c98f5610bfbec286ba8a9e48a0/original-208-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2bdcc9374a51c103ff4adc003d8dbf7/original-209-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18439e7cfa24ad9bccf6e17ca5d0abd4/original-210-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fae0c7d7757f7297ae2446cffa1823d/original-293-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebaf366eb96b86f88862f32ad0182c0e/original-294-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42f54ba4416247d3c41eefd0df639665/original-296-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cdc26e440a1f69cdd802186dd5c641f3/original-2803-BAGS-845x1024-1-845x1024.jpg2024-09-25 15:38:39 UTC6151848Model#101 Serial #1975 Technical Data Cabinet style Will handle up to 9 works positions simultaneously Equipped With: Filter Bag SystemToolroom & General MachineryDust Collectorsused1760-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151848-used-1760-550-gesswein-torit-dust-collector-i-phase115/1/601975800 C.F.M1 H.P.424"X24"X48"H175 lbs(approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1780e96dd846e67b3b64b2576d1e7dfa/original-1760-003-e1690224235558.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c3c8737fd559e7218fba3187e6a841e/original-1760-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f577706b8ba6b9362ebf38b0671eaed/original-1760-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1897cb16405316386325b1fd77acf819/original-1760-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b618de98c1291a092d71d90a71e5e922/original-1760-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/714042bf4df182cf598a60b27c553924/original-1760-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8781f92c7ecf2848080677da9ce3217/original-1760-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1916aeba1ded284dc64e7bad62af4b0a/original-1760-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa6c87bd1eecfbd7da6251491603d156/original-1760-008-768x1024.jpg2024-09-25 15:38:37 UTC6151849Serial # N158 Voltage(V/PH/HZ) 230/460/30/60 2 stage operation: First stage is 24"X24"X2 wire mesh filter used for stopping chips and large mist droplets. Second stage is a fiber-glass filter. This pleated style filter stops solid particles or liquid droplets, which then drain to the bottom of the mist collector for disposal or reclamation. This collector is designed to control water soluble and petroleum based mists generated by wet machining, and helps eliminate in plant moisturization from floating mists that cling to walls, ceilings floors and equipment. Equipped With: 3H.P. MotorToolroom & General MachineryDust Collectorsused1758-550Pawtucket, RIhttps://www.goldmachinery.com/listings/6151849-used-1758-550-torit-1000-cfm-mist-collector-model-mc-10001000 C.F.M.8"28"X28"x68"H400lbs (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/917da9ce748c00cb96ef7b77581e9420/original-1758-001-e1415987792243.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0e5bb0419a3431233cb86d6be262574/original-1758-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd97e00faa1aa9f484892f75422eee64/original-1758-0011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/511b2e37028a2ced19b8c8d28aee740f/original-1758-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/042b5a3e791147653a6ded2a709bb8ff/original-1758-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64835ff04de6009a170e334688953592/original-1758-004-768x1024.jpg2024-09-25 15:38:37 UTC6151850Too numerous to list separately... MUST be seen in person to appreciate Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning Machinesusednot applicablePawtucket, RIhttps://www.goldmachinery.com/listings/6151850-used-antique-engine-turning-machine-accessories-parts-and-attachments-in-stockhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/985dc7866e84d0960a88251615cf4ac2/original-antiquesonshelving004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92fea8e1a6f579c45356039708346ec9/original-antiquesonshelving005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db2f42b006365e620773fffaabedc33f/original-antiquesonshelving006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20a53df20e8f1ab5ba092c7dfda44858/original-antiquesonshelving007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0552118dcd805a195d21e974c04b9270/original-antiquesonshelving008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dbf0ec368ba19c35b222df8f0887324b/original-antiquesonshelving009.jpg2024-09-25 15:38:36 UTC6151851Year Built 1913 S/N No. 738 Wood Base, Floor Model Design Originally Manual Operation by Hand Wheel Converted to Motor Drive 110V/1PH/60HZ Equipped With: 5 1/2" Diameter Copy Model Holder 2 1/2" Swiss Chuck Multiple Background Patterns Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. See our available brocading plates & rolls in stock:Toolroom & General MachineryEngine and Ornamental Turning Machinesused2987-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151851-used-2987-385-antique-ra-lienhard-chaux-de-fonds-brocading-machine7 1/2"49" x 44" x 53" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e63ab48831fc24c1c27fd015aaa748f4/original-5391.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ec8137fbec81a895d3e13c2caf20ac5/original-5391-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91353837e711d236a2d1dbbb5bcd62ae/original-5391-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa435f1685bcd35cd0ca876db8cd98a4/original-5391-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2759d9c1a934523de5045cae41b04745/original-5391-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb7139af8be339d2581c923d7d667fc3/original-5391-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41b92444c452cfd36d3e19ca9a4eca98/original-5391-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb48e74cc42bb4c793721c74a113669f/original-5391-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c14779b625c1f63889165aa0d32434b2/original-5391_th.jpg2024-09-25 15:38:40 UTC6151852XYZ System Highlights: Heavy duty yet compact laser marking workstation Motorized door with manual or automatic cycle Motorized and programmable X, Y and Z axis Large available marking area (26” x 16”) Quick red laser diode focus finder Machined t-slot mounting plate Large filtered viewing window Integrated control panel Interior work light Optional Items Include: Mobile base with lockable casters, storage space, swivel arm for monitor, keyboard and mouse. Plug-and-play motorized and programmable 4th axis rotary indexer for marking circumferential parts. Trolley style fume extractor PRICING ON REQUEST, PLEASE CONTACT USToolroom & General MachineryLasers Systems Including Marking & WeldingusedXYZPawtucket, RIhttps://www.goldmachinery.com/listings/6151852-used-goldpro-lna-laser-technology-xyz-laser-marking-workstation32.75”W x 41.75”D x 38.25”H26”W x 16”D22”15”20”110 / 220 VAC, 50/60 Hz, 10 amphttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7997d1231c6ef48ca3d534313e9c51e5/original-xyz-e1559134176241.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6c5c623ce3318276f07e15eba82fe8f/original-ms_53.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/340e003c0d9a48e1187064b5057915e7/original-3-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53ea15f053964292a9184d01ad50d8cd/original-7-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd2293092b8a4c19ef694e1b23300684/original-20-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f6f7848199921d99395bc97a26b459b/original-21-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9eebb5174d4ed05a219ae93bb3c9d6b0/original-36-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4941324948b0fc409a169405ff880412/original-xyz2-1-1014x1024.jpg2024-09-25 15:38:50 UTC6151853Toolroom & General MachineryMiscellaneous Grindersused5964-430Pawtucket, RIhttps://www.goldmachinery.com/listings/6151853-used-5964-430-gorton-bench-model-single-lip-cutter-grinder-model-265-1#4NS collet5500 RPM4"5/8"1/3 HP, 1725 RPM24" x 18" x 12" high125 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c50602bc36a85975d113b9624c27039/original-IMG_6619-e1666280535135.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b28be7c925c024878092e77320442ac5/original-IMG_6621-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f8a6be525f828518d5d27b5719339a0/original-IMG_6617-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9de7bd64d693aeb36679430bac73ba0/original-IMG_6618-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c0818a280574b3330491ad26e2747d2/original-IMG_6619-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/551ad4dff5cf01aeca124212716417cb/original-IMG_6620-1024x768.jpg2024-09-25 15:38:46 UTC6151854S/N 20457-MD MODEL S918HGRE Motor – 2 HP – 1725 RPM 230V/3PH/60HZ Table working surface – 8” x 18” Longitudinal table travel – 21” Cross travel – 9-1/4” Crossfeed – 0” to 3/8” Per Reversal Working height – 3-1/8” (min) / 15-1/2” (max) Grinding wheel size – 10” x 3/4” x 3” Spindle speeds – 2250/2850 RPM Table speed – 0 to 75 FPM Hydraulic pump motor – 1 HP – 1725 RPM Floor space – 68” x 45” Approximate net weight – 1600 Lbs. Height – 63” Equipped With: Walker 8" x 18" fine pitch permanent magnetic chuck CoolantToolroom & General MachinerySurface Grindersused3356-450Pawtucket, RIhttps://www.goldmachinery.com/listings/6151854-used-k-o-lee-8-x-18-surface-grinder-with-coolant-hydraulic-table-feedhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b0b7e033e1a41aeb4520ffd8730155a/original-1-e1587495214997.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4daa7ef4690b1ed84f4efd5e4707fdcc/original-IMG_8723-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ac9e952299c279dc50af4bca591a14f/original-IMG_8724-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74e05fa419eb4d520fe630b3601a96d2/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaea4412dbd0beb6b392740f364dfe99/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2927c48aaabd39180b4329de87e4e44/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53c7fdd4cc9afe1779cacd7831af7558/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d757da151eb024aebbe37300eab9fa4/original-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6916ed8b29a796d5d70892d74a9f959/original-IMG_8713-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1fda869745e84c75dc44cc5fdc8cf24/original-IMG_8714-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d28bfc62f55a0f32d45c76adb6ca10f/original-IMG_8719-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d60387fbf84e41807f88f18319bcd6fa/original-IMG_8720-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/373853d5d9eb95aaa86c9e77c0cc5c8f/original-IMG_8722-768x1024.jpg2024-11-06 15:53:23 UTC6151855Voltage 115 1 ph 60 HZ Belt length 48" Equipped With: 2 New Belts 5HP Baldor motor model CL3503Toolroom & General MachineryMiscellaneous Grindersused5963-430Pawtucket, RIhttps://www.goldmachinery.com/listings/6151855-used-5963-430-kalamazoo-48-long-x-2-wide-horizontal-and-vertical-belt-sanding-machine2″5https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f92361a96c90135fc3b8c5d53a061bd/original-IMG_6622-e1666281202999.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfd6a224ee8aef1e3652eb4d20633139/original-IMG_6624-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f874ba517944a4edd109d67c4180b2b1/original-IMG_6622-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d49709ca27949c4af392b3a5b3beb3e2/original-IMG_6623-1024x768.jpg2024-09-25 15:38:45 UTC6151856Less Motor Used to sharpen pantograph tools and other single lip style cuttersToolroom & General MachineryMiscellaneous Grindersused5962-430Pawtucket, RIhttps://www.goldmachinery.com/listings/6151856-used-5962-430-hme-deckel-alexander-gorton-type-single-lip-bench-model-cutter-grinder4" x 2"6200 RPM5"0 - 10 degrees17" x 14" x 15" high50lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21ae3059777fb04f50b4ddb07b0c5e35/original-1-1-e1666365504350.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2485d59e4100ee5c5dfd5dbfda59355d/original-IMG_6609-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28fcfba8464676ffebd3046fc8440dcb/original-1-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/224936e21a6f8d8f6436ea5ef3a1c9e5/original-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c43f472541e82185dd58e28ed6420cc6/original-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42a68f4f2c1beab2c4dbfa5c88b57fdf/original-IMG_6603-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd8b9cd84828618164596bcda10aed25/original-IMG_6607-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bf30f9c5692cb5f8044c7f5154cee92/original-IMG_6608-1024x768.jpg2024-09-25 15:38:47 UTC6151857115-230V/1PH/60HZ Equipped With: 1/3 Hp, 1725 RPM Motor Note: Will grind cutters with 1, 2, 3 or 4 sidesToolroom & General MachineryMiscellaneous Grindersused5965-430Pawtucket, RIhttps://www.goldmachinery.com/listings/6151857-used-5965-430-gorton-model-265-5-single-lip-bench-model-cutter-grinder4NS Collet type for straight shank cutters5500 RPM4"5/8"18.5" x 24" x 16" high150 lb.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4090f42a655f10ce63b83ee8937f6ac6/original-IMG_6610-e1666280301894.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bbb3cbab4b33d33c578162b2af833b8/original-IMG_6616-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6ab38d511938da724286d5796182ca4/original-IMG_6610-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f99d2382c2dd24a0411ba0c827f13644/original-IMG_6611-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6385a57b269485fe481193ec43e95dd1/original-IMG_6612-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5830f76fe278bed6f44864bf9ff81943/original-IMG_6613-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b52faaff8968ca967d34d4d20e70564f/original-IMG_6614-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d82aa153aa9d5cc7b1f028b1e8fab5c/original-IMG_6615-1024x768.jpg2024-09-25 15:38:47 UTC6151858220-440V/3PH/60HZ Built 1983 Equipped With: 5" x 10" Brown & Sharpe standard polarity permanent magnetic chuck One shot lubricationToolroom & General MachinerySurface Grindersused8343-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151858-used-freeport-hand-operated-6-x-18-surface-grinder-model-sgs6186" x 18"5.9" x 18"18.9"6.4"18.1"0.0005"1 HP8" x 1/2" x 1.25"3500 RPM1540 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/411ff2b2fb22354b58874fd6f586afae/original-IMG_4843-e1570112950254.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90befcebded1c04bb1230d321df069d4/original-IMG_4847-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ee92b3b8415c185dd2f57c8b25ae4e0/original-IMG_4848-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8f7f662e40eb94c0546d189798c2075/original-IMG_4849-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7fc2ba2518afa5e7b7c1c569bd062486/original-IMG_4850-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f87baf454443f2c0e6fc0ba5149535eb/original-IMG_4851-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eabdd6ad78cd8c410c3f46355bb39eca/original-IMG_4852-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c60f1314b346fdedee83c42c261d0531/original-IMG_4843-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05a68c5cb3368cde98d51d96c897b9ab/original-IMG_4844-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd2aa428819678470fa0826259e9523e/original-IMG_4845-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5a8f8e42d97da48e985768f321dbb61/original-IMG_4846-768x1024.jpg2024-11-06 15:53:46 UTC6151859115V/1PH/60HZ Used to sharpen engine turning tools and other single lip style cutters Equipped With: Drip pan base 2 - extra angle attachmentsToolroom & General MachineryMiscellaneous Grindersused2431-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151859-used-2431-330-lienhard-single-lip-bench-model-cutter-grinder4" x 2"6200 RPM5"0 - 10 degrees17" x 14" x 15" high50lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ad853afd9ea288e30975ef652d0c5eb/original-IMG-5211-e1525202210827.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/201db8fbfe2e363b6d2fedc635896d94/original-IMG-5210-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43e44c4107d787b781fec12c58b3ccfa/original-IMG-5211-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f27f0980650e32a9b1919c4abc54b07/original-IMG-5204-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d7b7a569caf3aab3423e29065d30df9/original-IMG-5205-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b43fd031b43183525a427913e1f36d4/original-IMG-5206-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/359ae96b8b9a0f8d7e07be7791804820/original-IMG-5207-768x1024.jpg2024-09-25 15:38:48 UTC61518604" Stroke Hand Operated Equipped With: Indexing Pattern Bar Holder 6 Pattern Bars Vise for 4 Parts 4 Tool Toolholder Examples of Straightline TurningToolroom & General MachineryEngine and Ornamental Turning Machinesused0347-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151860-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine26" x 27" x 62"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87e75319b54a83b1d2a92cac5b08a770/original-0347.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/934d0dfbd9edab827fa129adcc1d6558/original-IMG_5118-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c3bc17f4be2e5493836cdfc1425f9db/original-IMG_5119-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/683fa08ac6691bd792e72234ea32ff02/original-IMG_5120-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c3f588da72f581d3e06dc921dba7afe/original-IMG_5121-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32acf9a151cb7e79cecdbee6fe7702bc/original-IMG_5122-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14b07a7b247906cd97646b9f2f46727c/original-IMG_5123-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3495c54bd4b6ba27ea4ae17401720ed6/original-IMG_5124-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d4d022f1ecb3acc66d0c02201564cff/original-IMG_5125-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/116df53fc576be3e450ac97221e7971a/original-IMG_5126-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/945d2c0b936ce535aad0b5735aecb1e7/original-ET1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56cadaa833a57b63db99a5e9343ae47a/original-ET2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fd4c0810c5a3b5c416e0802b0bfdb4e/original-ET3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f95c20e0bcffebc2cb0d21abf8093005/original-ET4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c385d19db7ba178a8e6b8584a045b2b8/original-ET5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/806022389f3473fce4afd6070c1737c2/original-ET6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6622fe76809fa56cd26cf35145e7010/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de44b7c3c2f53db51462f0e0d662db21/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11ac7ad63c037ebb194ec7b04929054b/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4ab4c733b35820c7c40c4fb3548d40c/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b24ec988e87809cf9638c8f4f9ca6a71/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be79e97b0076bbca95293323304b2d84/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0404ca341b54246cea873c4d28268450/original-used-0347-385-kenloc-model-10-straight-line-engine-turning-machine.jpg2025-01-15 12:24:48 UTC6151861PULSE / YAG JEWELRY UNIVERSAL LASER S/N LWD4218 230 VOLT 1 PHASE THE LASER HAS BEEN RECENTLY REWORKED AND IS OFFERED READY TO RUN 0-9 MEMORY CELL ARE RESERVED FOR EACH OF THE 10 LASER PULSE WAVE-FORM PROGRAMS OVERALL SIZE 52" x 28" x 52" (INCLUDES WORKBENCH AND COOLANT TANK) WEIGHT OF LASER ONLY 75 KG Equipped With: GD65 CONNECTION lEICA MS5 SCOPE MANUAL LED DISPLAY QUICK ADAPTER FOR SHIELDING INERT GAS TUBING CONNECTION PEDAL COMMAND CONECTOR QUICK ADAPTER TO DRAIN THE OPERATING COOLANT FROM THE TANK AND OR TO CONTROL ITS PROPER LEVEL INSIDE THE TANK COOLANT TANK INTERNAL JOYSTICK - LOCATED INSIDE WORKING/WELDING CHAMBERToolroom & General MachineryLasers Systems Including Marking & Weldingused3932-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6151861-used-3932-300-zahntech-professional-universal-jewelry-laser-welding-system-benchtop-lwd4-recently-reworkedhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd7a270d2f59fad8ed7f387e64d25a6e/original-IMG_2177-e1723046536136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d1e67db8727cd9703d8869392920cd6/original-IMG_2190-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/804c1ab44e7d7dca86cf43eee5cf5013/original-IMG_2191-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e571bab9c2647fe58650a9271117ef92/original-IMG_2192-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a759982258aa4633c1110c7181ac2c0/original-IMG_2193-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3900d9e2d4bb2ceb6fa2583502f1532/original-IMG_2194-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/faa8159d7dee691fb11ecd518d9eb9c3/original-IMG_2195-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c221e9b21366e0b4a08c91a072b91b3d/original-IMG_2196-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df01df168e1551d0b2f4a5c397768c89/original-IMG_2176-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae8b0ff13b99c5f431a73e2627d51681/original-IMG_2177-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c73730e764e5ec5ba4fe601497c2d209/original-IMG_2178-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25e01e22b128a3ba1081e70c9ce859dc/original-IMG_2179-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbce1f5ebdc15b9e57835cbf207dcb12/original-IMG_2180-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d25807ae53f48443eb03c50bc782caaf/original-IMG_2181-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00518d9830514ad2fac1adcceae5ec41/original-IMG_2182-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08091082b85fdfc9755373b062dcbfe8/original-IMG_2183-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a20c9d9deddb3c430f714bac085fc2e/original-IMG_2184-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21892e78c41a88e6246eb77c2e37e5c1/original-IMG_2185-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b6e8e0ff9f35dc14ebc011794c5388a/original-IMG_2186-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bb8c0614788808bec9698ff5f964374/original-IMG_2187-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f9f7c314cd0464a572bcabefbcf7ac1/original-IMG_2188-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58c670ab99ef125fb1b787d353f6eea3/original-IMG_2189-1024x768.jpg2024-09-25 15:38:56 UTC6151862220/ 3ph / 50/60 cycles Spindle capacity:Toolroom & General MachineryLathesused5993-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151862-used-5993-440-hardinge-super-precision-dv59-secondary-operation-turret-lathe-parts-machine1-1/16"5"1-5/32"36"9"3-3/4"4"5/8"230 - 3500 RPM, variable67" x 30" x 57" high1200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56f0cc3646eef53f5a224adab6617fa9/original-IMG_5697-e1658409427859.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/150c58082a888d2f0bb6793b674102b9/original-IMG_5702-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ee24d6ea2e57d3a2b9a697de1b9f8ff/original-IMG_5697-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adbbbf29faceaf4bf8099585e9014f66/original-IMG_5698-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23faf9305d348b2ad3896d91710c618c/original-IMG_5699-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb72878d17358ee6563575bc4ae51edd/original-IMG_5700-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c49f92992d344bd4c80b57d4855cc3d5/original-IMG_5701-768x1024.jpg2024-09-25 15:38:53 UTC6151863Gold Machinery is an authorized Fasti Dealer for Sales, Service, & Parts. ND Yag laser for automatic and precise spot welding, suitable for all types of traditional chain making machines (curb, cable, venetians, bismark, etc) covering a wide rand of wire diameter and speed. Model FL3 Laser: Nd:YAG CE Product Available Ex-Factory, Italy Pricing Available Upon Request Packing & Crating AdditionalToolroom & General MachineryLasers Systems Including Marking & WeldingnewFL3Pawtucket, RIhttps://www.goldmachinery.com/listings/6151863-new-fasti-goldpro-fl3-50-watt-soldering-laser-for-chain-machine1.064 µm0.3 - 25 msec20 Hz (1200 shots/Min)> 50 W> 30 J/pulse> 4 kWSingle Phase 230 10% Vac 50/60 Hz2 kWInternal water/air T amb <35 Degrees C85 Kg125 Kg40 x 97 x 113 CMTypically 4-5 Weekshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ddea8e49f3c6ba37909f44a9ec77aa5/original-FL_3_FL3HP-e1496755969297.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac6dc50fa151af5e6d38ce40914561c/original-parts.png2024-09-25 15:38:48 UTC6151864Scroll Down To See Video! 220V/3PH/60HZ OFFERED AND SOLD AS-IS CONDITION Equipped With: Collet closer Lever Operated Cross Slide Benzinger stand Foward and reversing swith Less-Radius attachmentToolroom & General MachineryLathesused5989-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151864-used-5989-440-benzinger-turning-horizontal-ring-lathe-lever-operated-cross-slide-as-is40" x 21" x 50" high210 kg. ( 462 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/302e2622550d179f465b287870215d86/original-IMG_5746-768x1024-1-e1659103916984.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d0afd16a57bf3e883a642ef05b33aed/original-IMG_5746-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3fffbf81d898aa14a1ff4e1fc018175/original-IMG_5741-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86ff3aa4f2c3b30705ad77f9853eb4fe/original-IMG_5744-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd6356ea5d92a02268113f97c4d69b0b/original-IMG_5745-768x1024.jpg2024-09-25 15:38:52 UTC6151865Scroll Down To See Video! Laser Welding is one of the largest and most requested applications for laser technology today. LNA Laser Technology, well known for their industrial grade laser marking systems, is also at the forefront of developing advanced laser welding systems for manufacturing industries. Flexibility, reliability and performance is paramount with the LNA Compact Universal Multi-Axis Laser Welding Platform. The system as shown, includes programmable X Y and Z axes for focus and weld alignment and a rotary axis for welding cylindrical parts. Laser power can range from 150 Watts up to 1 Kilowatt depending on material, weld penetration and production throughput requirements. For the operator, the system is both ergonomic and user friendly. The motorized door is interlocked to prevent unsafe laser operation. The LNA Laser HMI allows a large number of welding recipes to be stored and selected as needed. The system incorporates a through the lens vision system to make part alignment and focus quick and easy. A few clicks on the touch screen display and the weld cycle is complete. The high precision optics, motion control and vision provides extremely reliable performance and part to part repeatability. XYZ System Highlights: Full-color 10" touchscreen user interface pendent Integrated cover gas and air knife delivery systems High-speed, high-precision, 4 axis laser welding workstation Custom recipe generation with memory for up to 500 recipes Robust, reliable, industrial design ready for factory integration Compact footprint; low power consumption (120/220V, 50/60 Hz) In-line machine vision for precise targeting and weld seam observation PRICING ON REQUEST, PLEASE CONTACT USToolroom & General MachineryLasers Systems Including Marking & WeldingusedLNA-UniversalPawtucket, RIhttps://www.goldmachinery.com/listings/6151865-used-goldpro-lna-laser-technology-universal-multi-axis-laser-welding-workstation4” (100 mm)4” (100 mm)4” (100 mm)360°24” total strokehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e006a5b466f4dd79ca69116a553451f/original-Open-e1559134668949.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b08be36bed6191161051bff3cee578fe/original-1-1-300x195.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71a29097fd2a48293bbcdbd6a2e0c41f/original-Dwyer_Weld_1-1024x768-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f3eec0e042d2449645742ffe66f098b/original-foto_grande_236.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c8df2e57f244dc24505903e13ea4443/original-foto_grande_243.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dee779166ccad89cd1283f5166067231/original-ws_22.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a696f31963d97049d7d9a663df0094f9/original-ws_23.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46b5ae1e6f8feb508df9ba8cc9f37a96/original-ws_351.jpg2024-09-25 15:38:49 UTC6151866Gold Machinery is an authorized Fasti Dealer for Sales, Service, & Parts. ND Yag laser for automatic and precise spot welding, suitable for all types of traditional chain making machines (curb, cable, venetians, bismark, etc) covering a wide rand of wire diameter and speed. Model FL3-HP Laser: Nd:YAG CE Product Available Ex-Factory, Italy Pricing Available Upon Request Packing & Crating AdditionalToolroom & General MachineryLasers Systems Including Marking & WeldingnewFL3-HPPawtucket, RIhttps://www.goldmachinery.com/listings/6151866-new-goldpro-fl3-hp-60-watt-soldering-laser-for-chain-machine1.064 µm0.3 - 25 msec20 Hz (1200 shots/Min)> 60 W> 30 J/pulse> 7.5 kWSingle Phase 230 10% Vac 50/60 Hz2 kWInternal water/air T amb <35 Degrees C85 Kg125 Kg40 x 97 x 113 CMTypically 4-5 Weekshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74f31577d63540260b708763a6d76e4b/original-fl3_hp-e1496756777615.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac6dc50fa151af5e6d38ce40914561c/original-parts.png2024-09-25 15:38:48 UTC6151867Gold Machinery is an authorized Fasti Dealer for Sales, Service, & Parts. ND Yag laser for automatic and precise spot welding, suitable for all types of traditional chain making machines (curb, cable, venetians, bismark, etc) covering a wide rand of wire diameter and speed. Model FL6 Laser: Nd:YAG CE Product Available Ex-Factory, Italy Pricing Available Upon Request Packing & Crating AdditionalToolroom & General MachineryLasers Systems Including Marking & WeldingnewFL6Pawtucket, RIhttps://www.goldmachinery.com/listings/6151867-new-goldpro-fl6-120-watt-soldering-laser-for-chain-machine1.064 µm0.3 - 25 msec20 Hz (1200 shots/Min)> 120 W> 70 J/pulse> 10.5 kWSingle Phase 230 10% Vac 50/60 Hz3 kWInternal water/air T amb <35 Degrees C115 Kg170 Kg47 x 112 x 123 CMTypically 4-5 Weekshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b9dacfa32c887749ba629c0a0498b0f/original-fl6.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac6dc50fa151af5e6d38ce40914561c/original-parts.png2024-09-25 15:38:48 UTC6151868Scroll Down To See Video! The LASF Series Fiber Laser Marker is a user-friendly computer controlled, cost effective alternative to mechanical engraving, pad printing, stamping or chemical etching. No longer constrained by size, the system can be offered as a desktop unit that can be operated virtually anywhere; or as a stand-alone, in-line or automated system within a manufacturer’s facility. The LASF Series Fiber Laser offers the benefits of noncontact, abrasion-resistant, permanent marking. Gone are the days of replacing costly tool bits, expensive ink, dyes and the labor costs associated with completing these tasks. LASF System Highlights: Fully Self-Contained, Windows based, Laser Marking System Embedded Industrial PC Ethernet Connectivity Color Touch Screen LCD Display for Laser Status and Diagnostics Available in 10W, 20W, 30W, 50W Models High Speed, Quality and Precision Marking Compact Footprint Air Cooled Wide Range of Fully Configurable I/O Capabilities USB Port Enabling Easy Loading of Marking Files Fully Solid State Control System for Speed and Reliability Laser Diode MTBF 100,000 Hours 2 Year Warranty 110 or 220 VAC PRICING ON REQUEST, PLEASE CONTACT USToolroom & General MachineryLasers Systems Including Marking & WeldingusedLASFPawtucket, RIhttps://www.goldmachinery.com/listings/6151868-used-goldpro-lna-laser-technology-lasf-fiber-laser-marking-workstationhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee2d8336661e9bdcbadd354236cb2a87/original-SystemShotAngle-e1441907116419.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4c51ee256b1379c2b5536887d90478b/original-NewRackFinal1-1024x725.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5eb437269d5778f16df1c170e471c63/original-SystemShotAngle1-940x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9edf00ea0a0c124b2aeca73c3c25529d/original-15.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2533edab1ecf68251ae484a3e8f83066/original-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65c2f84ef99ade3ca027081282d43241/original-21.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dab0e7c3d7bc6cf4091b2e69c5e3cae/original-36.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c54518d4a4bc8369e60a6493cb7897c2/original-ms_53.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5fd33fa62ff9746e6ae5b19eaaadd0c/original-3-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3865115b16798e134a8a825c135aa7fd/original-7.jpg2024-09-25 15:38:53 UTC6151869MODEL 32s-dl 24 AC S/N 1106-76 Equipped With: ON-OFF PUSH BUTTON SWITCH ON-OFF VALVE FOR COLLET CLOSER HARDINGE PRECISION CROSS SLIDE 3C COLLET CLOSER - PNEUMATIC TYPE SERIES 100 DC SPEED CONTROLToolroom & General MachineryLathesused2946-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151869-used-2946-440-dunham-dl-series-m-precision-lathe-with-pneumatic-3c-collet-closer-cross-slide110V/1PH/60HZ9"24" X 3 3/8" WIDE DOVETAIL37"38" X 28" X 50" H600LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40fcdbb3c0b380690ee645663e964b87/original-1-9-e1545401993494.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee2620515f629c4bedab3e3c67a91cb0/original-IMG-9713-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4573e65e4ba870fa23d869fefa9a8d1f/original-1-10-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aceb04dbb089f095743a2d70b8962784/original-2-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b540330ae01621b54af68dde64cf0a4a/original-IMG-9698-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bce3553d886db428ef1ec5ca4683929/original-IMG-9699-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa1103c22a8ec7fa3d57a7f1274fd67f/original-IMG-9701-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec3cd09751a485fd8e9437236241a549/original-IMG-9703-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44de21cff98dde96434156d727839f7f/original-IMG-9706-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bb5181f14cb2b9ad207db64e382b285/original-IMG-9707-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e45a2777470ee8af8591fb7dd75e7663/original-IMG-9708-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/285a38601ee9ffd05b580d4d63f2f3ed/original-IMG-9709-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e440c3977a82c8d751c41e305c3b72d/original-IMG-9710-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/366fbd074edbc4dc299c826337d1da4e/original-IMG-9711-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27c493a330ccdc83523b455a51304e54/original-IMG-9712-1024x768.jpg2024-09-25 15:39:01 UTC61518701957220V/3PH/60HZ Equipped With: Sony Magnascale DRO 3-jaw & 4-jaw chucks 22 piece Hardinge 5C collet set Aloris tool post with 4 - holders Face plate Steady rest Tailstock Jacobs chuck Multiple Morse taper drills Copy of original manualToolroom & General MachineryLathesused2562-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151870-used-2562-440-monarch-10-x-12-precision-toolmakers-lathe-model-10-ee12-1/2"7-1/4"20".0005" to .016 IPR(50)3 to 184 TPID1-3 Camlock0 - 4000 RPM ( variable)1-1/2"#2MT64" x 33" x 50" high3000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa2dcd63ace0712e54f8d15747c928a4/original-Monarch1-e1705935575324.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c482f97b18f365a5525affa30910231/original-Monarch3-1024x819.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e318a0f2428a4a57fa97f5bd9696224/original-Monarch1-1-1024x819.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2520d2b5f8ce2424dcb3b75754b9eac6/original-Monarch2-1024x819.jpg2024-09-25 15:38:50 UTC6151873Motor voltage 550v / 3ph 50/60 cycle Circa 1940 Spindle speed ranges: Low range, rpm: 25 - 1000 Equipped With: Chasing Dial Follow Rest Steady Rest, Capacity 3/8" to 5" 12" 4-Jaw Independent Chuck for Direct Mounting Micrometer Carriage Stop Work lamp Chip PanToolroom & General MachineryLathesused5295-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151873-used-leblond-17-x-34-regal-engine-tool-room-lathe-war-finish-circa-194017-3/4"10-3/4"34"1/2" to 6"1/2" to 3-3/4"1238 - 150039" F.B. / 73" L.R /59" Height3300 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d8a0e25ae03a29070d7501fadb78407/original-IMG_8785-e1697807382158.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/807313cc2b300d84c05bb6caf537612a/original-IMG_8802-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3eb6f6d43a0769415772788ba18c7a97/original-IMG_8803-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dabc5c085b2e223e388a7f45eb4e8d1c/original-IMG_8804-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b876fd1df1bf46f8ebcdc9a5518659a/original-IMG_8806-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a320e5d3d8d11d1324c1e379d640571a/original-IMG_8807-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/caecdf99d690a75148c71995a692ce3e/original-IMG_8785-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d299596605abe9ba588c7669b553e79/original-IMG_8786-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/798d0aff289169fb43ec668a7422830d/original-IMG_8790-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29265ca5733f920f7b875c2c8a9a1714/original-IMG_8794-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab179acc8dfebabb6d9b80635c39bba1/original-IMG_8795-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/172600c4a96480190d2bc67647b20b7e/original-IMG_8797-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/031c0562b28e4b46ad4dfb0c864a2427/original-IMG_8799-1024x768.jpg2024-11-06 15:53:59 UTC6151875220V/3PH/60HZ Radius adjustable from 30 - 50mm ( 1/8" - 2") Ring sizes and widths of rings are set of separate dials No measuring required By exchanging the from radius slide, the R3D allows the machining of the inside of wedding rings cylindrically Equipped With: Collet closer Radius attachment Lever Operated Cross Slide Benzinger stand Variable speed drive Original Flake marks on the ways Two tool holdersToolroom & General MachineryLathesused5999-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151875-used-5999-440-benzinger-inside-turning-horizontal-ring-lathe-with-precision-radius-attachment-lever-operated-cross-slide40" x 21" x 50" high210 kg. ( 462 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7a7babc771ef39905709a9a91c1b7a9/original-IMG_5730-e1659100887343.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bc6c743556f8a1569441a541ba2f297/original-IMG_5736-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0aeba79babc5e3fdc97c0c4e2fc01a20/original-IMG_5737-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a86defd08b7e192c7d3730c039752ecc/original-IMG_5738-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/636cd00e55cb38e7336079fd7a20ae4f/original-IMG_5739-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8f93010bb35c04cfd36b292899e2527/original-IMG_5740-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bdcdca67102859d79f1109568570515/original-IMG_5730-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/898b5531bd44b89024927da11a84e77a/original-IMG_5731-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/405330e7f62934f547c17fbe907df7f9/original-IMG_5732-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d51b8db92658001380e7838803a09b7/original-IMG_5733-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1527fa3c8687b3fa86fa499ef91dcc4/original-IMG_5734-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a24238417f8b572f26dc9a64311f7f07/original-IMG_5735-1024x768.jpg2024-09-25 15:38:56 UTC6151876115 V / 1 Ph / 60 Hz Equipped With: 3 Jaw Chuck 8" Face Plate Aloris Tool Post With 4 Tool Holders Cabinet Stand Owner's ManualToolroom & General MachineryLathesused8860-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151876-used-8860-440-south-bend-9-x-16-precision-belt-driven-lathe9-1/4"5"#2MT5-58"2-1/8"50-1270 RPM (12)3/4"1/2"1-1/2" - 8"4 to 224 TPI (48 Pitches).0015" to .0853" Per Revolution (48).004" to .0255" Per Revolution (48)1/2 HP48" x 26" x 52" H750 Lbs (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c02eb002894c30559849a7c1b8de044c/original-SB-001-e1376495726592.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eda9a06737c962ca8163217c00668233/original-SB-0011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/530528e695281d593bdc1097deeaf79f/original-SB-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ddd4d5ceb2210a7cab994c6c6924a761/original-SB-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e95f2eb789e47aed1183d57d7913653/original-SB-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbbc02bc41392a8c659e739625a32ea8/original-SB-005-1024x768.jpg2024-09-25 15:38:59 UTC615187712900.0Capacity Headstock Thread & Feeds Tailstock Motor 7.5 HP 3 Phase Other Standard accessories: DRO system 3-jaw chuck M.T.4# dead center Steady rest Change gears set Splash guard M.T. 6/4 sleeve Tool box with tools Follow rest Coolant system Optional Accessories: Work light Drill chuck with arbor Face plate Live center Quick change tool post 4-jaw chuck Lead-screw guard Index turning tools Options: New 20" 4-Jaw Chuck...$2250 Availability: Ex-Warehouse, CAToolroom & General MachineryLathesnewClark16x60Pawtucket, RIhttps://www.goldmachinery.com/listings/6151877-new-clark-16-x-60-precision-gap-bed-lathe-w-dro16" (410mm)8.8" (224mm)25" X 9.4" (640mm X 240mm)60" (1515mm)300mm1" X 1" (25mm X 25 mm)11.4" (290mm)5" (128mm)2.28" (58mm)D1-6 / M.T. #612 Steps, 25-2000 rpm1-1/8" (35mm) X 4 M.P.I. or pitch 6mm2-112 (60Nos)0.1-14 (41Nos)4-112 (50Nos)0.1-7 (34Nos)0.0011"-0.0633" / rev (42Nos)0.031mm-1.7mm /rev (42Nos)4.8" (123mm)M.T. 4#110.2" x 44.1" x 66.9" (2800mm x 1120mm x 1700mm4343 lbs (1970 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2d0cb973987c0340d331b547c02ce39/original-clark18x60.jpg2024-09-25 15:38:58 UTC6151878Scroll Down To See Video! 115 Volts / 1 Phase / 60Hz 4 Speeds 1HP Motor Hand Wheel 5C Drawbar Equipped With: Cabinet StandToolroom & General MachineryLathesused9031-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6151878-used-9031-400-motorized-speed-lathe21" x 20" x 50" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c9b37da75d959952d1b0867da6c8335/original-9031-001-e1368545416619.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f84c500af4512bad64429eeaa0f3c58d/original-9031-0011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/846c2a672dddef548f860ec708bf418a/original-9031-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5b406108eed2002e85ad715b18d407f/original-9031-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5647967adb7b057af34a832538b49a85/original-9031-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a56cceefc5934181a041a03ae6665e26/original-9031-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09c5fdeba6e5ec4f9c886c81a332784b/original-9031-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03349ef905e9c730f32ad8a168f509bd/original-9031-007.jpg2024-09-25 15:39:00 UTC6151879230V/3PH/60HZ 1HP Motor Equipped With: Steel cabinet stand 5C lever draw bar 5" 3-jaw chuck Compound X-Y slide 12 assorted 5C collets Lathe has been cleaned, cycled, and pained.Toolroom & General MachineryLathesused7424-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151879-used-hardinge-model-dv-59-super-precision-toolroom-lathe1-1/16" round 5C collets9"17"36"230 - 3500 RPM variable67" x 30" x 57" high1150 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/684d3637af6d79bb65bf974233ed5938/original-new-Gold-022-e1358174172818.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/776d0c6cf28016fc7349066113156310/original-new-Gold-036.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e296fa7565028d214e1421f7f810ea02/original-new-Gold-035.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85079e8853f7b0c60acf5ca75b1997fa/original-new-Gold-034.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbc238dae83929807fb3a876762364a6/original-new-Gold-027.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/410dc0715e85a0b7cd473a985dd70ccd/original-new-Gold-024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a391d38a82a2b0d00841169a96dd12f/original-new-Gold-023.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaf400b82cb97ca08729a35963333c0d/original-new-Gold-0221.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1da12ea1051d9b6fdf9b98de02a67cc/original-h-003-1024x768.jpg2024-11-06 15:54:53 UTC615188019999.0Capacity Headstock Thread & Feeds Tailstock Motors Other Standard accessories: This machine is ISO 9000 certified Digital readout system 3-jaw chuck 4 Way tool post Coolant system Follow rest Steady rest Center sleeve and centers 5-position auto stop Tools and tool box Optional Accessories: 4-jaw chuck Face plate Quick change tool post Work light Full length splash guard Taper turning attachment Micrometer saddle stop Options: New 20" 4-Jaw Chuck...$2250 Availability: Ex-Warehouse, CAToolroom & General MachineryLathesusedclark22x80Pawtucket, RIhttps://www.goldmachinery.com/listings/6151880-used-new-goldpro-clark-22-x-80-geared-head-engine-lathe-with-gap-w-dro22" (560mm)14" (359mm)32" X 12" (795mm X 320mm)11" (280mm)80" (2015mm)16" (400mm)1" X 1" (25mm X 25 mm)13-1/2" (345mm)7-7/8" (200mm)3-1/8" (80mm)D1-8M.T. #7 X #512 Steps, 20-1600 rpm1-3/8" (40mm) X 4 T.P.I. or pitch 6mm4-112 (5Nos)0.25-7 (24Nos)4-64 (50Nos)0.25-14 (34Nos)0.0011"-0.0316" (50Nos)0.030mm-0.850mm (50Nos)0.00024"-0.0068" (50Nos)0.01"-0.286mm (50Nos)7-5/64" (180mm)2-61/64" (75mm)M.T. 5#10HP1/8 HP (0.1 kw)145" X 38" X 52"141" X 45" X 64"6666 lbs (3030 kg)7480 lbs (3400 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea319495966ef1822bcddca81927edee/original-Clark22x80Gap-bedLathet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c484bf711c488f91bd31c63c2564db7d/original-Clark22x80Gap-bedLathe.jpg2024-09-25 15:38:58 UTC6151881Capacity Headstock Thread & Feeds Tailstock Motor 7.5 HP 3 Phase Other Standard accessories: 3-jaw chuck M.T.4# dead center Steady rest Change gears set Splash guard M.T. 6/4 sleeve Tool box with tools Follow rest Coolant system Optional Accessories: DRO system Work light Drill chuck with arbor Face plate Live center Quick change tool post 4-jaw chuck Lead-screw guard Index turning tools Availability: Ex-Warehouse, CA Optional 2-Axis DRO additional $1250.Toolroom & General MachineryLathesnewClark18x60Pawtucket, RIhttps://www.goldmachinery.com/listings/6151881-new-clark-18-x-60-precision-gap-bed-lathe18" (460mm)10.2" (259mm)27" X 10.2" (690mm X 280mm)60" (1515mm)300mm1" X 1" (25mm X 25 mm)11.5" (292mm)5.1" (130mm)2.28" (58mm)D1-6 / M.T. #612 Steps, 25-2000 rpm1-1/8" (35mm) X 4 M.P.I. or pitch 6mm4-112 (60Nos)0.1-14 (41Nos)4-112 (50Nos)0.1-7 (34Nos)0.0011"-0.0633" / rev (42Nos)0.031mm-1.7mm /rev (42Nos)4.8" (123mm)M.T. 4#112.2" x 44.1" x 68.1" (2850mm x 1120mm x 1730mm4343 lbs (2020 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2d0cb973987c0340d331b547c02ce39/original-clark18x60.jpg2024-09-25 15:38:57 UTC61518823 hp 220-440 main motor (wired 220). Weight 2500 lbs Solid cast iron base with hardened and ground bedways. Swing 14" Center Distance -40" Spindle hole 1 1/2"-d-1-4 cam lock Type Precision tapered roller bearings-head stock Inch & Mertric Threading- Shipping size 7'5" x 4' x 5' (LxWxH) Estimated Weight @ 4000LBS. Equipped With: 8" 3 jaw chuck 8" 4 jaw chuck 12" face plate Steady & Follower Rest 2 Axis Digital Read Out System Coolant System Foot Brake Aloris Type Tool Holder W/5 Holders MACHINE DIMENSIONS: 80" x 30" x 50"H MACHINE WEIGHT: 2,491 lbs. Options: New 20" 4-Jaw Chuck...$2250 Ex-Works, CA $10,400.00Toolroom & General MachineryLathesusedClark14x40Pawtucket, RIhttps://www.goldmachinery.com/listings/6151882-used-clark-14-x-40-geared-head-toolroom-lathe-inch-metric-new-w-dro-toolinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4e4243d985c853c2b43422c827ab1cb/original-P1000217-e1450450819712.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03c33e71df60215d23ac0ad8ac633d98/original-P1000210-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cddfebee7c77df256d4feff5065af5ec/original-P1000217-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcfa2577da357d166059937ef348dc85/original-P1000229-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78991bbd33794ff26e12425ce4ce540d/original-IMG_0951.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7c98d2603a9f291ab64db8ddbec1817/original-IMG_0952-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4871a0dad3bbc1e374e524780f261a8b/original-IMG_0953-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e65da50bc376567307433a01197a1120/original-IMG_0954-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/889797cc8e4b6e3bc4b234c73a6da5fc/original-IMG_0955.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/593c8e1a82e3b59ec5e8d4afbab365ee/original-IMG_0956.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30df06c2b2ad2e933a2046cb4055a129/original-IMG_0958.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/479fc61af1858a2da9bbadcf3a82c975/original-IMG_0959.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1173934c6263f5a531f375b8e92abd16/original-IMG_0960-1.jpg2024-09-25 15:39:03 UTC6151883Will fit Hardinge Dovetail beds on HSL-59, DV-59, DSM-59 and VBS lathes With (2) adjustable stopsToolroom & General MachineryTool Room Equipment & Accessoriesused2124-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151883-used-2124-440-hardinge-lever-operated-double-tool-cross-slide-model-e12-1/4" x 3-1/2"approximately 4"25 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6595cd4c92448fea6bbf54fbc140d0c/original-IMG_7561-e1581945196803.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/939db03dd1481cc8a4acbb129e4f3776/original-IMG_7566-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6e93be0d7e82312b9d638ed40675ecb/original-IMG_7561-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa870cebb3d421d3a3542640da4d4840/original-IMG_7562-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aae9fea01820c57943935f8c66cbff0d/original-IMG_7563-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b503b3e0e324152e87ecd98581783298/original-IMG_7564-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/901e0827226a850c6ddd0fd8d138da10/original-IMG_7565-768x1024.jpg2024-09-25 15:39:03 UTC6151884Toolroom & General MachineryTool Room Equipment & Accessoriesused3199-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151884-used-3199-700-kurt-6-anglock-milling-vise-pt-series6"5-1/2"15" x 13" x 6-1/2" high90 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04ade27e22954481b86165fd99ab2e1a/original-3199-1-MAIN-e1574104379192.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ab0ecd489b455223c80dc89e0671e8d/original-3199-3-1024x772.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa5dc3fa8801261961477e6bcd143337/original-3199-1-MAIN-1-504x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e9b90aa2f508fb41b17520025a9e0ad/original-3199-2-918x1024.jpg2024-09-25 15:39:02 UTC61518854 - 3/4" x 3/8" x 12" long tool mounting slotsToolroom & General MachineryTool Room Equipment & Accessoriesused3187-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151885-used-3187-700-12-x-18-cross-slide-table12"8"16" x 16" x 4-3/4" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2031e7b0137541a80d1c7f722e1272f/original-3187-1-MAIN-e1573912062897.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f12963afc673ab3f8d1c5a24be6a0ba/original-3187-4-800x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/284c337182353218d2c2827b8ab5cdec/original-3187-1-MAIN-1-1024x896.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0aa823323c07b404b00f81a508c18038/original-3187-2-1024x1006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a19b29b9e3393de06bb2735721512e7a/original-3187-3-798x1024.jpg2024-09-25 15:39:03 UTC6151886120V/1PH/60HZ 20 VA Equipped With: 2 - Mounting brackets Cover with see through glass insertToolroom & General MachineryTool Room Equipment & Accessoriesused9604Y6242564000013213-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151886-used-3213-700-honeywell-circular-chart-recorder-model-dr4200ev-2-00-bc000ec14" x 14" x 6"(h)10.5 lbs.for recording temperatures Over 24 hour periodhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6380d458628449e96ffab02a79b5bab/original-3213-1-MAIN-e1573913281826.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1ea5d6983265b70ea8040ba7df397c6/original-3213-5-1024x848.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d9d721f63c3618a6637b91c992410fe/original-3213-1-MAIN-1-1024x922.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9c860c1e422940a19a8f4a24cdf08c6/original-3213-2-942x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b46bf53e299aabeda3f6e3e723c7ecdb/original-3213-3-1024x870.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c397923d1dbaf4a6a1bafc1afa81a64b/original-3213-4-1024x879.jpg2024-09-25 15:39:03 UTC6151887Floor Model Wood Base S/N # 131 Built 1897 Manual Operation by Handwheel Equipped With: Toolholder With Radius Adjustment Examples of Straightline Turning Items with Ornamental TurningToolroom & General MachineryEngine and Ornamental Turning Machinesused0773-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151887-used-0773-385-jfb-straight-line-engine-turning-machine-circa-18975"47" x 34" x 63"H2½" Diameterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47c7150f4daed969c1ed30338472e0dd/original-0773-1-e1437595765158.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36f070e7df60de8ddfd8d1ac10110114/original-0773-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d81fb1e4ad629a9fe57d313765ab2a0f/original-0773-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acd47fe481109b5beeb85c59931fe9d0/original-0773-9.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/851db7c66dd36602503783748c828e88/original-0773-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/619e1bce939a38a4d16f399f8de687ca/original-0773-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/969d9651e8a23e8453af1dacbc888e0b/original-0773-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1acbc1bb9beef35defa481d499a94de7/original-0773-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23a62d63496a5eeadbce800b88a77fa2/original-0773-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03601775dc203686f13618f5622d9dec/original-0773-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b11174cc054285e46f48ee59bb44a085/original-0773-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/945d2c0b936ce535aad0b5735aecb1e7/original-ET1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56cadaa833a57b63db99a5e9343ae47a/original-ET2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fd4c0810c5a3b5c416e0802b0bfdb4e/original-ET3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f95c20e0bcffebc2cb0d21abf8093005/original-ET4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c385d19db7ba178a8e6b8584a045b2b8/original-ET5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/806022389f3473fce4afd6070c1737c2/original-ET6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed623d648b160d3d67a73555bb66c37d/original-ET7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1839f39f56481801727e8308180e09f5/original-ET8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcdc6c88afdc4838ee4e3b68648e72b0/original-ET9.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/253fca62c5b7f619fbc9b19b0a5384ec/original-ET10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f0906eacfb48c2ff709bf498439f696/original-ET11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e2c41aa6ad6f71b79ce95bd7c98f8cc/original-ET12.jpg2025-09-26 17:53:32 UTC6151888Toolroom & General MachineryTool Room Equipment & Accessoriesused9188-420Pawtucket, RIhttps://www.goldmachinery.com/listings/6151888-used-3188-420-6-x-12-standard-polarity-permanent-magnetic-chuckhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf283802123d87e34afb333793d552ac/original-3188-1-MAIN-e1573911867981.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/628e6a99bf4d12c876d1ab1f6753b181/original-3188-4-556x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af947eecc10c82030a60f070f988346d/original-3188-1-MAIN-1-664x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b861f1f676f13ab918137e48062c8d85/original-3188-2-635x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db7a7a8983df7e47c54c3de20086cf15/original-3188-3-697x1024.jpg2024-09-25 15:39:03 UTC6151889DV-59220 Volts / 3 Phase / 60Hz 9" swing 18" center distance Equipped With: Hardinge Toolmakers Compound Hardinge full bearing tailstock Hardinge quick production collet closer Push button control for variable speed Drill Chuck Ball bearing lever type 5C collet closer Hardinge 5" 3-Jaw ChuckToolroom & General MachineryLathesusedDV5987965991-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151889-used-5991-440-hardinge-dv-59-toolroom-precision-lathe-9-x-1819661-1/16"7/8"3/4"1-1/16" TO 6"2-3/16" - R.H.9"17"4-1/4"5"3-1/2"#3MT230 TO 3500 RPM1,250 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c8f99925c7e3a66bc2728a6fbb0f875/original-IMG_5651-e1657892043656.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/329d59587b8ad34da43d94166b6d76de/original-IMG_5658-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35c70fdad745ba9aaec30c6e2505a7a0/original-IMG_5659-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6717d56c9b62d0d6b1d686783706e1cd/original-IMG_5660-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57cc4a0cd1ad91ded795e1865d12c135/original-IMG_5661-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f622d2565194b5f709e95a77542706c5/original-IMG_5662-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cca58b44f1570eb3ab6f5732062b7ce5/original-IMG_5651-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d9ca1f99e975ba818eb370aef68a6bf/original-IMG_5652-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17bba82342e0f676c0543850c4da6932/original-IMG_5653-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/701f0b0adb72956a81cc5263d826f992/original-IMG_5654-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42b62df1184949852d5892b35dbab7b5/original-IMG_5656-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6909cfc3b56fdffced6edbd3ec9dc5c3/original-IMG_5657-768x1024.jpg2024-09-25 15:38:56 UTC6151890SET UP AS DV-59 TOOL ROOM LATHE SPINDLE CAPACITY: HEXAGON 5C COLLETS 7/8" Equipped With: COMPOUND SLIDE LEVER OPERATED TAILSTOCK BIJUR MIST COOLANT SYSTEM REAR SPLASH GUARD HARDINGE STANDToolroom & General MachineryLathesusedDV59195913090-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151890-used-hardinge-precision-secondary-operation-lathe-model-dsm-59220V/3PH/60HZ19931 1/16"3/4"5"36"9"17"4 1/2"#2MT230 TO 3500 RPM (VARIABLE)67"X 30" X 57" HIGH1150LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65cf1b038c3a776120d4c8653d6258e6/original-IMG_0344-e1600191489370.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b208ae0c79d849e57c45ac0c55192023/original-IMG_0337-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5999aac527cd427c80e67fcaa55c9b55/original-IMG_0338-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e34a24d277c55a3935031a5349d2c9a4/original-IMG_0339-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f65e0a5479575cd712ddbbfab47343a4/original-IMG_0341-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e96461ff7d3de16cb694a92f2b761646/original-IMG_0344-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd9d0b14bbba84f1c283275f374f31ef/original-IMG_0345-768x1024.jpg2024-11-06 15:54:14 UTC6151891220 Volt 3Ph. 50/60 hz S/N DV-59-8561 Spindle capacity: Equipped With: Quick production lever cross slide 6-Position turret tailstock Hardinge cabinet stand Coolant System Built In Assorted turret toolingToolroom & General MachineryLathesused3387-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151891-used-hardinge-precision-dv59-dsm-59-secondary-operation-turret-lathe1-1/16"5"1-5/32"36"9"3-3/4"4"5/8"230 - 3500 RPM, variable67" x 30" x 57" high1100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccf48e250a001dfb3db14938efb8d313/original-1-e1580838589599.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/24f30aba737315502ce72f22346ec51e/original-IMG_7490-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c71f463e2d0039bb1633a92dbe1c792e/original-IMG_7491-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1fd3bf4f21d901903708613cf9a3a787/original-IMG_7492-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b15535dbfdedfd6d4a5798995698c01/original-IMG_7493-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48b195bf558e4fabcfd3c7200ad82145/original-IMG_7495-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab34bceeb4814af3f79b5dc04763124f/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65fada1c0de9552102d1ca5f9c21839d/original-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aaa6f6fefb1fb48c9dd420e209b4bfb8/original-IMG_7486-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d55beb9a5f87438700707c9cfc99381a/original-IMG_7487-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58188ea82da8eb5bb9af947750018b6e/original-IMG_7488-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/091a4ff298c20639c3bdcca42dd3d827/original-IMG_7489-768x1024.jpg2024-11-06 15:54:35 UTC61518921995208V/3PH/ 60HZ Spindle capacities: Equipped With: Lever operated tailstock Hardinge Cabinet stand On board coolant pump Compound X-Y rest OFFERED LESS DRAW BARToolroom & General MachineryLathesusedDV5919724T2636-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151892-used-hardinge-precision-toolroom-lathe-model-dv-599"17"1-1/16"7/8"3/4"4-1/4"5"3-1/2"#2MT36"230 to 3500 RPM1 HP1150 lbs.67" x 30" x 65" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce4cad6647a724f6201a5eba2cf5cbbc/original-IMG_0325-e1600186310588.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13659f398543cc02df0f03d2bc950f67/original-IMG_0331-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72ec3334bc9b67dc3a9eb6267ba816c2/original-IMG_0332-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c61fe14f304b190d313d3a5c269fd213/original-IMG_0333-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5afe45b9114ed59afdf4be888e710f78/original-IMG_0325-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08c09709b3e9cd5798d7fccfa7a9367d/original-IMG_0327-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbf7b50ad31eb27ccf214afba417d0ec/original-IMG_0328-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fb8bc122767400d45c4803491b0148d/original-IMG_0329-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81ee328c330aaeb13d52d8a8c7d5eecc/original-IMG_0330-768x1024.jpg2024-11-06 15:53:38 UTC6151893440V/3PH/60HZ S/N hsl 56-4726-t Spindle capacities: 1-1/16" with round 5C collets 7/8" with hexagon 5C colelts 3/4" with square 5C collets 6" with jaw chucks Equipped With: Lever operated cross slide Lever operated 5C collet closer Hardinge taper spindle construction Automatic spindle brake Hardened and ground dovetail bedwaysToolroom & General MachineryLathesused9199-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151893-used-9199-440-hardinge-model-hsl-59-bench-model-super-precision-speed-lathe1981750/1800/3000 RPM10"1/2"29"(L)  x 33"(D) x 14"(H)300 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/001286784c02a697ef58cae0d6471bb1/original-new-001-e1390398334338.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ab5862dff0c28b56dabb8a39478f018/original-new-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ea29d0f8fe4040acff1c9696e386aab/original-new-0011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21361cd18009b27eb33f09ad1ae7a4d5/original-new-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ff2b1c4da84b884e7964955b0dbd3d1/original-new-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10c2e0efe611c8d97df725b6e9ee976c/original-new-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b116330a32ca553a5fae937f9637deb/original-new-005.jpg2024-09-25 15:38:58 UTC6151894480 Volts, 3 PH, 60 Cycle Serial No. HC-6422-T Turning Capacity - Maximum 6" Swing Over Bed - Maximum 9" Distance from Face of Turret to Spindle - Maximum 13" Travel of Cross Slide 4-1/2" Cross Slide Power Feed Range 1/4" - 10" IPM Spindle Speed - Low 125 - 1100 RPM Spindle Speed - High 1100 - 3000 RPM Approximate Dimensions 72" L-R x 28" F-B x 64"H Approximate Weight 1,750 Lbs. Equipped With: Single Point Auto Air Threading Attachment 5" Chuck w/ 1-1/8" Through Hole Hardinge 5C Collet Nose with Lever Collet Closure 8-Station Turret Electric Carriage and Cross Slide Feeds 8-Postion Stop Drum Built-in Coolant SystemToolroom & General MachineryLathesused8874-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151894-used-hardinge-model-hc-super-precision-lathe-with-threading-attachment1981Square Collets to 3/4"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c64243f31dc223f85ebcf91be1a26d0b/original-KGrHqZHJCIFH82D-N1gBSEpjlS6g60_57-e1380891505562.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47692068163c206f256d57c5c29528e9/original-KGrHqNHJBUFH70ykIBSEpQK60_57-1024x897.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f6fd8853e6620ca41fd89963f844411/original-KGrHqVHJBMFIC3b6RvcBSEp-5kZw60_57-875x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa44f31c048f1b44bcb3e53352ad324f/original-KGrHqVHJEwFIHWRnqdZBSEpsRpQ60_57-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/993a20c328ab32a291c9908df22effea/original-KGrHqYOKo0FICOHKvSBSEpbDU1T60_57-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95b2fbd9e916bf12430557ddd3b5a141/original-KGrHqZHJCIFH82D-N1gBSEpjlS6g60_571-1024x1006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/074e3e79859c6059d17049eee2fc5d87/original-T2eC16dHJHQFFhb3gzBSEpbRz9Ng60_57-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0db71cf7172f8ba04c9d243860483de6/original-T2eC16hHJGkFFm0Q27_8BSEpbLhDcg60_57-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2990e54ffb26c6e379c3bf6bb5a5c9cf/original-T2eC16hHJGYE9nookQb0BSEpnZd60_57-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e0afedf7bed3a25b56346c99c5e7fa7/original-T2eC16RHJHcFFk8Zq4BSEp5Wqw60_57-837x1024.jpg2024-11-06 15:55:05 UTC615189521000.0Capacity Headstock Feeds and Threads Tailstock Motor Other Standard accessories: DRO system 3-jaw chuck Driving plate Center and center sleeve Wrenches Oil gun Operation manual Optional Accessories: Steady rest Follow rest 4-jaw chuck Face plate Thread dial Longitudinal automatic trip Live center Quick change tool post Taper copy ruler 4-position longitudinal automatic trip Options: New 20" 4-Jaw Chuck...$2250 Availability: Ex-Warehouse, CA Estimated delivery time 60 days from orderToolroom & General MachineryLathesusedclark26x60Pawtucket, RIhttps://www.goldmachinery.com/listings/6151895-used-new-clark-26-x-60-precision-gap-bed-lathe-w-dro26" (660mm)18" (460mm)34" (860mm)11" (280mm)60" (1500mm)16-1/2" (400mm)ISO-C11 or ISO D-114" (ø103mm)9-1275 rpm. 18 steps (6-816 rpm. / rev.steps)4.3" (110mm)13" (325mm)2 TPI or 12 mm1-1/4" x 1-1/4" (32mm x 32mm)72 kinds 0.073-4.0666mm/rev72 kinds 0.036-2.033mm/rev72 kinds 56-1/4 t/inch72 kinds 0.5-112 mm/rev36 kinds 0.5-7mm36 kinds 56-4Dp3.54" (ø 90mm)6" (150mm)1-4" (10mm)10KW / 15 HP; 15KW / 20HP250W90W220V, 380V, 420V (50HZ, 60HZ)7165 lbs (3250 kg)8488 lbs (3850 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecdde8e20af38526e37a4ba9ca4debad/original-clark26x80.jpg2024-09-25 15:38:58 UTC6151896Radii & Angle Dresser Serial Number 701 Equipped With: 1/3 ct. roughing diamond Heavy duty felt padded fitted carrying case Operating instructionsToolroom & General MachineryTool Room Equipment & Accessoriesused2756-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151896-used-2756-700-j-s-fluidmotion-radius-tangent-wheel-dresser-model-rfg-551/32" to 1-1/2"0 to 1-1/2"8"1-3/8"5-1/2"3-5/8" x 4-3/4"13 lbs.1-1/8" micrometer travel14.5" x 8-3/4" x 6" high17 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3ccd24428071a7e0932f462e6d41b63/original-2756-1-MAIN-e1530275451928.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ad70410f41307e444a1d172230159a5/original-2756-5-915x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbb6e7efc4470092032d533e36f49f8c/original-2756-6-643x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6f43709cf2bc25b9bb75ebc7a2bcc85/original-2756-7-1024x605.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7eb050435f24934522f95a8dfaf1d37/original-2756-1-MAIN-1-878x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0086d05a7adeebd35666014fd3468466/original-2756-2-637x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f720be6ac5b7330a778274e6af287166/original-2756-3-881x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3737bef5a62e3227758f63699d95e27/original-2756-4-577x1024.jpg2024-09-25 15:39:06 UTC6151897NOTE: We have 4- LOTS OF 25 each Available Priced for $249. Per lot of 25 New in original packaging Heavy duty design With coil springs and side cut Made of drop forged steel Cushioned gripsToolroom & General MachineryTool Room Equipment & Accessoriesused3132-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151897-used-3132-700-lot-of-25-global-tools-koion-new-needle-nose-pliers-model-glc-1066,5"5 ounceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b368640f13161e461989c7eaab19afae/original-3132-1-main-e1552485595621.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/543bc7dedf2408b74b95a593a3df5afb/original-3132-3-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/987cae47054364e32d5181d7294114fd/original-3132-1-main-1-1024x742.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcb56741351132d8c52be89fc7472133/original-3132-2-478x1024.jpg2024-09-25 15:39:03 UTC6151898New in original packaging Heavy duty design With coil spring Made of drop forged steel Cushioned grips Weight, each: : 5 ouncesToolroom & General MachineryTool Room Equipment & Accessoriesused3133-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151898-used-3133-700-lot-of-40-global-tools-koion-new-micro-cutting-nippers-model-glc-1074.5"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56ae7a9b845b150be003e4a3189f7652/original-3133-1-main-e1552485994832.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/705cfa381565ec570b91e3c51ace279c/original-3133-3-729x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fef703a629e09f323e273cd1075ecda9/original-3133-1-main-1-1024x782.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b68eb00459a4558d6f569f69f9cd07b1/original-3133-2-515x1024.jpg2024-09-25 15:39:02 UTC6151899Capacity Headstock Feeds and Threads Tailstock Motor Other Standard accessories: DRO system 3-jaw chuck Driving plate Center and center sleeve Wrenches Oil gun Operation manual Optional Accessories: Steady rest Follow rest 4-jaw chuck Face plate Thread dial Longitudinal automatic trip Live center Quick change tool post Taper copy ruler 4-position longitudinal automatic trip Options: New 20" 4-Jaw Chuck...$2250 Availability: Ex-Warehouse, CAToolroom & General MachineryLathesusedclark26x80Pawtucket, RIhttps://www.goldmachinery.com/listings/6151899-used-new-clark-26-x-80-precision-gap-bed-lathe-w-dro26" (660mm)18" (460mm)34" (860mm)11" (280mm)80" (2000mm)16-1/2" (400mm)ISO-C11 or ISO D-114" (ø103mm)9-1275 rpm. 18 steps (6-816 rpm. / rev.steps)4.3" (110mm)13" (325mm)2 TPI or 12 mm1-1/4" x 1-1/4" (32mm x 32mm)72 kinds 0.073-4.0666mm/rev72 kinds 0.036-2.033mm/rev72 kinds 56-1/4 t/inch72 kinds 0.5-112 mm/rev36 kinds 0.5-7mm36 kinds 56-4Dp3.54" (ø 90mm)6" (150mm)1-4" (10mm)10KW / 15 HP; 15KW / 20HP250W90W220V, 380V, 420V (50HZ, 60HZ)7716lbs (3500 kg)9149 lbs (4150 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecdde8e20af38526e37a4ba9ca4debad/original-clark26x80.jpg2024-09-25 15:38:58 UTC6151900Equipped With: 4-5/8" bolt lugs for mounting 3 - longitudinal 5/8" T-slots REPLACEMENT COST NEW....$2399.55 Palmgren's rigid precision built slide tables are used for inspection and layoutas well as various machining and positioning operations. Single axis movement in the X or the left-to-right direction. All tables are equipped with counterbalanced ball crank handles that provide rapid, accurate positioning. Precision ground table tops to 0.001" total indicator reading Dials are graduated in 0.001 in increments Dials are graduated in 0.001" increments Ball crank handles do not extend below the base to eliminate interference with the machine table Bases have bolt lugs and 5/8" keyways for locating and accurate, secure mounting Table tops have a longitudinal and three transverse 7/16" T-slots. Dovetailed slides have adjustable steel gibs to compensate for wearToolroom & General MachineryTool Room Equipment & Accessoriesused2478-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151900-used-2478-700-palmgren-x-y-cross-slide-table-made-in-usa-model-192-16-dual-axis-positioning16" x 8"6-1/8"11-1/2" x 10"10" x 8"149 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c06f91da67a030dc54a8f1f3d377cfe/original-2478-1-MAIN-e1503406331943.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0df16fad91f73c60d6d628449e853a5b/original-2478-1-MAIN1-1024x801.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a76238ee412e68d431ca1257fae0d4cd/original-2478-2-1024x935.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a70e611abd85bae54cbafac0bbf245da/original-2478-3-1024x606.jpg2024-09-25 15:39:04 UTC6151901Toolroom & General MachineryTool Room Equipment & Accessoriesused1340-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151901-used-1340-700-18-horizontal-hand-operated-rotary-table18"16-1/2"3/4"1/2"23" x 5" high200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d9a56bec7d66448d5370d50078957b0/original-028-e1513128664180.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17379fb0dbf5436914435e90dadf121a/original-0281-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71c7d975f87f26cc14a1418730d76340/original-029-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a4e2c301bc82a98351c6c370f365216/original-030-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eddbc766fa3aa99f2fe8e53451a0533f/original-031-1024x768.jpg2024-09-25 15:39:05 UTC6151902Too numerous to list separately... MUST be seen in person to appreciate! Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning Machinesusednot applicablePawtucket, RIhttps://www.goldmachinery.com/listings/6151902-used-antique-engine-turning-machine-accessories-parts-and-attachments-in-stockhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4be4f9bf94cb6f1f09204827eac3718b/original-Antiqueparts001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/352fbe7eef2439f74213ac73f98b8228/original-Antiqueparts002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50c128b4c5d688a7557a40eb7919d512/original-Antiqueparts003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/baa58b659cab44bd8720c46134fcbc60/original-Antiqueparts004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a494c5688deb6c4c892088edc002002/original-Antiqueparts005.jpg2024-09-25 15:38:36 UTC6151903Scroll Down To See Video! Equipped With: 5C PNEUMATIC COLLET CLOSER ASSORTED 5C COLLETS ON-OFF PUSH BUTTON SWITCH ON-OFF VALVE FOR COLLET CLOSERToolroom & General MachineryLathesused2788-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151903-used-2788-440-dunham-second-operation-lathe-with-hardinge-quick-production-crosslide220V/3PH/60HZ9"24" X 3 3/8" WIDE DOVETAIL37"38" X 28" X 50"600LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94c49ef0beae3de962776fec6a79725a/original-IMG_7520-e1580930362166.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d13fabff3ea16d070cb50ed8e2feb39d/original-IMG_7520-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0ceec546cfe221f5174d02a2cdf14dd/original-IMG_7521-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72e5471f3f9f876cdc48a034adc5eb08/original-IMG_7522-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54b9ba093cbce3f9245d6a02abe45228/original-IMG_7523-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd3399ef4cfa3679718a49d8c5b0b5e4/original-IMG_7524-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/daf477835ded0b31b23cb87bd4e6ecaa/original-IMG_7525-768x1024.jpg2024-09-25 15:38:57 UTC61519042 - adjustable stopsToolroom & General MachineryTool Room Equipment & Accessoriesused2485-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151904-used-2485-440-hardinge-operated-double-tool-cross-slide-for-dv-59-dsm-59-hsl-59-lathesDV-59, DSM-59 & HSL-59 Lathes with dovetail bed12-1/2" x 3-1/2"approx. 4"3/4" x 3/8"12-1/2" x 4-1/4" x 11" high25 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84a35617887fe7aa9b2e6d61863b63db/original-2485-1-main-e1487777003544.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e25eb3d8ed1f46e018436756033bdc9a/original-2485-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/315c6c4db4ad5a85214ede6ac88c0f00/original-2485-1-main1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b73043fbfd3717b1bfa38818ad324a61/original-2485-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7023b0f8fed14efbd9d908a87d5bead7/original-2485-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30eda0d6f86712be8ed7505455b61c2d/original-2485-4-1024x768.jpg2024-09-25 15:39:06 UTC6151905Fits dovetail bedToolroom & General MachineryTool Room Equipment & Accessoriesused2339-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151905-used-2339-440-hardinge-lever-operated-double-tool-cross-slide-for-models-dv-59-dsm-59-hsl-59-lathes12-1/4" x 3-1/2"Approx. 4"25 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/baf5917984765ed8fb8fa57d748ed28c/original-2339-1-e1471619095829.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49c4508667bcce90671bdb9890c043aa/original-2339-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87440cc63599adce0640d6ef30922d9f/original-2339-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce4cc3d15863671dab060e28aa1c4d44/original-2339-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b205729b8fe4596d3f5f0396eb3a5336/original-2339-3.jpg2024-09-25 15:39:05 UTC6151906Accepts 5C collets to 1-1/8" 36 - hole index plate in 10 degree increments Vernier on back plate calibrated every 1 degree Collet locks in position for accuracy under load 2-5/16" spindle travel for flute grinding Equipped With: 1 - 3/16" 5C collet For use on grinders, milling machines & layout workToolroom & General MachineryTool Room Equipment & Accessoriesused2344-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151906-used-2344-700-5c-indexing-spin-jig-fixture-type-pf-709-1/2" x 5" x 5-1/2" high15 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/664e589917a86b1a19686c0de6380e66/original-2344-1-MAIN-e1471525275975.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e676081d88f831fe0f7ddaf2b611747/original-2344-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8a40677747ce2d052cafb1d60cbe8fa/original-2344-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecb7d6b9f1aa3fe50db43d3eddfb68aa/original-2344-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77fd1bbebd165461c10e6bebf3dfb8ad/original-2344-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02e73eedada158f76bc50b6f6e73965d/original-2344-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/498726fc68cfb9117fbc80d4e5ddf30b/original-2344-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3892cd2fbaeca23ad253bbbda0d96abe/original-2344-6.jpg2024-09-25 15:39:08 UTC6151907Manufactured by Schwerdtle Model PN-50/6-1-16 4 - rows of numbers 1 - row of lettersToolroom & General MachineryTool Room Equipment & Accessoriesused1483-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151907-used-1483-700-automatic-indexible-number-and-letter-stamp-for-foot-press-hydraulic-press-other-model-pn-50-6-1-163/4" round4" x 3-1/2" x 2-1/2"2 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a52a522594c55b634c70edcd7f5954f/original-1483-1-main-e1430307634916.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e418fb97851e22df23ba29fb4e469e88/original-1483-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a74535005e3bcca4e5dc96add15f6b1a/original-1483-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d6776e52d8c799497117ce138ad79ea/original-1483-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc68ad957ac544495404a693afa12925/original-1483-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b99198562a56b93a98df513373a5e36/original-1483-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73acb792dbbbb503c6910a6a4c2bea01/original-1483-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e449f97ec96a9f300eca9609446886e/original-1483-6.jpg2024-09-25 15:39:11 UTC6151908Steel collet, #8 series Constant speed tapping, reversing tapping CST gives the ability to maintain a constant cutting speed while tapping for the ultimate thread quality and tap life. The standard housing design is used with stop arms and torque bar holder assemblies Equipped With: Steel collet drive spindle 1" straight shankToolroom & General MachineryTool Room Equipment & AccessoriesusedLLE9001991525-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151908-used-1525-700-tapmatic-ncr15-cst-series-tapping-attachment-for-cnc-machines#0 - #6, M1 - M36,00098 deg. In - 102% outhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b4f8672dae418f80e38ebe56912e1ae/original-1525-1-main-e1430937892130.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea760f1138bc29d14dd0f3365a2accaa/original-1525-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f44e78e67d517ff92431289650ee6773/original-1525-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ac34cf91ba0d3ebeb0de8a30947c33f/original-1525-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4eb7a65f856c0c5244f702e1cd197002/original-1525-3.jpg2024-09-25 15:39:08 UTC6151909Constructed of machined steel 2-Jaw self-centering design Jaws Drilled for Pins Equipped With: 2" tapered mountToolroom & General MachineryTool Room Equipment & Accessoriesused1840-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151909-used-1840-700-ornamental-engine-turning-work-holding-self-centering-vise-watch-makers-jewelers5 1/4"L ~ 2"1/2 W  ~ 2"1/2 Depth2"1/24 lbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dda5d4ba32aac43a36980c716e2f49fb/original-next-002-e1441797726853.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee5b9e3c43f531fc470f465792a071ad/original-next-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bebc3846e19e44c28c93dfb9ad086761/original-next-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e364fbce868ee8e6ecc2718c1c555d4/original-next-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/613219222f989fada79bf560616ebe4b/original-next-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18829297a98c7a7eabe196b8d29dc5cc/original-next-0021-1024x768.jpg2024-09-25 15:39:08 UTC6151910Containing 4 vise's 2" jaw width Overall size 13"L to R / 9" f to b Constructed of machined steel Jaws Drilled for Pins Equipped With: Additional 3" by 2 1/4 with flat work holder in center of vise with Small screw adjustment 2" tapered mountToolroom & General MachineryTool Room Equipment & Accessoriesused1841-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151910-used-1841-700-ornamental-and-engine-turning-vise-watchmaker-and-jeweler3"25 lbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e734b317cca27bd0a2d543c5952218b/original-vise-002-e1441798218409.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/388356cee175a3032b107928caa6b1bd/original-vise-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aee9913a6aac8d0fc4b4b2eba9f4b957/original-vise-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08d11a45b066c9069fbf7c90c753f0ae/original-vise-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/114daf1670b650b6ce05f11bf412bcde/original-vise-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85e74593464a756ef00c0bdfb902df0e/original-vise-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b15f1e8974091f8ab80a5a7dad2ebd1/original-vise-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30b2367496b24ca78d55900f14aa7b73/original-vise-0021-1024x768.jpg2024-09-25 15:39:09 UTC6151911110V/1PH/60HZ Digital readout Mounted on #7004 DGS-E adjustable dial gage stand 4" maximum height capacity 2-1/4" round flat anvil Equipped With: On-Off switch 4" long probeToolroom & General MachineryTool Room Equipment & Accessoriesused1490-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151911-used-1490-700-mititoyo-digimatic-height-indicator-stand-model-543-425-12" ( 50mm).0001"/ 0.001 mm16"H x 6" x 4"15 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5da43cd3029141a3446413c9cde18230/original-1490-1-MAIN.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aaa86dd49ca7e6e7d6737f4173f45678/original-1490-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3831791dbbd1a66a573ad4ff541f656c/original-1490-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf7f3088555f5826446830e37f964f23/original-1490-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/693ee1172fb7b918f0204050be2b2e01/original-1490-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9c021b6ac91cb0153a27a18acfde74c/original-1490-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b3eeeaa67cbd686d56758bfccf2374d/original-1490-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/842510adfedc9c004f4c5d2142a7129f/original-1490-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3ed7de5c6ca07972111168e841a1f89/original-1490-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80e6f68952c64e62b64568c898b75b45/original-1490-9.jpg2024-09-25 15:39:13 UTC6151912Will fit Hardinge Dovetail beds on HSL-59, DV-59, DSM-59 and VBS lathes With (2) adjustable stopsToolroom & General MachineryTool Room Equipment & Accessoriesused2110-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151912-used-2110-440-hardinge-lever-operated-double-tool-cross-slide-model-e12-1/4" x 3-1/2"approximately 4"25 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7a756d6692fdb372edea547863a1133/original-IMG_7575-e1581945564392.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/024c57e790906c8ec5b7cf8d3b256506/original-IMG_7577-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbbb191600eda4b8f6da50eae4ee3559/original-IMG_7578-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1813e93c7a6c2c5f68908200cdf74de/original-IMG_7575-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ee35f8ef98395c2593df7e216e707af/original-IMG_7576-768x1024.jpg2024-09-25 15:39:00 UTC615191315475.0Capacity Spindle Feeds and Threads Compound Rest 75"/145mm Tail Stock Motor Other Options: New 20" 4-Jaw Chuck...$2250 Equipped With: This machine is ISO 9000 certified Digital readout system 3 Jaw and 4 Jaw chucks 4 Way tool post Quick change tool post Coolant system Follow rest Steady rest 5 Position auto stop Tools and tool box Foot brake Face plate Work light Full length splash guard Optional Accessories: Threading Chasing Dial Taper Turning Attachment Protection Screw Tool Post Cover Quick Change Tool Post Tank Chains Availability: Ex-Warehouse, CA 45-60 Day Lead TimeToolroom & General MachineryLathesusedGoldProClark20x60Pawtucket, RIhttps://www.goldmachinery.com/listings/6151913-used-new-goldpro-clark-20-x-60-geared-head-engine-lathe-with-gap20"/ø500mm12"/ø300mm28"/ø710mm9"/240mm60"/1500mmø4/ø105mmD1-812 Steps 36-1600 rpm12.5"/320mm2TPI or 12mm1" x 1"/25mm x 25mm18"/min (60Hz)7.6/min (60Hz)0.0023-0.0937"/rev. 65 kinds (0.063-2.52mm/rev)0.0011-0.040"/rev. 65 kinds (0.027-1.07mm/rev)1-1.4mm 22 kinds28-2TPI 25 kinds0.5-7MP 18 kinds56-4 DP 24 kindsø3"/ø75mm6"/150mmMT47.5kW 10HP0.25 kW0.12 kW5511lbs./2500kgs130"x46"x71" / 3.30mx1.15mx1.80mhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8dbfdefe124f79f18dd3abf200184c31/original-GoldproClark22x60.jpg2024-09-25 15:38:58 UTC6151914Scroll Down To See Video! Equipped With: 5C COLLET CLOSER - PNEUMATIC TYPE ASSORTED 5C COLLETS ON-OFF PUSH BUTTON SWITCH ON-OFF VALVE FOR COLLET CLOSERToolroom & General MachineryLathesused2787-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151914-used-2787-440-dunham-second-operation-lathe-with-hardinge-quick-production-crosslide5c-DL-24-AC220V/3PH/60HZ9"24" X 3 3/8" WIDE DOVETAIL37"38" X 28" X 50" H600LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99e6a0921c73891d14ee09acbd72eddd/original-IMG_7526-e1580930199697.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efe288cae6777b8f285e174337158d40/original-IMG_7526-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6da9c939e208025912919234a6789ffe/original-IMG_7527-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22abae72f8b2178a2cd48809cd3820c7/original-IMG_7528-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c23926bb7fc6f063ad032a04b96f0544/original-IMG_7529-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25cfbf7c55aa27d54b137f181a1db747/original-IMG_7530-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4575da585c53f2187f0472ede91c40d/original-IMG_7531-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc641aa329e5d6605ac29d00d6f9f459/original-IMG_7532-1024x768.jpg2024-09-25 15:38:59 UTC6151915AngLock design assure the movable jaw does not lift. Hardened vise bed. Semi-hard steel screw. 80,000-PSI ductile iron body. Equipped With: Vise Handle The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises. All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.Toolroom & General MachineryTool Room Equipment & Accessoriesused4151-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151915-used-4151-700-kurt-6-vise-milling-cnc-original-anglock-d-series-model-d675-with-handle6"1-3/4"7-3/4"18" x 8-3/4" x 4-3/4" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac52e714ea069735183d806350bc779e/original-IMG_1257-e1610629567237.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f95bc47b088c76d6906fd8462da160af/original-IMG_1258-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1303fe748fe300012aea5a38049ed182/original-IMG_1259-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bca55bb180e7d6fd097779c696c3c6f/original-IMG_1256-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8146ff332266565e0f2002eaeca71efc/original-IMG_1257-1-1024x768.jpg2024-09-25 15:39:01 UTC6151916Will fit Hardinge Dovetail beds on HSL-59, DV-59, DSM-59 and VBS lathes With (2) adjustable stopsToolroom & General MachineryTool Room Equipment & Accessoriesused2452-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151916-used-2452-440-hardinge-lever-operated-double-tool-cross-slide-model-e12-1/4" x 3-1/2"approximately 4"25 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca4e48bf6988faa95adc9cff502de701/original-IMG_7573-e1581945423956.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9b76d4cf53db527267342ee33baf950/original-IMG_7570-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f06f0fd8db08b33e3f170a8da74f2633/original-IMG_7571-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4d984b8f99ffaa86c2267736444bf64/original-IMG_7572-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e94a2e1c4a2bb98c231de0165faf1c38/original-IMG_7573-1-1024x768.jpg2024-09-25 15:39:01 UTC6151917220V/3PH/60HZ Catalog #P-315-3 Equipped With: Pendant control TrolleyToolroom & General MachineryMaterial Handlingused8181-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151917-used-8181-560-budgit-model-312575-65-2-ton-electric-hoist4000 lbs.8 feet/minutehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/207aef3c734809ee4f0af0cc6a54fcff/original-8181.jpg2024-09-25 15:39:10 UTC6151918Toolroom & General MachineryTool Room Equipment & Accessoriesused2039-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6151918-used-2039-580-rapid-air-rapidair-a-2-slide-feed2"1-1/2" maximum.002" - .040"260 maximum20 lbs.5 lbs.9" x 4" x 3" high​https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4932a7bb6515e10e11730a97594ec9f6/original-2039-1-MAIN-e1451485082611.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f95ffb8304b8f9a38c503d84ef162384/original-2039-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d902a4fe956c85f730d6c8791f7c5dec/original-2039-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63f016b6d292eb80ecb54c2c41a38c4d/original-2039-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efe6b914a011e860cf407b1b0cedad6d/original-2039-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f014315a14b15f4c328e4559bb36c0a/original-2039-4.jpg2024-09-25 15:39:07 UTC6151919Accepts 5c collets to 1-1/8" 36 - hole index plate in 10 deg. Increments Vernier on back plate calibrated every 1 degree Collet locks in position for accuracy under load 2-5/16" spindle travel for flute grinding Equipped With: 1 - 3/4" 5c collet For use on grinders, milling machines & layout work Note: Being sold exactly as described and photographedToolroom & General MachineryTool Room Equipment & Accessoriesused1515-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151919-used-1515-700-5c-indexing-spin-jig-fixture-for-grinders-milling-machines9-1/2" x 5" x 5-1/2" high15 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f04201163dd0d30d2616997fbe428fa/original-INDEX-1-MAIN-e1444663817196.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81bab2871c7ccea250e373d2e62ead08/original-INDEX-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eabfed75496ee4f27a7b8014f5417a2d/original-INDEX-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/746cea5396c75d609e4c1324ecc02fd3/original-INDEX-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbccebd9345b45e069eee672bcf710f/original-INDEX-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f91701d09f7977fb93709e5d9cb068ee/original-INDEX-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad2c683a0fa18adc1d81b1fb096d0b63/original-INDEX-6.jpg2024-09-25 15:39:07 UTC6151920Toolroom & General MachineryTool Room Equipment & Accessoriesused2068-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151920-used-2068-700-rapid-air-rapidair-a-2-slide-feed2"1-1/2" maximum.002" - .040"260 maximum20 lbs.5 lbs.9" x 4" x 3" high​https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92a827f478c3ed4f3602a3bf0e588346/original-2068-1-MAIN-e1451484234835.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b6413300f70afca980f2c54c22a1967/original-2068-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaae2f5ef2ea417dbde7fb87931a0470/original-2068-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/150e7445d8af3aa5103342cf9c2be199/original-2068-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed512daa352e279706a6e023b4ec6bb7/original-2068-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b0a1a406ef8d08338f2f33564f1028c/original-2068-4.jpg2024-09-25 15:39:07 UTC6151921Platform work area 21" x 24 " Overall size 22" x 34" x 48"h Estimated weight 175 Lbs Equipped With: Push down floor lockToolroom & General MachineryMaterial Handlingused8836-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151921-used-8836-560-stainless-steel-roll-around-carthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0e2988814ac034b94ecff1761d18677/original-next-013-e1418053844584.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de27c79f1317bbc82b5a107322f1f42f/original-next-016-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90be160b00e02e3dd93247d8a162ee90/original-next-0131-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2abaa21314b37c2bc996834f84e1e389/original-next-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2f7d53c598ba7eddc80dc659ac42026/original-next-015-1024x768.jpg2024-09-25 15:39:10 UTC61519221-3/4" - 8" threaded mount 8 - 1/2" x 2-1/2"(L) mounting slotsToolroom & General MachineryTool Room Equipment & Accessoriesused2188-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151922-used-2188-440-10-3-4-diameter-face-plate-for-lathes10-3/4" x 1-1/2" thick35 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79db2589d59a9329c540d6b7e04a939a/original-2188-1-MAIN-e1461329585973.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c777f58c2d39a70f44193025e6aefabd/original-2188-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/389821930c898da9b81b43c11a023d77/original-2188-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fec53e3bde2de42ba9694560d8ea68d0/original-2188-2.jpg2024-09-25 15:39:05 UTC6151923ENPAC55 Gallons Drum Dolly Equipped With: Internal Sump Poly, Yellow Plastic WheelToolroom & General MachineryMaterial Handlingused7406-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151923-used-7406-560-enpac-spill-containment-caddy-model-5300530093600 Pounds80 Gallons69 Inches27 Inches32 Inches$804.50https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ae4cdeb657302aa0a753d2c9ee0b781/original-n-016-e1362263328529.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b005be55162059456714adc4b8ff256/original-n-0161.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc7b716b4a0f7b6f651a726be1ad8f4c/original-n-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60e9e6df197f079a58fe2e5287769c3e/original-n-018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/257c6069733b5f120b5c78ec7a45b434/original-n-019.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/655e99827d1d65cc0edf18c975e7425e/original-n-020.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8c7702315b61ac2eef9b2ef4348975d/original-n-021.jpg2024-09-25 15:39:13 UTC6151924Container for storage Metal construction Closed overall size 88" x 47" x 70" H Overall size open (13 feet L to R) by 4 foot 6" front to Back Left side usable space inside dimension 49" Left to right x 56"h x 20" depth to wall Center usable space 44" L. to R. x 56"h x 39 depth Right side usable space inside dimension 49" Left to right x 56"h x 20" depth to wall Estimated weight 1200 lbs Equipped With: Hinges to keep doors close. Steel handles for opening / closing 7 shelves total 12- 4 " Heavy duty Polyurethane Swivel Caster'sToolroom & General MachineryMaterial Handlingused3400-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151924-used-3400-560-portable-storage-container-metal-constructionhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bebbd8618cfe03b49c5e4b6fc0ddfc29/original-9-e1470663421264.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb86110e5df8bcf1374eb3ac85e4f52d/original-0341-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a45314bb72c18c2fc4bcc9435ba554b/original-0332-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7cb5b9ca24f27d7ef7c455abd29e420/original-0322-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f4895de70e7a8d85f2807d2bc6a9c18/original-0271-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d2daeb23df1933786f295ae45d3652d/original-0282-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/927a781a5f59c41bdea9c38dce4fb684/original-0312-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbc57094b197d344ca0d69f67a8a1afc/original-0263-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fd6d3f4eece1d674c7e7eb71e74770e/original-025-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa74b7b89b02600756675d7597782d1c/original-0242-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5234f53daddcbb6d9a1cb927b4ba9fc/original-0211-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75f31810858efbd3fbc748333a216684/original-022-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb0c7edbe3d6408a8d1c6daa1aa11abb/original-0231-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f8a3b076132374ef3bd1f7e407ec95c/original-0201-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49c8e8719a11b0cdab57cea3a0cc891e/original-0191-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70e3afdb0157c1f8334a691a8367f050/original-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99161cb31252d4c87fe52630b2c3f771/original-017-1024x768.jpg2024-09-25 15:39:18 UTC6151925Serial Number 1995 5" center height Screw mandrel, Brass pulley with standard six row division plate Star nut Screw barrel tailstock Ornamental slide rest Index point and spring Treadle gear Double mahogany frame Shepherd's crook overhead drive for cutting frames Equipped With: 6 - metal spring chucks with tapered nose for transfer chuck 4 - cup chucks, wood screw worm chuck, tailstock drilling pad, 2-slide die chuck, running center chuck with carrier, hollow screw chuck, four prong chucks 2 - tapered square socket chucks Hand rest with 3-tees, boring collar attachment, wrenches Spiral apparatus with complete set of change gears, banjo, spiral chuck, surface spiral apparatus Universal cutting frame, vertical cutting frame, eccentric cutting frame, internal cutting frame, curvilinear apparatus, fluting stops, standard set of six threading hobs. Eccentric chuck, oval chuck and ring, transfer chuck for each What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/ Additional Photos:Toolroom & General MachineryEngine and Ornamental Turning Machinesused6947-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151925-used-6947-385-antique-holtzapffel-ornamental-turning-lathe-circa-1860-shttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df62a996e8b40f212d5c918feb49261c/original-6947.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a2a8e4456bca5f8c06e759897ffc45e/original-6947-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04af5837fae114077fbffb0820193cf2/original-6947-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d998b7dbfa45762c83d74f50b98a3127/original-6947-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/429359ecdf2ca7ffdb39356a10e73e6b/original-6947-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ae85d12bfb26c24a08738604e08a2d1/original-6947-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b50bac7751ed0c3fb25bb73fcedfdec1/original-6947-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/647118200f0e24fa9e739d32de445e19/original-6947-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40d159ee399fd80a7f9e5f5d70bbda7c/original-6947-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b375a337f45f145eb7140d5ebdc2026/original-6947-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34847708a9afdb2db126b1f5a32cb67e/original-6947-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c712b53927164c40b7e6086a163a0f92/original-6947-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1201202c3f637100c31d0bf2fed79b53/original-6947-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ca68b170cb5ea2acef1ea9616958b4c/original-6947-1.jpg2024-09-25 15:38:39 UTC6151926220V/3PH/60HZ Equipped With: Lever 5C collet closer with pneumatic assist 6-station turret with pneumatic assist Cabinet stand Additional Photos:Toolroom & General MachineryLathesused6844-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6151926-used-feeler-model-fts-27-secondary-operation-lathe230 - 3500 RPM (variable)1-1/16"36"9"3-3/4"4"5/8"3 gallons74" x 35" x 68" high1,000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dca5baa018e2263088ed9a1344d1c8d6/original-6844.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7974917d812a997ba070c95c951c6a7b/original-6844-2.JPG2024-11-06 15:54:26 UTC6151927Dresses two angles tangent to a radius in one continuous motion with ,0001" accuracy Equipped With: Removable "G" micrometer base Sold less diamond toolToolroom & General MachineryTool Room Equipment & Accessoriesused1491-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151927-used-1491-700-j-s-fluidmotion-radii-angle-wheel-dresser-for-tool-cutter-universal-surface-grinders-model-rfg-501/32" to 1-1/2"0" - 1-1/2"7"1-1/4"5"3-3/16" x 4"6-1/4" x 4-1/4" x 6-3/4" high11 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41ce92c0762a1f63e509d692a1712e47/original-1491-1-main-e1429726126955.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d65aa5680a6e8952ab28597352f4c2e/original-1491-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f34cb4005c9c13f63d0f4bda470697d/original-1491-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82fcc6645c05edc410bb22d6f1ed26a5/original-1491-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e84c4b27d97b1abd5ce6739a1435ec7d/original-1491-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f3014b0b7b3e2cf5b254e277fafb52b/original-1491-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9fd20217b83fb43898710cdd9163b44/original-1491-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1794cde4269e5f352485d8bf7f6b1d17/original-1491-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa81f7cfdcebbdec4a27b4e3c6ba0d87/original-1491-7.jpg2024-09-25 15:39:12 UTC6151928Accepts 5c collets to 1-1/8" 36 - hole index plate in 10 deg. Increments Vernier on back plate calibrated every 1 degree Collet locks in position for accuracy under load 2-5/16" spindle travel for flute grinding Equipped With: 1 - 3/8" 5c collet For use on grinders, milling machines & layout workToolroom & General MachineryTool Room Equipment & Accessoriesused1435-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151928-used-1435-700-phase-ii-5c-indexing-spin-jig-fixture-model-24019-1/2" x 5" x 5-1/2" high15 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a34b03e23e0b66da400754b3b85c33d/original-1435-1-main-e1443796415780.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d189591f2052a73a1026a0a6e4f8633f/original-1435-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de07c0a45bad1e394a1f934279da492f/original-1435-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72d74bda135b3ba8687282a504e7a563/original-1435-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f9de46d8496a15ce365d016e3e377a2/original-1435-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63b4c58943a80229afb120ad032b655a/original-1435-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccbbf98247b10de18d2e9d8409ee1646/original-1435-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea8bffe33232ced27db8b20e135c626b/original-1435-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/748be2d35a47ae393a09c8a60881f3c9/original-1435-8.jpg2024-09-25 15:39:10 UTC61519296" by 4" Self Centering VISE Overall size 7" x 6" x 2 1/2" Max opening .25 " 2" diameter tapered mount Estimated weight 7 LBS Equipped With: Threaded holes for work holding mounting bracketsToolroom & General MachineryTool Room Equipment & Accessoriesused1856-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151929-used-1856-385-rare-antique-ornamental-engine-turning-work-holding-self-centering-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1a8a5012529f73bfcbf7d6b16341b1a/original-vise-001-e1444218043314.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5f6674e3c3c8fe0b96c2c710b45dfa6/original-vise-0011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67e239fcce96cdde0391ada6622492cb/original-vise-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa77cfce923b3abb0a2521f57a03b743/original-vise-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9709ee83018ea4e1073b2a6609c4584/original-vise-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b37dde354a6ef82625dc736995a6367/original-vise-006-1024x768.jpg2024-09-25 15:39:08 UTC6151930For storage of flammable liquids Equipped With: 2 - doors Additional Photos:Toolroom & General MachineryMaterial Handlingused7973-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151930-used-7973-700-just-rite-safety-cabinet43"(w) x 18"(d) x 65-1/2" high41"(w) x 16-1/2"(d) x 62" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6c07dd3b774e018d48f6b3ae16d40cb/original-7973.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/731666f0328d8492fa23724a72350405/original-7973-1.jpg2024-09-25 15:39:10 UTC6151931115V/1PH/60HZ Capacity to cut up to .065 scrapToolroom & General MachineryMetal Workingused5293-570Pawtucket, RIhttps://www.goldmachinery.com/listings/6151931-used-5293-570-star-model-3-scrap-chopper-with-capacity-to-cut-up-to-065-scrap1/3 HP20" x 11" x 37" high60 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/573f83c7b9340e4686442a4276c2bc7a/original-IMG_0301-e1698757157823.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6f29dc0c9ab6b0f965dcd9a55530d91/original-IMG_0306-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e762e68d4561c748cddf7f27cf916e63/original-IMG_0301-1-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/230daca4013dcbabe2575d136e099ba1/original-IMG_0302-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/509d11938e9ac077a43a6a3b75f5f245/original-IMG_0303-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3e14b5c0adebcee059a385a8a2ece90/original-IMG_0304-576x1024.jpg2024-09-25 15:39:12 UTC61519321954220-440V/3PH/60HZ Equipped With: Manual roll adjustmentToolroom & General MachineryMetal Workingused0565-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6151932-used-0565-580-littell-8-stock-straightener-model-3081 HP.041" x 8" wide/ .061" x 4" wide2 over 3 rolls2-1/4"8-1/2"yes3-1/4"10 - 60 IPM40"36" x 24" x 42" high1200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5cd167edf53804c0359c19c5ac63201/original-0565-003-e1403608874908.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fa4e7cb88c3ec52eb05a71dadc5ec90/original-0565-011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af1dcbc1510c461623170ca337a9d4dc/original-0565-012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8efa8a58fbea1a595664d7678ad93a3e/original-0565-013-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8d90f9eb47e87ee09dc59d0001e7490/original-0565-0031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f20f7c52bdf30d2f7805743b15ff2a85/original-0565-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/119a8d36519bdbd214fbef2e789a86b1/original-0565-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a30791a5a105dd8058456cebb7c20cf2/original-0565-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4349d8571a3104addd0b99a168b4fcb9/original-0565-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2c962e2841a5486a2274cc83269f577/original-0565-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8020927422e4c4b13a32d87dd7c546d8/original-0565-010-1024x768.jpg2024-09-25 15:39:18 UTC6151933Used Galvanized Steel Matting For Industrial Use in Plating, Tumbling or Other Wet Floor Environments Technical Data: Approximately 10 pieces 80' Long All Together x 36" Wide x ½" High x 1" Square HolesToolroom & General MachineryMaterial Handlingused0389-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151933-used-0389-used-galvanized-steel-mattinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba16e307c3ec8321415120872369a87b/original-0389.jpg2024-09-25 15:39:10 UTC6151934Equipped With: 2 - doors Used to store flammable liquids Additional Photos:Toolroom & General MachineryMaterial Handlingused8124-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151934-used-8124-700-wilray-safety-cabinet39"(w) x 40"(d) x 77"(h)37"(w) x 38"(d) x 73"(h)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d98e89924df23e7d9d91543bada5c06/original-8124.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3314aa0b516ceb18a0737f985b7d6579/original-8124-1.jpg2024-09-25 15:39:10 UTC61519351980220V/3PH/60HZ Equipped With: 4" head riser block Quick Switch II collet holder with (10) collets​ One shot lubrication systemToolroom & General MachineryMillers, Verticalused12BR2111842322-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151935-used-2322-470-bridgeport-series-1-variable-speed-2hp-ram-type-vertical-turret-milling-machine-model-br2j9" x 42"12" x 30"16"60 - 4200 RPM, variable2 HP5"0 - 18-1/2"/0-22-1/2" with riser block6-1/4" - 18-3/4"300 lbs.76" x 63" x  82" high2180 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/780ad2a8c10ac13be2eae0531a8dd86e/original-IMG_0328-e1480955804124.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/143f7ca2397627941ba8326e59b00b86/original-IMG_0334.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d665c48074f46d25ac7165e2c97abac2/original-IMG_0335.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adec3700834eac10ccc9e15ace4092cd/original-IMG_03281.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/528decc2d6bbf56eedbe45824420f97d/original-IMG_0329-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/524b0b518acfa54a9b9d52faf8d0182b/original-IMG_0330.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b7b1a34de0f0c149cfebbc392c891fe/original-IMG_0331-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69d6a7c49468f851638eb67f7c6f7ad9/original-IMG_0332-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8e57d52636ef5567f23209fe91e2ea2/original-IMG_0333.jpg2024-09-25 15:39:20 UTC61519371980220V/3PH/60HZ Equipped With: 4" head riser block Vise Quick Switch II tool collet holder with (10) collets Servo longitudinal table power feed One shot lubrication systemToolroom & General MachineryMillers, Verticalused12BR2111912323-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151937-used-2323-470-bridgeport-series-1-variable-speed-2hp-ram-type-vertical-turret-milling-machine-model-br2j9" x 42"12" x 30"(12" x 26" power feed)16"60 - 4200 RPM, variable2 HP5"0 - 18-1/2"/0-22-1/2 with riser block6-1/4" - 18-3/4"300 lbs.76" x 63" x 82" high2180 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30fbadf88df6f9894cbf193b19693e8e/original-IMG_0321-e1480956010666.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67a415956d25e6fbd26b726cede4fe8f/original-IMG_0327-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fddf6cdcd3f7f51fbb0c7f6a234d5e2/original-IMG_03211.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17d63bbf89815352b5b0e09f42091234/original-IMG_0322.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d554844103e697bf9d047acda151ef7/original-IMG_0323.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd934345565608fd25ab6f919673ecc6/original-IMG_0324.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a4058860a2446f37a474d31a80959a5/original-IMG_0325-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/818a622e86cfb7e3f9d7053ac047bee4/original-IMG_0326.jpg2024-09-25 15:39:19 UTC6151938Set consists of: 1 - cam 2 - feed rolls 1 - wire guide 2 - cutters Tooling used to make .027" bullet nose earring posts Recently removed from a model D2 Escomatic Automatic Screw Machine Condition - excellent, shows little use. ...for jewelry bullet nose earring post making .027" DIAMETER POST Jewelry standard. ...use with gold, silver, other wire.Toolroom & General MachineryTool Room Equipment & Accessoriesused0630-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6151938-used-0630-400-tooling-for-escomatic-swiss-screw-machine-for-jewelry-earring-post-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6544abb07f27217d8f34a0ed99d26946/original-esco-1-e1397089004644.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a470bd2fa2d499b4edc57e626f99b992/original-esco-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/439573820dc324f4eb8cc2b770580fa6/original-esco-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7e41418205a0f82f976dff4ca795192/original-esco-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e9846fdc8fb7e9f451cdf37574c5e65/original-esco-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b38f86b039ffdb932c5bfeb323bcb8cd/original-esco-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3f40f8843d06163d8c97547c7c7b862/original-esco-11.jpg2024-09-25 15:39:10 UTC6151939The Verifier H.R. Series X-Ray Inspection Systems New replacement cost $65K USD Voltage 110/220 50/60cycle 1PH Date of MFG 12/2011 Model FX090D S/N 5139 Calibrated 10/25/22 valid until 10/26/23 16X18-inch maximum board handling CE certified and exceeds all CDRH and FDA safety and radiation requirement Equipped With: Hand operated table rotation, fixture 90kV, 5 micron spherical focal spot size Dual 4/2-inch Image Intensifier 650X magnification provides excellent imaging About The Verifier HR is a portable high-resolution; high-magnification x-ray system designed to address a broad range of failure analysis, quality inspection and measurement applications.The 90-kV H90 system suits applications with dense or thick materials, or that require finer-detail resolution and higher magnification. Both use a four-axis, 360° sample manipulator. The X-ray inspection systems perform manufacturing quality assessments and defect detection for components and assemblies, such as automotive sensors, castings, electronic modules, electromechanical devices, finished medical assemblies like pacemakers, and other mission-critical devices. "X-ray technology continues to be a valuable inspection tool for new packaging technology design and development by providing critical prototype validation, quality assurance and measurement data "X-ray inspection has the advantage of being non-destructive and will provide information about the condition of the part during proto-design, post burn-in and after any environmental testing. Note offered less CPU About FocalSpot, Inc. FocalSpot, Inc. is a premier provider of SMT Inspection and Rework equipment for the electronics manufacturing industry. FocalSpot designs, manufactures and markets affordable X-Ray Inspection Systems (worldwide) and exclusively distributes DEN-ON advanced lead-free rework solutionsToolroom & General MachineryMiscellaneous Machineryused5951-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151939-used-focal-spot-verifier-hr-fxs090d-x-ray-portable-inspection-system-new-2011Portable, 32 x 34" (813 x 864mm) easily rolled where neededhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/495027d8a5af4a4d1c5583ba3901da4b/original-IMG_7087-e1678291285804.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/340ff0154b73ecfcec0b58247ef59c07/original-IMG_7096-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3edde35653b44a65178f52e389b03109/original-IMG_7097-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3985120a473859445f95708c454f215d/original-IMG_7098-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/046e76ac47065a621dc3c99e8354e875/original-IMG_7099-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97b4a10055d20eb727512443fd1df81f/original-IMG_7087-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd195cfcb83aaacb98c15b2fe241ab82/original-IMG_7088-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a8cfbae9a4d62cd8dffa7cab1df575b/original-IMG_7089-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b353cc33433d07154906926d1d183fc9/original-IMG_7090-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0728aa7cafc6da31d8009388e9623915/original-IMG_7091-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3445cc410fe762888b8463a3a883c187/original-IMG_7092-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a8090013c8fe25b1bc89ad4da27d4b6/original-IMG_7093-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a09a7e06f4387d9ae2b3bcb6d5cdb1d/original-IMG_7095-768x1024.jpg2024-11-18 14:26:01 UTC6151940JetEstimated weight 75 LBS Note Stand onlyToolroom & General MachineryMiscellaneous Machineryused5921-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151940-used-5921-700-jet-tools-stand-for-disc-belt-sander-6-x48-12-model-jsg-6s-new-open-boxWood WorkingJETAccessories / Tools / MachinerySandershttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55c9aee4d9cb1c995cb7571241a604ec/original-IMG_8202-e1693314936705.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a73017b11b3bf0ea63cf229f6e7f116/original-IMG_8214-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ced46e069727006b9121780b30dc08d1/original-IMG_8201-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb02785e4440ec119c385eb1a87fa448/original-IMG_8202-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32f86552f921c73d5cfced84c76817c6/original-IMG_8203-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c9b606112c5ae994ede0436a780cc22/original-IMG_8204-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f0e1165b774dfd617b8c2e1383f1499/original-IMG_8205-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/038c99355b5d32cb1d710a3abc88ccc6/original-IMG_8206-1024x768.jpg2024-09-25 15:39:23 UTC6151941Roland JWX-30 Voltage 110v 1ph 50/60 hz Working area 305 x 205 mm Z stroke 100 mm Dimensions 606 x 656 x 557 mm Weight 47 kg Complete jewelry model making solution Powerful, precise 4-axis mill Fixtures included Compact, fully-enclosed Roland JewelStudio design software Integrated fixtures included Double-edged tool yields fine detail Compact, fully enclosed device High-speed (30,000 rpm spindle) Fine precision (0.00125 mm/step) Imagine. Design. Create. It’s just that easy with the Roland JWX-30 jewelry model maker. This complete jewelry model making solution comes complete with powerful design software that allows you to create detailed 3D models that clients can review from every angle. From these files, the 4‑axis desktop mill automatically produces intricate wax models of beautifully crafted rings, pendants, bracelets, brooches, earrings and cufflinks.Toolroom & General MachineryMiscellaneous Machineryused3419-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151941-used-3419-700-roland-jwx-30-jewelry-wax-model-maker-bench-top-3d-engraver-milling-machine305(W) x 205(D) x 100(H) mm, varies with fixturehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9389a5fc9c1f19b39af46c55543cfd7b/original-IMG_1331-e1712237318951.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e056ef54487af9bd41cd242060e1acc/original-IMG_1340-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3e5016c17ff459a018da3434ea867db/original-IMG_1341-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bc0455dec9db3ba8c2beea02be3ee76/original-IMG_1342-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf9e0a34339f0d2a3f2df1f4f0410861/original-IMG_1343-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/730cd19f5714d4dfc9d2ba483e1911f0/original-IMG_1344-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d443ee2ae30209995dec23c05767f9b/original-IMG_1345-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b08a21eba739897c1b446ef3d8f9f0fb/original-IMG_1331-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/215ea5c34c138930c2e90e4197ea19c0/original-IMG_1332-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a7bb78664cbba07c184b90baffd1e8a/original-IMG_1333-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1ef871f77942c0bb83214b2840c1d5d/original-IMG_1334-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/967367509758b26cf3140217f8524e71/original-IMG_1335-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7bb7bca6ad5a115161369d103c9979b/original-IMG_1336-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f6117540e6bc3e549434b391bece385/original-IMG_1337-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fed6ed084c3bdcd2546eaf8428c9842/original-IMG_1339-1024x768.jpg2024-09-25 15:39:26 UTC6151942LPG POWERED 2 STAGE MAST HEIGHT 2ND STAGE 128" Equipped With: SIDE SHIFTER SOLID RUBBER TIRES OPEN ROLL OVER PROTECTION SYSTEM DUAL SIGNAL LIGHTS ALERT LIGHT SYSTEMToolroom & General MachineryMaterial Handlingused2956-560Pawtucket, RIhttps://www.goldmachinery.com/listings/6151942-used-2956-560-komatsu-5000lb-capacity-ride-on-fork-lift-truck-model-255000 LB MAXIMUM42"24"85"6646https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f832fefd2c1d25aebf7c1b5694a04d0/original-2956-1-MAIN-e1548275251521.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1cf0758bd695880e7fd3ca7a99bbe50/original-2956-8-963x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d33558e33f9a4100e2580ea3f6828d6e/original-2956-9-692x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdc37913358bffdf647c922b23a6cb4f/original-2956-10-731x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7f7efbd56ddb7c89c0bc409e3c9e458/original-2956-11-806x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df32a47d046894ba0d2f22bbecd8aa3d/original-2956-1-MAIN-1-1009x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/369bdf63963c13aaeaeaffd86809a75e/original-2956-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d3a6438704e0aaf394a87f56b14ba73/original-2956-3-781x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37bb334a3bb3bd5100e711e7c5c37a9e/original-2956-4-848x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57c8a9254922c3f3c6d3cf331aaf7c9a/original-2956-5-1024x1013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b0fe81e0ce4da0c2f47285dea175427/original-2956-6-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a51eb3b92fc34a22fd4a090167d70fc/original-2956-7-670x1024.jpg2024-09-25 15:39:14 UTC6151944110 volt 1ph 50/60 cycle .6" Width 0.125" Thick Capacity Motor RPM 1725 Equipped With: Heavy duty steel stand with Caster wheels Winsmith speed reducer model 4ctToolroom & General MachineryMetal Workingused5294-570Pawtucket, RIhttps://www.goldmachinery.com/listings/6151944-used-5294-570-durant-tool-model-6-scrap-chopper-with-capacity-to-cut-125-scrap36" x 36" x 35"125 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a9a6b09238ccb19fbda72900f1022a2/original-IMG_0308-e1698756371930.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a7a1ac2f04c329ba86ec6deaf9c0f9a/original-IMG_0313-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2e15281e81b6858e1ff1c5054026584/original-IMG_0314-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3621843e922705c234a5fccb311532ff/original-IMG_0307-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b016115e8ff8f6e79e6545a7541f4b0b/original-IMG_0308-1-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ba27a5a720f136183c4fdfd6ab1e29a/original-IMG_0309-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4e09f7463b9e3829a1c2ee771792efa/original-IMG_0310-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83c46cda5dc6c14f4e36ae0716fc4ef4/original-IMG_0311-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f95080caed2151630b8de2c84816f4d/original-IMG_0312-576x1024.jpg2024-09-25 15:39:14 UTC6151946440V/3PH/60HZ S/N SC 202066Toolroom & General MachineryMetal Workingused3547-570Pawtucket, RIhttps://www.goldmachinery.com/listings/6151946-used-3547-570-cooper-weymouth-6-motorized-scrap-chopper-type-sc-6-x1-16-capacity6".062"(1/16")1 HP190 strokes per minute23" x 17" x 44" high190 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1047c1810020521395b7dbdb7041073/original-IMG_3450-e1632403113107.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11150142caad3e72b5eb102bd75d6cc5/original-IMG_3457-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/385baba94fbb5994a56044c252ebe934/original-IMG_3458-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/744cc3e3293f89fac9b8ec3ed5612adc/original-IMG_3450-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaf1351db0992e131e6a5177ac00b89b/original-IMG_3451-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc6f40ef6178b4f414a7f066e21adba1/original-IMG_3453-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c35eccecef8a1da520d82c6005982f64/original-IMG_3454-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3911653e605fb9c0409ed4585c8c6485/original-IMG_3455-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/840c934d69ef84e143a2484b8f08c79a/original-IMG_3456-768x1024.jpg2024-09-25 15:39:16 UTC6151947Black granite construction Tool room grade B No ledge Equipped With: Wood storage caseToolroom & General MachineryMiscellaneous Machineryused1193-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151947-used-1193-700-ottavina-metroplate-12-x-18-surface-plate.0001"/.0025 mm81 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f791a4e84178dee603d98f3f6aebdcb/original-IMG_7028-e1590679781129.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31bfd21874efa7f5d88d3f42e6db5e80/original-IMG_7028-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7836557542c7b2fa32bfef93f2f7ada4/original-IMG_7029-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02639001df22d911626205f2ab6887f9/original-IMG_7030-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93bc2183193b4114c4836354ece5d8c5/original-IMG_7031-768x1024.jpg2024-09-25 15:39:23 UTC61519483 PRINTERS AVAILABLE Ex-Works, NJToolroom & General MachineryMiscellaneous Machineryused2995-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151948-used-2996-700-tiger-model-3dp-hd-3d-printers-3-availableLI90YA1741ADAT0003, LI90YA1741ADAT0004, LI90YA1741ADAT000580 x 45 x 12041.5um405um50 to 86°F40% to 60%Windows 7, Windows 8, Windows 10Google Chrome.STL, .SLC, .ZIP(PNG), .CWS, .WRK17 x 17 x 23 1/2″ 83-lbsEthernet Connection, USB (Direct Printing)100-240V AC, 2A 50/60HZ32" x 32" x 37-1/2"127.60 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ee7541245b54aaf396870c783095f2a/original-1-e1565352095433.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bb05c9a42892e18ebd8fc308e9e04fd/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/314df77ac0352496204b69be8035a319/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d4f42c03e21bbb5eda2bd3d82f993f8/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e93b529c543eee41419c798b59ab1c2a/original-3-768x1024.jpg2024-09-25 15:39:23 UTC6151949Heavy duty construction 4 - Orange cones with dual 9" white reflective collars for traffic control 2 - Pink cones for celebrations, children's festivities or cancer related events Dimensions:Toolroom & General MachineryMiscellaneous Machineryused3129-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151949-used-3129-700-lot-of-6-orange-pink-oversized-traffic-safety-cones60" orange/ 64" pink26"32" x 32" x 3-1/2" high63.5" orange/ 67" pink40 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d937ee235def729800e9013bf1fc48da/original-CONES-1-MAIN-e1557925451353.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/387d225584ad36f14910e0a26f37d924/original-CONES-6-1024x966.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e1980822ff11a6ce77b77c9fb1ca8f6/original-CONES-1-MAIN-1-865x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50a790ab3f39ce62f14fd1e3c9312411/original-CONES-2-532x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57661d5b76fde57b961fc22cda82e1af/original-CONES-3-504x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d9a48c8700081ec79c624647dd6cc8d/original-CONES-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb3b8329c2837557016e9de9b9b1cd04/original-CONES-5-1024x981.jpg2024-09-25 15:39:25 UTC6151950Digimatic E type Inch/Metric Equipped With: Built in LCD readout Inch/metric conversion Powered by 5R44 BatteryToolroom & General MachineryMiscellaneous Machineryused2713-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151950-used-2713-700-mitutoyo-12-heightmaster-digital-height-gage-model-515-3555" - 12".0001"/ 0.001mm.00005"+/- .0001"19"21 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe72ab632153a4b76fda67331b004e8e/original-024-e1525372201762.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/600af7684578a3acaa22ffceb5828966/original-027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/596d075c631f606958cb1993a4fbc6a9/original-024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03a78543b8ffe826251930c42dd31afc/original-025-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c3f4af8ef2b9b2da06b22f610de8fbe/original-026-768x1024.jpg2024-09-25 15:39:25 UTC61519514 - Pneumatic holders to hold work piece down over material to complete the screen printing process Equipped With: 38-miscellaneous screens ~ as seen & photographed Accu-Stretch Screen Stretching System Printing at higher, uniform tensions provides faster production speeds, improved registration, longer screen and squeegee life, more consistent ink deposits and lower ink usage. The patented Accu-Stretch provides these benefits while eliminating complicated stretching systems, training and expensive tools. Self-equalizing stretch clamps provide uniform tension while minimizing fabric waste by enabling you to stretch directly from the fabric bolt. The modular design enables Accu-Stretch to be expanded to virtually any size and width of fabric and frame materials. *The available sizes are the measurement of the inner area of the stretch supports, so you will want to choose a size that is slightly larger than the largest frame you will be using. Product Features Infinite screen tension adjustment throughout the entire printing area Substantially increased screen mesh tensions Accommodates all types of fabric: polyester, nylon, stainless steel and metalized polyester Total tension control Unique brace bar provides maximum prebowing of the frame Increased production through elevated precise tension levels Save fabric - stretch directly from bolt Reliable and accurate pneumatic design superior to any other method Operates on very low air pressure Maintenance free design throughout No assembly or mounting required Complete frame size adjustabilityToolroom & General MachineryMiscellaneous Machineryused9253-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151951-used-9253-700-accu-screen-pneumatically-operated-silk-screen-machine19-1/2" x 24"48" x 48" x 40" high150 lbs.easy to operate, no tools or training requiredwood, aluminum, steel, etc.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81ced1e9a0798344ccfe71cdf127e21a/original-12-e1502981643189.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a22a874d46ebd583a80933b0ee00595/original-051-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e2c8c8c053e00dd475f60ee73778b34/original-052-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23e9f558881ac8d0e03e6bfa487a39b8/original-053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31290d786494569fe08ba6c3a1d592bd/original-054-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60461d3d02115a2c0054768dad8cea32/original-056-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da3b116ca952fb3614d3a02298abb146/original-056_1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/050d7019cf45cac96eedfa4e1e891ae0/original-13-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49b49889fb99cda18de77d8af70b3332/original-045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4a4b74ac5f9b05c565715867cdc9e55/original-046-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5dd8b307ebf0bd2fbc913a4e5733c99e/original-047-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/479377a835f72d48d863d89a71cd105b/original-048-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c6cd33454f3ab15da5ab56b6d2f2799/original-049-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f28b460d3fb87371b3214aa03ae3634a/original-050-768x1024.jpg2024-09-25 15:39:32 UTC61519521998Scroll Down To See Video! 120V/1PH/60HZ This machine is perfect for the highest surface quality parallelism flatness, and precision on all types of metals, semi-conductors, glass, quartz, sapphire, ceramics, aluminum, oxides, silicon nitrides, zirconium and various special materialsToolroom & General MachineryMiscellaneous Machineryused2648-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6151952-used-2648-340-peter-wolters-lapping-machine-single-wheel-type-model-3r38015"0.75 KW , 1 HP0 - 80 RPM, variable3.5 liters24"(w) x 32"(d) x 20" (h)308 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab7ef32a73610d7587617a38f0ca5aca/original-046-e1525437737425.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98b3ce82a3fb13bc1a3defffa41088a1/original-050-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a9179824d1a17c4f8bb2dec64eecfc0/original-052-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08069ceb434b443541046d389715d042/original-053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84ea094decc65a4f73bee4d06e3bde5d/original-046-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bfe60cb21926837fc3b6626e0cc8725/original-047-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e445c23ad82b4274d1ab03712b2e746/original-048-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/521ed374f8948bfcc8256f4cbd99f26c/original-049-1024x768.jpg2024-09-25 15:39:26 UTC6151953The top of anvil is made of 1/4" of tooled steel Equipped With: Solid wrought iron body Tool steel face Heavy duty solid block standToolroom & General MachineryMetal Workingused8492-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151953-used-8492-385-rare-antique-trenton-anvil-wrought-iron-278lbs-s-n-a6148221"(l) x 4-1/2"(w)33"14"30"1-1/8" x 1-1/8"5/8"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99d3540f3cc60b7c24cc3c6824fb5a3b/original-IMG_6250-e1575648918145.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c5a2e4074e77717b39fabd608960c8b/original-IMG_6255-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d33421cddbbc710587c9471d5a585b6/original-IMG_6250-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82c114b70e5cc1c799861f7ab89a998e/original-IMG_6251-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1461433878b37d8e4751a7a82353405/original-IMG_6252-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5326cbbc7e1fd36b51c0e7a285154a1c/original-IMG_6254-768x1024.jpg2024-09-25 15:39:15 UTC6151954Romanoff International Supply Corporation has been in business since 1949, servicing the precious and semiprecious manufacturing industries. For more than a decade, Romanoff has provided 3D printing solutions to jewelers and designers worldwide. Gold Machinery & Romanoff proudly represents Tiger3D printers, the best high resolution and professional grade resin 3D printer in the market. Tiger3D printer is designed for jewelers. The most advanced high definition DLP 3D printer in the industry. Tiger3D Printers utilize DLP (Digital Light Projection) technology. This high resolution approach, combined with a state of the art proprietary optics system, will project an accurate and uniform image to the building platform. Out-of-this-World Surface Quality Tiger3D printers were designed with the smoothest surface quality in mind. Its uniquePLS (Protective Layering System) takes smoothness to the next level. PLS combined with proprietary Floating Glass Technology (FGT) ensures the perfect ratio between smoothness, extreme high resolution and speed. High Definition True high definition. The most advanced 3D printing DLP system in the industry. Tiger3D printers set the standard for DLP high resolution. Its high-end LED DLP projector and proprietary technologies (PLS/FGT) provide the best resolution, requires less supports and improves accuracy. Period. Casting Stability Tiger3D printing resins are formulated to provide clean burnout and casting stability. Whether you cast one custom piece or need large production, Tiger3D materials will meet and exceed your quality expectations. 1 Year Warranty Tiger3D XXL..... $12,995.00 Tiger3D XL........ $9,995.00 Tiger3D HD........ $9,995.00 Tiger3D XHD...... $9,995.00 Tiger3D Burgundy Resin.... $359.90 Tiger3D Teflon Tank.... $139.95 Shipping & Handling for 1 Unit... $399.99Toolroom & General MachineryMiscellaneous MachinerynewGoldPro Tiger PrintersPawtucket, RIhttps://www.goldmachinery.com/listings/6151954-new-goldpro-tiger-3d-printers-for-jewelry-research-developmentAs fine as 30 Um5 to 100 Um layer thicknessUp to 150 x 84.4 x 120 mmUp to 65 Rings @ 3 HoursCastable and all purpose materials0-30 DaysEx-Factory, NY USAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/358aa0f66da6f166cecdfc07f2f96e93/original-tiger-3d_mockup_HD-600px-e1522759736743.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bf20ddc589ba74637dffc960c37c8c2/original-3dprint.jpg2024-09-25 15:39:24 UTC6151955Item 0873 700 - Used Protechnik Model KBM400 14 Straightline Chamfering for Chamfering: Carbon Steel, Stainless Steel, Aluminum & Plastic, 1500-6000rpm, 110 Volt, 1 PhaseToolroom & General MachineryMiscellaneous Machineryused0873-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151955-used-0873-700-protechnik-model-kbm400https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/621c8b7213bb81819dc8363f9c3908ab/original-0873.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3d2d48dbbbd803979400e76ca4a0466/original-IMG_1561-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/119d66f5cea2c3e2397b145fbd9e1dd6/original-IMG_1566-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e574049528b230c2c858300b8b36c9e/original-IMG_1575-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54485ead6762307164516be4ba84c773/original-IMG_1576-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7c8a858bae53b2276d76a0d42da6033/original-IMG_1552-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28963a324bdc16dfd25eff223d57a128/original-IMG_1553-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f00dda7ff375ed127bfeb54fc604da6e/original-IMG_1554-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/414ad95d92f086c3cbef2370b722505e/original-IMG_1556-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b3e1a0fcab88def3a4c278ae3e76390/original-IMG_1560-768x1024.jpg2024-09-25 15:39:31 UTC6151956EnvisionTECPerfactory 4Scroll Down To See Video! VOLTAGE 110V 1PH 50/60 CYCLE Process Vat photopolymerization (VPP) About section Perfactory® Perfactory® 4 Mini XL with ERM EnvisionTEC’s Perfactory 4 Mini XL with ERM is a low cost, easy maintenance and user friendly 3D rapid prototype manufacturing system. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the Perfactory 4 Mini XL produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional. Machine Properties * Perfactory® 4 Mini XL with ERM Lens System Lens f = 2.36” (60 mm) Lens f = 2.95” (75 mm) Build Envelope (Factory Adjustable at Time of Order) 4.5” x 2.8” x 8.66” (115 x 72 x 220 mm) 3.3” x 2.1” x 8.66” (84 x 52.5 x 220 mm) Projector Resolution 1920 x 1200 Pixels Native Pixel Size 0.0023” (60 µm) 0.0017” (44 µm) Pixel Size With ERM 0.0012” (30 µm) 0.0009” (22 µm) Dynamic Voxel Resolution in Z (User Adjustable and Material Dependent)** 0.0006” (15 µm) to 0.006 (150 µm) Data Handling STL Warranty 1 Year Included * Specifications are subject to change without notice. ** A voxel is a volumetric pixel. Materials Available Ideal for ABStuff, ABflex General purpose similar to ABS plastic ABS Flex (Requires factory fitted UV Option to use these materials) General purpose similar to ABS plastic with flexible characteristics EC500, EC3000 Casting HTM Series High temperature molding, architectural models, plating LS600, EC1000, WIC100G, WIC300, E-Shell® 200 General purpose Photosilver High temperature applications with fine detail PIC 100, EPIC Casting R5, R5 Gray, R11 General purpose, master models RCP30, RC31, RC70, RC90 High temperature applications System Properties » Build speed in constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness » Economic material use with no vat » Very few moving parts and minimal consumable components make the system user serviceable » Changeover between materials is quick and easy Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm) Weight: 188 lbs (85 kg) Electrical Requirements: 100-120V, 5.4 Amps, 220-240V, 2.4 Amps Patents Pending.Toolroom & General MachineryMiscellaneous Machineryused3930-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151956-used-3930-700-envisiontec-perfactory-4-mini-xl-3d-printer-new-2007Germany140 × 105 × 230 mm3.38 L0.05 mm0.1 mmLED light > Digital Light Processing (DLP)ResinPolymers, Thermosets, Photopolymers730 × 480 × 1350 mm70 kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f895a0faabc34a5660e42c48ff8a4fd9/original-IMG_2221-e1723047421607.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96bf1f9a828b5dc43b6dd15bc0cca677/original-IMG_2219-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a33b7b3bddb12bc3042458cdc007791/original-IMG_2220-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/293976b635a9eea65e8560b9c9ecc50d/original-IMG_2221-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d21d0fdec01cedc6ceb145f598d0b53/original-IMG_2212-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74dc6bbfa1bbf9572fc00e9f3db11ea1/original-IMG_2213-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c5f6742010da3b3d00e1d7e1a633f6c/original-IMG_2214-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/654388b247b12856e1e51cbcb9c9b639/original-IMG_2215-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/309cfd285d2d2dd21246b802b83a0794/original-IMG_2216-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2b461a76bbe3580d4c02d1670f0e578/original-IMG_2217-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc81935d8fbd43dd48556d1a41506e9c/original-IMG_2218-768x1024.jpg2024-09-25 15:39:24 UTC6151957208V/3PH/60HZ SERIAL # C7186Toolroom & General MachineryMiscellaneous Machineryused2976-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151957-used-2967-700-busch-tank-mounted-3hp-vacuum-pump-model-063-1381580 GALLON HORIZONTAL4165" X 30" X 44" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3e61458790c6f977180b5511721a327/original-2967-1-MAIN-e1550152574477.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6402cbfdb4cf5c6ff9c4a166715b9a76/original-2967-1-MAIN-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69312c7c0df7332012d953931e05153c/original-2967-2-1024x678.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13ad5c23fd5ac143ddea641e20111e7f/original-2967-3-1024x817.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc918106784e9593737cc66c309ef117/original-2967-4-1024x887.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d7464dcb05e6807aeabf82b815f1560/original-2967-5-768x1024.jpg2024-09-25 15:39:25 UTC6151959220V/3PH/60HZ Spindle Type R8 Equipped With: 7 Assorted - R8 Collets Work light Power table feedToolroom & General MachineryMillers, Verticalused5918-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151959-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine9" x 32"20"12"16"80 - 2720 RPM (8)1 HP5"0 - 18-1/2"6-1/4" - 18-3/4"300 lbs.76" x 63" x 77" high2130 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68517f36547cf859cb21ee8fe77f98f2/original-IMG_2264-e1721227249877.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18dc25efb50e108de669dbb9a6dabb08/original-IMG_2265-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b0252d868eac88df59f89509c15c35e/original-IMG_2262-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99beee7944bce6d219425a04ea775dd4/original-IMG_2263-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8dda651722522a7250af05d5a4ad6cf0/original-IMG_2264-768x1024.jpg2024-11-06 15:55:56 UTC61519601981Scroll Down To See Video! 110V/1PH/60HZ For pipe and bolt threading 1/4" - 2" bolts & rods NC/NF Right hand/left hand threading Universal adjustable dies with the following sizes: 1/8" - 3/4" NPT 1" - 2" NPT For bolts and rods: 1/4" - 20 UNC 1/2" - 13 UNC Equipped With: Mobile heavy duty stand with casters Foot pedal activation Reamer attachment Swing down cutoff attachment Self-Contained Through-the-Head Oil System with Adjustable Flow Control and Integral Oil Reservoir 4 PIPE THREADING HEADs, QUICK-OPENING https://cloudfront.zoro.com/product/full/Z1L_vxfo5oy.JPG MANUFACTURER'S WEBSITE: https://www.ridgid.com/us/en/ridgid-partsToolroom & General MachineryMiscellaneous Machineryused2550-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151960-used-2550-700-ridgid-automatic-pipe-threading-machine-model-8011/8" - 2" NPT pipe1/2 HP1/4 - 3/8" NPT44" x 24" x 48" high350 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a910e4464add3114d9ff8ccd3f215080/original-2550-1-MAIN-e1503685570504.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f12df35b3f5fa851d73a323f5350b74/original-2550-7-877x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91f077f517b20889f3b5b83798b97041/original-2550-8-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e5ea70ed0f1fe25c9f0f652477818c9/original-2550-9-1024x699.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40f0b7eafe2ceded378baf50d0fe2374/original-2550-10-914x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e81b6875d30c5ab7b64e1cc1acd44427/original-2550-1-MAIN1-1024x930.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ddaf614c804cc7a9c1bae78ad99d49d/original-2550-2-961x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/930c9f216985d3d94cc4b8bdee43f86e/original-2550-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc20f9bdd23de6d1fffdfde627647c4c/original-2550-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de326fb6580e3a948f74b358b66b126a/original-2550-5-912x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b2f4227acb8cb210440a38c168bc6b2/original-2550-6-768x1024.jpg2024-09-25 15:39:31 UTC6151961118V/1PH/60HZ Vertical projection type 20X lens magnification Equipped With: Surface illuminationToolroom & General MachineryOptical Comparatorsused0462-530Pawtucket, RIhttps://www.goldmachinery.com/listings/6151961-used-0462-530-jones-lamson-14-floor-model-optical-comparator-model-topic-14-s-n-e532275" x 16"4" x 6"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7553c02c382c2885fc5880f8e5086f3c/original-l-002-e1379508909543.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f48c0441373c233063cc7f714a36b1dd/original-l-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ae340951b48d532b52adc56917062f8/original-l-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfe95946cf14997958dd96d887ba6e28/original-l-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98fbef11866854cb4a404437e1601121/original-l-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c3603af017506abe64e628c7513b518/original-l-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56ed44dac9bdb166ee55dec93a40098a/original-l-007-1024x768.jpg2024-09-25 15:39:31 UTC61519621973230V/3PH/60HZ Equipped With: Collet holderToolroom & General MachineryMillers, Verticalused12BR1501931011-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151962-used-1011-470-bridgeport-1-1-2-hp-vertical-ram-type-turret-milling-machine-model-br2j9" x 48"16"6-3/4" x 18-3/4"" 5"R83/4"manual/ 3/8" power feed1-1/2 HP60 - 4200 RPM, infinitely variable.0015"/ .003"/ .006" rev.82"(w) x 63"(d) x 78" high2130 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efc7be22b23a7a0a556f17c5449bd6ac/original-IMG_0381.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/defa8dc97069e968a267e8bac3d386bf/original-IMG_0381-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a02c85d1e6a18b32e1c9a5115c4f8dc2/original-IMG_0382-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcd44b903796fdec1b754edf7fc1f849/original-IMG_0383-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/62502885ce1ebbc564b43c30c92509ee/original-IMG_0384-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9139139ab5aa41e3aaf1514d7edc24a4/original-IMG_0385-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d04a3927db2e70190778640aca509953/original-IMG_0386-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aea9737c45d10f6e73622fbf4497fbde/original-IMG_0387-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/727e8c3e6dcf381f47e9af6bf9a4627b/original-IMG_0388-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb993c3af954f4d44a9a894c44455445/original-IMG_0389-768x1024.jpg2024-09-25 15:39:21 UTC6151963230V/3PH/60HZ Built 1970 Equipped With: BRIDGEPORT POWER FEED TO TABLEToolroom & General MachineryMillers, Verticalused12BR1374950342-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151963-used-0342-470-bridgeport-model-br2j-variable-speed-vertical-turret-milling-machine9" x 42"30"12"16"0 - 18"6-3/4" minimum to 18-3/4" maximumR8 taper3/4" manual/ 3/8" power feed5"60 - 4200 RPM (variable)76"(w) x 63"(d) x 77.5" high2130 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4fbb894c5608c5abe15d741d3a9b257/original-012-e1375882470624.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c017f997c2b23a5335bc02a13214ec7/original-0081-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d328d0ecaedba0977f1cd2e5a9613e3/original-0091-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b36ebd8b42ce4a652914bb549092c200/original-0101-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08ec68dd6e9743e88a8986550c1e6333/original-0111-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7fced7b28ef1f24ff4fbe70f3b37d92b/original-0121-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5882dd054c6a19d99145e455f5a01019/original-013-1024x768.jpg2024-09-25 15:39:20 UTC6151964Scroll Down To See Video! 30 TON STRIPPIT SEMI-AUTOMATIC FABRICATOR MODEL SUPER 30/30 S/N 1194421 Year 1964 Cat.# 62000 230 Volt 3ph 60 cycle Equipped With: REMOTE FOOT SWITCH Adjustable Press bed Original owners manual Back gauge with direct read counter and dial. Read inches and tenths on counter (Qty 3) QUICK CHANGE TOOL HOLDERS Punch tooling as photographed Notching tooling as photographedToolroom & General MachineryMetal Workingused6755-570Pawtucket, RIhttps://www.goldmachinery.com/listings/6151964-used-strippit-fabricator-super-30-x-30-ton-semi-automatic-punch-press-with-tooling30 TON30"3.5" DIA. IN 12 GA.1" DIA. IN .25072" W X 48" D30" X 30"5/8"1651 HP6,500 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bc9037957a331a1df291090e841b27e/original-IMG_5345-e1655408259982.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b902b64b7bbe4711c386446133fe4c7/original-IMG_5351-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9aa9dd7e1cdf3c0f970fc389440bcf22/original-IMG_5345-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50da85953c01bce396e68f8235f2eaaa/original-IMG_5346-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5aa7b5dcbdb35ce179b361e166fc156f/original-IMG_5347-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2b8c8650336876d686572b8226adcd5/original-IMG_5348-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05ca7d3b168d183ec6793e46ae667edd/original-IMG_5349-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b88d27e832a0b9b22e906f680973eac1/original-IMG_5350-768x1024.jpg2024-11-06 15:55:46 UTC61519651 - Richmond Solarbeam Self Contained Screen Maker, Model 3000 FM 220V/3PH/60HZ Focused 3000, UVA tri-metal halide point light source Fast & automaic complete vacuum & exposure cycle Light Integrator(standard) stores 30 exposure programs High pressure vacuum Textured, UV inhibited deep draw rubber blanket with pure gum elasticity High output instant power shuttered lamps produce perfect screen fast Microprocessor controlled photocell delivers precise exposure 3/8" optically clear float glass High gauge welded steel construction FDA approved lamp-safe emissions & safe to handle without gloves 1 - Accu-Screen Pneumatically Operated Silk Screen Machine 4 - Pneumatic holders to hold work piece down over material to complete the screen printing process Equipped with: 38-miscellaneous screens as per attached photos 2 - Auto Roll Pad Printing Machines Model Micronic 100, 120V/1PH/60HZ Equipped with: Dual hand controls Oval pressure gaugesToolroom & General MachineryMiscellaneous Machineryused1374-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151965-used-1374-700-silk-screen-printing-manufacturing-package-consisting-of-machines-and-accessories700 lbs.38" x 44" x 60" high19-1/2" x 24"80 - 100 PSIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f819f2e6de2219dca065a9e664ad7ddc/original-dfdfd-e1423599994626.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/168b68deed1e892efa3fe4b3d4f25ae2/original-new-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4859ce31fdb847ece7c6b99f65898da5/original-new-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ad47eb27aeb121c6e9619e6795f0866/original-new-011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38aa9d112a16a0068e1eb87a018ac082/original-new-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bd54b8a4bdabeae6c82db3785f20af0/original-new-013-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/417ea9b7c5344394e0a1db88e5970dda/original-new-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/110ea1f935a38967093f0d9263d519b4/original-new-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b26313e0bf50a30e34e94c8fb45d5d0e/original-new-021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a799fb2e0e71aaf547d751171b9e470/original-new-015-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d6406cda5cc0e73e79144303c7f815b/original-new-017-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe4da09d5f4e815ac561e32ec1e05b8e/original-new-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/701b85852076a7a4398e5f56a07e9f67/original-new-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/527d1fa1d6a3c2726ad6b8a6310f8b03/original-new-0201-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b91c13e5172d6a57a7be9adaac1a5928/original-new-019-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6d6d7918f6ecc04857e648d7a18e719/original-new-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d587ed31d703a68089b0e30932ff675/original-new-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26d19e3ed10604b82f1e9585063977f2/original-new-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dbac7cf475d7e25e167306fdf57c33c/original-new-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/793d5b486348d23001136c05b9bf1f9f/original-new-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa9807d8e152619dc882e1e06e875062/original-new-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/720b8ac6270bf6c5b4134900601f33ff/original-new-007-1024x768.jpg2024-09-25 15:39:37 UTC6151966PullmaxX8-37.5 Plate BevelerScroll Down To See Video! Voltage 220 / 440 3 PH- Note currently wired on 220V S/N 56446Toolroom & General MachineryMetal Workingused2979-570Pawtucket, RIhttps://www.goldmachinery.com/listings/6151966-used-2979-570-pullmax-plate-beveler-flanger-model-x8-37-550 mm.25 Tons37.5 degrees0.375 mm.38 Tons0.28"11 FPM2.5 HPhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b97ada4bfbb70d57d102abc1597caf9/original-IMG_4053-e1563379869889.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29b4abb493f845a06e99ab2aacac0ecd/original-IMG_4064-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6488e3da2d4973edf2be5e6cebd7ce4/original-IMG_4053-558x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39ec6f0097fd1a3c81a4adf7e3e793d6/original-IMG_4054-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5c3627f58b2d685cf865fe13de7c95e/original-IMG_4055-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b4501cdcc076150e1735ef72250a0b0/original-IMG_4056-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ba549dcb1e0ab83dc05755bb895f2c1/original-IMG_4057-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2fbc26792bbb0c2536f2845432f6723/original-IMG_4058-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d993a8a7fcd2d2b163b43ed5dbbbc04/original-IMG_4059-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0eef879284fccf2d705dd49c3ed67b8d/original-IMG_4060-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ebcc38e251a81968de15e20faff484f/original-IMG_4061-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/852d55bbe1bfaed67a8b04c0e902ef92/original-IMG_4062-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad419bd83bc36e78debf0f005f21aabe/original-IMG_4063-1024x768.jpg2024-09-25 15:39:19 UTC6151967Scroll Down To See Video! Date of MFG 1996 Wired 220 Dimension W.x L. 54" x 48" Equipped With: L. to R. Power table feed Original owner & parts manual Mitutoyo model KA - D.R.O. R8 Collets Holders, Jacob Chuck , Boring/cutting attachments as photographedToolroom & General MachineryMillers, Verticalused4467-470Pawtucket, RIhttps://www.goldmachinery.com/listings/6151967-used-acra-am2v-3hp-variable-speed-vertical-milling-machine-power-feed-dro-tooling-new-1996220/440V AC/3PH9" x 42"30"12 1/2"16"12 1/4"3 , 5/8"R-8 or #30 TaperInf. Vari65~4,200 RPM3 3/8"5"3HP2,200 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e58c822727f6836191693aea1dd7ecc6/original-1-e1619703369371.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1b39ac6cd8ca18f0577f2cd885fa161/original-IMG_2057-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cfafdb8d7b1e2f1e0a89ca25fef9a71/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b8ba550c38e037b505740f69b58fd46/original-IMG_2044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5dc444eb02e4a81d690ea230f5cb20f2/original-IMG_2045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc4edc12cef806da526b7964cd16183e/original-IMG_2046-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/926bad5bd0c037ce4149c3439f99089c/original-IMG_2047-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d1ca9da35920ed5a5101793a714b414/original-IMG_2048-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f3a1b1fcfda33aedd2c3ffdb983d2ce/original-IMG_2049-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61b643c199cc21f5f5a9187138773bdc/original-IMG_2050-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b9ae55a8b54261cc1141246f5e724b2/original-IMG_2052-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0815617375aa45d2344466ddeea0fbb4/original-IMG_2053-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14027bf495602c6eeb963ed9ab730670/original-IMG_2054-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/019b3a3a6caac28ff570e9d178cd6c79/original-IMG_2055-1024x768.jpg2024-11-06 15:56:06 UTC6151968Model 4310 S/N 430753 Table size 13" x 6" Estimated overall size 34" L-R x 46 F-B x 58" H Equipped With: Surface illumination with adjustable intensity Vertical indicator 20X lensToolroom & General MachineryOptical Comparatorsused2921-530Pawtucket, RIhttps://www.goldmachinery.com/listings/6151968-used-2921-530-clausing-14-optical-comparator-model-4310https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9556ba5945132496081dc752eb33d33c/original-IMG-8997-e1705932949283.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56355101a65819476255d34a96e8cef3/original-IMG-9015-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3809b57b99d8ce258831afd9c8c309a/original-IMG-8997-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dc596fe7b7c60faa580491798e85a15/original-IMG-9005-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05b1d8dbc470efb008997896038f1a93/original-IMG-9010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/982a709c494e78e6ee85158dd42cf80b/original-IMG-9011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e922729c659df0543d490f2a32fd3f0/original-IMG-9012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f90915aeee205f848cc91a10f7535fdb/original-IMG-9014-1024x768.jpg2024-09-25 15:39:30 UTC6151969110V/1PH/60HZ Bench model Motorized spindle Variable ratio: 1:2 to 1:7 Equipped With: Letter font setToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused2132-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151969-used-2132-330-new-hermes-pantograph-engraving-machine-model-tx-a16" x 6"18,000 RPMself centering vise50W30" x 21-1/2"100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90138ae81d455a54370616bd8c30c9c6/original-124-e1461589645616.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c65e09e190f601cbcc3d7ce687d2757/original-125-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eac344855b6ed5c8f40e55b19933d77c/original-IMG_6928-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91cd96ca99cfb455409c9c504bc91d55/original-IMG_6929-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e83d12981e2f43929758bf931461f4be/original-IMG_6930-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/829e3fdbbc0768f1019ecfef427ab61d/original-IMG_6931-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ee61e0d46685586e9a4f1b92f041347/original-IMG_6933-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d78f2617217b6aaac434c89479a53b97/original-IMG_6937-1024x768.jpg2024-09-25 15:39:38 UTC6151970115V/1PH/60HZ Equipped With: 3" vise Cast iron base work light Clamps / workpiece hold downs Collets /tooling as photographed Recently taken from service from a local tool and die shop offered in excellent condition!Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5948-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151970-used-5948-330-gorton-2-dimensional-pantograph-engraver-model-p1-2-with-tooling8" x 18"8-7/8" x 24"10"8.75".31"11.125"5"7.25"8"21"11.625"0"4700 to 18,000 RPM1/4 HP35" x 42" x 48" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4cfca58e6bfe4036d1a01cdb68f055dd/original-IMG_7046-e1678293312536.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27b22bf1086cb64b8601f368004b1971/original-IMG_7053-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d57f30fd7bbd883e24d3de49d420262/original-IMG_7046-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c67e537d9040cf255bd22fe511bab9f9/original-IMG_7047-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/196fc21052b996989c08f9580d105fbf/original-IMG_7048-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57229b898b7e6101233b324bfee44263/original-IMG_7049-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7abf3005f90a5c7083d948b8f1c18e66/original-IMG_7050-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/854712a1f61f821c42381404786d6517/original-IMG_7051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d32e798f3bff44daf10d7c186d302dd/original-IMG_7052-768x1024.jpg2024-09-25 15:39:36 UTC6151971115V/1PH/60HZ (8) Spindle speeds, range: 4700 to 18,000 RPM Equipped With: Swivel vise Cast iron base Work light Recently taken from service from a local tool and die shop offered in excellent condition!Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5283-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151971-used-5283-330-gorton-2-dimensional-pantograph-engraver-model-p1-2-with-swivel-vise8" x 18"8-7/8" x 24"10"8.75".31"11.125"5"7.25"8"21"11.625"0"1/4 HP35" x 42" x 48" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d19fba13f9215b09a52d35058f55dc2a/original-IMG_0697-e1705933302829.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b70d08382e11188a88c7a91831e1dbe/original-IMG_0699-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c17de2398d24a016e1f1ee28df2a0998/original-IMG_0700-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee9198a76aa6924da49a882f2c4d9fc9/original-IMG_0701-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b283be54f2b6cc150c2a2e1e1874a0b/original-IMG_0702-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa6febef52909396a789c40bb58584c0/original-IMG_0703-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b907511042df40c01d77d48e7328a668/original-IMG_0693-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f149ec0fcbf2247bc5b6b04895aebf6/original-IMG_0694-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68e7549f4257ab57eb3b656b34dbf6d5/original-IMG_0695-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21942d8fa6064b624305c1d0c24a2c66/original-IMG_0696-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10b90e90854625b97efaec346d23d5dc/original-IMG_0697-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f10464689e99b75f9814e6407b12593a/original-IMG_0698-768x1024.jpg2024-09-25 15:39:37 UTC6151972With carrying case Condition Like NewToolroom & General MachineryMiscellaneous Machineryused2205-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151972-used-2205-700-brown-sharpe-1-4-super-precision-parallels-9-pair-model-599-921-46"1-3/4"1/4"0.0002"3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", 1-3/4"1/8"52-58 Rc5 lbs.Measuring,Inspecting, Calibration, Layout, Machine set-uphttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1eb474027e0e6fa7d2603299e689cc6/original-2205-1-MAIN-e1502379995573.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4936187bd4e3035339fa5ed09e02a27d/original-2205-1-MAIN1-866x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/334a192674d9ef6e057edcb73356b9a7/original-2205-2-1024x851.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dfe5bf03539d7d1fb40172482049aa3/original-2205-3-928x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b38fe24538e718428cceb88f9675d06b/original-2205-4-1024x608.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b593c01c686c09b5021d98f90379147/original-2205-5-1024x781.jpg2024-09-25 15:39:28 UTC6151973S/N 42632 120V/1PH/60HZ Equipped with: Dual hand controls Oval pressure gauges overall size 46" x 46 " x 50 " estimated weight 975 Lbs Autoroll Machine Corporation*, now known as Autoroll Print Technologies...The President of BG Automation, Bob Gagne, designed and programmed virtually all of the Padflex 1000, 2000, & 3000 series machines for Autoroll and has in-depth knowledge of the Rotoflex printhead controls. As such, we can provide highly knowledgeable technical assistance and/or service for this equipment. BG Automation Enterprises, Inc. Contact Us 508.634.7956 508.634.7956 fax info@bgautomation.com sales@bgautomation.com Autoroll Download: Autoroll Print Technologies, LLC Autoroll Machine Corporation 11 River St Middleton, MA 01949 Phone: (978) 774-2160Toolroom & General MachineryMiscellaneous Machineryused9251-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151973-used-9251-700-auto-roll-pad-printing-machine-model-micronic-10080 - 100 PSI38" x 44" x 60" high700 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cd2c817f119531ab640f90739be0c4a/original-006-e1502980850330.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a8d02aaf3dce2541a34d129149edafe/original-0061-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39a2d2debf0710417586b4530be23276/original-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ecd86f82ea8f3e4b2abaa0415c3f0bd/original-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6454c4cae070d7ef9b173fc8346ec9c4/original-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74b44bf9563c2093b00b3c0048d0ae20/original-011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01fea616506d9ae70093616a19535a65/original-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6096b6b7771c4061eb6696098b80d224/original-015-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4519a7298f190dde97447297ca963d89/original-016-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5008ad4a1f8623c2c611463ae1152af4/original-017-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e27be150b47d351fe083805be04f78f/original-0321-768x1024.jpg2024-09-25 15:39:37 UTC6151974EnvisionTECPerfactory 4Scroll Down To See Video! VOLTAGE 110V 1PH 50/60 CYCLE Process Vat photopolymerization (VPP) About section Perfactory® Perfactory® 4 Mini XL with ERM EnvisionTEC’s Perfactory 4 Mini XL with ERM is a low cost, easy maintenance and user friendly 3D rapid prototype manufacturing system. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the Perfactory 4 Mini XL produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional. Machine Properties * Perfactory® 4 Mini XL with ERM Lens System Lens f = 2.36” (60 mm) Lens f = 2.95” (75 mm) Build Envelope (Factory Adjustable at Time of Order) 4.5” x 2.8” x 8.66” (115 x 72 x 220 mm) 3.3” x 2.1” x 8.66” (84 x 52.5 x 220 mm) Projector Resolution 1920 x 1200 Pixels Native Pixel Size 0.0023” (60 µm) 0.0017” (44 µm) Pixel Size With ERM 0.0012” (30 µm) 0.0009” (22 µm) Dynamic Voxel Resolution in Z (User Adjustable and Material Dependent)** 0.0006” (15 µm) to 0.006 (150 µm) Data Handling STL Warranty 1 Year Included * Specifications are subject to change without notice. ** A voxel is a volumetric pixel. Materials Available Ideal for ABStuff, ABflex General purpose similar to ABS plastic ABS Flex (Requires factory fitted UV Option to use these materials) General purpose similar to ABS plastic with flexible characteristics EC500, EC3000 Casting HTM Series High temperature molding, architectural models, plating LS600, EC1000, WIC100G, WIC300, E-Shell® 200 General purpose Photosilver High temperature applications with fine detail PIC 100, EPIC Casting R5, R5 Gray, R11 General purpose, master models RCP30, RC31, RC70, RC90 High temperature applications System Properties » Build speed in constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness » Economic material use with no vat » Very few moving parts and minimal consumable components make the system user serviceable » Changeover between materials is quick and easy Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm) Weight: 188 lbs (85 kg) Electrical Requirements: 100-120V, 5.4 Amps, 220-240V, 2.4 Amps Patents Pending.Toolroom & General MachineryMiscellaneous Machineryused3931-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151974-used-envisiontec-perfactory-4-mini-xl-3d-printer-new-2007Germany140 × 105 × 230 mm3.38 L0.05 mm0.1 mmLED light > Digital Light Processing (DLP)ResinPolymers, Thermosets, Photopolymers730 × 480 × 1350 mm70 kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ceec2980826d1a975352a2ca7e38fa7c/original-IMG_2225-e1723047025119.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7e90d9b71744eb2353dcd0abc0307b6/original-IMG_2230-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42a1c8d7b64f0686619d444cd5ea50a1/original-IMG_2224-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb1387f7bb0355b53de051e479b5f641/original-IMG_2225-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fb1c5564becc142342f2151b53df71e/original-IMG_2226-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e27aaed31635a2c7cf3c3aa8975229ae/original-IMG_2227-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8caa6f1d9b328b53abb235507823a4d2/original-IMG_2228-768x1024.jpg2024-11-06 15:55:26 UTC6151975Scroll Down To See Video! ABOUT SECTION Revolutionary system to cut sprues from casting. Extremely fast and reliable, enabled to cut sprues without metal loss. Totally eliminates the operator arm fatigue and blades consumption. Suitable for yellow, red and especially with gold. Working either with thin and big sprues. Extremely fast and reliable No loss of metal No arm fatigue No blades consumption Suitable for yellow, red and especially white gold Working either with thin and big spruesToolroom & General MachineryMiscellaneous Machineryused3933-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151975-used-3933-700-daisy-srl-tc-02-jewelry-gold-sprue-cutting-machine230V /50Hz / single phase1 Kwmanual on front paneI or external footswitchIP4423 Kg200x260x166 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31dba235161dfb1f1fa4aeff875d944e/original-IMG_2337-e1723045519419.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dc5a2348f11a6ed75dead5db84b51cc/original-IMG_2343-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ab3c92f29b3dc0d8ea14e747611bd74/original-IMG_2344-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f00a3d742f18aaae30d9fd396f5e480d/original-IMG_2345-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18146360ed6b50ef62d587c144152181/original-IMG_2337-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e89cf21e5d432ec41d76c4a996dc92b2/original-IMG_2338-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7aa9ff1979427c4de67f78ca79d4eabf/original-IMG_2339-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/914d0778d7faa2760c316f7c0af403e4/original-IMG_2340-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6721d4ef1927cbb5495a4bc5cfc38fe/original-IMG_2341-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b27976f7d73673829be50d8d258b12e/original-IMG_2342-1024x768.jpg2025-01-24 14:03:54 UTC6151976115V1PH/60HZ STAMPED NYCFD APPROVED Capacity; 10 liters per minute Equipped With: On/off switchToolroom & General MachineryMiscellaneous MachineryusedAS10016152264-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151976-used-2264-700-airsep-oxygen-generator-model-as-1041 - 95 degrees4.0estimated 55 decibels590 watts20 PSIG14" x 12-1/2" x 26" high40 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40c18997ead3002701dbc8063d49aed3/original-add-027-e1465562314910.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/724db8972f1233dabde4ac6b1172a44d/original-add-034-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6797f17fe7c743084850a5f2b39295ca/original-add-0271-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05bc8bcf24bc4eb01e47b817113922ca/original-add-028-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14e1462f57525b48fe6447179a95fe2a/original-add-029-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1816ad4e73b72d974d55f4e19ab272e/original-add-031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f00cf646170faf9c863a0cd5e6688b85/original-add-032-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cee57379ef1252f681aded26cfd65701/original-0392-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20320b656321856a0a2eb9ee36a41c50/original-0371-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db4a44903c19193642959c68b919b40c/original-0382-1024x768.jpg2024-09-25 15:39:31 UTC6151977110V/1PH/60HZToolroom & General MachineryMiscellaneous Machineryused1463-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151977-used-1463-700-moorfeed-10-vibratory-spiral-parts-feeder-model-1010"9-1/2"2-1/2"7/8"5/8"12" x 13" x 13" high100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99b712d27f38fe6e7a78d4e94bd8af67/original-1463-1-main-e1443796680737.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dde34477249b586f0c69ffc09e6a54c/original-1463-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c12b360d0c3960fdc45fa586d8215a6/original-1463-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67a2d332d0070713aab405e31baccf7e/original-1463-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b2f7a4c370d22c935cff90df8691e60/original-1463-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a06e884f96aaee493c56aaf9d4ce8b19/original-1463-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/089083862c1e802e325b57f8b8510dcf/original-1463-6.jpg2024-09-25 15:39:30 UTC6151978S/N 41470 120V/1PH/60HZ Equipped with: Dual hand controls Oval pressure gauges overall size 46" x 46 " x 50 " estimated weight 975 Lbs Autoroll Machine Corporation*, now known as Autoroll Print Technologies...The President of BG Automation, Bob Gagne, designed and programmed virtually all of the Padflex 1000, 2000, & 3000 series machines for Autoroll and has in-depth knowledge of the Rotoflex printhead controls. As such, we can provide highly knowledgeable technical assistance and/or service for this equipment. BG Automation Enterprises, Inc. Contact Us 508.634.7956 508.634.7956 fax info@bgautomation.com sales@bgautomation.com Autoroll Download: Autoroll Print Technologies, LLC Autoroll Machine Corporation 11 River St Middleton, MA 01949 Phone: (978) 774-2160Toolroom & General MachineryMiscellaneous Machineryused9250-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151978-used-9250-700-auto-roll-pad-printing-machine-model-micronic-10080 - 100 PSI38" x 44" x 60" high700 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce77c3515627c4c14607a1cf13f4bfb2/original-020-e1502980142898.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c7b6e76807cbb8383b66e8ef798b8e6/original-0201-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1242a1653ca7e2853f95fe3c08556b0/original-021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49331ce3708deba0f89c6a20e01fdbd3/original-022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f5b984d0c51b2c80cf41d72913db0c3/original-023-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cc4a173e41ff647c96d0c49f50ed5c9/original-024-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53843d503d606ee1b148940dec4a5f36/original-026-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07cfdd522da05a0e6d26cf4c3270ae53/original-027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8698cbcc9ece85564800778b07dea4b/original-028-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30617072ad84307b95aab4fd4f848fcf/original-030-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3ba41325cfaefc1a67352088f374508/original-032-768x1024.jpg2024-09-25 15:39:36 UTC6151979115V/1PH/60HZ Equipped With: 3" vise Cast iron base work light Clamps / workpiece hold downs Collets /tooling as photographed Recently taken from service from a local tool and die shop offered in excellent condition!Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5949-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151979-used-5949-330-gorton-2-dimensional-pantograph-engraver-model-p1-2-with-tooling8" x 18"8-7/8" x 24"10"8.75".31"11.125"5"7.25"8"21"11.625"0"4700 to 18,000 RPM1/4 HP35" x 42" x 48" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b40cca8abb24b491b2f9dfec6975ed6/original-IMG_7043-e1678293115196.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c462f127d143163cf7384eda7c74bbb/original-IMG_7040-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/671866cf9d162f7e290ae3d3f6d1421c/original-IMG_7041-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30c797ba3b41f5346ad9bcefbc8df620/original-IMG_7042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4054bc3ad90cc399d63dde7f31868e1e/original-IMG_7043-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4f9b27ab54faf47fbd1b9e77626a663/original-IMG_7033-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17e66b4811c6bebb339c8ba3b306c371/original-IMG_7034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8045395a58a0d9ea57a97324d44b059/original-IMG_7035-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cce51ffc710da6f753e7681854dca6fa/original-IMG_7036-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3677e87ad9390355d134c1db5d95c6e9/original-IMG_7037-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce83919e3d03a0236df39ddf73a5057d/original-IMG_7038-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0af8233f59213c5eaf0624483ea38aa/original-IMG_7039-1024x768.jpg2024-09-25 15:39:37 UTC615198025 Engraving ratios from 2:1 to 7:1 10" x 24" Graduated copy table for holding multi copy holding slides 11/64" Diameter rotating cutter spindle with dual side and bottom micrometer assemblies; depth setting for engraving with or without depth nose in .001" increments (ITX-3). Non-rotating heavy duty diamond spindle Auto-Indexing System 7 Cones up to 15" diameter Equipped With: Factory StandToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused3020-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151980-used-3020-330-new-hermes-universal-manual-engraver-model-gtx-318"1 ratio24" x 31"210 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c298203f533cc4e5fa6cc5a2f40290d/original-new-hermes-engraving-machine-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f80731793facdaa435fdd322eccb7b3/original-new-hermes-engraving-machine-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e22ea72b0b7b50b2819b60e4ec80a175/original-new-hermes-engraving-machine-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13a0cce3932d081390f190b3f0552eba/original-new-hermes-engraving-machine-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acbd9ba62ddcf7eec96fcf69fa56a006/original-new-hermes-engraving-machine-011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b20f01ed82d74d77cac38d2cdc213150/original-13-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bbf499620aaef1291c7d71d82fb1aea/original-new-hermes-engraving-machine-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44d745a5a426f4ceebc6819818aac273/original-new-hermes-engraving-machine-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b18d8c9ba47686c3f46299c595a8d07/original-new-hermes-engraving-machine-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/862375d47dae1308d184260f31d4691e/original-new-hermes-engraving-machine-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/583de275f20daa65fde265ff841abe60/original-new-hermes-engraving-machine-005-1024x768.jpg2024-09-25 15:39:46 UTC615198127 Plates total 23 Small Sized Plates: 5" to 6" in Diameter 1" Thickness 4 Large Sized Plates: 8" in Diameter 1" ThicknessToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused3364-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6151981-used-3364-700-duplicating-plates-27-composite-hand-carved-medallions-jewelryhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5444b4975465b04f08e08c964cbfb2f5/original-IMG_4327-e1590681337778.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0347768cc679a0e64b699752e7d10be/original-IMG_4327-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efc6142b8e70c95b9b0597eadb7c8fd2/original-IMG_4328-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2f304391dec0e0751a71189c032de80/original-IMG_4329-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bff7e631c6bf9ab3b28e211fe0ce00c/original-IMG_4330-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/209fef8950a6c287d3a7b73099b05443/original-IMG_4331-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2aae3be762b84477a9ce1cd281dfc97/original-IMG_4332-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92f28ebb196c44ed82a965056c074e51/original-IMG_4333-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8b3016cd144ae8ee995ba5702b00ea9/original-IMG_4334-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65c156cfff368aa75590ce2302f384f8/original-IMG_4335-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71fdf4cc2a1e32feddf3df3ae0644a64/original-IMG_4336-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52eb12710e2e6fdfa997144d99ff85fb/original-IMG_4337-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f3969c3cea610e124f93af83d57b926/original-IMG_4338-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80b268e4ab744c7f159f103c146e9b3b/original-IMG_4339-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27390db3ad93e817eaf2c734fecfac2a/original-IMG_4340-1024x768.jpg2024-09-25 15:39:41 UTC6151982Working table 500 x 200 mm Gr. distance table to spindle 300 mm Transversal movement of the table 160 mm Longitudinal movement of the table 300 mm Stencil table 550 x 324 mm Rotatable by 360 Distance from pantograph arm to table 20 mm Large bore of the collet 6,0 mm Adjustability of spindle vertical fine/coarse 1 / 3 mm spindle speed 1900 - 15000 rpm. Small / large transmission ratio 1:1 / 1:50 Drive power 0,2 kW Dimensions 1235 x 1075 x 1240 mm Weight approx. 250 kgToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused3429-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151982-used-3429-330-dekel-type-g1l-2-dimensional-pantograph-engraver-floor-modelhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7bc99fe89273c266e4e1488a0982a7e/original-IMG_0351-e1705934253249.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a72239ea755a598c3b36e18ae20d216/original-IMG_0354-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02fa801a55a2a2edf0a84483fde8c65f/original-IMG_0350-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/527b0203e521e51a203c9e979a461229/original-IMG_0351-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bab255e6d739b54818933665afe5f03/original-IMG_0352-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa75d113786bd4b4a79b1c508045c574/original-IMG_0353-768x1024.jpg2024-09-25 15:39:33 UTC6151983115V/1PH/60HZ Equipped With: 3" vise Cast iron base work light Clamps / workpiece hold downs Collets /tooling as photographed Recently taken from service from a local tool and die shop offered in excellent condition!Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5950-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151983-used-5950-330-gorton-2-dimensional-pantograph-engraver-model-p1-2-with-tooling8" x 18"8-7/8" x 24"10"8.75".31"11.125"5"7.25"8"21"11.625"0"4700 to 18,000 RPM1/4 HP35" x 42" x 48" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d2e54e87c440beab05f92bf3b8c88df/original-IMG_7024-e1678291763274.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69231f4343981920f1974cba3ee18c1c/original-IMG_7031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8dfc884b87a334e86c9adb8f5688c075/original-IMG_7024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ce526a1b8a415ed10ea80ef17e0f6e6/original-IMG_7025-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5e3cbcd56eb7fb7a387892e23f72451/original-IMG_7026-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3c7ac797f623d1e82576c9e2ca0b96e/original-IMG_7027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b473074a400c4a78eff822244970a89b/original-IMG_7029-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba4d15bc7e1f46aedebd39966d4d2975/original-IMG_7030-768x1024.jpg2024-09-25 15:39:35 UTC6151984220 volts 3phase 50/60cycle Equipped With: Change gears High speed spindle Counter weightsToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused3938-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151984-used-3938-330-lienhard-automatic-copy-reducing-3d-duplicating-reproduction-machine-medallions-coins-plaques-more400mm - 300mm - 200mm - 100mm33mm - 25mm - 16mm - 8mm220 mm - 170mm - 120mm - 65mm1800mm700mm1500mm860 kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95bdfe8aa8a2000cda13004a625d81f3/original-IMG_1909-e1716471886828.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3209c79b86ffbfc034098e8b371e8590/original-IMG_1923-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7102f4cb0c837b59de5e64a37d88489/original-IMG_1924-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/887d326cedf2e0df70e8b2e3bb3fa540/original-IMG_1925-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fca9e3671f24640dc48b3a5f7a68180b/original-IMG_1909-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/712e516e1ba53bb85d0a4ee4bc9fb538/original-IMG_1910-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/321977d6b43162a19cbce6f63ae89d61/original-IMG_1911-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d522a602c193ca2d92e5483f726c71c/original-IMG_1912-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f3d2d97cae990b82be62fe8126c2bb2/original-IMG_1913-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa1c5d907873de94a7cf3ff1b8110309/original-IMG_1914-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b710773419779d89d5df6eb77545016a/original-IMG_1915-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/687bf35009dbb25ecf868777e71447d1/original-IMG_1916-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ddc5f08c0f5a4cd4a0d0e3261ea6cca/original-IMG_1917-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57b6c59b661f5cdebfc09bb3864b0ed3/original-IMG_1918-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ea2c5e0665b195f0d6775b1d35960ec/original-IMG_1919-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a03e5a965c59b89abdfeb424939b290e/original-IMG_1920-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffb75f44c7bf3e70cfdb4bf9d370b45e/original-IMG_1921-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dfb31f072ab3ca6f268051c399b5a4b/original-IMG_1922-768x1024.jpg2024-09-25 15:39:39 UTC6151985Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused1485-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151985-used-1485-330-gorton-bench-model-single-lip-cutter-grinder-model-265-1#4NS collet5500 RPM4"5/8"1/3 HP, 1725 RPM24" x 18" x 12" high125 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d1125d2e3d2675c25d042113d689eea/original-036-e1444754422280.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/633beef4f6b2fc64c3e47a1b5c1eaced/original-0361-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f82ef066a07e0bbe4661a2a75622b78/original-037-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/081bab8e919b9147328cdbda4a8bb9e6/original-039-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d44b5a9d21b6bfdf32c07de6da840b23/original-040-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31f7eec0bf245f3e9186f35248e56498/original-042-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/437e56c83a6b14bb270809452741e2e3/original-044-1024x768.jpg2024-09-25 15:39:39 UTC6151986Specially designed for the jewelry, electronics & medical industries, they’re also the perfect educational tool for students eager for hands-on experience in the plastic industry. AB-400 Semi-Automatic Plastic Injection Machine Specially designed for the jewelry, medical, dental, electronics and other industries, the AB-400 can handle a variety of injection molding applications, including insert molding and over molding. The machine features a 5 ton power clamp and a 3 by 4 inch mold capacity; it can inject a shot size of up to 0.5 oz (14 grams). It’s outfitted with a foot-operated, sealed material hopper that has a capacity of 30 oz (840 grams). It is ideal for production runs and does not require a permanent installation. Priced for.. $18,900. USD Goldpro® Model AB-200-4 Semi-Automatic Easy to read & adjust digital temp controller Adjustable mold stop with automatic ejector Adjustable mold clamp for different thickness molds Aircraft spec. aluminum body Adj. sequencing & injection cycle, 5-99 seconds Built-in resetable production counter Stainless steel injection chamber & piston for corrosion resistance All pneumatic devices are of the “no-lube” design; ideal for medical & other clean room applications Working area protected by transparent safety guard & red heat shield Price: $11,780.00 USD Prices are Ex-Site Packing/Crating Additional $175. Goldpro® Model AB-150-4 Hydro-Pneumatic Easy to read and adjust digital temperature controller Lever operated power clamp Adjustable mold stop with automatic ejector Adjustable mold clamp for different thickness molds Ergonomic workstation design Aircraft spec. aluminum body Stainless steel injection chamber & piston for corrosion resistance All pneumatic devices are of the “no-lube” design making the machine ideal for medical and other clean room applications Working area protected by transparent safety-guard & red heat shield Price: $10,500.00 USD Prices are Ex-Site Packing/Crating Additional $175. Goldpro® Model AB-100-4 MANUAL Easy to read & adjust digital temperature controller Adjustable ram speed control Aircraft spec. aluminum body Easy view material hopper Stainless steel injection chamber & piston for corrosion resistance All pneumatic devices are of the “no-lube” design; ideal for medical & other clean room applications Working area protected by transparent safety-guard and safety red heat shield Right & left hand operation Mold stop and ejector Quick acting clamp for easy operation Hardened screw & bronze nut for long wear. Price: $7,560.00 USD Prices are Ex-Site Packing/Crating Additional $175.Toolroom & General MachineryMiscellaneous MachinerynewPawtucket, RIhttps://www.goldmachinery.com/listings/6151986-new-goldpro-advanced-model-plastic-injectorsdoes not require permanent installation.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61964b8817a7472dd1c989928c7d908f/original-unnamed.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c11e540f50c4b9082da012d0bd124dba/original-AB-200.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bea6b7f60bb1e1db1bc66e360d360237/original-AB-150.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64be86fe9fd6bd23646b98dcb78dda1f/original-AB-100.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9778145e3a280b1fea08ffd42d5ca28a/original-AB-Plastic-Injector.gif2024-09-25 15:39:26 UTC6151987115V/1PH/60HZ S/N 2838 Pantograph range: 1:1 to infinity Graduated from: 1:1 to 100:1 Graduated in tenths from: 1:1 to 3:1 6-speeds from 3500 RPM to 20,000 RPM 10" x 18" 6 - dovetail grooves, 1-1/4" wide Feed screw dials graduate in .001" Note: will engrave to center of a 30" panel Equipped With: Hold downs Steel stand Operating manual MISTING UNITToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused1443-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151987-used-1443-330-preis-2-dimensional-panto-engraver-model-2d-41/4".040"1/10" to 1/4"6" x 12"13/32" (3)6"7"7" Copy holder table size1"1/2 hp, 3450 RPM38" x 21" x 50" high400 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9288b065eb9677990ad3e76dc860ab8a/original-1-e1664981570480.jpg2024-09-25 15:39:37 UTC6151988220v/3ph/60hz Pantograph Reduction Ratio: 7:1 down to 1.8:1 Copy Table Size: 8" x 18" with ¼" Threaded Holes: Work Table Size: 6" x 6" with (1)-T-Slot Approximate Size: 21" x 18" x 20" High: Approximate Net Weight: 90 lbs. Equipped With: Scribe Engraving Spindle Tracing StylusToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5549Pawtucket, RIhttps://www.goldmachinery.com/listings/6151988-used-5549-used-preis-panto-engraver-machine3"5"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75d20db25c203bcc65eeecc2d8623590/original-5549.jpg2024-09-25 15:39:37 UTC6151989Pantograph Reduction Ratio: 7:1 down to 1.8:1 Copy Table Size: 8" x 18" with ¼" Threaded Holes: Work Table Size: 6" x 6" with (1)-T-Slot Approximate Size: 21" x 18" x 20" High: Approximate Net Weight: 90 lbs. Equipped With: Scribe Engraving Spindle Tracing StylusToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused5551-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151989-used-5551-used-preis-panto-engraver-machine3"5"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d55379d31c091a25653fd3f66afa83b/original-5551.jpg2024-09-25 15:39:37 UTC6151990Shown with BP Dust Collector. Available with Abrasive Separator, Pull-Through Dust Collector and DP850 Direct Pressure Price: $2395.00, with Pull-Through Dust Collector: $2945.00, with abrasive separator: $3115.00 (prices FOB factory Michigan)Toolroom & General MachinerySandblastersnewtrincoPawtucket, RIhttps://www.goldmachinery.com/listings/6151990-new-goldpro-trinco-master-model-48-x-36-cabinet-sandblaster37”28”30”(2) SIDE DOORS500 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be0963722d6d0b99853c989aa93ce788/original-master40x40t.jpg2024-09-25 15:39:37 UTC6151991FLIP TOP—40”x 40” SIDE DOOR—20”x 30” Available with BP Dust Collector (shown) 400 CFM Dust Collector or Abrasive Separator as priced below Price : With BP Coll: $2,365.00, with 400 CFM Collector: $3.335.00, with Abrasive Separator: $3,685.00 (prices FOB factory Mich)Toolroom & General MachinerySandblastersnewtrincoPawtucket, RIhttps://www.goldmachinery.com/listings/6151991-new-goldpro-trinco-master-model-40-x-40-split-level-sandblaster66”45”71”71”TWO (2)560 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be0963722d6d0b99853c989aa93ce788/original-master40x40t.jpg2024-09-25 15:39:37 UTC6151992Patent # 7474 Circa 1900 Frank B Grover Co/New York Equipped With: Wood Bench Lamp Attachment, Extra Adjustable Angle Table with Pin Vise, Extra Large Assortment of Brass Fonts-Letters & Numbers, Extra Guide Frame HousingToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused2058-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6151992-used-2058-antique-frank-b-grover-co-new-york-2-dimensional-engraving-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49347181533c226e17d000be62623c01/original-2058.jpg2024-09-25 15:39:37 UTC6151993FLIP TOP—48”x 24” SIDE DOOR—11”x 11” Available with BP Dust Collector (shown) 400 CFM Dust Collector or Abrasive Separator. Also available in Model 48x30. Price: $1895.00, with 100 CFM Dust Collector: $2685.00, with abrasive separator: $2775.00 (prices FOB factory Michigan)Toolroom & General MachinerySandblastersnewtrinco48x24Pawtucket, RIhttps://www.goldmachinery.com/listings/6151993-new-goldpro-trinco-master-model-48-x-24-split-level-sandblaster38”53”65”50”TWO (2)430 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de66ae30d9f8bfcf8efc757dac985225/original-master48x24.jpg2024-09-25 15:39:37 UTC6151994220 volts - 3 phase - 50/60 Hz 3D engraving, reproduction and copy milling System ~ Reducer 1 Copy milling made easy. For toolmaking, mouldmaking, the jewellery industry, mints and engraving works, the use of the engraving machine means a slice of independence. PRECISE HIGH PRECISION SPINDLE #PVSF-2 HUB/HOB MAKING - SEE SAMPLES PHOTOS COIN AND MEDALLION MAKING WITH HIGH RELIEF CAPABILITY METAL,S, PLASTICS, OTHER Technical data: Reduction proportion 1:1.41 to 1:100 Mirror transfer (Janus mould) Profile flattening or heightening max. 0-100% Automatic speed regulation of tool and model Continuous feed Precision/engraving spindle Ø 40 x 140, 16.000 rpm, maintenance-free with Ø 6 mm chuck Ø 6 mm engraver's milling cutter in hard metal Basic machine dimensions 850 x 2000 x 1750 For over sea's shipment estimated Crate size ) 52" x 72" x 70 " Domestic skid / cover would be two skids Skid 1) 76" x 48" x 79" h 1800 LBS Skid 2) 48" x 40 " x 74" h 315 h LBS Equipped With: Precision/engraving spindle w/ Chiller Precisely-controlled feeler arm through the use of double rollers Support plate weights 2 1/2" work chuck~ with 11/2" inside diameter to hold work piece SAMPLES:Toolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused3016-330Pawtucket, RIhttps://www.goldmachinery.com/listings/6151994-used-3016-330-gudel-3d-duplicating-reducing-enlarging-engraving-machine-coins-medallions2571 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b053470b2bf6698707a3bc04259de3a3/original-STG35813-e1550782493819.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c81143e909ea76b5b0b72602455b5e1/original-STG46975.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7812c19ace0a7daeccc337520fecc70e/original-STG49687.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85a809b85466d6e426cd71d52c4487c1/original-STG52150.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e79d05814221f0f2bfad29ab55ccb48/original-STG55491.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfbe1fe1fc025d594015698d5fadaa3d/original-STG65520.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b68550ae53af7ba1063332391e1f108/original-STG00864.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/faa7821508828e6ad9fee67ff749fb47/original-STG01204.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97f04e03dcba147dde8407885ed0155d/original-STG05247.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/649ce88a246a3865e9ac09dbcd2e4c41/original-STG06066.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e7e056ddbae1f09b0bca42d4018a7a5/original-STG15405.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a2b5dcddd3ebc2f60451483a7355f78/original-STG16313.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/786c1063ff8a4aeb77839e5bff8d9c52/original-STG16614.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e72da81c25288092ab4e47fecdfa2bc/original-STG20586.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb2f14a2de3295414608e3216e65898d/original-STG22029.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdf0448ef7226da147b17ed43c8f9eb6/original-STG246441.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49dc38f7bc284f45f18feaa7767a214d/original-STG27637.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9b21c6a1bb4be521f9acfec83aab448/original-STG33669.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e20c0bd8aefb23c94316fde1a72639e2/original-STG33739.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db45dbb1e7935de365d9b41c8232dddd/original-STG35813.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94cb04f84e8b9a02acd6f5e19294bace/original-STG41589.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35e00b12b02de480d5916373efe73b3a/original-STG42205.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/940b77cb2f2368e47859610bd5d1afce/original-STG37105.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5c2f205db15ddc11b0eeb0a9ae4e71c/original-STG42260.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea911ca8fa720bdf18646b6252f7808f/original-714iMz.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/489956437da1008dabcde8587cc93f41/original-HwUciz.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c804d6e6fb0cd701b27fde95e658a2e/original-1u1sbX.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25f41e7967546f76fe2563e846dced4a/original-p0rbsx.png2024-09-25 15:39:49 UTC6151995SIDE DOOR—20”x 36” Available with BP Dust Collector (shown) 800 CFM Dust Collector or Abrasive Separator Price: $3825.00, with 400 CFM Dust Collector: $4385.00, with abrasive separator: $5085.00, (prices FOB factory Michigan)Toolroom & General MachinerySandblastersnewtrincoPawtucket, RIhttps://www.goldmachinery.com/listings/6151995-new-goldpro-trinco-master-model-60-x-48-split-level-sandblaster74”65”71”77”TWO (2) FLIP TOP—60”x 48”740 LBS.2024-09-25 15:39:41 UTC6151996Toolroom & General MachinerySandersused5955-590Pawtucket, RIhttps://www.goldmachinery.com/listings/6151996-used-5955-590-6-x-9-disc-belt-floor-model-horizontal-vertical-sanderDisc Sander1HP, 115V, 1Ph6" x 48"165045° Out45° Out9"21005/823" x 26" x 61"170 poundshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cea7c86011e64a03c98fc1f6a5c56ffd/original-IMG_4176-e1675102709586.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30420a6c1ba9a67b4dbb74ad70f2eca7/original-IMG_4179-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f4c03602553744ac288c1bae8fb60c1/original-IMG_4176-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/756c029d4c4f070473212337622c39ec/original-IMG_4177-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72f864f965b25bf866cb41b9fea2e9f7/original-IMG_4178-768x1024.jpg2024-09-25 15:39:40 UTC6151997Table size - 20in X 22" OVERALL DIMENSIONS: Length: 25 in.Width: 40in. Height: 36 in. Equipped With: Factory StandToolroom & General MachinerySawsused3367-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6151997-used-3367-600-10-delta-table-saw-model-34-670-1-ph3.5 in.2.5 in.32.5 in.22.5 in.15 amp, Single phase, 60 Hz120 V5000 RPM.625 in. (15.875 mm)45º Left2.5 "Anti-Friction110 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70e7fd8228d73fa3133ed759149ca0c7/original-3-1-e1591362980895.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0292bd37c95c91556034f15cf176d59e/original-IMG_9360-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67e90bc2b597eda4d0c1ad1381fab1ed/original-1-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/345ed55bed474b3903b0fd09310bc7cf/original-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed4c02b79a29ec97bf22ebc9c19ce44e/original-3-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d14756bb270a440a0e4992a9573397a1/original-IMG_9354-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d993a0a7a9dfdfb0e0770fc2a3a60861/original-IMG_9355-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/512880ce1a333ebf44d9b1f798b71249/original-IMG_9359-1024x768.jpg2024-09-25 15:39:43 UTC6151998115V/1PH/60HZ Equipped With: Chip blowerToolroom & General MachinerySawsused8207-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6151998-used-8207-600-dremel-model-1671-16-reciprocating-bench-model-scroll-saw16"12" round26" x 14" x 15" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70c917fd63c52e2c2a4c541528aef7ee/original-8207.jpg2024-09-25 15:39:42 UTC615199926237.0Circular machine with inclined cut. Cut is made by mini-circular saws. The machine cuts solid and hollow bars of any type of molding and material, 10x10 max mm, with cutting precision +- 0,04 mm. All movements can be adjusted: Working stroke and forwarding speed Feeding Sawing unit rotation Working cycle regulated by a microprocessor. Closed-circuit lubrication with filings separation. Installed horse power 0,37 KW. Power supply 380 V. 50 HZ Three-phase. Dimensions: Length 700 mm Width 1000 mm Height 1600 mm Approx.Weight 300 kg Availability: Ex-Factory, ItalyToolroom & General MachinerySawsnewsaPawtucket, RIhttps://www.goldmachinery.com/listings/6151999-new-tvn-mod-sa-automatic-circular-sawing-machine-with-inclined-cut-from-0-90-degrees-suitable-for-tubing-and-solid-profileshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9b4ab1a2c820527fe66c76694ab158e/original-sa.jpg2024-09-25 15:39:42 UTC6152000Voltage 110 / 220 1ph 50/60 cycle New 2004 Model 137-3175 S/N 472268Toolroom & General MachinerySawsused5972-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152000-used-5972-600-enco-7-x-12-manual-combo-horizontal-vertical-bandsaw-coolant-system-new-2004ManualStep Pulley457 x 127457 x 12 in7.019.05; 0.752362.20; 930.8; 0.031512Yes120 x 1254-3/4 x 4-7/85127.0019.050.75003/490, 135, 195, 2552362.209370.800.031512955.0437.6000https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b51f47679ee28e83d0dcfa1dec5f47b3/original-2-2-e1664376756827.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39eb12bd1b291e38943315a8cc158344/original-IMG_6346-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c65719867770a8a78104a861c5553b1/original-IMG_6349-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afdba4f969f9eba69e02dc8fb86f14a2/original-IMG_6354-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6ecd66131d439b42248ac00166089dc/original-IMG_6360-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6558d23e34a81e9f2aa47245ea0e6c97/original-1-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45f75acdb272654036079c6e4279a675/original-2-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ab0d6406411762c92e532796e08a037/original-3-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0990fabca8d376c4bea1e422b4166e38/original-4-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67533312999494cc4305c2de306cc1e2/original-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcb86fdc5e2c11f8611a9af4fc6fff7e/original-IMG_6344-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9023440c073e4cbbeb7d27489746cc77/original-IMG_6345-1024x768.jpg2024-09-25 15:39:43 UTC6152001Esocomatic Scope Mounts on Escomatic D2 With Wooden BoxToolroom & General MachineryScrew Machines, Hand & Autoused8843-145Pawtucket, RIhttps://www.goldmachinery.com/listings/6152001-used-8843-145-escomatic-scope-with-wooden-boxhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd28b34b24e183bf8a1e5c2918088da3/original-gold-001-e1369752312884.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d08e2743412a7f5489dc53be9ac1f8c/original-gold-0011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b817a8e7dc2d8037f6425c350c1187c6/original-gold-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd4b139b4954af58136b52707b64bc2b/original-gold-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ea12015325cf500fd184b9ab851b234/original-IMG_8191-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29b95c5e984ecc315d2c1ffe02540157/original-IMG_8188-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/011e1e44b8cd169becc5a099ce3976c7/original-IMG_8189-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ffe77018e05428342d065be97721df4/original-IMG_8190-1024x768.jpg2024-09-25 15:39:47 UTC6152002115V/1PH/60HZ Temperatures up to 5000 degrees F. Single torch model Uses distilled water and methyl alcohol Burns clean hydrogen & oxygen gas from distilled water Flame controlled by amperage setting and needle tip size Equipped With: 2 Welding Torches Applications / Details This unique machine generates a Clean PinPoint Flame With Temperatures Up to 5000 ºF from a Pen Size Torch This unit is supplied with 1 torch. Very Safe - No Gas tanks needed Easy to Maintain No CO2 Emissions The Uses of Hydrogen & Oxygen Torches H2O torches are used for soldering and brazing and are proven to be useful in many industrial fields. Advantages of Hydrogen/Oxygen Torches Soldering with the gas generated by a hydrogen torch system is a better alternative to using the pressurized fuel tanks. The Hydrogen Oxygen generator produces gas by using electricity to break down the water into Hydrogen and Oxygen gas. Therefore creating a safer, cleaner and very economical gas flame with water as fuel. With hydrogen and oxygen as its fuel sources, the torch produces a much safer, hotter and cleaner flame. It's also easy to set up and very user friendly. Many small shops have restrictions on the use of gas tanks in their buildings. The H2O welder is a great alternative because it does not store any gas because it makes it on demand. Jewelry Making There are many reasons why those working on jewelry for commercial and personal reasons would use a hydrogen oxygen torch. They can be used for resizing rings, chain repairs and alterations, fixing damaged prongs or any soldering task needed. Annealing Hydrogen torches are great for annealing metals. When annealing, the metal is heated slowly to a specific temperature and then it is cooled slowly. Because this process softens the metal it can be shaped and cut easier. Glass Processing Hydrogen torches can be used for reshaping glass and metals. One popular use is heating glass colors together to build stronger, or different forms of glass. Medical and Dental Devices The hydrogen torch can also be used in the dental and medical fields, because it uses clean fuel and it won't contaminate medical or dental devices. The fine pinpoint flame is perfect for very small items like dental appliances, stents and guide wires. Plastics The torch can be used to flame polish edges of plastic sheets. Other applications include but are not limited to: 1. Thermocouple repairs and production 2. Wax castings 3. Electro-mechanical devices 4. Transformer soldering where a soldering iron can't heat the large conductorToolroom & General MachineryWeldersused5909-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152002-used-5909-300-sra-250-h2o-hydrogen-welder-for-soldering-and-brazing-2-torches190 watts11" x 9.6" x 11" high31 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c49d9c30e8a9d009726c41e15c6cf4d2/original-IMG_8721-e1695826548230.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8ab3264a7bf8e2f2f591b3130ac3ca0/original-IMG_8726-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d13a85288558bf6fa4897dcee527ae5/original-IMG_8721-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b889168e9184c2410ecc18b11c10dd94/original-IMG_8722-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dee867ec759f48ee806e2b50e120a062/original-IMG_8723-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4dd6e5c14713f607e3bf79ca64fcc1d/original-IMG_8724-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ca64ba8d8f5f6c3300e70073adb726e/original-IMG_8725-1024x768.jpg2024-09-25 15:39:48 UTC6152003110 Volt / Single Phase S/N 73G-1 New 1990 Overall size 15" x 18" x 24" Requires 60 to 100 p.s. i. (compressed air) Voltage 110 volt 50-60 Hz. 1 phase Weld gold, silver, copper, brass, aluminum, stainless steel, white metal castings and or any combination of metals Weld all types of metal, similar & dissimilar Weld metal as thin as .005" (.15mm) Solid state electro/pneumatic maintenance free operationToolroom & General MachineryWeldersused2814-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152003-used-2814-300-abi-mini-7000-automatic-fusion-welder60 lbs. (27 Kg)up to 500,000 weldshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b70bc22777a0060948b9478b88ccecd/original-IMG-4157-e1519310398941.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3882f4d805b904f449c3a80ea2674d4/original-IMG-41571-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9635ce02fb3fddb7019235f07addd4c9/original-IMG-4158-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2afdc98484d61bba5b5a5a1b64c0dc42/original-IMG-4159-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80a3f183cc740e9ae968b717af44700b/original-IMG-4160-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3ea0e357e1bdc09353156936347035d/original-IMG-4161-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcd281dd7bb63d47f93ce710ff76a4db/original-IMG-4163-768x1024.jpg2024-09-25 15:39:50 UTC6152004FRONT OPENING LID-TYPE—48”x 13” DOOR ON EACH SIDE 17”x 16” Available with BP Dust Collector (shown) or Abrasive Separator Price: 1,395.00, W/ 400 CFM Collector: $2,275.00, Deluxe $3,250.00 (prices FOB factory,MI)Toolroom & General MachinerySandblastersnewrinco48Pawtucket, RIhttps://www.goldmachinery.com/listings/6152004-new-goldpro-trinco-master-model-48-cabinet-sandblaster25”52”64’THREE (3)380 LBS.$2,350.00,$50.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a67f9ce66218080d5e263a9855b462b/original-master48t.jpg2024-09-25 15:39:38 UTC6152005115V/1PH/60HZ Temperatures up to 5000 degrees F. Single torch model Uses distilled water and methyl alcohol Burns clean hydrogen & oxygen gas from distilled water Flame controlled by amperage setting and needle tip size Equipped With: 1 welding torch Manual Applications / Details This unique machine generates a Clean PinPoint Flame With Temperatures Up to 5000 ºF from a Pen Size Torch This unit is supplied with 1 torch. Very Safe - No Gas tanks needed Easy to Maintain No CO2 Emissions The Uses of Hydrogen & Oxygen Torches H2O torches are used for soldering and brazing and are proven to be useful in many industrial fields. Advantages of Hydrogen/Oxygen Torches Soldering with the gas generated by a hydrogen torch system is a better alternative to using the pressurized fuel tanks. The Hydrogen Oxygen generator produces gas by using electricity to break down the water into Hydrogen and Oxygen gas. Therefore creating a safer, cleaner and very economical gas flame with water as fuel. With hydrogen and oxygen as its fuel sources, the torch produces a much safer, hotter and cleaner flame. It's also easy to set up and very user friendly. Many small shops have restrictions on the use of gas tanks in their buildings. The H2O welder is a great alternative because it does not store any gas because it makes it on demand. Jewelry Making There are many reasons why those working on jewelry for commercial and personal reasons would use a hydrogen oxygen torch. They can be used for resizing rings, chain repairs and alterations, fixing damaged prongs or any soldering task needed. Annealing Hydrogen torches are great for annealing metals. When annealing, the metal is heated slowly to a specific temperature and then it is cooled slowly. Because this process softens the metal it can be shaped and cut easier. Glass Processing Hydrogen torches can be used for reshaping glass and metals. One popular use is heating glass colors together to build stronger, or different forms of glass. Medical and Dental Devices The hydrogen torch can also be used in the dental and medical fields, because it uses clean fuel and it won't contaminate medical or dental devices. The fine pinpoint flame is perfect for very small items like dental appliances, stents and guide wires. Plastics The torch can be used to flame polish edges of plastic sheets. Other applications include but are not limited to: 1. Thermocouple repairs and production 2. Wax castings 3. Electro-mechanical devices 4. Transformer soldering where a soldering iron can't heat the large conductors.Toolroom & General MachineryWeldersused3543-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152005-used-3543-300-sra-350-h2o-hydrogen-welder-for-soldering-and-brazing-includes-1-torch190 watts11" x 9.6" x 11" high50 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e5e198174ec135ad09f3e32ff18fc75/original-IMG_3309-2-e1631625195822.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b5881425c41fcd3efac48fba71e398b/original-IMG_3314-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90ddf2ded6a2dca8ccfdca314d8a8451/original-IMG_3309-2-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c4c0d7cbd9b9d12296c696e5d80c91f/original-IMG_3312-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea84323e2bd9b341f857d9712ba50604/original-IMG_3313-2-1024x768.jpg2024-09-25 15:39:48 UTC6152006MASTER MODEL 36 CABINET with BP Dust Collector. Designed for intermittent blasting operations. The BP Dust Collector vacuums the dust and, contamination from the cabinet. Media is recycled from the gun system to hopper and back to the gun system. FRONT OPENING LID-TYPE—3"’x 13" SIDE DOOR—17”x 11” Price $1195 W/BP Dust Collector (as shown), Deluxe $23065.00 (prices FOB factory Michigan) Freight additionalToolroom & General MachinerySandblastersnewtrinco36Pawtucket, RIhttps://www.goldmachinery.com/listings/6152006-new-goldpro-trinco-master-model-36-cabinet-sandblaster25”38”64”TWO (2)300 LBS.$2125.00,$2185.00,$50.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77e1c4e23df25c412198fb4dbeec3c49/original-master36a.jpg2024-09-25 15:39:38 UTC61520071125.0Inside Dimensions: Overall Dimensions: Dust Collector:Toolroom & General MachinerySandblastersnewtrinco30Pawtucket, RIhttps://www.goldmachinery.com/listings/6152007-new-goldpro-trinco-model-30-cabinet-sandblaster20”32”57 ½”One (1)30” x 13”14”240 Lbs.$50.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/163f3528a092caac13d5ff39f05fdf9b/original-trinco30.jpg2024-09-25 15:39:38 UTC6152008Wired on 208 Volts, 1 Phase Polarity AC/DC This superior TIG welder also offers outstanding stick welding capabilities, including the use of up to 5/32in. (4.0 mm) electrodes Simple-to-use, easy to customize design features an intuitive operator interface with select mode, polarity and begin welding settings AC Auto Balance® automatically provides for the optimal mix of cleaning and penetration when welding aluminum Bypass AC Auto Balance and adjust manually for full control when welding thicker material requiring increased penetration, or when requiring increased cleaning action to break through heavy oxide layers Wide 2 to 340 Amp output range helps you weld either end of the material thickness spectrum Squarewave TIG® 275 Welder features a wide output range that allows you to tackle either end of the material thickness spectrum. The Squarewave TIG® 275 is a versatile shop machine that's ideal for any type of TIG or Stick welding maintenance application, including the use of 5/32in. (4.0 mm) stick electrodes. Amperage Adjustments: 3, Amps: 2–340, Clamp Cable Length: 10, Dimensions L x W x H (in.): 33 x 28 x 38.25, Duty Cycle: 104/94/47A at 40%, 86/78/39A at 60%, Electrode Cable Length: 25, Power Cord (ft.): 8.5, Product Weight: 420.5 lb, Range Selection: 2–340, Regulator and Gas Hose Included Equipped With: Foot Pedal TIG welding torch High-pressure cylinder of inert shielding gas with a flow regulator Built in Digital Ammeter and Voltmeter for precise process control Link to Manual https://www.lincolnelectric.com/assets/servicenavigator-public/lincoln3/im609.pdfToolroom & General MachineryWeldersused5916-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152008-used-5916-300-lincoln-electric-squarewave-275-tig-or-stick-ac-dc-weldercleaning, penetration and pulsehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d51293eb6ce3b99d4d1bed05b9add85/original-IMG_8596-e1695734268385.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/163370b5d642b8e7a39b720e8c8a16d0/original-IMG_8597-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb6db70d1454ad876a4f21a351b6b178/original-IMG_8598-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43dc3e395c5fb16d07415657417768ce/original-IMG_8599-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c47b6e01ae4fd2918a6a601af0150396/original-IMG_8600-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d60de73f3475b325a042b266fb083a8f/original-IMG_8608-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63526a3344089f5efed083fd632edc00/original-IMG_8615-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e58cdd24bc9bef6d483f2f58aa2d0556/original-IMG_8591-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a12386a39d4c6fd0caa51aabf23485b4/original-IMG_8592-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35cf06765ad5c467b86497a4ce3588e7/original-IMG_8593-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ea4b2a664bf33ce1c90928d058fbbfe/original-IMG_8594-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a385072c01160c1d7bf8ee128113c6ed/original-IMG_8595-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/061ffc7c38e4d1212c31410845761c91/original-IMG_8596-1-1024x768.jpg2024-09-25 15:39:54 UTC6152009843.75This Bench Model is ideal for cleaning small parts. It has all of the features of a full size cabinet, yet doesn’t require the space. The system is rated for 14 CFM at 60 PSI. WIDTH: 21” HEIGHT: 38 1/2” FRONT OPENING LID-TYPE—20"x13" Dust collector included. Shown with optional work stand.Toolroom & General MachinerySandblastersnewtrinco20Pawtucket, RIhttps://www.goldmachinery.com/listings/6152009-new-goldpro-trinco-model-20-bench-type-sandblaster33”20”18”ONE (1)210 LBS.$50.$243.75https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ade191f726d53e8306a666d67a35086/original-trico20.jpg2024-09-25 15:39:38 UTC61520101475.0Front opening lid-type 24" x 15" Skid size 40"/48"/55" weight 265 LBS class 150 Equipped With: BP Dust collector Rubber gloves Blast Gun with nozzle Standard Model 24 Cabinet with BP Dust Collector. Designed for intermittent blasting operations. The BP Dust Collector vacuums the dust and contamination from the cabinet. Media is recycled from the gun system to hopper and back to the gun systemToolroom & General MachinerySandblastersnew24/BP2Pawtucket, RIhttps://www.goldmachinery.com/listings/6152010-new-goldpro-trinco-model-24-bp2-18-x-24-sandblaster18"26"62"18"(1)$50.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5a735255a8c3332ed56e6c0776b8f9a/original-9446.jpg2024-09-25 15:39:38 UTC6152011Year of mfg 1979 S/N 793140 Equipped With: Series 1 Hydraulic control, 3rd Edition New Vari speed belt / bearings and brushes Original Operator Manual and Parts List Heavy duty Caster wheels 45° Swiveling Vise Chip Pan Stock Stop bar assembly Note: New Hydraulic Seals installed on 6/18/2017Toolroom & General MachinerySawsused4466-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152011-used-4466-600-w-f-wells-9-x-18-w-9-double-column-horizontal-band-saw-series-1-hydraulic-controlRectangular 9” H x 18” W, Round 9”2,000 lbs70-380 SFPM1”11’6”Carbide with Backup RollersManual14½”Manual Blade Powered Cleaning Brush30-120 lbs16” in 18 Seconds16” in 12 SecondsHP, 1 ph26”10 Gallons990 lbs43" L x 81" W x 63" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efe958003e0bca348d169a3f61135d23/original-IMG_2146-e1619702734833.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d81d44bec51d1a3532d915cb4edf481c/original-IMG_2160-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5358f3034fa1982ea25c1d9c7b6abe31/original-IMG_2146-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/716f0318d5a224089d01765754f8be35/original-IMG_2147-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4f912ed6bc67fa23f89a93f0ce5d782/original-IMG_2148-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d21b72f55c28f67e066ac7a52b64fee6/original-IMG_2150-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f41dc2a694cb5c3e70b53440bd9c9e94/original-IMG_2151-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ed8fa99c5fbc6ef070b80251cea1956/original-IMG_2152-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbe2b1d63d43b800d18dff001e1ef531/original-IMG_2153-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4750b6fd6a2cf405bbf5c01564eb609/original-IMG_2154-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb0a30b4e48a0b98033e52ed8efb213b/original-IMG_2155-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73ff29a887380e6960d4f15a72ed275f/original-IMG_2156-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df79601e2d2d25fed89c7b56c7633aa5/original-IMG_2157-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a15646701a908726b59b5567113b813/original-IMG_2159-1024x768.jpg2024-09-25 15:39:46 UTC6152012Voltage ‎115 1ph 60 HZ Horsepower 1/4 Amperage Capacity ‎1.8 Amps Maximum Rotational Speed ‎3450 RPM Model Number AS-130M Style ‎5” Disc/1”x30” Belt Sander Approximate Weight ‎18 pounds Approximate Dimensions ‎15" x 12.63" x 14.63"Toolroom & General MachinerySandersused5954-590Pawtucket, RIhttps://www.goldmachinery.com/listings/6152012-used-5954-590-1-x-30-belt-5-disc-sander-1-3hp-polish-grinder-sanding-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/133d35f13d08c1ce3e103cd8003a7783/original-IMG_6975-e1675102851725.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea28afabedb028d0106814d390d8e6b0/original-IMG_6976-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4d3cece18ff587523b61fdbb502fd1d/original-IMG_6973-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3c23d9bc8e589c5842a40efb52b0050/original-IMG_6974-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad3e3b480aa0feb631d79366ed645e6f/original-IMG_6975-1-768x1024.jpg2024-09-25 15:39:40 UTC6152014115V/1PH/60HZ Temperatures up to 5000 degrees F. Single torch model Uses distilled water and methyl alcohol Burns clean hydrogen & oxygen gas from distilled water Flame controlled by amperage setting and needle tip size APPLICATIONS: Soldering & brazing, welding, drilling, spot annealing of small parts in all metals. Used in industries such as jewelry, electronics, dentistry. Also ideal for polishing plastic.Toolroom & General MachineryWeldersused2251-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152014-used-2251-300-model-sra-250-h2o-welder190 watts11" x 9.6" x 11" high31 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c427b39157e5afc94cb85634b26a444/original-2251-1-MAIN-e1464092391360.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4b10c23f5ea64849ccbb0722cd4863c/original-2251-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/833de8c62ea7b10cdfb953378d55be1e/original-2251-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5082639e0aede21535de73ec24813e08/original-2251-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b3f16c69dbb5c7b7bbce6cf1a3dfceb/original-2251-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/706f06d5e388e4ef2d3b02e4e8064e2d/original-2251-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98170c093d8afeab08e26136cd6de21c/original-2251-5.jpg2024-09-25 15:39:51 UTC6152015110/220 Volt / 1 Phase / 60 Hz Table Size 20" LR 27"FB Overall size 40" LR x 27" FB 38"H Equipped With: Factory StandToolroom & General MachinerySawsused3359-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152015-used-3359-600-10-powermatic-artisan-table-saw-20-x-27-model-6318/921-1/2 (1.5)3400110 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adf7b82c628147bf4477a71c41ee78c3/original-1-e1591362452835.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e6ee495ee5d266f11df0bff5b9fb99a/original-IMG_9370-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85ea8ecdbe5484eecb6212198ca93e6e/original-IMG_9372-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16275e5e56ef31d2584e4ddbea6bef90/original-IMG_9373-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e32dd15c9a80be14fdac749ce5ac0b3e/original-IMG_9374-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53b15fc88207bf4c041c1fdb13000e6f/original-IMG_9375-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01703ade80bf16499270367cd615cc0a/original-IMG_9376-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b642041f1e2b21fbfc966cc7c06c859/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3713c781dad1eea867721d8d4361a9a/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6561ddf274bcf9ab1f3141ad96aa5e5/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf3bd964f16e202c07e0a8affae32ad9/original-IMG_9364-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15a2de3dfc27c5c0d226a19af3549bc7/original-IMG_9365-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ec677f7a48ac962630f7dddfa8fbf4b/original-IMG_9368-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4455ba90956641784557a650d939e61/original-IMG_9369-1024x768.jpg2024-09-25 15:39:46 UTC6152016110V/1PH/60HZ Consumed fuels: Power input: AC-220V +/- 20V or AC-110V +/- 10V Electrolytic cells: 2 - electrolytic cells, 1 - water feeding cell Auto pressure controlling device: Pressure higher than 0.18 mpa, switch off Pressure lower than 0.14 mpa, switch on works well, makes mixed hydrogen oxygen gasesToolroom & General MachineryWeldersused2633-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152016-used-2633-300-microflame-water-welder-model-205-t200 lit./hour3000 deg. C.60ml/hour(no mineral water)800 w/hour3800 mlyesIf showing 12A - 14A, machineNormal working pressurefrom 0.14 mpa to 0.18 mpa52 x 30 x 53 cm15 kg ( 33 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7775f95458f1d95b1b49b589fa5dde/original-2635-21-e1515503404248.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95ecc8410f271e227e3a9510ae68b3f9/original-2635-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ca67d7bad4ab38a60db145702dbef7e/original-2635-3-1024x616.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e70979bc7e2c4375ee699ae318064478/original-2635-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57c985b5554a9c2e0870cba455107af4/original-2635-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa831004aa451dd5e77488fa275b42a2/original-2635-5.jpg2024-09-25 15:39:49 UTC6152017110V/1PH/60HZ No torch or gas tanks needed Up to 2000 degrees F Demagnetizes watch movements, small instruments and small tools Low voltage unit is shock resistant Used for soldering rings, jewelry, spectacle frames or any piece where hard or soft solder is needed. Heat range accepts soldering for very light to heavy items Heat is produced electrically, without flame Carbons are copper plated to insure good contact. The large carbon holder can be adjusted to use carbons both horizontally or vertically.Toolroom & General MachineryWeldersused2497-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152017-used-2497-300-procraft-bench-type-soldering-machine-model-54-050100010-1/8" x 6-3/4" x 4-1/8" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a4e0a87c01afe9242770cd69829e442/original-2497-1-main-e1492169541475.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65e4b1181a7d06940ea5e51fc025164a/original-2497-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b55632f407fc6276a4dc9ff7650323f/original-2497-1-main1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29b0f5eafb557735585a77ca3ccd2611/original-2497-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1041c639ef48ea9946cac766172ffa0/original-2497-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/703c7e31062dedf86dff7465758e8c0e/original-2497-4-1024x768.jpg2024-09-25 15:39:49 UTC6152018Voltage - 220 / 3ph / 60 Hz Year 1982 Model 462 RPM 1400 u/m Pulley - Speeds 680 / 980 / 1110 /1570 u/min Overall size - 28" x 36" x 74 " H Equipped With: Ecc8 pneumatic control 2" vise Full enclosure 3" diameter cutting bladeToolroom & General MachinerySawsused3404-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152018-used-3404-600-robert-speck-germany-tube-and-part-cutoff-saw-mill3"3"  x  10"  x 1/2" T Slotshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4485a4cfcc4019a06aeaff23fdad03ac/original-IMG_26651-768x1024-e1594392197216.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2080e852d0691da648ee942e447c63a/original-IMG_26642-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d24003f8dfa88ce02ab8042496e17161/original-IMG_26651-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b73d77d25a1dcece3010deab0d1db2b4/original-IMG_26671-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcebf36fa6bfef98d30397692c9a9c95/original-IMG_26681-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c24975e65df690bc2b228b1b814999c1/original-IMG_26691-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6848fc2b8ec7364be8fde2187bcbbfc/original-IMG_26741-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4e5c81058a7312e492880629031cc52/original-IMG_26761.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f08348b77e867974f4fba2c01cc9fddb/original-0023-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6cd4e49980e526130daabafa58e61663/original-0051-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83c14fc6a5d073d1228a7b849a4553b2/original-0071-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12e41692892a616cd319d85b59fe73c7/original-0082-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d3c616b5958114ca373f3a2732c4a85/original-0092-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed9f0b291896aad4cada6d8c5d5c3304/original-0102-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a9796114c31df895839f39bb3d7c2f7/original-0112-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45500ce4d0a878e6fd0b10bd591fc8ee/original-0121-768x1024-1-768x1024.jpg2024-09-25 15:39:50 UTC6152019With 16" Hand Saw ( 12" Blade) Has notches to mount on a work benchToolroom & General MachinerySawsused2661-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152019-used-2661-600-stanley-mitering-attachment-for-hand-saw-model-h114a30-45-60-75-90 degreeshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a90886e67969db2cbfc62c2778d634ed/original-2661-1-MAIN-e1518614584106.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b2adc6323ec8b3ccab327e468ff8162/original-2661-3-1024x979.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b92857e1e65e89391bd199ffbf3082c/original-2661-1-MAIN1-908x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e0f4aa0635eade64e6745b8534fcfea/original-2661-2-948x1024.jpg2024-09-25 15:39:42 UTC6152020Indicated for general use on goldsmith's work for full tub's cut and plate of different form. The saw is assemble on the inside of a metallic tank and protected by a plexiglas protection. The table is grind and tip-up in order to substitute the blades. An emergence button and a micro switch on the lifting guarantee the safety of the machine. On the pulley is possible change three gear. Availability: Ex-Factory, Italy Check the latest exchange rateToolroom & General MachinerySawsnewcircularsawPawtucket, RIhttps://www.goldmachinery.com/listings/6152020-new-tvn-circular-saw-on-the-tank-mod-sahttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/62a54fe84f0612b367b7fc161ec5d704/original-circularsaw.jpg2024-09-25 15:39:42 UTC6152021110-220V/1PH/60HZ Wired for 220 volts Capacities: Equipped With: Bar stock stop Chip pan Coolant nozzle Coolant panToolroom & General MachinerySawsused2556-600Pawtucket, RIhttps://www.goldmachinery.com/listings/6152021-used-2556-600-delta-rockwell-9-x-16-horizontal-cut-off-bandsaw-model-20-9169"3" x 16"/9" x 13"6" x 8"129"(l) x 3/4" (w)4-step pulley50-125-200-275 RPM14" diameterhydraulic cylinder operated by needle valveroller1 HP30"(W) x 70" (L)650 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bf4f5477754b052d07d2b45219fc869/original-315-e1509376884673.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/910c8c4c06a28f4354b2bbbe544473d7/original-3242-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b112234e4dcc7fdfaee8179fb182e69b/original-3251-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1e0cc3504c150822db950ce3d31e804/original-3261-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f7d1e712023ef786a635e0a8ec161e6/original-3151-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a1bc4257a57816a6f449eb192d484e7/original-316-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/951f3853206d7a555d1250880de3fd5a/original-323-1024x768.jpg2024-09-25 15:39:45 UTC6152022220/380 Volts / 3 Phase / 56/60 Hz Equipped With: Assorted Turret Tooling For The Eyeglass Frame Industry Assorted Die/Hammer Spacers Hydraulically Operated Feed Unit Turret Magazine for Bars & Tubes Muller Catalog about Rotary Swaging, consisting of: applications,advantages of rotary swaging, methods, etc.*** Special Note: Operating and parts manual available from the following factory contact: Heinrich Müller Maschinenfabrik GmbH Email: n.pless@hmp.com http:www.hmp.com Current similar machine replaces today at $27,400.00 ***Note: Download the Rotary Swaging Instructions by clicking Here!! Additional Photos:Toolroom & General MachinerySwagerused0623-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152022-used-0623-140-muller-model-r2-ha-rotary-swager-swaging-machine-65-capacity2 Bar (wire)1.0 - 6.0mm (.04-0.25")1.0-16mm (.04" - 0.65")34" x 70" x 58"3880 LbsD-75179 Pforzheim, Göppinger Straße 1-3, GermanyNathalie Pless+49-(0)7231-3199-123+49-(0)7231-3199-11https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1a34eac3ee1624dec7fc3c60c9d9b06/original-0622-1_0.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e9d90870fb6d2da7a4c6b0aa1ab9a21/original-0622-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dade9851f8638c244f1df38d227a25a5/original-0622-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b035871d6459f0814550ed0c0dd7e63d/original-0342-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3650424ea1c037e3f98821305c5265e/original-0087-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/072ff65831371d7220e8ae119b942162/original-0224-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1eea6266b900ac59ed3756d937bd061/original-0234-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fedd51feb549ceacff3fc59a8b9abc58/original-0265-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12ff7bbc22fe360eccb0d56c3e096da1/original-0274-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15dffadb65f0b7b5a977780739edc244/original-0303-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a0c283321a1d8c1658f702e3608f273/original-0322-1024x768-1-1024x768.jpg2024-09-25 15:39:49 UTC61520237285.0It is suitable for heavy uses on goldsmith's works and for cutting solid tubes and plates of different forms and materials. The supports on ball-bearings allow the cutting of hard materials. The saw is assembled inside a metallic tank and protected by a plexiglas protection. Grinded and overhead table in order to replace the blades. An emergency button and a micro switch on the lifting device assure the safety of the machine. Through pulleys is possible to change three speeds. With a lubricating system that allows the tool in working to keep his characteristics of duration and precision and the piece in working to obtenir an exact and uniform cut. Construction standards in accordance to "CE" with respective documentation. Installed horse power 0,33 kW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 850 mm Width 500 mm Height 1000 mm Approx.Weight 140 kg Availability: Ex-Factory, ItalyToolroom & General MachinerySawsnewslcPawtucket, RIhttps://www.goldmachinery.com/listings/6152023-new-tvn-mod-scl-circular-sawing-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ae7507204153dd46dae4dc9c272f1db/original-scl.jpg2024-09-25 15:39:42 UTC6152024Cut is made by circular saws in HSS or in tungsten carbide with maximum diameter 125 mm and thickness from 0,5 to 0,8 mm. The machine cuts solid and hollow bars of any type of moulding and material, rectangular 32x14 mm (max), square 16x16 mm (max) and round 19 mm (max) with cutting precision +- 0,04 mm. Maximum cutting length 90 mm. The vertical motion of the sawing group happens through warm and roller linear steerings. Chuck with high precision bearings and saw linkage diameter 22 mm. All movements can be adjusted: Forwarding feed. Working stroke and forwarding speed. Speed of the saw-unit rotation. Extra-stroke for saw replacement. Technical Data: Working cycle regulated by a microprocessor. Pre-setting of the cuts’ number. Closed circuit lubrication with filings separation. Dimensions: Length 700 mm Width 1000 mm Height 1600 mm Approx.Weight 360 kg Diameter drag coiler 400mm ( 15.75" ) Notes: Construction standards in accordance to “CE” with respective documentation. Optional: Suction on the cut. Micro-lubrication. Roller bearing in input. Installed horse power 1,5 KW. Power supply 380 V. 50 Hz. Three-phase + N. 3° shoulder € 2.078,00 Equipment for straight cuts with locking – piece € 1.089,00 Equipment for inclined cuts with locking – piece € 1.089,00 Two locking - piece (undersaw block + feed) € 299,00 Electronic variation of speed € 1.590,00 Availability: Ex-Factory, Italy Price: € 32.601,00 Listed price subject to manufacturers price increases without notice.Toolroom & General MachinerySawsnewsa-2Pawtucket, RIhttps://www.goldmachinery.com/listings/6152024-new-tvn-automatic-sawing-machine-mod-sa-2€ 476,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/033bd66504522e6746abcf612bad9738/original-SA-2.jpg2024-09-25 15:39:42 UTC6152025The machine cuts circular tubes with maximum diameter 35 mm and variable thickness from 0,5 to 3 mm. Cutting size with precision and constancy 0,05 mm. Locking of tube by pneumatic chuck with three jaws completely automated. Feeding of tube is made through a pneumatic pincer with two jaws with maximum cutting stroke 100 mm. Cut with circular saws in HSS or in tungsten carbide with maximum diameter 70 mm and thickness from 0,3 to 0,8 mm. Saw chuck with oblique, precision and high speed bearings, and saw linkage diameter 10 mm. Through a control terminal “touch screen” it is possible to settle all the cutting parameters and adjust all the movements of the machine. These parameters can be called again, modified, saved and used again after years and years. Pre-setting of the cuts’ number. Closed circuit lubrication with filings separation. The machine has an input support with rollers and adjustment of the height to put right in the centre the tube. Technical Data: Dimensions: Length 1200mm Lenght with support 2600 mm Width 1200 mm Height 1300 mm Approx. Weight kg Notes: Construction standards in accordance to “CE” with respective documentation Accessories: Suction on the cut. Micro-lubrication. Installed horse power 1,5 KW. Power supply 400 V. 50 HZ. Three-phase Serie guide per tubo 228,00 € Series of guides for tube Series of jaws for chuck (3 pieces) 457,00 € Series of pinces for two pieces 257,00 € Guide bar in entry 3.999,00 € Circular saw diameter 63 HSS ------- € Circular saw diameter 63-tungsten carbide ------- € Availability: Ex-Factory, Italy Price: € 25.434,00 Listed price subject to manufacturers price increases without notice.Toolroom & General MachinerySawsnewSA-T35Pawtucket, RIhttps://www.goldmachinery.com/listings/6152025-new-tvn-automatic-sawing-machine-for-tube-cutting-mod-sa-t35€ 331,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7e218526328724ab3e3425dad3452fd/original-SA-T35.jpg2024-09-25 15:39:42 UTC6152026115V/1PH/60HZ Equipped With: Solid state timer controls Foot pedal Note: Used for welding dissimilar metalsToolroom & General MachineryWeldersused5653-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152026-used-5653-joyal-model-2-2-kvadk-resistance-spot-welder2.2 KVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4402880b1ba659225def7feeeb236690/original-5653.jpg2024-09-25 15:39:48 UTC6152027Floor model Hand operated C-frame style Est Weight 675 LBS Equipped With: Cast iron stand Counterweight Die dish Tool Holder DIE HOLDER HOLD DOWN CLAMPS NOTE The machine has a small brake off the top lever, however the machine is fully functionable.Toolroom & General MachineryScrew Machines, Hand & Autoused5929-490Pawtucket, RIhttps://www.goldmachinery.com/listings/6152027-used-5929-490-e-a-adams-model-2-reynolds-machine-co-hand-operated-stamping-forming-screw-press-fly-press5-1/4"3"7-3/4" x 11-1/2"2-1/2"21" x 32" x 59" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27105045be0322f8b952e171091254be/original-IMG_8026-e1689006521615.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39925f95c10ae36622e92c5e0b4e3767/original-IMG_8031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca8e17ab82088868ae1f7ac6a055bc03/original-IMG_8030-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80c02dc9c082337eb9887cd7e3f83c10/original-IMG_8029-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb8b92046dd10f84f420c872895bc294/original-IMG_8026-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/106c9c8c81b87f3fa29ce22f2922b47f/original-IMG_8027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66776f26c9fe14f35c65ca860cb4eed6/original-IMG_8028-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53b8c35ff7b4ea51839d04172824706e/original-IMG_8033-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4f8fd7f26892d2faeb0254274c1b4f2/original-IMG_8032-768x1024.jpg2024-09-25 15:39:47 UTC6152028Circa 1860 Hand operated Equipped With: Pull out drawer 12-tool holder - assorted 19 - gear cutters - assorted 1 - wrenchAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused2077-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152028-used-2077-385-antique-clock-watchmaker-s-topping-tool-rounding-up-tool-circa-18606-3/4"8" x 5-1/2" x 1-3/4"10-1/2" x 5-1/2" x 9-1/2" H6 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c20adc35cce99d32dfeb6ce0aab82d92/original-1-e1452094134545.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/703e25258414e29c2caf3cdba5fb4b13/original-6-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57b05e26855d3279a0a32fa4e8ca7fd0/original-11-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/caf7238345a9969b4c3487f9afdf278f/original-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7c190369112ecec6c0ba8e906ab661d/original-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1403e973523dda3165817b181c875711/original-4-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/753b21e90db114c346a28d140a6abf3c/original-5-1024x768.jpg2024-09-25 15:39:54 UTC6152029Voltage 220 volt / 1 ph / 60 HZ Year of MFG 1996 welder Model # LJG-5 5 KVA Welder Equipped With: Material clamping device with water cooled tooling blocks Joyal 85M ~Micro Processor Welding Control SN W-96025 Controls dwell time and percentage of electric current ABOUT Joyal Products, Inc. was founded in 1947 and was acquired by Alliance Winding Equipment, Inc. in 2004. Joyal is the company and brand that developed the patented fusing technology for magnet wire and has continued to be a leader in the industry while at the forefront of the technology and automation. Joyal has developed many specialized machines in magnet wire diffusion bonding, resistance staking and solid state brazing focuses and offers a full line of equipment including stand alone, rotary and bowl fed machines that can be incorporated into any production environment and be run manually or automatically. Joyal gives your application an unsurpassed connection technology. Wire to Wire Wire to Lead Wire to Terminal Wire to Commutator All of the equipment will eliminate the enamel preparation and can process copper, aluminum or Litz wire. The Joyal machines offer state-of-the-art controls for speed, repeatability and monitoring of the process that can be accumulated and tracked in an SPC database.Toolroom & General MachineryWeldersused1341096178731w1975-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152029-used-1975-300-joyal-mdl-l1g-5-5kva-butt-welder-with-joyal-micro-processor-welding-controlhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b78657e5022bd3e9e3d6f78971419fde/original-0012-e1503671650739.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/609b3bfdf4fb0d618aa28e80c067b281/original-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19ecd6c8d23836ce9275455610a47b72/original-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ca9a4189e1c402c7d472e12c0baac7a/original-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63ca4a27bcfd306e9f2f63cbf3b55636/original-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d184124ac061edbbcbbb345a40bf849/original-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3df1715dd391bc480289876f953a985c/original-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46bb750e00301133fe59d5088edb3037/original-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a56b6ae6cfa1b58668acb11c503f700/original-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edf39a3e091c1b1a18701121d9b26759/original-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ceb49812c186fdf60f1309fe6f523f77/original-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f198dd53f762cc01cd242c9080ff150/original-011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1c22bd8e73e3221aac2d13937489112/original-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e58eb44393b1e1707e2bcc9fab52a337/original-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00ee7c4f2e08dfc948799c5c3bab518a/original-015-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4cf0e41d5745d97c3b859cbde4ad6a1/original-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e55948c5590af65ed3a3837a5addf25/original-017-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b23dee716a48c65a3390acc01d2e3cee/original-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/213504986b1f05f1dc917cc1dbc435f4/original-019-1024x768.jpg2024-09-25 15:39:59 UTC6152030550V/3phase/60Hz 2 Die Type No Hole Through Spindle Floor Model Cleaned & PaintedToolroom & General MachinerySwagerused1349-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152030-used-1349-140-langelier-no-3-rotary-swager-3-16-solid-capacity2"long x ¾"w x 1½"h3/16 Solid2hphttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cf373b0794e9757c763b4072d8402e1/original-1349.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee54de239db2e528495497cb41ab6846/original-f1-019-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05d66be22f486e7d21183c0718fde6c4/original-f1-021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c9016c4f46a6891b6bdd4ca026344c7/original-f1-022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c9981055142c91321252ce9d1f0909b/original-f1-024-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64a0cf71f10e75d2c78909290b9cbd29/original-f1-027-1024x768.jpg2024-09-25 15:39:46 UTC61520312 - Rolls .142" wide flat All rolls adjustableAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused19874-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152031-used-1984-140-four-4-roll-independent-turks-head1"7".058" wide flat5 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/777dc01c68bb6e5da8a2f08d16e18b47/original-1984-1-MAIN-e1449503192235.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c9e19b36765ea56e95d0dbeb6255a2f/original-1984-4-1024x990.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68c846663836b053a78955ff61a0c5d7/original-1984-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8467e7d34e207ef81e701756c4e028e/original-1984-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7099b5ea8d7962081f05598a475a5279/original-1984-3.jpg2024-09-25 15:39:56 UTC6152032MADE BY WALTER KRETZSCHMAR (THIS IS AS CLOSE AS WE COULD MEASURE) 3-Jaws are universal adjustedAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused3155-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152032-used-3155-385-antique-3-jaw-chuck-with-adapter-for-guillochet-engine-turning-machine2-3/4"1-7/8"1-3/8 - 10 TPI2-1/2"3-1/2" X 5"3-1/2 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdf75388c3a1075d2976308d182ba2fd/original-3155-1-MAIN-e1557924765567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de7f12c7a04c368392f2cf85f3c08e4c/original-3155-3-1024x720.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17953497581ea13c7c4a93a012a1ed7c/original-3155-4-606x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08d7c647630cdcfdbf21a419cd8efb4f/original-3155-5-1024x1004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be85457a32f9e08bf241660827540321/original-3155-6-1024x414.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ef1246cfe8c3a34119fdc2d0830bcd1/original-3155-1-MAIN-1-975x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac4d04613d3470098dc14b6cfbdd2fa1/original-3155-2-1014x1024.jpg2024-09-25 15:39:53 UTC6152033Overall dimensions lathe and base: 18" x 7-1/2" x 9-1/2" high Equipped With: Adjustable tool rest Rawhide drive beltAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1497-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152033-used-1497-385-american-watch-tool-boley-type-watchmaker-s-jeweler-s-lathe4"4"10"3-1/2"413" x 3-1/2" x 7" high18" X 7-1/2" X 2-1/2" HIGH14 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f145a7610a824d72558580a86f52ca5/original-1497-1-MAIN-e1430307242700.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f081995418b245f94e5cfab50bf2202e/original-1497-81.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/513ab084d3b7c800513378c6cecee2ab/original-1497-1-MAIN2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a584c969dffdedfd0a04d6615c3056cb/original-1497-21.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/322957ff1f2875f824ff413fa6ef5d89/original-1497-31.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0e45b5665d1c7b955d1fbee0a78ea8d/original-1497-41.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e30c188509a14e905044b935c6dcefee/original-1497-51.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2510d47ed1dd4ae9e01430aea89947ab/original-1497-61.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/136d33fea024438c4d2be020fc4a9290/original-1497-71.jpg2024-09-25 15:39:59 UTC6152034Used for pens, barrels & other cylindrical objects Adjustable indexing lever All steel constructionAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused3185-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152034-used-3185-385-antique-cylindrical-tube-pen-attachment-for-straight-line-engine-turning10-1/2" x 1-1/2"2-3/4"7/8" diameter6-1/2"12-1/4"(l) x 4"(w) x 4-5/8"(h)5-1/2 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38d759df78497720911658f4a3561676/original-3185-1-MAIN-e1564430831336.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dd9cd123ac06b0459051d049ec30d0e/original-3185-4-1024x993.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0d216511737b44353a171592e4b9cab/original-3185-5-780x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc8e642d0d8e863f24a3238a65a60589/original-3185-6-841x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9ff2dd3a33eb4e91a520814d5e62988/original-3185-7-1020x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a3ebb26cc0ae7c20e5492683909a831/original-3185-8-1024x675.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f82fe90c9062c4446c1292532a4d4fe/original-3185-1-MAIN-1-1024x549.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59a1c423ec629d9ad0cff2e0027c0150/original-3185-2-1-953x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ade4173b1f305201dad5b91f56a8d631/original-3185-3-858x1024.jpg2024-09-25 15:39:54 UTC6152035250V/3PH/60HZ 100% duty cycle Equipped With: Miller #XRW extended reach water cooled wire feederToolroom & General MachineryWeldersused6785-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152035-used-6785-300-l-tec-250-amp-mig-welding-system-model-vi-252-cv-s-n-b87g-75202

250 amps

4430/15 ampshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd1e69f9d30ed2e4b60e60faf88563bf/original-w-011-e1362774031142.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0071acdc2cd76c20e6dbf40250f17972/original-w-022.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84d325c9c37fc4ae8d3424064ccf4712/original-w-021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32aa927be18a93e93495a11605320009/original-w-020.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/533532fa50479bdd3f050a3b8ec0ecc5/original-w-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a800997dd316cbd6e795e61985649949/original-w-016.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b4d48817a4e07376a32168f33a9dbf4/original-w-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e085bc56dcb56e362e338d6fd1dc288/original-w-0111.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea087adfe5381d29dec990a2d450c428/original-w-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/943182b56de8417a14755b2ab7a37b91/original-w-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e19ff30dc66a121395d56adf767dd44/original-w-008.jpg2024-09-25 15:39:54 UTC6152036110V/1PH/60HZ Equipped With: Solid State Timer ControlToolroom & General MachineryWeldersused5670-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152036-used-5670-used-joyal-model-dk-2-2-kva-resistance-spot-welder2.2 KVA2024-09-25 15:39:52 UTC6152037110-208V/1hp Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2604-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152037-used-2604-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16714625999f2a947637138a28c1c7bc/original-2604.jpg2024-09-25 15:39:49 UTC6152038110-208V/1hp Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2605-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152038-used-2605-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48fdba606ed875c3cb51883d7e55a19e/original-2605.jpg2024-09-25 15:39:49 UTC6152039Machine is used to re-cut gear wheels Hand operated BREVET 35468 Switzerland Lever operated vertical movement Equipped With: 18 - Assorted gear cutters 18 - Assorted tool holders Mounted on wood base with pull out drawersAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1419-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152039-used-1419-385-antique-topping-tool-gearwheel-cutting-machine-jeweler-s-lathe-circa-18606-1/2"12" x 7" x 9" high8 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b852751e20650c7aafc9b010c7c1428/original-DSCN1862-e1428001022946.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9d56d888df129511f8899c118b5219f/original-DSCN18621-942x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d90de42c670621ae81a8532a0a61dd27/original-DSCN1863-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c51f048466587675b6bd6b8455349b3/original-DSCN1864-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/feaa66fb940f2c45d6accd47e90fb927/original-DSCN1865-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/466e2c72d07afbf94e91408924a4732b/original-DSCN1866-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cecbe8e3e6ba19fe9863ca4048f1db05/original-DSCN1867-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f770cf991bf69a5536c329940aa2cb2b/original-DSCN1868-1024x768.jpg2024-09-25 15:39:59 UTC6152040Reconditioned Circa 1900 AntiqueAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused0286-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152040-used-0286-385-antique-r-blundell-hand-operated-slitterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1adb167d67491bd4dcbc86f27b9fe82f/original-0286.jpg2024-09-25 15:39:55 UTC615204154 Tools Total Turned wood handles -Walnut and Beechwoods Assortment of steel profile edges marked Holtzapffel & Co., all in a hinged mahogany Paneled cabinetAntique Machinery & ToolsEngine Turning & Brocading Machinesused5982-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152041-used-5982-385-antique-holtzapffel-co-ornamental-lathe-54-turning-tools-chisel-set-london30" x 31"15" x 31"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a28f8c83ef46d3876587393142897436/original-IMG_6045-e1661448705295.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1ec1ff65fa2b9c18e0e3dd58d3e1d62/original-IMG_6051-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ed4e10863c4d96ea752090002505efb/original-IMG_6045-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45373b715910bdffd73eb5eb8939995a/original-IMG_6046-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f00ca4c6eaae140151ee1cac3bb72df/original-IMG_6047-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/916628d09c73426170f00dcc5adfcbb0/original-IMG_6048-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cf1e201cb7f8111786b6679fea28c1d/original-IMG_6049-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dce542493b392305785dae103f5de35e/original-IMG_6050-768x1024.jpg2024-09-25 15:40:02 UTC6152042Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2608-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152042-used-2608-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3617fe8670a1276f19b87ccef1c4bb2/original-2608.jpg2024-09-25 15:39:49 UTC6152043250 Sets Some with KeysAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1763-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152043-used-1763-150-250-sets-of-slitting-forming-rolls1/4" to 1¼"2½" to 3½"1" to 1½"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be866de829139ae933cf7b564d2e0a7e/original-1763.jpg2024-09-25 15:39:55 UTC6152044Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2609-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152044-used-2609-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c16ebea639970167bc6d4ecc1689f7d7/original-2609.jpg2024-09-25 15:39:49 UTC6152045110-208V/1hp Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2606-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152045-used-2606-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bb7878b0667ac3c49ada6c610ac39de/original-2606.jpg2024-09-25 15:39:49 UTC6152046Equipped With: Solid State Timer Control Foot PedalToolroom & General MachineryWeldersused2941-300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152046-used-2941-used-joyal-model-2-2-kvadk-resistance-spot-welder2.2 kVAhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/092033205499ce54a13e2db0222771f3/original-2941.jpg2024-09-25 15:39:49 UTC6152047Equipped With: Rotating Face Plate with Center and (3) Lathe Dogs X-Y Adjustable Crosslide Headstock Crank Handle Wood BaseAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused5679-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152047-used-5679-385-antique-watchmaker-s-bench-lathe-switzerland-circa-18604-1/2"18" (L) X 8" (D) x 11" (H)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e79f15056262c122158511c49e3f123b/original-5679-1-MAIN-e1563977880795.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bce91e1de60eee512832540457e2908/original-5679-1-MAIN-1024x605.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82d6b63c553ee930e9f8895280d3eed7/original-5679-2-735x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5feff52327fdb5298f3bd6702cc5b428/original-5679-3-994x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4748c071cb64f2e762d5100c374fac2d/original-5679-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76502b3e6d387029ccb0e6f5427f3f80/original-5679-5-695x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e7cbf781e3efafe617af6c6d1f87b6e/original-5679-6-1024x417.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1339c2dd7d68381eedf1038cf52beaaa/original-5679-7-553x1024.jpg2024-09-25 15:39:59 UTC6152048Hand operated Machine used to re-cut gear wheels Equipped With: Solid wood base 18 - assorted tool holders 2 - extra gear cutter holder assemblies 17 - assorted gear cutters 2 - extra needle arbors Wood storage case for accessoriesAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1174-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152048-used-1174-385-antique-topping-tool-gear-wheel-cutting-machine-circa-18607"13" x 7" x 9-1/2" high10 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1fef79e7824cc3249ed6514f5a492099/original-1174-1-MAIN-e1432643040762.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b170f389112d16256533c6dcaf1a322d/original-1174-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d84779764a5ca6767e91ff771bdbc3a1/original-1174-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fac300ee4e396ab36bffc0daee29316f/original-1174-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ab4a33f9b94e1be71e538977c8005b8/original-1174-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c72c8553e18a31d4d91bc5a51afd89f1/original-1174-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bae93c9c522bbc3eda55b0abcab7139/original-1174-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b77d97ebbaad9114a5c18d929c4c9fda/original-1174-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c679d37e075229db0aa6707fce10f2ea/original-1174-6.jpg2024-09-25 15:40:00 UTC6152049Manufactured Circa 1850 in London England by W. Mills Company.Antique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused5405-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152049-used-5405-antique-watchmaker-s-bow-lathe21" x 6" x 7 1/2" highMahogany base with brass fixturing and partshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0df6ac336f9f18cc9e28328b9a3de09/original-5405.jpg2024-09-25 15:39:55 UTC6152050Bench Model Equipped With: Material Entrance Table Synchronized Roll Adjustments (less motor)Antique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1759-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152050-used-1759-antique-slitting-machine-circa-1920https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e517d1c26b4d0cccd8128cbd9e6f948/original-1759.jpg2024-09-25 15:39:55 UTC6152051Circa 1860 Equipped With: 3 - lathe dogs Ornamental metal standAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused2468-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152051-used-2468-385-antique-bench-model-watchmaker-s-hand-operated-lathe4-1/2"4"5"2-5/8", adjustable4-5/8"7"18" x 5-1/2" x 9-1/2" high15 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b69ea2962e0d18fa96ce39475fcece9/original-2468-1-main-e1486142054208.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96b51e9abc195117ec89fe0c3dfa4068/original-2468-5-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd98342514d688c374ed09536afab959/original-2468-6-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55ad1d77aa73acace92dae67d2f1a780/original-2468-1-main1-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/244ecb890cbb08897ae8313a29bedbbc/original-2468-2-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e63a3b969b87897531f368ce5bac520e/original-2468-3-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81eae0f02a11a74ba23ccc7a5bc9eeca/original-2468-4-1024x1024.jpg2024-09-25 15:39:54 UTC615205254 Tools Total Turned wood handles -Walnut and Beechwoods Assortment of steel profile edges marked Holtzapffel & Co., all in a hinged mahogany Paneled cabinetAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused5986-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152052-used-5986-385-antique-holtzapffel-co-ornamental-lathe-54-turning-tools-chisel-set-london30" x 31"15" x 31"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c720b7806de450b52d8a4bd0e96cee28/original-IMG_5972-e1661268890135.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51645c492a89cc44ab04cb69ac79833e/original-IMG_5979-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81dbad1f6720d6d22f837fb5001153c0/original-IMG_5980-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04f9617520c9e3142590c75c5677b302/original-IMG_5972-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f99303d768a000310a999603771df12/original-IMG_5973-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/207bb0dd27599b26c09dac248897988c/original-IMG_5974-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e1afb7c2e4231dac651e27dc0767c05/original-IMG_5975-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b284a7596e39dd2a7f46626d54a13c2f/original-IMG_5976-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ddb188a616ac67acd53a5f81aa349a0/original-IMG_5977-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e635f655c74c95a3187c6a273f7edd9/original-IMG_5978-768x1024.jpg2024-09-25 15:39:55 UTC6152053CIRCA 1890 Includes: Tool handle 11 - Assorted tool bit Hinged mahogany caseAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused2410-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152053-used-2410-385-antique-holtzapfel-circa-1890-tool-handle-with-tool-bits-set-in-original-boxhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed76c358c26459234c444cb6955cf478/original-IMG_3667-e1561060046816.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/018f983650c98c0432b47ef1d1acc59d/original-IMG_3672-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df5da8b6b5ea0e5ed6ec85d462125132/original-IMG_3673-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31b987cd8e346651116ef26a1bbf5e88/original-IMG_3665-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5305b7d4f596ae40661820009c59f132/original-IMG_3666-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed19f9818359b05da3c11d868a5875e3/original-IMG_3667-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89755765073cdfbd180452a1f251f5dd/original-IMG_3668-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14d563b74f105ad8c4e6d251a2b7b8ab/original-IMG_3669-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c6eb95539a8a31458d3c2ce5669c375/original-IMG_3670-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04dbdde5058ebf0a05141689a6b65d1b/original-IMG_3671-1024x768.jpg2024-09-25 15:39:54 UTC6152054Manufactured by D.R.G.M. 8 - Indexible cutting divisions Crank handle 1/4" x 3/4" mount Equipped With: Wood carrying caseAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1175-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152054-used-1175-385-antique-bow-cutter-for-jeweler-s-lathe3" x 2" x 2-1/4"1 lb.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d681551aab962567f5835ee27e5e3a77/original-1175-1-MAIN-e1432728951887.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb895f062400d1ca4f90c473efcd9238/original-1175-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf6082f0dbbb18d2c2c2aef71bfce505/original-1175-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6710f5a90c0053f24e309a65519bd865/original-1175-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/467ed40ea0226be040c78060490e28c7/original-1175-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c66972122b0266d6da811948bb2d82f/original-1175-5.jpg2024-09-25 15:39:57 UTC615205514 patterns Pattern length 8 1/2 " Bottom Machine mounting area 4 1/4"L to R by 3 1/4 " F to Back Overall weight 28 LBS Overall size 5" x 8" x 21" H Equipped With: Easy turn knob for pattern rotationAntique Machinery & ToolsEngine Turning & Brocading Machinesused1863-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152055-used-1863-385-rare-antique-straight-line-engine-turning-cylindrical-indexing-pattern-bar-holder-with-14-patterns3 1/2" L-R 9 1/2" T-B & 5/8 gib.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a8df317e38d822f393694961e65f61f/original-p-005-e1444393947762.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86a0b3ea8730b0d27170bfdbe6b54910/original-p-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee0b540dd5178d4cf98e1489880c5cac/original-p-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2fa4825f445dfb7b900a1bd0391d6a7/original-p-0051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa101807258cce6284e6d85d0eff83e2/original-p-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39d601362fd373f7f229d4cab72a1792/original-p-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57022f23aaa6f675e2caf04b117399c9/original-p-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb0436bf0b8478fbcb87499e93232d71/original-p-011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/491180240e85cb00086a6b73b74a0678/original-p-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f51ccd5e86cd8e144346f1fbd08a2234/original-p-013-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4867e318723bcc7cb6e9167d46caa518/original-IMG-8073-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dc8b9bb7ce4dd9ee154ef6f5415fca1/original-IMG-8074-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edf3e17c7ce923478930a1ec4d96a72e/original-IMG-8076-1024x768.jpg2024-09-25 15:40:16 UTC6152056Consisting of 18 large and 18 regular sized tools - 36 Tools Total Turned wood handles -Walnut and Beechwoods Assortment of steel profile edges marked Holtzapffel & Co., all in a hinged mahogany Paneled cabinetAntique Machinery & ToolsEngine Turning & Brocading Machinesused5984-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152056-used-5984-385-antique-holtzapffel-co-ornamental-lathe-36-turning-tools-chisel-set-london30" x 31"15" x 31"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98326fba1d3fdaeb16c797a258eb8a62/original-IMG_5997-e1661269509891.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e39f2ea6a3c91e41f9e7e8b7d63a76a1/original-IMG_6009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b4fb61382bda74a28bc3529a3320839/original-IMG_6010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f93eed21e203d20d5c5ec930bb4aee39/original-IMG_6011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcc27a9d1d6a3b16730aaca558701319/original-IMG_5997-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c1532829ef6bb79f5f945b9c33289f9/original-IMG_5998-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d53df29cc8f9288d274870d5b64ea12/original-IMG_6001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e4c92ce978f3236858bc4ec5aa9fe9e/original-IMG_6005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78b2ae667d96ea8069d50c92aaf928bd/original-IMG_6006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74dcbb9110821b332e2682101e7a7211/original-IMG_6007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ec08df7b54844d6797dcd6c48fc67b7/original-IMG_6008-1024x768.jpg2024-09-25 15:40:04 UTC615205754 Tools Total Turned rosewood handles, some stamped in block lettering the profile cutter name, steel blades in various profiles, and some marked Holtzapffel, and H & D, housed in a hinged mahogany paneled cabinet, Dimensions OPEN: 30" x 31" Dimensions CLOSED: 15" x 31"Antique Machinery & ToolsEngine Turning & Brocading Machinesused7447-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152057-used-7447-385-antique-holtzapffel-ornamental-lathe-turning-tools-chisel-set-london-54-eachhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2064c6e05cd2f07110f941be2cf07ae9/original-IMG_4620-e1591015800349.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cd5308fb0bba76bd4d7b0c8b4d13e8e/original-IMG_4620-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db4db04d67c4f7ab05da33367af2acd9/original-IMG_4621-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c41f846f480a08b38a8d4cfed3af65cc/original-IMG_4624-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bc2bd691c3a0105e0b5ab0def2e4f4b/original-IMG_4625-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e90f14e37d7e2f403bad3ddb157bbba8/original-IMG_4626-1024x768.jpg2024-09-25 15:40:14 UTC615205875 Tools Total Turned wood handles -Walnut and Beechwoods Assortment of steel profile edges marked Holtzapffel & Co., all in a hinged mahogany Paneled cabinet Equipped With: Original Holtzapffel lock and key Steel wall mountsAntique Machinery & ToolsEngine Turning & Brocading Machinesused5985-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152058-used-5985-385-antique-holtzapffel-co-ornamental-lathe-75-turning-tools-chisel-set-london44" x 31"22" x 31"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/041acf00d75acf86c04e8c3d1768cd23/original-IMG_5981-e1661269289183.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a0dccc888b11a5466637b699e8e4c9c/original-IMG_5988-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b37a3614da41be390563d97035aa62e2/original-IMG_5989-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f091b6ff269728d55226c033c0c02733/original-IMG_5990-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b93e3214746766a966ad5e5220ff7671/original-IMG_5991-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6618c2cf8bbf13579c56d0d77a158ab1/original-IMG_5981-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/678de0cfdc4d62ca7ece112e73fb2e2c/original-IMG_5982-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1820a8f8c18c5116fe9a5b8ebebe1bff/original-IMG_5983-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41a2a0f7594fc3699d794b2a8628a048/original-IMG_5984-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b31fdedc8194ae6fb5f60db34eadd1b/original-IMG_5985-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/709348926afdaecbcfa85dd251f99e1b/original-IMG_5986-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17e583317dcb80dde154ca2e9b652014/original-IMG_5987-768x1024.jpg2024-09-25 15:40:07 UTC6152059Hand operated Machine used to re-cut gear wheels Equipped With: 18 - Assorted gear cutters 12 - Assorted tool holders Mounted on wood base with slide out drawerAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused0451-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152059-used-0451-385-antique-topping-tool-gearwheel-cutting-machine-jeweler-s-lathe6"10" x 6" x 10" high8 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8dd31d920f6f9c331370406d3b3e8dde/original-LATHE-1-e1379007420391.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52948f62bdafc23f1f618e529037fcca/original-LATHE-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/645e8483affb5b6a42eae0ec5f342853/original-LATHE-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/115481059f8828d7d257fa56dcd556a6/original-LATHE-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d57a5b1201c30e08ca3531ea9095e4c0/original-LATHE-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee6f9f7b8c2b106202aea01d5d0a6bc5/original-LATHE-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d984bc68677dd68032642301da6a5c8/original-LATHE-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f9a155dcde496410941122d2725f9e7/original-LATHE-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a52b054b49a49632a9b429a95ce16818/original-LATHE-8.jpg2024-09-25 15:39:58 UTC61520612 " 3/4 front to back chuck opening 2 " 3/4 Left to Right chuck opening 7/8th diameter chuck mount Estimated weight 3 lbs Equipped With: Easy turn wingnut screws to hold work pieceAntique Machinery & ToolsEngine Turning & Brocading Machinesused1861-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152061-used-1861-385-rare-antique-ornamental-engine-turning-work-holding-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60d54b12f62444eb00dc162056f2009e/original-007-e1444393190901.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94c327aadf687869162ceb0790540081/original-0071-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/124a1556770e06c88a0227b8a6347c5c/original-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08dcc702a6266cb1cea06dad878f9cda/original-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fe86ed1d6b514415ddb7df5d3f2398a/original-0111-1024x768.jpg2024-09-25 15:40:11 UTC6152062In 2 Cabinets, One 14 Drawer & One 13 Drawer Complete collection of 1,750 Rolls This fine and rare collection of master engraved Turks Head Rollers date from the 1890s through the 1970s. Typical product uses include: wedding band designs, metal strip designs, eyeglass frame designs, etc.Antique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused9127Pawtucket, RIhttps://www.goldmachinery.com/listings/6152062-used-9127-150-antique-vintage-turks-head-engraved-forming-rolls-collection-of-1-7501.250.312Up To .250"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad0cc50b49208c38c44f4910be1462e4/original-IMG_6657-e1583341107567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/119f19a049a4b1b28003c0aa3a137ae9/original-PatternRolls1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/731c438eb942276432d9e69cae6494b2/original-sample_weddingbands.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/119a20759d15a055457151464dbd8597/original-IMG_6663-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f05e55ddf83fcbd1519240dc8889772e/original-IMG_6662-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ecbec24d2a2a3ed212d4916b6ad3518/original-IMG_6661-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eed8ab73161966f80b22abfdea24f74d/original-IMG_6659-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0c97bebbdf8cbce53aa1553303cdf68/original-IMG_6658-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e7fd246ac05bd8f3450a37e93a1f158/original-IMG_6657-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cd9b8e5219f925794067eef484ba46b/original-IMG_6670-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90df6d661badfdf0e60ec9a8d8b1bba9/original-IMG_6669-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aff6d1fa89c8293724cd9829e44e4a81/original-IMG_6665-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/590ec86a8a22737f25fdaed746e5270c/original-IMG_6664-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98e2163bd531ffacd6cd860ece3c040a/original-turks-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/392c80e77f8f4696d1188b27649e6eb8/original-turks-015-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f31d94ab968e00d424f5de1b20151e4/original-turks-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6f7d4806d37e467f156390c75bc99c1/original-turks-013-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/487b33fb784f9584cfa18a599904a50a/original-turks-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4ef2e3a1776465f62567824820da059/original-turks-011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98380f8a0b57fe6e2e3979e4e74b1699/original-turks-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cbf09897e99a43d92051e628e05c374/original-turks-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc8a0f50a9ba0a881256e51afc8d19ed/original-turks-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d6a7180000686add88508153a130ac6/original-turks-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f57baa9b31923d0c22f8c6e86dd0e401/original-turks-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6df304c22ff5c55731801c3ed831f29/original-turks-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4efaf6403ea96cacf858b4e11bd4ea0/original-turks-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e180aa41e112928da2749a5e4792a35/original-turks-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/405dbcf82db95d8a610bacb94ca1a540/original-turks-001-1024x768.jpg2024-09-25 15:40:11 UTC6152063Movable compound rest Tailstock, adjustable 2" Hand crank for spindle Equipped With: Mahogany base with slide out drawer 17 - tool bits One Crank Handle ReplacedAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1369-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152063-used-1369-385-antique-jewelers-watchmaker-mandrel-machinist-clock-lathe-circa-1860-made-in-switzerland4-1/2"3-1/4"18" x 8" x 11" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ed539cb98716e69359e147b7c716cee/original-1369-1-MAIN-e1421268602687.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac247ffa40110419f951d520ae9ee04a/original-1369-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec2bb0af24d8ced462a06233daaa10c8/original-1369-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/801503fec09b953bb2617045bd789d78/original-1369-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b83720d2e0d8637976b7ca0cf5eb1ec/original-1369-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6ad5516ad04e22d11fe60c5a3512fa0/original-1369-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f03529b1f489243b7fbc1c3c87a5f2d/original-1369-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9dc8a5a8d6bb75715142011b1d8e9d89/original-1369-6.jpg2024-09-25 15:39:58 UTC6152065115V/1PH/60HZ Equipped With: Counter shaft overhead flat belt drive system Dual foot pedal operated belt guides Hand wheel draw bar 35 - assorted #3 AM collets 3-Jaw & 4-Jaw chucks Live center Jacobs 1/2" drill chuck for tailstock Compound tool slide 6" face plate Tool post ring/rocker Steady rest Extra draw bar Wood bench History: -- PROVENANCE, DETAIL / SPECIFICATIONS: CIRCA 1905 WALTHAM, MASSACHUSETTS http://www.lathes.co.uk/ames/ The B. C. Ames Co. was founded in 1901 by Bliss C. Ames as a successor to Alcorn & Ames. He started with small bench lathes and added a line of small milling machines in 1905. The company closed in 1946. Information Sources The Massachusetts corporate registry database lists this company's first registration as 1922-06-26. https://books.google.com/books/about/Ames_Enclosed_Head_Precision_Bench_Lathe.html?id=X9eEGwAACAAJAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused1196-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152065-used-1196-385-antique-b-c-ames-watchmaker-s-clockmaker-s-jewelers-precision-lathe-model-38"20"61/2 HP, 1725 RPM37"61"(l) x 26"(d) x 75" high700 lbs.1820-1920 by Kenneth L. Cope, 2007 page 6https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f4aeef3648a5eb68335d344537ea248/original-next-013-e1434121785439.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2be3b023eeccac123778866455afa89a/original-anyOwQtORqM27ftPrdFWF-QfqA0lUFJFQYzBacyxguqtMypg3Pzw1ge9dOwcm-UgaNNxQV5oCtl7cnA_s0-d-e1-fthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66bcdd775571742c9915009d88133ff6/original-next-020-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49aca1e6781b85524f26f29b57feeb3e/original-next-021-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c5e113a516d5a2fbaa664d8de10131a/original-next-0131-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab4c89c49ff344225f56ecd0ec881db3/original-next-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f33c31e2ae2aeb0cf96a3281d8dc8382/original-next-015-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d299ac05f9b9b33a567442a4e6c4330/original-next-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5055a6923b9c66c7acee194fd0f92c92/original-next-017-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67d07953687de91c694530a98000f960/original-next-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e689742e2af25835f126c567dc2d8f6/original-next-019-1024x768.jpg2024-09-25 15:40:03 UTC6152066Belt Driven Bench Model Less Motor Reconditioned Circa 1890 AntiqueAntique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused0287-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152066-used-0287-builders-iron-foundry-12-double-end-polishing-jackhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c07e5b73f0af5ceea181555e295a4c30/original-0287.jpg2024-09-25 15:39:55 UTC61520672 " 3/4 front to back chuck opening 2 " 3/4 Left to Right chuck opening 7/8th diameter chuck mount Estimated weight 3 lbs Equipped With: Easy turn wingnut screws to hold work pieceAntique Machinery & ToolsEngine Turning & Brocading Machinesused1860-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152067-used-1860-385-rare-antique-ornamental-engine-turning-work-holding-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ac8ce4cfe512f089a11c89cf6eb58dd/original-002-e1444392864574.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0d1704298053296d006ef4182bf93e6/original-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c965d2e4c4945c405ce856aae99325c/original-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb94af140fd123fa378d6a9f78f671dc/original-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/819b44fcdc6529ac75ae918062b42a7d/original-005-768x1024.jpg2024-09-25 15:40:11 UTC6152068110V/1PH/60HZ Equipped With: Wood enclosure with 14 draw tool chest 3-Jaw chuck Face plate Hand wheel drawbar Drill chuck with adapter X-Y crosslide Note: Wood enclosure / tool cabinet to be refinished in the near future.Antique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused5794-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152068-used-5794-385-antique-american-watch-tool-co-watchmaker-s-lathe-with-wood-enclosure7"4.5"14"28"5/8"1/2 hp6 ( overhead flat belt drive)33"(w) x 28"(d) x 72" (H) (includes wood enclosure)350 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a093accc57ae61f3a0401f76df2a464f/original-5794.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb6e89c0dc0ce44c95d124d4fee57a8a/original-5794-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f63a0b8909c75e0ddca43e558660b564/original-5794-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b1d28171b4158eb11a60ea909109aec/original-5794-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b37becbd62c2d76d2067996f83c20d65/original-5794-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68d685aeb9cfe4bd3de3166df64ac695/original-5794-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b2c30b31568c392fe29c5d820493709/original-5794-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcb7ecc9c4b0889b88ca548d1dc05371/original-5794-011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dc7efa55cf4b5e5a8ba2b0c94e99f35/original-5794-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bd8af4558bdbd3a36bc805c808169c6/original-5794-013-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3165508e3962d8dfd2dcce023923e226/original-5794-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a95efb07df2cf56c9d3e54634309b15/original-5794-015-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b5d85f8b659f943e40c513f505096f0/original-5794-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f89e932eb870ef6a3d596b0cdc2091b/original-5794-017-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df508afd1c79ef092b81f4a57cec7f36/original-5794-018-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3db66e4dc734be8dc7ce16e44c6dd1f/original-5794-020-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb75a5fb58d5148e79ecc15fa846f032/original-5794-021-1024x768.jpg2024-09-25 15:40:08 UTC61520692 " 3/4 front to back chuck opening 2 " 3/4 Left to Right chuck opening 7/8th diameter chuck mount Estimated weight 3 lbs Equipped With: Easy turn wingnut screws to hold work pieceAntique Machinery & ToolsEngine Turning & Brocading Machinesused1862-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152069-used-1862-385-rare-antique-ornamental-engine-turning-work-holding-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b3a975f86961f4375bf499b6981ceb4/original-013-e1444393503476.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd44b71400f125e0f24a3c743aba279c/original-0112-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df18da16af1d3edddb29d98d475aaf89/original-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20bcc770dbbfe8256f6ac4f63e2860b9/original-0131-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05480804eb930124e5ee8dc0cf636172/original-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/988f07960ca3a8aac474f58de324d9d5/original-016-1024x768.jpg2024-09-25 15:40:11 UTC615207054 Tools Total Turned wood handles, assortment of steel profile edges marked Holtzapffel & Co., all in a hinged mahogany paneled cabinet Dimensions OPEN: 30" x 31" Dimensions CLOSED: 15" x 31"Antique Machinery & ToolsEngine Turning & Brocading Machinesused7446-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152070-used-7446-385-antique-holtzapffel-ornamental-lathe-turning-tools-chisel-set-london-54-eachhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14acf919cd94641bcd9cba7ccffdf888/original-IMG_4628-e1591015673542.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56c72fb2b9edba06038798bd1c0b0765/original-IMG_4628-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1a05f66c1fd084877756688c7cbdeeb/original-IMG_4629-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cf572b1f2709617a35908e68a1cc62f/original-IMG_4630-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9b60b99de844764a288f14bfdd73604/original-IMG_4631-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ef9ac7003c148cd8fc454fb515f1d93/original-IMG_4632-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8601e1413112a0f655829e1a135d917d/original-IMG_4633-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5063694123bd591d26f6aa46f406f5d6/original-IMG_4634-1024x768.jpg2024-09-25 15:40:16 UTC615207112 antique shaping and designing Tools Turned wood handles -Walnut / Beechwoods Assortment of steel profile edges marked Holtzapffel & Co., all in a wood fitted mahogany Paneled caseAntique Machinery & ToolsEngine Turning & Brocading Machinesused5981-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152071-used-5981-385-antique-holtzapffel-co-ornamental-lathe-wood-shaping-turning-tools-set-of-12-london-rare17-1/2" x 11-1/4" x 2-1/4" depthhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3546293463e0b897f41c6b577181a621/original-IMG_6056-e1661449296815.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82fc719b20576e3efd85606c36e9438b/original-IMG_6062-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a908d8e7467478cfbad50855599c5a6/original-IMG_6063-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/faeb3b1f6edd47ef5780e23639837b35/original-IMG_6064-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aea1a3908799a58b2f4b2864b5af2e9d/original-IMG_6065-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19aa2c43c7ebb166215ede95ee55d666/original-IMG_6066-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cee43e4f232171ff101423d040bc4cb8/original-IMG_6056-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdea71e97850527553d1ec2a56a81fe4/original-IMG_6057-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d798b3486138d2c5d99cde0b2f42f8a/original-IMG_6058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b779c49869d8b5fa369509d50b0bf9c9/original-IMG_6059-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed7d3cddcd2019d39bced4ace37f1f0a/original-IMG_6060-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/063bb33923f06f384931a89ba5a8a4e8/original-IMG_6061-768x1024.jpg2024-09-25 15:40:03 UTC61520721852, marked on the headstock Holtzapffel & Co./64 Charing Cross/1994, the mahogany bench with flywheel, foot treadle, and fourdrawer accessory cabinet, iron bed with traversing mandrel, six-step headstock with main dividing head calibrated to 72, six-step brass driving wheel with dividing head of 96, 112, 144, 192, and 360 divisions, compound cross slide, tailstock, “Sheperd’s Crook”-type overhead crane and pulleys, eccentric and spherical chuck, oval chuck, faceplate, slide rest, and additional mahogany cabinet with chucks and other accessories, wd. 42, dp. 28, ht. including overhead drive 86 in. WITH: Holtzapffel & Co. Turning Tool Bits, mid to late 19th century, twelve steel bits marked Holtzapffel & Co., ranging in size from 8/16 to 16/16, housed in a hinged-lid wood box with two trays, bit lengths 7 to 11 1/4 in. Provenance: Ogden, The Pedigree of Holtzapffel Lathes, pp. 247-48 lists seven owners of this lathe starting with the second owner, Henry Pierrepont, Brooklyn, New York and then through family members by birth and marriage to Theodore R. Crom, Hawthorne, Florida, September, 1974. Equipped With: What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/Antique Machinery & ToolsEngine Turning & Brocading Machinesused7449-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152072-used-7449-385-holtzapffel-company-ornamental-turning-lathe-no-1994-and-accessories-londonhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0e80cca2f70e859625e391ce9cf1c34/original-230_1-e1354624940786.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29d0851248d306e4362a5a221e6442fc/original-7449-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff9bc43b78e0276722767b11b4cb74b2/original-7449-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae34665927d602588cb9dbca8913ec9d/original-7449-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5077f37831061efb8088510d35e78bf9/original-7449-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5505c74de85a39091953f30a2acc7d1d/original-7449-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c8c7e967b4000abeacdda26671fd476/original-7449-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b98637e41e9f18853d841dae741a766/original-7449-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83ec7fb2414472b08cb57704b6f969ad/original-7449-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f21f28355d9cb5052e1c365c0425d242/original-7449-018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff654c07c91a1bfdc85b11b3947820a4/original-7449-019.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0c734a65440be003a8e4a90e93f85e1/original-7449-021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6fd226a019d7212d44ba968816b1e207/original-7449-022.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b1efab19360697dda4d8435da258918/original-7449-023.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa16936ad9907fbe8ca599e51a7c0061/original-7449-025.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c1f00d8c74b619e608569abd623a2c1/original-7449-026.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8e7c3e469b86e4e879cc21718ca637f/original-7449-027.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/944f299d199219ff062f980fe8fe8429/original-7449-029.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5330d8d04411881860436147624da559/original-7449-036.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/362d775ac7982798e82eb8c9468cfb34/original-7449-038.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb1bc2692a037e223542fc54bc005232/original-7449-039.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a47540c60a4023b487b65263e0537178/original-7449-042.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e513dc596caaf1a94d6505ddfcb735e9/original-7449-044.jpg2024-09-25 15:40:29 UTC6152073CIRCA 1920 Max Pattern length approx.4 1/4" Max Pattern width approx. 1/4" Max Pattern bar approx. depth approx 1" Overall bar size approx. 1" x 1/4 x 5 1/4 9 Available pattern bars - Total PKG weight 2.2 LBSAntique Machinery & ToolsEngine Turning & Brocading Machinesused3041-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152073-used-3041-385-set-of-9-engine-turning-straight-line-pattern-barshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d5979ff62ed7f2591c94acff660c9ca/original-IMG_4630-e1566504449484.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d1a66e51238cf709da8b70d15dc968d/original-IMG_4631.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3e13e3ba8a7c049899c9544178cba3d/original-IMG_4630-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/190bcb3363433121aff998dce266e98e/original-IMG_4601.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68ef3a220940058ddf75c7c216fc7e6d/original-IMG_4630-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5f1d6a2d4df03d9970fda41fc7a3088/original-IMG_4631-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e580969f13fcbeddb5c8e287f6f9f3a/original-IMG_4884-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2e36ea45c8b337f0ea3ae06b2c7eb5c/original-IMG_4885-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e51c77aaf2352d2da9d6701f68c23362/original-IMG_4886-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2cd5b4a986bfcbeeafe0a0be091a2daa/original-IMG_4887-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0bafab8cde6e566aa54cabdc93a83f7/original-IMG_4888-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6335679ea5aaf98d5675b1dd8e6c9c24/original-IMG_4889-1024x768.jpg2024-09-25 15:40:05 UTC6152074CIRCA 1915 With machine mount Center height 6" ~ Max 12" Chuck ~ 2" Max diameter for work piece Base mounting plate size 7 1/2 " by 7 1/2 " Overall size 11" x 7" x 13"H Estimated weight 30 lbs Equipped With: Adjustable slide to raise chuck 4 hold down screws for work pieceAntique Machinery & ToolsEngine Turning & Brocading Machinesused1865-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152074-used-1865-385-rare-antique-ornamental-engine-turning-360-degree-precision-chuck-visehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/452253e62509bfc99713a74e6877c42e/original-018-e1444411838577.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5d2763003d567138ae5cdb34e291a2d/original-0181-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a61e443b01e2d0c55865a9aedd30b75c/original-019-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23904eda1d44f4e28428b4a995aa221b/original-020-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17c0af2a8e88297b7c850f8556cff894/original-021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/234b917fb339a7325aed4b5ac7b98f1c/original-022-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d0360fb64a4def075875103733335eb/original-023-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0f7213f4ed33666515103e7935e0dd7/original-024-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02c687e1cca517684f98b69e700003c7/original-025-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f40f79a92f754a5392408abfad41bc11/original-026-768x1024.jpg2024-09-25 15:40:15 UTC6152075CHUCK/VISE Specifications: 360 degree work holder 2-3/4 " Max diameter 3" Max chuck slide adjustment Oval Attachment Specifications: 1" slide adjustment Overall size 7"x 10" x 5-1/2" Approx weight 18 LBSAntique Machinery & ToolsEngine Turning & Brocading Machinesused2841-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152075-used-2841-385-antique-mj-brohen-brocading-ellipse-precision-360-chuck-vise-oval-attachmenthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b10c9e099e9f99e8ca43f39e0ca35f5/original-IMG-5903-e1527171505609.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ea2514120b3ad220e5460d2ad1abb6a/original-IMG-5914-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b553f78d8cf8ce8d1b368fa72ad256fa/original-IMG-5903-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1c98bdcc0a6c0e1c6cd15c44bd395ac/original-IMG-5904-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ab8d27962762418d61e307f78b7a83b/original-IMG-5905-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6808e39c87e16371bc2110ca0482cec2/original-IMG-5907-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d072d41cea3b57bc6e96645e72151395/original-IMG-5908-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea2e7367e65b8a950bb1e6b6f6991db2/original-IMG-5909-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2290cf08b8744876eaa3723f47128080/original-IMG-5910-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bfea491fb0a6e183f620a077d937696/original-IMG-5911-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77ba653a4990ac401be277ed43748c39/original-IMG-5912-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e59c11c7e7966a156dbf65fae894332/original-IMG-5913-1024x768.jpg2024-09-25 15:40:05 UTC6152076Foot treadle operated Equipped With: All mahogany stand 3", 3-jaw chuck 4", 4-jaw chuck Separate tool rest Tailstock live center 1 - large pull out drawer 2 - small pull out drawers Assorted additional accessories What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/Antique Machinery & ToolsEngine Turning & Brocading Machinesused2581-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152076-used-2581-385-antique-goyen-ornamental-turning-lathe-circa-1871-with-accessories7" (over bedways)18"3"2"337" x 29" x 47" high350 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65fa508cf42dd7d54d50622b92ce6588/original-DSCN3867-e1510245572634.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16fbecaf9876abd4dbf5403c2b3b9880/original-DSCN3880.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/065b638b144af2ae26cc849f719d0def/original-DSCN3882.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a89ddc904e0b1b7963539327e6f0be48/original-DSCN3883.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4279b09dac6a86c3fce16fae12424bd/original-DSCN3884.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16ad5a266517f3bb881353713f20c9ae/original-DSCN3885.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e41cae337d1852ca58299c23116ae4b/original-DSCN38671.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22983afa43ced802e21d22c3aa5e2bd4/original-DSCN3871.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/073e3edbe431356d6865e3fd95242dff/original-DSCN3873.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a457a2b0819c1162ca177d857babba5c/original-DSCN3875.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcf73031219c62233800527c195a70d5/original-DSCN3876.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0e66b621eabab0c73d220cde0d1137d/original-DSCN3877.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff69ed5bbc35bd382afcf5455c977f98/original-DSCN3878.jpg2024-09-25 15:40:15 UTC6152077Equipped With: 12 - assorted standard weights 17 - assorted oblong and round weights Beam lever Wood base with slide out drawerAntique Machinery & ToolsAntique Scalesused2524-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152077-used-2524-385-antique-brass-analytical-apothecary-jewelry-coin-balance-beam-scale-circa-1800-s9" high7"11" x 6" x 3-1/4" high3"11" x 6" x 12" high4 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae236ed5d34b734951a52bb14b3554c3/original-2524-1-main-e1515504085363.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fa3673a819903c6129d6d5ca43073fc/original-2524-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f5a18b561ba12dce39455dd9a9639f0/original-2524-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff14f5ba0af79851c057646a9988f2be/original-2524-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43301ecff0e616c25bd98cf456f57499/original-2524-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4afedd2f8cea87f333226f1ae98d6b3a/original-2524-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79f60a749f1e390b9c1d777bed96505b/original-2524-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ddc19957c5c49f4ee1991ff8e30912c/original-2524-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75e53ba96052e3c592a3f7f284b5066f/original-2524-5-1024x606.jpg2024-09-25 15:40:19 UTC6152078D.E. Whiton ~ New London CTMax Jaw opening 4" diameter minim Jaw opening 3" diameter Constructed of machined steel 3-Jaw self-centering design Equipped With: 3" wheel that opens and closes the round jaws simultaneously 1 1/2" tapered mountAntique Machinery & ToolsEngine Turning & Brocading Machinesused1839-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152078-used-1839-700-rare-engine-turning-ornamental-lathe-chuck-watch-makers-jewelers7 lbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3ec3ac53e7307380b902d36e538908f/original-019-e1441738186436.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55fd08a9bc3a11c4469cf01990c0dbd6/original-020-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7294aa9ded04d686452bf6121450445/original-015-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e8312b9b4a4c39df7924952c0b9d029/original-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b73679a40df7105f15a333c00ccfb27d/original-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a123145bf382a1281d324ee88be60dc/original-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/945bbb48eef2278f31473ac00c690180/original-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ce250eca34e49a2c5a7c047986e9913/original-12-768x1024.jpg2024-09-25 15:40:13 UTC6152079Serial No. 1960 Circa 1840 Mahogany Bench With: Flywheel Foot Treadle Cast Iron Bed Six Step Head Stock Six Step Brass Driving Wheel Compound Slide Shepherd's Crook Type Overhead Crane & Pulleys 7" x 21" Turning lathe capacity 3-3/4" Chuck 2-1/2" Chuck 3" Chuck Tapping bits Wood trunk containing: Cross Slides Tools Assorted Face Plates Tool Rests 3 small wood boxes Various Tools Rare HOLTZAPFFEL Goniostat SET IN BOX ALL ACCESSORIES AND ATTCHMENTS PICTURED - TOO MANY TO LIST SEPERATELY!! Various catalogs Instruction books Equipped With: What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/Antique Machinery & ToolsEngine Turning & Brocading Machinesused6771-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152079-used-6771-385-holtzapffel-company-ornamental-turning-lathe-accessorieshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22cc9764e90e55de3f9236aaf58557bd/original-image_51-e1367327760666.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c32cc8f0c78d6416c982feea0b7d8547/original-photo1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db9c5fcf9fe5606c2d8084b342363036/original-547-15.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a783b8633d6644348428fc7807d3ffa9/original-547-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92bf3fcbdad3a9a3021e98f3a0ee0386/original-547-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14a5973a022a4622e447be0db1410999/original-547-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa5d6adf844baa0c21d41cd761c30fdb/original-547-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ab4aa35ffe47ed111e41edf4b7c5acc/original-547-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bd6008c3d4f61fec23721fbff990d71/original-547-9.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6597fe082bbde0a431f043997be5a889/original-547-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31d5ba429a8dd5f518224131b71ac5ed/original-DSCN0573.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dea86de4fceb43a4321b57f1d8e9f118/original-DSCN0574.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3408ca5c434910eeaf7f83bb28ca25f3/original-DSCN0575.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8efb5cc83dc7dfceea0069a9239d959b/original-DSCN0576.jpg2024-09-25 15:40:16 UTC6152080H. Kohlbusch - New York Circa 1890 Bench Model Equipped With: Beam Lock – Lever Type Set of 10 Test Weights with wooden box Provenance: This scale was owned by Tessler & Weiss / Premesco Company (founded 1936), Union, NJ. Link to Seederer-Kohlbusch HistoryAntique Machinery & ToolsAntique Scalesused2899-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152080-used-2899-385-antique-h-kohlbusch-balance-beam-scale-with-set-of-weights-circa-189020”24”10”29” x 12”30” x 13” x 28” Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfc4b6cf0c56521bfd67a1ebda216218/original-1-2-e1533904665214.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f139232662606989a24fe0813ae9328/original-IMG_4192-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8186949726399b5957fd31fe7b77d02e/original-1-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f07ad97e46d990f3906126fe35c484b/original-2899-2-908x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3617657f515748637cb89046a82dbe9/original-2899-4-1024x425.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2436614bdd821b6562ff043bb7c112cd/original-2899-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e892e5c871850e0091f2cc3a5eeb2c85/original-2899-6-1024x815.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e74fa0a5a69eb41da842b43f937b7003/original-2899-7-532x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f748359a0f7dd28953d4bf5d942b7707/original-2899-8-1024x728.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eac145805376081d84c0fb13d5ee5f89/original-IMG_4182-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3054b5ad41a1e7c7415d046071317b49/original-IMG_4184-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/926e889e5cdc68be82a4db2922983c6f/original-IMG_4185-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/111ce19d71cb4751d51a3fd54bb8eaf8/original-IMG_4186-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/935daa423a2bf329b276ffddecf87f21/original-IMG_4187-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41a16c7da90aa430fff853c94757a9bb/original-IMG_4188-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22020e9f8cd0021f8b155263f45339b3/original-IMG_4189-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ab0c708c525a78ae0e358dd30959fa5/original-IMG_4190-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b821f9d32c98c0ff3d93e4a15096f5b/original-IMG_4191-1024x768.jpg2024-09-25 15:40:23 UTC6152081Equipped With: SET OF 9 WEIGHTS DOLLY WITH 4 CASTERSAntique Machinery & ToolsAntique ScalesusedG2140762903-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152081-used-2903-385-antique-fairbanks-4800-troy-ounce-platform-scale-model-sp120418" X 26"4800 TROY OUNCE (400LBS)22"19"36" X 22" X 52" HIGH200LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54fd10128f20e7a29467464cfafa8b24/original-2903-1-MAIN-e1534343850171.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cda3fb35af9c427841244fb41cd345e7/original-2903-7-1024x949.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2dd78110b6ca009f2e6a35b4f9f26706/original-2903-1-MAIN-1-733x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac7e8785ef23a6ed75201a949d62dea4/original-2903-2-726x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e17eaa19ff9f293d1c55c75ae8ac423/original-2903-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebab9634680750b13633d8e1a07418cb/original-2903-4-564x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39ab273c60bc8571987f8ad4c5e4da52/original-2903-5-711x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f400d6aad85a2b3450fd40c237279ea/original-2903-6-430x1024.jpg2024-09-25 15:40:17 UTC6152082Master Design Templates for Gudel 4c Brocading MachineAntique Machinery & ToolsEngine Turning & Brocading Machinesused1559-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152082-used-1559-used-master-design-templateshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/768d9b03e05ead40c9b6c5a0a537f953/original-1559.jpg2024-09-25 15:40:11 UTC6152083ASTM CLASS 1 This weight is used for the calibration of analytical and top loading balances With grip handle Wooden Case, Dovetail Construction Polishing Cloth Included 7.25" Height of weight 4" Diameter of weightAntique Machinery & ToolsAntique Scalesused1345-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152083-used-1345-385-like-new-sartorius-10f-10-kg-chrome-balance-calibration-weight25 mg$ 830.-https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48296c319c4382fa00bc51c5558cb057/original-1345-e1422457635812.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7df4add134989f838be72d84a725ec22/original-IMG_4062-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5100d3c86b1c7c382cc61c1b5a2cf683/original-IMG_4063-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0942af778e10d77f0b274e4dda231c37/original-IMG_4064-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/911671c6ee5c2d429b36826e17e9a0ca/original-IMG_4065-768x1024.jpg2024-09-25 15:40:19 UTC6152084110V/1PH/60HZ Equipped With: Right and left tare buttons Carrying caseAntique Machinery & ToolsAntique Scalesused1092-380Pawtucket, RIhttps://www.goldmachinery.com/listings/6152084-used-1092-380-sartorius-bench-model-analytical-precision-scale-model-bl-610610 grams0.01 G0.01 G500 GF1200 G4-1/2" round7" x 10" x 2-1/2" (h)5 lbs. with casehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3820f41c2ba26fe312a0d6e377242e8e/original-IMG_9979-e1661268268553.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9fb79d38b25e877c558d2eb03470e38/original-IMG_9986.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64a949dda92d6c9b9eabd64e40952665/original-IMG_9988.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c74ea38b57aca9bcc2bdef4c73d2eb29/original-IMG_9979-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4456dd7c62789bc6ec378b82661b2bf/original-IMG_9980.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69ac91a87f8a395b38657206f17353e5/original-IMG_9981.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7449a424efc65e7cb3d8f3aacfcc4749/original-IMG_9982.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/469f08f90744d2c3ed55c098943f411d/original-IMG_9983.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac7ab8d40604574900cab5c45c8ef3a3/original-IMG_9984.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0334a8a4bb73ae13e061e426ed4f96e/original-IMG_9985.jpg2024-09-25 15:40:16 UTC6152085Style 508H M.B. No. B23H62 Equipped With: Brass Post Locking Lever Leveling Pads Bausch & Lomb OpticAntique Machinery & ToolsAntique Scalesused0130-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152085-used-0130-385-christian-becker-inc-wood-glass-case-balance-beam-scale7½"19 1/8" W x 11½" D x 4" H14½" W x 2½" H x 11" D2½"19½" W x 11¾" D x 3/8" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ef496efed11b1e7c38260148fe362ba/original-0130.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/597d188f45f3820a41fe23f709a74761/original-IMG-7018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38197a5984a95ddd0af91542f6c94bda/original-IMG-7019.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abcaaf739e4166fda0358aad092222b5/original-IMG-7020.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21e2e5c3733df6fa0221f23434f9cd0c/original-IMG-7021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93585aafbe94598555cd8890427a10ba/original-IMG-7022.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c5a9d3c2ffed95b0f1bcfe5ea6ea424/original-IMG-7023.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b013a5c4046d9272684833791dd59db/original-IMG-7024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f61dbfd57c5b2ffa03caed84020fec0/original-IMG-7025.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2356bbe70e3d0fd8f71d67f60367e97f/original-IMG-7026.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fd7794d39db39fd8ad4ebfe03138f66/original-IMG-7027.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bc86a3a636dfda1dd7d48f39c2fe6e4/original-IMG-7030.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/474c8bac3a34105c54e1bf0e4344150f/original-IMG-7031.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/929fc0d07173796972b7c837a06e53c6/original-IMG-7034.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/557464f285011354b8d79bea2c3953d2/original-IMG-7035.jpg2024-09-25 15:40:27 UTC6152086Equipped With: Pan 4-counter weightsAntique Machinery & ToolsAntique Scalesused7550-380Pawtucket, RIhttps://www.goldmachinery.com/listings/6152086-used-7550-380-fairbanks-morse-counting-scale-circa-19200 - 50 divisions20" x 33" x 27" high60 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eef88b54080f892c7e50ce0b9541bb7d/original-7550-001-e1393953317547.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/518d7c3d1a1280e7740ddfc8ea1d6bea/original-7550-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5051d9dfe7d35753a7bd8509db74a2a/original-7550-0011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/429301e581db562e9f8a107ddccc18fb/original-7550-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bc230a98c87b400c9072e4947a8e58a/original-7550-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/236725845f3facf7a3fcb8762206feda/original-7550-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8e145bef969b1dc3359933a764f4b1f/original-7550-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87f6fb16f7bb46d48224babae2c6be32/original-7550-006-768x1024.jpg2024-09-25 15:40:24 UTC6152087AntiqueAntique Machinery & ToolsAntique Scalesused5515-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152087-used-5515-antique-howe-platform-weighing-scale13" x 19"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74ba2cddb965c7dfd80339d4f598882c/original-5515.jpg2024-09-25 15:40:20 UTC6152088Equipped With: Wood Base With Slide Out Drawer Set 6 Test Weights Beam Locking LeverAntique Machinery & ToolsAntique Scalesused1610-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152088-used-1610-385-antique-troemner-type-balance-beam-scale10"13-1/2"4"250 Grams13" x 7" x 17" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7fd3b1d102c86253b34abe3d092ca9ad/original-scale-5-1-e1416590066320.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/012440e56a4a8db599bdce21409cf64e/original-scale-5-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a35776fa34ae977df2f6d0896fd283eb/original-scale-5-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/027b48866b78f37a9844f7006ca4c84d/original-scale-5-3.jpg2024-09-25 15:40:20 UTC6152089Refurbished 2004 Year 1941 Below listed are the estimated weights and dimensions of the break-downable parts that make up the sum of the US Mint Antique Scale(s): a. 2 -pedestal legs approximate weight 150 lbs each (300#) 36"wide 19"high 20" deep b. 1 -base ” weight 400 lbs ...8 ft long 36" wide 4" high c. 1 -balance beam ” weight 150 lbs 6 ft long 2" wide d. 2 -hanging baskets ” weight 150 lbs EA (300# ) ...5ft tall 3ft by 24" wide at bottom e. 2 -support polles ” weight 40 Ea (80#)...2 1/2″ o.d. X 6ft long f. 1 -center column ” weight 200lbs ...6ft tall 20"by 12" at bottom 8" by 8" at top g. 1 -top support ” weight 100 lbs... 6ft long 1" wide Equipped With: Cast Iron Pedestal Style Leg Bases Solid Aluminum Balance Beam with Adjustments Solid Brass Pan Holders and Balance Accessories Wood BonnetAntique Machinery & ToolsAntique Scalesused5577-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152089-used-5577-385-antique-us-mint-henry-troemner-type-gold-assay-bullion-balance-beam-scale10,000 Ounces6ft20" Diameter96" High x 8' Long1,700 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e6dd03fcb6f624901129998a151e6c3/original-1-2-e1561641865998.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8132f8b96fa4c94c7e92c26fa8d1f8dd/original-1-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35b0c96aa15084f1980d53932dd2e57a/original-IMG_3778-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21e6af52710e3bc4b25cce1e08f50456/original-IMG_3781-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47285e2cae7a39a5d8130561fef55d1c/original-IMG_3783-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5175f19c6c5f6760ef901f1d0aefea95/original-IMG_3786-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b1b65c7e4b9d0baa53aee8b08e46fc7/original-IMG_3787-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/532b732dd0a1629a796990b2a935fa98/original-IMG_3788-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3696f4d347195fe5ac70bfa46baabb4e/original-IMG_3789-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1538977ce5142bba20c629a700aeb67d/original-IMG_3790-768x1024.jpg2024-09-25 15:40:24 UTC6152090Antique Machinery & ToolsAntique Scalesused0173-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152090-used-0173-balance-beam-scale16" Base28¾"w x 14"d x 6½"h with 1 Drawer 23¼"w x 13"d x 4¾"h27¾"h x 28¾"w x 13"d7½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0d6052bd27a1d6e671460c112ffcb65/original-0173.jpg2024-09-25 15:40:21 UTC6152091Treadle powered with hand crank option 3 - Operating speeds Equipped With: New leather belt kit Foot powered treadle Hand crank wheel 14 - assorted regular collets 5 - assorted special collets Thumb wheel collet draw tube Tip over tool rest Mounting vise Additional Photos:Antique Machinery & ToolsAntique Jeweler’s & Watchmaker’s Toolsused8026-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152091-used-8026-385-antique-boley-german-treadle-powered-instrument-lathe-s-n-211020"8"9-1/2"2-1/2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5101bdaaf0f1586276499ef5d131ada6/original-8026.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5af0f34f7032b5f78016838dba0b3e99/original-8026-1.jpg2024-09-25 15:39:58 UTC6152092Register no. 40816 Equipped With: Wood and glass case Panel board control Set 9 - precision weights Operating manual Slide out wood drawerAntique Machinery & ToolsAntique Scalesused2560-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152092-used-2560-385-antique-seederer-kohlbusch-2000-gram-heavy-capacity-balance-scale-model-140-type-5482000 grams13"26"8"35" x 15" x 38-1/2" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7409e500db70915d36801342fbf31781/original-2560-1-MAIN-e1509558175882.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0feca15181e7d209ea4d09cb6010324c/original-2560-9-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bccaaf819da353dbc6f2c15bbe7955c/original-2560-1-MAIN1-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c37f4c49b1c615f4c9b0a61463a2807/original-2560-2-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a92d183ee6a234f3d8680d3342f9909e/original-2560-3-671x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a2291a7313b61d0b18a449cd24a5b7a/original-2560-4-1024x635.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e996ef564de60d0f1a1e513ad29086a2/original-2560-6-1024x918.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2dcce0338ef5feea779e29905bb3972/original-2560-7-975x1024.jpg2024-09-25 15:40:19 UTC6152093No electricity needed! Model # 4655 EE Seral # 850 Parts Counting Ratio Scale 12 to 1 & 72 to 1 ratio 40 Lb Capacity All glass is good with no breaks Overall size 40" x 19" x 46 Scale weighs approx. 60 pounds. Less one hanging scoopAntique Machinery & ToolsAntique Scalesused5907-380Pawtucket, RIhttps://www.goldmachinery.com/listings/6152093-used-5907-380-vintage-antique-toledo-scale-co-over-under-parts-counting-ratio-model-4652-40-lb-capacityhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9be149226d745a61d46b9a0e00eef65d/original-IMG_8713-e1695829544605.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/611638a493ef0c8541fa8fa49fcd3a27/original-IMG_8719-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39154e90dbc439884bf804d7e1aa7b88/original-IMG_8720-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f29931e22abe2a63f45130f28aadf3c/original-IMG_8713-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96cb47254a0fdcea2b27ab549decaffb/original-IMG_8714-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/491628bcb5b1f5255ba4320b1797d0a1/original-IMG_8715-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d48a69b2d0c2360b85576955684ff81f/original-IMG_8716-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/702bed0dc8eb17d7b6aad74cfa0416da/original-IMG_8717-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d84621ce836361bb89041965476edeb/original-IMG_8718-1024x768.jpg2024-09-25 15:40:16 UTC6152094Scroll Down To See Video! Voltage 220 / 3ph - 50/60 cycle Motor - 1400 Revolutions per minute Equipped With: Indexing hand wheel for moving 6 cutters left and right Hand operated gear driven rotational Drive system for turning Cylindrical parts Two Pattern bars mounted in the machineAntique Machinery & ToolsEngine Turning & Brocading Machinesused2981-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152094-used-2981-385-a-augenstein-germany-6-position-cylindrical-pen-tube-duplicating-engraving664-1/2"7/8"30" x 26" x 52"+/- 1000 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b37fd4bddebaf4d0760ee3c04dc3a50d/original-IMG_2573-2-e1558112844336.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43c947e12c511cef7c1f851cf0ad1c82/original-IMG_2621.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64fe630fd8c679e4e4c19000fc5a86f2/original-IMG_2623.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28c5aea9581dcedc10149aea5aee10df/original-IMG_2625.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0780b390d2f51fbe28171bc79082bb20/original-IMG_2573-2-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aed723f3d0d2ad48a3be092596aad842/original-IMG_2574-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c23e201642fcb1afa8b31faa51d9340a/original-IMG_2575.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e467fb9aadfb2e6f171f072a9274d8a8/original-IMG_2576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/327dcd781996c3ee6a8d71c3331bc214/original-IMG_2577.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79125ead424c030f13861ae1a99d418e/original-IMG_2578.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/854419e4c56c2606564877f0942a265a/original-IMG_2579.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cbb3e986acda07b8c7db16fdb1812b9/original-IMG_2580.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6dfbde065636a0da6b2941b4575b66f/original-IMG_2581.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d744362b9dc6108a34cd24b9b9602e0e/original-IMG_2614.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a71c9ca80929fdcacfb4dc3797fcfeef/original-IMG_2615.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45018152beb811ae2307e3ec19a40269/original-IMG_2616.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dad6333c7f4c2db31f137f32f716359b/original-IMG_2617.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9c8e17a390df6f4600d85c22173bc4d/original-IMG_2618.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8a10b7afdfea01345b27d6de6bead93/original-IMG_2619.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07104fd99d66f061f3eda8e10dd47745/original-IMG_2620.jpg2024-09-25 15:40:10 UTC6152095Hand Or Belt Operated Circa 1900 Equipped With: Parts/Accessories/Gears available as pictured below, please note that the accessories will be divided between this machine and similar machine we have listed: https://goldmachinery.com///machinery/0619.htm Examples of Straightline TurningToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused0614-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152095-used-0614-385-charles-field-antique-automatic-engraving-chasing-machine-circa-19006 Pieces At the Same Time25 Revolutions/minOriginally utilized for Tiffany & Co.27 x 21" x 17"h225 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5f9a0e5d357c09fab8af4ea4b83371c/original-0614.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8175c3450f3d5ae7293e4121a299ae0/original-IMG_24381-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c0d7c5e77e85e0c991c411b1a37eda4/original-IMG_24401-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb59d8f0a497d7f517e518710f0f85cb/original-IMG_2441-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/568a2b1370e442dbf1459bf6fde5ff2c/original-IMG_2442-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ccbcd6067fea069c64809c4d4a01af9/original-IMG_2443-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45bacccb27232ea9a9cdaea117ba7783/original-118-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74cfa94c574018654621cbf91e36ec67/original-24-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9670648ad291d089f2a1a2e9ab4c53a1/original-32-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c5e864f296dcdba8c05be09c3fac250/original-41-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fd2ae44a46a292f1594093997a703bb/original-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdbf405c94ac6679e62325dd31c06e73/original-IMG_24371-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/945d2c0b936ce535aad0b5735aecb1e7/original-ET1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56cadaa833a57b63db99a5e9343ae47a/original-ET2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fd4c0810c5a3b5c416e0802b0bfdb4e/original-ET3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f95c20e0bcffebc2cb0d21abf8093005/original-ET4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c385d19db7ba178a8e6b8584a045b2b8/original-ET5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/806022389f3473fce4afd6070c1737c2/original-ET6.jpg2024-09-25 15:39:44 UTC6152096ASTM CLASS 1 This weight is used for the calibration of analytical and top loading balances With grip handle Wooden Case, Dovetail Construction Polishing Cloth Included 7.25" Height of weight 4" Diameter of weightAntique Machinery & ToolsAntique Scalesused1338-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152096-used-1338-385-like-new-sartorius-10f-10-kg-chrome-balance-calibration-weight25 mg$ 830.-https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cd542616d9da03a2bec1f0a7a44a2b0/original-1338-e1422457279781.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad4aa0eec120f2b532a138e54ad746d3/original-IMG_4058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b89794049b0b1220e1e556b60d3d7fe/original-IMG_4059-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff659ec4720d507e0f93cbecd3b70503/original-IMG_4060-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52a870979d9c357202e239bea960f6f0/original-IMG_4061-768x1024.jpg2024-09-25 15:40:19 UTC6152097Equipped With: Wood base with Slide Out Drawer AccessoriesAntique Machinery & ToolsAntique Scalesused1598-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152097-used-1598-385-antique-troemner-type-balance-beam-scale6"8-1/4"2-3/4"10" x 4-1/2" x 10" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/936947a863435002202b91aa02b32666/original-scale-3-1-e1416589205448.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c852f6947b7d76271dc6604bf071d451/original-scale-3-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27be3bcb06d4e61c602c8063e0b8f10c/original-scale-3-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4ef7d97a5062add97884a2e2387f3c2/original-scale-3-2.jpg2024-09-25 15:40:20 UTC6152098August SauterCap 2500 Carats Base Size: 21½h x 11½"d with Drawer Overall Size: 21"h x 21½"w x 11½"d Equipped With: Beam Locking Lever Levelling Pads Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0205-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152098-used-0205-sauter-balance-beam-scale3" Cupshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc8ee0441068faf7cde0c815b7ce1a55/original-0205.jpg2024-09-25 15:40:21 UTC6152099Equipped With: Wood base with Slide Out Drawer Assorted Accessories Beam Locking LeverAntique Machinery & ToolsAntique Scalesused1597-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152099-used-1597-385-antique-troemner-type-balance-beam-scale6"8-1/2"3-3/4"10" x 5-1/2" x 10-1/2" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13dfe375c4783db99358689c54d71284/original-scale-2-1-e1416588285252.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53ee64d218a3891816c2593d9ffdbc23/original-IMG_8227-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/939d34d52fe58d60000a3fe5f7f4a951/original-IMG_8228-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3d8d42e356c071d71fae2f760cdae2d/original-IMG_8229-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f48e7d4d65540ae19481c56f00b57c4/original-IMG_8226-1024x768.jpg2024-09-25 15:40:21 UTC6152100Equipped With: Metal Base With Slide Out Drawer Set 7 Test Weights Beam Locking LeverAntique Machinery & ToolsAntique Scalesused1599-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152100-used-1599-385-antique-troemner-type-balance-beam-scale8-1/2"9"3"11-1/2" x 5-1/2" x 12" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9f8bd538a6dc946d92d643558baa2e7/original-scale-4-1-e1416589516978.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76e4ee94bd68ba0bd7a0eb3b0f4af564/original-scale-4-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a164270852b5af04ea631f88a3b0fa63/original-scale-4-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3624e75a784dcd293587f21a55397e73/original-scale-4-2.jpg2024-09-25 15:40:20 UTC6152101Mahogany & Glass Case Size: 21w, 19¾"h, 10"d with One Drawer Size: 16¼"w, 2¼"h, 9"d Equipped With: 9" Brass Balance Beam 3½" Pan Holders Brass & Aluminum 3½" Pans Beam Locking Lever Leveling Pads 1 Small Set Brass Weights 1 Small Set Aluminum WeightsAntique Machinery & ToolsAntique Scalesused2145-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152101-used-2145-seederer-kohlbusch-balance-beam-scalehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc441247709fe1b3a6aa10a71699ffbb/original-2145.jpg2024-09-25 15:40:22 UTC6152102Equipped With: Wood & Glass Case with 1 Drawer Beam Locking Lever Levelling PadsAntique Machinery & ToolsAntique Scalesused0131-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152102-used-0131-seederer-kohlbusch-englewood-nj42" W x 18" D x 40" H25"36" W x 4½"H x 17" D10"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90f93956ccebab802a2892e2c82b538b/original-0131.jpg2024-09-25 15:40:22 UTC6152103Christian Becker NY,Width: 8 Base Size: 16½"w x 9"d with 1 Drawer 12"w x 8¼"d x 2½"h Equipped With: Beam Locking Lever Levelling Pads Small Set Of Weights Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0204-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152103-used-0204-balance-beam-scale19"4 x 16½"w x 9"d2½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f4f08f75db0300935aa00e387d43c60/original-0204.jpg2024-09-25 15:40:22 UTC6152104Seiko Seederer-Kohlbusch Inc Englewood NJBrass Beam Width: 16 Base Size: 23"w x 11"d x 3½"h with 1 Drawer 18 3/8"w x 10½"d x 2"h Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0171-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152104-used-0171-kohlbusch-balance-beam-scale21"h x 23"w x 11"d6https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55225f2ca03e1be5c372468669ee65a3/original-0171.jpg2024-09-25 15:40:22 UTC6152105LUTHER GRINDGER MFG. CO. MILWAWKEETOOL REST SIZE 2 3/4" X 1" C-CLAMP MOUNTING Equipped With: CAST IRON CRANK HANDLE WITH WOOD KNOBAntique Machinery & ToolsMiscellaneous Antiquesused2793-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152105-used-2793-385-antique-hand-crank-operated-grinding-machine-circa-1900-best-maide-14" DIAMETER X 1 1/2" THICK5"1 3/4"11" X 5" X 15" H4LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0491e57d5e36a154e63d96aa31fbbafe/original-2793-1-MAIN.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b498c6d0e6d2ecdd4dd6922439ca7d6/original-2793-1-MAIN-1-1024x709.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd973a8109489d0cd29a45b11719b9f6/original-2793-2-1024x876.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40b4e662a18237a50a90d043a422131d/original-2793-3-1024x637.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9217cb0d3cd43ce00ef8864002a32e13/original-2793-4-1024x564.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a126381cf9fd8e7203e3b7500ab4c2b/original-2793-6-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06b9925ce22a00fcb125c3a04ecab81b/original-2793-7-812x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e60a95c0414ad1ea0c1614ca99de0fc/original-2793-8-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d62ee221bc45b710adee0529cc63d6d/original-2793-9-1024x940.jpg2024-09-25 15:40:29 UTC6152106Antique Machinery & ToolsOrnamental Turning Lathesused2216-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152106-used-2216-385-antique-holtzapffel-3-1-2-x-8-l-shaped-square-for-use-with-ornamental-turning-lathehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e38ebd31d6455e294226ffe7f089297/original-2216-1-main-e1483977646564.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edb5655c76c655bceb398c0ca7a3d990/original-2216-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96a621f9e6eb29ceeb77a1c3fcea8208/original-2216-2-768x1024.jpg2024-09-25 15:40:23 UTC6152107Circa 1920 Manufactured in Jersey City, NJ Equipped With: Full glass enclosure Slide out, bottom drawer Set of weights Beam locking leverAntique Machinery & ToolsAntique Scalesused0644-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152107-used-0644-385-antique-daube-hopken-balance-beam-scale18"25"10-1/2"36"(w) x 17"(d) x 35" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47da8cd9de22c0b92fe4cffbee3b6c98/original-0644-1-MAIN-e1400694416500.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c292fae4d7d29ad5aea0e01a76f52d3d/original-0644-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/242bc29146683ebac702f53a46b0a35e/original-0644-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e627259b7c6a9d68f4b31a2a7266b7f/original-0644-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/796e437051082a72e3dbfb9122d87c67/original-0644-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64f5e9f0dde02426fc35ffff6fe81050/original-0644-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d6841386748ec6e8999f4dd65c3b10d/original-0644-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbbb872859f918992e7c55589645354b/original-0644-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3296c05887ae58a26dca26ea893066ca/original-photo-1-1024x764.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b85208117d5271d3d6b36936f9c41529/original-photo-2-1024x764.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90020617f7adb2e56c8201a52db35435/original-photo-3-1024x764.jpg2024-09-25 15:40:25 UTC6152108Circa 1860 63 " high ( above oak table) 91" high overall with table Equipped With: 2500 TROY OUNCES COUNTERWEIGHTS HEAVY DUTY OAK TABLE HISTORICAL HISTORY:Antique Machinery & ToolsAntique Scalesused1337-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152108-used-1337-385-antique-l-oertling-hd-assay-bullion-balance-beam-scale-circa-186010,000 TROY OUNCE28"1700 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a4f76042c16b5992837b206bf1e946d/original-1337-1-main-e1420204158914.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b3c232ffa63f5d8cedf5c2767a0cdc5/original-ludwig-oertling.PNGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8312aa1aafd01ccc1a8ea0b9b0001c83/original-1337-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e0110cf3c9c7fd7f0cde91cc6966d57/original-1337-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cae1a9408e3189002ed147c7bd0e7a9/original-1337-9.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5312c94afd5ba888ef4d57516bce3561/original-1337-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53c91c6b2169ddf113739c92f32b0a60/original-1337-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b55c1707704849390b36fcf4ca22a142/original-1337-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c698f80350d5f36887432e79b742d494/original-1337-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c30de88f4a3d50158eef4b62a87909c3/original-1337-5.jpg2024-09-25 15:40:21 UTC6152109Antique Machinery & ToolsOrnamental Turning Lathesused2218-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152109-used-2218-385-antique-holtzapffel-horizontal-slide-milling-attachment-for-ornamental-turning-lathehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08f57e8c14d9be0bf402b9bd701f433f/original-2218-1-main-e1483978044958.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd6894e553c66d23b32fd956d00c81fd/original-2218-1-main1-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c19e76c745c1bd7d2feb15347ebadfb3/original-2218-2-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fd3ace519d2d78d6a8759607c1abc4a/original-2218-3-1024x1024.jpg2024-09-25 15:40:24 UTC6152110Beam Width; 5-1/2" Equipped With: Wood base with Slide Out Draw with Felt Lining 8 Test Weights Beam Locking LeverAntique Machinery & ToolsAntique Scalesused1596-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152110-used-1596-385-antique-troemner-type-balance-beam-scale7-1/2"2-3/4"10-1/2" x 5" x 9" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cce48593d6518ee54e3ea110344a4a5/original-scale-1-1-e1416588042706.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/803da0b19797399d7bfe954aaa62780a/original-scale-1-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4cdfdd4e9c9b0927adce02879994382b/original-scale-1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/763ac181a808158d2485bcbbc4135437/original-scalle-1-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2575caf73c0d074b8f8898ac1f0b25e0/original-1596-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9738480b4b6ef474b2430995a625811/original-1596-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2fb5d4aee04ac1e078d40028de0eb9d/original-1596-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43caffeb8a4b7bf2cec8a89ba3c75a8a/original-1596-4.jpg2024-09-25 15:40:24 UTC6152111Good Condition Antique L Oertling 2500 Troy Ounce Brass Counterweight with Carrying Case Mahogany Wood Case, Dovetail Construction Original Case, Made in England Carrying Handle 11.25" (13.5" with handle) Height, 8" Diameter OERTLING fine British balances from 1847 to 1996Antique Machinery & ToolsAntique Scalesused1350-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152111-used-1350-385-antique-l-oertling-2500-troy-ounce-brass-counterweight-with-carrying-case-and-bridge-type-carrying-handlehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/690b5da8633e57b8bde421d8d628f562/original-1350-e1422458031509.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9e1b9d0cc6704dcc4d746931679b66e/original-IMG_4069-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb1eba17113070824a3389b211ace5c8/original-IMG_4066-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d84f6cf93667d3158f5efb33fa863174/original-IMG_4067-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0413f94c2aad8e0d84bf86c75856adb2/original-IMG_4068-768x1024.jpg2024-09-25 15:40:18 UTC6152112Circa 1930 30 drawers: 17-3./4"(w) x 24-1/4"(l) x 2" deep(I.D.) with a a partition in the middle of each drawer Antique drawer pulls on each drawer Labels for content identification on each drawer 2 Unit Construction Oak WoodAntique Machinery & ToolsMiscellaneous Antiquesused2731-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152112-used-2731-385-antique-liberty-bureau-makers-oak-multi-drawer-flat-file-cabinet-circa-193044"(w) x 27"(d) x 52" high17-3/4"(w) x 24-1/4"(l) x 6" deep ( I.D.)300 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b375851adf616e73506734e2c32a93e5/original-2731-1-MAIN-e1525882010916.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4c275a5114050570df8b26894c2e8cf/original-2731-6-1024x613.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9cdc9440d8a8aaabcde7431d40e0e65/original-2731-7-1024x568.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eeab34360428bf770a96850119238f15/original-2731-1-MAIN-1-927x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96fd151b8fccb35e0ff933c0958cefe2/original-2731-2-833x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8be530554ffcaa905491d542ad7fdac/original-2731-3-709x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/061bdd39a2e11f978210e58b4b6fde71/original-2731-4-905x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45c61969d8aeef20665f68d10aa10f19/original-2731-5-1024x885.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7720bfe225d2e796fa7132644472658/original-2731-B-896x1024.jpg2024-09-25 15:40:32 UTC6152113Aperture/Bridge type Circa 1880 Equipped With: Round wood baseAntique Machinery & ToolsMiscellaneous Antiquesused2644-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152113-used-2644-385-antique-rare-hand-operated-screw-fly-press-with-round-wood-base-circa-18809"7-3/4"1-3/4"3-1/2"35"35" x 19" x 60" high400 lbs.From the F. Goldman Ring Manufacturing Companyhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84b3f9dd6ef7cc0c21b64750025db759/original-021-e1515171044927.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d880046db52d6ff809ce5776de68eb02/original-2644-1-465x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bce58705dac05749f7b3aac25877a3df/original-2644-2-566x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca05ee20edb146ad059630b4e19a1325/original-2644-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ad974169ba7bab096abcc73e8b9f231/original-2644-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dc6d2164f657e957cd522ec0011ba65/original-2644-5-723x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/927b68f4ae9b08080b9a397cc983c7ea/original-2644-6-988x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d83bb1888200bd90f1f67f9573cf4e2/original-2644-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/469b3f5a4a8569861a6dec39c642e582/original-0261.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36f1e3c92844f130f2bde50d405153ff/original-0301.jpg2024-09-25 15:40:34 UTC6152114Steampunk, Circa 1870 Heavy Duty Ram may be activated by kick motion or hand lever Heavy duty cast iron stand with ornate carvings on legs.PROVENANCE:This unique example of an industrial foot press from the 19th century was purchased from Larter Company founded in 1865. This foot press appears to be one of the first machines they purchased. We also believe this press would have been manufactured in France.Antique Machinery & ToolsMiscellaneous Antiquesused1269-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152114-used-1269-385-antique-rare-foot-hand-press-steampunk-ornate-circa-1870-france5 Tons4"1-1/4"4-3/4"7/16"(11mm)3-1/2"17"34" x 33" x 72" high500 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25bc26ffe73efd3205728a4020f856ed/original-0031-e1460667348202.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c002bea0ca6dc14d9fa476b0173f26b/original-0071-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09e0788571fe0ca4100eca76376b6a87/original-012-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcbf45195497efad4dea23d70d72f4ae/original-0101-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d89fb32e8e05ecd07932ecbaf4ecd30/original-0091-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09e85e8ff7a9b749a7df66cf03f1452a/original-0013-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84494525809035bc4b41dff0ef268091/original-0031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/652d8c7b5b82f1fe336abde7c82d5214/original-0041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7902358d9b11962f45222f6df029da42/original-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb7e2c76fff4ffd729309578b9bb031e/original-0062-768x1024.jpg2024-09-25 15:40:34 UTC6152115Bench Model RUF (Germany) Single Curb Chain Machine with Plexiglas Display Including Bench Top Mount DC Geared Motor w/ variable Speed Controller 115v/1hp Tooled for .016 Wire Magnifier Lamp Illuminated Wire Spool HolderAntique Machinery & ToolsMiscellaneous Antiquesused8778-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152115-used-8778-100-antique-chain-making-machine-show-exhibit-displayhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d70a5a5d1ee6ceb599290144c7c4e856/original-8778-1-MAIN-e1496674319186.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d24c4f4fe68e1092e389164d14bf789/original-8778-6-1024x1014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0cf2df20752a077505e409710aa310d8/original-8778-1-MAIN1-1024x933.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7315fcae1529a2cf12c289dd4838c7ab/original-8778-2-909x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9cdb0018491dc67d522e7378ead1871/original-8778-3-906x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0101f6d8f27babd0d4f48ed0f7eb914/original-8778-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/889a36dbc1d2017342bd8e2b8e7ccc69/original-8778-5-1024x996.jpg2024-09-25 15:40:32 UTC6152116Wood construction 3 - inside compartments (1-sliding) Hinged lift up cover Items inside: Set (12) wood auger drill bits 1 - Antique hand plane Assorted clamps Assorted other items as photographedAntique Machinery & ToolsMiscellaneous Antiquesused1074-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152116-used-1074-385-antique-woodworker-s-tool-chest-carpenter-s-box35"(l) x 20" (w) x 17"(h)200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/891a2958fa1e908c104a61ef5eff828f/original-1074-1-MAIN-e1432141611171.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d3eb3433e7abdeed32d9c2e39daa52a/original-1074-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42dd4d988109b8ce478f761637063448/original-1074-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5aca86815116067f3bc9480b1c900e52/original-1074-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/170086626e758a3114a71b392e4f057e/original-1074-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a26948b8ffe6391f55fbec49d522927/original-1074-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b47493be1e0db65ccb532dfcdee179f/original-1074-5.jpg2024-09-25 15:40:33 UTC6152117RUF (Germany) Single Cable Chain Machine with Plexiglas Display Wire size is .010" Link size is approximately .060" Including Bench Top Mount DC Geared Motor w/ variable Speed Controller 115v/1hp Tooled for .015 Wire Magnifier Lamp Illuminated Wire Spool Holder On Stand Machine was built and owned by The Armbrust Chain Co, Providence RIAntique Machinery & ToolsMiscellaneous Antiquesused8753-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152117-used-8753-100-antique-chain-making-machine-show-exhibit-displayhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/555c2b8fa1891ce7458bc4d955391ce4/original-IMG_7323.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/164c9647a7bb743cafb67ce4ef035155/original-8753-1-1024x867.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfbe5b9ad88a67f19e3f4ef2b97056f7/original-8753-2-691x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e4c29404050df49112b304b24037561/original-8753-3-918x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6e6bfa19f15a9545f786c86dc8b663f/original-8753-4-811x1024.jpg2024-09-25 15:40:33 UTC6152118VINTAGE L.S. STARRETT 25" VERNIER CALIPER No. 122-INSIDE-OUTSIDE MADE IN USA WOOD CASE 25" VERNIER MEASURES INSIDE & OUTSIDE Wood Box Size 29" x 5" x 11/2"hAntique Machinery & ToolsMiscellaneous Antiquesused3371-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152118-used-3371-385-vintage-l-s-starrett-25-vernier-caliper-no-122-inside-outside-made-in-usa-wood-casehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/346961b1ce846e2e870ee864e14dd989/original-IMG_9422-e1591363581452.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab9250d0f78612ddce8bfa0d5fea5c90/original-IMG_9423-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f34a7d97eeb4719d22bcac507c48ff9/original-IMG_9424-591x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fbce7d6e14005764e4d3c0a4899199e/original-IMG_9425-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd47721826a9bf830eda9369411e331e/original-IMG_9427-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc6cde59e0bd2df03cca704b33c5b3c8/original-IMG_9428-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e424c77766cb64e5911eb88e507c78c1/original-IMG_9429-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e800ffa3b5461b922107d086c014d6a/original-IMG_9430-453x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4892366137cac57798122a4eb15781b4/original-IMG_9431-348x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a99a00934cbf3e4bfa15d81d8f3f7930/original-IMG_9421-1024x453.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99eec0d01745e3b49850a246a6125bfc/original-IMG_9422-1-1024x768.jpg2024-09-25 15:40:28 UTC6152119Glass on (3) sides, 2 doors on 4th side Equipped With: COMPLETE WITH STARRETT TOOL COLLECTION 4-wood shelves keys/casters Original tools and catalog Note: This cabinet is in pristine condition.Antique Machinery & ToolsMiscellaneous Antiquesused5526-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152119-used-5526-385-antique-original-oak-starrett-tools-display-cabinet-with-tool-collection22"(W) x 21"(D) x 38"(H)32.5"(W) x 28"(D) x 45"(H)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a5589028d5453238f4ed8476fe0c486/original-5526-1-e1346891754346.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/126299d463200bac7ac5bb2f67ecac0c/original-5526-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f64735554372f40c494bfdeb25d8cf17/original-5526-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53603d71c42f7514e68d3279baa01c9a/original-5526-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3584632ab95b83921ce7f73a1740828e/original-5526-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f2563e34aa4ecc0444fb8d2c554369c/original-5526-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f367da0e6f367ea87abebbf2b976b1ff/original-5526-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/784b750666fd44bddc27b4dd1a18b791/original-5526-7.jpg2024-09-25 15:40:36 UTC6152120Between Centers. 3 Jaw Chuck Reconditioned Circa 1890 AntiqueAntique Machinery & ToolsMiscellaneous Antiquesused0284-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152120-used-0284-putnam-lathe13 x 28"13" x 28"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1c1f68a38b8963d0f004e994c05227c/original-0284.jpg2024-09-25 15:40:32 UTC6152121SOLID BRASS MONOBLOCK DIMENSIONS: 5-1/2" H, 5 -7 /8" Diameter 40 Lbs Weight 640 Ounces 12,800 DWT 19,906.2272 Grams 18.1437 Kilograms 9 EACH AVAILABLEAntique Machinery & ToolsAntique Scalesused0514-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152121-used-0514-385-brass-henry-troemner-u-s-mint-scale-weight-scale-weightshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ed2dd6c89fef7f4bf9324fa1ba1b5c3/original-001-1-e1400072472681.jpg2024-09-25 15:40:19 UTC6152122Circa 1860 Good Condition Antique L Oertling 2500 Troy Ounce Brass Counterweight with Carrying Case Mahogany Wood Case, Dovetail Construction Original Case, Made in England Carrying Handle 11.25" (13.5" with handle) Height, 8" Diameter OERTLING fine British balances from 1847 to 1996Antique Machinery & ToolsAntique Scalesused1348-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152122-used-1348-385-antique-l-oertling-2500-troy-ounce-brass-counterweight-with-carrying-case-and-bridge-type-carrying-handlehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1b8fd4ba24110ecd0f150b253cdc419/original-1348-e1422457807436.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/481304ab44635b9ac964b0da430b0e30/original-IMG_4070-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a2eafe507ea354d27109fc5ef08d3b9/original-IMG_4071-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2823fa127be235df5f15db807c2f55f/original-IMG_4072-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfa8a86750919d08c7a0ca6d1452e78a/original-IMG_4073-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cce18517866205437fab1bec571f57f/original-IMG_4074-768x1024.jpg2024-09-25 15:40:19 UTC6152123Antique Machinery & ToolsAntique Scalesused0276-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152123-used-0276-seederer-kohlbusch-seko-balance-scale16-1/2" W x 9"D x 17-1/2" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8791cf294be013a21d3938fbb9bbb858/original-0276.jpg2024-09-25 15:40:20 UTC6152124Floor Model Circa 1870 Equipped With: Lever pin adjustable strokeAntique Machinery & ToolsMiscellaneous Antiquesused0282-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152124-used-0282-385-r-blundell-foot-press-circa-187010" x 6"63"17" x 22"2 tonshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bbfd19203e0cc17ea114928fbd44916/original-0282.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/62f6dc87f1a4705babe8e36a8042135a/original-IMG_0969.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e9a869cc49787d6097a55a2d145f559/original-IMG_0948.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0bec376f60eb10bd06d4dd7e29fd8bc/original-IMG_0949.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86debf43042337c511e8ff4474b9662f/original-IMG_0950.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f83d7bdd77bdb9756732a3858469ea7c/original-IMG_0952.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66038ad837227c6064e672852582e91d/original-IMG_0953.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe0e6fc851c5307378300e103ffc10f2/original-IMG_0956-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45993f57161007ecf8147a0458fa363d/original-IMG_0958-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48347bafb83458a42807dc6c69183edf/original-IMG_0961.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a48520edad3ca6e1d5487884a0dade9/original-IMG_0962.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73cdf43ad79c3b6e4ac9e6641626f8d5/original-IMG_0963.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5064b235eac0d4596a50569a8cab42cc/original-IMG_0965.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de7b52ee83f1a496df8226ac9176dcb6/original-IMG_0966.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b36e2942c3b5d31a1b015b01e78d6c6/original-IMG_0967.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d59cb3bfcb35da2c24ed1b7e671f33fa/original-IMG_0968.jpg2024-09-25 15:40:41 UTC6152125This Holtzapffel ornamental turning lathe was built in 1881 and first sold in 1885, making it one of the later machines built by the Holtzapffel firm. H2362 has been extensively modified by its previous owners to function as a rose engine, though it can be easily dismounted to serve its original ornamental turning functions. This is a lathe for someone who wants to use it, not just look at it. The lathe is in excellent working condition, though it shows its years. Double mahogany frame with cast-iron bed Original six-step pulley with index plate and index arm Two sets (brass and steel) pivot risers for rocking headstock (rose engine) (The lathe is capable of both rocking and pumping action.) Various rose-engine rubbers Pendulum apparatus for centering rocking headstock Original OT cross-slide, plus highly desirable original cradle (Also newer riser cradle for rose-engine work) Eccentric chuck Dome chuck Oval chuck (missing indexing nose) Sprial surface chuck Eccentric cutting frame (original) Horizontal cutting frame (not original) Universal cutting frame (not original) Drilling frame (not original, accepts small Holtz drills) Spiral apparatus (missing 24-tooth gear) Spiral "donut" gears Reciprocating arm Fluting stops Curvilinear gear (but no curvilinear patterns) Four plastic rocking rosettes, six plastic rocking/pumping rosettes, one brass D12 rocking rosette from a Holtz rose cutting frame Original tailstock Rocking tailstock (mounts to headstock) Two short plainturning tool rests Threading hobs and follower Original goniostat Heavy metal-cutting crossslide Beautifully constructed mahogany chest of drawers for accessories Lidded mahogany chest for small accessories Numerous original faceplates, cup chuck and other holding gear (original two-jaw chuck is inoperable) Three-jaw chuck on H2362 faceplate 1" x 8 tpi mandrel converter 1" collet chuck (fits Holtz mandrel) A nice collection of previous owner's test and practice pieces Complete pedigree and other documentation Equipped With: What is Ornamental Turning? OT WEBSITE: http://ornamentalturners.com/Antique Machinery & ToolsEngine Turning & Brocading Machinesused9286-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152125-used-9286-385-antique-holtzapffel-ornamental-turning-lathe-circa-1881Click To Read more (Download PDF)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba78101ba48bd73afaeb43c90a37cf6b/original-IMG_6257-e1575649656695.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/961a207e2be4cb400670ed609fe5d7a0/original-IMG_6262-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a95b56186e2533bdec8a8f5d148682a/original-IMG_6256-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10c59cfcdd9aa96e8d0f34a76827e2c2/original-IMG_6257-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1377a2e69c8966bb4dfd26cdb8ad95e/original-IMG_6258-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5056a94e5615e72717cfca06da96385e/original-IMG_6259-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f7e5ff7c641de3193a6e0c61d5cf2df/original-IMG_6261-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a5f6556184d0c6c9b3e426457fdbd25/original-IMG_6257-1-768x1024.jpg2024-09-25 15:40:13 UTC61521262 Piece Construction In Light Oak 46 Drawers Circa 1940 Reconditioned AntiqueAntique Machinery & ToolsMiscellaneous Antiquesused0415-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152126-used-0415-cleveland-twist-drill-company-cabinet4'w x 22d x 82"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a3e5f5fcefc0b6355d330ee649712ee/original-0415.jpg2024-09-25 15:40:33 UTC6152127Below listed are the estimated weights and dimensions of the break-downable parts that make up the sum of the US Mint Antique Scale(s): a. 2 -pedestal legs approximate weight 150 lbs each (300#) 36"wide 19"high 20" deep b. 1 -base ” weight 400 lbs ...8 ft long 36" wide 4" high c. 1 -balance beam ” weight 150 lbs 6 ft long 2" wide d. 2 -hanging baskets ” weight 150 lbs EA (300# ) ...5ft tall 3ft by 24" wide at bottom e. 2 -support polles ” weight 40 Ea (80#)...2 1/2″ o.d. X 6ft long f. 1 -center column ” weight 200lbs ...6ft tall 20"by 12" at bottom 8" by 8" at top g. 1 -top support ” weight 100 lbs... 6ft long 1" wide Equipped With: Cast-iron pedestal-style leg bases solid aluminum balance beam with adjustments solid brass pan holders and balance accessories Manufactured at the Denver Mint Circa 1940 First time a gold bullion scale has EVER been released to the public and we have them! Gold balance scale was used to weigh ingots before converting them into gold US coins at Denver and Philadelphia Mints.Antique Machinery & ToolsAntique Scalesused4777-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152127-used-4777-385-antique-us-mint-henry-troemner-type-gold-assay-bullion-balance-beam-scale10,000 oz6'20" diameter96" high x 8' long1700 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6eaf184b7727aabfc237fd7b223bc16/original-IMG_3541-e1560889361836.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e46612386c6038c5afbcdb6498f9fe3/original-IMG_3578.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b96514cac1068f68db3939087904f799/original-IMG_3583.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7aa5846ce4f3b95532a921bcfac78494/original-IMG_3588.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f058be8fda835e8e7b60ba4460a4f96/original-IMG_3589.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5bc59621898face9e98be43b6dfe0ba/original-IMG_3590.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cb07bd5d5f6af4d9d21a1dd7820fd0d/original-IMG_3591.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8569200fd75e54b2c0558915f2707da9/original-IMG_3592.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/033bb08c6eda74db17340aebb4019471/original-IMG_3594.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba2ea487c3f96825b4a9f200f1056e7c/original-IMG_3595.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d91f5768eda76dc66a5256cadeb5430c/original-IMG_3596-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/344a7d34965478d38bacf3d8244170cf/original-IMG_3597-1_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c11360d06e8f62154481db0c8bdecf6d/original-IMG_3598.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6cb57928d2e9129c6e2ae819c5a76193/original-IMG_3598_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e12ad6f461424bc10218c570e6762a21/original-IMG_3601-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da1f9b3939b065d49403a3bbd81f44bb/original-IMG_3603.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29356226e5ea3120bca946ed6b3051ae/original-IMG_3606.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/516a83c909064c98242525b308910324/original-IMG_3621.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8286fe67c9e184fbacd248266da8fc2b/original-IMG_3541.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/959030c4c27a00854e5ea04e94acf97d/original-IMG_3565.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1d5d46a4eff727a0203a0d36b94634a/original-IMG_3566.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3c26d2cc12b354537fe9c27cce58c3f/original-IMG_3572.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8270b77f89ccae4a53efcba30068e14/original-IMG_3732-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38bf4d38a2f3dca887e93215bdfa1ae6/original-IMG_3733-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/036386b8285f1cf65320be5ceb3fab8a/original-IMG_3735-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c105b62409c57d290d8a5a9b03df592/original-IMG_3736-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/391212a2aac32a0fa2cc52e36adc1b76/original-IMG_3737-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4f9fb137a37220d821e3c2ec8176032/original-IMG_3723-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2951a3a9a9fb3bf3ade7b09126a01a40/original-IMG_3724-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e45bc805a6b0bfc5d30a57a679f42780/original-IMG_3726-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50a22ff1d0298f4b0336d6680ec8b36c/original-IMG_3727-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e9db0fac043119414b2feca52c76f9d/original-IMG_3728-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd506227f362feb9bd35601bd65b6cd9/original-IMG_3729-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e662f4c542896cc72dab1222272f854/original-IMG_3730-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9541899bd8be7bd6204ac8eba80c0863/original-IMG_3731-768x1024.jpg2024-09-25 15:40:36 UTC6152128With (31) standard length cutters With (35) additional extended length cuttersAntique Machinery & ToolsOrnamental Turning Lathesused2213-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152128-used-2213-385-antique-holtzapffel-drilling-attachment-for-ornamental-turning-lathehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef411c27690a8137d07dafd965211b3e/original-2213-1-main-e1483808566776.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3998f3eca933ec7d09b3ff0ecd090dd/original-2213-1-main1-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3715af53a4e8f7d47b5d56cf4a70a68/original-2213-2-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b313c003cba606c5562a2fa4472fe21d/original-2213-3-1024x1024.jpg2024-09-25 15:40:25 UTC6152129Consists of: 1 Goniostat for ornamental turning lathe (can be adjusted to any compound angle) 1 Genuine Holtzapffel wood chest, 9-1/2" L to R x 8"F to Back x 7" high. Est. Weight 18lbs Holtzapffel wood chest is equipped with 3 pull out wood work piece/tables in the wood containerAntique Machinery & ToolsMiscellaneous Antiquesused5976-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152129-used-5976-385-antique-goniostat-in-original-wood-chest-for-holtzapffel-ornamental-turning-lathehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/599c073437e7c4eb1c0f17f27d7c536e/original-IMG_6129-e1663172088567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23d3a173f8edcc3e23a0f67f2b19747c/original-IMG_6134-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f42c984441618d74f245929ac718b9a/original-IMG_6129-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a2ef842b2eeae1ee13a8b56e8262a32/original-IMG_6130-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c86655a66ae3d27dfd0b3201f001bba/original-IMG_6131-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74114bda534f0a3046578f0d18eb17cd/original-IMG_6132-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28dd537ae6f58e91265c84c1d3388e7b/original-IMG_6133-768x1024.jpg2024-09-25 15:40:26 UTC6152130Brown & Sharpe no. 608 0-6'' DEPTH MICROMETER MADE IN USA WOOD CASE Model no. 608 0-6'' DEPTH Made in N.Kingstown USA As seen and photographed Wood case size 11" x 5 3/8th x 1-1/2"hAntique Machinery & ToolsMiscellaneous Antiquesused3372-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152130-used-3372-385-vintage-brown-sharpe-no-608-0-6-depth-micrometer-made-in-usa-wood-casehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb463d27eb25e442e79c93bf3161ef73/original-IMG_9440-e1591363846161.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11984d2ade6ce4d3cef199583fdec33a/original-IMG_9439-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67d3a14d944bf944dfaa49d261745f31/original-IMG_9440-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6490e6f909a63ff5d5750f3c730a9873/original-IMG_9441-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb94451a5e32a5fc4571e12060d0a9c6/original-IMG_9432-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27c20491755d957eb567af0942c1b94a/original-IMG_9433-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9e9b5a769c3e0354a889ff8b66d4bf3/original-IMG_9434-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30f255fdf906bc1a3cdb4e1d85084166/original-IMG_9435-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27f9dff04829812af21f3457f4301302/original-IMG_9436-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0032add44e540c7cec9a3519229aa720/original-IMG_9437-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5fea25d687c59a4b8d63093eb545b49/original-IMG_9438-1024x768.jpg2024-09-25 15:40:28 UTC61521312023OMBIGUF18-SG-DSDL- Voltage 220 3ph / 50-60 Hz - 1,0 kW - RPM/min. 150 max - Wire diameter 0,70 - 1,80 mm - Rpm - links 150 max - Net/Gross weight 250/420 kg - Overall dimensions 65x105x156 cm Equipped With: - Electronic system for selection of cable or curb chain - multi language touch screen panel with machine controls and diagnostic alarms - electronic guide device for hollow wire (in option) - option for hollow chain production - laser connection - laser welding unit for small wires (in option) - automatic lubrication system - CE certification - 1.40mm ToolingChain Making/ManufacturingChain Making Machinesnew3927-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152131-new-ombi-model-guf18-sg-dsdl-automatic-machine-for-cable-or-curb-chain-tooled-1-40mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5025eb19284e5f75ab1f5daff5061c9/original-IMG_2659-e1725974940631.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efe14c0d231a63e2056306e0612dcddd/original-IMG_2658-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7679ab2cb3edc8ae892b6185a1e393ea/original-IMG_2659-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e2767e1fd931008a7ee01a07737c067/original-IMG_2660-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee0847fa8634bb374999091ffc1cc3c1/original-IMG_2661-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e78955b516bf87960a5fb45bcadf5d9/original-IMG_2642-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9582364adcca0d04132f1003c443adb/original-IMG_2643-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7178430b584b6ba887f99f652a3b348e/original-IMG_2644-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e262c0accae5b648a658091738c5b76/original-IMG_2646-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d2c76c2b1ab86762af548f34c9ae405/original-IMG_2647-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2953e50406d6aa394bd73cf17ba5ca77/original-IMG_2648-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/24ab20abbd9c01e22c9dfada36433ad2/original-IMG_2649-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/251f58499c086b222c4c306a3c08ae9b/original-IMG_2650-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/656bc08136a00fe9f6b7e1259e193928/original-IMG_2651-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7eff072daec45ed16a1ddf41e1f2a442/original-IMG_2652-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66bbb3e5930948b0937118f1e39da163/original-IMG_2653-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca70b0c327d3718954fed13086ef7c43/original-IMG_2654-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d88b43b21c18e9edf69b08832edda04b/original-IMG_2655-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57dc055c9a0b902dcf59478ff4396c36/original-IMG_2656-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76082e18542dfe1ca75b766bfa23c306/original-IMG_2657-768x1024.jpg2024-11-06 14:17:43 UTC61521327" L-Shaped work handle Top 4-1/2" x 2" cast iron carrying handle Dual 3-1/2" rear work gears Dual 3-1/2" x 1-1/2" bottom mounting flanges with holes for attaching to bench or included mahogany wood base (slitter only - less wood base) Estimated weight: no base: 15 lbs. Estimated weight with wood base" 50 lbs. Equipped With: 12" x 12" x 8" solid wood mahogany base All cast iron construction except tableAntique Machinery & ToolsMiscellaneous Antiquesused3118-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152132-used-3118-385-antique-bench-model-hand-operated-slitter-circa-19004" x 8-1/2"5-1/2"2-3/4"15"(w) x 4"(d) x 10.5"(h)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4eb68ff598c5a90fd7167fb823288c8d/original-3118-1-MAIN-1-e1542316345285.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffc1262c881c5d52daf85b1891c470ad/original-3118-1-MAIN-2-1024x622.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06538a21f171421ac64f272abb30ec82/original-3118-2-1024x999.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e44d08b9b02d3fe3ca125441891e4adf/original-3118-3-934x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e75f81dde810e1018746b6c6db47e23/original-3118-4-1024x995.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21ad212231d64f4bf1335ad5fbca43df/original-3118-5-1024x676.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fa42fc2162cd8e3bd696f47b3750cbd/original-3118-6-865x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44bf25bc1eb18649b0aead2d77bbfbef/original-3118-7-1024x859.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52b127d274760943b035a5d94554194a/original-3118-8-875x1024.jpg2024-09-25 15:40:29 UTC6152133MFG in Bridgeport Conn.USA 110 Volt / 60 Cycle / 1 PH Approx. Max blank capacity .25 Overall size L to R 24" / F to R.16" / 54" h Estimated weight 180 LBS Equipped With: Mechanical Indexing Roll feedAntique Machinery & ToolsMiscellaneous Antiquesused3398-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152133-used-3398-385-wm-h-baker-antique-blanking-press-with-mechanical-indexing-roll-feed-circa-1890https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15b59a1bf86c76a54a521ff458606c82/original-1-e1589917036382.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16d95eda0bd7c1add1fa414597e1a959/original-IMG_9238-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f94ea9cbd7331cb04cb61cd3236f28f6/original-IMG_9239-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9fc76c7d87964bdbed895c4ac743667/original-IMG_9240-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54f40ea6516a1380c5425065f610d053/original-IMG_9241-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2cdcbcd2d8a364e99903ffb338acb9bd/original-IMG_9242-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/365fa36f3fd1828e646d3b480bd14890/original-IMG_9245-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33c1ce93b95532fda3f0b9b04080100f/original-IMG_9246-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2dae07a8a6d75e9571ed46ca0c398f2/original-IMG_9247-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dff3542f1bec4807a31e957153b18e4a/original-IMG_9249-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c3789062979d61542e9b8af16fbcec0/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1755a9ad3aa483efbd3d335300c871a7/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bde6de6faf6223ce66502532f99ea53/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/864ac0445cb261464a1db94e52dde526/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/527c6572c549ef5ed0eecc8903c5a107/original-IMG_9079-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85f1fb559f4ba3b0b0b095cb1883810d/original-IMG_9080-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b1857bec0d23bce63b43d51e0fa09ea/original-IMG_9081-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60f8be3a2590fd17879ec5d90e3fd531/original-IMG_9084-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a302875cb3357b9ffcb8a8229b1eb983/original-IMG_9232-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14965d159ed92b075a23f99045c3941d/original-IMG_9233-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93095dbfc7d2c5ba1f78809bcc10a3f1/original-IMG_9237-768x1024.jpg2024-09-25 15:40:35 UTC6152134220V/3PH/60HZ Incomplete tooling Equipped With: Variable speed drive Heavy duty stand Drive for turn table Incomplete tooling (missing arbor, spiral & knife)Chain Making/ManufacturingChain Making Machinesused3263-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152134-used-3263-100-mgz-type-single-cable-chain-making-machine0,15mm - 0,60mm23" x 22" x 54" (H)225 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/530a66eac46e7e470a2e550d31d41236/original-IMG_8048-e1583512744961.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/047c62c492684a8a91279fee63e1a6b4/original-IMG_8055-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4a3ea02038df6837fb898a1e383e8b4/original-IMG_8048-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/878c167d2f54f1405da8caffbced2813/original-IMG_8049-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/954466a1b9987e4afd48b7c9a116a9f0/original-IMG_8050-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bdea7914975e5bc61fa4b39451729f9/original-IMG_8051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a3b2137a8514ab13b3ae8642b9b4e58/original-IMG_8052-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf9a69bff96727d4019d71aead9b4d78/original-IMG_8053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8b468494210fc37c7b6bb2f87095fcc/original-IMG_8054-768x1024.jpg2024-09-25 15:40:40 UTC61521351992220V/1PH/60HZ Tooled 0,22 mm single cable DC motor 180 volts, 1500 RPM Equipped With: Variable speed control Heavy duty steel stand Turn table assemblyChain Making/ManufacturingChain Making Machinesused3261-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152135-used-3261-100-fico-type-single-or-double-cable-chain-making-machine-tooled-0-22mm-single-cable0,60mm22" x 23" x 55" (h)225 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19ae5f6adc8a593cff71ebb686dfc301/original-IMG_8029-e1583512294591.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7c033a03800c9de52c686d0d661ae7f/original-IMG_8036-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b47594eef52fc7dd9905430c37dd7f5/original-IMG_8037-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ada188f033f55a7699ed2b02dfa216f/original-IMG_8029-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/309fbd19d469d99877e27d754852c6ab/original-IMG_8030-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cee69c4d7eafb9863d21f0378589a5d7/original-IMG_8031-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccf34c4aafde2f8138b7879365708a83/original-IMG_8032-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a0ad149d4d4ac69cff50f463c024da6/original-IMG_8033-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec7d2c9e6f9ac2d135df25e3921fd9c8/original-IMG_8034-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dcffa3b9a2d378a5113bcbfec836f77/original-IMG_8035-1024x768.jpg2024-09-25 15:40:40 UTC6152136Scroll Down To See Video! High Speed Mechanical Type Bead & Core making machine Lighting Automatic Lubricating pump Options: Difference shape and size Ball Mold PLUS PACKING/CRATING FOR EXPORT SHIPPING...$450. EX-WORKS FACTORY CHINAChain Making/ManufacturingChain Making MachinesnewND-BM-S/M/LPawtucket, RIhttps://www.goldmachinery.com/listings/6152136-new-goldpro-high-speed-mechanical-type-bead-ball-making-machinePure Gold, K Gold, Silver, Stainless Steel & Copper0.80 - 3.00mm3.00 – 6.00mm6.00 – 10.00mmTube & Wire1200rpm60 – 120 piece per min.1-360 AdjustableNo material sensorDigital type220V 60Hz$1500 USD Per Set.$13,825.00 USD$17,925.00 USD$20,640.00 USDhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9d3e140cbd63ae99cf4c8282ac693a4/original-5G-gold-bead-1-1-e1594130813245.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46c3f9b3475b2390b05c0d2446655ffc/original-5G-gold-bead-1-1024x706.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc77db0976981e9c39e216623333096f/original-Ball-mould-1-825x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e93174adde6e4ae7afe61a420b48a709/original-IMG_20200516_155606-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd605add6f43a9bad6ebf5ecdd783df2/original-ND-BM-Bead-and-Core-Making-Machine-offer20200701-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ecb0e0131a17a175573a685e2a7b3a6/original-IMG_20200606_164913-768x1024.jpg2024-09-25 15:40:37 UTC6152138Voltage 230 3phase 50/60 cycle Chain sizes 1.40 to 3mm Model FSCHK Speed 130 Rpm Lubrication - Automatic Estimated weight 175KGChain Making/ManufacturingChain Making Machinesused5928-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152138-used-5928-100-fico-snake-chain-machine-model-fschk-tooled-1-6mm-round-snake-chain-new-1994https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dc5ed05f6303e302519fd6b1d3959cb/original-IMG_0089-1-e1689006873319.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39116287abb93027ede6b0e81bc1a3f9/original-IMG_0090-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7ed249f876f21a4ff1f2317af68d67d/original-IMG_0091-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8ae09cd1231f7e2627b763227bde4e1/original-IMG_0089-1-1-1024x768.jpg2024-09-25 15:40:36 UTC6152139Scroll Down To See Video! FAST CHAIN MAKING MACHINE FOR SINGLE, DOUBLE AND TRIPLE WELDED CURB AND CABLE CHAINS. Model BCM-S Fast Chain Making Machine with Complete Set of Tools 0.15mm x 0.70mm Priced for... $14,940. USD Ex-Factory, China Model BCM-L Fast Chain Making Machine with Complete Set of Tools 0.70mm x 1.50mm Priced for... $18,280. USD Ex-Factory, China Optional Items: Plasma Welder for 0.15mm-0.70mm... $3,480. USD Plasma Welder for 0.70mm-1.50mm... $4,080. USD Welding Mechanical Parts Sets.... $2,580. USD Cams for cable chain.... $350. USD each set Mechanical chain collecting plate.... $450.00 USD Microscope... $505.00 USDChain Making/ManufacturingChain Making MachinesnewBCM-SPawtucket, RIhttps://www.goldmachinery.com/listings/6152139-new-goldpro-automatic-chain-making-machine-for-single-double-and-triple-curb-cable0,15 - 0,70 mm0 - 280 links/min220 V 50/60 Hz 1ph6 barAutomatichttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a86301828528b77586e389ad866bdbc/original-cabl_chan.png2024-09-25 15:40:38 UTC61521402023OMBIGUF40NG- Year of mfg 2023 - GUF40-NG - Automatic machine for curb and cable chains produced in single and double versions - Voltage 3ph 380 V 50-60 Hz - Tooled 4.0 MM Cuban Link - Wire diameter 1,80 - 4,00 mm - single link 1,80 - 4,00 mm - double link 1,80 - 3,00 mm - Output rpm - links 60 max - Tooled 4.0 MM Cuban Link Equipped With: - simple tooling setup - electronic system, Ombi patented driven by touch screen to produce cable chain and curb - right and left - electronic system for selection of cable or curb chain - multi language touch screen panel with machine controls and diagnostic alarms - electronic guide device for hollow wire (in option) - chain collector plate (in option) - automatic lubrication system - CE certificationChain Making/ManufacturingChain Making Machinesnew3928-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152140-new-ombi-model-guf40ng-single-double-triple-cable-curb-1-90-4-00-mm-machine-tooled-4-0-mm-cuban-linkhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73509ac3d2079d301dd55d0e3310e3c3/original-IMG_2620-e1725974631307.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6edf425454380d4161dd2657d8e59bc/original-IMG_2634-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b710d863e931baea937e69261ab2c52/original-IMG_2635-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81eb943c2b17e568e070ce18f45fce7e/original-IMG_2636-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef93a2485767f1de92a21efc87429c4d/original-IMG_2637-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a19ab2918fbe1517e42497b264dbe4b5/original-IMG_2639-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e59905d762e29f9d9d37ff410980ea15/original-IMG_2640-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ed5315e46174c91de10fb6b723f77bb/original-IMG_2620-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3a27a0c4e221124ae4c6dee117ed399/original-IMG_2621-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0526d8b0550c0f6443b00df8a6a8ce25/original-IMG_2622-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32c457dabef0900471c5d55220606fea/original-IMG_2623-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/141fc5cfb4baa485600075d511fe58d8/original-IMG_2624-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/62907afede4f28e4b6cc785af63f5624/original-IMG_2625-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe295594367bcbd04589c64577cdd6fd/original-IMG_2626-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a897f82a5085d8f1f35029250ec06f99/original-IMG_2627-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/951752b371affa3333001c59bd4cf577/original-IMG_2628-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2da841c08f3cd0dbbcded27c797159fd/original-IMG_2629-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6421347f346ad13a57940769e875edc/original-IMG_2630-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/085e5fc747d5d173e010cc2ef9dd77e9/original-IMG_2631-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e657a128285318b0e771ae0091af9420/original-IMG_2632-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/304530408ef7252bce8d69d31a672854/original-IMG_2633-768x1024.jpg2024-11-06 14:18:49 UTC61521412007Equipped With: Electronic turntable Chain fault detector Work lamp Factory stand EnclosureChain Making/ManufacturingChain Making Machinesused8591-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152141-used-8591-100-mca-single-curb-chain-making-machine-model-rp006230V/1PH/50HZIncomplete tooling0,20 - 0,45 mmup to 200 links per minute540 x 610 x 1380 mm120 kg ( 264 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8be1c225b267828d3a3896239d377edb/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d546d07f887a77fee04a5b0de3cf4f9/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16ec9960e45d6d429b5ce6a117018d25/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2cdfaeae5b00074af30f9e0469ccace1/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17e59e034fd110ced4fd86aa81fccd9b/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60acd7978264f5f8c8494b958e65e31b/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89a0a068a54f9a65e5cec57cddf5e7c8/original-used-8591-100-mca-single-curb-chain-making-machine-model-rp-006-s-n-136.jpg2025-08-07 13:00:52 UTC61521422023OMBIGUF 60-NG- Year of MFG 2023 - GUF 60-NG - Wire diameter 4,00 - 6,00 mm - Prod. maglie/min./Output rpm - links 30 max - Power headed 3,0 kW 3ph 380 V 50-60 Hz - Net/Gross weight 1450/1750 kg - Overall dimensions 120x150x190 cm - Automatic machine for the production of cable and curb chain right and left Equipped With: - brand new Ombi electronic system - multi language touch screen panel with machine controls and diagnostic alarms - electronic system for selection of cable or curb chain - electronic guide device for hollow wire (in option) - chain collector plate (in option) - automatic lubrication system - CE certificationChain Making/ManufacturingChain Making Machinesnew3929-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152142-new-ombi-model-guf-60-ng-single-double-triple-cable-curb-chain-making-machine-tooled-for-5-50-mm-cuban-chainhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/816caae3da585eb53c3ee48fb5317cd0/original-IMG_2587-e1725974360781.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b46f00849f6d9e34beb9d6039a3c787/original-IMG_2587-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b0ef4bfd781d6a0dc7a8da203f1a4af/original-IMG_2588-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/264778a31b4f6939e9d9c85a855dcb45/original-IMG_2589-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/376c282e4e86580edd5b1379c9a03105/original-IMG_2590-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0680b5f3212569c81703fcab6c75a260/original-IMG_2591-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61fa5badefcca6f17019b79fc645bf17/original-IMG_2592-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed342e02669ed25af47c09f4d2f48b6e/original-IMG_2593-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7cac016e9f92078d762b064b211f659/original-IMG_2594-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f0f4bc9e5d5e2586b79d8bd33d5f217/original-IMG_2595-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f99810d389b40a4a6f0b8402ba966dd5/original-IMG_2596-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d9fd426b88a53f1fbf1964d540b11d9e/original-IMG_2597-768x1024.jpg2024-11-06 14:42:20 UTC6152143L to R movement 3" Tool cutter movement 2 1/2" Radius movement 180 degrees Overall size 12 " x 9 " x 8" H Estimated weight 20 LBS Equipped With: Ratchet lever for quick L to right movement Note: Less top plate for cutter holderAntique Machinery & ToolsMiscellaneous Antiquesused2795-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152143-used-2795-385-rare-antique-rose-engine-turning-machine-guilloche-radius-tool-slidehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/593de63d7c1987fc844ff4ac6dc22446/original-IMG-8598-e1538491439644.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3774f907e2d5c28bc5831e645af8b959/original-IMG-8598-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c943182148a8ad9e603b7b5b378e2ce3/original-IMG-8599-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55cae85b9fffaa58650c5c9e65e9a555/original-IMG-8602-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94a5e0d55f692b76d4342a9c7314267c/original-IMG-8603-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8196b817e5af0c665e856d4642a4bd53/original-IMG-8605-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcb3a1e63a32f43bda6210e13c03bfab/original-IMG-8606-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d9f9cc5ee72b771fba69d8109ec0f64/original-IMG-8607-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c095a5f8454da8252f7009eb727a0e4/original-IMG-8608-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7d26bfd7a9f4e3d9e2f4e12a34457d3/original-IMG-8609-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f66c5af45ecbf6ad55105f5beb817348/original-IMG-8610-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ead3a105c6c5b5f6d29d545aa41e8a9/original-IMG-8611-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f91d1cc64246f8e4ef4cdddc51934aa/original-IMG-8612-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed1d435f7d4d26e0e260baa9aa465631/original-IMG-8613-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/680e27e3509d538268c7eb0f815885eb/original-IMG-8614-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2fdf1cbcc7abaf9837353e35839208a/original-IMG-8615-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cf0064af20ca9c3f22f74c86dfd360a/original-IMG-8616-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc79c410510a8d420c0add3d99d339ef/original-IMG-8632-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb2f3569204eade156f589173045b0d9/original-IMG-8633-768x1024.jpg2024-09-25 15:40:34 UTC6152144220 V/ 1 Ph / 60 Hz Serial 3737 MGZ 90 Series New Tooling available from Gold Machinery upon request. Tooled .005" Single Curb Chain Equipped With: Factory Stand Original Factory ManualChain Making/ManufacturingChain Making Machinesused0211-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152144-used-0211-100-mgz-single-curb-chain-making-machine-model-mgz-93198219" x 24" x 55"200 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9c6780b164294f4564c361ef3c09ee8/original-3737-014-e1372772814865.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e832b03f2c9149f5e3166a46ecae7a77/original-3737-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/920ed1133183a80461df8d4403a2e84f/original-3737-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d49de6cec803c6e066095c9ed8aaaa56/original-3737-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eedd6473c6053630839c6ea91831153f/original-3737-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69232205d7a87bab59139b563f90193c/original-3737-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2daf3fa06d7d02c7fba274936fe66ccd/original-3737-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/505520ce9f0767d7c3c434536659dec1/original-3737-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f29b011916bd2c8740b96e3e0cfc270/original-3737-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efdfa8d6c226ea3628eb075915275638/original-3737-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef9096be64b9ef9b9e6f1250efe13c6b/original-3737-0141.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0896dd9729341ed43ecf4dcb62c8569a/original-IMG_8184-e1584630077387-768x1024.jpg2024-09-25 15:40:46 UTC61521452003230V/1PH/50HZ Equipped With: Electronic turntable Chain fault detector Work lamp Factory stand EnclosureChain Making/ManufacturingChain Making Machinesused8592-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152145-used-8592-100-mca-single-curb-chain-making-machine-model-rp006-s-n-1350,35 mm single curb0,20 - 0,45 mmup to 200 links per minute540 x 610 x 1380 mm120 kg ( 264 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd96fb9f783f3ad71c241dc1a9fa52fe/original-8592.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a060baeb939070b1b2bb274868c8107/original-d3-057.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea2ae6b6a29066435dffba3f08380f83/original-d3-058.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49a667f9e5af0a79e033098d8b2e45f7/original-d3-059.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f31700d109f0d14b3de0da64ab8c56aa/original-d3-060.jpg2025-08-01 14:21:40 UTC6152146CIRCA 1890 HAND-OPERATED - DUAL GEAR DRIVEN TAKEN IN FROM LINDSAY HOENIG CO IN NEW YORK Equipped With: 3 PAIR WIRE TONGS 5 EXTRA DRAW PLATES 4 CAST IRON LEGS MULTI SIZE WIRE REDUCTION DRAW PLATE - 9.8 WIRE SIZES MOUNTED ON MACHINEAntique Machinery & ToolsMiscellaneous Antiquesused2786-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152146-used-2786-385-antique-wire-single-draw-bench-circa-189010" W X 5" L10" W X 65" L17 1/2"72" X 30" X 37"300LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9ff8eefec779059e22c3ff41fd7ca0c/original-2786-1-MAIN-1-e1536674513569.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7791eefb8978a5e1fbdb1ff4eeb81dc5/original-2786-1-MAIN-2-1024x789.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02f8d6325a739b8ab88fe7a7445efb6e/original-2786-2-1024x528.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/425b4f1b0dc632aeb905798780685fb9/original-2786-3-1024x672.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6e374070614c46a3c2fc526d81916ed/original-2786-4-1024x802.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83fc1b016f645f7375e495574f4fabf6/original-2786-5-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e237d6df4f2dc603662cdb3260606bab/original-2786-6-1024x643.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c82f7a34c187d3d1228e5fd16e2387a/original-2786-7-1024x703.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0986e30cd8ad556615f0243527beae1/original-2786-8-503x1024.jpg2024-09-25 15:40:30 UTC6152147The FB18 Machine for individual balls from tube has been suitably studied to obtain a production in continuous. Machine studied and constructed by using tecniques and components that allow their interchangeability years later also. Replacement and setting up of equipments is simple and fast. The FB18 machine is supplied complete with silent cabin realized according to the regulations in force. Equipped with: Forced lubrication Safety devices Fixed and movable protections to assure the security of the operator man. Technical Data: Max diameter of balls 18 mm. Min. diameter of balls 8 mm. Production 55 balls/1 min’. Installed horse power 1,5 KW. Power supply 220 V. 50/60 HZ. 3PH. Dimensions: Length 900 mm Width 850 mm Height 1800 mm Approx.Weight 750 kg Tools List of new sizes available…. Availability: Ex-Factory, Italy Price: €POR Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152147-new-goldpro-balls-machine-model-fb18-automatic-ball-machine-two-holes-max-55-blows-1min-diam-8-18€POR€POR€POR€POR€PORfrom hole to hole Thickness tube€POR€PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bb190f4af5e03955cc1885d625b6703/original-fb18.jpg2024-09-25 15:40:43 UTC6152148Scroll Down To See Video! FAST CHAIN MAKING MACHINE FOR SPIGA CHAINS. Optional: Mechanical or Electronic chain collecting plate Microscope Remarks Spiga chain machine production Curb Chain (L&R) just for adjustment, no need for charged Cams, will be more stable and easy to handle the next process (BK). Model BSCM-S Fast Spiga Chain Making Machine with Complete Set of Tools 0.18mm x 0.65mm Priced for... $13,950. USD Ex-Factory, China Optional Items: Plasma Welder for 0.15mm-0.70mm... $3,480. USD Welding Mechanical Parts Sets.... $2,5800. USD HT Ceramic Electrode Holder.... $160 USD Microscope.... $505. USD Mechanical chain collecting... $450 USD Export Standard Wooden Crate.... $400 USDChain Making/ManufacturingChain Making MachinesnewBSCM-SPawtucket, RIhttps://www.goldmachinery.com/listings/6152148-new-goldpro-automatic-chain-making-machine-for-spiga-spike-chains0,18 - 0,65 mm0 - 250 links/min220 V 50/60 Hz 1ph6 barAutomatic45cm x 78cm x 56cm78Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9633b87cbd1042bd4c42c592c35c5a0/original-chain.png2024-09-25 15:40:38 UTC6152149Voltage 220 3ph Turntable diameter 8" Overall size 10" x 12" x 7" Estimated weight 40Lbs Equipped With: Analog counter Forward and controlsChain Making/ManufacturingChain Equipment / Secondary Operationused6739-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152149-used-6739-100-sisma-spa-turntable-model-f88481b-for-chain-machineshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c643acf58629cebf3768b9bded747fd2/original-IMG_5611-e1657295870916.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44f0c1a7aafcd5dca6fdbfb237733e6f/original-IMG_5616-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/962de0f8edb3edc693af3ba4214e6a44/original-IMG_5611-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a9a6272c810aeefef3be04940a0437d/original-IMG_5612-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c07807d36c39078f0317e0c0d71ad412/original-IMG_5613-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/897e3b70a0c1ff4b0c79a65e3bd16cd4/original-IMG_5614-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a3587ab836e4a34e1e934a60c848183/original-IMG_5615-1024x768.jpg2024-09-25 15:40:46 UTC61521502 CRUCIBLES-HOLDER WITH ADJUSTABLE BRACKETS FOR GAS TORCHES. 2 WELDING POSITIONS ON REFRACTORY CRUCIBLES 2 GAS TORCHES 1 DIGITAL INVERTER FOR SPEED ADJUSTMENT Priced for... 6.000,00 Euros Packing.... 100,00 Euros Ex-Works, Italy Delivery Time 60 Days from OrderChain Making/ManufacturingChain Equipment / Secondary Operationnew726610Pawtucket, RIhttps://www.goldmachinery.com/listings/6152150-new-goldpro-gas-chain-welding-machine-with-2-torches220 V. SINGLE PHASE700X350X730 (h) mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3451eb1fbf94026df585dda89ad23b7/original-7266101.jpg2024-09-25 15:40:43 UTC6152151Overhead Flat Belt Pulley (4-step) and Shaft Wood Wheel 13 change gears 4" 3-jaw chuck 5" 4-jaw Union chuck Equipped With: toolpost ring and rocker drill chuck face plate steady rest knurling tool live and dead centers leather drive belt wrenches Note: Single phase motor and mounting bracket assembly available This lathe was manufactured by the CA Mann Company the seller/dealer was Prentiss Machine & Tool Mann lathes were built by the short-lived (1885 - 1905) Charles A. Mann Company of Providence, Rhode Island.Antique Machinery & ToolsMiscellaneous Antiquesused4356-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152151-used-4356-c-a-mann-10-x-30-lathe-circa-1890-providence-ri-sold-by-prentiss-tool-supply-co-nyhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6775f83b0c6d67a8066a0740b37a5077/original-4356.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3e07178197ce4443acef826dae455be/original-4356-a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8829a72fcc0cb6e81318aeeb3a0fcc84/original-4356-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28a8b5a16019966e3bfebdf4ae2f22c8/original-4356-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc2fc600f4047ee101106baaaa7b2455/original-4356-d.jpg2024-09-25 15:40:35 UTC6152152220V/1PH/60HZ Manufactured in Bien, Switzerland Sliding/angled work head/lapping wheel Sliding motorized work table/parts holder 1/4 HP motor Equipped With: 5 - Lapping discs Wood bench with underneath motor/drive systemAntique Machinery & ToolsMiscellaneous Antiquesused1373-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152152-used-1373-385-antique-henry-hauser-s-a-motorized-lapping-machine49" x 29" x 46" (with bench)175 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c5ca4e8aea8f076e498fa3220df1f6b/original-1373-1-main-e1422458948660.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15cfbe4c79c2e0cb2bb5d5130952bf05/original-1373-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b059621120e56ba0ae9fd2ba25e6f21/original-1373-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26c3f0d04b0a3ef32d7c36c463635fb1/original-1373-9.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29bdd2dd277b4d75e2127c5a854e3d4e/original-1373-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37287dbe2708e00fbb91343a0319559a/original-1373-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb8e384289d6cfc4add7469bc741ad4b/original-1373-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43c2efca5eaae1b5ef67f2dbf882664f/original-1373-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1229eef9ae114051b0bbb1e72f225603/original-1373-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/829379452ecfce58a251037e0172f237/original-1373-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68e19d94007c525b2dcbe35101487011/original-IMG-4769-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5360ef3562a09d18f583a398620ed948/original-IMG-4771-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0b50fe7ca55cfbc074e1c2eac3c6ff3/original-IMG-4772-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ae8e8812f4235f6329f7e5c652e7b98/original-IMG-4773-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fb1b6643a43419af326214c730b0883/original-IMG-4774-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee65dd4b959cf22ece2a3a3db45bc905/original-IMG-4775-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ba041dbf292e7481a89bb9dcfce9838/original-IMG-4777-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63f013a28717a70c790e798b3bd1c8e9/original-IMG-4778-1024x768.jpg2024-09-25 15:40:38 UTC6152153220V/3PH/60HZ Tooled for 0,22mm single cable Equipped With: Variable speed drive Heavy duty standChain Making/ManufacturingChain Making Machinesused3262-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152153-used-3262-100-mgz-type-single-cable-chain-making-machine-tooled-0-22mm-single-cable0,60mm23" x 22" x 54" (h)225 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16c687ae6fcc6d6e8a0d37d214a2c10d/original-IMG_8038-e1583512524420.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9de00d07fe45b51f215e17c2c3217885/original-IMG_8045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/462b31241b7e6e9bace6b35e4625d3a5/original-IMG_8046-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/653fc7a8fc686f7de054a8fa82fb938b/original-IMG_8038-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9121428065a192c746af821b65de7352/original-IMG_8039-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/573cce3916d47f800a60aa82ffe1b6f6/original-IMG_8040-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/444bd5321bebae5f2e2a502ddd890d93/original-IMG_8041-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02728df56df453b18bee1d037bc08f22/original-IMG_8042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e2fac14deaf8e1d9f837f494434e203/original-IMG_8043-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d4d0922aa846d072633da9831edeaca/original-IMG_8044-768x1024.jpg2024-09-25 15:40:40 UTC61521541992220V/1PH/60HZ Tooled 0,18mm single cable DC motor 180 volts, 1500 RPM Equipped With: Variable speed control Heavy duty steel stand Turn table assembly Lamp attachmentChain Making/ManufacturingChain Making Machinesused3260-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152154-used-3260-100-fico-type-single-or-double-cable-chain-making-machine-tooled-0-18mm-single-cable0,60mm22" x 23" x 55" (h)225 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9a281e0c9add8ac267a5c4d8975ccc7/original-IMG_8022-e1583511000817.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a774123537b6a9130dc43656cf6695eb/original-IMG_8022-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ebb45716ab3fd938d2036a221a8ea06/original-IMG_8023-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88b5ab3e8f7bf4a300723e9cff3ac82d/original-IMG_8024-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21ba44a67e285c9d385f451c1f58f990/original-IMG_8026-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81e3b0f38196a0333e28028664c15e32/original-IMG_8027-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d67512f008e29eecd9f96a8694d3289/original-IMG_8056-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b930fc4e0a6fe1b40284c8ffc39266fd/original-IMG_8057-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/981a4c389bf67c2e9fd1fcbc89eda241/original-IMG_8058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25d0706cf3986959cc6ecce87b4a1371/original-IMG_8059-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66d9301a8b1d882edc818382d847555e/original-IMG_8060-1-768x1024.jpg2024-09-25 15:40:41 UTC6152155Machine on stand, centesimal adjustment of balls diameter, adjustable balls input speed, without tools, in compliance with CE standards. 230V/50Hz single phase power supply (60Hz up on request). Availability: Ex-Factory, Italy Price: POR Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152155-new-goldpro-ru-ball-rolling-machineTested set of tools to roll LOOSE BALLS, for one size from mm. 2.00 to mm. 12, complete with disks group and canalizing group. € 4.440,00Standard packing. € 600,00Tropical packing. € 720,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2cfc9d3c50dd47d809c2e1de86ca276/original-ru.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc76cdabcb2ef5def2c634b1413bbbe0/original-ru-1.jpg2024-09-25 15:40:42 UTC6152156Machine on stand with vary-speed, forced lubrication, wire and strip presence sensor, automatic chain collecting spool, without tools, in compliance with CE standards. 230V/50-60 Hz single phase power supply. Availability: Ex-Factory, Italy Price: € POR Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152156-new-goldpro-mpl-mini-ball-chain-machineTested set of tools in HSS for chain: BALL chain, for size mm. 0.80 and 1.00. MIXED chain, for size mm. 0.80 and 1.00 (to be used with MPL.G57). BARREL chain, for size mm. 1.00. € 3.400,00Tested set of tools in HSS for chain: BALL chain, for size mm. 0.75. € 5.590,00Tested set of tools in HSS for BALL chain, for one size from mm. 1.20 to mm. 1.80. € 2.500,00Tested set of tools in HSS for chain: MIXED chain, for one size from mm. 1.20 to mm. 1.80 (to be used with MPL .G57). MISTA OVAL chain, for size mm. 1.80 (to be used with MPL .G57). BARREL chain, for one size from mm. 1.20 to mm. 1.80. CAMILLA chain for size mm. 1.50, mm. 1.80. € 2.610,00Tested set of tools in HSS for chain: OVAL chain, for one of the following sizes, mm. 1.20, 1.50, 1.80. LOOSE OVAL chain, for one of the following sizes, mm. 1.20, 1.50. € 2.870,00Tested set of tools in HSS for MIXED LONG chain, for one of the following sizes (to be used with MPL .G57): 1×3 one ball dia. mm. 1,20 and 1 barrel three times long. 2×2: 2 balls dia. 1.00 mm. and 1 barrel two times long. 3×2: 3 balls dia. 1.00 mm. and 1 barrel two times long. Tested set of tools in HSS for MIXED LONG OVAL chain, for the following size (to be used with MPL .G57): 2×2: 2 balls dia. 1.00 mm. and 1 long oval two times long . Tested set of tools in HSS for MIXED LONG CAMILLA chain, for the following size (to be used with MPL .G57): 1×3 one camilla dia. mm. 1.20 and one camilla three times long. € 3.640,00Binocular attachment group. € 210,00Wire straightener group. € 1.840,00Standard packing. Tropical packing. € 430,00 € 600,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ad54969adf7f271707d15e1f75146b7/original-mpl.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecc26152c5c0f548c9963b3444e51c31/original-mpl-1.jpg2024-09-25 15:40:43 UTC6152157The balls Machine FB5 has been constructed to produce individual balls from tube or from plate. Suitably studied to obtain a continuous production. Automatic machine with high speed, equipped with safety devices both to avoide the production of faulty balls, and the security and physic integrity of the operator man. The adjustment of tool is very simple and fast thanks to some registers that simplify this work. The components of balls machines are easily interchangeables, made by control machines, both initially and finally tested. Forced lubrication on all wear points. Min. diameter balls 1,50 mm. Hole from 0,5 to 0,8. Max diameter balls 5,5 mm. Hole from 1 to 2. Plate thickness 0,15-0,38. Plate width 4,70-17,5 mm Max 180 balls/1′. Installed horse power 1.5 KW. Power supply 220 V. 50/60 HZ. 3PH. Technical Data: Dimensions: Length 500 mm Width 600 mm Height 1800 mm Approx.Weight 380 kg Accessories: Couple of dies 2/3 mm (sizes of holes at request) …€POR Couple of dies 4/5/5,5 mm (sizes of holes at request) …€POR Couple of dies for oval, drop, tear, bone, pearl, square …€POR Couple of dies 4/5/5,5 mm (sizes of holes at request) …€POR Couple of dies wire forming . …€POR Couple of pliers for feed …€POR Couple of die holder completely grinded with fixed shoulder …€PORe Outgoing aspiration for extracting balls …€POR List of new sizes available…. Availability: Ex-Factory, Italy Price: POR Plus packing & cratings Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152157-new-goldpro-balls-machine-model-fb5-automatic-ball-machine-two-holes-max-180-blows-1min-diam-2-5-5from hole to hole Thickness tubehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e76b681f74956508d0221f05d4a6d6e7/original-fb5.jpg2024-09-25 15:40:43 UTC6152158Machine on stand, with vary-speed, forced lubrication, wire and strip presence sensor, automatic chain collecting spool, wire straightener, without tools, in compliance with CE standards. 230V/50-60Hz single phase power supply. Availability: Ex-Factory, Italy Price: € POR Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152158-new-goldpro-pll-ball-chain-machineTested set of tools in HSS for one of the following sizes: BALL chain, for one size from mm. 1.20 to mm. 5.00, and TIGHT BALL mm. 3,00. DOUBLE BALL, for size mm. 2,00. € PORTested set of tools in HSS for MIXED chain for one size from mm. 1.20 to mm. 3.50. € PORTested set of tools in HSS for OVAL, MIXED OVAL, LOOSE OVAL, SPINNING, LOOSE DROP and DROP chain. € PORTested set of tools in HSS for chain BARREL, CYLINDER and DISCO. € PORTested set of tools in HSS for MIXED LONG chain (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 1×4 one ball of mm. 1.50 and a barrel four times long. 1×4 one ball of mm. 2.50 and a barrel four times long. € PORTested set of tools in HSS for MIXED LONG chain (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 1×3 one ball of mm. 1.50 and a barrel three times long. CAMILLA 1×3, one ball of mm. 1.50 and one three times long. € PORTested set of tools in HSS for MIXED LONG chain 3×2 (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 3×2 three balls of mm. 1.20 and a barrel two times long. € PORTested set of tools in HSS for MIXED LONG chain (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 1×7 one ball of mm. 1.50 and a barrel seven times long. 3×7 three ball of mm. 1.20 and a barrel seven times long. 4×7 four balls of mm. 1.20 and a barrel seven times long. 2x2x7 two barrels (two times diameter long) of mm. 1.20 and a barrel seven times long. € PORTested set of tools in HSS for MIXED LONG chain (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 4×7 four balls of mm. 1.00 and a barrel seven times long. €PORTested set of tools in HSS MIXED LONG chain (for PL machine, to be used with RCM .G57 wire straightener group) for one of the following sizes: 3×4 three ball of mm. 1.50 and a barrel four times long. 3×7 three ball of mm. 1.50 and a barrel seven times long. €PORTested set of tools in HSS for PEANUT chain mm. 3.00 and CLEO chain mm. 3.50. € PORBinocular attachment group. € PORWire straightener group (only for PL machine). € PORStandard packing. € PORTropical packing. € PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84ea7c0f5470167c9a2d116745a15a35/original-pll.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b1a9167ce45c67da9b11cb2462e6ac6/original-pll-1.jpg2024-09-25 15:40:42 UTC61521592025FastiSB5MACHINE FOR LOOSE BALLS Machine on stand, single phase power supply, variable speed, forced lubrication, strip end and tube end sensor, ball passage sensor. Model suitable for production of medium-small size balls, ovals, barrels from tube and strip by simply changing tools. Use of compressed air is necessary. The SB5 automatic machine is suitable for the production of loose beads, from plate or tube, for small and medium loose beads dimensions. In the case of plate production, the machine works with a coil of plate sheared to a precise width, which is later drawn into a cylindrical tube by an extruder placed before the pressing station. The tube thus obtained, which is not welded, passes into the moulds where it is shaped into a small round, oval, cylindrical or cube bead, depending on the moulds that have been used. In the case of welded tube production, a spindle with self-centering pincers gradually feeds the tube. This is a completely mechanical machine which guarantees high productivity and precision. This characteristic makes it a suitable model to be used both in goldsmith workshops, where frequent changes of tools and measures are needed, and in industries: here, the SB5 machine can be used in batteries set on fixed measures and fed with large quantities of tubes.Chain Making/ManufacturingBeads and BallsnewSB5Italyhttps://www.goldmachinery.com/listings/6152159-fasti-sb5-bead-ball-making-machine-small-to-medium-diameter230 Volts160 Balls Per Minute400W108cm x 88cm x 185cm560 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c719329fa476c9bd3dc91b00247486a2/original-fasti-sb-5-bead-ball-making-machine-small-to-medium-diameter.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46441300c3490955fa999e4a78138660/original-fasti-sb-5-bead-ball-making-machine-small-to-medium-diameter.jpg2025-04-08 12:50:44 UTC6152160Machine for the cutting of passing rings by optical detector and milli-metyrical decimal counting with double program to leave the shaped endings on chains of alternate type (like figaro ) or o cut out the little bar in case be equipped with an optical collector with double alternate rotation which arrange the chain in Technical Data: Weight Kg 55 Size 60x70x44 Electric network 220 VOLT - 50/60 HZ - WATT 300 Controls and programming General functions driven by plc; suitable program of optical or milli-metrical/decimal reading; double reading program to carry out alternate cuts on special shaped endings; programming of constant speed;programming of the number of pieces to cut Machine speed variable System functioning Pneumatic system running the cut; device with optical reader to count the passing rings; varying power of the cutting system to cut solid wire of mm 3.5/4; chain drive by " step by step" motor Security protection Sensor at earth to stop w0rking in case of anomalous functions Feeding Compressed air feeding with regulator Availability: Ex-Factory, Italy Price: € 13.755,00 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Equipment / Secondary Operationnewfb-cPawtucket, RIhttps://www.goldmachinery.com/listings/6152160-new-fb-c-chain-cutter-with-optical-millimetrical-system-of-reading750 pieces of mm 50https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a5537f21b0e2cb9de950bf744bd9429/original-12.jpg2024-09-25 15:40:45 UTC6152161This is a compact machine: because of its dimensions, it can be placed even on a work-desk. its performances give enormous advantages thanks to the perfectly sharp cuts and the exactness of the length, given by its internal plc numeric control. Technical Data: Weight Kg 47 Size 73x69x34 Electric network Volt 220 - 50/60 hz - watt 250 Cut technology device Cutting device with ax actioned pneumatically Controls and programming General functions driven by plc;electromechanical count of pieces with manual reset. System functioning Cut length with possibility of decimal programming 0 m/m. to 999.9 m/m;possibility of adjustment of cut power in order to cut the 2 m/m. solid wire;transit through the cutting device not over 6 m/m; Feeding Inlet for compressed air including regulator. Availability: Ex-Factory, Italy Price: € 8,400 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Equipment / Secondary Operationnews-rPawtucket, RIhttps://www.goldmachinery.com/listings/6152161-new-s-r-electro-pneumatic-chain-cutter2000 pieces for 250 mm ( medium speed )https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef341d49567306377b27f780b716955f/original-15.jpg2024-09-25 15:40:45 UTC615216232600.0Proceed as follows to refine alloys in which the percentage of gold does not exceed 25%: Melt the product to refine and form grains using the special shotblasting machine. Load the product reduced to grain in the special bags of Teflon fabric. Dissolve the copper and silver in the DR 1418K/PAE dissolution plant . Recover the product inside the Teflon bags. Capacity 1kg/pure gold /cyle (2/3 cycle /24h.) The supply is as follows: DR 1418K/PAE plant complete with power board for managing the working time and temperature for each reactor. Each of the reactors is provided with a magnetically driven stirrer. storage tanks are installed in the structure for storing the following products: 50 litre tank for storing acid for storing acid already used 50 litre tank for rinsing water 1 m³ gasometer for the nitric oxides produced during the dissolution phases and for abating them by means of oxygen to transform them into reusable nitric acid Technical Data: Overall dimensions Total length 1800 mm Heigth 3000 mm Total width 1200 mm Weight (when empty) 400 kg Technical features Reactor nominal capacity 30 liters Alloy dissolution capacity 3 kg/cycle Gasometer nominal capacity 1.5 m3 Max. operating temperature 100°C Loading pump Body PVDF Membrane PTFE teflon Spheres and seats PTFE teflon Cycles per min. 170/min. max. Capacity per cycle 340 cc Hollowing time Dissolution process is performed very quickly, therefore allowing to carry out 3 or more working cycles per day, granting a reduction of hollowing time of about 50 to 70% compared with traditional methods. Automation and Process Control The whole process is controlled by a micro-processor board which is of very simple use and allows even unskilled operators to run the plant satisfactorily. Process control, as well as all safety devices, are ensured also during power black-out. Environment Protection Closed-circuit cycle, without any emissions of gas or fumes in atmosphere and without any container under pressure. Cost reduction Cost of the copper dissolving process is reduced of about 80% compared with traditional systems. Installation Set up is carried out by highly skilled technicians. Certification and safety Electrical safety: according to Directive 73/23/EEC and subsequent amendments, rules EN 60204-1. Emissions of gas: according to Directive 80/779/EEC - 82/884/EEC - 84/360/EEC - 85/203/EEC. Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingChain Equipment / Secondary Operationnewdr1418Pawtucket, RIhttps://www.goldmachinery.com/listings/6152162-new-innotek-n-01-dissolving-plant-model-dr1418k-paeaccording to Directive 98/37/EEC.€850,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc342be657be72353dda2d69625a5fa1/original-dr1418k-pae.jpg2024-09-25 15:40:45 UTC6152164Available Ex-Factory, China.Chain Making/ManufacturingChain Equipment / Secondary OperationnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152164-new-goldpro-automatic-chain-cutting-machine-mechanical-typeCOMMODITY & DESCRIPTION QUANTITY UNIT PRICEAutomatic Chain Cutting Machine – Mechanical Type ( including One complete set Tooling ) Chain Size: 0.5 – 1.80MM ( All Chain Model) Size Adjust : 0 – 100mm ( Basic Model ) Speed : 80 – 100 pc/min. 01 3,200.00Complete set Tooling form ( 0.5 – 1.80mm ) 01 800.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c3d99b1a0122d3874d411e208f57ac3/original-111.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/530f868a69ff657202485f71e799a938/original-22.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/019b6b7b6f2546f6ba6ea8b5ab5c759e/original-33.png2024-09-25 15:40:44 UTC6152165Availability: Ex-Factory, CHINA Price: $ 52,480.00Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Making MachinesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152165-new-goldpro-milano-bead-ball-cnc-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19052a49e287ff5fe65ac174e5985a8a/original-CNCBeadInsertMilanoChainMakingMachine--1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c2687d8f0304a13c4b44e8a3949d3e2/original-CNCBeadInsertMilanoChainMakingMachine--2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d87b74033de7433bb2d19212e074601/original-BeadInsertMilano-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ecaf62acb9aa3eb456d65eae4e857af/original-BeadInsertMilano-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9338806a3fa1a1e25fb1b06a5eb28963/original-BeadInsertMilano-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d1608d49442c60e7650593a64c7b5a0/original-BeadInsertMilano-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fe1a495c6e3d5030871a38e97c34c51/original-BeadInsertMilano-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7c47386929fdaf9ffaf604a195af938/original-BeadInsertMilano-6.jpg2024-09-25 15:40:40 UTC6152166Scroll Down To See Video! FAST CHAIN MAKING MACHINE FOR VENETIAN CHAINS Optional: Mechanical or Electronic chain collecting plate Microscope Model BBVM-SU - Upper Open Chain Fast Venetian Chain Making Machine with Complete Set of Tools 0.08mm x 0.32mm 0.25mm x 0.80mm Priced for... $18,900. USD Ex-Factory, China Model BBVM-SB - Bottom Open Chain Fast Venetian Chain Making Machine with Complete Set of Tools 0.08mm x 0.32mm 0.25mm x 0.80mm Priced for... $14,900. USD Ex-Factory, China Model BBRV-S - Round Box Chain Fast Round Box Chain Making Machine with Complete Set of Tools 0.25mm x 1.30mm Priced for... $9,900. USD Ex-Factory, ChinaChain Making/ManufacturingChain Making MachinesnewBBVM-SUPawtucket, RIhttps://www.goldmachinery.com/listings/6152166-new-goldpro-automatic-chain-making-machine-for-venetian-chains0.08 x 0.32 – 0.25 x 0.80 mm0 - 380 links/min220 V 50/60 Hz 1ph6 barAutomatichttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51bdbab2619202b335ef000428538fc3/original-VChainMachine.png2024-09-25 15:40:38 UTC6152167Suitable for the production of medium to large-sized round, oval-shaped or barrel-shaped balls by simply chaining tools. Sensor detects presence of tube. Digital operator control panel. 230V/50-60Hz Single Phase Power Supply Variable Speed Forced Lubrication Compressed Air Required Available Tooling: Barrel Cylinder and Oval tool Ball tool, 6mm to 20mm Produces Balls As Below: Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingBeads and BallsnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152167-new-goldpro-sb20-bead-ball-making-machine-medium-to-large-diameterfrom  6,0 mm to 20,00 mm80€ 600,00Tested set of tools for loose ball, for the following sizes:7,00 mm and 8,00 mm.Hole diameters and tube thicknesses to be verifiedand confirmed. €4.500,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a80374228ae219ffe4854b19030ba4d/original-sb20.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20785ee734f3c547eeeff7895c88f399/original-2.jpg2024-09-25 15:40:43 UTC6152169Bench ModelChain Making/ManufacturingChain Equipment / Secondary Operationused0714-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152169-used-0714-used-motorized-hank-turning-devicehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92f23c0a696e8a31b656a07061a77f44/original-0714.jpg2024-09-25 15:40:46 UTC6152170Patent # 10445 Circa 1900 Frank B Grover Co/New York Equipped With: Wood Bench Lamp Attachment Extra Brass Fonts-Letters & Numbers Extra Adjustable Tilting Table Additional Photos:Antique Machinery & ToolsMiscellaneous Antiquesused2057-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152170-used-2057-antique-frank-b-grover-co-new-york-2-dimensional-engraving-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5192e429252db026d62ed1dc68a9dcaf/original-2057.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c29413e1983cce7f06c6cee6e62e416/original-2057-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/937d89982e9b8106ba587d3688936236/original-2057-3.jpg2024-09-25 15:40:33 UTC6152171110v 1ph 60 cycle S/N E308-4-79-0 Maximum chain size,wire to be .090 Approximate Settings For Machine (1/4 to 7/8) (1/2 to 1" 3/4) (3/4 to 2"1/2) (1"to 3"1/2) (1"1/4 to 4"1/2) (1"1/2 to 5 1/4") (1 3/4" to 6") (3"to 10"1/4) (4"5/8 to 16") (6"1/4 to 21") (7" 3/4 to 26") (9"1/4 to 31")(10"3/4 to 36 1/4") Micrometer fine adjustment range .925 - .180 Roller size.490 Equipped With: Batch counters #1 & #2 ManualChain Making/ManufacturingChain Equipment / Secondary Operationused9306-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152171-used-9306-105-crafford-automatic-chain-cutter-machine22" x 25" x 28" high150 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3abfef17c0bb9308954c92c48855f7d/original-E308-4-79-0-002-e1394918163573.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a756f84e09db89f832ded602784dfd34/original-E308-4-79-0-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df5c84b248c6b86e33e44a783b45ea14/original-E308-4-79-0-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b001ece7b4b8ac47546d78b46d09bea/original-E308-4-79-0-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96d31818e67f8434d587d1add9d44df2/original-E308-4-79-0-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/488b93f897044ce3c5d42f5b7086c27f/original-E308-4-79-0-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29f6959cf1f911f32bb8086cb8dda957/original-E308-4-79-0-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48529f0b4813baee57f12df64df05780/original-E308-4-79-0-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/481679dbf4da1863de57dd57e55ff85e/original-E308-4-79-0-0021-768x1024.jpg2024-09-25 15:40:48 UTC6152172Automatic-control device for feeding plated wire used in the production of hollow chain. Adaptable to any type of machine. It recognizes and guides differences in colour and gloss when feeding two different metals. Technical Details: Comes equipped with interchangeable bushings. Accessories: reel-holder instead of the skein-holder cone...€ 416,00 stainlees steel or alluminium reel... € 99,00 Incoudes skein holding cone Additional Photos: Availability: Ex-Factory, Italy Price: € 2.980,,00 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Equipment / Secondary OperationnewGF105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152172-new-goldpro-small-hollow-seam-sensor-device-gf105from 0,5mm to 1,50mm5 Meters per minute (Maximum)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3a6f845008566c031b0c79f5870b30c/original-GF105.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78524abbc73f88d967a50aef363a4bf1/original-GF105-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dfc6a94586fd230dbff73dd864c8e4d/original-GF105-2.jpg2024-09-25 15:40:43 UTC6152173Used Progressive Die for Quality Tags mounted In 4 x 4" Die SetChain Making/ManufacturingChain Equipment / Secondary Operationused1711-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152173-used-1711-used-progressive-die-for-quality-tagshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ba57b8b1d184d06455d61a3b6aba35b/original-1711.jpg2024-09-25 15:40:46 UTC6152174110v 1ph 60 cycle S/N C185-4-7-74-d Maximum chain size,wire to be .090 Approximate Settings For Machine (1/4 to 7/8) (1/2 to 1" 3/4) (3/4 to 2"1/2) (1"to 3"1/2) (1"1/4 to 4"1/2) (1"1/2 to 5 1/4") (1 3/4" to 6") (3"to 10"1/4) (4"5/8 to 16") (6"1/4 to 21") (7" 3/4 to 26") (9"1/4 to 31")(10"3/4 to 36 1/4") Micrometer fine adjustment range .925 - .180 Roller size.490 Equipped With: Batch counters #1 & #2 ManualChain Making/ManufacturingChain Equipment / Secondary Operationused9303-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152174-used-9303-105-crafford-automatic-chain-cutter-machine22" x 25" x 28" high150 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bceaad3277de5ce0057f32bed4c56b91/original-chain-cutter-009-e1394917740567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/989e82a5f1638d6c07ff491ac79c97a4/original-chain-cutter-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a216a7b30520f16455d2dda7a55921b/original-chain-cutter-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33bafa65b2db5155f55303d640e32ac5/original-chain-cutter-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/271479b02a21c4ca4f6180328ea313b9/original-chain-cutter-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e196782e34f4af19bc056dbcc2c5606/original-chain-cutter-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfd50a5290c8e5941a1040943c8a4c94/original-chain-cutter-0091-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecc2db7ed7aaec834b86e46fc9c8caaa/original-chain-cutter-002-1024x768.jpg2024-09-25 15:40:48 UTC6152175220V/1PH/50-60HZ For straightening double, triple, quadruple chains with wire size up to 2,00 mm For twisting chains with wire size up to 0,60mm Equipped With: Winding device Digital controls Electronic variable speed Traversing spoolerChain Making/ManufacturingChain Equipment / Secondary Operationused8081-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152175-used-8081-105-ciemmeo-model-mrc4-automatic-chain-twisting-straightening-machine-s-n-187624" x 46" x 19" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ba7660dd99471c1bd328772febd3e51/original-8081.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9530836c7676629965fc3e7596272e37/original-ciemmeo-012-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4697185ba92f8fb9483181d0f79636fe/original-ciemmeo-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/617fd12e0c6b071c879cd4d8f4111f07/original-ciemmeo-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8329a6867717955f8936a455f54b13b/original-ciemmeo-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f904b8d80ae89c974c2d5929150ff4e/original-ciemmeo-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8498af0def361296c0e556ad756402bf/original-ciemmeo-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72856b357c0bd15ccc10d50dddfcdddd/original-ciemmeo-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a54ce07e165f1072ba3fc3c450e5c9d/original-ciemmeo-014-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20ca7b9576dd5038b16b009707716009/original-ciemmeo-013-1024x768.jpg2024-09-25 15:40:49 UTC6152176Ring mesh automatic making machine Ring Mesh model RM can produce mesh with stainless steel material. And each ring can be laser welded The RM machine can produce Ring Mesh with following details: wire diameter from 0.40 to 0.80 mm ring diameter from 3.00 to 6.50 mm output 60 – 80 rings/minute Equipped With: MACHINE OPTIONS: OFF_ATTR - Complete Tooling to make one size OFF_ATTR - Laser connection MEL32002 - Optical Fiber 600µ 3mt MEL32003 - Focal Ø35 focus 70 (straight) ALL PRICED UPON REQUEST Machine Priced for... POR Available Ex-Factory, Italy Training AvailableChain Making/ManufacturingChain Making MachinesnewGoldPro_Ring_MeshPawtucket, RIhttps://www.goldmachinery.com/listings/6152176-new-goldpro-ring-mesh-making-machine-package3,00 - 6,50 mm0,40 - 0,80 mm60 - 80 max0,75 kw220 V / 50-60 Hz120/180 kg98 x 72 x 83 cmYAG 60Whttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/951b94a547b22ba9072e2a1ca6355a0e/original-ring-e1512395256508.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac6a0a989f60a73c7ad8559bfc8a57c6/original-2016-01-14_750x1000_18-01-12_catenaanelli-e1512395352878.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/875df26d25ce5c866afee9bb096fb545/original-image00003.jpeg2025-01-08 13:56:58 UTC6152177Scroll Down To See Video! S/N 1256 For Formed & Soldered Pieces Tooled for Chain Safety Catch 0.80mm wire size Production 50 Pieces/M 220V/3phase/0.33hp Overall size 38" x 26" x 40 " h Estimated weight 650 lbs Additional tooling as photographedChain Making/ManufacturingChain Equipment / Secondary Operationused5000-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152177-used-5000-105-ombi-mv-1-auto-machine-tooled-for-chain-safety-catch1.00mm for Pieces Up to 40mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a9cb0e9a8be1fce6e7f3d867dc3f89f/original-5000.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/627d0de2991306e854d5cbb30b30e5f1/original-IMG_3026-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1fdf0bd0401384f555ed5592f549190/original-IMG_3027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d57dc395f85fed1234067cd5cf5469e/original-IMG_3029-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7bbd2f7b377732e1fc2d6ea3b268c1c/original-IMG_3031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2791ca418ae540f428f880f3ef17421c/original-IMG_3032-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec761787e9cab752645fe362ed8e279a/original-IMG_3033-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/304b2c5f9d15d012d36ff244957fe855/original-IMG_3034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/627e30aee3b5f7ca1b3383b36b128cc3/original-IMG_3035-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca1559c7e9dd6c09709232d3cf58c788/original-IMG_3036-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e1df41dedd6a88983f1c9a283db8fa5/original-IMG_3037-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04c2642b5a024ee5e6b31e236c2a4436/original-IMG_3039-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b68452d1d040d4474d494e32fe0611d2/original-IMG_3040-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97a2f3deb8c1bc8203b2f83ce5edbc8c/original-IMG_3053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c56257e9288f979a49b3e498fb8a4612/original-IMG_3054-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a26489b93bf779fbfcb395e738530cb9/original-IMG_3056-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49537529229d1027cf9d5e2e0113b487/original-IMG_3058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3b36677c09ddcf43d9013017a8679c6/original-IMG_3063-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/028368f3c55e303c4e6b58c80d4307a5/original-IMG_3064-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3772597a3978e6a09800d22e20aafaff/original-IMG_3065-1024x768.jpg2024-09-25 15:40:57 UTC6152178220-380V/3PH.650HZ Adjustable die closing Equipped With: Forced lubrication Variable speed Chain take-up Chain pay offChain Making/ManufacturingChain Hammering Machinesused7509-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152178-used-7509-120-galato-30-ton-chain-hammering-stamping-power-press-high-speedknuckle joint8205-1/2 HP44" x 36" x 81" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dd9ec0ce15ac4b7a8413b543de7ccbc/original-new-Gold-029-e1381695642916.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10846e210f31871a8cb4dd49885aa3a3/original-new-Gold-028-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc7550b5c81eb3c583a6f23fd8098ef0/original-new-Gold-0291-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82e66baa4219fe61bf7bb2a03ff70dd9/original-new-Gold-030-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c67b32ff1bac87c5c02ebb8c45febb2/original-new-Gold-031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0cbb893774c3d73052ec4bb4cbfa5819/original-new-Gold-032-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08de09fe6ca46c96afd7d62867de7ec4/original-new-Gold-033-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa69ffb216f69d5476515ab01a14dd20/original-new-Gold-035-1024x768.jpg2024-09-25 15:40:50 UTC6152179150.0Chain Making/ManufacturingChain Hammering Machinesused5191-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152179-used-5191-120-universal-hammering-stamping-block-die-holder-jewelry-chain-making.615w x 1.00"h x 1.680"lhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdb8778ffd284c0b13f6d75467a9e568/original-5191.jpg2024-09-25 15:40:46 UTC615218077967.5Diamond cutting machine Mod. R-I/3, with 5 controlled axes, suitable to carry out varied decorations on flat or convex chains and strip. The machine is fitted out with a strong treated cast-iron structure, one vibrating vertical head interchangeable with a horizontal one, turning on its own vertical axis, a chain pulling unit with tilting axis interchangeable with a supporting unit for strip. The machine is complete with base, electric and electronic plant, LCD screen and keyboard, pre-arranged for CAD-CAM programme, protection cover, service spanners and spare belts, certification CE 2006/42. EQUIPMENTS N.1 Cutter with pincer diam. 6 mm.Eur 630,00 N.1 Head for stars c/w N. 1 tool Eur 2.900,00 N.1 CAD-CAM programme Eur 5.900,00 TOOLING FOR CHAINS N.1 Unit supporting the tooling for chains Eur 5.300,00 N.1 Bronze tooling Eur 460,00 N.1 Steel tooling Eur 600,00 N.1 Bronze tooling with adjusting device Eur 580,00 N.1 Steel tooling with adjusting device Eur 710,00 TOOLING FOR “STRIP” (SLAB) N. 1 Unit supporting the tooling for strip Eur 3.600,00 N. 1 Tooling for strip (it’s required 1 per each strip size) Eur 440,00 N. 1 Lubricated Vacuum pump LB18 Eur 1.500,00 DIAMOND TOOLS N.1 Diamond tool 160°/3 mm. Eur 230,00 N.1 Eccentric diamond tool 160° R=1.0 Eur 190,00 N.1 Diamond tool for stars.Eur 230,00 TOTAL AMOUNT (packing excluded) Eur 102.970,00 N. 1 Wooden case packing Cm. 170x170x198(H) Gross Weight Kg. 900, Net Weight Kg. 650 Eur 740,00 Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152180-new-ompar-r-i-3-patented-cnc-diamond-cutting-machine-for-varied-decorations-on-chainV.230 – 50/60Hz. 1-phase Eur 79.700,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb9d8781131c9bd4a04c912e6aa02271/original-1.jpg2024-09-25 15:40:48 UTC615218155080.0Diamond Cutting machine mod. RA/2600 with two horizontal heads suitable to carry out cutting and forming on 4, 6, 8 sides on rope chain, ball chain and hammered with geometrical shape chains; concave and convex bevelling and forming on chain with max. dimension 1,50mm wire diameter. The machine is fitted out with two very high precision spindles, two adjustable 4-tools cutter 120 mm. diam., with vacuum system for gold chips recovering.Discs 120mm. diameter mounted on carriage with double adjustment: both for centering and cut depth with reading on centesimal gauges. It Is complete with vacuum unit, electric plant, n.1 set of optical layers, base, service spanners and spare belts, CE 98/37 certificatIon. Power supply: V.230/400 50/60Hz. 3-phase 1 Chain driving guide 1 Set of brass discs for rope or ball chain 1 Set of steel discs for chain 2 Steel disc holder flanges 2 Disc locking screws 1 4-tools cutter 1 Dragging chain winder Eur 1 Centering jig/4 diamond tools holder w/ optical layer 1 Pin for centering-jig (1 for each chain size) DIAMOND TOOLS 1 Set (4 pcs) lapping diamond tool for 4 sides 1 Set (6 pcs) lapping diamond tool for 6 sides 1 Set (8 pcs) lapping diamond tool for 8 sides 1 Wooden case packing DIMENSIONS & WEIGHTS Gross dimensions: Cm. 105 x 110 x 188(h) – Gross weight: Ka. 617 – Net weight: Ka. 517 Delivery: Approximately 40 working days from your order confirmation Availability: Ex-Factory, ItalyChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152181-new-ompar-ra-2600-diamond-cutting-machine-for-chains-with-geometrical-sectionhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca6a51767c7e248e9b1cbafd4b8a5c55/original-RA-2600.jpg2024-09-25 15:40:49 UTC6152182Equipped with two horizontal heads suitable to carry out cutting & forming on 4, 6, 8 sides on rope chain, mixed ball & long cylinder chain, round or with geometrical shape chains in general. The machine is fitted out with two very high precision spindles, two adjustable 4-tools cutter (120 mm diameter), two vice units in flat position and N. 1 dragging chain winder to facilitate the cutting of long elements. Complete with vacuum unit, electric plant, two optical scopes for chain set-up, base, service spanners & spare belts. CE 98/37 certification. 230-400V / 50-60Hz / 3 phase Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152182-new-ompar-ra-3200-two-heads-diamond-cutting-machine-for-chains-with-geometrical-sections100 x 90x 176(h) cm370 Kg250 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e04a1f45168e6da84b711e39922d329/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c716f6f68bae8cd941b754b223d51084/original-4.jpg2024-09-25 15:40:48 UTC6152183850.0iandesin Type Universal Chain Hammering Die Model 16 15 220V/3phase/60Hz #n/aChain Making/ManufacturingChain Hammering Machinesused0117-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152183-used-0117-120-giandesin-type-universal-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e23a8801cbd126406df3e6228d1945ef/original-0117.jpg2024-09-25 15:40:47 UTC6152184220-380V/50-60hz NEW 1985 Electronic controls/Variable speed Note: Presently set up to twist small Venetian (Box) Chain Photo below shows before and after twisting Additional Photos:Chain Making/ManufacturingChain Equipment / Secondary Operationused7051-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152184-used-7051-105-ciemmeo-giacetti-chain-and-wire-twisting-machine29" W x 15" D x 52" H36" x 24" x 60" H215 Lbs.315 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e2306db8974c7c2bd548466a44a0e36/original-7051.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d408efe4e9a79bb3434dcef8e5807715/original-7051-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f720374f308deb629bba5c7106e13d57/original-7051-2.jpg2024-09-25 15:40:45 UTC6152185NEW GOLDPRO® Lobster Clasp Production Line Listed price subject to manufacturer’s price increases without notice. Availability: Ex-Factory, ChinaChain Making/ManufacturingChain Making MachinesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152185-new-goldpro-lobster-clasp-production-line-2021COMMODITY & DESCRIPTION UNIT PRICECNC Multi-Function Production Making Machine – 100THydraulic Power with :-22 KW Servo Motor 10.4″Touch Screen NC Output Magnetic Gate Feet NC Output Press Sensor 114,925.00Complete tooling set for 124N 3,700.00Automatic Lobster Spring Catch Shell & Welding ( Step-sheared plate)7” Touch ScreenRemote Food Switch Control 59,100.00Pulsed Laser Generator 400V Connection Cable、Optical fiber 400Microns、Full weld/cut focusing scope 42,400.00Modifications for Gas Flame Equipment 5,950.00MCU Pulse plasma welding system with Argon Protection、connection cable、sensor’s 11,375.00Automatic Welding tungsten needle compensation of NC device ( data can be adjusted) – linkage using with controller 8,150.00Semi-Auto Spring Manufacture & Insertion 25,600.00Fully Automatic Spring Manufacture and Insertion Machine :- 7” Touch Screen :- Reel Clutch Group with sensor :- PLC Control 36,200.00Semi-Auto Lobster Clasp Assembly Machine :- 7” Touch Screen :- PLC Control :- Remote Foot Switch 10,725.00Fully Automatic Lobster Clasp Assembly with two Vibrator Controller & CNC Robotic Arm、PLC Controller 、7″ Touch Screen、Sensor’s 48,840.00Fully Automatic Spring Manufacture & Insertion & Lobster Spring Catch Shell Assembly with Trigger :-  10” Touch Screen :-  Digital Vibrator equipment x 2 set. :-  Digital Level Vibrator equipment x 2 set :-  Lighting :-  Complete Sensor Protection :-  Digital Lower Pressure Control :-  Complete set tooling ( one size ) 166,750.00Complete Digital Vibrator’s tooling set for 125ND-f Complete Digital Level Vibrator tooling set for 125ND-g 24,300.00Complete set tooling for 125ND 14,000.00Fully Automatic Product Inspection Machine with:- :- Digital Level Vibrator tooling :- Digital Level Vibrator tooling :- Complete Sensor Protection :- PLC Controller :- 7” Touch Screen 34,650.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d39ee91b797bc6312e28a2dbf6fffb3f/original-0_35g-Lobster-clasp-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d058518171f2ed9ace3b4b1f8fff79a9/original-0_50g-Lobster-clasp-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c909c118052d59bf37f002f492fac709/original-0_52g-Lobster-clasp-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5dde00aab4b47f7d4cf4fa327765450/original-122ND-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2d6ba01dbc4fcc6957b40e4e7776042/original-122ND-B.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32c1336135ce77fc5d43be7b8421cfa9/original-123NA-M-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4197dce102526befd83a352d419ddc6f/original-123NA-M-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb36dde526b123c7d8ea078f08a85edc/original-123NA-M-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/daa06637d86b835e428e38bdfe60feab/original-123NA-M-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/001724cd7467afcb4d36280953a285d8/original-123NA-M-A.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee5623cf853c3c527534a87a0cecd219/original-123ND.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c20cabbb49669f20f784b8d9ee6a01a/original-123ND-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74469b837ddd040fedb18cd9e6565510/original-123ND-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f60cc9ac90045c02334adf13d04e298/original-124N.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1c1bd8be5033829f765d04829685509/original-124N2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4527cf6ff161591466797a73ed7a9496/original-124NA-M.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c340b3843912a2a7bfdf17526a2e2437/original-124NA-M-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c9c52b616f37d2b416cd2ac690a36fc/original-124NA-M-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b167fe064c2817c89f0d643df2a09dbb/original-124NA-M-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/187341d79c68dcb5c12827342994c841/original-124NA-M-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc5ee420ab52b8fa31fd5563d6becb77/original-124NA-M-A.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8acfb7071e310d2c3122ff2fa472ba0c/original-Lobster-Clasp-Mold.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b99f5fa1f5e1ea391755c9ad1f2db2f/original-Lobster-Clasp-production-line-Q-A-1024x604.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4366f91c1139c1a14b1fd298a4c1988/original-lobsterclasp002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c08d58b98e792027d2b5e06948bb006f/original-Spring-Insertion-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f986bf335c794fa790da8f21573eb7f2/original-0_35g-Lobster-clasp-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8d3067d8d806d34929cd1adcbbe3fb9/original-0_35g-Lobster-clasp-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f8945e36c82b1467e39f9308e2c9937/original-0_50g-Lobster-clasp-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/460d0f53ee72a6c5c733b317e6d71ff2/original-0_52g-Lobster-clasp-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee4b3a2ac938a8575ece707aa1ce320d/original-Lobster-Clasp-production-line-Q-A-1024x604.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8398e16d1ba196237e2e31310ee36455/original-0_35g-Lobster-clasp-1.jpg2024-09-25 15:40:55 UTC6152187Model T1 16 10Chain Making/ManufacturingChain Hammering Machinesused5024-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152187-used-5024-120-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3087ff55ce885a5649cf0364a5e14260/original-5024.jpg2024-09-25 15:40:47 UTC6152188950.0Giandesin Type Large Universal Chain Hammering DieComplete w/ inserts .130wideChain Making/ManufacturingChain Hammering Machinesused5184-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152188-used-5184-120-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23cc46c111a9f01f8ec5f0eb410e37fb/original-5184.jpg2024-09-25 15:40:47 UTC6152189RA/2000 ICE-V Equipped with two vertical heads and two icing discs for chain fixing. Suitable for continuous lapping on chains with max wire 1,30 mm. Machine is complete with refrigerating unit, suction plant, bench, lapping cutters, service spanners and spare belts, CE 98/37 certification. RA/2000 ICE-H Equipped with two horizontal heads with icing discs for chain fixing. Suitable for continuous chains shaping with max wire 1,30 mm. Machine is complete with refrigerating unit, suction plant, bench, 4-tools cutters, service spanners and spare belts. CE 98/37 certification. 230-400V / 50-60Hz / 3 phase Sample Photos Dryer – Bevel Availability: Ex-Factory, Italy Price:RA/2000 ICE-V: € POR Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152189-new-ompar-ra-2000-ice-patended-ice-diamond-cutting-machine-for-chains150 x 145 x 215(h) cm1350 Kg1170 Kg€ 750,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5738aa736a77ae0c276bdeea90962bb5/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c8a1971c883a0616699851e9217dec7/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d857722a08cbf3b2a3e7d6894a9b42da/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abf203116e0f0d8311be6d53e3155ad8/original-2.gif2024-09-25 15:40:51 UTC6152190Automatic-control device for feeding plated wire used in the production of hollow chain.. Adaptable to any type of machine. It recognizes and guides differences in colour and gloss when feeding two different metals. Technical Data: Accessories: reel-holder instead of the skin-holder cone... € 525,00 stainlees steel or alluminium reel...€ 245,00 Includes skein holding cone Availability: Ex-Factory, Italy Price: € 3.505,00 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Equipment / Secondary OperationnewGF05Pawtucket, RIhttps://www.goldmachinery.com/listings/6152190-new-goldpro-large-hollow-seam-sensor-device-gf05from 1.5mm to 2,50mm5 Meters per minute (maximum)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eced2984b6890645c11c11aa4c83dcb3/original-GF05.jpg2024-09-25 15:40:45 UTC6152191Machine voltage 220 3ph 50/60 Headstock with double bore Crank handle and lever on head 5 position stop Width 1270mm depth 530 mm Height 1530mm Equipped With: CNC Power Ring indeder Haas CNC Control voltage 110v 1ph 50/60 Dual Diamond cutting tool Diamond cutting toolsChain Making/ManufacturingDiamond Faceting Chainused5995-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152191-used-5995-110-ompar-shore-diamond-faceting-machine-for-decorating-rings-with-cnc-ring-indexer-haas-controlhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebf1ca937dc3a077ef6681aa80809235/original-IMG_5717-e1658410207613.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b28465caf219cea95952be4d4a3354a4/original-IMG_5723-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7487d25ddaa4ccbb4d59c231063c6bac/original-IMG_5717-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4e2a572a1ddcf4b70e05dc1931ab1a1/original-IMG_5718-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1aaa828bf022085d47f7f409225ba5fe/original-IMG_5719-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/501a077a361bbd21d62c7459e2169768/original-IMG_5720-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d228d422e96976185a2fbdf05efec4d/original-IMG_5721-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b31753de643e33f161ec42832b4db1f/original-IMG_5722-768x1024.jpg2024-09-25 15:40:50 UTC6152192The lowest cost production of DIY luxury Chain suite, you only need simple equipment, NDII will manufacture any fully automated molds for your design, use the Semi-Auto Ring Making & Assembly with Soldering equipment can be manufactured by the ever-changing light and very beautiful Chain …….. High-precision automatic punching machines available in: 3 Tons 5 Tons 10 Tons Technical Data: 80 – 120 R.P.M 220V 50Hz AC Motor MCU Controller Prices: 3 Tons Punch TWN M/C $8,963.49 5 Tons Punch TWN M/C $13,404.17 10 Tons Punch TWN M/C POR Accessories: Mold complete ( S/M ) $1,524.97 – $2,065.07 Safety grating device $444.80 SMC Pneumatic system $508.34 Protection Sensor device $603.66 Pneumatic feeders (ITY) $787.944 Pneumatic feeders (TWN) $454.339 Availability: Ex-Factory Price: See AboveCheck the latest exchange rate Listed price subject to manufacturers price increases without notice.Chain Making/ManufacturingChain Making MachinesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152192-new-goldpro-semi-automatic-stamping-chain-making-machine-for-hand-made-chains-by-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5097a2e7ade400aeb7ca9ca3ed34cb0c/original-PUNCH-MACHINE-AND-MOLD-OFFER-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/488581743e193310bf285a66f1276f09/original-punch001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b7da10a743e22bf40c12cefdab697ae/original-punch003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd2ffb065f2e913232de5503cca34dc9/original-punch004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ea770276b7edf45df511e5713a2d338/original-punch002.jpg2024-09-25 15:40:40 UTC6152193Production Image: Pure Gold 999.9 Thickness :0.25mm Width: 50mm Pure Gold 999.9 22mm Round Luxury jewelry set Also available: New GoldPro® Automatic Stamping Machine Press 16 & 20 Tons Listed price subject to manufacturer’s price increases without notice. Available Ex-Factory, ChinaChain Making/ManufacturingBeads and Ballsnew111-AMDPawtucket, RIhttps://www.goldmachinery.com/listings/6152193-new-goldpro-automatic-hollow-design-patterns-manufacturing-mould-diehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c023cf42417380cac4ddab80b733234/original-11156.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/539fb98896c30d577caad8c879687e7d/original-n11.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccac71d3a3843bcf4fdf2da9ef51bee4/original-n2.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bdb3e6f680f1107a47fb59849eec23c/original-n3.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0676bd9c70dab5212ca4c926f66d3361/original-goldprostamping.png2024-09-25 15:40:46 UTC6152194Equipped with two horizontal heads suitable to carry out shaping and lapping on medium/heavy, alternated and long links chains. The machine is fitted out with two sturdy structures, two horizontal heads, two dragging chain winders positionable in accordance with chain direction, two universal discs units 350 mm. diameter. The machine is complete with base, vacuum unit, 4–tool-holders, optical layers, service spanners and spare belts, CE 98/37 certification. 230-400V / 50-60Hz / 1-3 phase Sample Photos Bevel – Accessories Availability: Ex-Factory, ItalyChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152194-new-ompar-ra-2300-twin-two-heads-diamond-cutting-machine-for-chains215 x 115 x 210(h) cm1450 Kg1200 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c320d445a5efa880a7f2ddb7dee11967/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbdc3fd0be81458ea4483c7620c21e82/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ecf7de7814e21ecab1773a835915573/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d620968abb88f6806129344ed4292326/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b2ffc61f968ea7ed53c5e5e139901a6/original-2.jpg2024-09-25 15:40:50 UTC6152195Equipped with two horizontal heads suitable to carry out cutting and forming on 4, 6, 8 sides on rope chains, ball-chain and hammered with geometrical shape chains; concave and convex bevelling and forming on chain with maximum wire 2,0 mm. The machine is fitted out with two very high precision spindles, two adjustable 4-tools cutters (120 mm diameter), with vacuum system for gold chips recovery, vice-discs (120 mm diameter) mounted on carriage with double adjustment, both for centering and cut depth with reading on centesimal gauges. Complete with steel disc holder flanges, vacuum unit, electric plant, two optical scopes for chain set-up, base, service spanners & spare belts. CE 98/37 certification. 230-400V / 50-60Hz / 3 phase Sample Photo – Accessories Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152195-new-ompar-ra-2300-b2-two-heads-diamond-cutting-machine-for-chains-with-geometrical-sections130 x 95 x 190(h) cm490 Kg310 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/731d7c698499bfbefe2ee281c60ffbf8/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dc648af9fa182b704682e2a2c3a3e3a/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9ec08f5cd0d13f2435d820a1c8a3002/original-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d9a98eeb2c2b94d85981b708273dca4/original-2.gifhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ed32ee112d67d02f2fc5a5eecb99c36/original-3.gifhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bd112818a18b7d8e9b442f4c91b9284/original-4.gif2024-09-25 15:40:49 UTC6152196Equipped with one horizontal head and universal discs (350 mm diameter) suitable for shaping and lapping on long links chains with wire over 1,00 mm. The machine is equipped with a device for lateral rotation of the head. It is complete with base, optical layer, 4 adjustable diamond tool holder, service spanners and spare belts, CE 98/37 certification. Sample Photos Accessories – Bevel Availability: Ex-Factory, ItalyChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152196-new-ompar-ra-2300c-diamond-cutting-machine-for-chainshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b45f3106893b8f83b06f7562f0f850e/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c8952fa469c572d5fdcfb48e744e71c/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03a32b165ec2941ffbb12ea1a30e9887/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e38674be511b97684dae831a6542912/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9faa4029aed0abd5245d4398793bd541/original-2.jpg2024-09-25 15:40:50 UTC615219785990.0Diamond cutting machine model RA/FANTASY with two vertical heads at synchronised cyclic movements prearranged for discs Ø 150 mm. The machine is suitable for carrying out various diamond cutting such as lapping, chamfers, satin-finishing, beats, stars, generally geometrical drawings and ornaments. The spindles are driven by motors with frequency inverter to change the revolutions from 0 to 22.000 r.p.m.and are connected to motors with adjustable cam to get diamond cutting with vibration. The machine is complete with bench, service spanners and spare belts, CE 2006/42 certification vibration. Power supply 230V 50/60Hz. 1-phase Eur 56.400,00 EQUIPMENT N. 2 Flattening (lapping) cutter (Eur 350,00 each one) Eur 700,00 N. 2 Pincer-holder c/w pincer Ø 6,00 (Eur 630,00 each one) Eur 1.260,00 N. 2 Horizontal heads c/w 1-tool cutter (Eur 1.800,00 each one) Eur 3.600,00 N. 2 3-tools cutter for horizontal head (Eur 390,00 each one) Eur 780,00 N. 2 Heads for stars c/w N.1 tool (specify how many tips) (Eur 2.900,00 each one) Eur 5.800,00 N. 1 Twin spindle head Eur 3.300,00 N. 1 Set of discs Eur 430,00 N. 1 Unit (right+left) flat position guide Eur 4.500,00 N. 1 Set of jigs for cutting in flat position Eur 450,00 N. 1 Dragging chain winder Eur 3.450,00 N. 1 Centering jig/3-diamond tools holder c/w optical layer Eur 2.150,00 N. 1 Pin for centering jig (n.1 for each chain size)Eur 60,00 DIAMOND TOOLS N. 1 Set (2 pcs.) lapping diamond tools 3,0 mm Eur 460,00 N. 1 Set (2 pcs.) lapping diamond tools 4,0 mm Eur 580,00 N. 1 Set (2 pcs.) lapping diamond tools 5,0 mm Eur 750,00 N. 1 Set (2 pcs.: 1 right+1 left) lapping diamond tools for bevelling 30°/45° Eur 480,00 N. 1 Set (2 pcs.) eccentric diamond tools (Radius to be specified) Eur 380,00 N. 1 Diamond tool for stars Eur 230,00 N. 1 Diamond tool 150°/3,0 mm Eur 230,00 Sample Photos 1 – Sample Photos 2 Machine Closeup 1 – Close Up 2 – Jig Cutter Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152197-new-ompar-ra-fantasy-universal-diamond-cutting-machine-for-chain-decorationshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9ee1492cb81fcc62fcf1807a2c2f675/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ce0179a3ea9238b55af87a972bbd882/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b96485f9f7330656d95a652d0134da5/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf549f11cb3a061fc6570532fa2ccbea/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b85e53102d00cb39a9dcf6438560d67/original-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47e53ee3b13e1d990f640721d569b72d/original-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4c6b96462d0a2f3781722227ee40f0d/original-2.jpg2024-09-25 15:40:52 UTC6152198220V/3PH/60HZ S/N 96859 Single headed circumferential swiss cut machine Model T2B Equipped With: Hand operated work table with left/right motion Factory steel cabinet stand Original owners manual Offered As-is less scope and cutting attachmentChain Making/ManufacturingDiamond Faceting Chainused6757-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152198-used-6757-110-tousdiamants-type-t2b-diamond-faceting-cutting-machine-jewelry850 lbs.40" x 32" x 57"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ede94757ac4b84187d83d87ddad1b9c/original-IMG_5557-e1657294811716.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c94ec287f3d05ca02cd3da4d370d71b/original-IMG_5562-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0989b6c0eb619af23c010071f9e543c5/original-IMG_5557-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ad7d8cd8d38bd33ad4128708818f920/original-IMG_5558-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a492d146b47bd079d44809ca0e95ac52/original-IMG_5559-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8590257acaf0d307701ef1d80fa63175/original-IMG_5560-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8ac5f3ff482ba25605c07786a370834/original-IMG_5561-768x1024.jpg2024-09-25 15:40:51 UTC6152199Special diamond cutting chain ice lathe, complete with: Refrigeration Unit Double Chamber Cylinder Protection Hood CE Certification Fast Cooling Available Ex-Factory, Italy Pricing Upon Request, Please InquireChain Making/ManufacturingIce Diamond Lathesnew776250Pawtucket, RIhttps://www.goldmachinery.com/listings/6152199-new-goldpro-fioa-electronic-ice-diamond-cutting-lathe320mm by 700mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/843e70611b3007c801df03ca95bc5d22/original-776250-e1507724176705.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0233fb99467d141a5d34b6c7ae68365/original-776250-e1507724176705.jpg2024-09-25 15:40:51 UTC6152200Chain Making/ManufacturingIce Diamond Lathesused5849-160Pawtucket, RIhttps://www.goldmachinery.com/listings/6152200-used-5849-160-used-roll-for-ice-diamond-cutting-lathesmooth27.5" long x 9" diameterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5fe6f08b3c1110385ed17d4cbcbf7b0/original-5847_1.jpg2024-09-25 15:40:51 UTC6152201Scroll Down To See Video! Production Image : Pure Gold 999.9 16mm Round Pure Gold 999.9 22mm Round Luxury jewelry set Also available: New GoldPro® Automatic Stamping Press 16 & 20 Tons Or you may use your own Press Specifications of Press Needed: Listed price subject to manufacturer’s price increases without notice. Available Ex-Factory, ChinaChain Making/ManufacturingBeads and Ballsnew111-AMDPawtucket, RIhttps://www.goldmachinery.com/listings/6152201-new-goldpro-fully-automatic-hollow-ball-manufacturing-mould-diehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c023cf42417380cac4ddab80b733234/original-11156.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf1ce7af2df49314c5dc58a73ca6ab35/original-m11.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b30e3d6c13ac5b831f49e41bdf57c459/original-m2.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b6b76ca95939e9a43b76a17af66d29b/original-m3.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8688c517cae4a2bd34f3a6c3ebd5ade3/original-1112.png2024-09-25 15:40:47 UTC6152202THE LATHE IS COMPLETE WITH: - ELECTRONIC AUTOMATION. - DOUBLE CHAMBER CYLINDER Ø320x700 mm. - ADJUSTABLE SPINDLE SPEED WITH POTENTIOMETER FROM 0 TO 600 rpm. - SPEED OF SPINDLE: 0 ÷ 600 RPM - MANDREL SPEED CONTROLLED BY PEDAL KEYBOARD: RPM 0 ÷ 150 - BLOCKING DEVICE IN CASE OF BREAKING CHAIN. - ADVANCING OF THE HEAD BY MEANS OF POTENTIOMETER - WORKING HEIGHT: 200 mm. - DISTANCE BETWEEN THE TAILSTOCKS: 1000 mm. - CYLINDER DIAMETER: 320 mm. - MOTOR POWER: 4/6 + 1 HP - OVERALL DIMENSIONS: 2250x1050x1350h mm. Approx. - WEIGHT: 1400 ÷ 1500 KG. Approx.Chain Making/ManufacturingIce Diamond Lathesnew776255Pawtucket, RIhttps://www.goldmachinery.com/listings/6152202-new-goldpro-fioa-mechanical-ice-diamond-cutting-lathe200mm1000mm320mm260mm52mm636/1600100mm5.5 HP1400 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c32f985a04116a548f7bbcbb8de09a44/original-776255.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a2fab7f2ab0e5aafa58938ae9bcc524/original-20171013_100341_resized.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6a1819c4adb6598ef24abcb32aded9c/original-20171013_100404_resized.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3684a681a372dcf4e74468e04fd120c6/original-20171013_100406_resized.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72e85c342ab3509f20a3950c36307124/original-20171013_100328_resized.jpg2025-05-01 13:13:29 UTC6152203Availability: Ex-Factory, China Price:: $36,080.00 Complete with 1 set of toolingChain Making/ManufacturingChain Making MachinesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152203-new-goldpro-2020-snake-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d31ad1b41a91fa1c9e5147572a53db47/original-chain_new.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cdbcd6690855fba0e4d42c489f20d27/original-NDII-SNAKE-CHAIN-MACHINE-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9db878637351dfc4ee3344633b57d29/original-NDII-SNAKE-CHAIN-MACHINE-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfc586f5eec605e3c4b230518576d7cc/original-NDII-SNAKE-CHAIN-MACHINE-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8da3914a24013341e673c30c0c91d541/original-NDII-SNAKE-CHAIN-MACHINE-5.jpg2024-09-25 15:40:40 UTC6152204220V/3PH/60HZ Equipped With: Diamond tool holder Tool setting microscope Revolving/Indexing diamond cutting tool for flat Hydraulic work table with left/right motion Factory steel cabinet stand Hydraulic motor & pump system Offered As-isChain Making/ManufacturingDiamond Faceting Chainused6753-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152204-used-6753-110-tousdiamants-model-t2e-swiss-diamond-faceting-cutting-machine-jewelry1250 lbs.56" x 25" x 65" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f8117c64e7d776a2ebe34f282c69e5f/original-IMG_5552-e1657295072467.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15f410ff0df2498b37e6b1e206808f01/original-IMG_5556-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84f969477ef938fbf1f65e00b337c6b7/original-IMG_5552-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31f3f7c24106a605cc0e0ce1e9b7c441/original-IMG_5553-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86c62fcb37e4f011594dff860cd878dc/original-IMG_5554-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ee5df6b473a9857d4b47ab26b183e37/original-IMG_5555-768x1024.jpg2024-09-25 15:40:50 UTC6152205(4)Giandesin Type Medium Universal Chain Hammering Dies.Chain Making/ManufacturingChain Hammering Machinesused1445-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152205-used-1445-120-4-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa31e9f76a9423e7dd5997a0075fdf17/original-1445.jpg2024-09-25 15:40:47 UTC6152206New Semi-Automatic machinery for the production of solid links & rings This machine winds and cuts in each revelation of the arbor,it feeds in a solid wire that that is cut off on each revolution generating a link or ring based on the arbor size. Technical Data: Weight 31Kg Size 37x44x35 Electric network 220 Volt - 50/60 HZ - WATT 250 Max thread diameter - 1.20 mm Max internal ring diameter - 10 mm Production N.12000 one spiral rings production per hour (max. speed) System functioning Cut by axial deplacement by knife Available With a variety Of Tooling Sizes To Produce Different Diameters of Solid Links /Rings. Accessories: AUTOMATIC MACHINE WITH MANUAL DRIVE FOR THE PRODUCTION OF VARIFORM RINGS - COD. 15, price: €2.440,00 Availability: Ex-Factory, Italy Price: € 5.250,00Check the latest exchange rateChain Making/ManufacturingLink MachinesnewAMMF-CPawtucket, RIhttps://www.goldmachinery.com/listings/6152206-new-goldpro-cmc-model-ammf-c-semi-automatic-ring-link-making-machine-for-the-production-of-various-shapes-sizes€2.350,00€280,00€276,00€266,00€266,00€266,00€266,00€54,80€47,50€125,70€69,80€169,40€91,45€139,75€71,45€138,75€71,45€136,75€71,45€129,75https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2afff62318cab60ab850674d023c4bda/original-unnamed-7.jpg2024-09-25 15:40:55 UTC6152207415 Volts / 3 Phase / 50Hz (variable in both directions)Chain Making/ManufacturingLink Machinesused1159-105Pawtucket, RIhttps://www.goldmachinery.com/listings/6152207-used-1159-105-fioa-winding-winder-lathe-for-tube-and-wire-link-making100mm6mm0-200 RPM43"x26"x51" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97769483265e2f95f69544091ca47e6e/original-R-062-e1416919958287.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/850ccc4998bb20e03df39d73d1bfe824/original-R-0622-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abf80febaaa5e3cc0ebfb35dedaa3414/original-R-0631-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc0f8b22e0984b965748329e9ed23e3c/original-R-0641-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bf1690be13a35594fa06220aef24876/original-R-0651-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/955686b9380b955d4413acbecb6cd43a/original-R-0661-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cc97927e7604c2912155e66c2219774/original-R-0671-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92bf53c17d1b232def519eba16d0f72d/original-R-0681-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac51768624b487902a2882e8b8afcbd2/original-R-0691-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/974c8f753b5ec3796643549a5652fe14/original-R-0701-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/122fc454cac4ec23629b5fbc871c43cb/original-R-0711-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36d1770e52ecf957f90de090c5cce14c/original-R-0721-768x1024.jpg2024-09-25 15:41:01 UTC6152208110V/1PH/60HZ Equipped With: Wire feed and guide Steel standChain Making/ManufacturingLink Machinesused2464-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152208-used-2464-100-jump-ring-making-link-machine.020" wire  x .0.80" ring diameter3/4 HP38" x 25" x 63" high475 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19ba54e73d06c0c6f69e7ed79233228b/original-IMG_2609-e1503510000567.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8aa536e30c86b21dcb5a5ddfa146bb8d/original-IMG_2616.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44d0961261447ba564f2b3dc87fdffdd/original-IMG_26091-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d68befe2a8c15d3197c4def14c7ec497/original-IMG_2610-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9337f861223f6e593dceaad698d9f474/original-IMG_2612-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efc4d3a891793c1dbea5814032d2aabe/original-IMG_2613-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68604b4ce6358c39d392f40f592b5b9b/original-IMG_2614-767x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f56f225f96ef4e4869005fa7548f31b9/original-IMG_2615-767x1024.jpg2024-09-25 15:40:58 UTC6152209115V/1PH/60HZChain Making/ManufacturingLink Machinesused2365-130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152209-used-2365-130-crafford-model-d-bench-model-air-operated-link-o-matic-link-making-machineRound Link   .040" x .250"40" x 26" x 26" high100 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ec254e08eb17f86c7c23ab4bf438fee/original-0741-e1471622028608.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68f4c9cce80f7b44f58345a73f6c64c9/original-083-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15b381650203df1857973d0a1bcedf6d/original-084-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab20dd72cc7ce9f3a6a6cfcbe9ebe1ab/original-0742-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/515b0938ebbef1e7c3eac3e6491928a6/original-0751-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2aa333deafc3295fd05c8433a7d7b826/original-0761-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91e0209bb073a1489eb2fd7386003f17/original-080-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/797d7135e4987f8dd1302d7928be8b1e/original-081-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b58c7bc6488b883ce838482a189fdf41/original-082-768x1024.jpg2024-09-25 15:41:00 UTC6152210Giandesin Type Universal Die Model 2360 for Chain HammeringChain Making/ManufacturingChain Hammering Machinesused0951-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152210-used-0951-120-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e44169aa78e0cb5534cfaaa272774f71/original-0951.jpg2024-09-25 15:40:47 UTC6152211Equipped With: Foot pedal control Wire Pay Off Regulator, filter, lubricator systemChain Making/ManufacturingLink Machinesused7166-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152211-used-7166-140-crafford-model-d-air-operated-link-o-matic-machine-bench-model-s-n-m505c.060" x .297" x .375"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3238bdb7c2f7e11a915cb82c8437f7ae/original-7166.jpg2024-09-25 15:40:55 UTC6152212Foot pedal control Wire Pay Off Regulator, filter, lubricator systemChain Making/ManufacturingLink Machinesused7165-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152212-used-7165-140-crafford-model-d-air-operated-link-o-matic-machine-bench-model-s-n-m500cdhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01d2acf67b110a194eb2714812811026/original-7165.jpg2024-09-25 15:40:55 UTC6152213This machine has the ability to produce multi-shaped rings/links comonly used in the mfg of jewelry related items, it is equipped with bench mounting clamping device to make it portable and easily set up for production. Technical Data: Weight 9Kg Max thread diameter - 1.20 mm Max internal ring diameter - 10 mm System functioning Rent cutting system with eccentrics tested to avoid the usual wear and tear; rotary sleeve to allow the production of differently shaped(oval, rectangular, triangular)and differently measuring rings;minimum overall dimensions, it can be placed by the work Available With a variety Of Tooling Sizes To Produce Different Diameters & Shapes of Solid Links /Rings Tooling Prices Vary Based On Sizes Requested Availability: Ex-Factory, Italy Price: € 1.700,00Chain Making/ManufacturingLink MachinesnewA-MPawtucket, RIhttps://www.goldmachinery.com/listings/6152213-new-goldpro-cmc-model-a-m-semi-automatic-manually-operated-solid-wire-link-ring-macking-machine-for-production-of-various-shhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fa74b164b134c48849abc1d51ff74ab/original-30.jpg2024-09-25 15:40:55 UTC6152214220V/1PH/50HZ, New 1999 Used for cutting the following chain types: Curb, Double Curb, Cable, Hammered in Gold & Silver & Brass Equipped With: 1 - Set Discs 1 - Vertical SpindleChain Making/ManufacturingDiamond Faceting Chainused5850-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152214-used-5850-110-mca-model-dc002-diamond-faceting-cutting-machine-jewelry-chains1/3 HP18,000 RPM (variable)3-4-5-6 mm22" x 20" x 50" high374 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd5bf66653d8641f0cd5ee50c2eb115e/original-5850.jpg2024-09-25 15:40:48 UTC6152215Bench Model Hand Operated Used to Remove Helix from Links & Jump RingsChain Making/ManufacturingLink Machinesused1152Pawtucket, RIhttps://www.goldmachinery.com/listings/6152215-used-1152-new-tvn-model-arm-link-straightening-devicehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee86ab5f47a1ac82348a80dcb47b84a8/original-1152.jpg2024-09-25 15:40:56 UTC61522166888.0This machine is suitable for coiling the thread on pins of any profile and size to form links which can be joined together for making various models of chains. Chuck rotation adjustable through an handle from 0 to 1000 r.p.m. in both senses. -Foot-control start. Installed horsepower 1,1 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 980 mm Width 600 mm Height 1180 mm Approx. Weight 150 kg Optional: Equipment for flat wire spirals. Equipment for tube spirals from plate (without anchorate pin). Availability: Ex-Factory, ItalyChain Making/ManufacturingLink Machinesnewavr-oPawtucket, RIhttps://www.goldmachinery.com/listings/6152216-new-tvn-link-straightening-mod-avr-0-manual-winding-machine-with-motor-variatorhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6a76c00f10d4ac7c8f92d4bee98d1e0/original-avr-o.jpg2024-09-25 15:40:56 UTC6152217Set for Jump Rings, small d Ring, .022" Small D Ring, Bench Model, .120" wide by .100"Chain Making/ManufacturingLink Machinesused5662Pawtucket, RIhttps://www.goldmachinery.com/listings/6152217-used-5662-used-cable-link-making-machine-sethttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09d4aa372492bc0ceb5008968015f4e5/original-5662.jpg2024-09-25 15:40:56 UTC6152218Bench Model Less MotorChain Making/ManufacturingLink Machinesused8776Pawtucket, RIhttps://www.goldmachinery.com/listings/6152218-used-8776-used-s-w-link-making-machine20" x 14" x 17"Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2397cd6359bc0068a48f77c2469adf10/original-005-e1452083737636.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d834e2222e0994dbddbc9d2bcffb933/original-0059-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b9088973b1ca58fc59fb579f9927b86/original-0065-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1df97c6010811d13dfb22f15eb3b8a1d/original-0072-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71294a9ffb581b729827aca551740f0e/original-0084-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/387445865960440d3dc3b418362f15ec/original-0104-768x1024.jpg2024-09-25 15:40:59 UTC6152219Chain Making/ManufacturingLink Machinesused8608Pawtucket, RIhttps://www.goldmachinery.com/listings/6152219-used-8608-used-nickerson-type-cable-link-making-machine20" x 15" x 16"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ecaf03a918f64bc70bfb4270705c3af/original-8608.jpg2024-09-25 15:40:56 UTC6152220ART. A/V Price: €8.820,00 Plus Tooling “System” to Manufacture Hollow/Solid Hand-Made Rope Chain Figure 1 – Winding Machine Price: €1.386,00 Figure 2 -Solder Gun Price: €1.512,00 plus Tooling, Packing/Crating New Semi-Automatic machinery for the production of solid and hollow links & rings (Commonly Used For Hand Made Rope Chain Mfg), even for extra light rope chain, thanks to the possibility of loading a stripe of precious metal together with an iron wire core or similar. This machine winds and cuts in each revelation of the arbor,it feeds in a solid wire that is simultaneously wrapped by a thin strip of flat metal forming the hollow ring afterwards the core is to be dissolved/removed. Available With a variety Of Tooling Sizes To Produce Different Diameters of Solid Or Hollow Links (See list of accessories below). Technical Data: Weight 100Kg Size 100x75x44 Electric network 220 Volt – 50/60 HZ – WATT 500 Max thread diameter -1.50 mm Max internal ring diameter -15 mm Cut tecnology device Rent cutting system with knife holder spindle Production N.21000 rings production per hour (maximum speed) System functioning Opportunity to construct rings (round, oval rectangular, triangular and so on by positioning the rent in different positions); flattening of the rings by twin cylinders (roller) with maximum adjustment;equipment for the construction of hollow rings Accessories: Solder Gun for Soldering Hand Made Rope Links – COD. 13, price: €1.512,00 (Figure 1) Availability: Ex-Factory, Italy Check the latest exchange rateChain Making/ManufacturingLink MachinesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152220-new-goldpro-cmc-model-a-v-hand-made-rope-link-making-machine€11.718,00€1.386,00 (Figure 2)€150,00€180,00€189,00€189,00€189,00€189,00€37,80€31,50€80,70€49,80€92,40€51,45€99,75€51,45€99,75€51,45€99,75€51,45€99,75https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b30ad0022e427428a905c47bd0545125/original-31.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c22fd44811fa0c47a26b73ff936395c/original-ARTRC.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d92f85eed983de2e6cbcde80647b538/original-ARTMKC.jpg2024-09-25 15:40:55 UTC6152221Chain Making/ManufacturingLink Machinesused8301-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152221-used-8301-100-jump-ring-making-machine.015, Bench Model, Less Motor, Set Up for Jump Ringshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af95c1d3b95ad83065d3db68b64b918e/original-8301.jpg2024-09-25 15:40:56 UTC6152222Durston Tools is the market leader in precision rolling mills and no wonder; the DRM W130 Powered Rolling Mill is constructed from cast iron for optimal strength and rigidity. The W130 is a powered grooved rolling mill for wire rolling; side extensions also enable half round milling. The 1.1KW motor is powerful enough for continuous operation which is why Durston Tools’ mills have such a long working life. This versatile package has variable speeds from 5 to 20 RPM and a highly efficient, near-silent operation. The rolls are especially induction hardened to 64 RC; the main barrel has 19 square grooves for wire rolling from 10mm – 1mm. Side extension rollers provide a total of four half-rounds of 4, 3, 2 and 1.5mm. Safety features include an emergency stop button, safety bars at the front and rear of the mill, guards covering the extension rollers as well as guards covering the top gear. Part of Durston Tools’ award-winning range of products available since 1961. Technical Details: Available Ex-Factory, UK Priced for: $4,450.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewDRM-W130ssPawtucket, RIhttps://www.goldmachinery.com/listings/6152222-new-goldpro-durston-drm-wire-130mm-powered-rolling-mill150 kg130KG500390540116Wire651304, 3, 2, 1.5mm8mm110V, 220VDRM Poweredhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4008d69281a72abd5aa3ac1c13872d1a/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-2-e1571946454807-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/611efefd576806d070599589d4d5acc0/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/508e8a4335cebd41ccfe43600953a5e4/original-Durstons-DRM-130-SSP-Powered-Rolling-Mill-pic1-1075-1076-1077-510x579-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5a94947573becca0b3803d3ec8094d9/original-Durstons-W130-x-60-no-ext-mills-510x612-3.jpg2024-09-25 15:40:58 UTC6152223Durston Tools is the market leader in precision rolling mills and no wonder; the DRM F130 Powered Rolling Mill is constructed from cast iron for optimal strength and rigidity. The F130 is a powered flat roll mill for rolling sheet metal; side extensions also enable half round milling. The 1.1KW 110-volt motor is powerful enough for continuous operation which is why Durston Tools’ mills have such a long working life. This versatile package has variable speeds from 5 to 20 RPM and a highly efficient near silent operation. The rolls are especially induction hardened to 64 RC; the main barrel to a depth of 6mm, ensuring your rolls last a lifetime. The rolls themselves are flat-rolled providing maximum capacity for flat metal sheet rolling. Side extension rollers offer a total of four half-rounds of 4, 3, 2 and 1.5mm. Safety features include an emergency stop button, safety bars at the front and rear of the mill, guards covering the extension rollers as well as guards covering the top gear. Part of Durston Tools’ award-winning range of products available since 1961. Technical Details: Available Ex-Factory Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewDRM-F130ssPawtucket, RIhttps://www.goldmachinery.com/listings/6152223-new-goldpro-durston-drm-flat-130mm-powered-rolling-mill150 kg130KG5003905406Flat651304, 3, 2, 1.5mm110V, 220VDRM Poweredhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bb4184e16991fab0b025e8b011f1077/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-4-e1571946650799.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa41ef42093f8fc26abba5a787a24fa1/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8677f7a15f9abdad7b1a78aaae90eee9/original-Durstons-DRM-130-SSP-Powered-Rolling-Mill-pic1-1075-1076-1077-510x579-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b74a14772d5fc28eb655671ea7947195/original-Durstons-F130-E-x-60-rolls-1023-510x612.jpg2025-02-11 19:06:55 UTC6152224Scroll Down To See Video! Durston Tools is the market leader in precision rolling mills and no wonder, the new DRM SS 130 is the space saving version of the world famous DRM130 single-sided power mill. It offers the same specification with a much smaller footprint, perfect for when space is at a premium. The base measures just 45cm by 25cm and weigh in at just 106kg. The mill is formed from cast iron for optimal strength and rigidity and the 1.1 kW engine is powerful enough for continuous operatio,n which is why does Durston Tools’ mills have such a long working life. This versatile package has variable speed with forward and reverse and near silent operation. The rolls are especially induction hardened to 64 RC and the main barrels to a depth of 6mm ensuring your rolls last a lifetime. One side of extension rollers provide half rounds & safety features include an emergency stop button, safety bars at the front and rear of the mill, guards covering extension rollers as well as another guard covering the top gears. The DRM SS 130 Single Sided Power Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, UK Priced for: $3,575.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewDRM-SS130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152224-new-goldpro-durston-drm-130mm-combination-powered-rolling-mill-compact-size130 kg116Combination651302 & 1.5mm, 3, 48mm110V, 220VDRM Poweredhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ed445d799e1b17a61628877f1b48b0c/original-Durstons-DRM-SS-130-Single-Sided-Powered-Rolling-Mills-pic1-1095-1096-min-510x612-e157194683.jpg2024-09-25 15:40:56 UTC6152225Scroll Down To See Video! Durston Tools’ TUI Powered Rolling Mill range creates the same quality and output you expect from Durston Tools but at a lower cost. Where it matters the same components are used from the Core DRM range, such as the actual mills, rolls and casting gears. The cost savings are made by replacing the steel gearbox with an aluminium one, replacing the cast iron plate and main guard with steel instead and by having one central emergency stop button. As with all Durston Tools powered mills, the TUI F130 has variable speeds, as standard, in forward and reverse plus two sets of extension rollers securely stored behind black guards. The rolls themselves are 130mm flat rolls for sheet rolling to 6mm to create a perfect finish every time. The 1.1KW motor provides consistent power through the lifetime of the mill. Digitally controlled variable speeds from 5 to 20 RPM means you have complete control over each roll and the side extensions provide for half rounds of 4, 3, 2, 1.5 mm for additional versatility. The same standards of production and manufacturing are applied to the TUI range as you have come to expect from Durston Tools’ range. Technical Details: Available Ex-Factory Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewTUI-F130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152225-new-goldpro-durston-tui-flat-130mm-powered-rolling-mill130 kg110KG5003905406Flat651302 & 1.5mm, 3, 4110V, 220VTUIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb03a8362184294e8746bfca187de9a7/original-1092-TUI-mill-2-510x612-e1571946061923.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82ea90120a86da124e3390b1aac4cd5b/original-1092-TUI-mill-2-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f75cc3a3ef39d704d042368b84631b90/original-1092-TUI-mill-3-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5790334cbaabd50f07744028fed4ece9/original-TUIC130SSP_1091-510x503-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a397316f4458983b214015c41d5eacd/original-Durstons-F130-x-60-Rolls-1026-510x612.jpg2025-02-11 19:07:11 UTC6152226Scroll Down To See Video! Durston Tools’ TUI Powered Rolling Mill range creates the same quality and output you expect from Durston Tools but at a lower cost. Where it matters the same components are used from the Core DRM range, such as the actual mills, rolls and casting gears. The cost savings are made by replacing the steel gearbox with an aluminium one, replacing the cast iron plate and main guard with steel instead and by having one central emergency stop button. As with all Durston Tools powered mills, the TUI W130 has variable speeds, as standard, in forward and reverse plus two sets of extension rollers securely stored behind black guards. The rolls themselves have dedicated wire rolling mills including 19 square wire grooves from 10mm to 1 mm to create a perfect finish every time. The 1.1KW motor provides consistent power through the lifetime of the mill. Digitally controlled variable speeds from 5 to 20 RPM means you have complete control over each roll and the side extensions provide for half rounds of 4, 3, 2, 1.5 mm for additional versatility. The same standards of production and manufacturing are applied to the TUI range as you have come to expect from Durston Tools’ range. Technical Details: Available Ex-Factory, UK Priced for: $3,405.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewTUI-W130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152226-new-goldpro-durston-tui-wire-130mm-powered-rolling-mill130 kg110KG500390540196Wire651302 & 1.5mm, 3, 410mm110V, 220VTUIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bdc04d9196357cf52e81230849b45dd/original-TUIw130-Single-sided-power-1093-front-view-min-510x646-e1571945879513.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e35d6e352fa3c3ae8fad2ec010b555d/original-TUIw130-Single-sided-power-1093-front-view-min-510x646-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb55aabebae23b4d7007b71970d45040/original-TUIW130-Single-Sided-Power-1093-right-facing_1-min-510x646.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5809cf602d5fa8ad62aaee01586534b/original-TUIW130-Single-Sided-power-1093-close-up-rollers-min-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b10ccb9702380afe661bb1ed6ceeb8b9/original-TUI-W130-Single-sided-power-1093-left-facing-min-510x646.jpg2024-09-25 15:40:59 UTC6152227Durston is the market leader in precision rolling mills and no wonder; the FSM 160 Double-Sided Power Mill is constructed from cast iron for optimal strength and rigidity. The mill is available in two-speed configurations; fixed speed and variable speed. There is also a computer control panel which offers more information such as roll speed, pressure, oil indicator and light work. This mill is floor standing and offers automatic lubrication to the roller bearings, 160mm of flat roll area and 22 square grooves. The powerful 4 KW motor can provides continuous operation, which is why Durston mills have such a long working life. This versatile package has variable speeds with forward and reverse and a highly efficient, near silent operation. The heavy-duty cast iron gearbox means a smooth delivery of power to create a perfect finish every time. The rolls are specially induction hardened to 64 RC; the right barrel provides a large flat rolling service of 160mm on rollers with a diameter of 86mm to a maximum roll thickness of 25mm, ensuring your rolls last a lifetime. The right-hand barrels are dedicated to square wire forming and offers 22 grooves ranging from 9mm to 1mm. A set of extension rollers provide a total of four half-rounds; 4, 3, 2 and 1.5mm. Optional extras include digital roll gap metre and work lights. Technical Details: Available Ex-Factory, UK Priced for: $39,585.00 USD Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewFSM-160Pawtucket, RIhttps://www.goldmachinery.com/listings/6152227-new-goldpro-durston-floor-standing-160mm-double-sided-power-rolling-mill950 kg760KG125050014802225Combination861602 & 1.5mm, 3, 49mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f58ee643b67f1d382c0a13bd76d4397/original-Durstons-FSM-160-Power-Rolling-Mill-pic1-1082-510x612-e1571944328539.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b04c8e233b3743f75d7a4478df5356a/original-Durstons-FSM-160-Power-Rolling-Mill-pic1-1082-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ec310a3cd3504c004fb3ed1378304b7/original-Durstons-FSM-160-Power-Rolling-Mill-pic5-1082-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4928695542b79170f28b65ab8e77cbe/original-Durstons-FSM-160-Power-Rolling-Mill-pic21082-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcbb7219f7c41a026cf7614118bc743a/original-Durstons-FSM-160-Power-Rolling-Mill-pic7-1082-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17517b9fd8d6bce8cf447797b524cf8b/original-Durstons-FSM-160-Power-Rolling-Mill-pic6-1082-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c8a7cf1cdca5aa5ca243fb9f1c938ff/original-Durstons-FSM-160-Power-Rolling-Mill-pic4-1082-510x340.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b453c56ca4ba8c1fd501597f0d9f4dad/original-Durstons-FSM-160-Power-Rolling-Mill-pic3-1082-510x340.jpg2024-09-25 15:41:01 UTC6152228Chain Making/ManufacturingChain Hammering Machinesused0953-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152228-used-0953-120-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6250f8f15943095fe539bb8d8b6095e/original-0953.jpg2024-09-25 15:40:47 UTC6152230Scroll Down To See Video! Durston Tools is the market leader in precision rolling mills and no wonder; the DRM 130 Double-Sided Powered Rolling Mill is constructed from cast iron for optimal strength and rigidity. The 1.1 KW motor, is powerful enough for continuous operation which is why Durston Tools’ mills have such a long working life. This versatile package has variable speeds with forward and reverse, and a highly efficient near-silent operation. The rolls are specially induction hardened to 64 RC; the left barrel to a depth of 6mm, ensuring your flat rolls last a lifetime, and the right barrel offers 19 square grooves for wire forming from 10mm – 1mm. Two sets of extension rollers provide a total of seven half-rounds. Safety features include two emergency stop buttons, safety bars at the front and rear of the mill, guards covering the extension rollers at both ends as well as guards covering the top gears. The DRM 130 Double-Sided Powered Rolling Mill is part of Durston Tools’ award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $5,874.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewDRM130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152230-new-goldpro-durston-drm-130mm-double-sided-powered-rolling-mill200 kg180KG830390540196Combination65130& 1.5mm, 2, 3, 3mm and 4, 6, 810mm110V, 220VDRM Poweredhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e72f795fd4b3c65298a19a27768d7c6/original-Durstons-DRM-100-DSP-Powered-Rolling-Mill-pic1-1074-min-510x612-e1571945370594.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd33802d5509ec9306b07503da02a233/original-Durstons-DRM-100-DSP-Powered-Rolling-Mill-pic1-1074-min-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/810df8c3a9923593ffe890ebfa706602/original-Durstons-DRM-100-DSP-Powered-Rolling-Mill-pic1-1074-510x650.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0675b123a24f642504d06f1698b5adb8/original-Durstons-F130-x-60-no-ext-1026-1030-510x612-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bb1346b68ad9c1cd359df5c9624deb5/original-Durstons-W130-x-60-no-ext-mills-510x612-2.jpg2024-09-25 15:41:00 UTC6152231500.0Giandesin Type Universal Die for Chain Model T1 1615Chain Making/ManufacturingChain Hammering Machinesused5200-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152231-used-5200-120-giandesin-universal-hammering-stamping-die-jewelry-chain-makinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3eb86c77d5f7a61c46d12b2bd407991b/original-5200.jpg2024-09-25 15:40:47 UTC6152232850.0Giandesin Type Universal Hammering DieChain Making/ManufacturingChain Hammering Machinesused1705-120Pawtucket, RIhttps://www.goldmachinery.com/listings/6152232-used-1705-120-giandesin-type-universal-chain-hammering-press-stamping-die-jewelry-chain-making2-tonshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29daa6597c1882f1cfe870f3aaf21a90/original-1705.jpg2024-09-25 15:40:47 UTC6152233Durston is the market leader in precision rolling mills and no wonder; the FSM 200 Double-Sided Power Mill is constructed from cast iron for optimal strength and rigidity. The mill is available in two-speed configurations; fixed speed and variable speed. There is also a computer control panel which offers more information such as roll speed, pressure, oil indicator and light work. This mill is floor standing and offers automatic lubrication to roller bearings, 200mm of flat roll area and 24 square grooves. The powerful 5.5 KW motor can provides continuous operation, which is why Durston mills have such a long working life. This versatile package has variable speeds with forward and reverse and a highly efficient, near silent operation. The heavy-duty cast iron gearbox means a smooth delivery of power to create a perfect finish every time. The rolls are specially induction hardened to 64 RC; the right barrel provides a large flat rolling service of 200mm on rollers with a diameter of 110mm to a maximum roll thickness of 35mm, ensuring your rolls last a lifetime. The right-hand barrels are dedicated to square wire forming and offers 24 grooves ranging from 12mm to 1mm. A set of extension rollers provide a total of four half-rounds; 4, 3, 2 and 1.5mm. Optional extras include digital roll gap metre and work lights. Technical Details: Available Ex-Factory, UK Priced for: $72,345.00 USD Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewFSM-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152233-new-goldpro-durston-floor-standing-200mm-double-sided-power-rolling-mill1200 kg1050KG152055016002435Combination1102004, 3, 2, 1.5mm12mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7882c9c5352c541bd8b8419c191494c6/original-Durstons-FSM-200-pic1-1083-min-510x612-e1571944151953.jpg2024-09-25 15:40:59 UTC6152234Durston is the market leader in precision rolling mills and no wonder; the FSM 130 Double-Sided Powered Rolling Mill is constructed from cast iron for optimal strength and rigidity. This mill is a floor standing mill and has lubrication on the roll bearings. The 1.1 KW motor is sturdy enough for continuous operation, which is why Durston mills have such a long working life. This versatile package has variable speeds with forward and reverse and a highly efficient near silent operation. The rolls are specially induction hardened to 64 RC (the right barrel provides a large flat rolling service of 130mm on rollers with a diameter of 65mm, offering a maximum roll thickness of 6mm) ensuring your rolls last a lifetime. The right-hand barrels are dedicated to square wire forming and offer 19 grooves ranging from 7mm to 1mm. A set of extension rollers provide a total of four half-rounds; 4, 3, 2 and 1.5mm. Optional extras include digital roll gap meter and work lights. Technical Details: Available Ex-Factory, UK Priced for: $24,570.00 USD Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewFSM-130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152234-new-goldpro-durston-floor-standing-130mm-double-sided-power-rolling-mill490 kg390KG82545012101914Combination651302 & 1.5mm, 3, 47mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03f0972fa3ef14f4e07f481afeffc69b/original-Durstons-FSM-130-pic1-1080-510x612-e1571944657341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64a9d29a380b2c0cb492ab4ad0990e2a/original-Durstons-FSM-130-pic1-1080-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e1f352710d13309ff42f5c9a38e431e/original-fsm130-1-510x736.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/012d5f6b8f06b5dca5768cae59bc98a3/original-fsm130-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1749b0b2bd562b50bd5d498d82f874ae/original-fsm130-2-510x455.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaef45e86a7cea894bc5ef21083c9ffc/original-Durstons-F130-x-60-no-ext-1026-1030-510x612-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c5d17949e5f8cffb73b01f31f89a69a/original-Durstons-W130-x-60-no-ext-mills-510x612-1.jpg2024-09-25 15:41:01 UTC6152235Note: The photo shows some surface rust, however, this is caused by condensation and it will be removed when the drums are placed on the ice lathe and dressed prior to useChain Making/ManufacturingIce Diamond Lathesused5846-160Pawtucket, RIhttps://www.goldmachinery.com/listings/6152235-used-5846-160-used-roll-for-ice-diamond-cutting-lathesmooth18" long x 9" diameterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/561d2f05f756119fdf1f552b94df3e1d/original-5846.jpg2024-09-25 15:40:52 UTC6152236Scroll Down To See Video! Durston Tools’ TUI Powered Rolling Mill range creates the same quality and output you expect from Durston Tools’ powered mills but at a lower cost. Where it matters the same components are used from the Core DRM range, such as the actual mills, rolls and casting gears. The cost savings are made by replacing the steel gearbox with an aluminium one, replacing the cast iron plate and main guard with steel and by having one central emergency stop button. As with all Durston Tools’ powered mills, the TUI C130 has variable speeds, as standard, in forward and reverse plus two sets of extension rollers securely stored behind black guards. The rolls themselves are combination rolls including 11 square wire grooves from 8mm to 1mm and a broad, flat rolling surface to create a perfect finish every time. The 1.1KW motor provides consistent power through the lifetime of the mill. Digitally controlled variable speeds from 5 to 20 RPM means you have complete control over each roll and the side extensions provide four half rounds of 4, 3, 2, 1.5 mm for additional versatility. The same standards of production and manufacturing are applied to the TUI range as you have come to expect from Durston Tools’ range. Technical Details: Available Ex-Factory, TN, USA Priced for: $3,575.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewTUI-C130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152236-new-goldpro-durston-tui-combination-130mm-powered-rolling-mill130 kg110KG830390540116Combination651302 & 1.5mm, 3, 48mm110V, 220VTUIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6ef94e0d6d1513cb6d6733944c456d6/original-Durstons-TUI-C130SSP-pic1-1091-510x612-e1571945698635.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a58e5c3a8bfc4b6e8ccfd6a6a3ce81d/original-Durstons-TUI-C130SSP-pic1-1091-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b649b15bbccf444baf45be12d61f878/original-TUIC130SSP_1091-510x503.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3b8590da7846b12e5bb1c06a8a9c04a/original-Durstons-C130-x-60-rolls-1025-510x612.jpg2024-09-25 15:40:59 UTC6152237110V/1PH/60HZ Equipped With: Wire feed system Operating manual Foot pedal Recently re-worked - ready to runChain Making/ManufacturingLink Machinesused5286-130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152237-used-5286-130-crawford-electric-link-o-matic-link-forming-machine-model-el060 375 Round links.018" - .072".093" - .375", outside diameter25" x 28" x 15" high100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad9ccf0e1fecfd8005937b34d8e22fcc/original-IMG_0499-e1701184143735.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64aec3fd4e649e2d91c2f898e63d5898/original-IMG_0505-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63468a3daac6bc9cbc07e6b324d345b0/original-IMG_0499-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61be5af81480a53aad4f514f0b2fcd1c/original-IMG_0500-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6164cc76de15738e8e5c53651fad4b17/original-IMG_0501-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50570ca78b25002efeacff38623123f9/original-IMG_0502-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa228ec4c1e2e55eca4e744c95b897ef/original-IMG_0503-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6ca87033df07ee6325f045b702b5c9d/original-IMG_0504-1024x768.jpg2024-09-25 15:40:56 UTC615223860260.0Scroll Down To See Video! Automatic Hydraulic Power Hollow Cable Chain Making Machine – with Plasma welding ( including ONE complete set Tooling ) SMC Pneumatic transmission Panasonic Servo Motor Transmission Mitsubishi PLC Control MCU Control Resistance pulse plasma welding 50 L Oil Pump Station 2.2KW 3HP 1430 rpm 7 Mpa /Flow & 16Mpa/Press Multi system control Air Cooler system Vertical hydraulic cylinder stroke investigation X 1 Vertical hydraulic cylinder X 1 Horizontal hydraulic cylinder X 1 10 inch Touch Screen 7 inch LED Display 200 X Digital microscope Koganei DTRY-ELL01 Electrostatic eliminator Full automatic electrode compensation device CE Safety protection device Radiation Protection Goggles Manual lifting aluminum + acrylic protective cover Measurement 165 High X 80 Long X 110cm Width Weight Net 680Kgs 3 OPTIONS FOR CHAIN: 1. 1.20mm Atom chain is currently in the same style as the world's smallest chain (Italy OMBI products, but no, we are one dimensional welding) is a fully automatic welding (invention patents), and because the welding causes chain, we can make smaller specifications such as: 1.00mm, this is a global need products. With a very large potential for development. 2. 2.50 - 8.00mm Hollow Cable chain, is the world's first fully automatic production equipment, products than anything on the market with the specifications of the chain of 1/3 light weight, and is a new multifunctional hydraulic power of a process (patent), plasma welding device is used in the automatic compensation system (patent), 3. Cobra chain is currently on the market dimensional one fully automated mode, and the specifications are the smallest on the market (outside diameter 3.80mm), you can make any metal materials Three equipment, mature technology, stable equipment, one person can control the operation of 30-50 units OPTIONS: Cutting Mold Complete... $485.00 Vertical Press Mold Complete with Push Device... $1,587.00 Horizontal Mold Complete... $989.00 Precision claw box... $715.00 Feeder & Push Rod & Sleeve & Holding guide... $840.00 Available Ex-Factory, China Packing/Crating/Freight AdditionalChain Making/ManufacturingChain Making MachinesnewAHHC-PPawtucket, RIhttps://www.goldmachinery.com/listings/6152238-new-goldpro-automatic-hollow-cable-chain-making-with-plasma-welder-machine2.50 – 8.00mm20 – 25 Link/min.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea62a79503bceaf3d8551b0489af9889/original-1-e1502976545228.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e14b847fa5ce7337f8d1853c6cfed9a/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d1b523956a06cb56015f86554fc7b4f/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3ab5dab9afb89e2a600c96c40e53473/original-IMG_20170814_174727-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2549fe0fa07014eab4768f47e04d4554/original-20170510_130007-e1502979035308-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3a631dba2dd0b5c4624cdf85871b669/original-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd194de564d6beab92686e8d0760953a/original-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1cc195ce99e10f5bda85bfc9c02812c/original-4.jpg2024-09-25 15:40:40 UTC6152239115 Volts / 1 Phase / 60Hz Last utilized doing casting chrome metal frameworks in the construction of removable partial dentures Equipped With: Crucibles and Tongs as Photographed Manufacturer's Link:Wire, Plate & TubeMelting & Continuous Castingused3250-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152239-used-3250-185-galloni-induction-casting-melter-melting-furnace-oven-for-gold-chrome-platinum0.25 hp27.3 Amps3 Kw3600 to 3800 Volts1,550 Mhs.600 Amps Ia Max.100 Amp Ig Max1 Liter Per Minute450 RPM3.5" D x 2.5" L44" H x 22" W x 29" D475 lbInduction melting, Automatic optionhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5681fb6b229284694bd71e3c521d025/original-1-e1524154384142.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dae93ee80156625fd3da86a0495b5150/original-IMG-4881-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b28230dd2398fdf23cd6f8a0bd1909de/original-IMG-4882-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1afc56b70f67fca9a8c33c1b76650321/original-IMG-4884-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4573dd3f045c4fed21689156fc567d15/original-IMG-4888-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/934b7133b8618b4accb0839d9954d1f9/original-IMG-4889-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c09c67abcc1e8f8f00fff0d7b786aabe/original-IMG-4890-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2ca5cb3bac9409c800141d9c657fa14/original-IMG-4901-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de48d153f1bb25bfb53dccbfec1692c6/original-11-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/641ecd648c063f57c05a443bc3c86bc3/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af74fc5740716f247b1944960c7719e8/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/787aca371fc4443eb241afadbe729422/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e44294fe07c810f984f9b7ca7b42cf9/original-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bacee272e760bddbb60a142b58d86423/original-IMG_5463-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b3dd29e2abd63279b29b5982fe32900/original-IMG_5465-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85e536f8930ac925259ede6f50414952/original-IMG_5466-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f019d20ff059bfd66b34a0499f0caeaa/original-IMG_5467-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a3bbe80571e8878fb5fed51ccf540b3/original-IMG_5468-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f73ffda4419cb54d9d6fdcdcdb6c4f7f/original-IMG_5470-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cef71cd3c277918af3f797e096e75d31/original-IMG_5471-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/912da0b76cbdb7373174b0181231ba37/original-IMG_5462-1-1024x768.jpg2024-09-25 15:41:12 UTC6152240110V/1PH/60HZ RPM 1725 Equipped With: Wire feed and guide Steel standChain Making/ManufacturingLink Machinesused9256-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152240-used-9256-100-jump-ring-machine-tooled-020-wire-x-1-20-ring.020" wire x .1.20" approx. ring diameter3/4 HP33" x 21" x 63" high575 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8f2e87a4cd9a7713d6c29016244d37c/original-IMG_5741-e1573574640815.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/033f7758aa989d5f831f753b7d7d968a/original-IMG_5749-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0383d429c0eaa8d5393c2d86ac57e791/original-IMG_5754-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77bef031b706090f21a5f736d504d6dc/original-IMG_5740-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4eeb88bf262dffa770bf0c725736d869/original-IMG_5741-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e97f7dfca512403bc973f2e6c808a839/original-IMG_5742-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd7f4d4a00cad4516f2e03c1c317d1a4/original-IMG_5743-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1395620c972923fb1e9b579becbeacff/original-IMG_5744-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/291f18164aa5afd85b30b98713f3aebb/original-IMG_5748-1024x768.jpg2024-09-25 15:40:56 UTC6152241Two vertical heads prearranged for discs 110 mm diameter. Suitable for any kind of chain. Maximum 1,30 mm wire. Complete with bench, suction plant, service spanners, spare belts and CE 98/37 certification. 230-400V / 50-60Hz / 1-3 phase Sample Photos Vertical Head – Horizontal Head Availability: Ex-Factory, Italy € 45.680,00Check the latest exchange rateChain Making/ManufacturingDiamond Faceting ChainnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152241-new-ompar-ra-2000-diamond-cutting-machine-for-surfacing-bevelling-on-chain110 x 80 x 183(h) cm600 Kg500 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7c2c278660f8690574fd289896b0496/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97d6aa696fb01b76818a3311993149fb/original-2.gifhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b721e4de7ead688032b5e3341cec618/original-RA2000Prices.gif2024-09-25 15:40:55 UTC6152242Scroll Down To See Video! Durston Tools is the market leader in precision rolling mills and no wonder; the TUI 130 Double-Sided Power Mill is constructed from cast iron for optimal strength and rigidity. The TUI powered rolling mill range creates the same quality and output you expect from Durston Tools but at a lower cost. Where it matters the same components are used from the Core DRM range, such as the actual mills, rolls and casting gears. The cost savings are made by replacing the steel gearbox with an aluminium one, replacing the cast iron plate and main guard with steel instead and by having one central emergency stop button. As with all Durston Tools powered mills, the TUI double sided 130 has variable speeds, as standard, in forward and reverse plus four sets of extension rollers securely stored behind black guards. The rolls themselves provide a dedicated flat rolling side, with a width of 130mm and a maximum roll thickness of 6mm, and a dedicated square groove wire rolling side, providing 19 grooves from 10mm to 1mm to create a perfect finish every time. The 1.1KW motor offers consistent power through the lifetime of the mill. Digitally controlled variable speeds from 5 to 20 RPM means you have complete control over each roll and the side extensions provide for half rounds of 8, 6, 4, 3, 2, 1.5 mm for additional versatility. The same standards of production and manufacturing are applied to the TUI range as you have come to expect from Durston Tools’ range. Safety features include a central emergency stop button, safety bars at the front and rear of the mill, guards covering the extension rollers at both ends as well as guards covering the top gears. Technical Details: Available Ex-Factory, TN, USA Priced for: $4,870.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewTUI-130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152242-new-goldpro-durston-tui-130mm-double-sided-powered-rolling-mill200 kg160KG500390540196Combination651301.5, 2, 3, 4, 6 and 8mm10mm110V, 220VTUIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a09ffed9e9e72bae73e91ef774d7291/original-Durstons-TUI-130DSP-Rolling-Mill-pic1-1094-1090-510x612-e1571945184621.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d93c2d58001b835a3bb208296804420f/original-Durstons-TUI-130DSP-Rolling-Mill-pic1-1094-1090-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3224ac61dcb923bdcf51581bad70ca3/original-w130-e-510x646-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82efc7c2d92615e93b7fd19b757c0c4e/original-DRM-F130-RE-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37fae5ddf39f347698ebcdf023460702/original-TUI130DSP_1094-510x552.jpg2024-09-25 15:41:00 UTC6152243Chain Making/ManufacturingLink Machinesused8646Pawtucket, RIhttps://www.goldmachinery.com/listings/6152243-used-8646-used-s-n-link-making-machine18 x 14" x 18"h Less Motorhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d76da3c8121f0fbeac55ce1ede907d02/original-8646.jpg2024-09-25 15:40:56 UTC6152244Scroll Down To See Video! 2 HP MOTOR FORWARD/REVERSE OPERATION LOW VOLTAGE CONTROLS WATER COOLED AUTO STOP/START OA MACHINE DIMENSIONS APPROX. 6' LONG X 5' WIDE X 3.5' HIGH Equipped With: FORWARD / REVERSE FOOT PEDAL CONTROL DIGITAL TEMP CONTROLS 3-GANG TOOL HOLDER 4- DIAMOND TOOLS SMOOTH DRUM 19 1/2" DIAMETER X 11" LONGChain Making/ManufacturingIce Diamond Lathesused3038-160Pawtucket, RIhttps://www.goldmachinery.com/listings/6152244-used-3038-160-tornos-ice-diamond-cutting-lathe-complete-with-built-in-refrigeration-system220/3ph 50/60 CYCLE30-40-60-90-200-300-400-600 RPMAPPROX. 1750 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbbfec243f1b6a62d79f44102561f87d/original-1-e1573848469924.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ee52cf7b839f2e2b395d5de50ebefab/original-IMG_5826-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1567937fbd80f29de986de969289fad7/original-IMG_5827-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ade031a53ff6529c90088af26fd13fc5/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b136f410c6fff7a3f3470b6cf7c33898/original-IMG_5800-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8f182a1aeda3fa7b06c09e235877523/original-IMG_5805-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6534bf5673c8a8ada38ac2c9dccf799/original-IMG_5815-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb01e7c08a19fbbc0a20ea4110a68e88/original-IMG_5816-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1917f2ecf202ac86b5cb722bda527f0c/original-IMG_5817-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d53eebd11449db2506c1254da9ebb4e9/original-IMG_5818-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c557103192f4ace2bacf3e43f7caf0ba/original-IMG_5819-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ade205573689c46e1a88c322b75e436b/original-IMG_5820-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/451aef446b5a721f6b20338b74382c2c/original-IMG_5822-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87ff9d024e2b456fb0797d75a0699fa3/original-IMG_5823-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e59044dcec681b0ba2d0d10f2afe5c4/original-IMG_5824-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0703fc017ccbb22451ad179896b56be6/original-IMG_5825-1024x768.jpg2024-09-25 15:40:59 UTC6152245110V/1PH/60HZ Equipped With: Wire feed and guide Steel standChain Making/ManufacturingLink Machinesused2465-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152245-used-2465-100-nickerson-jump-ring-making-machine-020-wire-x-100-ring-diameter.020" wire x .100" ring diameter1/3 HP, Gear Motor, 288 Rpm36" x 22" x 55" high375 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/947824aee01389b8a184b702e6272697/original-IMG_5519-e1572439858734.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6aeb5f7855faff773c047c6feac67da5/original-IMG_5519-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51507b576e282939f936286731380af8/original-IMG_5520-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ecc4e16f46e9857a5883ddce5f11753b/original-IMG_5521-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d673791ec866e9ec1ec1c5cf8d9e96bc/original-IMG_5522-768x1024.jpg2024-09-25 15:40:55 UTC615224637 PCS TOTAL INCLUDING ALL PHOTOGRAPHED MAX Temp 2,500°F/1,371°C. Ceramic sleeves can be used with graphite liner or by itself for melting gold, silver, brass, copper and bronze. 300 GRAM CERAMIC CASTING CONTAINER CERAMIC CRUCIBLES CERAMIC SLEEVE 800 GRAM CAPACITYWire, Plate & TubeMelting & Continuous Castingused5923-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152246-used-5923-185-manfredi-crucibles-set-ceramic-sleeves-graphite-liners-for-induction-melting-gold-silver-jewelry2"1-11/16"2-5/8"43-3/4'5/16"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2afc3c085cb8446ccd736eebaa263511/original-IMG_8103-e1689944851353.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96f3e65897b7c8b942e677f1583272db/original-IMG_8106-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44932a533801b7ebcd82d7269f22bfe0/original-IMG_8107-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f65184868338dc1347d3e195c1be3310/original-IMG_8108-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bec15fe593ad0c2f341ecc185c7e7b53/original-IMG_8103-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b35c2b26a8f2260524a82c0e36f51033/original-IMG_8104-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4aa343b9ba5ba9914b14cedf4197c4bc/original-IMG_8105-768x1024.jpg2024-09-25 15:41:02 UTC6152247110-220V/3PH/ 50-60HZ, 3 TO 5 Amps Laser welder alternative: Can be attached to any make or model linking machine, old or new Chain welding capabilities Features: Makes 3700 welds per hour, any metal from .12 to .70" diameter ( .3 to 1.8mm) Quick change weld electrode and ceramic cup Infinitely variable DC weld voltage, 12 to 90 volts High, low, medium weld energy selection Manual test mode override for welder set-up Argon gas gauge and regulator Equipped With: Foot switchChain Making/ManufacturingLink Machinesused2714-130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152247-used-2714-130-abi-model-mini-link-it-lightning-welding-system12" x 12" x 20" high40 lbs. ( 18 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/058ced6bfbc3dbeb68b0da5fb0656971/original-021-e1525372315219.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9a926518e31938aff662009db7ca851/original-021-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dba8d47de95b50e3db197c95e0058c7f/original-022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1334d9823377dea46067bdb79a6dbb70/original-016-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f1b8dd6c17f6e3d1f735f7a7f054fa3/original-017-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d487728d65e510ff977f0bea0182525d/original-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/476afa6267aa670739ca96a1aca5b090/original-019-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/956040daa0f6dac53c54f17dfb166c74/original-020-2-1024x768.jpg2024-09-25 15:40:57 UTC6152248TECHNICAL FEATURES Thermocouple of the crucible directly in the bath but protected by a special sleeve – T-c connected to the PC Thermocouple for the die connected to the PC Special injector of gas (Argon or N2) for the internal protection of the crucible Special injector of gas (Argon or N2) for the internal protection of the dies Die and crucible are externally protected by a special ceramic jacket to avoid a fast downgrading of the graphite from the oxygen. The furnace is equipped with a Microprocessor with a LCD display having the possibilities to change till 8 different languages The furnace is equipped also of a printer integrated in the panel board able to print all the data of working – The microprocessor has the possibilities to memorize till 100 different pages containing all the information concerning the material to treat – the working parameter and date. Furnace will be equipped with automatic shear installed directly on the machine( see the above pic on left side) Special mechanical protection system for accidental casting of the metal. Double series or rollers cooled down by water circuit Special Cooling jacket get from a bronze block special worked that surround perfectly the die to get a better cooling efficiency. Possibility to apply for special alloy like white or red gold alloy – a device that cool down quickly the alloy. Technical data sheet Extraction profiles Aspiration for the Exhaust over the crucible: (minimum speed required) 10m/sec; Art.Z52-03: Induction melting furnace at medium frequency for the pre-melting of precious-metal alloys in graphite crucible, with automatic temperature control. Equipped with a special tilting mechanical frame to allow the pre-melted metal contained in the crucible to be poured on a crucible of the continuous casting machines. The melting head is fixed to the frame of the continuous casting and placed in the way that the pouring will be made through a remote control device. Equipped of electronic generator of new conception, which allows: More energetic safe with low losses; More silences Less encumbrance More precision in the power control Equipped of microprocessor controller with display at liquid crystals for the regulation and the checking of the furnace. VIEW OF THE TILTING PREMELTING UNIT Technical data sheet Useful size of the crucibleWire, Plate & TubeMelting & Continuous CastingnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152248-new-goldpro-ieco-continuous-casting-machine-15kg-for-plate-up-to-100mmIeco Continuouscasting capacitykg.15withmax plateproductionup to mm.100.MaxTemp1500°C Automaticpre-melterkg10Agcapacity  installedin thecontinuous casting. Equipped  with  automatic  cutting  shear  installed directly incontinuous casting Settledwithcrucible,die(die’ssizebespecified)andstartingbar. 01 114.000,00220V or 380V 50/60 Hz / 3 Ph15 Kw;~20 Khz;14,8 Kg (AG925)Max. 100×10 mmMax 40 X 2mmMin. 6 mm – Max. 10 mm1500° C;0,05 1,00 m/minTo be specified by the CustomerPressure 2 – 4 bar;~ 20 l/minNitrogen or argon20 l/min;GPL or Propane gas;4 to 8 bar;~ 2050 x 1400 x 2550 mm.;725 kg;415V 50Hz/three phases;GPL or Propane gas;0,5 m3/h;(minimum speed required) 10m/sec;Description Nr. TOTAL PRICE (€)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfb88483046e9a48cb5c4bf81f96851b/original-grgtrg.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fe604eaa6bf3909e7740ee8e8db1313/original-sdfdsf.png2024-09-25 15:41:00 UTC6152249Chain Making/ManufacturingLink Machinesused8412Pawtucket, RIhttps://www.goldmachinery.com/listings/6152249-used-8412-used-nickerson-type-cable-link-making-machine16" x 14" x 18"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d55a548fb67497c27ff16d42cdcf2fb6/original-8412.jpg2024-09-25 15:40:56 UTC6152250Durston Tools is the market leader in precision rolling mills and no wonder; the DRM C130 Powered Rolling Mill is constructed from cast iron for optimal strength and rigidity. The C130 is a powered combination mill for both flat metal and square wire powered milling. The 1.1KW 110-volt motor is powerful enough for continuous operation, which is why Durston Tools’ mills have such a long working life. This versatile package has variable speeds from 5 to 20 RPM and a highly efficient, near-silent operation. The rolls are especially induction hardened to 64 RC; the main barrel to a depth of 6mm, ensuring your rolls last a lifetime. The rolls themselves are combination rolled providing both flat and square wire rolling. The mill includes 11 square grooves of wire rolling from 8mm to 1mm. Side extension rollers offer a total of four half-rounds of 4, 3, 2 and 1.5mm. Safety features include an emergency stop button, safety bars at the front and rear of the mill, guards covering the extension rollers as well as guards covering the top gears. Part of Durston Tools’ award-winning range of products available since 1961. Technical Details: Available Ex-Factory, UK Priced for: $4,450.00 USD Available in 110V and 220V Note: Price Subject to Change Without NoticeWire, Plate & TubeNew GoldPro® Durston Powered Rolling MillsnewDRM-C130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152250-new-goldpro-durston-drm-combination-130mm-powered-rolling-mill150 kg130KG500390540116Combination651302 & 1.5mm, 3, 48mm110V, 220VDRM Poweredhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acf90312d8f207bdbae7411a127a103f/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-e1571946326555.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc623210843d4c5f4d40f806a4578d1d/original-Durstons-DRM-100-SSP-Powered-Rolling-Mill-pic1-1071-1072-1073-min-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b8365a372cbb1983d004f30e385b280/original-Durstons-DRM-130-SSP-Powered-Rolling-Mill-pic1-1075-1076-1077-510x579.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb648c4fb572fa34769edea0ee9c26c8/original-Durstons-C130-x-60-rolls-1025-510x612-1.jpg2024-09-25 15:40:58 UTC6152251220V/3PH/60HZ For Melting Gold/Silver Equipped With: Temperature display Power display Spare crucibleWire, Plate & TubeMelting & Continuous Castingused2621-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152251-used-2621-185-opdel-6-kg-induction-melting-furnace-model-fs056 kg.6 kw36" x 24" x 36" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/625dddcdf63351c1761edb4127e2fa5f/original-IMG_8465-e1585597165695.png2024-09-25 15:40:59 UTC6152252Crucible size 3-1/2 diameter by 7" depth Estimated weight 200lbs Overall size 30" x 18" x 35"h For 40kw MachineWire, Plate & TubeMelting & Continuous Castingused6728-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152252-used-6728-185-induction-melting-melter-furnace-10kg-capacity10 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d73a51f49272b95d4911504b58c8338c/original-time-015-e1378749557761.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1ffdf77a1d6bee6e647c1061c0bc05e/original-6-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44a79d97f974173341beb51682c51cb0/original-6-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8db1f2c6b61d2fe6e4aaf0fc9cbe7314/original-time-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd9af9450b3ea5c47d20d56eef745660/original-time-0151.jpg2024-09-25 15:41:02 UTC6152253Art.Z50-303MI Bench top Vertical induction furnace for continuous melting and casting of precious-metal alloy sections in wire and plate form. Equipped with processor for setting and storing 99 automatic melting programs, with display and printout of all parameters set, with possibility of switching-over for manual melting. Equipped with one single-inductor working station and melting head integrated in the structure of the furnace. Circular die cooling. Medium frequency generator of new concept. Furnace suitable for: Technical data sheet Power supply 220/380V 50/60Hz/three phases; Power of the furnace 3 kW; Working frequency of the converter ~20 Khz; Usefull size of the crucible (18kt gold) 2,4 kg; Max working temperature 1250° C; Water consumption (T° 15 to 30°c – Pressure 2– 3 bar) 15 l/min: Gas for protection Nitrogen or argon; Gas consumption (0,5 – 1 bar) 10 l/min; Gas consumption (0,5 – 1 bar) 10 l/min; Compressed air Dimensions 650x860x700 mm.; Weight 106 kg ; N.B.: Data here above are not binding and they could be changed during the construction phase of the machine Consumables Extra crucible Extra ceramic jacket Extra die for plate Starting bar for plate Extra die for wire Starting bar for wire Extra thermocouple Kit material replacement crucible/dieWire, Plate & TubeMelting & Continuous CastingnewIECO Kg.3Pawtucket, RIhttps://www.goldmachinery.com/listings/6152253-ieco-goldpro-continuous-casting-furnace-kg-3Min. 5 mm - Max. 10 mmMax. 35x5 mmNOhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa9200d918f7f188fe5d83230ec427e6/original-ieco.png2024-11-08 18:00:07 UTC61522541/2" opening for pouring on top side of crucibleWire, Plate & TubeMelting & Continuous Castingused7487-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152254-used-7487-185-19-graphite-melting-crucibles-2-kg-capacity2 kg1-1/2"4"2-1/2" x 2-1/2" x 5"3 lbs.$ 24.99.- EACH$19.99 EACHhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d10d8c63a9f1b3ce79bb9a8d4ee1a9d5/original-n-001-e1360941060368.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b91c65765d0500d5dd796641e868f08/original-n-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b22d5c60c31fb448c3e8e6b5cade1da/original-n-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed40f7388c08d01e042741c040ca705f/original-n-0011.jpg2024-09-25 15:41:02 UTC6152255Crucible size 2-3/4" diameter by 6" depth Estimated weight 200lbs Overall size 33" x 17" x 35"h For 40kw MachineWire, Plate & TubeMelting & Continuous Castingused6729-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152255-used-6729-185-induction-melting-melter-furnace-10kg-capacity10 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1fb3faf7dd88db026828e4c291cdf9bf/original-time-014-Copy-e1371562360121.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b8efaefba7e783ff8d9b8093bffda49/original-6-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afd66aeabff9a0bd03a35f864d46e846/original-6-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/060dc1edeaef09e2dfbe95b38a9c2ea9/original-time-013-Copy.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ddf8fc79bbc3259bef107dba8ab23f9/original-time-014-Copy1.jpg2024-09-25 15:41:02 UTC6152256Wire, Plate & TubeMelting & Continuous Castingused7483-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152256-used-7483-185-48-graphite-melting-crucibles-3-kg-capacity3 kg2-1/2" diameter4"4" X 4" X 5"8 lbs.$ 48.- EACH$24.99 EACHhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd39cca3b2e170c4a3f04d7617b0b436/original-c-006-e1360940135136.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/487efe9a279562af3c8300c214ff4f8d/original-c-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3baed39a7cb533e15e6759a60623b2ad/original-c-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f283e97d3ad4fd3fb5439ec105fa0ab6/original-c-0061.jpg2024-09-25 15:41:03 UTC615225830360.0Art.Z50-305MI Vertical induction furnace for continuous melting and casting of precious-metal alloy sections in wire and plate form. Equipped with: - Micro-processor for setting and storing 99 automatic melting programs, with display and print-out of all parameters set, with possibility of switching-over for manual melting. - Equipped with one single-inductor working station and melting head integrated in the structure of the furnace. - Circular die cooling. - Medium frequency generator of new concept. - Cooling device on the extracting roller - Special crucible and dies made with a high grade density graphite with conical connection system - The group Crucible / die is inserted in a special ceramic jacket that prevents external oxidation of the graphite for a longer life and easy replacement Furnace suitable for: Technical data sheet Power supply 220/380V 50/60Hz/three phases; Power of the furnace 5 kW; Working frequency of the converter ~20 Khz; Usefull size of the crucible (18kt gold) 4,0 kg; Max working temperature 1250° C; Water consumption (T 15 to 30°c – Pressure 2– 3 bar) 15 l/min: Gas for protection and process Nitrogen or argon; Gas consumption (0,5 – 1 bar) 10 l/min; Compressed air 4 –8 Bar Dimensions 650x860x150 mm.; Weight 150 kg ; Consumables Extra crucible Extra ceramic jacket Extra die for plate Starting bar for plate Extra die for wire Starting bar for wire Extra thermocouple Kit material replacement crucible/dieWire, Plate & TubeMelting & Continuous CastingusedIECO GOLDPRO® Kg.5Pawtucket, RIhttps://www.goldmachinery.com/listings/6152258-used-ieco-goldpro-continuous-casting-furnace-kg-5Min. 5 mm - Max. 10 mmMax. 50x5 mmØ Ext 16 mm x Ø Int 12 mm or 20 x 16 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcfc80790c5c9bf4cb0b96de602e793a/original-kg5.png2024-09-25 15:41:01 UTC61522590110 volt / 1 ph / 50/60 cycle 1/2 HP RPM 1725 Equipped With: Gear Driven Dation DriveWire, Plate & TubeRolling Mills, Powerused5310-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152259-used-cavallin-wire-reduction-gear-driven-power-rolling-mill100mm ( 4")52.5 mm ( 2")3.5 mm to 0,5mm24" x 20" x 21" high125 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c04f57b04506fa31bf1e827a85c0ee28/original-IMG_2977-e1650654678153.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4658b9ebe2a5c4cbb646dccea19c733e/original-IMG_2981-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27f195d4bf608aa55fecf6e9d4d22441/original-IMG_2982-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39673ad9f10e6f8334b31d5e26109544/original-IMG_2983-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffdd69f2aaa02160da9b29b01fa1cce2/original-IMG_2984-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a69b22475b8c9a46b331a9e37193f00/original-IMG_2977-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8734c19fbab9f347d62ee87bb7feb8f3/original-IMG_2978-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29d6f58b8082507906584f1c89e42f83/original-IMG_2979-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4a59837ebf21b54f7606bb94ab19a7c/original-IMG_2980-768x1024.jpg2024-11-06 15:48:59 UTC6152260Vertical induction furnace for continuous melting and casting of precious-metal alloy sections in wire, tube and plate form. Equipped with processor for setting and storing 99 automatic melting programs, with display and print-out of all parameters set, with possibility of switching-over for manual melting. Equipped with one single-inductor working station and melting head integrated in the structure of the furnace. Circular die cooling. Medium frequency generator of new concept. Furnace suitable for: This can be equipped with an option mounted Shear, which is available for an additional cost. Machine Priced for 39.370,00 EURO Ex-Factory, Italy *Prices subject to change without noticeWire, Plate & TubeMelting & Continuous CastingnewZ50_310MIPawtucket, RIhttps://www.goldmachinery.com/listings/6152260-new-goldpro-ieco-continuous-casting-machine-10kg-for-wire-plate230/400V 50/60Hz/three phases10 kW5 ÷ 10 Khz8,1 kg1200 Degrees C20 l/minNitrogen or argon20 l/min4-8 bar890x600 x 1660 mm.270kgMin. 5 mm - Max. 4x10 mmMax. 70x6 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db6a660ebf99161608f78903e4a48a88/original-IECO.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64fb9c19f09b3c0d8cac4745c024b22d/original-IECO_SHEAR.png2024-09-25 15:41:00 UTC6152261S/2/1500Sheet Rolling Machine for Gold & Silver Equipped With: Side roller for designed purpose Lubrication system Heavy Duty Gear Box Drive System Emergency Stop Chrome plated rolls This rolling machine is made of high-grade steel and the rolls has been hardened and plated with chromium so that it can flatten both gold and silver.Wire, Plate & TubeRolling Mills, Powerused3427-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152261-used-cavallin-type-6-x-4-double-sided-power-rolling-mill-with-side-rollers-for-gold-silver-plateHK Malvi Industries3/20203 PHASE415V3HP150 by 95MM1070x460x1350 MM390 KGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/406184f504bf62115c04be4c233254e2/original-IMG_1539-e1713448231207.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7fe6b4064256926c8256661a3d1d816c/original-IMG_1546-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebbe46906dd714df34cfeecb22e8c5be/original-IMG_1547-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b248538c3f1157968ed3f880f6825676/original-IMG_1548-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d65cdc6488ade0e3d9d58454e45776ed/original-IMG_1550-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf06f34a994c6ec1d82d2616c330a2a0/original-IMG_1539-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4af54240aa9c4004ef339b3b6a79500d/original-IMG_1540-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/913dc1b951fc3411d77bfe210b5135fa/original-IMG_1541-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a0be0de9c2900393fed3f72cb6bcbd7/original-IMG_1542-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9daddd7609743fc371e39d4348076dc4/original-IMG_1543-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5832405bb42cf46c30a6afaae20a0683/original-IMG_1544-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfdb9f44963155d1c767e15b8a53de71/original-IMG_1545-768x1024.jpg2024-11-06 15:49:55 UTC6152262S/2/1500Sheet Rolling Machine for Gold & Silver Equipped With: - Side roller for designed purpose - Lubrication system - Heavy Duty Gear Box Drive System - Emergency Stop - Chrome plated rolls - This rolling machine is made of high-grade steel and the rolls has been hardened and plated with chromium so that it can flatten both gold and silver.Wire, Plate & TubeRolling Mills, Powerused3426-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152262-used-cavallin-type-6-x-4-double-sided-power-rolling-mill-with-side-rollers-for-gold-silver-plateHK Malvi Industries3/20203 PHASE415V3HP150 by 95MM1070x460x1350 MM390 KGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4a92c751b25354e97f2cbfd39d93d9f/original-IMG_1532-e1713447510466.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63746b6ad6c100fbca61531f7f540783/original-IMG_1537-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6c9723f830d93d342ce786c8b00e11f/original-IMG_1532-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b537930704517d29ac3e541ee289ca00/original-IMG_1533-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dcede1f9b69898f5f2134daab0bba9f/original-IMG_1534-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e670c1de364bb4b7c65772c777bbf527/original-IMG_1535-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcf817b3f8219db2c48a5ae102cec193/original-IMG_1536-768x1024.jpg2024-11-06 15:48:31 UTC6152263Scroll Down To See Video! New Patented :Automatic Figaro Milano Chain Making Machine for multiple sets of different material, more groups of different design, multiple sets of different character...the World's 1ST design matching chain WITH increased function of welding. Patented Automatic Hydraulic Power Figaro Milano Chain Making Machine – with welding device 4 Color Material acceptable 4 Embossed or Punch out surface design 4 The length of the different link ( more number design acceptable ) ( including ONE complete set Tooling ) SMC Pneumatic transmission Panasonic Servo Motor Transmission Mitsubishi PLC Control 50 L Oil Pump Station 2.2KW 3HP 1430 rpm 7 Mpa /Flow & 16Mpa/Press Multi system control Air Cooler system Vertical hydraulic cylinder stroke investigation X 1 10 inch Touch Screen 7 inch LED Display 200 X Digital microscope Koganei DTRY-ELL01 Electrostatic eliminator Full automatic electrode compensation device CE Safety protection device Radiation Protection Goggles Manual lifting aluminum + acrylic protective cover 168 High X 90 Long X 120 cm Width Net 380 Kgs OPTIONS: Complete Tool Set.... $3,240. USD Cutting Mold Complete... $3,240. USD Precision Claw Box... $1,680. USD Plasma Welder... $2,470. USD Equipped With: Ex-Factory, China Starting at $47,900. USD Plus Crating and ShippingChain Making/ManufacturingChain Making MachinesnewAFM-S1Pawtucket, RIhttps://www.goldmachinery.com/listings/6152263-new-goldpro-automatic-figaro-milano-chain-making-machine-with-soldering-available1.20 – 3.00mm20 – 25 Link/min.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d9435322b68e5a73af3c5cc1ae8e5034/original-111-e1519834483814.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7177ea33a8a4b93ee5a746fb5ac8d258/original-112.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f02b5731e27f961c79da869aa1cafdd/original-21.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47f3a4e1a5ac46b370fa07769f25a8d5/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c84a3f70080e160fe295db63a9c895d9/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14a3af0085c056ada9ae421bebe7e274/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43768c76a206a7b81ee558493fcc6a7c/original-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cce382c8d7169ab3163639d67f8006e2/original-7.jpg2024-09-25 15:40:38 UTC615226419930220-440V/3PH/60HZ Roll size 5" diameter x 8" wide Variable speed motor control Equipped With: Complete Spare roll set Take up unit Pay off unit Roll wipers On board control console Hand operated screw downs Entrance and exit tablesWire, Plate & TubeRolling Mills, Powerused1239371FM2662-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152264-used-n-ferrara-4-high-5-x-8-precision-power-finishing-rolling-mill-for-flat-stock2" diameter x 8" wide75" x 71" x 76" high15 HP3250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3ca8945f3e30a85f8a6c39de57d1b21/original-172-e1525865883952.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fa998449c1b2242417cd258f1e962ce/original-177-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/855c1844e110e5fecacc9129d8e59828/original-178-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccd6915cd32c73d69a924fadd7e9251a/original-179-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/caf6cbae6e468b7908aaeb1d4f940a15/original-180-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/446c05d715a9e92348c7b58b4313cd18/original-172-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b3605d4bcdf5a0d2aba8b6580fcde72/original-173-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fd944b7f00c02e861f4d130bcf4d76c/original-174-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84063c6066f48735dffe1e7f8971649b/original-175-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f9b23fc57521084271cad221835aecf/original-176-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/665dffd516b0cb5aeef6b3c8441cd8fe/original-IMG_1141-1024x768.jpg2024-11-06 15:50:15 UTC6152265Voltage 110 / 220 1 Ph - 50/60 Cycle Roll Length 2" Roll Diameter 1 1/2" Max opening of rolls 1/2" Motor gear box drive 1100 RPM Overall size 23" x 24" x 53" Est weight 220 LBS Equipped with Upper / Lower exit brushes 3" diameter by 3/4 width Rod / Tube guide Equipped With: Take up / Pay offWire, Plate & TubeRolling Mills, Powerused3032-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152265-used-3032-150-buhler-germany-2-hi-precision-power-wire-rolling-mill-with-take-up-pay-off1-1/2" X 2"3/4 / 1https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d58484e1f0b290983ec8011653a94fd/original-1-6-e1570551551980.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f1d7cc3889da6522f128cae408d12fc/original-IMG_4922-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/197260ebaffb1f5ed34d1c14bf6e94f9/original-IMG_4925-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df316defbe94cb8019aa60d195d97ef5/original-IMG_4927-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0fa5e5e2b9a48b92f1bf849e4f961cf/original-IMG_4928-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a46792a045855cb0268ecd9542964f0a/original-IMG_4930-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/741280cfaba74617f80293ec0851194b/original-IMG_4931-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/24ae38a3ebe3740d06bc3f9712ea759a/original-1-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a1dad3cff77d535b8db205495d865c3/original-IMG_4909-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e816e02464a3833f3d3ecc67a938a6d/original-IMG_4910-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af13cf9b6a09ff873ffb9d08a61dd286/original-IMG_4911-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31b085114408a33cca02c2c44ec0eb43/original-IMG_4912-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1b2e8a67b0d9e0456a4771963b7ab74/original-IMG_4913-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d396f89ada8dbafc0ca15ca67f63f0af/original-IMG_4914-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69af9f6c1d93acfc8d992166926adda7/original-IMG_4915-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c404090bd1d0a365a90569a0baaafcde/original-IMG_4916-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a1c25928a5ce4388f804b1c736432f9/original-IMG_4917-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d78c3aaebd06c99d9eabceb91162ac0/original-IMG_4920-1024x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/885ec7a5543435546a14556d99708174/original-IMG_4921-768x1024.jpg2024-09-25 15:41:13 UTC6152266262500.0Cylinder table for both work and support 200mm Working cylinder diameter 95mm Support cylinder diameter 258mm Maximum opening 10mm Variable rolling speed 0-15m / min Cylinder supports with closed loop lubricated bearings 15kW main motor Total installed power 19kw Maximum lamination torque 2620 Nm Controls on push-button panel Power board on the machine (or separate) Dimensions mm 3000x1000xh2200 Estimated weight 4000Kg Reversible "quarto" rolling mill without winders. Intended for the lamination of strips with millimeter thicknesses. Worked and painted electro-welded steel rolling mill base on anti-vibration leveling feet. Rolling cage completely made of painted and varnished steel, complete with thrust screws in hardened steel with bronze nuts. All cylinders mounted on bearings lubricated automatically with recirculating oil and mounted in sealed supports. All hardened and ground steel cylinders with hardness HRC 62-63. Motorized and automatically cooled working cylinders. Support cylinders without motorization. Main motorization with motor running by inverter. Variable rolling speed. Speed reducer and motion splitter. Homokinetic extension on working rolls. Lifting of the motorized upper cylinder assembly and electronically controlled possibility of repeating working patterns. Electrical system with power panel and controls on the machine according to international standards. Three-phase power supply + Neutral (Europe 400V-50Hz) Other power supply and frequency to be established with the customer. Availability: Ex-Factory, Italy Plus PackingWire, Plate & TubeRolling Mills, PowernewModel Quarto 200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152266-new-cavallin-oam-goldpro-model-quarto-200-ultra-precision-strip-rolling-millhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a58cbc22c44851e43f27e0b48376f8e9/original-tt1200.jpg2024-09-25 15:41:03 UTC6152267208V/3PH/60HZ Single speed operation Twin screw downs Equipped With: Heavy duty cast iron stand 1-15 mm 2- 14mm 3- 13mm 4- 12mm 5- 11mm 6- 10mm 7- 9.5mm 8-8.5mm 9- 8mm 10 7.5mm 11 7mm 12 6.5mm 13 6mm 14 5.5 mm 15 5mm 16 4 mm 17 3.5mm 18 3.5mm 19 3mmWire, Plate & TubeRolling Mills, Powerused2539-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152267-used-2539-150-standard-wire-reduction-power-rolling-mill-9-1-2-x-4-1-29-1/2" (w) x 4-1/2" diameter185 HP with boston gear reducer62"(w) x 42" x 60" high2000 lbs.19https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef7ad43b780fe1b77662de0e2699f214/original-0021-e1503510512315.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9d5d2f2fe5eeab9667c5d0e2e4160f9/original-0101-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23ba1aa8b4a1c42973b53a5f4e69f88a/original-0111-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc1c166a2c04fc74f789f92e6847c331/original-012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1c2dcf9f33adc02279aadd6f16e0eb3/original-013-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92ea48eca25763befe773174c845ea60/original-0022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1a5ae958371ed5582349324c2b3b387/original-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e087bd4d19fcea25660199f5bfb402ae/original-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ef8c094fcb83b28a6442dd55770f2e9/original-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/143b8bbcc5d65367b183dde7d333b8c2/original-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca2ad9630f4e63a013030c2daa303388/original-0081-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cf62ab3839ecbd94b6d0f1c77ddb2ff/original-0091-1024x768.jpg2024-09-25 15:41:13 UTC6152268Scroll Down To See Video! All the G.B. F.LLI BERTONCELLO models of melting furnaces, mod. BETA static, mod. IDEAL with tilting crucible, mod. MINI - mod. DELTA - mod. LARRY - mod. ZEUS with vertical continuous casting, mod. LOGIC with horizontal continuous casting, have been designed by our engineers to achieve the best metallurgical quality on precious metal alloys melting process, with optional 1500°C melting temperature as required by some special alloys. Induction generator and inductor for programmable and independent heating of the die Laser detector to control presence of metal inside the die Oxygen-free melting chamber with in and out gas saturation. Double primary cooling circuit of the die, protection of the profile by gas saturation (argon or nitrogen) inside the die Additional cooling by direct water sprinkle on the profile exiting the die, water gathering tank made of stainless steel, complete with draining system Special sealing gasket shaped according to the profile section in use in order to avoid the leakage of water Connection set up to a suction system to eliminate eventual steam (at customer’s charge) Moving cutting system by hacksaw following the profile exiting the die Pneumatic vises to clamp the cutting unit to the profile in order to cut in motion Safety detectors to control the maximum length of the profile Last generation PLC and color touch screen. It is possible to save up to 100 recipes of melting and print at any time the working report Video camera with color display for remote supervision by the operator of the profile exiting the die Printer for data and set recipes Available Ex-Factory, ItalyWire, Plate & TubeMelting & Continuous CastingnewZeusPawtucket, RIhttps://www.goldmachinery.com/listings/6152268-new-goldpro-bertoncello-zeus-series-vertical-continuous-casting-induction-furnaceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3551aaa92e62facd48bd5d6984b0426a/original-Zeus_12_16_25_big-e1501600425923.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d7621c9ba144c5330539589a933af65/original-Zeus_Spec.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2cfffdd25ca1d273b7ef7b4162985014/original-zeus_123.jpg2025-02-03 14:06:03 UTC6152269Scroll Down To See Video! All the G.B. F.LLI BERTONCELLO models of melting furnaces, mod. BETA static, mod. IDEAL with tilting crucible, mod. MINI - mod. DELTA - mod. LARRY - mod. ZEUS with vertical continuous casting, mod. LOGIC with horizontal continuous casting, have been designed by our engineers to achieve the best metallurgical quality on precious metal alloys melting process, with optional 1500°C melting temperature as required by some special alloys. Perfect homogeneity of the alloys thanks to our Pulse Mixing System Excellent casting even with low carat alloys and difficult sections thanks to the powerful pulling system with four rollers High working speed thanks to the double cooling system of the die Easy and fast setting and control by visual display unit Certainty of maintaining the plant in good condition thanks to the self-diagnosing system and possible alarms with buzzer Protection of crucible and die by argon or hydrogen gas Protection of the melting chamber by aluminum casing easily and quickly removable to change the consumables Crucible, die and thermocouples quick change for short set-up time Pulling system with four rollers, stepper motor, closing and opening of the rollers with pneumatic control Quick melting and high speed withdrawal of the profiles New medium frequency generators Silent working plant Control of the working parameters by PLC and touch screen video, self-diagnosing and possible alarms with buzzer Deoxidizing chamber of the profiles Models & Specifications: Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks Model Delta 7 Starting At... € POR Model Delta 12 Starting At... € POR Packing & Fumigated Crate.... € 660.00Wire, Plate & TubeMelting & Continuous CastingnewDelta SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6152269-new-goldpro-bertoncello-delta-series-vertical-continuous-casting-induction-furnaceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f254579d64c372a8e12d76f1427b53d4/original-DELTA-7-forni-per-orafi-e1501602123139.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f0c36e437728f5fbc99cd21740be840/original-dela_specs.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97dcd89d46a37d248f31b731dcc0f49a/original-dela.jpg2024-09-25 15:41:00 UTC61522700220V/3PH/60HZ Equipped With: Foot Switch TAKEUPWire, Plate & TubeRolling Mills, Powerused2626-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152270-used-n-ferrara-2-hi-2-x-4-power-precision-rolling-mill-for-plate4"2"7" wide x 6-1/2" long8" long x 6" diameter32" x 34" x 50" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f45c2516f2d2a5b71a16b1ce012a1547/original-239-e1513887789217.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9904379a89482cbbf86a2b0595a1bb10/original-2391.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd35c6fa7e42cec895617795d8a57496/original-240.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b57a61f1360c5d6942c5344842ecdbe5/original-241.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88428c03ad77f821e17777ef47a0ca72/original-242.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc497a1542fdb43dc0c861458fc74982/original-243.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b89e8695e49b26e8e8b348604a5e4fcf/original-234.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79404848f7fbe3523c70ced6fc1f9051/original-235.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f0d518421cfe6bbfa19456dad9bebcd/original-236.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/929fd33b6fe8f61f4959ed8ee6b86ca4/original-237-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6913e021af080b2b46a2ac3996886c94/original-238.jpg2024-11-06 15:50:38 UTC6152271Scroll Down To See Video! This innovative continuous casting furnace has been designed to be friendly used by the operator. Moreover, it is convenient because unexpensive, and for the low cost of consumables. It is used by customers working with little quantities of precious metals and/or with various alloys but requiring high quality plates, wires and tubes. Thanks to the little dimensions, it can be easily placed in small laboratories or in reduced space. Perfect homogeneity of the alloys Protection of the melting chamber by aluminum casing easily and quickly removable to change the consumables. Crucible, die and thermocouples quick change for short set-up time. Double cooling system of the die. Pulling system with two rollers, stepper motor, manual closing and opening of the rollers. Quick melting and high speed withdrawal of the profiles. New medium frequency generators. Silent working plant. Control of the working parameters by PLC and touch screen video, self-diagnosing and possible alarms with buzzer. Models & Specifications: Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks Model Mini 5 Starting At... € 24,900.00 Optional Water Chiller ... € 4,500.00 Optional Hydraulic Shears ... € 2,750.00 Packing & Fumigated Crate.... € 660.00Wire, Plate & TubeMelting & Continuous CastingnewMini SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6152271-new-goldpro-bertoncello-mini-series-vertical-continuous-casting-induction-furnaceshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85fc2589b59cd755b4c430ed2c18ae7f/original-MINI-e1501601516552.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5983fa863f2df9c7c3268fc17f5941a3/original-mini_specs.jpg2024-09-25 15:41:00 UTC6152272kW Power PriceCompact Bench-Top System Microprocessor Control Easy and Quiet Operation Digital Power Adjustment Limit and Failure Diagnostic Lights Steel Frame Construction Furnace and Electronics Compartments are Completely Isolated Solid State IGBT Technology Available in 208/220V, or 380/400 3-Phase Power Double Wound Induction Coil for Enhanced Metal Stirring Ideal for Melting Gold, Silver, Copper and Brass Melt Times in the 15 Minute Range Four Models Available Technical Data: Prices: Price List – LC Series Bench-Top Lift and Pour and Tilt Furnaces Typically in Stock – if out of Stock 5-7 weeks Tilt Furnaces Delivery Time – 10-12 weeks Options and Crucibles: LC 4 Graphite Crucible...$ 65.00 LC 4 SIC Crucible...$ 115.00 LC 6 Graphite Crucible...$ 80.00 LC 10 Graphite Crucible...$ 85.00 LC 10 SIC Crucible...$ 125.00 LC 12 Graphite Crucible...$ 90.00 Infrared Pyrometer for LC15-LC125...$7,500.00 LC15 Silicon Carbide Crucible with Ceramic Container... $ 325.00 LC25 Silicon Carbide Crucible with Ceramic Container...$ 315.00 LC50 Silicon Carbide Crucible with Ceramic Container...$ 480.00 5 oz Graphite Ingot Molds – 1.187”x1.0”x0.5” H...$ 20.00 10 oz Graphite Ingot Molds – 1.985”x1.185”x0.5” H...$ 24.00 20 oz Graphite Ingot Molds – 1.98”x1.85”x0.625” H...$ 30.00 25 oz Graphite Ingot Molds – 2.437”x1.437”x0.75” H...$ 32.00 1 kg (35 oz) Graphite Ingot Molds – 2.75”x1.7”x0.75” H...$ 44.00 50 oz Graphite Ingot Molds – 3.75”x2.062”x0.75” H...$ 48.00 100 oz Graphite Ingot Molds – 5.5”x2.75”x0.75” H...$ 82.00 200 oz Graphite Ingot Molds – 6.5”x.3.75”x1.0” H...$ 180.00 250 oz Graphite Ingot Molds – 9.0”x.5.0”x1.25” H ...$ 350.00 400 oz Graphite Ingot Molds – 6.75”x.3.5”x2.0” H... $ 370.00 500 oz Graphite Ingot Molds – 8.5”x.3.5”x2.0” H...$ 395.00 1000 oz Graphite Ingot Molds – 13.0”x.5.0”x4.5” H... $1,300.00 50 oz Cast Iron Ingot Mold...$ 115.00 100 oz Cast Iron Ingot Mold...$ 125.00 500 oz Cast Iron Ingot Mold...$ 190.00 1000 oz Cast Iron Ingot Mold...$ 430.00 2000 oz Cast Iron Ingot Mold... $ 450.00 Ø3/8” x 18” Graphite Stirring Rods... $ 14.50 Ø1/2” x 24” Graphite Stirring Rods...$ 18.50 Boric Acid Flux (50 lb Bag)...$ 180.00 Closed Loop Water Circulators: Model 10 (for LC 4 System)... $1,100.00 Model 15 (for LC 6 System)... $1,850.00 Model 25 (for LC9 and 12 systems) ...$3,800.00 Water Cooling systems for Tilt Furnaces... call Availability: Ex-Factory, NJ Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeMelting & Continuous CastingnewlcmeltingPawtucket, RIhttps://www.goldmachinery.com/listings/6152272-new-goldpro-induction-melters4kg AU-18K 2 6kg Ag-0.925 6kg AU-18K 6kg Ag-0.925 10kg AU-18K 7kg Ag-0.925 12kg AU-18K 8kg Ag-0.9255kW 8kW 10kW 12kW28.25" W x 18.50" D x 17" H100 LbsSystems Require Water Cooling5.0 220 or 400V, 3-Phase $10,750.007.0 220 or 400V, 3-Phase $11,750.0010 220 or 400V, 3-Phase $14,900.0012 220 or 400V, 3 Phase $16,500.0015 kW 15 kg 18k Au 220 or 460V, 3-Phase $35,000.0025 kW 40 kg 18k Au 220 or 460V, 3-Phase $42,000.0050 kW 100 kg 18k Au 460V, 3-Phase $65,000.00125 kW 460V, 3-Phase $124,000.004/30/12$10,750.00220V, 3 Phase or 400V, 3 Phase 50/60 Hzhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5882a9a9c059ad539618f7e4d0ac2477/original-LC-Furnace-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4cdcaf218ab52c028529262fa8515bc/original-LC-Furnace-2.jpg2024-09-25 15:41:02 UTC6152273Approximate Roll Diameter - 4 " Approximate Roll Width - 1-1/2" Approximate Arbor Diameter - 1-3/4" Equipped With: Hi-Polished Chrome Finish Excellent conditionWire, Plate & TubeRolling Mills, Powerused8256-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152273-used-8256-150-chromed-wire-flattening-rolls-for-mgz-ls-rolling-millhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae6a31ea22691a2d95c61f1b8124261f/original-8256.jpg2024-09-25 15:41:08 UTC6152274Availability: Ex-Factory, Italy SF200IT45 (200mm Strip Rollers, normal and mirror finished) ....Price: € 34.500,00 SF2004T45 200+130mm (Mirror) Strip rollers with coilers) ....Price: € 43.500,00 Check the latest exchange rateWire, Plate & TubeNEW Goldpro® POWER ROLLING MILLSnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152274-new-cavallin-oam-goldpro-double-head-200mm-filly-series€ 34.000,00€ 35.000,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a09821c96964b9622f42bdadf017bdfc/original-200mm.png2024-09-25 15:41:08 UTC6152275Model F7900 Volts 240 /1 ph Hz 50/60 Amps 4.2 Watts 1000 S/N 749930802410 Barnstead/Thermolyne Made in USA Maximum temperature 1200°C (2192°F). Equipped With: Digital control single setpoint Compact benchtop muffle furnaces feature advanced electronic control Safety door interlock switch disconnects power to the heating elements whenever the door is open Two coil heating elements on chamber sides assure fast heat-up with minimum temperature gradient Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency 0.95cm (0.38 in.) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamberWire, Plate & TubeOvens / Furnaces / Dissociatorsused5306-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152275-used-5306-180-thermo-scientific-benchtop-muffle-furnace-barnstead-thermolyne-type-47900-2192-f15 x 13.7 x 10cm (6 x 5 x 4 in.)39 x 28.5 x 47cm (15.5 x 11.3 x 18.5 in.)18.5kg (41 lb.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d95703a627337bf0cfcd1ef419298319/original-IMG_4812-e1650459803745.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e562c0c19c341982221c9d3b5a8d58c3/original-IMG_4822-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1498529447bfbd1639e00343c217cb04/original-IMG_4812-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91ccdc91a71dc15da3e1ce818fddf945/original-IMG_4813-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9edb515066cb5b5000cef71674460541/original-IMG_4814-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8f170b0a6b23196718a3db80d4f89ab/original-IMG_4815-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7fc015eaf5ae940c2ebb17abf3e6369/original-IMG_4816-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a0eecff606700ff09ec2c18d993e5fe/original-IMG_4817-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b8c77f02690e72b31e457032c544411/original-IMG_4819-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc6bba6156a96bdc017d053332f872b2/original-IMG_4820-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9287bf74c50df332528f72182f3e45c7/original-IMG_4821-1024x768.jpg2024-09-25 15:41:17 UTC6152276Specifically developed for medium size laboratories with medium series Low noise Adjustable speed from 0 to 10 meters per minute Stable and ergonomic Powerful 4 HP Motor Rolling-mill of medium dimensions suitable for employments on medium-high production. Basic structure composite of cold painted steel . The modular structure of the mill gives to it stabili- ty and zero vibration. All of the non-painted parts are made with AISI. Rollers are entirely realized with special steel and with advanced thermic treatments, that give high hardness and dimensional stability. Rollers rotates on steel supports, with a 10 mm. bronze bearing hot mounted and centered individually. The bronze grants durability and precision to the final product. BEI’s rollers are insured for life. All of BEI electric’s mills have a self-lubrication system that maintains bearings always fully oiled . BEI’s mills also don’t need continued maintenance. Specifications: Ex-Factory, Italy Priced for... € 24.550,00 (packing additional)Wire, Plate & TubeRolling Mills, PowernewFED160Pawtucket, RIhttps://www.goldmachinery.com/listings/6152276-new-goldpro-cavallin-bei-160mm-double-side-power-rolling-mill-fed1606 Monthshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23f388dcff6385463408afa5deb69417/original-FED160-3-e1474979183699.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b80d5ee3dd7e07f29c164297205951eb/original-FED160-31-e1474979302288.jpeg2024-09-25 15:41:06 UTC6152278Wire, Plate & TubeNEW Goldpro® POWER ROLLING MILLSnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152278-new-cavallin-oam-goldpro-single-head-130mm-350mm-m-serieshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/244db2ed74f81306de6dfd9e7712bb78/original-mseries_1.png2024-09-25 15:41:08 UTC6152279The GoldPro® Rolling Mills of the L series have been specifically developed, and produced for large scale volume production breaking down environments of strip form materials. With a capacity to roll material from a starting thickness of 45mm and a strip width of 120mm, this rolling mill represents the most cost effective machine solution for these types of production applications. The user interface provides constant process information, as well as advanced alarm and diagnostics status. The machine contains fully automated semi-closed circuit lubrification and cooling circuits to guarantee both the longevity of the machines vital components, and the ambient laminating conditions. Electronic adjustment versions are available, where the laminating distance between the rolling surfaces is electronically operated by a simplified user control panel, with the machines’ advanced management systems controlled by an integrated PLC. The touchscreen display allows to store and manage recipes, to control and modify all the machine parameters Technical Data: Reduction ratio: 1:112 Supports lubrication system automatic, with oil recovery through gear pump equipped with distributor and pressure control Cooling system: through water, the system is equipped with a timer and temperature control device for the entry water Electrical system: the system is equipped of a numerical control - PLC - monitoring the main functions, motor, water and oil, signalling through visual/sonorous alarms any eventual anomalies (Electronic adjustment version). Availability: Ex-Factory, Italy Price: € 111,333.00 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeRolling Mills, PowernewSL250Pawtucket, RIhttps://www.goldmachinery.com/listings/6152279-new-goldpro-model-sl250ae-advanced-l-series-rolling-millkW 15Nm 10.000mm 45mm 0.35mm +/- 0.04mm 162mm 250Special steel hardened to 63-64 Hrc, roughness 0,8 Ram/min 8,2, reversibleSteel with brass bushings€ 1,000.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2449b807399f2074501c3ba9694c8a57/original-SL250.jpg2024-09-25 15:41:07 UTC6152280Gears: Made from case hardened high tensile alloy steel forgings Ring gear in hardened and tempered steel Tooth gearing is evaluated to give an optimum balance between tooth beam strength and maximum durability rating based on the dimensions of the gear set. The planet gears are crown shaved to give an ideal loading along the teeth , and are carried on needle rollers mounted on case hardened pins . Planetary carriers: Of high quality cast iron for strength and rigidity, to ensure equal tooth loading in the planetary gearing. SHAFTS: Made from case hardened tensile alloy steel to be more resistant to bending and torsion stresses and to maintain proper support and alignment of all gears even under the most critical loading conditions. HOUSINGS: The gearbox casing is of high duty cast iron for strength and rigidity.GROUP with motorized and programmable centring guide in according with your plate width. With this system is possible adjust the guide by brushless motor and save the position in a program. GROUP shearing machine: The hydraulic guillotine machine is in stand-by position during the working cycle and at the last step comes in working position for cut the plate at a programmable length. Technical Data: Steel Construction Rolls Caged in Normalized Steel Main Reduction Gear Type Planetary ROLLS support in steel with bronze bearing MOTORIZED upper roll movement with Brushless motor PNEUMATIC SYSTEM FOR INLET AND OUTLET PLATE FOR COMPLETELY AUTOMATIC WORKING CICLE, WHIT TOUCH SCREEN DISPLAY COOLING SYSTEM ON ROLLS LUBRIFICATION OF ROLLS SUPPORT IS FULL AUTOMATIC THROUGT MOTORISED PUMP AND INJECTORS. SAFETY DEVICES IN ACORDING WITH C.E. RULES ROLLS DIAMETER 180mm CYLINDERS WIDTH 250mm CHEMICAL COMPOSITION OF ROLLS: C=0,89 MN=0,42 SI=0,19 P=0,013 S=0,004 CR=1,87 MO=0,26 V=0,17 FORGED ROLLS WITH HEAT TREATMENT IN SPECIAL STEEL; EACH ROLLS WILL BE EQUIPPED WITH A CERTIFICATE OF QUALITY AND WORK ATTEST MAX WIDTH 80 mm MIN BEGINNING LENGHT 700 mm MIN BEGINNING LENGHT 700 mm MIN. THICKENESS 0,80mm ROLLS SPEED (ADJUSTABLE) from 0 to 20 m/minute MAIN MOTOR IN ALTERNATE CURRENT 25HP THEORETICAL WEIGHT 3300 KG INSTRUCTION MANUAL IN ENGLISH LANGUAGE Notes: INCLUDED WORKING PLANE IN HARDENED STEEL AND GRINDING ROLLER TABLE MOUNTED IN ALUMINIUM MAIN FRAME Availability: Ex-Factory, Italy Price: € 255.000,00 Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeRolling Mills, PowernewfamorH25Pawtucket, RIhttps://www.goldmachinery.com/listings/6152280-new-goldpro-180-mm-x-250-mm-automatic-breakdown-rolling-mill-complete-with-auto-feed-system-model-h25-sb-automatic-180mmx250HARDNED 66-67 HRC400V/50Hz8960mm x 1777mm (3527in x 700in)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e4cdcb244c4775a2909286b7ef83b1e/original-Famorh25.jpg2024-09-25 15:41:08 UTC6152281Code 058MTV2C….. 130MM ….. €3.050,00 Euros Code 058MTVC1…..130MM….€2.450,00 Euros Code 061MTV2C….100MM….€3.300,00 Euros Code 061MTV1C…..100MM….€2.280,00 Euros The two groups laminators are mounted on a sturdy and rigid steel base, thanks to which it is guaranteed the perfect interface aligned even during the rolling process. groups of rolling cylinders are equipped with stainless steel with high hardness, fit into the backs of aluminum alloy high strength, the cylinders rotate on special bushings which do not require lubrication. The lever movement, in the upper section allows to set the distance between the laminating cylinders and consequently the thickness of lamination, the displacement performed can be verified by the graduated disc placed on the toothed wheels of command, keyed on the feed screws of the cylinders themselves. The rolling motion is provided by a worm gear motor power of 1.1 kw mounted in a central position between the two groups of rolling. By means of the inverter mounted on board of the machine it is possible to adjust the speed of production from 0 to 5.1 meters per minute. Available Ex-Factory, Italy 30 Working Days Lead TimeWire, Plate & TubeNEW Goldpro® POWER ROLLING MILLSnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152281-new-goldpro-bei-100mm-130mm-double-side-power-rolling-millhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52a5f21148964a315a9a93c10ee858eb/original-15.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9f40cd57d6874e6d4fd5d9b0f41c0f5/original-23.png2024-09-25 15:41:08 UTC61522821983208V/3PH /( 50-60HZ ) S/N 538/83 Operating temp is from 0 to 900 degrees C. Equipped With: Pneumatic quench dump control Pneumatic reversing control Less TankWire, Plate & TubeOvens / Furnaces / Dissociatorsused0536-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152282-used-0536-180-fioa-quench-annealing-furnace-model-1v-2-self-contained-ammonia-dissociator5" h x 8" w x 4" d13" wide x 6" high41" (L) x 26"(W)93" x 27" x 69" high1700 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd13182356e45454df3f69a874af8973/original-new-0142-e1397649391292.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f25c83e81ff8aa043e8eac90aa66b9ae/original-new-0101-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9dfe5fe164af5367170b78f1f425a94a/original-new-0112-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34bd1ece1d5b4a8e4f248c8445f6f886/original-new-013-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b195de7abc437fd3fe1ddb634367f741/original-new-0143-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71d7ef14b5b2742b086f57cb8ef0704f/original-new-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0fe6aa94fba7c20868d3b2ab75d9aa2/original-new-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/485bd4696e83b9bf5c3cda66518e7122/original-new-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfcd2764e05dd9326bc6e8a3ff1fb7bc/original-new-0061-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39a3ef51321fe870702e99b804713572/original-new-0071-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cb466674625e9d19e35424d3811599c/original-new-0082-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc4cd1eed88cbad73490739d8b30240d/original-new-0091-768x1024.jpg2024-09-25 15:41:19 UTC6152283Offered As is - Less Pilot / controlWire, Plate & TubeOvens / Furnaces / Dissociatorsused2167-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152283-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln30" x 30" x 41" high26" x 25" x 17" high22" x 17" high1000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f573f7627ba17cffd4d871c030ae32e0/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84c8b54b1ba97c0ab59ec91958c0c51f/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d3e657e70873a06d4affcd2e8a5e762/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a41e6d7b3f90e947a4aedfb38d865036/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/865bca1b9196ce87c4a55e8cf6945ef8/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e5fbd781cfad8b1ad2f226e13d75607/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d6b2a04b1b785a2ab1ea5c80b13a486/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f2748ca1b5d94bf579c980070fca5e0/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a13b3dce31246b525bf725f5a95df0a9/original-used-2167-180-ls-gas-fired-casting-burnout-buzzer-type-furnace-oven-kiln.jpg2025-09-03 14:40:50 UTC6152284GB BertoncelloIdeal 16/25/50SEE PDF BELOW FOR FULL SPECIFICATIONS Induction furnaces with motorized tilting of the crucible with adjustable speed, conceived for many uses like melting scraps for refining, melting ashes for recovery, gaining for alloys production, etc. ADVANTAGES - Silent working - High performing medium frequency induction generators - Steel frame - Perfect homogeneity of carat alloys - Quick melting - Tilting system by motorized linear actuators for the pouring movement with speed electronic control and joystick lever - Easy control of the working parameters by PLC and touch screen video, with temperature control by thermocouple - Monitor display for self-diagnosing and possible alarms with buzzer - Possibility to save the working recipes and parameters - Programmed maintenance with display warning - Crucible with ceramic casingWire, Plate & TubeMelting & Continuous CastingnewIDEAL SeriesItalyhttps://www.goldmachinery.com/listings/6152284-new-goldpro-bertoncello-ideal-series-induction-melting-furnaces-with-motorized-tilting18kW to 30Kw1480cm3 to 3345cm31500 Degrees C20Kg to 50Kg16Kg to 40Kg11Kg to 27Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a3169e0e7942ac971b9ebf586d5f151/original-IDEAL-25-e1518093083366.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f26182a25af20388820f24b3483f8a2c/original-IDEAL-25_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffb317423ab473c83c674d4c0faf1982/original-ideal_specs.jpg2024-11-19 15:03:46 UTC6152288Model Number ML 400 Breakdown Rolling Mill with a medium-sized reversible duo scheme for the produtciont of plates with millimeter thickness. A suitable machine for the production of large quantities of material with good dimensional and surface finish of the plate. This machine has full structure in electro-welded and painted steel. The rolling cage has monobloc steel posts, hardened, ground threaded adjusting screws houses in bronze ring nuts. Water cooling of the cylinder body by a controlled solenoid valve and rotating joints. Main motor with two body gearbox. Controls on a rotating keypad with a display. Available Ex-Factory, Italy PRICE UPON REQUESTWire, Plate & TubeRolling Mills, PowernewML400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152288-new-cavallin-goldpro-ml400-breakdown-rolling-mill-for-plate400MM350MM45MM11kW5.2 daNm5.2 m/min2950MM x 800MM x 2000MM3100 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07eeaf6478406ab309b7b78b39e28e7c/original-9_ML400-e1595516967631.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11bd73a1568b58cf8355d4ca00de8c8e/original-9_ML4002.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56d3214e7de94909c8d11401c91b3ec3/original-9_ML4003.jpeg2024-09-25 15:41:02 UTC61522890Scroll Down To See Video! 230V/3PH/60HZ Hand operated screw downs Equipped With: 6" Wide Take-up and Pay Off Start/stop/run/jog control on front Start/stop/run control on rear Manual screw downs Material guides Forward and reversing controlsWire, Plate & TubeRolling Mills, Powerused1265-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152289-used-n-ferrara-6-x-8-4-hi-precision-rolling-mill-for-plate6" diameter x 8" wide1-3/4" diameter x 8" wide15 HP64" x 50" x 68" high3,000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e235c794f202b2863e7be08a9195a8d/original-13-e1437738837302.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f778931e982e5fd211eefafbef08e74/original-14-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23c1726313c881a54dd07be3638d3687/original-next-010-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff4e90785509dad7df1b04f5ed67f81d/original-next-0122-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c1003766734b83a61df177605184ed1/original-next-0131-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/084547d12af84d1b02dd96c1c397d5be/original-next-0141-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b826eaa2b796174c3986ec09491e6b61/original-next-0151-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1171887b3f9cbf36fe839453c9e000b5/original-next-016-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/910c97c25245ce6e5b5bc10000e38f64/original-next-017-768x1024.jpg2024-11-06 15:51:04 UTC6152290OPERATING VOLTAGE 208 3PH/60HZ YEAR OF MFG 1997 MAX OPERATING TEMP (UPPER CHAMBER )2300 DEG F MAX OPERATING TEMP (LOWER CHAMBER ) 1200 DEG F WORK CHAMBER SIZE (BOTH CHAMBERS 9"H 10"W 19"D POWER (RETORT CHAMBER 7W POWER (DRAW CHAMBER) 7W FLOOR TO HEARTH (UPPER CHAMBER 48" FLOOR TO HEARTH 9DRAW CHAMBER 27" APPROX OVERALL SIZE 80"H 33"W 45"D Equipped With: PORTABLE QUENCH TANK 2 HONEYWELL UDC2000 DIGITAL TIMER AND TEMPERATURE CONTROLS ORIGINAL OWNERS MANUALS ORIGINAL OWNERS INVOICEWire, Plate & TubeOvens / Furnaces / Dissociatorsused5290-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152290-used-5290-180-electra-series-h-d-arr4-model-91019-dual-chamber-heat-treat-furnace-with-quench-tankhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/619333323e9affa4b3b5c61accbe487f/original-IMG_0476-e1701182293867.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4e1f16b7e2918a043069e33c1021a40/original-IMG_0481-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfedc834273a57ede6d85e01bc5bc20d/original-IMG_0482-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ebd12565b38021427f4421ecb87f989/original-IMG_0483-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58fff449a0b29c7306f6af71d38bf729/original-IMG_0484-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f2cd02f13885ce19d1e18f3e2f31626/original-IMG_0485-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee45a2a8f1abbbd94c6ccfee32625909/original-IMG_0486-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58207a6e2324daa8da51681ca95813b0/original-IMG_0494-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/826ba0069c89974331c057b22d13d446/original-IMG_0495-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee378667986b85f9c8f709e7a37da759/original-IMG_0496-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49fb47f6a4e27fa57d262c538adc89e0/original-IMG_0497-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57fdd24dba5cece4506501c02845948b/original-IMG_0476-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f43481735e0b350e0bdb1a36fcd8ea3/original-IMG_0477-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7e583a6c122e54794dfc1032d5bc1a0/original-IMG_0478-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0402f51bfc5c59b6ceda5e7e1fada22/original-IMG_0479-768x1024.jpg2024-09-25 15:41:16 UTC6152291220-380V/3PH/50HZ Equipped With: Machine mounted material take-up Material pay off arm Hand operated roll adjustment Manual hand wheel jog Additional slitting tools as photographedWire, Plate & TubeSlitters/Shearsused0676-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152291-used-0676-200-tieche-motorized-multi-slitter-with-additional-slitting-tools2"6"51-3/8"41/4"1.5 HP, 1400 RPM5.4/ 3.140" x 36" x 59" high2000 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/148af551d05cd71c8c8db43f844bd5e6/original-new-0291-e1405512891148.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d32f573a69b7c520c332510def792a7/original-new-037-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab4d0a177a3754d7c5829da2d94c65ec/original-new-039-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b9663885a427fcdcae6230f2a64d767/original-new-041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9a54d862b67468ad30c6708ba1da4a6/original-new-042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77d874ba0c0d135128add496916d5745/original-new-044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb67d5ff35daf136f41feed9594243cd/original-new-045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8539792c80a4e111e01639899ad8a8f/original-new-0292-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/875aca8368ee3569cf9a09bb7588e16c/original-new-0301-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5396a121546b31a4e365849b916a9145/original-new-0311-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89a38da77df000020b80a64668512491/original-new-032-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3217e55ebb128e0c51101074d8a7be59/original-new-033-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e27d2745da99416d6e71aea15616b56/original-new-034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33b1791265f1a921fceae285bccee5c0/original-new-035-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5bf7c86092e4d99ab3edba32606558d/original-new-036-1024x768.jpg2024-09-25 15:41:23 UTC6152292Max Temp: 800°C - it can reach 900°C as a peak temperature only NOT for continual useWire, Plate & TubeOvens / Furnaces / Dissociatorsused9836-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152292-used-9836-italimpianti-model-fd-a-quench-annealing-furnace11KW380 volt ,3ph,50/60hz300 X 150 MM600 MM1100 X 2300 X 1900 MM660 KGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94d011c11da67f4e63438402efe34953/original-1-4-e1652194926459.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd8f5e652833917ad4b1df388c6633e0/original-2-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d81389800f7f3b05619e96f735750118/original-3-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09ad2205152c9a201034f25c9008dc4b/original-IMG_5028-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0185bc67b63090bbfcff80862f5ef9da/original-IMG_5029-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7beecce96dd7307cd4d7c2f4c4e20f8b/original-IMG_5033-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c39b413368556b950ecefcf2c5d3088d/original-IMG_5034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22eda05c496a121acf84c717e6cd1bd9/original-IMG_5035-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f65706d1328d6434f553dc34bf2696fd/original-1-11-1024x768.jpg2024-09-25 15:41:17 UTC61522930Scroll Down To See Video! Model N.Ferrara 4 Hi 208-230 Volts / 3ph / 60hz 15 HP Diameter of rolls 5" Length of rolls 8" Length of work rolls 8" Overall size 64" x 50" x 68"H Equipped With: Takeup (2) Emergency stop controls Start / stop / jog push buttons Manual Screw DownWire, Plate & TubeRolling Mills, Powerused8879-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152293-used-n-ferrara-4-hi-5-x-8-rolling-mill2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a9da71bef6a3d6d081581bb195009e4/original-8879-002-768x1024-e1556117252707.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d8c60dbec0a20c03423938c4f35e26f/original-ferrara-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/826027fb7efcb77a3791f201d7c26406/original-ferrara-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdd027da39efc8e5ac752129972e6b73/original-ferrara-0021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e36cd827768cbe7e441de3341dbec921/original-ferrara-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1485fb3b2b2c8f726577e4dcf2e8d5ab/original-ferrara-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/190b582cc455a69f94f3334f2d6e6e6d/original-ferrara-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54350eddaed4cf7dd17b2697342185ae/original-ferrara-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1fb294e44dfdf91dbc91e46c3bf4236/original-8879-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/069da2a878a2d823f46ed482727fac22/original-8879-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7276d85d9683ca2c597c8df892556a59/original-8879-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/640ef4b7609d4bd2353685b506cf94d0/original-8879-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/173f0f4889e58c07c13bef36407a567f/original-8879-004-1024x768.jpg2024-11-06 15:51:20 UTC61522951980SM-32S MINI-MAXOffered As-Is, for Rebuild or Parts Category temperature / humidity chamber. Environmental temperature / Humidity chamber Chamber internal workspace dimensions: 38 x 38 x 38 inches (97 x 97 x 97 centimeters). WEIGHT 1,975lbs. DIMENSIONS 53"W x 68" D x 90" H Equipped With: Thermotron 2800 Programmer / Controller Therm-Alarm-Over and Under Temperature Protection Stainless Steel Interior Viewing Window Interior Light Heavy duty CastorsWire, Plate & TubeOvens / Furnaces / Dissociatorsused5309-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152295-used-5309-180-thermotron-sm-32s-mini-max-environmental-termperature-humidity-chamber230 VAC, 3 Phase, 60 Hz, 50/32 A20-95%RH35~180°F32 cu fthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90c53e5ce1bdc349d6187b16351864a3/original-IMG_4212-1-e1650654220681.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4afe407373c23593fdd1b1361640115/original-IMG_4210-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1fb925aae16d22a88b5bd3ccf56b87b0/original-IMG_4213-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68d5351c6909b3d98a6b8527f88576b5/original-IMG_4214-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0d7436577b1da5769b5e2041e332a62/original-IMG_4217-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68cb346dac44af1e5b284f7a97063bc6/original-1-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea449567196ee199a417f1ce6a948b5a/original-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c9dfd435003c6cfff667d474260fd1e/original-3-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebb15716d585751589d0c206884674fb/original-4-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/887396b250fefb8219e580178bdf0866/original-IMG_4206-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05c5822ee0ab6054690a49948ff4b408/original-IMG_4207-768x1024.jpg2024-09-25 15:41:17 UTC6152296220 volt 3 ph 60HZ 175 CFI capacity Model GAD175E Temp. 1750 Degrees F S/N 7805P14AD Overall size 40" x 36" x 48" H Est. Weight 765 LBS Equipped With: Analog control Electrically heated - heating chamber Circuit breaker Dissociated Ammonia is a dry, reducing, oxygen-free gas mixture with a composition of 75% Hydrogen and 25% Nitrogen, by volume. It is a gas with considerable reducing constituents, low dewpoint, virtually no impurities and thus capable of preventing oxidation of the most vulnerable materials at elevated temperatures, such as stainless steel. It is obtained by cracking anhydrous ammonia vapor in a catalyst filled vessel maintained at a temperature of 1700°F to 1850°F. The reactant ammonia is stored as a pressurized liquid in a tank or cylinder. It is drawn from the tank above the liquid-vapor interface to assure that anhydrous ammonia vapor is supplied to the dissociator. The dissociator is provided with catalyst filled heat resisting alloy retorts. The retorts are mounted within the insulated dissociator heating chamber. Incoming ammonia pressure is reduced to 8 to 10 psig before retort entry. At the outlet of the retort the hot dissociated ammonia passes through a dry cooler where the gas is cooled to near room temperature. It then passes through a flowmeter and on to the consuming device. The high limit temperature control will terminate thermal input to protect the dissociator from damage caused by an overtemperature condition if the chamber temperature exceeds the limit setpoint. The low limit temperature controller will prevent inlet ammonia flow from entering the retort until the limit setpoint has been exceeded. A pressure reducing regulator will be provided in the ammonia vapor delivery line along with overpressure relief controls. A backpressure control regulator will be provided in the dissociated ammonia outlet line.Wire, Plate & TubeOvens / Furnaces / Dissociatorsused3447-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152296-used-3447-180-sargeant-wilbur-furnace-ammonia-dissociator-175-cfihttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1413e77214292f9d8628ff204def8e8d/original-1-16-e1585153891650.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cab0c819d3f992bbd2074373e84abea3/original-1-17-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6a2e6f0e3287c18d4a04416e87cbdca/original-2-8-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c9f00f65327235a4f2f6ac1060860fb/original-3-8-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8452ba85b44b9ceca7e80457ea0ac44/original-4-8-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab422318adc309ce49fd7c987b14e78f/original-5-6-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f9ab936856bdbb9d681263af30a8b5b/original-6-6-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a692db6a5b9d26b98f9abaf9916375b/original-7-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb4d84d354a80296c539c43cee2ca673/original-8-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd444da572ffe8bf6cd51875023e6693/original-9-768x1024.jpg2024-09-25 15:41:17 UTC61522971994The machine is currently set up for 2.5 inch wide flat stock Max capacity of furnace is 5.5 inch wide flat stock---Power Draw roll and wire guide replacement / upgrade required to acchive 220V/3PH/60HZ Chamber entrance opening size 3.5" w Chamber exit opening 6" w Power Draw roll size 2-1/2" Dart micro drive 90DC motor: 1/12 HP, 23.5 RPM Torque: 102 inch lbs. Estimated weight 1670 LBS Equipped With: Power Draw rolls Dual Honeywell digital controls for furnace and dissociator CBC-200 clutch brake analog speed control Ammonia dissociator: S/N: 94-200ADT-CS-03 Start up and shut down instructionsWire, Plate & TubeOvens / Furnaces / Dissociatorsused2721-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152297-used-2721-180-sm-engineering-inclined-quench-flat-stock-annealing-furnace94-IT-11.5-ESAFWQ-CS-03150 IPM1/2" thick x 23" long90" x 42" x 71" high42" x 16" x 11-1/4" deephttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e42eb5a214e0fa56e83faf921d10e29a/original-20A-Furnace-SM-Engineering-3-e1525371478472.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b188003601f6c8b30b921e18976a61d3/original-1-12.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a60bc5f4c033a47faec7dc8f03e5908/original-2-3-1024x665.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98a8676960493a320d2bf703abd810c5/original-3-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2324f78e301f8b652376e341cef5bad9/original-4-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0321b7719317f34ebdb2abdf0cf78663/original-6-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c68caf2950022d79855e03f9a8af0fad/original-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7639dec179f3e10b3c4aa4f16532bd8c/original-8-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/012a1ee29c691a06e72cf2d1a6c5e40a/original-IMG_9526-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acfe65c4a26e58d97c26b331835dfc50/original-IMG_9529-1-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cddbdb148f549807ff7f990ea872bde3/original-IMG_9535-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aacd73f6979d04a0d0ae0c0a5321ddf3/original-IMG_9539-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45ea3e8a4b4cd6eff5e8a13a0d223b74/original-IMG_9540-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95218168b1cdfe85fc3bfaf68581a561/original-IMG_9542-1-1024x768.jpg2024-09-25 15:41:19 UTC6152299Model Number BL 400 Breakdown Rolling Mill with a medium-sized reversible duo scheme for the produtciont of plates with millimeter thickness. A suitable machine for the production of large quantities of material with good dimensional and surface finish of the plate. This machine has full structure in electro-welded and painted steel. The rolling cage has monobloc steel posts, hardened, ground threaded adjusting screws houses in bronze ring nuts. Water cooling of the cylinder body by a controlled solenoid valve and rotating joints. Main motor with two body gearbox. Controls on a rotating keypad with a display. Available Ex-Factory, Italy PRICE UPON REQUESTWire, Plate & TubeRolling Mills, PowernewBL300Pawtucket, RIhttps://www.goldmachinery.com/listings/6152299-new-cavallin-goldpro-bl300-breakdown-rolling-mill-for-plate300-500MM300MM60MM15kW0-9.9 m/min4200MM x 1700MM x 2300MM6900 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/564f39e7a0479ef1b36ca65ffc1dbbec/original-10_BL300-e1595517716990.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/007236b2abba2bc4fa7cfed3514bdf86/original-10_BL3002.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edcf2c670a7b0cdd18bdb084cbee7825/original-10_BL3003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/177eee939cb349f36bc23f2de5c769bc/original-4.jpeg2024-09-25 15:41:02 UTC6152300Equipped With: Digital timer Used to expose silk screensWire, Plate & TubeOvens / Furnaces / Dissociatorsused7982-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152300-used-7982-180-autolight-sr-vacuum-exposure-unit-type-fu1b-s-n-66-724225" x 18"27" x 24" x 12" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8884d58d162a8f4f4aceba8c539e5edd/original-7982.jpg2024-09-25 15:41:13 UTC6152301Electrical - 120 volt,1Ph ,60 Hz Capacity With P3 Crucible - Approximately 2 Lbs Silver 999 or 3.5Lbs 14kt Maximum temperature - 2050 degrees F Thermocouple Controlled Temperature Approximate Size -20"x10" x15" Hi Shipping Weight - 60 Lbs Equipped With: Digital Controls Thermocouple Cover Interlock Safety Switch - Prevents The Operator From Electrical Shock Should Contact Be Made With The Heating Elements While Removing The Crucible. Available Accessories Priced Separately : (1) #4-0000 Clay Crucible 2-3/4" dia x 3" tall .............................$63.00 each (1) P-3 Standard Clay Crucible 2-3/4" dia x 5-1/4" tall..............$49.00 each (1) #4-0000 Lifting Tong (Also Used With P-3 Crucibles) .........$159.00 (1) #380 Adjustable Face Shield ............................................... $44.00 (1) Aluminized Thermonol Apron, 24" x 39"................................$53.00 (1) 18" Textoglass Gloves, Elbow Length...................................$48.00 Pr (1) Textoglass Leggings, Spring Loaded.....................................$113.00 Pr Additional Photos: Availability: Ex-Factory, USA Price: $2995.00 Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeMelting & Continuous CastingnewE40Pawtucket, RIhttps://www.goldmachinery.com/listings/6152301-new-goldpro-model-e40-electric-bench-top-melter-w-available-accessorieshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27bb8a2c89abefb4c11af69c994d89e9/original-e40.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6d168051a09c8f1a3288ec57b5829d2/original-e40-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac3ef992a61febb31cc96941accc2d37/original-e40-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4df2ec08ead7c8bea243eaab71e2cf4/original-e40-1.jpg2024-09-25 15:41:01 UTC615230211450.0Motorized machine complet of support bank, entirely made in steel for cutting plates up to 1,5 mm thickness. The solid structure and the particular technical solution confer to the machine characteristic of high precision, stability and big versatility. It has a support plan with micrometric regulation through a joystick and visual display with direct reading of nonius for giving to the machine high cutting precision. The shears diam. 90 made in special steel for giving to the shear much resistance to the usage. Adjustable width from 4 to 90 mm. Reversing. March with pedal. Installed horse power on Motor-reducer CV 1,5 with motor protector and fusibles. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 600 mm Width 350 mm Height 1050 mm Approx. Weight 130 kg Options Plate winding device € 1.960,00 Unplate device € 850,00 Electronic variation of cutting speed € 1.700,00 Complete set of four spare blades for shearing machine CR/9 CR/9 € 1.715,00 Frictioned downcoiler € 1.604,00 Drivers with rubber cover in two parts (width to establish each) € 506,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcr-9Pawtucket, RIhttps://www.goldmachinery.com/listings/6152302-new-tvn-mod-cr-9-registable-shearing-machine-1-5mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/121fba2be8c7859a95c2d747757a0bf5/original-cr-9.jpg2024-09-25 15:41:16 UTC61523031989220V/1PH/60HZ 6 - adjustable tube reducing stations Adjustable infeed With precision auto arc, Model 50A TIG seam Welder Equipped With: Payoff spool holder Analong speed controlWire, Plate & TubeWire & Tube Makingused2466-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152303-used-2466-140-n-ferrara-tube-forming-machine-with-welder-model-056-07-tube4"7mm73" x 25" x 47" high1200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3374b9ef3fb2ec178a2ba4f5dfc3981/original-15-e1490621776543.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf2b125ac96732ee3ccb00b7ad20bc7f/original-16-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a15cbfc3400ff2cf392cdf44f92c91a0/original-0391-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/999c1b771aab4de3ba64089ceebccc13/original-0451-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e80385dbf2908efd484cf24930098129/original-0491-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fae0b9d20c9f5ab67175938c08e04487/original-050-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/420c25fa3c5db3eb8291ed8a09b30a4e/original-051-768x1024.jpg2024-09-25 15:41:23 UTC615230467275000.0The TT1200 combines the well established quad roller concept with advanced machine control technology to provide a machine capable of unsurpassed levels of Precision for Strip Finishing applications. Extensive analysis has proven that highest levels of finished results can be obtained only by employing the unique four high roller system with intelligent, sensitive and flexible material handling systems. Integrating all of the necessary elements of control the working material though the rolling process, the TT1200 offers unrivalled levels of performance and precision, whilst at the same time maintaining a simplistic HMI. The working material is managed by electronically user controllable semi automated feed and collection units, to ensure the correct levels of material stress and strain particularly when working materials of less than 50 microns. Material rolling thicknesses from 3 mm to 30 microns, with 2 micron tolerances are readily attainable and under the correct ambient and material conditions, final results of less than 5 microns thickness can be obtained. Dependent upon material conditions, initial single pass reduction of over 50% is possible, demonstrating the truly versatile and flexible nature of this machine. Automated open circuit oil lubrication and closed water cooling circuit, are combined to maintain and guarantee the rolling surfaces and all critical components, in order to maximize finished results for an extended machine lifecycle. A user selectable semi-closed circuit material oil circulation and recovery circuit, as well as a series of optional elements, are provided for to enhance and dedicate the machine for each individual customer application. Quick Release Spools are fitted to the coiling Units as standard to facilitate both start up, and final material transport from the rolling mill. Coiling Covers are available as an order option to protect working materials, with integrated machine auto stop providing additional security. Oil / Air Spray is available as an enhanced order option to replace the standard “drip” type oil circuit. Provided with electronically configured user controls to enhance in process lubrification and working material cooling. Material Breakage detection using a system of intelligent sensors is supplied as standard, to ensure full and automatic machine shut down in the event of material breakage. Cleaning blocks are optionally available, with natural fibre pads for lock down to remove surplus oil. Material Guides can be provided as an option for applications where there is a risk of excess material bow Material Thickness Measurement is available as an additional option providing on line dynamic display. The standard machine provides an indication of the cylinder positions. Technical Data: Electrical – As Requested Recommended Strip Width Range – 10 /50 MM Approximate Strip Thickness Range 3mm to 30 Microns Roll Width – 120 mm Work Roll Diameter – 45 mm Support Roll Diameter – 148 mm Approx Dimensions: 4′ 8″ DEEP x 5′ 8″ WIDE x 6′ HIGH 1435MM DEEP x 1750MM WIDE x 1850mm HIGH Equipped With: Digital Controls Quick Release Coil Spools Powered Strip Coiling Units Integrated Cleaning Blocks (Optional) Integrated Coiling Covers (Optional) Spare Work Roll Sets (Optional)€ 2,080.00 Notes: Supplied as three phase 400V 50Hz, and full compliance to CEIEN60204-1 Cylindes: Standard, Hard Steel to 62-64 Hrc (Deviation less than 01 ­m) On Request, Mirror Finished, Chrome plated or DLC Material providing hardness to 78Hc Availability: Ex-Factory, Italy Plus PackingWire, Plate & TubeNEW Goldpro® POWER ROLLING MILLSnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152304-new-cavallin-oam-goldpro-model-tetra-tt1200-quad-4hi-ultra-precision-strip-rolling-mill-for-thin-metal-strip-thickness-reduction-elhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a58cbc22c44851e43f27e0b48376f8e9/original-tt1200.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b8e54cbfe03e0b75f478c501e069180/original-1.png2024-09-25 15:41:08 UTC61523054095.0This machine can shear plates up to 1 mm thick, with high precision on the width. The available space for shearing is 120 mm, scrap cutter included. The possibility to replace the shearing blades group holder with scrap cutter assure a great versatility of the machine. The shears diameter is 83,5 mm. The plate is drawn by special rubber spacers. Cutting speed 6 meters per minute. Installed horse power 0,56 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 650 mm Width 400 mm Height 1100 mm Approx. Weight 180 kg Optional: Frictioned downcoiler (seperator plates diameter 26mm), € 1.792,00 Uncoiler, € 819,00 Electronic variation of cutting speed, € 1.250,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcp-8Pawtucket, RIhttps://www.goldmachinery.com/listings/6152305-new-tvn-sheering-machine-mod-cp-8-multiple-cuts-circular-shearing-machine-1mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2857bcacc7659c62cef7f627c1acca4a/original-cp-8.jpg2024-09-25 15:41:16 UTC6152306This machine allows the decorations of tubes and wire of different diameters, with a large choice of patterns and designs. Very simple to use: first insert the tube or wire in the spindle, then adjust knurling tool pressure by hand according to the diameter of the tube and depth of required design. ROL/1 Tube desk-top knurling machine ROL/2 Tube knurling machine on bench ROL/3 Tube knurling machine on bench for tube and wire TECHINICAL DETAILS ROL 1 with one tooling, 10.750€ ROL 2 with one tooling, 11.200€ ROL 3 with one tooling and two spools for wire, 15.600€ Complete tooling standard holder and roller....€ 910,00 Ex-Works, Italy Delivery 60 days *Pricing updated 9/7/18 subject to changeWire, Plate & TubeWire & Tube MakingusedM10Pawtucket, RIhttps://www.goldmachinery.com/listings/6152306-used-goldpro-m10-motorized-knurling-machineKw 0,4 0,4 0,5V 230/400 220 220Hz 50/60 50/60 50/60mm 480 1200 1200mm 330 660 1120mm 500 520 550Kg 38 130 180mm 0,8/12 0,8/12 0,8/12https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d3f6787754397bf1be7daba8726925d/original-mandrino-motorizzato-952x1024-e1432725740976.jpg2024-09-25 15:41:19 UTC61523077831.0This machine can shear plates up to 3 mm thick, with high precision on the width. The available space for shearing is 200 mm, scrap cutter included. The possibility to replace the shearing blades group holder with scrap cutter assure a great versatility of the machine. The shears diameter is 130 mm. The plate is drawn by special rubber spacers. Cutting speed 5 meters per minute. Installed horse power 1.5 INV. Power supply 380 V. 50 HZ Three-Phase. Dimensions: Length 850 mm Width 530 mm Height 1150 mm Approx. Weight 280 kg Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcp-13Pawtucket, RIhttps://www.goldmachinery.com/listings/6152307-new-tvn-mod-cp-13-multiple-cuts-circular-shearing-machine-3mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fadb4059be55b5b420b4145c17372213/original-cp-13.jpg2024-09-25 15:41:16 UTC615230828037.0This machine can shear plates up to 4 mm thick, with high precision on the width. The available space for shearing is 250 mm, scrap shears included. The possibility to replace the shearing blades group holder with scrap shears assure a great versatility of the machine. The shears diameter is 220 mm. The plate is drawn by special rubber spacers. Cutting speed 11 meters per minute. Construction standards in accordance to "CE" with respective documentation. Installed horse power 3 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 1210 mm Width 500 mm Height 1550 mm Nr 1 plate-cut € 1.322,00 Nr 2 plate-cut € 2.645,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcp-22Pawtucket, RIhttps://www.goldmachinery.com/listings/6152308-new-tvn-mod-cp-22-multiple-cuts-circular-shearing-machine-4mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0e8131b21c9fd07587cc71b4549bdfe/original-cp-22.jpg2024-09-25 15:41:16 UTC6152309Foot pedal operated Voltage 220/440 3ph 60 Hz Overall Table size 10" By 6"w. Roll diameter 4" Max slitting length 6" Arbor diameter 1" Overall size 50"x 36" x 65" Estimated weight 126 Lbs Equipped With: Payoff and take up system Heavy duty metal standWire, Plate & TubeSlitters/Shearsused5311-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152309-used-5311-200-standard-model-2-power-metal-slitter-slitting-machine-w-take-up-pay-offhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99e7740eff8c14346cefbd9850bc31cf/original-IMG_4853-1-e1650655059155.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/329b24a04e5e3955f507b657204bef78/original-IMG_4859-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/122975ba8977fab6a61e2d9ba48d43fb/original-IMG_4853-1-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2618a093c75f9ed977e83d20687ce3c/original-IMG_4854-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7f45e7dd4b825e13322ba04487c3a5f/original-IMG_4855-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f021d2a53669ff0b55decdc566ba4b9/original-IMG_4856-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58ccc3824d300d60bdd89a923184421b/original-IMG_4857-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/450ace9ce4b5abebcff592c3d7383209/original-IMG_4858-1.jpg2024-09-25 15:41:17 UTC6152310Scroll Down To See Video! The horizontal continuous casting furnace LOGIC, with induction heating system, has been conceived to produce wires, plates, tubes and customized special sections. It is used for semi-finished products in precious alloys, in the mint industry, in the watch industry, in the dental industry and in the jewellery manufacturing in general. The alloys normally used are: Fine gold AU 999.9 Fine silver AG 999.9 Alloys of gold-silver and copper and other Silver alloys in AG 925 - AG 800 - AG 500 Alloys for the watch industry Alloys in gold-palladium and dental alloys Soldering alloys in silver-copper, silver-zinc-copper and other. ADVANTAGES Crucible and die heated by two generators and two inductors, with independent regulation of power and temperature Maximum safety thanks to the horizontal withdrawal of the material High working speed thanks to the special cooling system of the die Homogeneity of the metal structure thanks to the secondary cooling system by direct water contact on the profile. High quality standard thanks to the powerful pulling system Certainty of maintaining the plant in good condition thanks to the self-diagnosing system and possible alarms with buzzer Possibility of placing in complete safety the pre-melting unit for a controlled casting into the holding crucible. Protection of the melting chamber by aluminum casing easily and quickly removable to change the consumables. Crucible, die and thermocouples quick change for short set-up time. Pulling system with four rollers, stepper motor, closing and opening of the rollers with pneumatic control. Silent working plant. Control of the working parameters by PLC and touch screen video, self-diagnosing and possible alarms with buzzer. Deoxidizing chamber of the profiles Models & Specifications: Available Ex-Factory, Italy Lead Time Typically 10-14 Weeks Model Logic 70 Starting At... € 119,100.00 Model Logic 110 Starting At... € 195,520.00 Packing & Fumigated Crate.... € 1,050.00Wire, Plate & TubeMelting & Continuous CastingnewLogic SeriesPawtucket, RIhttps://www.goldmachinery.com/listings/6152310-new-goldpro-bertoncello-logic-series-horizontal-continuous-casting-induction-furnacesthe hallmark for castinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e45acb0ae670070f8e0cfda9fde0908/original-Logic-150-forni-per-orafi-e1501602739774.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7d1c7b1edae81da1180def1546bd9a1/original-logic_specs.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d895a6f0d463c6d56a182a2041a5a80f/original-logic_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae7930a736587d4331661a4bc756aad3/original-loic_2.jpg2024-09-25 15:41:00 UTC6152311440 Volts / 3PH / 50/60 cycle For welding rings without soldering Fast automatic productions Reliability to dimensions Minimum loss with 0.60mm cutter Dimension and quantity adjustment by PLC controller Separate collecting chambers for rings and shavingsWire, Plate & TubeWire & Tube Makingused6680-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152311-used-6680-140-teknik-dokum-model-bk-26-automatic-tube-cutting-machine-for-jewelry-wedding-rings-new-201814-266mm0.6-20mm9-10 Pcs/Minute5mm1.9 kW590mm x 1610mm x 1330mm330 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b94c39bbb69059e27a40b2b18ee6d383/original-IMG_5274-e1654180193271.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96d7d751785a7f482da02061a38f42a5/original-IMG_5274-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4752ebc2b762a2a9ed660424e65a7d54/original-IMG_5275-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96f614d6125d544dce49f4248abdae92/original-IMG_5276-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cec414452faf6fb2864e503962dad3b2/original-IMG_5277-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f2ab563264b602d1607b72cf5cabe37/original-IMG_5278-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32b45df02c05f446ff487217f1c73223/original-IMG_5279-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b61595dc0a229c5d6341ba7cc2922d5/original-IMG_5280-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a237fec43d3e0e4e390c34d88afd9875/original-IMG_5281-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dbab8d810bb4bd6a26ca4285c6305130/original-IMG_5282-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/391220fab81592a19d3fce8780314466/original-IMG_5283-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/234d44de2c101ab4963a976b7fdbe833/original-IMG_5284-768x1024.jpg2024-09-25 15:41:23 UTC6152312220V/3PH/60HZ Equipped With: Digital controls *Less Dissociator Additional Photos:Wire, Plate & TubeOvens / Furnaces / Dissociatorsused8133-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152312-used-8133-180-ieco-model-05-02-push-through-elevator-type-quench-furnace12 kw8-1/2" x 5-1/2"900 degrees C.36"21" x 25" x 14" deep96" x 40" x 66" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c44157628505ad8f77dd3d0cceaef9ee/original-8133.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/541d4c6f89ae5ac7410a26983b7b03b4/original-8133-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fc367e707f8191b40afbf429ff7f77d/original-8133-2.jpg2024-09-25 15:41:13 UTC6152313220V/3PH/60HZ MODEL RC2 TYPE RC2XO SERIAL #1766 HP Max 3.4 Equipped With: 4" Chuck & Knurling Tooling Functions: The parts that make up the knurling machine are the following: 1. Metal box-type load-bearing structure 2. Speed variator for spindleWire, Plate & TubeWire & Tube Makingused4375-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152313-used-4375-140-invimec-rc2-knurling-embossing-decorating-machine-for-wire-tube20000.8MM3MM12MMN/1 1590 to N/1 2210 (Variable)21" X 20" X 47" HIGH265 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77d4997ed1a83645eb795919d3a59ee5/original-1-5-e1652366982842.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65f2445c9a7c9ecd33797ad6f7df60b3/original-IMG_5056-768x1024.jpg2024-09-25 15:41:17 UTC6152314220V/3hp Equipped With: Driven Material Take-up Winder Entrance Table w/ material GuidesWire, Plate & TubeSlitters/Shearsused1476-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152314-used-1476-200-oromeccanica-model-cp80-slitter.050 (1.30mm)6.700" (168mm)3.5 Meter/min1 1/8", O/a61" x 34" x 48"h (155 x 86.5 x 122 Cm)529 Lbs (240Kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6b158289d71c5004fda57804ff2351d/original-1476.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30b832d4951b43035e0ef3d28b052dcf/original-1476-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85ef90ee5a9a3ab8144ec73fc7eb5811/original-1476-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/321935c77d11fcc03d019a7e7865d11d/original-1476-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de3529d38c242ad1761704bd11134279/original-1476-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28fbca71edfd575a8f1ab0d22b722f8f/original-1476-007-768x1024.jpg2024-09-25 15:41:19 UTC6152315DurstonDDB 1800Drawing speed: Direct drive to 4:1 reduction Overall dimensions: 1830(l) x 560(w) x 970(h) mm (72" (l) x 22" (w) x 38" high Availability: Ex-Factory Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeWire & Tube MakingnewDDB 1800Pawtucket, RIhttps://www.goldmachinery.com/listings/6152315-new-durston-goldpro-model-ddb-1800-wire-draw-bench1350 mm ( 53")0 - 10mm ( .4")60 kg. ( 132 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/675eefc80b2d6daab2eade8ee817c226/original-new-durston-goldpro-model-ddb-1800-wire-draw-bench.jpg2025-05-23 14:57:30 UTC615231614450.0Automatic machine to cut different tube profiles by means of a pair of knives which are syncronized by a cammes system. Tube advancement is obtained by a pneumatic feeder which allows a high precision even at the smallest sizes. The knife system avoids burrs inside the tube elements and avoids mixing different gold carat lime-dusts or different gold colors. Installed Power 0,5 Kw Mains Voltage 220 v Frequency 50/60 Hz Height 1350 mm Width 660 mm Length 550 mm Weight 177 kg Production Rate pcs/h6500 max Tube Diam 2/10 mm Sheet Thickness 0,1/0,5 mm Availability: Ex-Factory, ItalyWire, Plate & TubeWire & Tube MakingnewtrcPawtucket, RIhttps://www.goldmachinery.com/listings/6152316-new-goldpro-automatic-tube-cutting-machine€ 360,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/193efdecd277992bc8604430b260e283/original-trc.jpg2024-09-25 15:41:20 UTC615231712600.0This machine allows in a fast and accurate way, all the following working operations : A. Cutting spirals, made of hollow tubes for the production of earrings. B. Cutting solid or hollow tube spirals of different shape for the manufacturing of earrings, bracelets and links, which will be used to produce hand made chains.C. Cutting the section where the joint of the bangle will be later inserted. D. Cutting slices of hollow tube, by using a pneumatic jaw in Ordine to avoid vibrations or imprecise cuts. The machine is built with emulsible oil cooling system and has a special cutting angle adjustament device, that allows accurate cutting from 0° to 360° degrees. Installed Power 0,4kw Mains Voltage 230/400 v Frequency 50/60 Hz Height 1450 mm Width 680 mm Length 560 mm Weight 192 kg Cutting Lenght 350 mm Availability: Ex-Factory, ItalyWire, Plate & TubeWire & Tube Makingnewsu-4Pawtucket, RIhttps://www.goldmachinery.com/listings/6152317-new-goldpro-su-4-universal-sawing-unit€ 260,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f2fe3bb7a7ff51170fae57213dfce26/original-su4.jpg2024-09-25 15:41:20 UTC6152318220V/50-60HZ METAL SLITTINGWire, Plate & TubeSlitters/Shearsused1231-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152318-used-1231-200-mario-di-maio-mdm-motorized-metal-slitting-machine-model-c-m100100mm2mm170mm300 x 150 mm1HP530 x 450 mm900 mm1000 mm150 kg ( 352 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f26c24bec821360a64cbf2aa9ca02fca/original-040-e1483536333877.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3edc523aedbe612dc24587991c7d9044/original-0541-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ed7dd67fb4908e8d12bb30102d7886a/original-0401-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82128dd52b8ae0adeef1e7b4f8a6fd01/original-0412-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adf2defb69bdeddde99d4ed6964f5643/original-0421-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d83e2accfd6cf31e6ccae08b130008a4/original-0431-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3666ca14b832389cd372bd07e8d7c0f/original-044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc2003a51b89f6bd161c52d8e985bee0/original-045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff7e49a8b682d5dacc31d66da17f409e/original-046-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d81ee50a69df053782a9db71a7e1cfa/original-0471-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/720350dc2b7133eb53ba4b4f7216c76e/original-0491-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/054c5c36abfef422c0bcd8a893565552/original-051-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4443146d4416b287be5021676359ccf9/original-052-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/193b55574fe2bbd0d33cc49c5d541369/original-053-1024x768.jpg2024-09-25 15:41:23 UTC61523198841.0This circular shearing machine can shear plates up to 3 mm thickness. It has foot-pedal start and push-button start. The shearing holder group is made of specially steel. All movements are lubricated for ever. Works plan with surface hardening and adjustable strip guide in tungsten carbide. installed horse power 0.75 KW. power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 830 mm Width 440 mm Height 1200 mm Approx.Weight 250 kg Optional electronic variation of cutting speed, € 1.627,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcl-13Pawtucket, RIhttps://www.goldmachinery.com/listings/6152319-new-tvn-mod-cl-13-circular-shearing-machine-3mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a500da5cd60b9bdb2d7308cf0f05fbb/original-cl-13.jpg2024-09-25 15:41:16 UTC6152320Continuous forming machine for the production of tubes, pipes and profiles, welded or not, closed, open or customized, starting from a strip. Easy and strong machine suitable to form any metal with extremely reduced overall dimensions. The machine can carry out heavy rolling and forming operations, like core rolling forming and coiling to realize hollow wire chain in the various versions, aggraffato, placcato and similar. Working speed is adjusted by means of a frequency inverter;. All tools are adjustable and interchangeable with extreme easiness and rapidity, to give the best flexilibity of production. Welding is performed with the most up-to-date technologies depending on the metal used. Special version for hollow rope chain, sping rings, goldfilled and similar. Forming heads: 7 (5 vertical + 2 horizontal) Rolls: ø90 mm, special tool steel, tempered Shafts: ø35 mm Overall dimensions and weight (standard machine). Overall dimensions 1600 x 500 x h = 1250 Weight 850 kg (approx) 5500.01.04 – Speed electronic regulation Frequency inverter drive for continuous speed regulation. 5500.02.01 – Forming tool for tube ø 20 mm, thickness 1,5 mm Consisting of 7 couples of rolls in hardened special tool steel and proper steel guides. PRICING HEKLA forming machie PLUS PACKING/CRATING FOR EXPORT SHIPPING ...450,00 EURO EX-WORKS, EUROPEWire, Plate & TubeWire & Tube MakingnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152320-new-goldpro-7-head-tube-forming-machinemotor AC 2 kW with inverter drive, gearboxvariable from 0 to 5 mt/minhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73530315a39d49a03236e0b7dabed3e2/original-sdfsdf.png2024-09-25 15:41:20 UTC61523217281.0This circular shearing machine can shear plates up to 2 mm thickness. It has foot pedal start and push-button start. The shearing holder group is made of specially steel. All movements are lubricated for ever. Works plan with surface hardening adjustable strip guide in tungsten carbide. Installed horse power 0,56 KW. Power supply 380 V. 50 HZ. Three-phase. Single Head Adjustable from 0 to 140 mm Dimensions: Length 800 mm Width 430 mm Height 1200 mm Approx. Weight 150 kg Optional electronic variation of cutting speed, € 993,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcl-12Pawtucket, RIhttps://www.goldmachinery.com/listings/6152321-new-tvn-mod-cl-12-circular-shearing-machine-2mm-thickness140 mm. widthhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e896eecf2941267a299f657825644f1e/original-cl-12.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a3a0245029437bcbe65747ec71d6659/original-battitrice-mgz-4-2008-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b665bc38c709b77a0e513a8472d06e72/original-battitrice-mgz-4-2008-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a370fa11ba9bae61cf12773161189f38/original-cl1-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b734f13183181717b3d4217d82fa1087/original-cl-12.jpg2024-09-25 15:41:19 UTC615232216185.0This circular shearing machine can shear plates up to 5 mm thickness. It has foot pedal start and push-button start. The shearing holder group is made of specially steel. All movements are lubricated for ever. Works plan with surface hardening and adjustable strip guide in tungsten carbide. Construction standards in accordance to "CE" with respective documentation. Installed horse power 3 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 850 mm Width 500 mm Height 1250 mm Approx.Weight 340 kg Optional electronic variation of cutting speed, € 1.745,00 Availability: Ex-Factory, ItalyWire, Plate & TubeSlitters/Shearsnewcl-20Pawtucket, RIhttps://www.goldmachinery.com/listings/6152322-new-tvn-mod-cl-20-circular-shearing-machine-5mm-thicknesshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38ecbf466bf21910015bdfdfff80c284/original-cl-20.jpg2024-09-25 15:41:16 UTC6152323Equipped With: 48" Material Guide Feed TrackWire, Plate & TubeSlitters/Shearsused3418-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152323-used-3418-used-schussler-motorized-material-slitting-cutting-machine2"-7"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36a5b4d7e30770a09c6b87e0e779a591/original-3418.jpg2024-09-25 15:41:17 UTC6152324Casing dimensions- Diameter 1.5" Height .75" Weight of 50 Dies - 22 LBS Draw Sizes as seen / Marked on die in photographs Recently out of service Applications: Drawing dies are typically used in the drawing of wire, rod, bar, and tube. The materials that are drawn are typically copper alloys, aluminum alloys, and steel alloys. Wire drawing dies are commonly used to reduce the diameter of various ferrous and non-ferrous rods and wires. Applications include various grades of low, medium and high carbon steels, steel alloys, stainless steel, welding wire as well as various non-ferrous rods and wires. Tungsten carbide drawing dies give the wire manufacturer the ability to maintain uniform wire roundness, minimizing material usage and scrap. Tungsten carbide dies are an excellent option for manufacturing ferrous rod-size wires. They are also ideal for short trial runs.Wire, Plate & TubeWire & Tube Makingused3047-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152324-used-3047-140-lot-of-50-tungsten-quality-carbide-medium-size-wire-and-tube-drawing-diesMetric tolerances [mm]Tolerance Diameter Tolerancehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e06bdeb421569abc8027fc7e119199fc/original-IMG_5729-e1573915649951.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94a972c0b9f50ca494a3a4a1adb591e8/original-IMG_5735-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4edc20f107aafd3b81dc029285afb1bc/original-IMG_5729-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63763497e249561741a6aad536a84849/original-IMG_5730-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/678313416b94409ff488adc04e469d9b/original-IMG_5731-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/121362bf72b3af9266eefd5e5e869b95/original-IMG_5732-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cafc8146b03d3d924ca07166f37d4cba/original-IMG_5733-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a215e97eeca1633e112cf8c7810d3b8/original-IMG_5734-1024x768.jpg2024-09-25 15:41:22 UTC6152325Scroll Down To See Video! Furnaces with vacuum system and purged nitrogen to harden products made of all gold and silver alloys and copper-based alloys with surface cleaning effect. Highlights The furnace is used for all the products made of every precious and non precious metals alloys and it can be used for the treatment of casting products with precious stones, too. Working cycle in vacuum chamber with nitrogen gas injection. Automatic heating and forced cooling cycle programmable by PLC, with the possibility of recording working datasheets. GB HIGH-TECH. The operator is guided step by step by a touch screen video in the furnace setting. Heating treatment chamber with internal ventilation of the inert gas and purging at the beginning of the cycle Self-diagnosing and possible alarms with buzzer Buzzer alarm at the end of the cycle. Substantial increase of the mechanical resistance and hardness of the products. Absolute homogeneity of the results without oxidation and preserving the shining colour of the finished products Link to PDF Catalog Available Ex-Factory, Italy Lead Time Typically 6-8 Weeks Starting At... € POR Packing & Fumigated Crate.... € 660.00Wire, Plate & TubeOvens / Furnaces / DissociatorsnewGammaPawtucket, RIhttps://www.goldmachinery.com/listings/6152325-new-goldpro-bertoncello-gamma-vacuum-hardening-furnacesthe hallmark for hardeninghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a27805a9c95d803105d597a350478329/original-Gamma-e1571229444427.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a749d20666600665f6c5e5337093c0a8/original-gamma_specs.jpg2024-09-25 15:41:13 UTC6152326240V/1PH/50HZ Tooled for 5,00 mm This machine can make square, rectangle, round, half-round and oval hollow tubes from 4 though 8-10mm, using metal straps with 30mm maximum useful width. Equipped With: argon arc welding unit which makes perfectly welded hollow tubes with no additional materialWire, Plate & TubeWire & Tube Makingused8697-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152326-used-8697-140-mdm-mario-di-maio-6-station-tube-forming-machine-with-welder-s-n-mdm-maa2338" x 24" x 48" high0.25 - 0.70 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88bc0b04134730f30ececb1950bee6d5/original-DOM-028-e1346241383724.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d03f038375b562e3d4f6210557fd27af/original-DOM-0281.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4983d4758cfcdf40856015d777a7c799/original-DOM-029.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fa6c2de52c7b103b7b4e851750645c6/original-DOM-030.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be6732e7ca7c16f1c14a5290b7889231/original-DOM-031.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49de319fff47c34e361a68a1430d6f95/original-DOM-032.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cde001b1db0fe495b8d350b2b23f301f/original-DOM-033.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35f01df06727941c2560aa37c122c3b8/original-DOM-034.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57fa4bf701285301d34f494c33572fc3/original-DOM-035.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/197d5d127b1509f581ce53d50fce2468/original-DOM-036.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49224a34c78a8278af52268ef0fc729c/original-DOM-037.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c9354fd5e61e072294838f7594f21e1/original-DOM-038.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3aa83aa5a660fcf4f8ad5404ab5a6225/original-DOM-039.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/115d55e07838847a5beea7b1e73671a9/original-DOM-040.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/162108231755aad3446ed194e23b484d/original-DOM-041.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/883a9a838087f47ff1e38759be897769/original-DOM-042.jpg2024-09-25 15:41:32 UTC6152327These machines are been made in order to create the points on wires of different diameters for then put them on the dies. The functioning is with eccentric throats and the cylinders are tempered and grinded. The extreme speed of the point’s execution and the facility of use to become the machines particularly suitable for the firms producer of wires in general. Model AT/3 From 3mm to 1mm Model AT/10 From 10mm to 3mm Model AT/14 From 14mm to 4mm Ex-Factory, Italy PLUS PACKING FOR EXPORT....400,00 EUROWire, Plate & TubeWire & Tube MakingnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152327-new-goldpro-tvn-wire-pointing-machines3-10 mm or 1-3 mm3 KW250 KG550 mm, 350 mm, 1150 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34a1c54ea7609ea4c8d4b5b3f2cd8f39/original-pointing.jpg2024-09-25 15:41:17 UTC6152328Casing dimensions- Diameter 1.5" Height .75" Weight of 50 Dies - 22 LBS Draw Sizes as seen / Marked on die in photographs Recently out of service Applications: Drawing dies are typically used in the drawing of wire, rod, bar, and tube. The materials that are drawn are typically copper alloys, aluminum alloys, and steel alloys. Wire drawing dies are commonly used to reduce the diameter of various ferrous and non-ferrous rods and wires. Applications include various grades of low, medium and high carbon steels, steel alloys, stainless steel, welding wire as well as various non-ferrous rods and wires. Tungsten carbide drawing dies give the wire manufacturer the ability to maintain uniform wire roundness, minimizing material usage and scrap. Tungsten carbide dies are an excellent option for manufacturing ferrous rod-size wires. They are also ideal for short trial runs.Wire, Plate & TubeWire & Tube Makingused3044-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152328-used-3044-140-lot-of-50-tungsten-quality-carbide-medium-size-wire-and-tube-drawing-diesMetric tolerances [mm]Tolerance Diameter Tolerancehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fda40f288b020350ccca71aed808af98/original-IMG_5720-e1573915511742.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10c5b5aa30f109e1df20994fbbc4021d/original-IMG_5727-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75cbe7407cef2c4705884bb579aa4c79/original-IMG_5720-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bccc3a888aefb23ecc20a79ce8579b7/original-IMG_5721-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26d0b1ab28078420c7649e19595c11c9/original-IMG_5722-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5ef10b45d6c6bc2279ef31ce5325c19/original-IMG_5723-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b80c5dda88a7003a5b6ec9328d185bb9/original-IMG_5724-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b85d69986a4821bed5c708e6ad0fe89/original-IMG_5725-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d77724e6b48431c343519d0886cf14b1/original-IMG_5726-1024x768.jpg2024-09-25 15:41:22 UTC61523298950.0This machine is suitable for making tube starting from strips of plate. The profiles variety of the anchorite pin and thread pin allow a lot of variety of tube' s profiles obtainable from the manufacturing. Below there are some profiles. For a good tube result is essential that the strips have a high precision on the width. The base machine is supplied with special chuck; the maximum travel of extraction is 5 mm for turn, for building spirals in continuous. It has a carriage with loose movement on ball - bearings where are assembled the different equipments. The chuck rotation adjustable with handle from 40/500 r. p. m.. Foot-control start. Construction standards in accordance to "CE" with respective documentation. Installed horse power 0,75 KW. Power supply 380 V. 50HZ Three-phase. Dimensions: Lengh 850 mm Width 550 mm Height 1100 mm Approx. Weight 170 kg Equipped With: TOOLING LIST : ROUND WINDING SCHAPE Spina filettata (per Campanelle).. 425,00 € Thread pin (for ear-ring) Foro di trafila + spina ancorata.............. 291,00 € Hole die with anchorate pin OVAL Spina ovale liscia................ 808,00 € Polished oval pin Spina filettata scomponibile (per Bracciali ovali)....... 1.965,00 € Decomposable thread pin (for oval bracialets) Portatrafile oscillante...................... 347,00 € Oscillating die-holed support Foro di trafila più spina ancorata per formare i tubi sagomati...... 902,00 € Hole dies with anchorate pin for making the light sections tubes Attrezzatura per costruzione di spirali in continuo con testa oscillante....... 303,00 € Equipment for building of continuos spirals with swinging head Mandrino a 3 cagnoli con ghiera.......... 450,00 € Chuck three jaws with nut - Guidafilo ottico....... 3.400,00 € Optic thread guide Availability: Ex-Factory, Italy Check the latest exchange rateWire, Plate & TubeWire & Tube Makingnewavr-o-bPawtucket, RIhttps://www.goldmachinery.com/listings/6152329-new-tvn-mod-avr-o-b-winding-machine-for-tube-and-spiral-in-continuoushttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1ab6d9bf3e2c314d6831314723e08e6/original-unnamed-4-e1399980795434.jpg2024-09-25 15:41:22 UTC6152330Simultaneously gear driven entrance & exit rolls- 2 1/2" Diameter rolls Forward & reversing control 220 V. 3ph 60 Cycle #2) RECTANGULAR 2-ROLL TURK'S HEADS Approx. 1 1/2" Diameter roll1/2" w. #2) CYLINDRICAL 2-ROLL TURK'S HEADS Approx.1" Diameter roll #1) RECTANGULAR 2-ROLL TURK'S HEADS Approx.1" Diameter roll .25 w. overall size 36" / 26" 45"h approx.weight 225 LBS Equipped With: Assorted rolls as photographedWire, Plate & TubeWire & Tube Makingused3045-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152330-used-3045-700-wire-tube-knurling-decorating-patterning-turk-s-head-machine-toolinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/214a9beb7a404a2462f3ed65e9db5b22/original-1-2-e1569267277477.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac4b3104f65fd075ac1b4f642dbb41b/original-066-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43400b6b1ad1e81723c2eccfc3e377dd/original-067-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cde8f563d368525b2dc00d3c02efdfe/original-069-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75a2b70fc136119b195acca6cf8c1eb2/original-070-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a195346af34991c710272aa24cc9116c/original-1-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0141b6f0e29b3575495edd1ee1b24dbb/original-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bd93a15dd5ff2b2bcb384c71fe8534c/original-023-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a016a85be2a08156e605b26b4aaaa56/original-061-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8395ec3962707bb028bad23c217a6837/original-062-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df88e92dec613be0dd7f3f717425a738/original-064-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac8c2334aba32e3355932463cf47902c/original-065-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63cf84c6c04116a84c36f700b9ceeeda/original-IMG_7907-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4340b522193f3137c5b6eed7e709d0e/original-IMG_7908-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3dca2d8316c0436e9aed22fe2beb5a21/original-IMG_7909-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fae4a55a18c01c74923710c6f52e948a/original-IMG_7910-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6aa91cd8f262e50043d79ac1d9ccbe60/original-IMG_7913-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ecc64ee5f2fdc49c386993a3c40c573/original-IMG_7914-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/120cdb796478ecd7b3044846f166a498/original-IMG_7916-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6ada5d2bbff6945b22ea994c0e05380/original-IMG_7919-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aaf69d1bc73cc6372d3d1a624e81a3f3/original-IMG_7919-3-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/278e061912e630f9c16f983acd764ad6/original-IMG_7920-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99e4cd340889d3d66594befa0801e97a/original-IMG_7921-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc7f9d952dfffe81a76ca80d6f735d72/original-IMG_7922-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2cfa3c63702c6149648e26fe6eb5ebd/original-IMG_7924-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/820d6693f7f8c4b7d7faa33da7e33811/original-IMG_7925-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06913f8d38c9b440fcd1478983707375/original-IMG_7926-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99bf4dcfb1d14cb47e7554ef7aa0cf83/original-IMG_7927-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76dfc9be33428c02333db46d5ee8f34a/original-IMG_7928-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d29fcedc8eb2f70397704ec7cb10788/original-IMG_7929-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/19d40f87867c279a6b8754dd83d54b17/original-IMG_7931-1024x768.jpg2024-09-25 15:41:35 UTC6152332This machine allows the production of different profile of soldered or unsoldered tubes, starting from strips of plate of different diameters, previously slittered by a multiple cut shearing unit built- in the machine. The strip is shaped by a set of tempered and grinded rollers into the required shape. Then takes place the soldering process which thanks to the TIG system and a patented easy process for the torch regulation, permits a perfect alignment of the tube. This model of machine is rather unique for its digital control of the advancement speed of the rollers and its perfect micrometrical adjustment of the height of rollers by precise sliders. TECHNICAL DETAILS P316 Tube Making Machine...€ 39.500,00 Welding unit..... € 5.650,00 Shearing unit......€ 3.450,00 Extra tooling from 3 to 11 mm tube...€ 11.450,00 Ex-Works, Italy Delivery 60 days *Pricing subject to changeWire, Plate & TubeWire & Tube MakingusedP316 LorenzatoPawtucket, RIhttps://www.goldmachinery.com/listings/6152332-used-goldpro-p316-lorenzato-tube-making-machineKW 1,5 V 220 Hz 50/60 mm 1400 mm 1250 mm 900 Kg 390 mm 3 – 16 mm 0,15 – 1,5https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af7188eb4f0fc524bbc623e022e1e11b/original-M-004-Profilatrice-P316_Senza-cambaletto-1024x768-e1432726279724.jpg2024-09-25 15:41:20 UTC6152333415 Volts / 3 Phase / 50Hz Head Speed Control This machine is set up and tooled for 4mm on one side and 8mm on the other side Estimated weight 1800 lbs Equipped With: Speed controlWire, Plate & TubeWire & Tube Makingused1731-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152333-used-1731-140-fioa-double-end-double-side-tube-forming-machine3mm,4mm,6mm,8mm tubing48"x23"x46"Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/571814a3ac9ded8e2cb42aae4537977d/original-R-041-e1416920689456.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d8868e21d278d7481af401baa53e986/original-R-0411-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09e824811d08f9b95b3d2103be81cc84/original-R-042-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91e219707736d9fbb0bdc7fcc9f78f11/original-R-043-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47bba167843e29ab993166723d829814/original-R-044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29fad7b1ba8d42fc47aa469602eb7d3a/original-R-045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5aab03ee73012c197ad0332b6865cad2/original-R-046-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf4b11df4a2c7f9100e8be0978f5043a/original-R-047-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c74bd1f33295113f75870021a22ec08a/original-R-048-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4a0352301518a493d9be6493c130544/original-R-049-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29e02decd622239f3496e74cd0dcdc0b/original-R-050-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c04e0423911b63ba5b4cd4c50c57e6a/original-R-051-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06b623aa6a77b4e31aa992ca47908062/original-R-052-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18cd41832b02713a62f3599dcd7eaeaa/original-R-053-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad930741cbcbd1061b62bc0e4141812b/original-R-054-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cca08ecf5a80a0be25480c4e6f4c39a/original-R-055-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20c0d10e6a509e38adcaf31ddc214f99/original-R-056-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f6eee69ac4b157437fda57a18c2f84a/original-R-057-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c26576cce48eba6208e2ad86b33f4c8/original-R-058-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b34d30568ce69c48cbfae27838d01b95/original-R-059-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a905498109815930c0a66021e2f76a52/original-R-060-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4da2fa9c133c7081726b715135718c65/original-R-061-768x1024.jpg2024-09-25 15:41:31 UTC6152335Cellini Decorative Wire Hammer Machine Stand Mounted Less MotorWire, Plate & TubeWire & Tube Makingused3358-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152335-used-3358-used-cellini-decorative-wire-hammer-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/575a0c96c629a7bdd766cf0712b5cfd6/original-3358.jpg2024-09-25 15:41:22 UTC6152336The machine is made to straighten Ag-Au material tubes and relative alloys. The complex of parts are mounted on a solid steel structure composed of base and cover connected by columns and tie rods to keep rigid the machine. The machine has 4 couples of rollers aligned on the vertical axis. The angular and vertical controls are manuals, through suitable wheels with gravitational analogical indicators. To guarantee the position of rollers during the working a mechanic locking system with driving lever is applied on every roller. The machine is supplied with a entry guide plate with nylon bush adjustable for height and a counterbench in exhit to support the tube. Technical Data: Double straightening speed 5-10 mt/min Diameter range tubes from 15 to 28 mm. Thickness range tubes from 2-4 mm. Length range tubes from 1000 to 2000 mm. Yielding 500 N/mm2. Feeding direction tube from left to right. Installed horse power KW 2.3. Power supply 400 V. 50 HZ. Three-phase. Dimensions: Length 2000-3000 mm Width 1000 mm Height 1650 mm Approx.Weight 1300 kg Notes: Construction standards in accordance to “CE” with respective documentation. Accessories: Rollers “V” bench lift 4.830,00€ Series of hyperbolic rollers 10.235,00€ Availability: Ex-Factory, Italy Price: € 27.525,00 Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeWire & Tube MakingnewRT-8Pawtucket, RIhttps://www.goldmachinery.com/listings/6152336-new-tvn-tube-straightening-machine-mod-rt-8€ 476,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/472b6ff3b789e659bf5ee96c7b54883d/original-RT-8.jpg2024-09-25 15:41:20 UTC6152337Single Plane Wire Straightener 7 RollsWire, Plate & TubeWire & Tube Makingused0142-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152337-used-0142-used-single-plane-wire-straightenerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b988a2351050c1fc4a396689394a6b91/original-0142.jpg2024-09-25 15:41:22 UTC6152338Linear chain wire-drawing machine with useful drawing-work length variable on request (5 mt. about standard), studied for heavy-duty wiredrawing operations. Max drawing 5000 kg. with opening of the self-centring pincers max 25 mm. The drawing speed is controlled from the work station and adjustable from 1 to 10 meters per minute with constant couple and from 10 to 20 meters per minute with constant power. The carriage has shock absorbers and a special gripping system. Automatic carriage return with safety device. The traction group is composed with a gear reducer in oil bath and a vectorial asynchronous three-phase motor. Minimum maintenance with simple level controls every 2000 hours of working. There is the possibility to release the carriage at intermediate stroke with safety device. Die-plates lubrication and adjustable working plan. Construction standards in accordance to “CE” with respective documentation. Installed horse power 10 KW. Power supply 380 V. 50 HZ. 3-phase + N Dimensions: Length (5 mt. useful) 6950 mm Width 880 mm Height 1400 mm Approx.Weight 1280 kg Variations And Prices 3 METRES USEFUL 3500 KILOS……………Mod. TK35…………..€ 30.472,00 DRAWING POWER 5 METRES USEFUL 3500 KILOS……….Mod. TK35……….. € 34.351,00 DRAWING POWER 7 METRES USEFUL 3500 KILOS………..Mod. TK35………..€ 38.124,00 DRAWING POWE 11 METRES USEFUL 3500 KILOS………Mod. TK35……. €48.040,00 DRAWING POWER (divided 13 METRES USEFUL 3500 KILOS…….Mod. TK35……….. € 51.360,00 DRAWING POWER (divided) Parts: Machine in two separated parts to facilitate the carriage…….. € 1.938,00 Screw-plates lubrication for TK35 ………. € 807,00 Adjustable work plan for TK35…….. € 518,00 Counter pipe stretcher for TK35 …….. € 761,00 Chamfering equipment for strips for TK35………… € 642,00 Anchorate pin holder frame for TK35 ………….. € 722,00 Spare return carriage rope for TK35 (price at metre) …. € 7,62 Spare return carriage belt for TK35 (price at metre)……. € 31,00 Spare rotating couple tips for TK35…… € 397,00 Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull Blocksnewtk-35Pawtucket, RIhttps://www.goldmachinery.com/listings/6152338-new-tvn-goldpro-mod-tk35-chain-wire-drawing-machine-3500kg-drawing-powerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbf286c42ff9d7b97849e878cc3b78f4/original-tk-35.jpg2024-09-25 15:41:26 UTC615233958268.0Special multiple passages wire-drawing machine with electronically adjustable clutch through potentiometer and with digital visualizator for drawing both big wires and capillary wires. The machine has electronic variation of drawing speed through potentiometer. Foot control selectable for die-plates inserting, rotating protection on the work zone and standards control (continuous with low protection and foot-control with high protection). Forced lubrication on the wire-drawing plates with double entry and on the traction toiler with decantation and recirculation system. The lubricant tank is outside and detached from the machine with 150 liters capacity. Coiler 320mm diam. on the last passage. Wire input passage 4 mm diam. Drawing speed 0 - 300 Mt/1'. Reduction of section 15%. Tungsten carbide driving toiler. Downcoiler group with safety stop and sensor for end thread. Vertical revolution counter toiler with planning. Construction standards in accordance to "CE" with respective documentation. Installed power 18 KW. Power supply 380 V. 50HZ Three-phase. Dimensions Length 2000 mm Width 900 mm Height 1130 mm Approx. Weight 1400 kg Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull Blocksnewtms-2ePawtucket, RIhttps://www.goldmachinery.com/listings/6152339-new-tvn-mod-tms-2e-twenty-20-electronic-passages-wire-drawing-machine-max-wire-4mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a185e61d4909688f896da1f5dddaf197/original-tm-s-2e.jpg2024-09-25 15:41:26 UTC6152340Linear chain wire-drawing machines with useful drawingwork length variable on request (5 mt. about standard), for drawing wires of overage dimensions, for rounding out plated plates, etc. Driving gears in oil-bath, carriage with special closure, automatic carriage return with limit stop. Standard protections on the working place. Construction standards in accordance to “CE” with respective documentation. Total installed horse power 2,6 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 5 mt us.=6000 mm Width 600 mm Height 1400 mm Approx.Weight 450 kg Options Double speed Electronic variation of speed. Machine in two separate parts to facilitate the carriage. Lubrication on the wire-drawing plate with recirculation system. Works plan with adjustable height. Counter stretcher for pipes. Chamfering equipment for plate. Frame for anchorate pin. Winder for output wire. Useful length 7/9/11 meters on request.Wire, Plate & TubeWire-Drawing / Bull Blocksnewtk-15-exPawtucket, RIhttps://www.goldmachinery.com/listings/6152340-new-tvn-goldpro-mod-tk-15-ex-chain-wire-drawing-machines-1500-kg-drawing-powerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f342339555da222722a4fdefe89a996/original-TK15.jpg2025-09-30 15:41:27 UTC6152341220V/3PH/60HZ Equipped With: Powered take up Payoff with friction clutch Foot pedal with foot jog/continuous run option Guided material entrance table Assorted blades sizes on the slitter roll knives: - 0.435 - 0.976 - 0.175 - 0.210 - 0.235 - 0.255 - 0.312 - 0.337 - 0.835 -10- 1.0262 Additional Photos:Wire, Plate & TubeSlitters/Shearsused8255-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152341-used-8255-200-goldpro-m-violi-machine-co-11-gang-type-metal-slitting-machine-for-thin-metal-strip10" approximate.040" +/-2"/50mm4"/100mm33" x 24" x 42" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98a6dda02b5de25f9cf2ecfa859ceb8e/original-8255.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8890cc731ec6806213f6a883afca8f8/original-8255-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf4ec30179b5af76b8167c8acd1bc06e/original-8255-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58a6888921bb60e72622741106312f60/original-8255-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7933f13c436055d7c3e3970f797ba20/original-8255-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8afbccd7c508b30ae2f8fa061e91b2e4/original-8255-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4956f260d47b38945a9ed96f34a0ae69/original-8255-2.jpg2024-09-25 15:41:16 UTC6152342the drawing power.Drawing speed adjustable with continuity through the handle of the flow compensated regulator three-way, positioned on the tank cover.Carriage return speed 10 mt/1' min. constant (independent from the selected drawing speed). Pre-closure power of pincers (power on the tube to draw) adjustable with continuity from 100 to 2100 kgf, through the screw of maximum pressure valve positioned on the cover tank. Maximum time working way in automatic-manual selectable through the lever from the control panel. automatic starting of carriage after 1 second, automatic stop at endstroke, 1 pushbutton for opening the pincer and the automatic return of carriage after 1 second, automatic stop at return end-stroke. Movable end-stroke to draw a great quantity of bars with length lower than 2 meters. and closure of pincers, go and return carriage). Pushbuttons to start and stop the motor, safety stop, pushbutton to stop the carriage in any position without stop the motor. Construction standards in accordance to “CE” with respective documentation. Technical Data: Maximum drawing power 90000 Newton. Installed horse power 11 KW. Dinensions: Pre-bench Length 2200 mm Bench Length 2400 mm Width 540 mm Max Height 1750 mm Approx.Weight 1200 kg Variations and Prices 1 METRE USEFUL…………………….Mod. TI/100/1M………………… € 27.133,00 2 METRES USEFUL ………………….Mod. TI/100/2M………………. € 33.992,00 2,2 METRES USEFUL ……………….Mod. TI/150/2,2M……………… € 41.055,00 3 METRES USEFUL ………………….Mod. TI/100/3M……………….€ 37.283,00 Accessories: Spare pincers (radiate/plane) (price at couple) …………………………………………………. € 509,00 Spare pincers holder (price at couple)……………………………………………………………….. € 1.294,00 Hydraulic oil (price at kilos) ………………………………………………………………………………… € 7,00 Height quality round dies diameter 32/25 (price a piece)………………………………………….. € 568,00 Height quality round dies diameter 25/16 (price a piece)………………………………………….. € 524,00 Height quality round dies diameter 32/70 (price a piece)………………………………………….. € 713,00 Anchorated caps (price a piece)………………………………………………………………………… € 472,00 Tempered pins (price a piece) …………………………………………………………………………. € 356,00 Tempered ring for extraction (price a piece) ……………………………………………………… € 189,00 Adjustable rolling head with rollers(max 25×25) ………………………………………………… € 16.480,00 Spare rollers (each)o……………………………………………………………………………………… € 815,00 Spare pins (each) ……………………………………………………………………………………. € 284,00 Pre-bench with lifting rollers “V” …………………………………………………………………. € 6.415,00 Carriage for tubes max diameter 100 mm……………………………………………………. € 9.776,00 Rollers group for expanding………………………………………………………………….. € 1.745,00 Rollers group for expanding for diameter 80 ……………………………………………. € 5.194,00 Lubrification plant with recycle on dies ……………………………………………………… € 4.352,00 Auction for anchored ogive diameter 12XL useful ………………………………………. € 225,00 + thread coupling and regulation Availability: Ex-Factory, Italy Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeWire & Tube MakingnewTI100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152342-new-tvn-goldpro-model-ti100-hydraulic-wire-drawing-machine-9000-kgf1 second. Double1 pushbutton for the closure of pincer and1 separate pushbutton for each manoeuvre (opening2 meters.from 0 to 5 mt/1' min. adjustable independently fromhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa833b11e65b5d37ea0de37f372caa82/original-TI100.jpg2024-09-25 15:41:20 UTC6152343115V/1PH/60HZ Serial Number 5393 Equipped With: Flood coolant Foot pedal Jog or continuous runWire, Plate & TubeWire & Tube Makingused7632-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152343-used-7632-140-stanat-goldpro-7-diameter-bull-block7" x 11" high taper to 6" on top8" x 9" with 1-1/2" hole20" x 25" x 50" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a598f996e9bf2c8c1064afea75971b99/original-7632.jpg2024-09-25 15:41:20 UTC6152344This type of draw bench is produced on the basis of the customer's needs in accordance with the work to make. Consequently, all the technical data of it will be fixed on demand This type has been studied to the drawing either for inside or outside of tubes of large gauge and of rod with high diameter. The machine is equipped with a lubricating system which is suitable for the type of work to be completed The carriage has the movable mechanisms that are completely included inside it, to guarantee a larger security of the operator Please contact us for more information Available Ex-Factory, Italy Plus CratingWire, Plate & TubeWire-Drawing / Bull Blocksnew1710CEPawtucket, RIhttps://www.goldmachinery.com/listings/6152344-new-goldpro-varini-mario-motorized-draw-bench-with-inverterPriced €PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc12bd5ab71a8542d8aee1d80d5ea394/original-7-e1516887296857.png2024-09-25 15:41:23 UTC6152345220-440V/3PH/60HZ Vertical Capstan Equipped With: Forward/reverse drum switch Metal standWire, Plate & TubeWire-Drawing / Bull Blocksused3186-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152345-used-3186-140-stanat-type-9-1-2-wire-draw-bull-block9-1/2" diameter1 HP gear driven0.25"50" x 22" x 46" high750 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80e1a427180dc7a32840a4a908e8e068/original-IMG_4743-e1569849051613.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c049f3569496417da66ac83d1342da9/original-IMG_4747-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50068f393b688000f145a8c7170df77a/original-IMG_4748-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4acc1e4305da397bd783d25210e08b1e/original-IMG_4749-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e65ff2e1d093eb6296c851dbc17bbf73/original-IMG_4750-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db8fe2e7ccb1859f7ced042bbd8a4a2b/original-IMG_4751-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cd719eb43817c7c8f03fe614f00f6b0/original-IMG_4752-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5146172fce0547c81db0dc857e9c6022/original-IMG_4743-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e5e414064db71f5a2127fba5c4e9a00/original-IMG_4744-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbf4c5e70d60202572d8ccea2165922c/original-IMG_4745-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e07deb18a356e20308b1522ddb204f8/original-IMG_4746-768x1024.jpg2024-09-25 15:41:29 UTC6152346Bench with head drawplates support adjustable in height to obtain the correct alignment with the material to draw. The bench is equipped by handle and hook. Model 1001: Model 1002: Available Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull Blocksnew1001Pawtucket, RIhttps://www.goldmachinery.com/listings/6152346-new-goldpro-varini-mario-hand-draw-bench160 CM120cm x 52cm x 100cm50 KgPriced €960,00Priced €910,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a203d15d1ae59d0a0bc0c3989069a24/original-114-e1516885563257.jpg2024-09-25 15:41:23 UTC6152347TVNT12/EX/C/BELSpecial multiple passages wire-drawing machine with a particularly efficient clutch for drawing big wires and capillary wires. For capillary wires can be utilized a suitable coil winder. A perfectly electronic control system with digital visualizator allows to obtenir the finest winding operation according to the type of thread. Constant thread tension adjustable and regulator of the spacing pitch. The machine has foot-control selectable for die-plates inserting, rotating protection on the coilers and standards control (continuous with low protection and foot-control with high protection). Technical Data: - max diameter wire input 0,30, minimumdiameter wire output 0,06 mm, - drawing speed max 550 mt/min., coils max diameter 120 mm, - minimum uncoiler diameter 65, coils max width 130 mm, - complete with sensor for end wire and breaking, - sensor for end coil with photocell, lubrication system with recirculation, - electronic management of working parameters Notes:Construction standards in accordance to “CE” with respective documentation. Installed horse power 5 KW. Power supply 380 V. 50 HZ. Three-phase + N. Accessories: - Sensors for check wire and winders. - Complete set of diamond dies (your initial and final sizes to inform us). - Litres 10 emulsifiable oil. - Tungsten carbide coiler. Dimensions: - Length 1900 mm - Width 900 mm - Height 1390 (1900) mm - Approx Weight 550 kgWire, Plate & TubeWire-Drawing / Bull BlocksnewT12excbelItalyhttps://www.goldmachinery.com/listings/6152347-new-mod-t12-ex-c-bel-twelve-pass-wire-drawing-machine-for-capillary-with-linear-electronic-bobineurhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d0ed4be0bdd999b6887a44fb40dab68/original-T12excbel.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87fa737d2a270255ca2f786bef7e1e44/original-IMG_2104-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1915de77f0090e838cdbc8473f01cd50/original-IMG_2105-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9930a1e5d1c98bdfc0dc899dc848370/original-IMG_2106-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ba6031db615ed96f7d0bed3841a4160/original-IMG_2096-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/096f041bdc4a02030411721344f7e76b/original-IMG_2097-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2aaa8219377f0996c90ec9980df1435/original-IMG_2098-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fcfde0503736cb8223557860d796e4c/original-IMG_2099-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb97959144aee67fe30852e7e3953a36/original-IMG_2100-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d73c071b74616b65779641be399aac87/original-IMG_2101-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/320ed47ec5cb73e7e2ebe624a2bba629/original-IMG_2102-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da3e5a9e08897521ac60a0239f37f5a6/original-IMG_2103-1024x768.jpg2025-01-09 13:17:08 UTC6152349Special FOURTEEN passages wire-drawing machine. Pre-setting by programmer of total metres. Machine for drawing wires max diameter input 2 mm and capillary wires (0,15 mm). For capillary wires can be utillized a suitable coil winder. A perfectly electronic control system with digital visualizator allows to obtenir the finest winding operation according to the type of thread. Constant thread tension adjustable and regulator of the spacing pitch. An ring sensor feeler tests the occasional breaking of the wire during the working operation. Tungsten carbide driving coiler. The machine has electronic variation of drawing speed from 0 to 550 meters per minute, with semi-vectorial operated. Foot-control selectable for die-plates inserting, rotating protection on the coilers and standards control (continuous with low protection and foot-control with high protection). Forced lubrication on the wire-drawing plates and on the coiler with decantation and recirculation system by a separated big tank in inox steel and potent pump. Inter-locked unwinder in input skein and coil with feeler for end wire . Winders max 180 mm diam. and 120 mm width can be utilized (possible different size according request). Sensor for end coil. Construction standards in accordance to “CE” with respective documentation. Technical Data: Installed horse power 13 KW. Power supply 380 V. 50 HZ. Three-phase + N. (Available in 220V, 3HP, 60Cycle) Approx.Weight 900 kg Accessories: Ceramic Coiler €5.829,00 Down Coiler w/safety stop €2.590,00 Packing & Crating €569,00 INOX Coils €529,00 Availability: Ex-Factory, Italy Price: POR Check the latest exchange rate Listed price subject to manufacturers price increases without notice.Wire, Plate & TubeWire-Drawing / Bull BlocksnewT14VFPawtucket, RIhttps://www.goldmachinery.com/listings/6152349-new-tvn-t14vf-fourteen-passages-wire-drawing-machine-for-finish-with-electronic-bobineur2750 mm1000 mm1480 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/551ddc7fe1c71ed51ae4ba7510e5482b/original-T14-VF.jpg2024-09-25 15:41:24 UTC6152350Three-Phase Power 5HP Motor Available Ex-Factory, Italy Plus CratingWire, Plate & TubeWire-Drawing / Bull Blocksnew1501Pawtucket, RIhttps://www.goldmachinery.com/listings/6152350-new-goldpro-varini-mario-motorized-draw-bench-with-alternating-current3.000 Kgmt. 6/mPriced €11,120,00Priced €12.210,00Priced €13,640,00Priced €15,180,00Priced €17,050,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dea7eb14b3b982238df7547c2f3573b9/original-5-e1516886974532.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e763ba53fe3925c79c632bee00ae96c6/original-6.png2024-09-25 15:41:23 UTC6152351Durston is proud to be the only manufacturer of round rolling mills. The DMR Round 130 RE Rolling Mill creates perfect circular wire forms through ten rounded forming grooves. The mill is constructed from one piece of cast iron for maximum rigidity and strength. The bearings are self-lubricating and maintenance-free and fully support the induction hardened rollers. The rolls themselves provide a large flat rolling surface, as well as the ten rounded grooves enabling rolling from 6mm to 1mm round wire. Flat rolling has a maximum thickness of 6mm. Durston’s industry beating 5-1 gearbox makes each turn of the mill effortless and ensures perfect results over a lifetime. The addition of four side extensions provides half rounds in 4, 3, 2 and 1.5 mm. The rolls themselves have a diameter of 60mm. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,749.00 Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-130REPawtucket, RIhttps://www.goldmachinery.com/listings/6152351-new-goldpro-durston-drm-round-130mm-re-rolling-mill47.8 kg45.3KG4102203655-to-1 gearbox106Round601304, 3, 2, 1.5mm10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ddfee834c675963c6d3a8d6bab9e2df8/original-09-07-2018-17-36-46-7-510x612-e1571855808956.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ce52b86c83e15cb3dd7f57239e0371e/original-09-07-2018-17-36-46-7-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e99a141001a8160e8c652bb79b7c2748/original-Durstons-Agile-C130-Rolling-Mill-pic3-1029-510x612-3.jpg2024-09-25 15:41:29 UTC6152352The Durston Mini C100 Rolling Mill is the big brother combination rolling mill to the Mini 80. It is an economic mill combining low price with a significant degree of versatility, with a milling width of 100mm. Its one piece cast iron construction is designed and manufactured for maximum strength and rigidity. Its maintenance-free bearings, and direct drive means a lifetime of consistent rolling. Taking a maximum sheet thickness of 5mm and the maximum wire thickness of 6.5mm, the Mini C100 benefits from 9 wire grooves consistently rolling your wires from 6.5mm to 1mm. The Mini C100 also helps from four half-round extension rollers to increase the versatility of your mill and has large and comfortable-to-read calibrated discs and a wheel on the top for ease of use. The Mini C100 Rolling Mill from Durston is guaranteed to give you a lifetime of performance. Technical Details: Available Ex-Factory, TN, USA Priced for: $838.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewMini-C100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152352-new-goldpro-durston-mini-c100-rolling-mill-100mm-with-side-extensions17.3 kg15.5KG280170270Direct drive95Combination451004, 3, 2, 1.5mm6.5mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/daed2bad683b9f1d0573d4513f593ba8/original-Durstons-MINI-C100-pic1-1003-510x612-e1571855370403.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e86a3d92ef228a3dbbced86892e52350/original-Durstons-MINI-C100-pic1-1003-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e654ffbe9bc11f8ded179eec2489bdc3/original-c100-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76f1bbaaed005117425a8db77780d203/original-1103-1-510x646.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09b7d7a9ce525f2ec47dfdadf20a1e1f/original-Durstons-MINI-C100-pic1-1003-510x612-1-1.jpg2024-09-25 15:41:31 UTC6152353Scroll Down To See Video! The DRM C130 RE Rolling Mill is a top quality combination rolling mill enabling metal sheet rolling and metal wire rolling. The mill also benefits from side extensions and the ease of use of Durston’s unrivalled reduction gearbox. Durston mills are constructed from cast iron for optimal strength and rigidity with a reassuring weight to support a lifetime of use and a better-rolled finish. The rolls themselves are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The rollers also include 11 wire grooves ranging from 8mm to 1mm. The bearings are self-lubricating and utterly maintenance-free while the beautifully formed square grooves have been specially designed to produce the best possible rolled finish. The heavy-duty 5-1 gearbox is unrivalled in the industry and makes turning much easier. Behind the cover, you will find two specially formed gears to make rolling even smoother. An extension side roller incorporates four shallow half rounds giving your rolling mill even more versatility. Safety features include a protective guard around the top gears. The DRM C130 Rolling Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,666.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM C130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152353-new-goldpro-durston-drm-c130-combination-flat-wire-130mm-re-rolling-mill47.8 kg45.3KG4102203655-to-1 gearbox116Combination601304, 3, 2, 1.5mm8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77ddd899954fc0974a19addee04e7755/original-Durstons-DRM-C130RERolling-Mill-pic1-1021-510x612-e1571853749120.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/132b7be4b3d4c6a13f13d5fa1601c463/original-Durstons-DRM-C130RERolling-Mill-pic1-1021-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f0275892be536d80324e5d5626fa61d/original-Durston-DRM-C130E-pic3-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f29827709162b9b0e63de15540ea6005/original-Durston-DRM-C130E-pic2-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34e83c13fe2a25f8a326c43ed6492c96/original-Durstons-C130-E-x-60-mills-1021-510x612.jpg2024-09-25 15:41:31 UTC6152354Durston’s DRM range of rolling mills is our best-selling series of mills. It has proven over the years to be a real workhorse in many jewelers’ workshops and factories. The ‘F’ in DRM F stands for ‘flat’, and this rolling mill has been specifically designed to roll flat metal sheeting exclusively. The mill is manufactured from a single piece of cast iron for maximum strength and rigidity, and a lifetime of rolling. The ‘R’ stands for gear reduction and the mill’s maintenance-free bearings combine with a 4-1 gearbox making each roll more straightforward and consistent. With a flat milling width of 100mm, the rollers are created from hardened steel with a diameter of 50mm. Maximum sheet thickness is 5.5mm. The ‘E’ stands for extensions, and the mill benefits from four side extension half rolls of 4, 3, 2 and 1.5 mm. As the world’s foremost manufacturer of rolling mills, Durston products are recognized globally for their reliability, incredibly robust construction and build quality. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,434.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-F100-REPawtucket, RIhttps://www.goldmachinery.com/listings/6152354-new-goldpro-durston-drm-f100-flat-100mm-re-rolling-mill30.3 kg29KG3602003204-to-1 gearbox5.5Flat50100None8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/906a236ac035eaa5cde76b8aec3a432a/original-Durstons-DRM-F100RE-Rolling-Mill-pic1-1013-510x612-e1571856333452.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b358c0ebfa9d2a7ee9e3a3308fed07d6/original-Durstons-DRM-F100RE-Rolling-Mill-pic1-1013-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35c26a7e67aa3d6323a16d20cfeb2945/original-f100-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1113af7a72dcf9561de914052458cf2/original-Durstons-F100-E-x-50-1013-510x612.jpg2024-09-25 15:41:28 UTC6152355Durston’s DRM range of rolling mills is our best-selling series of mills. It has proven over the years to be a real workhorse in many jewellers’ workshops and factories. The mill is manufactured from a single piece of cast iron for maximum strength and rigidity, and a lifetime of rolling. The ‘C’ in C100 stands for ‘combined’ enabling you to mill both metal sheets and metal wires. With a milling width of 100mm, we have created the rollers from hardened steel with a diameter of 50mm. Maximum metal sheet thickness is 5.5mm. The mill benefits from 9 wire grooves enabling wire rolling from 7mm to 1mm. The mill’s maintenance-free bearings make each roll more straightforward and consistent. As the world’s foremost manufacturer of rolling mills, Durston products are recognised globally for their reliability, incredibly robust construction and build quality. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,294.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM C100RPawtucket, RIhttps://www.goldmachinery.com/listings/6152355-new-goldpro-durston-drm-c100r-combination-100mm-rolling-mill-with-extensions30.3 kg24.4KG360200320Direct drive95.5Combination501007mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe061dbdf17aa6c36bad7ecfb8a3b922/original-drm-c100-e-510x612-e1571854454831.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5269aabc88b94862b99576a760ea9bf4/original-drm-c100-e-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2fc4e65b0fc5a0468c2081a986426f8/original-c100-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30a6097b155d9ebac6de99de8e070b78/original-Durstons-C100-E-x-50-1011-510x612-1.jpg2024-09-25 15:41:30 UTC6152356DRM Rolling Mill – DRM C100 R E rolling mill from Durston Tools. The ‘C’ in C100 stands for ‘combined’ enabling you to mill both metal sheets and metal wires. The mill benefits from nine wire grooves enabling wire rolling from 7mm to 1mm. The mill also benefits from four side extension half rolls of 4, 3, 2 and 1.5mm. Durston’s DRM range of rolling mills is our best-selling series of mills. It has proven over the years to be a real workhorse in many jewellers’ workshops and factories. The ‘C’ in C100 stands for ‘combined’ enabling you to mill both metal sheets and metal wires. Manufactured from a single piece of cast iron, we have built the mill for maximum strength and rigidity and a lifetime of rolling. Its maintenance-free bearings combine with a 4-1 gearbox, making each roll easier and consistent. With a milling width of 100mm, we have created the rollers from hardened steel with a diameter of 50mm. Maximum sheet thickness is 5.5mm. The mill benefits from nine wire grooves enabling wire rolling from 7mm to 1mm. The mill also benefits from four side extension half rolls of 4, 3, 2 and 1.5mm. As the world’s foremost manufacturer of rolling mills, Durston products are recognised globally for their reliability, incredibly robust construction and build quality. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,537.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-C100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152356-new-goldpro-durston-drm-c100-combination-flat-wire-100mm-re-rolling-mill30.3 kg29KG3602003204-to-1 gearbox95.5Combination501004, 3, 2, 1.5mm7mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d1045ed14d0775fc2be0d3dded8c3c8/original-Durstons-DRM-C100RE-Rolling-Mill-pic1-1011-510x612-e1571854063500.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b24ced3be935f0b83aff38aa8046bf21/original-Durstons-DRM-C100RE-Rolling-Mill-pic1-1011-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c140ade057d95adbbd415f410785f90d/original-Durston-DRM-C100RE-Rolling-Mill-pic3-1011-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6cb425b27f7a14f62acd8ee35d026ee/original-Durstons-C100-E-x-50-1011-510x612.jpg2024-09-25 15:41:30 UTC6152357Scroll Down To See Video! Model - TRAF A CATENA 1500 S/N TRCAT 6M to 21 YEAR 1998 FEATURES : WIDTH 700 mm. LENGTH 6500 mm. HEIGHT 1290 mm TRACTION POWER 1500 Kg 380V (50Hz) POWER SUPPLY + earth TOTAL ELECTRICAL POWER 2,5 Kw VARIABLE POWER (ON REQUEST) 1st speed 1,8 Kw 2nd speed 2,5 Kw DRAWING SPEED 1st speed 6.5m / min 2nd speed 13m / min LEVEL OF NOISE ON THE WORKPLACE 75 dB (A) Chain Extruder With Variable Speed Drive The characteristics of the die built by us and the simplicity with which they perform the various processing steps make it suitable for drawing wire, barrel and metal pipe, even of large dimensions. Considerable importance was given to the study of the trolley made in order to allow the operator to make the brim of the wire to be drawn and the coupling to the traction chain in two distinct phases without the possibility of error and with one hand; in fact, the lever placed above the trolley blocks the wire on the pliers which give the particularity of working always parallel. Once the thread has been taken, the drawing can be started by pulling the anchorage lever to the chain. The mechanical limit switch automatically releases the drawing. The truck can be called by the operator who, by acting on the button, will operate a special motor for the automatic return of the safety hook. The "galle" type chain is double-edged with plates. The traction is carried out by a geared motor-reducer mounted on the chain return shaft. The die head is equipped with a tray for collecting the lubricating oil, the support of the beams is constructed in such a way as to house a recirculation tank for the oil through an adequate pump. The machine is equipped with accident prevention devices against wire breakage. The traction speed can be fixed or variable. Link to Manufacturer's Website Recently taken from service out of NJ sold as is ex-works RIWire, Plate & TubeWire-Drawing / Bull Blocksused3026-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152357-used-3026-140-croa-power-draw-bench-chain-extruder-1500kg-traction-power-with-variable-speed-drivehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1465a691d185990c4accf6c42e87fc6/original-1-4-e1555070338643.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/506b3542b8ab35dff5408b290f3a968e/original-IMG_1091.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/947a499b209ddbf4eacd429d7ef5f519/original-IMG_1092.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95fbb0f56b8f54ab72236183610fed1b/original-IMG-3512-5-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/304e064f9767e1189fcc811b32b7e708/original-unnamed-16-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15775152046bb09619d580a9c08bede0/original-1-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0acf88aea548955702bcd8e492be64b3/original-2-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5382e8b2aa8a8ed502cad032248b5bab/original-IMG_1082-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8f348c0c34631c5b744a2e38e258ee3/original-IMG_1088-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ad8784a16fa811991db14255598ecfb/original-IMG_1089-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46cde9d075c40227c094520381846c27/original-IMG_1090.jpg2024-09-25 15:41:28 UTC6152358The DRM F130 R Rolling Mill is top quality flat rolling mill with the benefit of Durston’s unrivalled gearbox. Durston’s mills are constructed from cast iron for optimal strength and rigidity with a reassuring weight to support a lifetime of use and give a better-rolled product. The rolls are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The bearings are self-lubricating and wholly maintenance-free and are specifically designed to produce the best possible rolled finish. The heavy-duty 5-1 gearbox is unrivalled in the industry and makes turning so much more comfortable. Behind the cover, you will find two specially formed gears to make rolling even smoother. This mill does not have side extensions (see the DRM F130 R E if you require them). Safety features include a protective guard around the top gears. The DRM F130 R Rolling Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,398.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM F130RPawtucket, RIhttps://www.goldmachinery.com/listings/6152358-new-goldpro-durston-drm-f130r-flat-130mm-rolling-mill-with-gearbox39.3 kg36.8KG4102203655-to-1 gearbox116Flat60130None8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/572c8cc4c096ecb93240670e12768398/original-09-07-2018-17-36-46-6-510x612-2-e1571856201103.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcfa065d3eec0470d9ea638337d5db9f/original-09-07-2018-17-36-46-6-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07eb37fea64fa685d1e8672c481fb436/original-Durstons-Agile-F130-Rolling-Mill-pic4-1030-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1518702746f6665f7e35a70e60b53d47/original-Durstons-F130-x-60-no-ext-1026-1030-510x612-1.jpg2024-09-25 15:41:30 UTC6152359The DRM F130 RE Rolling Mill is a top quality sheet rolling mill with the benefit of side extensions and Durston’s unrivaled gearbox. Durston’s mills are constructed from cast iron for optimal strength and rigidity with a reassuring weight to support a lifetime of use and giving a better-rolled product. The rolls are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The bearings are self-lubricating and wholly maintenance-free and are specifically designed to produce the best possible rolled finish. The heavy-duty 5-1 gearbox is unrivaled in the industry and makes turning much easier. Behind the cover, you will find two specially formed gears to make rolling even smoother. An extension side roller incorporates four shallow half rounds giving your rolling mill even more versatility. Safety features include a protective guard around the top gears. The DRM F130 RE Rolling Mill: part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,666.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM F130REPawtucket, RIhttps://www.goldmachinery.com/listings/6152359-new-goldpro-durston-drm-f130re-flat-130mm-re-rolling-mill47.8 kg45.3KG4102203655-to-1 gearbox116Flat60130& 1.5mm, 2, 3, 48mmAgilehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8d3ccaef2b230d1c131b668dfcdefca/original-Durstons-DRM-F130RE-Rolling-Mill-pic1-1023-510x612-e1571856677320.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f07839463e7f68dd09cce1ad711922dd/original-Durstons-DRM-F130RE-Rolling-Mill-pic1-1023-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b74717120cc1a85ebb341faf163f580d/original-Durstons-Agile-F130-Rolling-Mill-pic4-1030-510x612-2.jpg2024-09-25 15:41:29 UTC6152360GB BertoncelloLINXFurnace for continuous annealing of wires and strips. Highlights: - Maximum quality of the product thanks to the possibility of a repeatable and effective heat treatment - Consistent results - Oxidation-free treatments - Independent working temperature control for each working line (version with more than one working lines) - Independent working speed control for each working line (version with more than one working strands) - Possibility to treat simultaneously in multiple lines profiles of different sections and alloys (version with several working lines). - Total absence of traction-induced tensions in the product during the whole heat treatment. - Low power and gas consumption. - Reduced heat wasting in the working environment. - Active and passive safety - Ergonomic designWire, Plate & TubeWire & Tube MakingnewLinx SeriesItalyhttps://www.goldmachinery.com/listings/6152360-new-goldpro-bertoncello-linx-series-annealing-furnace-for-wire-and-strips1000mm to 1700mm11 to 4Ø 1,2 mm max2 to 11 mm max50 m/min to 70 m/min950° C (standard)4 Kw to 18 Kw1.8 Kw to 2.5 Kw40-20 lt/minhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12595bb01c59b326b12106dab307c2e5/original-Linx-L101-e1507723417517.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd8b27b6d07f26bce906ece615ee03db/original-12323.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/701586dcda684490fb6745f62e849089/original-2221.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6fbec93e8a14e32cb234f2f42a94c2c/original-chart.png2024-11-19 15:04:05 UTC6152361Double Rolling Mill – Double D4 158 rolling mill from Durston Tools. This exceptional rolling mill has two sets of rolls, the top set for flat rolling and the bottom set grooved for square wire rolling. Both sets of rolls also have extension rollers. The top rolls incorporate four half rounds and the bottom rolls an additional three half rounds. The rolling mill is supplied with two turning levers. This exceptional rolling mill has two sets of rolls, the top set for flat rolling and the bottom set grooved for square wire rolling. Both sets of rolls also have extension rollers. The top rolls incorporate four half rounds and the bottom rolls an additional three half rounds. The rolling mill is supplied with two turning levers. The first is used for heavy rolling, and this includes a gear reduction of 11-1. The second turning lever can be used for lighter rolling at twice the speed with a gear ratio of 5-1. Lever changeover takes only a few seconds. The top mill features an extra wide flat area of 158mm between two rollers with a diameter of 60 mm, each enabling a maximum roll thickness of 6 millimetres. The bottom mill has a total of 19 square wire grooves allowing wire rolling from 10mm to 1mm. The side extensions enable half round rolling of 8, 7, 6, 5, 4, 3, 2, and 1.5mm. Safety features include all gearing being covered with plastic housing. The mill itself is constructed from a single piece of cast iron to maximise rigidity and strength, and all rollers are induction hardened to 240 RC to ensure your rolls lasts a lifetime. This is an exceptional workhorse of a rolling mill and will offer years of service. Technical Details: Available Ex-Factory, TN, USA Priced for: $4,135.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewD4-158Pawtucket, RIhttps://www.goldmachinery.com/listings/6152361-new-goldpro-durston-double-d4-158mm-rolling-mill104 kg85KG4202206002.5-to-1 gearbox, 5-to-1, 11-to-1196 & 5mm, 76Combination601581.5, 2, 3, 4, 6 and 8mm10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16e1ff9cd27bf97f15862b9908872f23/original-Durston-D4-158-Rolling-Mill-pic1-1052-510x612-e1571854307329.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4643fe3d31512550654c7806ef1b5b7/original-Durston-D4-158-Rolling-Mill-pic1-1052-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a0ea77994e484f8f36254dfac42169b2/original-Durstons-D4-158-ROlling-Mill-pic1-1052-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0369303a0e447d5c159fc1e8a00333f/original-Durston-D4-158-Rolling-Mill-pic3-1052-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6436417996567ff9f41621f25ef7f32/original-Durstons-Double-D4-158-x-60-lower-mill-1052-510x612.jpg2024-09-25 15:41:31 UTC6152362Durston is proud to be the only manufacturer of round rolling mills. The DMR Round 150 Rolling Mill creates perfect circular wire forms through ten rounded forming grooves with a roller length of 150mm. The mill is constructed from one piece of cast iron for maximum rigidity and strength. The bearings are self-lubricating and maintenance-free and fully support the induction hardened rollers. The rolls themselves provide a large flat rolling surface, as well as the ten rounded groups enabling rolling from 6mm to 1mm. Flat rolling has a maximum width of 6mm. The rolls themselves have a diameter of 60mm. This mill provides direct drive without a gearbox and does not feature side extensions, which are available through other models within the range Technical Details: Available Ex-Factory, TN, USA Priced for: $1,813.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-R150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152362-new-goldpro-durston-drm-round-150mm-rolling-mill49.8 kg47.3KG4302202655-to-1 gearbox186Round60150& 1.5mm, 2, 3, 410mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9af5cc273d86572c31a3cf9c4162411f/original-Durstons-DRM150-ROUND-Rolling-Mill-pic1-1045-510x612-e1571853336740.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4abab696aac89c4ed2eb9cf6a3ac2602/original-Durstons-DRM150-ROUND-Rolling-Mill-pic1-1045-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69ded4fbe35b4f4fb584e81948a173be/original-Durstons-C150-E-x-60-round-mill-1045-510x612.jpg2024-09-25 15:41:31 UTC6152363Scroll Down To See Video! The DRM C130 R Rolling Mill is top quality combination rolling mill enabling metal sheet rolling and metal wire rolling with the benefit of Durston’s unrivalled gearbox. Durston’s mills are constructed from cast iron for optimal strength and rigidity with a reassuring weight to support a lifetime of use and giving a better-rolled product. The rolls themselves are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The rollers also include 11 wire grooves ranging from 8mm to 1mm. The bearings are self-lubricating and are entirely maintenance-free, while the beautifully formed square grooves have been specially designed to produce the best possible rolled finish. The heavy-duty 5-1 gearbox is unrivalled in the industry and makes turning so much more comfortable. Behind the cover, you will find two specially formed gears to make rolling even smoother. Safety features include a protective guard around the top gears. The mill has no side extensions. The DRM C130 R Rolling Mill part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,294.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-C130RPawtucket, RIhttps://www.goldmachinery.com/listings/6152363-new-goldpro-durston-drm-c130r-combination-130mm-rolling-mill-with-gearbox39.3 kg36.8KG4102203655-to-1 gearbox116Combination60130None8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ead4ec93192f860bef4d7425b60fc6a/original-Durstons-DRM-C130R-Rolling-Mill-pic1-1025-510x612-e1571855061890-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c3654175c3157ab434478de41d65879/original-Durstons-DRM-C130R-Rolling-Mill-pic1-1025-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67c212c2a90a610a8e6d75a6554c15c3/original-Durstons-Agile-C130-Rolling-Mill-pic3-1029-510x612-2.jpg2024-09-25 15:41:31 UTC6152364Scroll Down To See Video! Durston’s DMR C150 RE is a top of the range rolling mill for any jewelry professional. The mill is constructed from one piece of cast iron for maximum strength and rigidity. The roller length of 150mm, significantly wider than in most mills, gives extra space for a large flat rolling area, as well as 11 wire grooves. Each roller is specially induction hardened to 64 RC. The maximum thickness for flat rolling is 6mm, and the 11 square wire grooves range from 8mm to 1mm. The maintenance-free and self-lubricating bearings are protected with a plastic cover and support the rollers, which are essential for a perfect finish. The mill also includes four half round side extensions of 4, 3, 2 and 1.5mm. Each roll is made effortless with Durston’s industry-beating 5-1 gearbox which provides smooth power and transition through each turn. Safety features include a plastic moulding covering the top gears. This rolling mill is for the high-performance jewelry manufacturer who expects more from her tools. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,973.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-C150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152364-new-goldpro-durston-drm-c150-combination-flat-wire-150mm-r-e-rolling-mill49.8 kg47.3KG4302203655-to-1 gearbox116Combination601504, 3, 2, 1.5mm8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b189746ee264fae1695a512627e370b/original-Durstons-DRM-C150RE-Rolling-Mill-pic1-1031-e1571845997405.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/995319dcf299ba57f119bfbf3114c601/original-Durstons-DRM-C150RE-Rolling-Mill-pic1-1031-1-853x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d78968d1cc90c76c472d2365c0a25da/original-150-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18ced01b4f1707ae0ffa8d74c17967e6/original-DRM-C150-RE-mills-1031-510x612.jpg2024-09-25 15:41:32 UTC6152365Scroll Down To See Video! When you take delivery of your new Durston Agile C110 Rolling Mill, you are getting a top quality manufacturing tool. The all-new Agile C110 is a special edition to the range of Durston rolling mills, coming from the same stable as the DRM C100 RE. It is lighter than the DRM range by having finer frames, but it is designed to support the load without any compromise on quality. A traditional T-bar replaces the hand wheel, and you will find four half rounds as part of the primary roller. The rolls are specially induction hardened to 64 RC and the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The Agile C110’s bearing block is fully supported, and the bearings are self-lubricating and completely maintenance-free. The beautifully formed square grooves have been specially designed to produce the best possible rolled finish. Also, the flat part of the roll has not only been finely ground but polished as well to ensure perfectly rolled products. The heavy duty 4-1 gearbox is unrivalled in the industry and makes turning effortless. Behind the cover, you will find two additional gears to make rolling even smoother. Safety features include a protective guard around the top gears. The Agile C110 Rolling Mill: part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $863.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewC110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152365-new-goldpro-durston-c110-agile-combination-110mm-rolling-mill28.5 kg26KG3452003204-to-1 gearbox92, 3, 4, 5mm5.5Combination50110None7mmAgilehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/352486af8d29c6d57c5456a57d0bb1fe/original-Durstons-Agile-C110-Rolling-Mill-pic1-1019-510x612-e1571853098503.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07b638f12e71bd93ddeace97b1738fa6/original-Durstons-Agile-C110-Rolling-Mill-pic1-1019-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dab97942def43f77478d5f19c7ff52f2/original-Durstons-Agile-C110-Rolling-Mill-pic5-1019-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b876ceca7ced29fbf3cc71c3437d26d/original-Durstons-Agile-C110-Rolling-Mill-pic4-1019-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab279cadc08f34a7f499813f7241af29/original-Durstons-Agile-C110-Rolling-Mill-pic3-1019-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a12bfec6e6d92257f3c83400fe7a6714/original-Durstons-Agile-C110-x-50-No-Ext-1029-510x612.jpg2024-09-25 15:41:32 UTC6152366Scroll Down To See Video! The all-new Agile 130 Rolling Mill is a special edition to the range of Durston rolling mills, coming from the same stable as the bestselling combination mills such as the DRM C130 RE. It is lighter by having thinner frames, but where the mill needs its strength, it’s entirely designed to support the load without any compromise on quality. A traditional T-bar replaces the hand wheel, and you’ll find five half rounds as part of the primary roller. The rolls are specially induction hardened to 64 RC. The main barrel has a depth of 6mm ensuring your rolls last a lifetime. The Agile 130’s bearing blocks are fully supported to give the best possible rolled finish. The bearings are self-lubricating and completely maintenance-free, while the beautifully formed square grooves have been specially designed to produce the best possible rolled finish. Behind the cover, you’ll find two specially constructed gears to make rolling even smoother. Safety features include a protective guard around the top gears. The Agile 130 Rolling Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,125.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewAgile C130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152366-new-goldpro-durston-agile-c130-combination-130mm-rolling-mill42.7 kg39.7KG4102203655-to-1 gearbox112. 3. 4. 5. 6mm6Combination60130None8mmAgilehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4a326c82982f3e30a041de4475d4529/original-Durstons-Agile-C130-Rolling-Mill-pic1-1029-510x612-2-e1571853590351.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/759e8b51f2adba19bbb76ea697152a62/original-Durstons-Agile-C130-Rolling-Mill-pic1-1029-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdc12f357c5bc3f7c3e73238087829f4/original-Durstons-Agile-C130-Rolling-Mill-pic2-1029-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15690e45d8589b77a6908c2135c37e7b/original-Durstons-Agile-C130-Rolling-Mill-pic3-1029-510x612.jpg2024-09-25 15:41:31 UTC6152367The Double D2 Rolling Mill from Durston is a different mill featuring two sets of rolls; one for flat rolling (having side extension rollers incorporating four half rounds) and the other grooved for the square wire rolling. The excellent gear ratios offer 7-1 load reduction on flat rolling and 3.5-1 for wire rolling, and enables a smooth manual operation with minimal effort. The extra-wide flat area means a full 130mm rolling surface is accessible, while the grooved rollers provider 19 square wire grooves ranging from 10mm to 1mm. The side extensions provide four half rounds in 4, 3, 2 and 1.5 mm. This mill is Durston’s first incorporating roller bearings. For additional safety, all gearing is covered with plastic housing and the large, easy-read calibrated discs and guide plates ensure safe operation through this mill’s long lifetime. Technical Details: Available Ex-Factory, TN, USA Priced for: $2,956.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDouble D2 130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152367-new-goldpro-durston-double-d2-130mm-rolling-mill93 kg74KG4202205657-to-1 & 3.5-to-1 gearbox196mmCombination601304, 3, 2, 1.5mm10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43b764a5720d195413aadebd311d91a2/original-Durston-D2-130-Rolling-Mill-pic1-1051-510x612-e1571857021310.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85165cb0a91248459195ac4dfbdc858c/original-Durston-D2-130-Rolling-Mill-pic1-1051-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e6e798d499a6ef224d21523700c1996/original-Durstons-D2-130-Rolling-Mill-pic1-1051-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d707ace52e57e9f6c20c77029f7476c/original-Durston-D2-130-Rolling-Mill-pic3-1051-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f138d0cba9f5bde543dd3a6801c96c8a/original-Durstons-F130-E-x-60-1013-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c998a7aeae0a0bf38faf1f24d7bbad7/original-Durstons-W130-x-60-no-ext-mills-510x612.jpg2024-09-25 15:41:33 UTC6152368DRM Rolling Mill – DRM 150 Corrugated rolling mill from Durston Tools. The mill is constructed from one piece of cast iron for maximum strength and rigidity. The roller length of 150mm, significantly wider than in most mills, gives extra space for rolling. Each roller is specially induction hardened to 64 RC. Technical Details: Available Ex-Factory, UK Priced for: $1,939.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM 150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152368-new-goldpro-durston-drm-150mm-corrugated-rolling-mill45 kg5-to-1 gearbox6mmCombination601304, 3, 2, 1.5mm10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/893402823e378ac08ef68a222364c6aa/original-DRM150-corrugated-1034-510x612-e1571857158622.jpg2024-09-25 15:41:32 UTC6152369As the world’s foremost manufacturer of rolling mills, Durston’s mills are recognised globally for their reliability, incredibly robust construction and build quality. The Mini C80 rolling mill with side extensions is no exception and has been manufactured in a one-piece cast iron construction for optimal strength and rigidity. It is compact but still with everything you need and has precision hardened and ground rolls to 64RC. It has maintenance-free bearings and has large, easy-to-read calibrated discs. The side extension rollers come with four half rounds. The C80 has nine wire shaping rollers ranging from 6.5mm to 1mm. The width of the rollers is 80mm with a diameter of 45mm and can take metal sheets up to 5mm thick. The mill also benefits from four side extension half rounds of 4, 3, 2 & 1.5 mm. The entry-level C80 rolling mill from Durston: part of the award-winning Durston product range since 1961. We recommend that your Durston rolling mill be securely fastened down for safety, and we have a variety of stands which are ideally suited for this purpose. Technical Details: Available Ex-Factory, TN, USA Priced for: $736.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewMini C80Pawtucket, RIhttps://www.goldmachinery.com/listings/6152369-new-goldpro-durston-mini-c80-rolling-mill-80mm-with-side-extensions16.2 kg15.1KG255170265Direct drive45Combination45804, 3, 2, 1.5mm6.5mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bed955d9104bdb057fc338dc20bb49f/original-Durstons-MINI-C80-ECO-Rolling-Mill-with-extensions-pic1-1001-510x612-e1571854668624.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98ba234bfca353ffd81f8b7d63d9ec96/original-Durstons-MINI-C80-ECO-Rolling-Mill-with-extensions-pic1-1001-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99d94f9140b79e6dc0bb235f26c93d14/original-c80-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc025062f42b66362f37a9eb2da69475/original-Durstons-Mini-C80-x-45-mills-1001-510x612.jpg2024-09-25 15:41:32 UTC6152370The DRM W130 E Rolling Mill is a top quality wire rolling mill with the benefit of side extensions. The rolling mills are dedicated to wire rolling and so do not have a flat milling area for sheet rolling. Durston Mills are constructed from cast iron for optimal strength and rigidity with a reassuring weight to support a lifetime of use and giving a better-rolled product. The rolls are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The bearings are self-lubricating and wholly maintenance-free and are specifically designed to produce the best possible rolled finish. The rolls include 11 square wire grooves ranging from 10mm to 1 mm. Behind the cover, you’ll find two specially formed gears to make rolling even smoother. A side roller incorporates four shallow half rounds giving your rolling mill even more versatility. Safety features include a protective guard around the top gears. The DRM W130 E Rolling Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,418.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewDRM-W130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152370-new-goldpro-durston-drm-w130-wire-130mm-rolling-mill-with-extensions39.3 kg36.8KG3352203655-to-1 gearbox116Wire601304, 3, 2, 1.5mm8mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3915d36d7fcbd3d536af2da895e42815/original-Durston-DRM-W130E-Rolling-Mill-pic1-1024-510x612-e1571854881770.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0d741fea09a42e089b2ee4f0180304f/original-Durston-DRM-W130E-Rolling-Mill-pic1-1024-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5799a1bc8bca4f576b1d529316e3ca99/original-DRMW130E-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6591939deaada799b3e5ffb8cf6d7ed6/original-w130-e-510x646.jpg2024-09-25 15:41:32 UTC6152371Scroll Down To See Video! Durston’s massive capacity Agile C165 continues the Durston tradition of super strong design to support each load effortlessly, with no compromise on quality. You’ll find 5 half-rounds as part of the main roller with a huge 85mm flat area and 11 square grooves. The Agile C165 matches the rest of the Durston range with rolls that are specially induction hardened to 64 RC and the main barrel to a depth of 6mm, giving you a lifetime of service. Durstons are proud to manufacture all our rolling mills in-house to ensure strict quality control. We machine, harden and grind the rolls in our High Wycombe factory. The bearing blocks are fully supported, self-lubricating and completely maintenance-free – giving the best possible rolled finish. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,319.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewAgile C165Pawtucket, RIhttps://www.goldmachinery.com/listings/6152371-new-goldpro-durston-agile-c165-combination-165mm-rolling-mill42.7 kg39.7KG4352203655-to-1 gearbox113 & 2mm, 4, 5, 6Combination60165None8mmAgilehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84dcbcc2d7d440a03340c7c8f396d8c1/original-agilc165-1039-510x612-e1571856504161.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a553f3e7f56cdce5e2c1d213fec65b31/original-agilc165-1039-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1809ccf92c556977ccbc4530ff537258/original-agilc165-1039-2-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2721ba79b28c34697472d844d65ddd1/original-agilc165-1039-3-510x612.jpg2024-09-25 15:41:33 UTC6152372Scroll Down To See Video! Durston’s massive capacity Agile F165 continues the Durston tradition of super strong design to support each load effortlessly, with no compromise on quality. The Agile F165 matches the rest of the Durston range with rolls that are specially induction hardened to 64 RC and the main barrel to a depth of 6mm, giving you a lifetime of service. Durstons are proud to manufacture all our rolling mills in-house to ensure strict quality control. We machine, harden and grind the rolls in our High Wycombe factory. The bearing blocks are fully supported, self-lubricating and completely maintenance-free – giving the best possible rolled finish. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,357.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewAgile F165Pawtucket, RIhttps://www.goldmachinery.com/listings/6152372-new-goldpro-durston-agile-f165-flat-165mm-rolling-mill42.7 kg39.7KG4352203655-to-1 gearboxFlat60165NoneAgile112. 3. 4. 5. 6mm6mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8b3c9bdefe2aa6da2f55fed90ce50a5/original-agilcF165-1040-510x612-e1571856888798.jpg2024-09-25 15:41:32 UTC6152373The Mini C80 Rolling Mill without side extensions is no exception and has been manufactured in a one-piece cast iron construction for optimal strength and rigidity. It is compact but still with everything you need and has precision hardened and ground rolls to 64RC. It has maintenance-free bearings and has large, easy-to-read calibrated discs. The C80 has nine wire shaping rollers ranging from 6.5mm to 1mm. The width of the rollers is 80mm with a diameter of 45mm and can take metal sheets up to 5mm thick. This rolling mill has no side extensions added to the core product. The entry-level C80 rolling mill from Durston: part of the award-winning Durston product range since 1961. As the world’s foremost manufacturer of rolling mills, Durston’s products are recognised for their reliability, incredibly robust construction and build quality. We recommend that your Durston rolling mill be securely fastened down for safety, and we have a variety of stands which are ideally suited for this purpose. Technical Details: Available Ex-Factory, TN, USA Priced for: $785.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewMini-C80Pawtucket, RIhttps://www.goldmachinery.com/listings/6152373-new-goldpro-durston-mini-c80-rolling-mill-80mm16.2 kg15.1KG255170265Direct drive95Combination4580None6.5mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8fd0ae8b1b37a0f5c4e0c8a1e8a6597/original-c80-mini-mill-510x612-e1571855572220.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d69b697d1c0ce5f8c7c3a3cdcba75235/original-c80-mini-mill-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f795280d141101cd93e7ffad0fecfbe/original-Durstons-Mini-C80-Eco-no-ext-1000-510x612.jpg2024-09-25 15:41:32 UTC6152374Scroll Down To See Video! The all-new Agile F130 Rolling Mill is a special edition to the range of Durston rolling mills, coming from the same stable as the bestselling combination mills such as the DRM F130. It is a dedicated sheet rolling mill and features no wire milling grooves on the main rollers. It is lighter by having thinner frames, but where the mill needs its strength, it’s entirely designed to support the load without any compromise on quality. A traditional T-bar replaces the hand wheel, and you’ll find five half rounds as part of the primary roller. The rolls are specially induction hardened to 64 RC, the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The Agile F130’s bearing blocks are fully supported which is essential to give the best possible rolled finish. The bearings are self-lubricating and wholly maintenance-free and to produce the best possible rolled finish. Behind the cover, you’ll find two specially formed gears to make rolling even smoother. Safety features include a protective guard around the top gears. The Agile F130 Rolling Mill is part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $1,095.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewAgile F130Pawtucket, RIhttps://www.goldmachinery.com/listings/6152374-new-goldpro-durston-agile-f130-130mm-flat-rolling-mill42.9 kg39.9KG4102203655-to-1 gearbox6Flat60130NoneAgile10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4f6bcb366bdfdc48de236786de292f4/original-Durstons-Agile-F130-Rolling-Mill-pic1-1030-510x612-e1571855991852.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86f15d2648d2692d6dfc8e23b21a59ce/original-Durstons-Agile-F130-Rolling-Mill-pic1-1030-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8df6b27da514052505c0b08954833de/original-Durstons-Agile-F130-Rolling-Mill-pic4-1030-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91a10ffad89a81469dc15717572321b9/original-Durstons-F130-x-60-no-ext-1026-1030-510x612.jpg2024-09-25 15:41:28 UTC6152375Ex-Factory, Italy Priced for €9.400,00 Packaging (fumigated Wooden Box) €400,00 *Pricing Updated May 2014General Jewelry MachineryRings, Bands & BanglesusedPawtucket, RIhttps://www.goldmachinery.com/listings/6152375-used-new-goldpro-gb-meccanica-oval-calender-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4995ad4a9f8cf988bd72d1bf92dc898/original-gbmecc.png2024-09-25 15:41:32 UTC6152376220V/1PH/60HZ Amps 25 S/N 1009 Casting sizes: up to 2" x 1/4" thick strip one rod up to 1/4" diameter Heating time: operating temperature reachedbetween 45 - 90 minutes depending on alloy 2" x 1/8" strip at casting speed of 8"/minute would produce 10 kgs. In approximately 15 minutes Daily output: Strip up to 30 kgs. Rod up to 16 kgs. Part changes: Equipped With: Factory cabinet stand Additional heating elements SCR Power systems / manual crucible and graphite as photographedGeneral Jewelry MachineryCasting Machines & Equipmentused5987-180Pawtucket, RIhttps://www.goldmachinery.com/listings/6152376-used-5987-180-ewencast-continuous-casting-machine-model-micro-caster10 kgs. Gold(2) 4" rollers, positive driveexample10 minutes(at operating temperature)1 hour if caster is hot20 minutes(at operating temperature)30" x 40"700 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e08d60a4dbf8500b9378646cbfe25802/original-1-e1660578240445.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b4cf94e3dfca5bebf2c205a8780397b/original-IMG_5874-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17650a056250ae2a1a0a00d90103b893/original-IMG_5875-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3581ab53249949807ea69f42c8ee33dd/original-IMG_5877-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b7cc1420e5ed57c12caf7c8a93f47c0/original-IMG_5878-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23081d2e84b522a1a0b612e8767e6844/original-IMG_5879-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5eef5a0b1ca87d2d16f26b0baebc6182/original-IMG_5880-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa47ced36459b24165ca6d0a4ffb2847/original-IMG_5881-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba3bd3b9d05f187bb507afb6f4848749/original-IMG_5882-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/147a089383b2b98fc07afc70207d90d4/original-IMG_5884-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a30fc883e31dccd1cddfde11deb1c58c/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36543171568d4901d3e8b1787605bea3/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e34b454373300cbcca2dcb5c37dbc04/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82b2646302c0f3d579f6a90b9dbd0e79/original-IMG_5872-1024x768.jpg2024-09-25 15:41:39 UTC615237721600.0Semiautomatic drilling machine for rings and bangles mod. SIM 1 with one controlled axis, suitable to drill and create diamond site on wedding-rings and bangles. The machine is fitted out with a strong treated cast-iron structure, one high precision spindles complete with tool holder with 6,00 mm Ø pincer and inverter for speed adjustment, a motorized dividing unit revolving at 90° electronically indexed. The machinery is complete with base, electric and electronic plant, display + programming key-board, optical layer, service spanners, CE 2006/42 certification. Equipped With: Optionals: Protection cover € 1.500,00 Steel pincer complete with tie-rod for wedding-rings € 500,00 Steel pincer complete with tie-rod for bangles € 500,00 Set of reductions for outside wedding-rings (22 pcs.) € 550,00 Set of reductions for outside bangles (4 pcs.) € 360,00 Universal chuck (0,5 - 6,5) € 130,00 Widia pointed tool Ø 1,1 € 140,00 Wooden case packing € 670,00 Ex-Factory ItalyGeneral Jewelry MachineryRings, Bands & BanglesnewOMPAR SIM 1Pawtucket, RIhttps://www.goldmachinery.com/listings/6152377-new-ompar-model-sim1-semi-automatic-drilling-machine-for-rings-and-bangles230V 50/60 Hz 1-phase145x120x(H)194 cm.- Gross weight Kg. 470 - Net weight Kg. 340https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c7f71b5603d5a89debef4b45e9af5ae/original-ics-e1352821205938.png2024-09-25 15:41:33 UTC6152378HEIGHT 1600 mm. WIDTH 800 mm. LENGTH 800 mm. MIN. WEDDING RING DIAMETER 13 mm. MAX. WEDDING RING DIAMETER 23 mm. MAX. WEDDING RING WIDTH 13 mm. DIAMETER OF THE ROLLING SHAFT 8 OR 10 mm. DIAMETER OF THE ROLLING WHEEL 115 mm. PRESSURE COMPRESSED AIR 5 Atm. FEEDING 380 + N + T POWER 2 kW. WEIGHT 380 Kg. WEIGHT WITH PACKING 480 Kg. This machine has been specifically planned for producing wedding rings of different shapes ( half - round, flat etc. ) with the internal diameter fixed in advance. For this pur- pose, we have used, as electronic plant of check, a gear- case (COMPUTER), which is able to control all the ma- chine functions. All this allows to check the internal diameter of the wedding ring, the number of the wanted pieces and the complete working cycle ( including the lood and the un- lood of the pieces ). The machine workings are essentially two : automatic and manual. When you use the machine in the manual working, It is possible to program only one size and it is unprovided of the automatically lood cycle of the piece. When you use the machine in the automatically working, it is possible to program more than one size to work and the number of the pieces for each size you want. This cycle is completely controlled from the computer, so that, once you put the information and the pieces in the automatically looder, you do not need the operator. When the working phase is finished, the machine will stop itself. KINDLY WE NEED TO KNOW THE SIZE of the WIDTH AND WEIGHT OF THE RING IN ORDER TO COMPLETE THE QUOTATION WITH THE RIGHT TOOLINGS. Ex- Factory, ItalyGeneral Jewelry MachineryRings, Bands & BanglesnewFIG66Pawtucket, RIhttps://www.goldmachinery.com/listings/6152378-new-goldpro-automatic-rolling-mill-for-wedding-rings-equipped-with-computerQt. Articles Description Price € PACKING10 SPILA00000200 STEEL WITH POINT AND COMFORT Each size 429 https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10bddcaf275883191dbc778ef7479d21/original-LAMFEAC-ING-1-e1476374707287.jpg2024-09-25 15:41:32 UTC6152379Bench Model, less motorGeneral Jewelry MachineryRings, Bands & Banglesused1739-146Pawtucket, RIhttps://www.goldmachinery.com/listings/6152379-used-1739-used-checkerboard-watch-bracelet-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a11e915b7b656d08b9c5ad1557a8952/original-1739.jpg2024-09-25 15:41:33 UTC6152380115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0423-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152380-used-0423-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbcc156ef59c37e87b76d8f716fda52/original-IMG_2254.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpg2024-09-25 15:41:35 UTC6152383115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0422-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152383-used-0422-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpg2024-09-25 15:41:34 UTC6152384110V/1PH/60HZ Top loading type Capacity; 9" or 12" molds Equipped With: Speed control Brake Air clamping system Pneumatic safety door control Metal stand About: Rubber Mold Metal Casting machine for the jeweler/craftsman,to produce fishing lures, jig, sinkers and Jewelry related items -Belt Buckles. This single top load workstation is for the production of parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead). We have much more available equipment including Charles Hones pewter melting furnaces, vulcanizing units, Mold frames 9",10" and 12" in stock at Gold Machinery Rhode island's one stop shop.General Jewelry MachineryCasting Machines & Equipmentused3540-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152384-used-3540-310-9-12-romanoff-centrifugal-white-metal-casting-machine-for-jewelry-fishing-jigs-more3"1/2 HP24" x 24" x 48" high300 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d795f81d7cc4a1e26c8df88dbab4e8cd/original-IMG_3290-2-e1631624387989.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bd03d3b97d0b5b1711996f302222155/original-IMG_3293-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06ac66561a10236a70571ec94c0aaebc/original-IMG_3290-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a963e28b78678c44df060d09bf56c0ad/original-IMG_3291-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bdd134ffcff41585670f9038db0aa35/original-IMG_3292-768x1024.jpg2024-09-25 15:41:35 UTC6152385Scroll Down To See Video! The Durston Agile F110 Rolling Mill is a top quality manufacturing tool. The F110 is a dedicated flat rolling mill for metal sheet rolling and does not include wire rolling grooves or side extensions. The all-new Agile F110 is a special edition to the range of Durston rolling mills. It is lighter than the DRM range by having finer frames, but it is designed to support the load without any compromise on quality. A traditional T-bar replaces the hand wheel, and the rolls are specially induction hardened to 64 RC and the main barrel to a depth of 6mm ensuring your rolls last a lifetime. The Agile F110’s bearing block is fully supported, and the bearings are self-lubricating and completely maintenance-free. The rolls are not only finely ground but polished to ensure a perfectly rolled finish. The heavy duty 4-1 gearbox is unrivalled in the industry and makes turning so much more effortless. Behind the cover, you will find two additional gears to make rolling even smoother. Safety features include a protective guard around the top gears. The Agile F110 rolling Mill: part of Durston’s award-winning range of products available since 1961. Technical Details: Available Ex-Factory, TN, USA Priced for: $940.00 USD Note: Price Subject to Change Without NoticeGeneral Jewelry MachineryGoldPro® Durston Manual Powered Rolling MillsnewAgile F110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152385-new-goldpro-durston-agile-f110-flat-110mm-rolling-mill28.5 kg26KG3452003204-to-1 gearbox5.5Flat50110NoneAgilehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5b2e69338dd386d09eb52285c56670e/original-Durstons-Agile-F110-Rolling-Mill-pic1-1020-510x612-e1571857307847.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d9c9e395092aca7ac07cbe3f6035dec5/original-Durstons-Agile-F110-Rolling-Mill-pic1-1020-510x612-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e602aa7a1e30737f53c8862bc569e91/original-Durstons-Agile-F110-Rolling-Mill-pic3-1020-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06e3769e7d56a676d5d2d15241d30f63/original-Durstons-Agile-F110-Rolling-Mill-pic2-1020-510x612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/967de9375f56bb6fc065d93b3e1de611/original-Durstons-Agile-F110-x-50-mills-1020-510x612.jpg2024-09-25 15:41:33 UTC6152386110V/1PH/60HZ Top loading type Mold Capacity; 18" by 5" thick Equipped With: Wall mount controls Digital RPM reader Analog controls, temp. and timer Brake Air clamping system Metal stand About: Rubber Mold Metal Casting machine for the jeweler/craftsman,to produce fishing lures, jig, sinkers and Jewelry related items -Belt Buckles. This single workstation is for the production of large parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead).General Jewelry MachineryCasting Machines & Equipmentused4464-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152386-used-4464-310-frank-pertot-18-centrifugal-white-metal-casting-machine-for-jewelry-fishing-jigs-more1/2 HP32" x 30" x 50" high380 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f30963683afeba7cdbb5492fd96d6bcb/original-IMG_2131-e1619702336401.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6aa2058a56fb42954247144a3d3b3ec0/original-IMG_2136-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2019b3545687480debdb8a7082480a4/original-IMG_2137-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c47de270a0662eb462c620f5b2f9d1b/original-IMG_2139-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d6c05db99b412cb0503cd70ac40ea52/original-IMG_2131-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/014442eb94994fcab122e51272bd70ad/original-IMG_2132-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9effb07794b029af263cb030d17a76d3/original-IMG_2133-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f2cffcad8635e15a083313a0ce85e39/original-IMG_2134-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/351fc23b3bf0fc945111d0018232e702/original-IMG_2135-768x1024.jpg2024-09-25 15:41:36 UTC6152387115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0411-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152387-used-0411-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d249cce5c3308d4dc06892546bd38d07/original-IMG_2250.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbcc156ef59c37e87b76d8f716fda52/original-IMG_2254.jpg2024-09-25 15:41:36 UTC6152389115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0417-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152389-used-0417-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d249cce5c3308d4dc06892546bd38d07/original-IMG_2250.jpg2024-09-25 15:41:35 UTC6152390For Rings Additional Photos:General Jewelry MachineryRings, Bands & Banglesused1023Pawtucket, RIhttps://www.goldmachinery.com/listings/6152390-used-1023-new-orogold-model-12-23-120-hand-operated-forming-rollshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cde4902725602582fa74a75639eee013/original-1023.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37ba6e661e94a6cd75185f0904b78924/original-1023-1.jpg2024-09-25 15:41:33 UTC6152391115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0407-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152391-used-0407-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbcc156ef59c37e87b76d8f716fda52/original-IMG_2254.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d249cce5c3308d4dc06892546bd38d07/original-IMG_2250.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpg2024-09-25 15:41:37 UTC6152392115V/1PH Wax Injector: Equipped With: Auto clamping Yasui pressure controllerGeneral Jewelry MachineryCasting Machines & Equipmentused0426-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152392-used-0426-310-yasui-auto-clamp-wax-injector-system-for-jewelry-casting10-5/8" x 6-1/2" x 13-1/4" H5"(w) x 7-1/4" H3-1/2"(L) x 3"(W) x 1-1/2"H1 second - 30 minutes2-3/4 quarts (5-1/2 lbs.)10-1/2" diameter x 14" high29 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc4c1354885e4c035f2cf0f3a2ca5f4e/original-IMG_2330-e1556825308321.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c297a27502419e70522a915e437434a0/original-IMG_2332.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d197fcfba9c3cef93133f09c635e1304/original-IMG_2330-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b85da5e795345c1c8ddb4f6998c68bc/original-IMG_2331.jpg2024-09-25 15:41:37 UTC6152394115V/1PH Wax Injector: Equipped With: Auto clamping Yasui pressure controllerGeneral Jewelry MachineryCasting Machines & Equipmentused0424-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152394-used-0424-310-yasui-auto-clamp-wax-injector-system-for-jewelry-casting10-5/8" x 6-1/2" x 13-1/4" H5"(w) x 7-1/4" H3-1/2"(L) x 3"(W) x 1-1/2"H1 second - 30 minutes2-3/4 quarts (5-1/2 lbs.)10-1/2" diameter x 14" high29 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42c50465ec4564c4bec552e30cac5e27/original-1-2-e1556824925685.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8abc539640d59d8435d7ccc5f3be8bf/original-1-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69fa0279b1373d30c897aa67493c6d59/original-IMG_2347.jpg2024-09-25 15:41:37 UTC6152395115V/1PH Wax Injector: Equipped With: Auto clamping Yasui pressure controllerGeneral Jewelry MachineryCasting Machines & Equipmentused0427-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152395-used-0427-310-yasui-auto-clamp-wax-injector-system-for-jewelry-casting10-5/8" x 6-1/2" x 13-1/4" H5"(w) x 7-1/4" H3-1/2"(L) x 3"(W) x 1-1/2"H1 second - 30 minutes2-3/4 quarts (5-1/2 lbs.)10-1/2" diameter x 14" high29 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c076d084d799f5bb7a002a3634461347/original-IMG_2339-e1556825027882.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/285ad1feb742c79404bb2c632a8e7ebb/original-IMG_2339-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/548c8ab6af9c3e7591712ae5777eeb6c/original-IMG_2340.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8908e677b4ea64a09e7805849f78cbf0/original-IMG_2341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cab61da111f98fc6a43b9aca0e05981/original-IMG_2343.jpg2024-09-25 15:41:38 UTC6152396115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0408-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152396-used-0408-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d249cce5c3308d4dc06892546bd38d07/original-IMG_2250.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbcc156ef59c37e87b76d8f716fda52/original-IMG_2254.jpg2024-09-25 15:41:37 UTC6152397115V/1PH Wax Injector: Equipped With: Auto clamping Yasui pressure controllerGeneral Jewelry MachineryCasting Machines & Equipmentused0428-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152397-used-0428-310-yasui-auto-clamp-wax-injector-system-for-jewelry-casting10-5/8" x 6-1/2" x 13-1/4" H5"(w) x 7-1/4" H3-1/2"(L) x 3"(W) x 1-1/2"H1 second - 30 minutes2-3/4 quarts (5-1/2 lbs.)10-1/2" diameter x 14" high29 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6a95e4c3f91f20433f5dbcff347e0c1/original-IMG_2398-1-e1556889109341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13acb2b0fcfbf6559f8db45948e5b4c5/original-IMG_2398-1-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c45dc3d5ca6cd8ad52d78ecb4e34f448/original-IMG_2399-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8c7ac6a41311a8e5f641c374a6a5667/original-IMG_2400-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/757de1ccf9ce254ec5f2f2588e51b931/original-IMG_2401.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f5cf5c4d4b33c6b986b0e7829592cd5/original-IMG_2403.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d19b972ad1349a83bdf4f128404bf03/original-IMG_2404.jpg2024-09-25 15:41:38 UTC6152398Available Ex-Factory, ChinaGeneral Jewelry MachineryRings, Bands & BanglesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152398-new-goldpro-semi-auto-ring-making-with-plasma-welder-machineCOMMODITY & DESCRIPTION QUANTITY UNIT PRICESemi-Auto Ring Making with Plasma Welder Machine Wire Size: 0.2 – 0.50MM ( including One complete set Tooling ) Semi-Auto Ring Making with Plasma Welder Machine Wire Size: 0.5 – 1.00MM ( including One complete set Tooling ) 01 01 5,700 6,300Complete set Tooling form ( 0.2 – 0.50mm ) Complete set Tooling form ( 0.5 – 1.00mm ) 01 01 800.00 960.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c71fbf81445f3b1c9abe16498e4dbd79/original-113.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acb1e0403790354fa40ebb487718d5fc/original-221.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c74cc11fd5a15c2297a3e9cb19950f15/original-331.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5732788318077e8970fe52d6abc1e297/original-44.png2024-09-25 15:41:32 UTC6152399115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0409-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152399-used-0409-310-wax-mold-injector-jewelry-casting-machine2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c742677a3af08bd1a10b1b74ea731bb6/original-IMG_2252-e1574103165341.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d7c58c9aead242a00078ca42d218536/original-IMG_2253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ada1eb885eadab8277fb982f535c8a11/original-IMG_2252-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17b374c375f91242bfa332f2a4f18486/original-IMG_2251.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d249cce5c3308d4dc06892546bd38d07/original-IMG_2250.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fbcc156ef59c37e87b76d8f716fda52/original-IMG_2254.jpg2024-09-25 15:41:37 UTC6152400110 Control Voltage Equipped With: Hood Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused6746-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152400-used-6746-310-charles-hones-gas-operated-melting-pot160 Lbs28" x 19" x 40" H180 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/481b4fcad654a32e01580346e91f3c1d/original-6748-002-e1366899628744.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d39a5e419966f6bb639b326a61b67bd/original-6748-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4447601dfef0d3ee32399ebb1c2521db/original-6748-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72ee118ec563158876cf1ba1aad4e090/original-6748-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f3d6c59f9f76f1aa407c240f8479845/original-6748-004-1024x768.jpg2024-09-25 15:41:41 UTC6152401400 Volts / 3 Phase / 60 Hz Equipped With: Programmable Digital Control for setting induction and temperature Operations ManualGeneral Jewelry MachineryCasting Machines & Equipmentused0402-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152401-used-0402-185-opdel-opticom-2kg-melting-furnace-model-fs-024.2 Kw1250 Degrees C2KG 18KT Gold2 Liter per minute (20 degrees C)3 Bar6 Bar19.5" x 19.7" x 21.5" H76 db MAX110 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a02f836349d7ff8fed6d6558cd1ff16c/original-op-001-e1380901433194.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa91d33121ef31e38781d90b691484ea/original-op-0011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b155bbd920ba3e30ba702f4c7181921/original-op-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/67340682292de78299eebd467d2e2e8e/original-op-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20c340e65afebcf2cae1476110e8f65c/original-op-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3dcfc086973c5a100067834f334e21b/original-op-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfbab2190764f19446ec20f3e49b73a5/original-op-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22d21eb611c0e026551e8db20ba6a54b/original-op-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d832fb8dc25c589f0b2bf33f631b45d8/original-op-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/230eb72a8cdeb87992da0baebfe22aeb/original-op-011-768x1024.jpg2024-09-25 15:41:42 UTC6152402Scroll Down To See Video! This machine has been specifically planned for producing wedding rings of different shapes ( half - round, flat etc. ) with the internal diameter fixed in advance. For thi spurpose, we have used, as electronic plant of check, a gear- case (COMPUTER), which is able to control all the ma- chine functions. All this allows to check the internal diameter of the wedding ring, the number of the wanted pieces and the complete working cycle ( including the load and the unload of the pieces ). The machine workings are essentially two : automatic and manual. When you use the machine in the manual working, It is possible to program only one size and it is unprovided of the automatically load cycle of the piece. When you use the machine in the automatically working, it is possible to program more than one size to work and the number of the pieces for each size you want. This cycle is completely controlled from the computer, so that, once you put the information and the pieces in the automatically loader, you do not need the operator. When the working phase is finished, the machine will stop itself. NEW 2018, In-Stock at Gold Machinery! Serial Number 175 Model LAMFEAC HEIGHT 1600 mm. WIDTH 800 mm. LENGTH 800 mm. MIN. WEDDING RING DIAMETER 13 mm. MAX. WEDDING RING DIAMETER 23 mm. MAX. WEDDING RING WIDTH 13 mm. DIAMETER OF THE ROLLING SHAFT 8 OR 10 mm. DIAMETER OF THE ROLLING WHEEL 115 mm. PRESSURE COMPRESSED AIR 5 Atm. FEEDING 380 + N + T POWER 2 kW. WEIGHT 380 Kg. WEIGHT WITH PACKING 480 Kg. Equipped With: 1 Roller Groove 4MM 1 Roller Groove 5MM 1 Roller Groove 6MM 1 Roller with Flat Rollwer 1 Steel Pin with Point 1 Steel with Point & Comfort 3MM 1 Steel with Point & Comfort 4MM 1 Steel with Point & Comfort 5MM 1 Transformer to 220V, 150V with Box 1 Casting Work for Rings 24k OFFERS WELCOMED Ex-Works, Gold Machinery RI USAGeneral Jewelry MachineryRings, Bands & Banglesused2912-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152402-used-2912-140-new-goldpro-oromeccanica-automatic-ring-rolling-system-for-wedding-rings-with-plc$91,617.00 USDhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41163e7a2f233ad90d78690e0f93443d/original-IMG_20161024_145945_SC-e1555334834805.jpg2024-09-25 15:41:32 UTC61524030110v / 1Ph / 60Hz 14" Solid platens 1200 Watt solid flat Heaters platens 50 Ton hydraulic RAM Solid state control Digital Electronic Timer 1 sec. to 99 hours Equipped With: Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused0559-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152403-used-conley-accu-mold-4-post-rubber-mold-casting-vulcanizer15"9" - 13"17 1/2 x 1-1/2" Thick550 F18" x 19" x 36" H650 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bfe5251ebb8a163a8ed5fde148590a0/original-cast-002-e1398869298789.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1eea311d84a86a3cf31fa64c21f2d21b/original-cast-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49a48631bfba3aeb2d87ebe66332d526/original-cast-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dc71f81758aea13317e6a5e61e0930f/original-cast-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6854ced5180695f304cbfc5758ac827d/original-cast-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6f9fb8bb9442901f20997b5075d1028/original-cast-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8425298c09f0d452f39641b4873c8bd/original-cast-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94a0e2ccda3f2ee4e8f8ff33d8e4128b/original-cast-007-768x1024.jpg2024-11-11 19:19:50 UTC6152404230-460V/3PH/60HZ Air cooled - direct driven rubber molding, thermoforming, printed circuit board testing, hospitals, laboratories, vacuum lamination, printingGeneral Jewelry MachineryCasting Machines & Equipmentused2135-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152404-used-2135-310-busch-single-stage-rotary-vane-vacuum-pump-model-rc9005 HP, 1740 RPM1750 RPM63 CFM2.7 quarts29-1/2" x 19-5/16" x 11-7/8"98 lbs.packaging, food processing,https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df9b21332a50bd45d3f95e1273df8539/original-alpine-012-e1459776113132.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64d2edc10ed90232567c1199ddeca47c/original-alpine-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b15dad98801fec314009dfae3cf6799f/original-alpine-0121-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc2e4c0bdfd66c8cce60d93c96e2c535/original-alpine-013-768x1024.jpg2024-09-25 15:41:39 UTC6152405110v / 1Ph / 60Hz For 9" and 12" Molds Platen size; 12" x 12" 25T Hydraulic Bottle Jack Temperature up to 550 F Equipped With: Stand TimerGeneral Jewelry MachineryCasting Machines & Equipmentused6744-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152405-used-6744-185-lee-casting-4-post-rubber-mold-vulcanizer13"19" x 16" x 60" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d85c9930c55b5820e02ba8af80bf4d0/original-6744-001-e1366897162253.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad334401a157588a62fd783b15899ae8/original-6744-0011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9cb92540c38490cf9829758d2fd9907/original-6744-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d2801785aaf8fccb410c87c7475eea5/original-6744-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a397968598e8a0ba832f1d36deb49aa/original-6744-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c05cebe48d0b14d83ae4516772a5a1d/original-6744-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bebaddbf247255f51220ebd2b468503a/original-6744-007-768x1024.jpg2024-09-25 15:41:42 UTC6152406Equipped With: Partlow temperature control Hood Metal standGeneral Jewelry MachineryCasting Machines & Equipmentused1413-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152406-used-1413-310-charles-hones-buzzer-gas-operated-melting-pot-160-lbs-capacity160 lbs.28" x 19" x 450" high200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13b1d0dd3e6797b358fa2397845a2c43/original-0021-e1468517538214.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe38313ad23572dcc45581381ce99da2/original-0071-562x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c58a946301904f32bf783d1ab1799b4/original-0022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cf2706c668d1df824f407460ba240c9/original-0031-1024x768.jpg2024-09-25 15:41:38 UTC61524070Equipped With: Partlow temperature control Hood Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused6721-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152407-used-charles-hones-gas-operated-melting-pot160 Lbs28" x 19" x 40" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b34a78c78fd201766ffcdbefca6dcfa6/original-6721-002-e1365717922328.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02a0378711adcd8d61f896ea3285f339/original-6721-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04e10f1ef6643e305d7b9e7de26fb3f1/original-6721-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7f8f42b8b4521243d19f7c6dd616615/original-6721-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90d293ac3cc51abbd52c5a78d18764a1/original-6721-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83293d314a2c3066a3d7d2a86a2f5d04/original-6721-005-768x1024.jpg2024-11-11 19:21:10 UTC61524080110 Control Voltage Equipped With: Hood Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused6747-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152408-used-charles-hones-gas-operated-melting-pot160 Lbs28" x 19" x 40" H180 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b32cb1d09d26c7526d636f4a0e136a6b/original-6747-004-e1366896286844.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76780157fa92ce1182e1a0eb987b7172/original-6747-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5f7c217476211ef977fedb73dbfaa4b/original-6747-0041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68597dc4265478761d2b786318e6818a/original-6747-005-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b9a2779009a5308669b5fb73bb09cc7/original-6747-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/620e48f53a30fea3dd39ef34ec561594/original-6747-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2537867894f4f9e83ee00b0a34bfc2c/original-6747-008-1024x768.jpg2024-11-11 19:20:15 UTC6152409115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused0225-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152409-used-0225-400-wax-mold-injector-for-jewelry-casting2 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/819fcc6f2ed0848b0996f4fe0c5646b2/original-0061-e1376954289744.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06ff3680831282d77b72499a411d4fe9/original-0062-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1ea98124e10e2acc65f614ad92c1f99/original-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e3c30d76cca05bbb279c7de4c99b562/original-0032-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9167db8410f9344d06ea25533e55ddf9/original-0041-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ec63bf39a2e075a61e8b59a30b2af00/original-0051-1024x768.jpg2024-09-25 15:41:40 UTC6152410110v / 1Ph / 60Hz 14" Solid platens 1200 Watt solid flat Heaters platens 50 Ton hydraulic RAM Solid state control Digital Electronic Timer 1 sec. to 99 hours Equipped With: Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused6727-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152410-used-6727-310-conley-accu-mold-4-post-rubber-mold-casting-vulcanizer15"9" - 13"17 1/2 x 1-1/2" Thick550 F18" x 19" x 36" H650 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/154655911d2453480f7eafe7b5dcb1fc/original-a-010-e1366215730853.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d354deec712e6b603a8f05f97231057d/original-a-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8799d723455ade04e79b49bee87e57fe/original-a-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cd24cc4d2df1953c5df528bea7871a2/original-a-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f69673a7a2988f10bc8564bb72d788c4/original-a-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22340d2b5451e7e8e504a0915741e34c/original-a-0101-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbc5cc41b925f2f27b17a1bb556761b8/original-a-012-768x1024.jpg2024-09-25 15:41:42 UTC61524112019SolankiS4Manufactured by - Solanki Mechanic Works Work capacity: X-axis 175mm Y-axis 120mm Z-axis 110mm B-axis 190DEGREE Z1-axis 220mm Z2-axis 200mm Work feed: X- Axis 0-8000mm/min Y- Axis 0-8000mm/min Z- Axis 0-8000mm/min B- Axis 0-20000mm/min Z1- Axis 0-10000mm/min Z2- Axis 0-10000mm/min C1- Axis 0-600000mm/min C2- Axis 0-600000mm/min SP- Axis 0-360000mm/min Adjustable with Override 0-120% Machine actual dimension wooden box packing box Length 1992 MM 2092 MM Breathe 1675 MM 1775 MM Height 2020 MM 2120 MM Weight 878 KG 1100 KG DESCRIPTION OF CONTROL PANEL: Display Alphanumeric keyboard (Editing/cursor key) Machine Control Panel CNC automatic diamond cutting capabilities for 5mm Round, Star, Marquise, Heart, Octagon, Square and Triangle shaped items Equipped With: Mini Rhinobar® Model Number MRB6 1.62 Bar Diameter Range 1/8" to 1-5/8" Maximum Bar Length 6' Motor 1 HP / 1725 RPM Electrics 208/220/440V, 3 phase Overall Length 11'General Jewelry MachineryDiamond Faceting Machinesused3568-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152411-used-solanki-soliyo-twin-spindle-cnc-automatic-diamond-faceting-machine-model-s45 kW220 3 phase32 amps 4 pole.4 core 6mm from main to MCB1000020002000MANUALER-201.667 HzUp to 10mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd4fa851a0e9ea9d90fb8c94515a8f29/original-1-5-e1635261330462.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97a800043315ed9905fcd1451de4e19c/original-2-2-1024x683.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ea126a55412a953523bcaaea25eb007/original-3-2-683x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4b7bfefac1eb0bb15df4afa9353015d/original-4-1-683x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9343905dbe57ebf0640290470a0031c1/original-5-1-1024x683.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/344b209ca93ba44299c6141e00db5d86/original-6-1024x683.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f817ce2ea41945ac2e8bac805d5c2407/original-7-1024x683.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce591e136238c6efe07d1fb6d7cd9646/original-8.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c8b06f152d8e52fff2cfab00e9a31e8/original-1-6-1024x683.jpg2024-11-11 19:07:12 UTC6152412SET UP FOR RING WORK 150MM DIAMETER TOOL HOLDER Equipped With: HAAS CNC #5C PNUMATIC/ELECTRIC INDEXER WITH CONTROLS FOR RING DIVIDER, Serial #62647 OPERATING MANUAL OPTICAL TOOL SETTING SCOPE FACTORY CABINET STAND WITH 5 DRAWERSGeneral Jewelry MachineryDiamond Faceting Machinesused2792-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152412-used-2792-110-posalux-swiss-cofacet-mark-ii-diamond-faceting-cutting-machine-for-jewelry-with-haas-5c-cnc-control230V/3PH/60HZ7000180 DEGREES360 DEGREES60" X 36" X 62"1500 LBS (APPROX)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/212e5d8219e89eaa2ecbd2ad1e30041a/original-1-6-e1537457026357.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f17a3458b67894ef566668f61a4b799b/original-IMG_8352-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb9a5dd8d4b7f6e05b5f8a0b997bd260/original-IMG_8355-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/854625e9666a43183395e54aa0a0517c/original-IMG_8357-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f772e7575755490ae32294013e7cf8d/original-IMG_8358-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1d6b5b227c6ba0ad6e69c44566c977f/original-IMG_8362-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f37ab255cbb1e8181371cb59513edc9c/original-IMG_8363-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84883d9383cafbbd99553a0942c22224/original-IMG_8364-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c16cf1a601b721f9e2a89e31d8608426/original-IMG_8366-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b04ea51dcbce96439d87b7edd29d18b8/original-1-7-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b027698d59fc91f04bdff3a2a6dc7c4b/original-2-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/347092079a87b2506c98b831c16f7354/original-IMG_8343-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ff320f1c898ae286559ec9de1487bc9/original-IMG_8344-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c74269581c7fd272bb9c238146a31015/original-IMG_8345-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e302fb02d6524606d7f1483b2289f245/original-IMG_8346-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e3648a3bab38628154401f15deb61456/original-IMG_8351-1024x768.jpg2024-09-25 15:41:48 UTC6152413General Jewelry MachineryDiamond Faceting Machinesused8702-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152413-used-8702-110-tousdiamants-diamond-faceting-toolholder2"1/2" threaded5-1/2" x 5" x 2-1/2" thick10 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c5b206f5999970e2402d85dd29112fe/original-001-e1346862055722.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1496a989ddbcab6596d58453ecc83bd4/original-0011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ba08efa0f8b72276a3bc0f7e24052be/original-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94139ac0fc0d727142668d1cb2248175/original-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a0bd73459766d0789962ef85d943be6/original-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4577ba464dfbd32bbda39d502654e58b/original-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2766105485908fc7425f382901abc082/original-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/739f56d022cabff846e87e17e0ecb4e9/original-009.jpg2024-09-25 15:41:47 UTC6152414Equipped With: Partlow temperature control Hood Metal StandGeneral Jewelry MachineryCasting Machines & Equipmentused6725-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152414-used-6725-310-charles-hones-gas-operated-melting-pot160 Lbs28" x 19" x 40" H200 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31660d42b2303d888f040d42f1606253/original-6735-005-e1366136206133.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f3409a2dd3099f173ac5a223034ceab/original-6735-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1541fe67d12a24b3684eabf5f66bc4a5/original-6735-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2879227a567fb14a2f196d8ce845b79d/original-6735-0051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cba95fc3efea88dd92403c570510fd4/original-6735-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92f221c3666193c13b0e5844fbb40aa1/original-6735-009-768x1024.jpg2024-09-25 15:41:42 UTC615241520V/3PH/60HZ Model # T2E Dual spindle motors Equipped With: Longitudinal table feed 360 degree rotary ring divider 12" infeed Tool setting scope 4-way diamond tool holder Factory standGeneral Jewelry MachineryDiamond Faceting Machinesused2504-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152415-used-2504-110-tousdiamants-swiss-2-head-diamond-faceting-cutting-machine-jewelry-model-t2e56" x 25" x 65" hgih1250 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e9b66bfa247c4095cf2c2d7b83aac3f/original-0531-e1492437555580.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14ce9a5be81003a9bd38002737ce1088/original-068.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f6b4715d1a602bd1ca0524c18312b2e/original-0532-1024x766.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/792c8d114e34221fdd64a5f28bccb718/original-0541-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/837424d29bd5b63ce6265a66bcee9e3c/original-0551-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6356e9a26dcb0673563874458aaf8c5/original-0561-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb4eaf2203af4524fb6451c2d5e91cae/original-066-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/964dacea27d49b796466eca5ffbe8eab/original-067.jpg2024-09-25 15:41:46 UTC6152416Model T4 Setup for Ring Faceting W/Divider 3000 Revolutions/Minute .General Jewelry MachineryDiamond Faceting Machinesused7075-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152416-used-7075-110-fmtd-tousdiamants-swiss-diamond-faceting-cutting-machine-jewelry-for-rings0,10HP 380/220 Volts 50/60 Cycle100 X 60 X 80 CMhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8126034f8d2f0e4816f67117c0492ad6/original-7075-005-e1348244638917.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea3e86e3295757ceae21b980e2bb08b1/original-7075-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e95729ad06283a5427b1a402bfc880ad/original-7075-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c1e0660d565c73accf50a8a3f219fff/original-7075-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2847f39cb570cbc9e395bdbeb292b24/original-7075-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50f08260ac7297de09d2ebdab0e5664d/original-7075-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b512dff8c875adeb3e8c9b83989ee82/original-7075-008.jpg2024-09-25 15:41:47 UTC6152417Model T2E.G Electrical -220/380 Volts ,3Ph, 50Hz Precision Horizontal (G-Head) Cutting Spindle Precision Vertical Cutting Spindle Hydraulic Divider Positioning For Horizontal Or Vertical Cutting Equipped With: Semi -Automatic Rise & Fall Of Ring Divider Tool Setting Microscope Built In Hydraulic System (G-Head ) Horizontal Cutting Spindle Motorized Revolving DividerGeneral Jewelry MachineryDiamond Faceting Machinesused7074-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152417-used-7074-110-tousdiamants-swiss-2-head-vertical-horizontal-diamond-faceting-cutting-machine-jewelry-for-wedding-rings1450 X 750 X 1600 MM500 KGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5714fe31535235f40bf0dca8ebea12f2/original-7074.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2409c6a013d218a4e925d940cf580e01/original-0212-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/074470e15d8815a4d0ba71969a88f77d/original-0221-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcd33a6771c0a609b92fe05e1840ffbc/original-0231-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0eab252e7278f8f566a51864c4dc808/original-024-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0545b4a4df32f34eea93e804ea2297da/original-0251-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a99a6c94bea690839a80f9d31bccbe9f/original-0271-768x1024.jpg2024-09-25 15:41:47 UTC6152418220V/3PH/60HZ Two spindle diamond cutting/milling machine with separate vertical spindle and separate horizontal spindle Equipped With: Diamond tool holder "horizontal" Diamond tool holder "vertical" Ring Divider Tool setting microscope Revolving/indexing divider for flat rings Hydraulic work table with left/right motion Factory steel cabinet stand Hydraulic motor & pump systemGeneral Jewelry MachineryDiamond Faceting Machinesused7101-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152418-used-7101-110-fmtd-model-t-2e-dual-head-diamond-facet-cutting-machine-for-ringshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8eb0125a672f9571194325538e43805c/original-7101.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bbacd8325dfb1fe8b31e8055a4fd708/original-7101-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f704f769e78906b84adad9df6a303ba/original-7101-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/013519da01c8b188efe7724666cb0e95/original-7101-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90e71978c9d0bfe1628fe56d31fa94d1/original-7101-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bb1da825779c2dddd162d8c5116edbc/original-7101-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7023453bfff8152edf5a1bd679dba28c/original-7101-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbd44e1d023a38f001b63cf490f748d2/original-7101t.jpg2024-09-25 15:41:47 UTC6152419220V/3PH/60HZ Equipped With: Diamond tool holders Tool setting microscope Revolving/Indexing divider Hydraulic work table with left/right motion Factory steel cabinet stand Hydraulic motor & pump systemGeneral Jewelry MachineryDiamond Faceting Machinesused9922-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152419-used-9922-110-fmtd-tousdiamants-model-t2e-swiss-diamond-faceting-cutting-machine-jewelry1250 lbs.56" x 25" x 65" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8543cac5168e07f07833840d43b700ad/original-9922.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2b9d92482efa286cd022f1d56953a5d/original-IMG_1685.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b1e61e5cb743a053d226eb0f4ac914a/original-IMG_1686.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10488e072792d6f8c7a12ba89a82fe3f/original-IMG_1687.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49e37a3c976df9bebaa6f08b6a49839c/original-IMG_1690.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6458a7c46ef48e21135cea19f86f3cc/original-IMG_1691.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52de14fb7f270fc8f2c497bedfc55427/original-IMG_1692.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/750dd80e5abc8636c90f01baefc7a9d8/original-IMG_1692_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/baca61a9e6b25efbd6ba277b7a7eefbb/original-IMG_1693.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd7ca8c2f813ecb5bb0675ad8fffb8a5/original-IMG_1694.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fe43b415b23320ee6a0db433206a596/original-IMG_1695-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c2e19e8651d224f3140be4f617ca920/original-IMG_1696.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f22ad3216c9a39ed86baee9598b4ed5/original-IMG_1697.jpg2024-09-25 15:41:49 UTC61524200Suitable for diamond tool finishing on bangles, wedding rings, flat & convex rings, watch-cases & various non-ferrous parts. It is equipped with a high precision spindle holder head at changeable speed from 0 to 4000 rpm by means of frequency inverter, with a rapid-locking system for the pincers and a double crossed carriage driven by hand with micrometric stops. Complete with base, service spanners & spare belts. CE 98/37 certification. 230V / 50-60Hz / 1 phase Accessories Equipment - Reduction for Rings Availability: Ex-Factory, Italy Check the latest exchange rateGeneral Jewelry MachineryDiamond Faceting Machinesnew115-89Pawtucket, RIhttps://www.goldmachinery.com/listings/6152420-ompar-115-89-high-precision-diamond-cutting-for-wedding-rings-bangles135 x 80 x 148(h) cm350 Kg250 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9be6dc113510637841b7aa6238ac3c96/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c67f945cdffa2b669a6825a6d0b5c2ce/original-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da8494340317887fe0ed8b4c2817ee47/original-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09cc3ce12baa55b738058d4b8fd0dac2/original-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cdc8bc23e373f44971eafdd06bd25d8f/original-2.jpg2026-01-27 14:21:56 UTC6152421208V/3PH/60HZ 25 AMP Cooling water pump with tank Optional with crucibles C35 & C65 For crucible KR 114/117 Equipped With: Temperature control Cycle timer Natural - Vacuum - Inert Electrical schematic & Operations manual THIS MACHINE IS BEING LISTED AS A PARTS MACHINE ONLY - NOT CURRENTLY OPERATIONAL MANUFACTURER WEBSITE: http://www.manfredi-saed.it/ NEUTROMAG DIGITAL DENTAL, JEWELRY, INDUSTRIAL Top quality and heavy duty work are the chances given by this machine. Thanks to its versatility Neutromag Digital can melt and cast any gold alloys of any karat, silver, platinum, and many other non precious alloys with the choice of the most suitable environment condition between natural, vacuum or neutral atmosphere. CATALOG PHOTO: AIH manufactures induction melting systems to satisfy a broad range of applications, from ferrous to non ferrous melting. Our solid state power supplies are available from 10kw to over 300kw output power. This ideally suits small to medium sized melting shops, being versatile and reliable at minimum operating costs and maximum operating efficiencies. AIH induction melting systems are utilized for the production of ferrous and non ferrous castings for the following industries: Automotive Construction Precious metal refining Rail products Agricultural Aerospace Marine R & D laboratories A side melter has been added to allow static melting upto 150cc of volume (for NEUTOR 150F) and 350cc of volume (for MAGNUM 350F & NEUTROMAG 350F). The temperature control reader can be moved from the centrifugal side to the static one simply with a clip.General Jewelry MachineryCasting Machines & Equipmentused2047-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152421-used-2047-310-manfredi-saed-neutromag-digital-350-centrifugal-casting-machine-with-side-melter350 cc (6.6 kg 24 kt gold)5 kg of 24 kt gold in 12 minutes350cc (6.6kg 24K Au)5kg (3215pwt) of 24K gold in 12 minutes9,1kWCC350s - CG350s - CG350sXQ60 /15053" x 41" x 52" high592Kg (1305lb)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e87d0b173dde3cc3932b3da423b48ac/original-M-0012-e1438366233652.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c4b9ff8b714690088b7df3624ec4911/original-M-0014-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74d49eaa0b8047ad9e402d85e5018ace/original-M-0031-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d368e638fa970809375dc344ac29cc1e/original-M-0041.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26249a7aef235ffdba0d8282e95e6c7d/original-M-0051-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/755564921b00e385224e7f79136a5eff/original-M-0061-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e22931d7565d1f8617c7720250a080d5/original-M-007-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/820a093f237f46a79e28ae77bcd50157/original-M-008-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f0ab7ec1f95a35cc29b49033f3a2986/original-M-009-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d74ce87e8065a87adf4849655f87521/original-M-0101-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c64c3837f96163d5e90969be75ab7dd/original-M-0121.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d15fc10794181fe474b8a4f68d5f08a7/original-M-0131-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb0df89f13cb902fe43e2e71f47e3d1c/original-M-0162-1024x767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9bb36b30fa9391c290753e693a125e3/original-M-0175.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b74a924b1e9ac9a75ec16c91afe24d0/original-IMG_2572.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/731c7327ca594a4b282c26d95ce9f7d4/original-IMG_2575.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/666935bf190acf8dde0f1cb16ef5c8df/original-IMG_2576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/935a93d4886fc9e4eb39684bfc05a236/original-IMG_2577.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57e338c2c8d7b30a9961f979f9478243/original-IMG_2578.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6a73597eb556e73f65278ca36c9f1b1/original-IMG_2579-1.jpg2024-09-25 15:41:51 UTC6152422Universal diamond tool griding machine Mod. "TGM" suitable for diamond tools sharpening. It is fitted up with a solid treated cast-iron structure, a horizontal head with rugged high precision spindle, a double cross carriage where a moving tools holder device operated by gear-motor for alternate transversal movements is set up. The machine includes: Base Electric Plant N2 Interchangeable Toolings Service Spanners and Spare Belts CE 98/37 Certification 400V/50Hz 3-Phase Power Supply OptionalEquipment: N. 1 Wrapping 50Kt. polishing powder € 275,00 N. 1 Protection cover € 1.750,00 Check the latest exchange rateGeneral Jewelry MachineryDiamond Faceting MachinesusedtgmPawtucket, RIhttps://www.goldmachinery.com/listings/6152422-used-ompar-tgm-diamond-tool-grinding-machineEx-Factory, Italy€25.000,00 Euroshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a8ad7843681e818fa0c45bae7825e06/original-TGM-e1580305874891.jpg2024-09-25 15:41:47 UTC6152423220V/3PH/50-60HZ Equipped With: Gearbox driven tilting divider for (D) shaped rings Reduction device - CR 30 mm Pivoting (G) head Factory made steel stand Swiss tool setting microscope Additional Photos:General Jewelry MachineryDiamond Faceting Machinesused6950-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152423-used-6950-110-tousdiamants-t4-dtg-swiss-diamond-cutting-machine-with-semi-automatic-ring-divider3000 RPM(20) 8 - 24040" x 36" x 60" high900 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d4bb93f15a65ceca5cc4d01c6d29bf7/original-6950.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f79427cc137101a596a6a0948d9c5e60/original-6950-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f85710bb17ac39c37ca31fba4a59ceb4/original-6950-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce5a5e6c72dd8c09818f576caec64769/original-6950-3.jpg2024-09-25 15:41:42 UTC6152424Suitable to carry out decorations on flat and convex wedding-rings and bangles, medals and plates, chains, balls and various objects. The machine is complete with base, electric plant, service spanners and spare belts, CE 98/37 certification. Available both in manual or semi-automatic versions Models RA/961 OMC 1 horizontal head with 300 mm. short manual carriage, Eur 13.900,00 RA/961 VMC 1 vertical head with 300 mm. short manual carriage, Eur 10.600,00 RA/961 2MC 2 (horizontal + vertical) heads with 300 mm. short manual carriage, Eur 13.200,00 RA/961 OMM 1 horizontal head with 700 mm. medium manual carriage, Eur 11.000,00 RA/961 OML 1 horizontal head with 1000 mm. long manual carriage Eur 11.900,00 RA/961 VMM 1 vertical head with 700 mm. medium manual carriage, Eur 11.400,00 RA/961 2MM 2 (horizontal + vertical) heads with 700 mm. medium manual carriage, Eur 14.000,00 RA/961 2ML 2 (horizontal + vertical) heads with 1000 mm. long manual carriage, Eur 14.900,00 RA/961 ODM 1 horizontal head with 700 mm. medium motorized carriage, Eur 13.300,00 RA/961 VDM 1 vertical head with 700 mm. medium motorized carriage, Eur 13.700,00 RA/961 2DM 2 (horizontal + vertical) heads with 700 mm. medium motorized carriage, Eur 16.300,00 RA/961 ODL 1 horizontal head with 1000 mm. long motorized carriage, Eur 14.200,00 RA/961 VDL 1 vertical head with 1000 mm. long motorized carriage, Eur 14.600,00 RA/961 2DL 2 (horizontal + vertical) heads with 1000 mm. long motorized carriage, Eur 17.200,00 OPTIONS H. Spindle to table distance extension (min.100 max 500 mm.) Eur 2.800,00 D. Revolving dividing unit extension for 90° positioning Eur 448,00 L. Linear horizontal head descent (6 mm. stroke) Eur 1.120,00 P. Optical layer adjusting support Eur 644,00 C. Gauge meters on the heads Eur 336,00 Q. Gauge meters on the slides Eur 336,00 I. Inverter on the spindle (V7 CCB0 0P4) Eur 1.960,00 EQUIPMENT A. Revolving dividing unit for wedding-rings and bangles Eur 4.900,00 B. Motorized revolving dividing unit for wedding-rings and bangles Eur 10.220,00 C. Steel pincer c/w tie-rod for wedding-rings Eur 700,00 D. Steel pincer c/w tie-rod for bangles Eur 700,00 E. Set (22 pcs.) of reductions for outside wedding-rings Eur 770,00 F. Set (4 pcs.) of collets for outside of bangles Eur 504,00 G. Manual jerking 360°, 350 mm. revolving dividing Eur 3.850,00 H. Manual jerking 360°, 500 mm. revolving dividing Eur 3.950,00 I. 250 mm. Fixed vice Eur 2.100,00 J. 250 mm. Tilting vice Eur 2.450,00 K. Manual and continuous jerking dividing unit for chain Eur 6.230,00 L. Automatic jerking dividing unit for medals Eur 7.350,00 M. Dividing unit for medals with cam-closing of pincer Eur 2.380,00 N. Dividing unit for cuff-links and rings Eur 2.300,00 O. Brass pincer Eur 140,00 P. Dividing unit with vacuum platform Eur 2.240,00 Q. Lubricated Vacuum pump LB18 Eur 2.240,00 R. Revolving dividing unit for beads Eur 9.600,00 S. Chain step cutting device Eur 9.900,00 T. Chain tooling for step cutting device (1 per each chain size) Eur 470,00 U. Ice freezing plate 300×80 mm. c/w cooling plant Eur 11.200,00 V. Cutter c/with pincer diam.6 mm. Eur 970,00 X. 6-interchangeable tools-cutter Eur 1.510,00 Y. 4-tools cutter Eur 860,00 Z. 6-tools cutter Eur 910,00 1. Large ornament cutter Eur 700,00 2. Lapping cutter Eur 700,00 3. Head for stars c/w n.1 diam.tool for stars (how many tips to be specified) Eur 4.800,00 4. Centering jig/multi-diamond tools holder c/w optical layer Eur 4.250,00 5. Suction plant on the horizontal head Eur 3.200,00 6. Protection cover Eur 2.500,00 DIAMOND TOOLS A. 4,0 mm. lapping diamond tool (for lapping cutter) Eur 605,00 B. 150°/ 3 mm. roughing diamond tool (for lapping cutter) Eur 540,00 C. 150°/3,0 mm. diamond tool Eur 540,00 D. 180°/2,0 mm. diamond tool Eur 380,00 E. Diamond tool for stars Eur 540,00 F. Eccentric diamond tools (radius to be specified) Eur 400,00 G. 2,0 mm. concave/convex diamond tool Eur 470,00 H. 3,0 mm. concave/convex diamond tool Eur 560,00 I. 4,00 mm. P=0,20 satin-finished widia tool Eur 530,00 RA/961 Wooden case packing Eur 970,00 Ice freezing plant Wooden case packing Eur 600,00 DIMENSIONS & WEIGHTS: RA/961 350:Gross Dim.:Cm.135x100x178(H) – Gross weight Kgs. 470, Net weight Kgs. 340 RA/961 500:Gross Dim.:Cm.145x100x178(H) – Gross weight Kgs. 480, Net weight Kgs. 350 Ice freezing plant case: Gross Dim.:Cm.100x 90×138(H) – Gross weight Kgs. 240, Net weight Kg.150 Availability: Ex-Factory, Italy Price & Packing, See prices at top of page.Check the latest exchange rateGeneral Jewelry MachineryDiamond Faceting Machinesusedra961Pawtucket, RIhttps://www.goldmachinery.com/listings/6152424-used-ompar-ra961-universal-diamond-cutting-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb9d8781131c9bd4a04c912e6aa02271/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4818289ebe598e06866880b0ed857c7/original-6.jpg2024-09-25 15:41:47 UTC6152425Controlled by C.N.C., suitable to carry out various decorations on wire, tube and round and oval shaped chain, in continuous or alternate way. The machine is fitted out with a horizontal rotary diamond tool-holder unit at variable speed and it's interchangeable with a vertical or horizontal one with diamond tool having an inferior diameter (20 mm. and 50 mm.), an automatic, alternate movement of the tool-holder carriage, a chain take-up unit at changeable pitch, the whole controlled by electronic programme. The machine is equipped with base, protective cover, electric and electronic plant, control panel for programming, service spanners, spare belts, CE 2006/42 certification The machine is equipped with: Base Protective cover Electric and electronic plant LCD & key-board programming Service spanners Spare belts CE 98/37 certification 230V/50-60Hz 1-Phase Power Supply Accessories: 5246 N. 1 Fixed support for chain ……………………………… Eur 300,00 5109 N. 1 Tooling for round section chain …………………… Eur 300,00 5256 N. 1 Chain/wire driving guide for VRT-10 …….. Eur 220,00 5107 N. 1 Tube driving guide for VRT-10…….. Eur 220,00 5110 N. 1 Fixed support for Tube …………. Eur 330,00 NME390023 N. 1 Tube tightener for VRT-05 ……………… Eur 240,00 NME440010 N. 1 Interchangeable hardened jig (1 per each wire/tubing size).…. Eur 450,00 NME440001 N. 1 Interchangeable jig (1 per each wire/tubing size) ... Eur 150,00 NME150343 N. 1 Fixed support for Oval item……….. Eur 240,00 5271 N. 1 Oval chain tooling (up to Radius 2,5) ……. Eur 1.500,00 5272 N. 1 Oval chain tooling (from Radius 2,5 up to 6,5) ………. Eur 1.500,00 5273 N. 1 Oval chain tooling (Radius 6,5 and over) ………... Eur 1.500,00 NME380011 N. 1 Tube for Oval / Round shape ………………. Eur 190,00 5125 N. 1 Entering guide unit for tubing / oval on VRT-10……… Eur 330,00 5153 N. 1 Dragging chain winder ..….…….. Eur 3.450,00 5102 N. 1 Horizontal head diam. 80 mm. ………… Eur 2.800,00 5242 N. 1 Horizontal head diam. 50 mm. … Eur 2.800,00 5243 N. 1 Horizontal head diam. 25 mm. ………… Eur 2.800,00 5103 N. 1 Vertical head ……… Eur 1.500,00 5290 N. 1 Head for Stars VRT-10 ………… Eur 2.800,00 DIAMOND TOOLS VRT05005 N. 1 Diamond tool 160°/2,0 mm........……… Eur 270,00 VRT05006 N. 1 Diamond tool 180°/2,0 mm.....……….. Eur 270,00 NRT05007 N. 1 Concave diamond tool ……… Eur 375,00 VRTO5008 N. 1 Convex diamond tool ….……. Eur 340,00 VRT05009 N. 1 Satin-finished diamond tool 2,0 mm. …………. Eur 340,00 VRT05016 N. 1 Eccentric diamond tool 160° R=0,8 …. Eur 190,00 N. 1 Wooden case packing …………. Eur 630,00 DIMENSIONS & WEIGHTS Gross Dimension: Cm.165 x 110 x 173(H) - Gross weight Kg. 500 - Net weight Kg. 400 Availability: Ex-Factory, Italy Price Contact For Pricing Check the latest exchange rateGeneral Jewelry MachineryDiamond Faceting MachinesnewvrtPawtucket, RIhttps://www.goldmachinery.com/listings/6152425-new-goldpro-patented-diamond-cutting-machine-mod-vrt-10€ 600,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/699fcd1a486d48ad1b622ba62eceea3a/original-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7cf5b13522120fd92179ccde00b0be7/original-2.jpg2024-09-25 15:41:47 UTC6152426General Jewelry MachineryDiamond Faceting Machinesused1941Pawtucket, RIhttps://www.goldmachinery.com/listings/6152426-used-1941-used-vise-for-diamond-cutting4https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d9ed8eb8777db4a16a5aa54007f3f392/original-1941.jpg2024-09-25 15:41:47 UTC6152427Vise for Diamond Cutting Large Pieces 4 Brass JawsGeneral Jewelry MachineryDiamond Faceting Machinesused1940Pawtucket, RIhttps://www.goldmachinery.com/listings/6152427-used-1940-used-vise-for-diamond-cuttinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dd198c7aeab94cf8ace1150b298cc89/original-1940.jpg2024-09-25 15:41:47 UTC6152428Set Up To Cut Flat Stock Reel To Reel Stand Mounted 220V/3hp Horizontal Head U.S.vari-speed Drive for Feed RollsGeneral Jewelry MachineryDiamond Faceting Machinesused2337Pawtucket, RIhttps://www.goldmachinery.com/listings/6152428-used-2337-used-tousdiamants-type-t2b-diamond-faceting-cutting-machine-jewelryhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74f710eaf86e195135062fe6f15e7c59/original-2337.jpg2024-09-25 15:41:47 UTC6152429General Jewelry MachineryDiamond Faceting Machinesused1946Pawtucket, RIhttps://www.goldmachinery.com/listings/6152429-used-1946-used-vise-for-diamond-cutting7¾https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a58c66bec059c0971ec972d6676ad7d5/original-1946.jpg2024-09-25 15:41:47 UTC6152430Vise for Diamond CuttingGeneral Jewelry MachineryDiamond Faceting Machinesused1945Pawtucket, RIhttps://www.goldmachinery.com/listings/6152430-used-1945-used-vise-for-diamond-cuttinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce06bd3869b0ef11dfa3c6ed6c3053ca/original-1945.jpg2024-09-25 15:41:47 UTC6152431Posalux Dividerfor Bangles w/ nylon Collet & DrawbarGeneral Jewelry MachineryDiamond Faceting Machinesused1932Pawtucket, RIhttps://www.goldmachinery.com/listings/6152431-used-1932-used-posalux-dividerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2478458a464019a7533191a242bd19ab/original-1932.jpg2024-09-25 15:41:47 UTC6152432New GoldPRO™ Manual Revolving Dividing UnitGeneral Jewelry MachineryDiamond Faceting Machinesused1202Pawtucket, RIhttps://www.goldmachinery.com/listings/6152432-used-1202-new-goldpro-manual-revolving-dividing-unithttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d77902642c1b6828752e74a030d54609/original-1202.jpg2024-09-25 15:41:47 UTC6152433Semiautomatic drilling machine for rings and bangles Mod. SIM 1 with one controlled axis, suitable to drill and create diamond site on wedding-rights and bangles. The machine is fitted out with a strong treated cast-iron structure, one high precision spindles complete with tool holder and inverter for speed adjustment, a motorized dividing unit revolving at 90* electronically indexed. Complete With: Base Electric and electronic plant display + programming keyboard Optical layer Service spanners and spare belts Ce 98/37 certification 230V 50/60 Hz 1-Phase Power Supply Availability: Ex-Factory, Italy Check the latest exchange rateGeneral Jewelry MachineryDiamond Faceting MachinesusedsimPawtucket, RIhttps://www.goldmachinery.com/listings/6152433-used-ompar-sim-1-semi-automatic-drilling-machine-for-rings-and-bangleshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59b6f51652776d24a601561e0650f727/original-sim1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/836cbad7ca6ff7a8f465ffff2e93663c/original-sim1a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f04687bd674f8a1226bfac6abf4a88c8/original-sim1b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91d5219041ad19a13421b87686d5d611/original-th_sim1a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99a2af723408cf71ca6c1d3d4683cad7/original-sim1c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4f76d996e69f881a2030c35fdfe47b0/original-sim1d.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a5d729723ea01081c6d79f05939dd3b/original-th_sim1b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b5822b1dec028808b68caddb822cce1/original-th_sim1c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe8578be8c0cc4b5e407a43fb32c13ff/original-th_sim1d.jpg2024-09-25 15:41:49 UTC6152434380V/3phase/50Hz Floor Model Equipped With: Electronic Feed Set Up for Diamond Cutting Chain 2 Gang Toolholder g"head Scope Size: 50" x 46" x 62"hGeneral Jewelry MachineryDiamond Faceting Machinesused0684Pawtucket, RIhttps://www.goldmachinery.com/listings/6152434-used-0684-used-tousdiamants-model-t4dtg-diamond-cutting-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3db5525608a2025f84bd0ec7826a78d1/original-0684.jpg2024-09-25 15:41:48 UTC6152435Scroll Down To See Video! V380/220 1 ph 50 cycle Overall size 32" x 32" x 68" Estimated weight 1200 lbs Set Up for Rings with Change Gears Horizontal Spindle Auto. Tilting Dividers for Rings Bracelets Medallions Tool Setting Scope Floor Stand 220V/3hpGeneral Jewelry MachineryDiamond Faceting Machinesused1890-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152435-used-1890-110-used-posalux-swiss-diamond-faceting-cutting-machine-jewelryhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fccbbc617a40f58399e28e68b9af026f/original-1890.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b53a0705e336e93975b7269a839dd7f/original-posalux-0031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0484bb0eb2a32a65d65a66c2f1f40b2c/original-posalux-0011-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e462522a60f59480466230fedf55719b/original-posalux-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/faa3fac6ed8deea0eaf7cce46b6576b7/original-IMG_1677-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/593a7f1a899b72ce509b45c7bacec495/original-IMG_1678-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4efb2b1aa73ce5039f858b466369033/original-IMG_1679-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40ca29598b277c4647093393e63c3666/original-IMG_1680-1024x768.jpg2024-09-25 15:41:51 UTC6152436220-380V/3phase/50-60Hz Designed To Diamond Cut Various Designs & Patterns On Rings Bracelets Medals Etc. Presently Setup for Bangle Bracelets with Revolving Indexing Divider Bracelet Collet & Draw Tube Equipped With: Horizontal Cutting Spindle 2 Position Diamond Tool Holder Tool setting Microscope Bench Model Machine with Factory Steel StandGeneral Jewelry MachineryDiamond Faceting Machinesused0974Pawtucket, RIhttps://www.goldmachinery.com/listings/6152436-used-0974-used-posalux-diamond-facet-cutting-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/595a8c1d704c2ceb574d9237ee485ab1/original-0974.jpg2024-09-25 15:41:47 UTC6152437250mm for RA/961General Jewelry MachineryDiamond Faceting Machinesused9277Pawtucket, RIhttps://www.goldmachinery.com/listings/6152437-used-9277-new-ompar-orogold-tilting-vise-new-in-stockhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b9f29458c801000c495fc045a66b013/original-9277_110.jpg2024-09-25 15:41:47 UTC6152438150mm 2 Gang Diamond Toolholder (7)General Jewelry MachineryDiamond Faceting Machinesused1934Pawtucket, RIhttps://www.goldmachinery.com/listings/6152438-used-1934-used-150mm-2-gang-diamond-toolholderhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da21063a069715e476595753faf5ea5d/original-1934.jpg2024-09-25 15:41:47 UTC6152439230-380V/50Hz Equipped With: Built-in hydraulic supply, tool setting scope. Condition: Good, as taken from service.General Jewelry MachineryDiamond Faceting Machinesused3802Pawtucket, RIhttps://www.goldmachinery.com/listings/6152439-used-3802-moyas-two-head-diamond-faceting-cutting-machine-w-rotary-work-holder-and-collets-for-jewelry-bracelets-hoop-earrings-bangle-cuts2810rpm2790rpm12"6" Manual Leverhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21c10a9705d66a2e8849ffd7fe898782/original-3802.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0eb680b76311a807206b00b79a6b31bd/original-IMG_1812-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61203c500bbb426204726bd7ede40745/original-IMG_1813-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d7c4cb438ed8db2682d328cc58ace07/original-IMG_1814-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf1c27f85f95bf3bc3fd86ccc2b68db0/original-IMG_1815-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84ab0fae8e45b1be9250b4bd0712fa79/original-IMG_1816-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/746cf192e4a6a712c24a9214473aa8e4/original-IMG_1817-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3557391e9431671592fae274f40a6f4f/original-IMG_1806-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a549c48454efc418deed8df631a45d70/original-IMG_1807-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd2a94f723879078da7a09bcc73124c9/original-IMG_1808-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d5f3605c3f92c1ae5a6aa28a6c6d587/original-IMG_1809-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba40b5b4e3cc6e12b98d53d3541c87fb/original-IMG_1810-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d099082a8aa38dcdcc0b58b11988991/original-IMG_1811-768x1024.jpg2024-09-25 15:41:55 UTC6152440General Jewelry MachineryRolling Mills, Handused1179-155Pawtucket, RIhttps://www.goldmachinery.com/listings/6152440-used-1179-155-cavallin-wire-reduction-hand-operated-rolling-mill-model-fc100-5251)100mm ( 4")52.5 mm ( 2")3mm to 0,5mm11" x 10" x 45" high80 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b83c82be8ca50986b7e348abed12f2a5/original-next-002-e1434728062454.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be82d55fe45de9cb7e2d773f8264beb4/original-next-0071-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4ed4933f8c2d562a91616ff12439a7f/original-next-0021-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0028e4650246ba480376268e7cee1cf7/original-next-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85607f295ae23c750fdd327008c621dc/original-next-0041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea35e3c45d3c26d12fed136aef946598/original-next-0051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cb4dd27214a8cac291105ff6e17086b/original-next-0061-768x1024.jpg2024-09-25 15:41:52 UTC6152442Forming/Embossing & Trimming / Tools & dies Including: Cuff Links Shirt Studs Money Clips Tie Bars & Tie Slides Key Rings Tie Tacks Belt Buckles Blazer Buttons Monogrammed ItemsGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused5931-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152442-used-5931-700-tool-die-collection-from-lindsay-co-jewelry-related-forming-embossing-trimminghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de70be8ad86e3bb3e731009644401121/original-IMG-2258-e1686680003786.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ba92061b913d889c8c90d44998539ce/original-IMG-2269-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d91a05add8f83c0ca09f6123fd35108d/original-IMG-2258-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8dddc0c87580f69dbe2399a1d81edec/original-IMG-2259-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa035fb62855a5742b6ee7eb80aada71/original-IMG-2260-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2bdb0a50cbd83d0a205261efb897b14a/original-IMG-2261-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6c6230dc711185092b12a9365f1533e/original-IMG-2262-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47ba8f54b3c8bee90e8429398e52516f/original-IMG-2263-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/021b57539d69d976b6cca3881a3af136/original-IMG-2264-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48ccd9b6fe540076b66c8f0b5e969021/original-IMG-2265-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88d9d3927f9a85cdb458cb09fefe5dfa/original-IMG-2266-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2c0ca849938294cce5a3b8637626c26/original-IMG-2267-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f3e9061c4a0e2c4cf9ba092041c8930/original-IMG-2268-1024x768.jpg2024-09-25 15:41:56 UTC6152443115 V / 60cycle / 1ph SN708788 Overall size 8" x 11" x 15" Estimated weight 30 LBS Equipped With: OPTIMA AIR FEED Overall size 8" x 11" x 15" Estimated weight 30 LBSGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused5922-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152443-used-5922-700-dama-syntron-model-eb051-magnetic-jewelry-earring-back-parts-feeder-with-optima-air-feedhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84a7d3243b1b13579af85faabd5b68b0/original-IMG_8071-e1689945615331.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12b83c2a9c20b70fec5880d87e2ce22b/original-IMG_8075-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/723363ac91921d5b04d22b6468400b96/original-IMG_8067-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4f0895615bc2b5537a32c4cb4a255dd/original-IMG_8069-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13428707f836448699d488333c92b290/original-IMG_8071-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2333ac4a99a62873e512a9cb7665f4a/original-IMG_8072-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5de7829381ba52c6475ac6783d54db54/original-IMG_8073-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c985f7f41c12a6aaa64b4f70019ccd9d/original-IMG_8074-768x1024.jpg2024-09-25 15:41:52 UTC6152444Used in a power press to stamp serial numbers on product Can be used for any type of numbering requirements 7 - Rows of numbers 0 through 9General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused2384-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152444-used-2384-700-adjustable-7-number-serial-number-stamp-for-stamping-presses1/2" round ( requires a post to mount in press)2-1/4" x 2-1/4" x 2-1/4"2 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/649f0b9b0de6f559b96b4b09b85c6414/original-image0-e1661268535246.jpeg2024-09-25 15:41:49 UTC6152445115V/1PH/60HZ Seiko digital control: Model DC-190, S/N: 00212431 PC programmable capabilities Equipped With: Manual info for the control Digi DC-190 ULTRA COUNT Installation Manual: Scale Operations; Entering Tare Weights https://www.manualslib.com/manual/471921/Digi-Dc-190.html?page=20General Jewelry MachineryMiscellaneous Jewelry Equipment & ToolsusedDB010502651-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152445-used-2651-700-digi-dc-190-ultra-count-progressive-100-lb-capacity-digital-scale-model-1q950015.5" x 11"100 lbs.20https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d30d35ca871be1cc068d1e4a5fb0c856/original-2651-1-MAIN-e1515502363329.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fba88814532dd02de11ad8802ebd9beb/original-2651-2-1024x508.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d67e8ef904ac74341f2f91b7bee2de2e/original-2651-3-1024x744.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad12d57ae4f0fcaee204e6ac171e0fbd/original-2651-4-1024x532.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0e8df02566bf6f87f645f0d3f0946ad/original-2651-1-MAIN1-934x1024.jpg2024-09-25 15:41:53 UTC6152446Voltage 110/220 1 PH HP 3/5 PSI 100 Made in the USA Estimated weight 78 lbs Equipped With: Steam safety valve Pressure gage Temperature control External water level glass gauge Foot switch controlGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused1853-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152446-used-1853-700-welch-100-psi-industrial-heavy-duty-jewelry-electric-steam-cleaner-electric-foot-pedal-control3995721" x 24" x 31"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ddf95cf6ebdaa3202e41b31560650385/original-IMG_4083-e1651868947655.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb4f3624e57c9d076a938a8b2873a39a/original-IMG_4084-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a4be6e1215644d38cada9d2978c9586/original-IMG_4085-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4b9de27b4e3c2d9c9312368d4cdcb8b/original-IMG_4086-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b364f877b488d22ef8b59faaa33451d/original-IMG_4087-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6627e6950cfe0b5bd31ebf4c400cd756/original-IMG_4088-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ac3d0e6d485081dc54874bf57bf3304/original-IMG_4090-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cba31ecd8954c3b046d31c425ba4a60/original-IMG_4083-1-768x1024.jpg2024-09-25 15:41:53 UTC6152447Motor voltage 220 3PH 50/60hz Model 1098 Year of MFG 1998 Strip thickness from 0.1 to 0.6mm. Max strip width 18 mm. PROCESSABLE DIMENSIONS Strip from 0.1 to 0.6 mm thick, Max 18 mm wide Equipped With: This machine is lodged on a solid steel column and is able to round calender and, at the same time, profile into different shapes bands for the production of earrings, bangles, chokers and rings. The machine is provided with a set of interchangeable rollers.. The diameter of the product can be changed by simply operating on a pin. This way the machine is able to produce various sizes of earring, bracelets and rings using just a single tool. Moreover, during the process, the machine is able to design fancy engravings on the strip according to customers specific requirements.General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused6761-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152447-used-6761-700-gb-meccanica-round-calender-machine-for-strip-round-winding-decoration-on-earrings-bangles-chokers-rings0.25220mm x 320mm x 520mm35 Kg30 rev / minhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbffe8b7498c8070792a80fff7eb835d/original-IMG_5508-e1656606490439.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fadcb104e99d42e4a9e966b7b647d6d5/original-IMG_5515-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f514d8c7d121a695950650ac235b11b0/original-IMG_5516-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4e10a8ff5bb8d764f41f34d56418336/original-IMG_5533-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84356b2897ffbe8e3c1a7763741eeb4c/original-IMG_5508-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66f3df0a110a52ae6844a7af80dae1fc/original-IMG_5510-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ca5fc05eb494feb4fe610066c39e1f8/original-IMG_5511-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d55d32d92ca8c1eb7fe952a4d0416cf4/original-IMG_5512-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4ceaab00e89cc41b600ac2e829ab60e/original-IMG_5513-768x1024.jpg2024-09-25 15:41:54 UTC6152448110V/1PH/60HZ Equipped With: Wire feed and guide Pneumatic parts ejector Steel standGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused2463-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152448-used-2463-140-jewelry-earring-fusion-post-making-machine-027-x-3-8-long-earring-post.027" x 3/8" long earring posts1/3 HP30" x 23" x 60" high375 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9c25cd8045bd58b8e723675d99cd8fb/original-IMG_2597-e1503509365447.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5f5ea95f3c423f1a012c8b55d727276/original-IMG_2600.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10feb93161d44ce979ac3e3fdf3054b2/original-IMG_2601.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42a28406b4ee287afa40bb02914bb794/original-IMG_2602.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abdd6da10836048e776bb2c2f93d5540/original-IMG_2603.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c6d491d56a6a5675a82cf8054d0392f/original-IMG_2604.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22721c93aa3a1d55b83f2256da0e662d/original-IMG_2605.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00c2b71a4d69029ad930c6c1a5344876/original-IMG_2606.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/978bae699a5030bfc86f3c053b1ee905/original-IMG_25971.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/763c6eb4055d91a991d4c9ceab7947a0/original-IMG_2598.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0847c00b840c7371d86f562f0645ddaa/original-IMG_2599.jpg2024-09-25 15:41:56 UTC6152449110V/1PH/60HZ Equipped With: Vacuum switch Heating switchGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused2577-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152449-used-2577-400-vacuum-heat-sealer-vacuum-base-table-size-4-1-2-x-4-1-24-1/2" x 4-1/2"5-1/2" x 5-1/2"9-1/2" x 10-1/2" x 15" high20 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/625e963345461704d120747cfb2bdeef/original-351-e1509376323147.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25623c67e531c78aa727110c380a0696/original-357-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51b47806bd5861883a4d160dba362327/original-3511-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2d7b11ddfc3ff0c6655f2b7175aad49/original-353-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f53f4ba8f2e0235f645d094d4da8d13/original-355-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc6fe51e8a1dafff78fbace5b6755883/original-356-768x1024.jpg2024-09-25 15:41:54 UTC6152450110V/1PH/60HZ Digital readoutGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused7338-380Pawtucket, RIhttps://www.goldmachinery.com/listings/6152450-used-7338-380-mettler-digital-platform-scale-model-pm-34-s-n-1197374000G/5000G1G/1G14" x 10"14" x 14" x 6" high35 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77723e69fd839324fe80220d4a67ed16/original-7338-002-e1386345139393.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/698d8489141214a81c44cacf96528437/original-7338-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6fea63d9a5abfcee72ccb093d86f5918/original-7338-0021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/130034d962cbd0c4b8fc1ce92d92636a/original-7338-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2dcd8d897bcd6fbe4e40d3591f929b7/original-7338-004.jpg2024-09-25 15:41:54 UTC6152451See photos attached THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1987-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152451-used-1987-390-stamping-press-tool-die-set-to-make-a-finding.188".210"9" x 8"20 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c320e869e9fcda462cb078cb3287f93/original-PIN-FINDING-1-MAIN-e1449754388476.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bc6b94f600ed44b042efb600b1348bc/original-PIN-FINDING-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a9aed1dd36a5cf668795ad831cab3f7/original-PIN-FINDING-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97adadf1948957c2252ac68f0e2abef8/original-PIN-FINDING-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3607962053e7b04ccef16e93737916b5/original-PIN-FINDING-4.jpg2024-09-25 15:41:55 UTC6152452THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1994-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152452-used-1994-390-stamping-press-tool-die-set-to-make-square-and-pin-findings.237" x .237".079" diameter9" x 8"20 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dffdeaeff460d590c687eb6dc3f14e4a/original-SQUARE-PIN-1-MAIN-e1449754211495.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/17bd23dc1bd05fb583aa9a47ee87dfeb/original-SQUARE-PIN-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bbec585d5727b79b1dd4c1873a8bbf46/original-SQUARE-PIN-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c058be4967f493252a05d2c5388930a/original-SQUARE-PIN-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/841a16a0e5d8d83d818659a7e31f4f57/original-SQUARE-PIN-3.jpg2024-09-25 15:41:56 UTC6152453#CR58 THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1986-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152453-used-1986-390-stamping-tool-die-set-to-make-horse-shoe-findings1/2" x 1/2"(approx,)9" x 8"20 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fca1938b8053f519aa45a5b1b90575fb/original-HORSE-SHOE-1-MAIN-e1449753585555.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebe0651f69162c5ad87ce3b6df60fd0f/original-HORSE-SHOE-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0623b4710de3f4dc2acd4c24a9e922b/original-HORSE-SHOE-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d82f33f8eca88993b2f907851bcc233/original-HORSE-SHOE-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23527fc5966c68c770fd687d8e953e80/original-HORSE-SHOE-4.jpg2024-09-25 15:41:57 UTC6152458THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1993-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152458-used-1993-390-stamping-press-tool-and-die-set-to-make-pig-back-jewelry-pendant5/16" x 3/16"9" x 8"30 Lbs (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1fbe25655b4ff7c31427d7ba373a291/original-PIG-BACK-1-MAIN-e1427906201432.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/104609dade348e82beb5a9da0053673e/original-PIG-BACK-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b776c3545c26b46e3f608027dd6a08dc/original-PIG-BACK-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0dbcc4087f9c6e0d052f870d28bc123/original-PIG-BACK-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75dfe4e9dd6ac09062cbe6a70af938e3/original-PIG-BACK-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/940d2ce6b8dd105646281fb1bc79b633/original-PIG-BACK-4.jpg2024-09-25 15:41:58 UTC6152459THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1988-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152459-used-1988-390-stamping-tool-die-set-to-make-a-triple-slim-cap.376"9" x 8"20 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2312e1e60c00782a532525b03f96f4ff/original-TRIPLE-SLIM-CAP-1-MAIN-e1449753875585.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f954712b4dd63c9a29e0ba3eb3b2d7cf/original-TRIPLE-SLIM-CAP-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66de34193212af2fc0c79e0d0fbb3f84/original-TRIPLE-SLIM-CAP-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e2f74cd6bc224d0fd16de5bf656ad35/original-TRIPLE-SLIM-CAP-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e918e18d3d58d944c50ce8472f026aee/original-TRIPLE-SLIM-CAP-4.jpg2024-09-25 15:41:56 UTC6152460Includes a Parts Chute and Pneumatic Ejector Valve THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1992-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152460-used-1992-390-stamping-press-tool-and-die-set-to-make-creole-hinge-for-hoop-earring3/8" x 3/16".2008" x 6"13-3/4" x 9"30 Lbs (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d359f6b02ab5d36f762e2214e1d9b2be/original-hinge-1-main-e1427906014120.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d035e01261710bb22c955588ac41bad0/original-hinge-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/090796f0be6f6c2bd7ffaece5fb36fa2/original-hinge-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0abb0bfc50adb42c4d435b00988f20b6/original-hinge-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c97d22e67541cb8ba6a7eca9c944a27b/original-hinge-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05e87c36706ea4c6306082260037f91d/original-hinge-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff4c2147dcb518250ef0c878e6583a3e/original-hinge-5.jpg2024-09-25 15:41:59 UTC6152461As per photos attached THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1956-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152461-used-1956-390-stamping-press-tool-and-die-set-to-make-cr11-creole-finding9" x 8"30 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58f2ab024d0fa638ab7dbd9a5fbad4ee/original-die-1-e1419428067213.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88c9b7c36eec7a46469105deebf24b09/original-die-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf7299b59c2d12d02ed901a83fbed317/original-die-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34fcbdf4f2dffefe2f352357df92e2a8/original-die-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/270f80e21d593123b134cf5b1def35ed/original-die-4.jpg2024-09-25 15:41:58 UTC6152462THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1957-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152462-used-1957-390-stamping-press-tool-and-die-set-to-make-small-bunny-rabbit-finding.3509" x 8"30 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a66bf80826de83c4a85ee54a13000110/original-Bunny-1-main-e1419428321854.jpg2024-09-25 15:41:56 UTC6152463THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1954-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152463-used-1954-390-stamping-press-tool-die-set-to-make-finding.350"9" X 8"30 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/299834bd7742538a02ade7582fd5076a/original-FINDING-1-MAIN-e1419427886742.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f5b9c616baf7fa636aa56c619ab2052/original-FINDING-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8f16c98bfe9f71bc9917da11e3efcb1/original-FINDING-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/020683273fafeb2c31599cf03393a7f0/original-FINDING-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3cbec7b515138bd8b74220ec3ab84f8d/original-FINDING-3.jpg2024-09-25 15:41:59 UTC6152464THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1952-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152464-used-1952-390-stamping-press-tool-die-set-to-make-rabbit-finding3/4" X 3/8"9" X 8"30 lBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08f06d2af86135d2568b6f6ff5d1cefa/original-RABBIT-4-e1419427696313.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef2decca0ba28fb973c3e078874c722a/original-RABBIT-1-MAIN.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97156c206b458b9884a884e853e1f211/original-RABBIT-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f650a116a783b1a2befce8e6d1fc8b2/original-RABBIT-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/828b3fff7432bd14a09526ae4f672c6c/original-RABBIT-41.jpg2024-09-25 15:42:00 UTC6152465THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1958-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152465-used-1958-390-stamping-press-tool-and-die-set-to-make-small-religious-cross13/16" x 1/2"9" x 8"30 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/16a9ea1b81d6ce5fa04aa0099a117851/original-small-cross-1-main-e1419428442651.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/38afc6ff16e63b439b65a117c29d74c4/original-small-cross-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1cc7af2c348e8b1ff9ca9025ad0306c/original-small-cross-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa42e40b6c64e6b8256f1317d6b27d87/original-small-cross-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4c3fd7ea4c371bc211eae1ea6951f29/original-small-cross-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e449346143eacef50ccc54b288486a49/original-small-cross-5.jpg2024-09-25 15:41:59 UTC6152466SPECIFICATIONS AS PER PHOTOS THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1949-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152466-used-1949-390-stamping-press-tool-die-set-to-make-small-blob.575"9" X 8"30 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58a8eca6b317cf2d5bd78e24f72fc5ff/original-BLOB-3-e1419427057797.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63d6e029e8b7ceffa0ed0d2d10707beb/original-BLOB-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d9918a13400759fb22ad209b1692cfb/original-BLOB-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b453df6da9cfc8f30888d2628ec4bc07/original-BLOB-1-MAIN.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7e0465d0bcc288ca0d7d8dfa73a522c/original-BLOB-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e224b46f3514d92aa941792a7b7a2a8/original-BLOB-31.jpg2024-09-25 15:42:01 UTC6152468THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1991-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152468-used-1991-390-stamping-press-tool-and-die-set-to-make-elephant-rear-view-jewelry-pendant5/16" x 1/4".3509" x 8"30 Lbs (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57cf54f67412c1cecddf697e45fdd106/original-ELEPHANT-1-MAIN-e1427905818519.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04d5a44a869adbe1aecde21a8207a959/original-ELEPHANT-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/effd2fbc7d194318d864b50979999c15/original-ELEPHANT-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37becc8d704834456307d538c05975e2/original-ELEPHANT-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7d2886946d6a294ba735afe44e34aff/original-ELEPHANT-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f49f9f9316c83350d1994a49191bc977/original-ELEPHANT-4.jpg2024-09-25 15:41:58 UTC6152469THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1950-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152469-used-1950-390-stamping-press-tool-die-set-to-make-religious-cross1" X 5/8".450"9" X 8"30 LBS.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d25c0034291370201d931465bebbcf6/original-CROSS-1-MAIN-e1419427473545.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b10f1f979882bdc258ae615933e8bcf/original-CROSS-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/996bacfb74c11659f3c3044544d9e29d/original-CROSS-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7caf39ed83b4764c5b50f8a8be1f6125/original-CROSS-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/944a816db590689972f9903f233a5b06/original-CROSS-4.jpg2024-09-25 15:42:01 UTC6152470General Jewelry MachineryMiscellaneous Tools & Diesused1633-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152470-used-1633-390-stamping-press-tool-and-die-to-make-jesus-blank9" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2616e18dce967ea71e0100195b3ff67/original-jesus-blank-1-main-e1405080031680.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e395189713ee7e98c1e27938c2456d2/original-jesus-blank-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b7eba0ba1cd90df6b67aeb45a7688ff/original-jesus-blank-1-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfa0d7eb7ecb927eb176229ac74b5b33/original-jesus-blank-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/664a5fbeb258be93fa08d945224e75c3/original-jesus-blank-3.jpg2024-09-25 15:42:01 UTC6152471General Jewelry MachineryMiscellaneous Tools & Diesused1632-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152471-used-1632-390-stamping-press-tool-and-die-to-make-heart-with-cutout-heart9" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f482f0f4274dba66203270cd78b64316/original-HEART-WITH-CUTOUT-HEART-1-MAIN-e1405079878638.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2821a58cb5a179c320b5fab0822da4db/original-HEART-WITH-CUTOUT-HEART-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7c9f1781e2ebe0774201753dd95d737/original-HEART-WITH-CUTOUT-HEART-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0cda202f208a328a5abbd5257d6a32cb/original-HEART-WITH-CUTOUT-HEART-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/660e4b1223a29678eb9e2276ac22c979/original-HEART-WITH-CUTOUT-HEART-4.jpg2024-09-25 15:42:01 UTC6152472General Jewelry MachineryMiscellaneous Tools & Diesused1631-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152472-used-1631-390-stamping-press-tool-and-die-to-make-diamond-pitch-4709" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6beb1777249371fd53ef83405f214943/original-DIAMOND-1-MAIN-e1405079695525.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e4a8de1fa31ad130d0a90d02a9dc490/original-DIAMOND-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/838e667041bde5e2aa44439c45e032f8/original-DIAMOND-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c1b3bdf2489d67a75218e2dc032200f/original-DIAMOND-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bd6b91e9fe2205aa4a1b6dc6aa1d143/original-DIAMOND-2.jpg2024-09-25 15:42:01 UTC6152473General Jewelry MachineryMiscellaneous Tools & Diesused1630-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152473-used-1630-390-stamping-press-tool-and-die-to-make-female-gender9" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5b2f2d22062ce68393537b8058c874e/original-FEMALE-GENDER-1-MAIN-e1405079490110.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f1935ec482f0bbd2a606d32054cba5c/original-FEMALE-GENDER-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f96d8ad3963881721929c02233782ea/original-FEMALE-GENDER-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d2af031fc0cfe9192600590692cf791/original-FEMALE-GENDER-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a14d1c02df515585f5ef14c825b5656/original-FEMALE-GENDER-4.jpg2024-09-25 15:42:02 UTC6152474THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1575-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152474-used-1575-390-stamping-press-tool-and-die-to-make-small-heart-jewelry-pendant9" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b41a1720453b91504794ce5cc3518fc0/original-heart-4-main-e1403269219987.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27b44245fa124b5b223cd5935b646a52/original-heart-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a39ef6f504b91d0fdfa7ab5a7918f9ef/original-heart-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb511cc4ab6594da9111873e5515561e/original-heart-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e4f52a2f36787f44f0cb23b78256abc/original-heart-4-main1.jpg2024-09-25 15:42:02 UTC6152475THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1572-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152475-used-1572-390-stamping-press-tool-and-die-to-make-religious-cross-jewelry-pendant1-1/8" x 3/4"9" x 8"30Lbs  (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fccce262aa3259c4533f0fc001fdeff/original-NUMBER-2-CROSS-1-e1403268164442.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4eb78a727f6495e2f4ec65f4a33c6089/original-NUMBER-2-CROSS-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/557686551c59fdef0110bba754a4971b/original-NUMBER-2-CROSS-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/660baebb94c92655ba462f676029af1b/original-NUMBER-2-CROSS-11.jpg2024-09-25 15:42:03 UTC6152476THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1573-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152476-used-1573-390-stamping-press-tool-and-die-to-make-triple-row-slim-cap-290mm9" x 8"30Lbs  (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23a175d540b01407973ee2f26a93a570/original-TRIPLE-ROW-1-e1403268305278.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88c244f51e56fe22055ec9e1ff2878cc/original-TRIPLE-ROW-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba508afef424e71a64829e4140de397b/original-TRIPLE-ROW-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4f2e84cfa8d86359be7e9a453c78eec/original-TRIPLE-ROW-3.jpg2024-09-25 15:42:02 UTC6152477Model Pro 2013 Available Ex-Factory, USA Priced for... $7,000.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew2013Pawtucket, RIhttps://www.goldmachinery.com/listings/6152477-new-goldpro-pro-ultrasonics-model-2013-ultrasonic-cleaner-16-gallons120 Volts, 15A16 Gallons2400 watts peak / 1200 watts average800 watts480" (with lid open) x 25" x 36"20" x 13" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b044257e5742a5e4891c271704951625/original-unnamed-24-e1570033524937.jpg2024-09-25 15:42:01 UTC6152478THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1574-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152478-used-1574-390-stamping-press-tool-and-die-to-make-wool-mark-jewelry-pendant9" x 8"30 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/669767629e0453e83c79d4fd7242aed7/original-woolmark-4-main-e1403268771454.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96ed04cb9243d42dbed8364158399c8d/original-woolmark-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a8ecfc022d7e673e4a5fb2eda632127/original-woolmark-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de44be7f52c9b7d05d49cf7b9b8398d4/original-woolmark-4-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33c7955bcb10ca796cab38f2e0faf066/original-woolmark-1.jpg2024-09-25 15:42:02 UTC6152479Model Pro 907 Available Ex-Factory, USA Priced for... $1,400.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic CleanersnewPro 907Pawtucket, RIhttps://www.goldmachinery.com/listings/6152479-new-goldpro-pro-ultrasonics-model-907-ultrasonic-cleaner-1-gallon110 Volt1 Gallon400 watts peak / 3.. watts average250 watts24" (with lid open) x 13" x 18"9" x 7" x 18"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dd432fa76739c0bc417ff735f16227d/original-PRO-6-e1571924823808.jpg2024-09-25 15:42:02 UTC6152480Model Pro 3216 Available Ex-Factory, USA Priced for... $9,000.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew3216Pawtucket, RIhttps://www.goldmachinery.com/listings/6152480-new-goldpro-pro-ultrasonics-model-3216-ultrasonic-cleaner-31-gallons208-220 Volts31 Gallons3600 watts peak / 1800 watts average3000 watts70" (with lids open) x 27" x 36"32" x 16" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c0d57fdb927429d2979d6147ba327ec/original-unnamed-21-e1570031799263.jpg2024-09-25 15:42:01 UTC6152481Model Pro 2013D Surface Skimming Dual Filtration Available Ex-Factory, USA Priced for... $9,000.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew2013DPawtucket, RIhttps://www.goldmachinery.com/listings/6152481-new-goldpro-pro-ultrasonics-model-2013d-ultrasonic-cleaner-23-gallons120 Volts23 Gallons2400 watts peak / 1200 watts average1000 watts20" (with lid open) x 30" x 36"20" x 13" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c21672adb16a5f87bb83880e828a6f55/original-unnamed-23-1-e1570033408253.jpg2024-09-25 15:42:02 UTC6152482THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALSGeneral Jewelry MachineryMiscellaneous Tools & Diesused1571-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152482-used-1571-390-stamping-press-tool-and-die-to-make-religious-cross-jewelry-pendant1" x 5/8"9" x 8"30Lbs  (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3be94e6004c56415df2f5247e9e1093/original-NUMBER-1-CROSS-1-e1403267914319.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50c37651bf46a686e5943fa1174f15f1/original-NUMBER-1-CROSS-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c99f81870aa28f67b9de1c987b9bb61c/original-NUMBER-1-CROSS-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3de7ba06f7280dcc49c6a1f8194ccb15/original-NUMBER-1-CROSS-2.jpg2024-09-25 15:42:03 UTC6152483Model Pro 2013 Available Ex-Factory, USA Priced for... $1,700.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew1208Pawtucket, RIhttps://www.goldmachinery.com/listings/6152483-new-goldpro-pro-ultrasonics-model-pro-1208-3-gallon-capacity110 Volts, 7A3 Gallons600 watts peak / 300 watts average500 watts30" (with lid open) x 13" x 18"12" x 8" x 9"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d13eb5b312de165062c05cfd359f12b/original-120B-e1570117905543.jpg2024-09-25 15:42:02 UTC6152484THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Religious Cross Die SetGeneral Jewelry MachineryMiscellaneous Tools & Diesused0584-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152484-used-0584-390-stamping-press-tool-and-die-set-to-make-religious-cross-jewelry-pendant1-3/8" x 7/8"9" x 8"30 Lbs. (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c2cf93e16ae56b35813dec263b3c57d/original-CROSS-2-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a9075eaaea4774d0112379f56e35940/original-CROSS-2-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/565f863b8387dbebfbe21c8a6c8fe277/original-CROSS-2-3.jpg2024-09-25 15:42:08 UTC6152485THE DIE SET WAS TAKEN FROM SERVICE FROM THE FORMER ACME JEWELLERY COMPANY IN THE UK MAKER OF FINE JEWELRY IN PRECIOUS METALS Religious Cross Die SetGeneral Jewelry MachineryMiscellaneous Tools & Diesused0585-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152485-used-0585-390-stamping-press-tool-and-die-set-to-make-religious-cross-jewelry-pendant1-1/4" x 5/8"9" x 8"30 Lbs. (approx)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9f3fde12556627b6a6baf08b8a734b0/original-CROSS-3-1-MAIN-e1402403736847.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe6d0f2862623e3c51211297ca4f6e54/original-CROSS-3-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc149b289dc3ad3d50a50b7653af5835/original-CROSS-3-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c975b4c78a5166d7c1b061ad03fe34af/original-CROSS-3-2.jpg2024-09-25 15:42:03 UTC61524860Model Pro 1911 Available Ex-Factory, USAPolishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew1911Pawtucket, RIhttps://www.goldmachinery.com/listings/6152486-new-goldpro-pro-ultrasonics-model-pro-1911-9-gallon-capacity110 Volts9 Gallons1200 watts peak / 600 watts average1000 watts40" (with lid open) x 18" x 16"19" x 11" x 10"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db2854a38d0328a72d51ca9197025cf0/original-1911-e1570118188311.jpg2025-05-19 19:23:24 UTC6152487120 volts and UL approved Great for high production plating Heavy duty steel body 30 amp with Work and Anode leads included Product Description This powerful 30 amp rectifier will electro-strip, electro-plate, electro-clean and electro-form to the highest quality standards. Great for high production. Very heavy duty steel body with precise voltage and amperage meters. Save work space and be assured of adequate power for either application. Work and Anode leads included. Output: DC 0-15 volts and CD 0-30 AMPS. Unit standard 120 volts. UL approved to meet or exceed all safety requirements.Polishing, Finishing & PlatingPlating/Electroplatingused5997-350Pawtucket, RIhttps://www.goldmachinery.com/listings/6152487-used-5997-350-blue-star-eurotool-30-amp-rectifier-high-production-jewelry-plating-110-volt24 pounds‎18.2 x 12.4 x 12.4 incheshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/509a142e6c8681d121f4c53a4bf38c53/original-1-2-e1659100330282.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1536d5f5dc37463b99e00ddaaab24df6/original-IMG_5752-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adcf369015cdb4e0f44cfea548f6496f/original-1-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27626259e7b87e1b1411c3d91ca543b5/original-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d53f095ccad864db349af6389c60f23/original-IMG_5750-768x1024.jpg2024-09-25 15:42:04 UTC6152488Model Pro 2012T3 Available Ex-Factory, USA Priced for... $4,800.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew2012T3Pawtucket, RIhttps://www.goldmachinery.com/listings/6152488-new-goldpro-pro-ultrasonics-model-pro-2012t3-12-gallon-capacity120 Volts12 Gallons1200 watts peak / 600 watts average1000 watts43" (with lid open) x 14" x 15"12" x 7" x 11"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/774c79f2d4d24939513c541582c96d62/original-2012T3-e1570118436295.jpg2024-09-25 15:42:02 UTC6152489Model Pro 2013D2 Surface Skimming Dual Filtration Available Ex-Factory, USA Priced for... $18,500.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew2013D2Pawtucket, RIhttps://www.goldmachinery.com/listings/6152489-new-goldpro-pro-ultrasonics-model-2013d2-ultrasonic-cleaner-46-gallons208-220 Volts23 Gallons2400 watts peak / 1200 watts average2000 watts104" (with lids open) x 30" x 36"20" x 13" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c248100c89aa198f0b903dfe8aa8f31c/original-unnamed-e1570032706284.png2024-09-25 15:42:02 UTC6152490120 volts and UL approved Great for high production plating Heavy duty steel body 30 amp with Work and Anode leads included Product Description This powerful 30 amp rectifier will electro-strip, electro-plate, electro-clean and electro-form to the highest quality standards. Great for high production. Very heavy duty steel body with precise voltage and amperage meters. Save work space and be assured of adequate power for either application. Work and Anode leads included. Output: DC 0-15 volts and CD 0-30 AMPS. Unit standard 120 volts. UL approved to meet or exceed all safety requirements.Polishing, Finishing & PlatingPlating/Electroplatingused5998-350Pawtucket, RIhttps://www.goldmachinery.com/listings/6152490-used-5998-350-blue-star-eurotool-30-amp-rectifier-high-production-jewelry-plating-110-volt24 pounds‎18.2 x 12.4 x 12.4 incheshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4aa4bbb96176db12ebef7661d8394035/original-IMG_5748-e1659100698793.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bfdd2a1e2c1d7b6dda7556a1d3f5aaa/original-IMG_5751-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c21da7a926b8b68084f990179da9a85c/original-IMG_5747-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bc3c8b101f1632d1f22f66491ea4917/original-IMG_5748-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e0dc31461b5d6afe4af264f4554ad9c/original-IMG_5749-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae8f283aa03ca3258794580ec54eae4a/original-IMG_5750-1-768x1024.jpg2024-09-25 15:42:05 UTC6152491115 Volts/60Hz and 115 Volts/50Hz POLISHING UNIT Weight: 42 lbs. - ( 19.5 Kg )Dimensions: 15 3/4" wide x 7 7/8" deep x 8 3/4" high ( 40 cm x 20 cm x 22.2 cm ) A full 1/3 HP, 1725/3450 rpm two-speed polishing lathe Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks Two speed 1725/3450 rpm High base polishing motor with 6" shaft height Built to accommodate larger diameter buffs and chuck accessories Provides added torque for the frequent polisher Equipped With: Handler Dust Collector in base - 3/4hp 1 PH Self-Contained W/Filter BagsPolishing, Finishing & PlatingPolishingused3662-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152491-used-3662-340-red-wing-28h-double-end-polishing-unit-1-3-hp-2-speed-1725-3450-rpm-with-handler-dust-collector-base48" x 29" x 56" high250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/425fb19e4f5e42b59fbb43c2ac8e5c76/original-IMG_3059-e1629817261608.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e5fe89410512e1a51a61b81fb715025/original-IMG_3064-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66d329157e88879016ad78a6ff0bac2a/original-IMG_3059-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3344b71effaa94471efbe2665f60cd03/original-IMG_3060-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/181023a191d844b8aa79b86c5fadfb53/original-IMG_3061-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3a27eb4ee0e4afd1b448432aeb9f567/original-IMG_3063-768x1024.jpg2024-09-25 15:42:05 UTC6152492208v 3 phase 50/60 cycle 1-1/2 Hp 3000//3600 RPM Baldor Motor Polishing and Buffing for Metal and Plastic Overall size 45" x 45" x 56" Estimated weight 550lbs Equipped With: 7" Polishing wheel Left Side 9" Buffing wheel Right Side Self contained dust collecting floor model systemPolishing, Finishing & PlatingPolishingused5910-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152492-used-5910-340-baldor-dual-spindle-1-1-2-hp-buffing-polishing-machine-with-dust-collector-systemhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4490af2fb23d61768ddc9800794d20ca/original-IMG_8694-e1695819824191.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9f2f19cecd0ca4ca7f70431f858ce01/original-IMG_8701-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa10a00d125e389d694851469d3ee8ad/original-IMG_8694-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a677c9b4b15d6a0d22d59a8dede8c72/original-IMG_8695-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f61ea3545e90a9a522b3f14f0e8f711b/original-IMG_8697-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fde7534523c7d34a28360d3dcc3597a/original-IMG_8699-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a198d87877c11c53a73caf1a2cbf63b1/original-IMG_8700-768x1024.jpg2024-09-25 15:42:05 UTC6152493115 Volts/60Hz and 115 Volts/50Hz POLISHING UNIT Weight: 42 lbs. - ( 19.5 Kg )Dimensions: 15 3/4" wide x 7 7/8" deep x 8 3/4" high ( 40 cm x 20 cm x 22.2 cm ) A full 1/3 HP, 1725/3450 rpm two-speed polishing lathe Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks Two speed 1725/3450 rpm High base polishing motor with 6" shaft height Built to accommodate larger diameter buffs and chuck accessories Provides added torque for the frequent polisher Equipped With: Handler Dust Collector in base - 3/4hp 1 PH Self-Contained W/Filter BagsPolishing, Finishing & PlatingPolishingused3646-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152493-used-3646-340-red-wing-28h-double-end-polishing-unit-1-3-hp-2-speed-1725-3450-rpm-with-handler-dust-collector-base48" x 29" x 56" high250 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aff6e5811aeb395e006347850ecbcfa1/original-IMG_3052-e1629816834211.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b94059e489c14528c03aade8038ac88/original-IMG_3057-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b55d70f634e45fcc07cccf0e91e6f1c0/original-IMG_3052-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed2fd02bc97f99911da6eff372be2c8d/original-IMG_3053-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a53d50ac3327c5c8844f60fdba4a1ce2/original-IMG_3054-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d5baf087826912708b7a168fdff3c64/original-IMG_3056-768x1024.jpg2024-09-25 15:42:05 UTC6152494-10 Amp Rectifier 117 VOLTS Input/ 5 Amp Equipped With: -Internal Pump to Chamber for pumping solution to a cathode. -Resin Filter 11" H X 4"Diam. -55 Gal Drum Poly Pro -2 Water Treatment Tanks Poly Pro Each holds 6.6 Gals For more information, contact: Technic Inc. Equipment Div Sales 401-728-7081 Cranston, RI 02910Polishing, Finishing & PlatingPlating/Electroplatingused5038Pawtucket, RIhttps://www.goldmachinery.com/listings/6152494-used-5038-350-technic-model-epm-10-precious-metals-recovery-unit12 Volts @10 Amp18 X 18 X 18"1 1/4 HP 110 Volts 1 Ph150 PSIG120 Degrees Fhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/139562e5dd843e4931962412439a1643/original-5038.jpg2024-09-25 15:42:02 UTC6152495Consisting Of: 2 - Northcott Model HDPOL Single End 3/4 HP Polishing Motors with Hood 1 - Northcott Vertical Split Lap Machine, 3/4 HP 1 - Hood & electrical hook up for aditional Split Lap Machine 1 - Northcott 3 HP, Bag Type Dust Collector Model # JN1 3000, S/N 3131 Chamber Silencer Less filters Estimated weight(entire set up) 750 lbs.Polishing, Finishing & PlatingPolishingused2375-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152495-used-2375-340-complete-polishing-set-up-4-person-with-dust-collector60" x 25" x 48" high300 CFM3" diameter28" x 28" x 54" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2ff733a6a5196674f78d570e5544ec7/original-Equip-View-2-1-1-e1535038561120.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09f0d6be1bd1c6aa5dc58380c3a9a0d5/original-IMG-7889-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/396d3dc32ccc97a5c75c219b69bab802/original-IMG-7890-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d54692676f0a095a70defea7192a4286/original-IMG-7891-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e3449196ab2de11b8d016d3ae4e3edb/original-IMG-7892-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89d0120968d4c3510d6cc2c46d8cbf1c/original-IMG-7893-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df315bad7bc7b4501320e5b7aeb2256c/original-IMG-7894-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfeb99aa8c01567b0f4822bb5e35fdda/original-Equip-View-2-1-1-1-1024x734.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c9919659b411e655fcc21f6032bd41b/original-IMG-7883-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/923e10a667c47d082a763a1e59afa6e4/original-IMG-7884-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98b4524a7c9e313024e1dec615087c55/original-IMG-7885-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b769c1940cdad4e6888938fbcd8a338/original-IMG-7886-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da62fa93e87be299b9eb7a755c54c4a4/original-IMG-7887-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1bd279dafaab7e7a397072a1a141e06/original-IMG-7888-1024x768.jpg2024-09-25 15:42:10 UTC6152496Model Pro 3624 Surface Skimming Dual Filtration Available Ex-Factory, USA Priced for... $15,000Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew3624Pawtucket, RIhttps://www.goldmachinery.com/listings/6152496-new-goldpro-pro-ultrasonics-model-324-ultrasonic-cleaner-65-gallons208-240 Volts65 Gallons7200 watts peak / 3600 watts average4000 watts50" x 40" x 36"36" x 24" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1cb2ca106ea680113ca162244d25fef/original-33-768x612-e1572880541744.png2024-09-25 15:42:02 UTC6152497115V/1PH/60HZ With hoodsPolishing, Finishing & PlatingPolishingused2143-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152497-used-2143-340-custom-built-bench-top-model-dayton-double-end-polishing-machineDayton, 1/3 HP30" x 18" x 14"  high80 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d84c0656d0b8c0402baee843abcd7fb6/original-IMG_69132-e1461590816810.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dbd1658e1b9d4200e68827602a20011/original-IMG_69133-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41ebba9edf6a8f979181eeb7682975d1/original-IMG_6911-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d0251e5117108604cc9e24c45007c30/original-IMG_6912-1024x768.jpg2024-09-25 15:42:05 UTC6152498220V 3 PH 50-60HZ USA - 60 HZ = 3600 RPM W/Variable Speed motor drive system Outside USA 50 HZ = 3000 RPM W/Variable Speed motor drive system Double end , 2-spindle Equipped With: Downdraft Table Work bench X2C AC Inverter variable speed control 4 New Polishing wheelsPolishing, Finishing & PlatingPolishingused3178-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152498-used-3178-340-baldor-variable-speed-motor-polishing-set-up-with-down-draft-table-work-bench1/2 HP,45" x 25" x 55" high220 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3230c98df7c79969f8b5fa2a0736a102/original-IMG_5496-e1555617810928.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c550156d6f255dec913d9d8fa5b7e71e/original-IMG_5496-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0da0611f90f43bc240477cb975882118/original-IMG_5498-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ea3d7ffd6c24b4feb6574d9dd0a1e9e/original-IMG_5499-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3b9f914f31db2a77edd2a297867fddb/original-IMG_8323-e1584992325247-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5d96c67ed4899b7bbdd0fab12c52670/original-IMG_8326-e1584992343461-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73c7b1e4699e375f3ea2792299db7a34/original-IMG_8327-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/960be8c0dc2046d9b567b2705a75bb9e/original-IMG_8328-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/918b124455111c5cd0b256a879368426/original-IMG_8329-1024x768.jpg2024-09-25 15:42:07 UTC6152500110V/1PH/60HZ 1/4 HP Equipped With: Handler enclosure Wood standPolishing, Finishing & PlatingPolishingused7218-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152500-used-7218-340-red-wing-double-end-grinder-polisher-model-26-s-n-816-208821725 RPM50"(w) x 23"(D) x 56"(H)200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca98044b33350f858d2f7eaf014a7040/original-7218.jpg2024-09-25 15:42:06 UTC61525010- Model FM 6000 - Voltage / 110 / 1 Phase - Capacity (cu. ft.)3.0 - Bowl Depth (inches) 10” - Width (Inches) 35” - Height (Inches) 46” - Channel Width (Inches) 10” - Bowl Dia. (Inches) 32” - Motor Horsepower 1/2 Equipped With: - Adjustable amplitude - No belts or pulleys - Powder-coated finish - Solid urethane bowl - Drain plug & unload door - Ribbed bowl wallsPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused5973-210Pawtucket, RIhttps://www.goldmachinery.com/listings/6152501-used-bel-air-finish-master-vibratory-finishing-machine-fm6000-3-cu-fthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d025522e9a4fefdc1a8a1f7765f4cd91/original-1-e1663261060730.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/010ca4b340aaf8ad3edbababb1f1a446/original-IMG_6326-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8da27dcbea432496cacbe9a4167981ab/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bca0f8ce78521559cfed2398e49f977/original-2-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7a19741320680be43fd3970d363c848/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de8eeffd590ed6d9b90d91984c70f184/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/639b04227347aad332b91845fd24f49e/original-IMG_6319-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b10fcb44318aa21fb4684deae8f55bd/original-IMG_6320-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b36431a28795c1701451d4d8ea5b9143/original-IMG_6323-768x1024.jpg2024-11-06 16:23:16 UTC6152502Voltage 220/440 3ph 50/60 cycle Barrel size 25" x 25" x 22"depth Barrel opening 12" diameter Overall size 58" x 44" x 60" Estimated Weight 2250 Lbs Equipped With: Barrel lock Octagon interior angles Electric bole tilt Variable speed control Steel constructionPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused3439-210Pawtucket, RIhttps://www.goldmachinery.com/listings/6152502-used-3439-210-patterson-type-electric-tilt-chain-driven-industrial-pebble-ball-millhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/617c8a31310d22e7c00119e3ce56b8a6/original-image0-e1715797628614.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4da090c91d3bfcfccc735f21b104f29/original-IMG_1829-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfd018bae43589293301b0290b806452/original-IMG_1819-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7899d0ff49972532aa0e04252327b73e/original-IMG_1820-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c64970b3bd45813e4c594fb7afa995b/original-IMG_1821-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d497da65430c8640b0c40456df5519b6/original-IMG_1822-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e701b6f09e643b9ce1e8164ac8ddc9ec/original-IMG_1823-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/371aa0e180f7fb2ebbaf39658bee15de/original-IMG_1824-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cb9b8414040d974677d66688fca9695/original-IMG_1825-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7928ec369368b6937b0e5bb70edc5346/original-IMG_1826-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/832e3213d9cfbdc4d2ea08a1a71586de/original-IMG_1827-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea9514d8a7b468eec185bb8a9dfb7eec/original-IMG_1828-768x1024.jpg2024-09-25 15:42:12 UTC6152504220V / 3ph / 50-60 HZ Made in Italy Basket diameter 270mm Overall size 400mm / 620 mm / 820mm - Height Stainless steel construction Capacity 10KG Year of MFG. 2000 Equipped With: Heating element Temperature control Timer Emergency stop & safety lockPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused4190-215Pawtucket, RIhttps://www.goldmachinery.com/listings/6152504-used-4190-215-lm-finishing-systems-centrifugal-dryer-model-270-made-in-italy-new-2000https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1a2193694f079730a4f9f3934b4faba/original-1-e1641996710829.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/443687e349bb97f1b22c50fec686ee63/original-IMG_4146-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d8027537b0c950100fbc0e1e46ae105/original-1-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df6a3aecd3355aa3f5c12470bbd410a9/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f671a28bb8a51b132d0d872a1da7290a/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f56f78026487aa72d1c3125954f0819f/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae49be87ca47b15ba7f8cb869ddaa66e/original-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93e9799cd737a6bdd7a1f402c9e742b4/original-IMG_4049-1024x768.jpg2024-09-25 15:42:11 UTC6152508Voltage 220/440 3ph 50/60 cycle Barrel size 25" x 25" x 22"depth Barrel opening 12" diameter Overall size 58" x 44" x 60" Estimated Weight 2250 Lbs Equipped With: Barrel lock Octagon interior angles Electric bole tilt Variable speed control Steel constructionPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused3440-210Pawtucket, RIhttps://www.goldmachinery.com/listings/6152508-used-3440-210-patterson-type-electric-tilt-chain-driven-industrial-pebble-ball-millhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52821937767edaa04033503081235645/original-IMG_1753-e1715797355129.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b14330bb77368b67240f94771971e929/original-IMG_1758-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/873511dd4ce303555e9eb3d4eb3a543e/original-IMG_1759-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13de87ba170beba4ee692a3847e04b58/original-IMG_1760-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ce8ce0e2ff17f2b330956bd6d2436c4/original-IMG_1761-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3c282c0c3db16d7504df543e2948daf/original-IMG_1763-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66e1ee294200fe8144769d400f3d0370/original-IMG_1764-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54de673da1f162fed24bee32e1fc77a9/original-IMG_1765-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bf30e7f08bd19be5ff1d1da2b47ba36/original-IMG_1766-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc7bd7a0cdb46bc131a279d47223641f/original-IMG_1752-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b8f62016c9ee01b4d1f4531fed61f41/original-IMG_1753-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da710bfba7d22c04e41357be15b60609/original-IMG_1754-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4816a1fc2126d9c5c6c4e8b95138741a/original-IMG_1755-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a95efceb706631b798deeb7d39c8ebaf/original-IMG_1756-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa3a5855821cb08b5e181e058c41432c/original-IMG_1757-768x1024.jpg2024-09-25 15:42:12 UTC6152510Model Pro 6030LT Surface Skimming Dual Filtration Available Ex-Factory, USA Priced for... $51,500.00Polishing, Finishing & PlatingGoldPro® Pro Ultrasonic Cleanersnew6030LTPawtucket, RIhttps://www.goldmachinery.com/listings/6152510-new-goldpro-pro-ultrasonics-model-6030lt-ultrasonic-cleaner-240-gallons208-240 Volts240 Gallons14,400 watts peak / 7200 watts average12,000 watts (2x 6000 watt heating elements)92.5" x 57" x 99"60" x 30" x 26"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6eb29ab2635425549393a808c8131f26/original-pro-12-768x600-e1572880859538.jpg2024-09-25 15:42:02 UTC61525112001380V/3PH/50HZ FOR DRY FINISHING ONLY Equipped With: Digital control panel Dust collector Emergency stop Bowl dump lever Timer control StandPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused7319-210Pawtucket, RIhttps://www.goldmachinery.com/listings/6152511-used-7319-210-fioa-model-ba170-20-disc-finishing-tumbling-deburring-machine-model-492-01-on-stand-type-bapt7017-1/2" diameter x 10-1/2" deep0,75 KW0 - 260 RPM74 liters50 kg30" x 36" x 62" high1300 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b0223a155838f151c68ce03518e5442/original-8583.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8797cf47c5778c99cd4b329f46669f87/original-DOMET-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e12f0f85a2a168fd2996e300fabd3ee/original-DOMET-0101.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05061086521ab16b01b424edff6c8520/original-DOMET-0121.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07e2fe01b878207dab8380a578e0c618/original-IMG_4140-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8598f20f033eb3a65873c90884eb3f8e/original-IMG_4141-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/955b08c06c5f7df2faf19952ce74f4ea/original-IMG_4143-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0866606ae43d52d64198efffe1b1f8ee/original-IMG_4144-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b10159aa264cae366da08efaac421f56/original-IMG_4145-1024x768.jpg2024-09-25 15:42:15 UTC6152512380V/3PH/60HZ Equipped With: Dust collector stand Additional Photos:Polishing, Finishing & PlatingPolishingused8520-340Pawtucket, RIhttps://www.goldmachinery.com/listings/6152512-used-8520-340-weisert-double-end-polishing-machine0.9 KW, 3300 RPM52" x 31" x 70" high275 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7df50a4edc1e90d33581f0c86c003d5c/original-8520.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ad0c8e7848c220d4476882c4bbc0e8c/original-8520_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64eef36a392af03a7064c5a10cc6fb55/original-8520_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09ae7177899c3ff3d317a33531863029/original-8520_3.jpg2024-09-25 15:42:06 UTC6152513The New Holland Model K-11 Industrial Centrifugal Dryer can thoroughly dry parts in the basket loads weighing up to 7 Lbs (3.1 kg). The parts are air-dried in as little as 15 seconds by spinning them at 1,100 RPM. Heavy-duty 6″ (152mm) diameter baskets are used to handle the parts. One person can easily operate the dryer with full efficiency and safety. You can expects years of clean, quiet-running operation from your New Holland Centrifugal Dryer with proper installation and regular maintenance. Features: Safety interlock switches the motor off when the lid is opened Cover swings in either direction for ample loading clearance Heavy-duty construction of arc-welded steel means years of trouble-free service Exhaust outlet is conveniently located for direct drain connection or drip pans Simple controls permit quick, easy operation Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions Standard Equipment Includes: Special 1/8 HP (0.09 kw) 60 cycle motor Direct drive with operating speed of 1,100 rpm Unit is available with or without a 600 watt heat element Amperage: Starting 10.1 / 10.4, Operating: 6.7 / 7.1 Baskets are available at an additional cost: Please let us know if you would like to add on a basket to your purchase! MODELS AND PRICING: Model K-11 (with Heat Option)……$4,330.00 Model K-11 (without Heat) …….$3,910.00 Availability: Ex-FactoryPolishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersnewK11Pawtucket, RIhttps://www.goldmachinery.com/listings/6152513-new-new-holland-model-k-11-6-x-6-centrifugal-dryer19.5″16 1/8″9 3/8″ x 14″79lbs1,100 rpm1/8 hp6″ x 6″7lbs (3.1 kg)2, tapered rollerDirect CoupledArc-welded Steel Plate110/120 VAC 50/60Hz600 watts switchable electric$205.00$355.00$290.00$288.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cdf10ad901df318edc38e49872c8881/original-k11.jpg2025-01-02 14:34:46 UTC6152514Model Pro 2013DT3 Surface Skimming Dual Filtration Forced Air Dry Available Ex-Factory, USA Priced for... $33,500.00Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip Wringersnew2013DT3Pawtucket, RIhttps://www.goldmachinery.com/listings/6152514-new-goldpro-pro-ultrasonics-model-2013dt3-ultrasonic-cleaner-23-gallons208-240 Volts23 Gallons2400 watts peak / 1200 watts average2000 watts89" x 29" x 42"20" x 13" x 14"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c231ee96855cbc443db440e20494af6b/original-unnamed-1-e1570033003640.png2024-09-25 15:42:11 UTC6152515115V/1PH/60HZ Equipped With: 5-New media parts/Barrels Locking hardware Cycle timerPolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused9699-210Pawtucket, RIhttps://www.goldmachinery.com/listings/6152515-used-9699-210-roam-hi-energy-finishing-machine-for-wet-or-dry-jewelry-parts-finishing-applications1 Gallon24" x 30" x 20" high240 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7677b1a00aafd5986bb7cd6588e6a804/original-9699.jpg2024-09-25 15:42:11 UTC61525172025New HollandK-9414100.0Available Features: - Optional Soft Start control provides a smooth, stepless, reduced-voltage acceleration to minimize scarring and scratching of delicate parts. Tailor the initial torque and timing to your operation; then readjust for different parts loads as needed. - Safety interlock switches the motor off when the lid is opened. - Cover swings in either direction for ample loading clearance. - Heavy-duty construction of arc-welded steel means years of trouble-free service. - Exhaust outlet is conveniently located for direct drain connection or drip pans. - Foot brake stops the spinning action quickly. - Optional electric or steam heaters may be mounted in the cover. - Optional timer provides more control of drying time cycle - Reverse the direction of rotation to remove all moisture from cup-shaped parts. - Optional variable speed control (inside control box) lets you control basket rotation from ten rpm up to the rated operating speed. - Optional temperature control lets you maintain heat within a controlled range to protect heat-sensitive parts. - Simple controls permit quick, easy operation. - Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions. Specifications: - Reversible Control - Grease fittings exposed - Special 3 HP, 3 Phase, 60 Cycle-Ball Bearing TEFC motor, reversing control, electric interlock. All units constructed to meet UL sanction. Electric heat units come with a 3,000/4,000 watt heat element. Dryer units include 5 1/4″ exhaust outlet. MODEL K-94 CENTRIFUGAL DRYER Model K-94, 208V, No Heat …$ 13,300.00 Model K-94, 208V, Electric…$ 14,465.00 Model K-94, 208V, Steam…$ 14,335.00 Model K-94, 230V, No Heat….$ 13,300.00 Model K-94, 230V, Electric…$ 14,465.00 Model K-94, 230V, Steam…$ 14,335.00 Model K-94, 380V, No Heat (50 Cycle)….$ 13,975.00 Model K-94, 380V, Electric (50 Cycle)….$ 15,170.00 Model K-94, 380V, Steam (50 Cycle)….$ 14,975.00 Model K-94, 460V, No Heat…..$ 13,300.00 Model K-94, 460V, Electric…..$ 14,465.00 Model K-94, 460V, Steam…..$ 14,335.00 Model K-94, 575V, No Heat…..$ 13,975.00 Model K-94, 575V, Electric…..$ 15,170.00 Model K-94, 575V, Steam…..$ 14,975.00 MODEL K-94C CHIPWRINGER Model K-94C, 208V, No Heat…..$ 13,300.00 Model K-94C, 230V, No Heat….. $ 13,300.00 Model K-94C, 380V, No Heat (50 cycle)…..$ 13,975.00 Model K-94C, 460V, No Heat…..$ 13,300.00 Model K-94C, 575V, No Heat…..$ 13,975.00 MODEL K-94 FACTORY INSTALLED OPTIONS 208V, 3 HP Variable Speed Control…..$ 4,385.00 230V, 3 HP Variable Speed Control….. $ 4,385.00 380V, 3 HP Variable Speed Control…..$ 5,035.00 460V, 3 HP Variable Speed Control…..$ 5,035.00 208/230V Soft Start Control Package…..$ 2,345.00 460/575V Soft Start Control Package…..$ 2,560.00 Timer for Standard Control…..$ 925.00 Timer for Variable Speed Control…..$ 925.00 Temperature Control (Electric Heat Units Only)…..$ 935.00 Heavy Duty 18×24 Baskets are available at an additional cost: Please let us know if you would like to add on a basket to your purchase! Carbon Steel Baskets Stainless Steel (#304) Baskets Polypropylene (with stainless steel handle) Baskets When requesting information, please specify the electrical system and heating desired, or if you are interested in the K-94C Chipwringer used to spin fluids of chips.Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersnewK-94Pawtucket, RIhttps://www.goldmachinery.com/listings/6152517-new-new-holland-model-k-94-18-x-24-centrifugal-dryer46.5″43″31″ x 40″690lbs625 rpm3 hp18″ x 24″250lbs2, tapered roller2 V-BeltsArc-welded Steel Plate208, 220, 440 or 550 VAC at 60Hz, 380 VAC at 50Hz, 3-phase(Optional) Electric, steamhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c74fb67edd500e8a51659797076b30a/original-k94.jpg2025-02-19 14:33:22 UTC6152518110V / 1-phase / 60Hz Three Canister-type Filters Water Inlet and Outlet Connections Equipped With: Control station built-in pump inlet and outlet filter pressure gauges on/off switch.Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip Wringersused4697-215Pawtucket, RIhttps://www.goldmachinery.com/listings/6152518-used-4697-ecs-environmental-control-system-with-pump-and-filters150 maximum120°F9.35 gallons per filterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e19bf8b718f3950daa149489ad863d83/original-4697.jpg2024-09-25 15:42:12 UTC6152519New HollandK-249215.0The New Holland Model K-24 industrial centrifugal dryer, you can thoroughly dry parts in basket loads weighing up to 75 Lbs (34 kg) in as little as 15 seconds. This is obtained from both air-drying and spin-drying at 825 RPM. Heavy-duty 12″ x 12″ (305mm x 305mm) baskets are used to handle the parts. One person can easily operate the dryer with full efficiency and safety in five square feet of floor space. You can expect years of clean, quiet running operation from your centrifugal dryer with proper installation and regular maintenance. Standard Equipment: - Special 1 HP, 3 Phase, 60 Cycle-Ball Bearing TEFC motor - Reversing control - Electric interlock - All units constructed to meet UL sanction - Electric heat units come with a 3,000/4,000 watt heat element - Dryer units include 5 1/4″ exhaust outlet - Reversible Control - Grease fittings exposed Available Features: - Optional Soft Start Control provides a smooth, stepless, reduced-voltage acceleration to minimize scarring and scratching of delicate parts. Tailor the initial torque and timing to your operation; then readjust for different parts loads as needed - Safety interlock switches the motor off when the lid is opened - Cover swings in either direction for ample loading clearanc. - Heavy-duty construction of arc-welded steel means years of trouble-free service - Exhaust outlet is conveniently located for direct drain connection or drip pans - Foot brake stops the spinning action quickly - Optional electric or steam heaters may be mounted in the cover - Optional timer provides more control of drying time cycle - Reverse the direction of rotation to remove all moisture from cup-shaped parts - Optional variable speed control (inside control box) lets you control basket rotation from ten rpm up to the rated operating speed - Optional temperature control lets you maintain heat within a controlled range to protect heat-sensitive parts - Simple controls permit quick, easy operation - Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions Factory Installed Options are available at an additional cost: Please let us know if you would like to add on to your purchase! Note: Variable Speed Controller Not Available for 575 Volts Units Note: Soft Start is not available in 380 Volts Units Heavy Duty 12×12 Baskets are available at an additional costPolishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersnewK24Pawtucket, RIhttps://www.goldmachinery.com/listings/6152519-new-new-holland-model-k-24-12-x-12-centrifugal-spin-dryer36.5″30.5″24″ x 37″400 lbs825 rpm1 hp12″ x 12″75lbs2, tapered roller2 V-BeltsArc-welded Steel Plate208, 220, 440 or 550 VAC at 60Hz, 380 VAC at 50Hz, 3-phase(Optional) Electric, steamStarting and operating amperage varies with voltage selectedhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f1c1efddecaa2e8cd9c2e0faf8b5385/original-k24.jpg2026-03-11 19:12:17 UTC6152520New Holland K-94 Basket Stainless Steel #8 Mesh 0.063 Wire Size 1/8″ (0.062″) average opening NEW REPLACEMENT COST: $900.Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip Wringersused6736-215Pawtucket, RIhttps://www.goldmachinery.com/listings/6152520-used-6736-215-new-holland-k-94-8-mesh-stainless-steel-basket-18-x-24https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d11cef29469d32dcc1df2fc3c3460f77/original-b-0012-e1363101409191.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0b1f31e3f192b78fb8c7ed30be3dc7d/original-012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81c1436cb7dd54db40e0b48cae379561/original-014-768x1024.jpg2024-10-31 13:33:25 UTC6152521Available Features: Optional Soft Start control provides a smooth, stepless, reduced-voltage acceleration to minimize scarring and scratching of delicate parts. Tailor the initial torque and timing to your operation; then readjust for different parts loads as needed. Safety interlock switches the motor off when the lid is opened. Cover swings in either direction for ample loading clearance. Heavy-duty construction of arc-welded steel means years of trouble-free service. Exhaust outlet is conveniently located for direct drain connection or drip pans. Foot brake stops the spinning action quickly. Optional electric or steam heaters may be mounted in the cover. Optional timer provides more control of drying time cycle Reverse the direction of rotation to remove all moisture from cup-shaped parts. Optional variable speed control (inside control box) lets you control basket rotation from ten rpm up to the rated operating speed. Optional temperature control lets you maintain heat within a controlled range to protect heat-sensitive parts. Simple controls permit quick, easy operation. Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions. Specifications Reversible Control Grease fittings exposed Standard Equipment Includes: Special 2 HP, 3 Phase, 60 Cycle-Ball Bearing TEFC motor, reversing control, electric interlock. All units constructed to meet UL sanction. Electric heat units come with a 3,000/4,000 watt heat element. Dryer units include 5 1/4″ exhaust outlet. MODEL K-90 CENTRIFUGAL DRYER Model K-90, 208V, No Heat …$ 11,125.00 Model K-90, 208V, Electric…$ 12,265.00 Model K-90, 208V, Steam…$ 12,110.00 Model K-90, 230V, No Heat….$ 11,125.00 Model K-90, 230V, Electric…$ 12,265.00 Model K-90, 230V, Steam…$ 12,110.00 Model K-90, 380V, No Heat (50 Cycle)….$ 11,860.00 Model K-90, 380V, Electric (50 Cycle)….$ 12,935.00 Model K-90, 380V, Steam (50 Cycle)….$ 12,755.00 Model K-90, 460V, No Heat…..$ 11,125.00 Model K-90, 460V, Electric…..$ 12,265.00 Model K-90, 460V, Steam…..$ 12,110.00 Model K-90, 575V, No Heat…..$ 11,860.00 Model K-90, 575V, Electric…..$ 12,935.00 Model K-90, 575V, Steam…..$ 12,755.00 MODEL K-90C CHIPWRINGER Model K-90C, 208V, No Heat…..$ 11,140.00 Model K-90C, 230V, No Heat….. $ 11,140.00 Model K-90C, 380V, No Heat (50 cycle)…..$11,860.00 Model K-90C, 460V, No Heat…..$11,140.00 Model K-90C, 575V, No Heat…..$ 11,860.00 MODEL K-90 FACTORY INSTALLED OPTIONS 208V, 3 HP Variable Speed Control…..$ 4,165.00 230V, 3 HP Variable Speed Control….. $ 4,165.00 380V, 3 HP Variable Speed Control…..$ 4,480.00 460V, 3 HP Variable Speed Control…..$ 4,480.00 208/230V Soft Start Control Package…..$ 2,3255.00 460/575V Soft Start Control Package…..$ 2,325.00 Timer for Standard Control…..$ 925.00 Timer for Variable Speed Control…..$ 925.00 Temperature Control (Electric Heat Units Only)…..$ 935.00 Heavy Duty 18×18 Baskets are available at an additional cost: Please let us know if you would like to add on a basket to your purchase! Carbon Steel Baskets Stainless Steel (#304) Baskets Polypropylene (with stainless steel handle) Baskets 3/16″ perf. 9863899 $675.00 Availability: Ex-Factory, Cleveland, OHPolishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersnewK-90Pawtucket, RIhttps://www.goldmachinery.com/listings/6152521-new-new-holland-model-k-90-18-x-18-centrifugal-dryer40.5″37″31″ x 40″615lbs625 rpm2 hp18″ x 18″150lbs2, tapered roller2 V-BeltsArc-welded Steel Plate208, 220, 440 or 550 VAC at 60Hz, 380 VAC at 50Hz, 3-phase(Optional) electric, steamStarting and operating amperage varies with voltage selected$1,35000$1,310.00$1,315.00$1,135.00$940.00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39feebdd8738d3682102306daaebe94d/original-k90.jpg2024-11-11 13:52:09 UTC6152522Nobles centrifugal dryers take the natually occurring physics of gravity and combine it with heat and air flow to produce the best drying results in the industry. During operation, the basket containing the parts is rapidly accelerated, creating centrifugal force. This force is dramatically greater than the natural force of gravity and therefore gives the centrifugal dryer its unique properties and efficiencies. Model Turbo 6 6" x 6" Basket 7 pound capacity 1/4 HP motor 115 volt, 60 cycle Electric heat 1075 RPM operating speed 12-3/4" x 12-3/4" desk top space 68 lb shipping weight. Stainless Steel with Heat 115V: Carbon Steel with Head 115V Stainless Steel with Heat 230V Carbon Steel with Heat 230V Options: Timer package $229. Temperature control package $281. Nobles Manufacturing, established in 1948, has been serving the surface finishing industry for over 40 years by building the finest, most rugged centrifugal parts dryers in the industry. Please note that baskets are sold separately. Polypropylene 6x6 Baskets: 1/16" Perf.....$170.00 1/8" Perf....$170.00 3/16" Perf...$170.00 #40 Mesh...$170.00 #20 Mesh...$170.00 Stainless Steel 6x6 Baskets: #16 Mesh...$295.00 #40 Mesh...$416.00 #60 Mesh....$416.00 Polypropylene with Stainless Steel Liner 6x6 Baskets: #40 Mesh....$210.00 1-1/2" Perf with #40 Mesh liner.... $210.00Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersusedNobles 6"x6"Pawtucket, RIhttps://www.goldmachinery.com/listings/6152522-used-new-nobles-stainless-steel-heated-centrifugal-spin-dryer-model-turbo-6usually 4-8 weekshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2fa4ee2d000f8612d44a5c254162f53/original-IMG_2047-e1464004419851.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/985ac1c6651da93507ab73f1b86be50b/original-IMG_2041.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ad49ea157077956adfb86f381721e5f/original-IMG_2042.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adc6d8d8ea1e873e60c95e2d18188736/original-IMG_2043.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74721a8a3f01a11a8c97afd946572ccd/original-IMG_2045.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/986cf69dd26d9b026cf75c471644c635/original-IMG_2046.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef169e51e36bee4e59e5bc47b7a3a35a/original-IMG_2046_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7eeb395c64b090dd535f36ddc377f279/original-IMG_20471.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/723e0e84c183f5a152a74b6ea54e96df/original-IMG_2053.jpg2024-09-25 15:42:15 UTC6152523Model #A-2 Equipped With: Electric ValvePressesPressroom Equipmentused2031-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152523-used-2031-700-rapid-air-rapidair-press-strip-slide-feed260 Cycles Per Min.65 Lbs.105 Lbs.2"1-1/2"002"-.040"26020 LBS.10 Lbs5" x 12" x 3"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a59c7e8e8870305e8ba9b4d210938cd8/original-inv-028-e1431950788790.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08d35c9cd8f67f74725222b6286c188e/original-inv-031-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1e7055a7007bb9f4d2790023734b228/original-inv-0281-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e0c76d6f985126a2da83e46801995c9/original-inv-029-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c5d6a9d64db876412811c7e4764cdcb/original-inv-030-1024x768.jpg2024-09-25 15:42:15 UTC6152524220V/3PH/60HZ Equipped With: Strip feed stop/measuring device up to 30" Steel stand Emergency stop buttonPressesPressroom Equipmentused1241-200Pawtucket, RIhttps://www.goldmachinery.com/listings/6152524-used-1241-200-motorized-strip-chopper-machine-back-flywheel3" wide strip material160 RPM1/2 HP14"48" x 40" x 60" high1300 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b97e0388a08a25ad57b89b52e9d40a9/original-next-033-e1438102383779.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdc5207d9d3a0f535a19102b8ab53e68/original-next-0421-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a31b2c0044aded1a0915577bb0becd5f/original-next-041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c651f1097e08e8141f820d7fd0b4cbc8/original-next-0381-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84bfd35330dbae364c9dfbba99d1d6f3/original-next-038-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0bfb42edd16033741de31ae9757003c/original-next-0331-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1213fce83e68afd3045264b9d810f5c5/original-next-034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4b745f610a29ec41e5333efeeb7b9af/original-next-036-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bc20e123698a8d7eb8e9c50f10310cf/original-next-037-768x1024.jpg2024-09-25 15:42:18 UTC6152526PRESSPAL110 VOLT / 1 PHASE MAX COIL WEIGHT 3,500 LBS COIL STACK HEIGHT UP TO 36" H PLATFORM 36" W SPEED 0 – 28 RPM APPROX DIMENSIONS 6' H X 5' RL X 4' FB APPROX WEIGHT 1,800 LBS Equipped With: DANCER ARM POTENTIOMETER FORWARD & REVERCE CONTROL CoilMate® Pallet Decoilers Pallet decoiling, a technology pioneered by CoilMate® , has rapidly become standard equipment for the metal stamping and rollforming industries worldwide. CoilMate's patented line of pallet decoilers typically cut coil-changing downtime up to 90 percent or more. In many operations, this increases overall production by one-third or better. The PressPal© pallet decoiler offers job shops and contract stampers a variety of CoilMate/Dickerman© quality and design features at an industry low price. The unit features a small footprint to conserve valuable floor space and allows for a wide range of applications. Features: Regenerative drive controls platform for smooth feeding Outstanding versatility for a wider range of applications Small 54" x 43" footprintPressesPressroom Equipmentused5901-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152526-used-5901-580-coilmate-presspal-pallet-decoiler-36-platform-capacity-350048"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d9d7a93fa9b2f7b226b44bc2a7b58f5/original-IMG_8859-e1697120804993.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/260dd8d330bf485085e392be4d0772ee/original-IMG_8866-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13d7f4f684620cdac282ea3a223aebe7/original-IMG_8859-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/000d0651eb48ab993fd2f409d6345f7c/original-IMG_8860-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae91616196aa67332d07d1e5521c92e7/original-IMG_8862-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a405b570e623d634fca9e0ea2b9edb0/original-IMG_8864-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42025c69d7a7d131b603ae66da952190/original-IMG_8865-768x1024.jpg2024-09-25 15:42:15 UTC6152527220V/3Ph/60HZ Equipped With: Pneumatic clutch Variable speed operation Steel standPressesPressroom Equipmentused7570-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152527-used-7570-580-motorized-heavy-duty-coil-take-up10"12" (expandible)1.5 HP48" x 44" x 70" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86643c62d1ff581317bd4945a49bcbac/original-7570.JPG2024-09-25 15:42:14 UTC6152528110V/1PH/60HZPressesPressroom Equipmentused0984-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152528-used-0984-580-rapid-air-rapidair-motorized-uncoiler-model-r4a-154e400 lbs.6"36" - 44"8" - 16"70 RPM1/2 HP325 lbs.​https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37808bdeffd88b0caaabc29a1fa6fcc0/original-0984-005-e1407432908424.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfe89c709428eb3d4fecb5469fc4383e/original-0984-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b79bf6671560406a099ab463dd6f708/original-0984-0051-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc515c8546e240aaf7fee9a7aed98071/original-0984-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a3bb500caeaea89be3ebb1468c90396/original-0984-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a207319aac8004ce80cefc6f8b7d88d1/original-0984-008-1024x768.jpg2024-09-25 15:42:16 UTC6152529Used to feed flat stock coils to a power pressPressesPressroom Equipmentused0935-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152529-used-0935-580-42-diameter-pan-type-horizontal-stock-payoff-reel42"5"​https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f18bd8bea8bde4e48ab3cf6e9dfbe50/original-pan-026-e1408537848966.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/361d3c5023047869898182032195bf31/original-pan-028-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d7796fcf5c0c89b89007f8284ec6f9d/original-pan-0261-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/454bbf84aa52e942b21b3d22ffe4939b/original-pan-027-768x1024.jpg2024-09-25 15:42:15 UTC6152530PressesPressroom Equipmentused5736-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152530-used-5736-580-used-36-diameter-pan-type-horizontal-payoff-reelhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37093286dbcd41691c51c9b784bdff2c/original-5736.jpg2024-09-25 15:42:14 UTC6152531PressesPressroom Equipmentused0754-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152531-used-0754-used-power-takeup110 Volthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc4f47386f7326c4fdc49eac5a5c0eca/original-0754.jpg2024-09-25 15:42:14 UTC6152532Capacity: in soft steel: 1/2" Equipped With: Adjustable stroke Cast Iron Base Foot operated Pedal Pneumatic cylinder - Palm control and pressure regulator About Section: Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . Blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please inquire with your specific needs. Including 5/8”Shank holder...Priced @ $100 each ½” shank Shank holder....Priced @ $100 each 3/8” shank Shank holder....Priced @ $100 each Die dish.....Priced @ $150 each We will pallatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused5903-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152532-used-5903-510-royersford-excelsior-10-famco-metalworking-forming-stamping-2-5-ton-pneumatic-converted-punch-press3"6"2"13/16" diameter22" x 16"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b74751d61b8a029f6a548b557e50860f/original-IMG_8768-e1697120234526.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69a85828c3fc464dee7bf7dc464581ae/original-IMG_8773-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b186ff7de832ef7e694a0087284a320f/original-IMG_8768-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0040bb12dcd4fbcfa9a29f785446891/original-IMG_8769-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28ab7886156bec843656ef424e9777b0/original-IMG_8770-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06e9d68766f187b3f1313e8e18da1730/original-IMG_8771-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64d04e56f972d348fa8bdcf32301b0c1/original-IMG_8772-768x1024.jpg2024-09-25 15:42:18 UTC6152533230V/3PH/60HZ Note:Designed for very thin metals Equipped With: Universal roll positioning adjustment Semi-automatic lubrication All rolls individually driven Magnetic starter and quick disconnect box Additional Photos:PressesPressroom Equipmentused9907-580Pawtucket, RIhttps://www.goldmachinery.com/listings/6152533-used-9907-580-ruesch-3-precision-stock-leveller-flattener-model-5134-s-n-n-18173-1/2" wide x 1-1/4" diameter3".010" to .040"5 over 61000 lbs.37" x 30" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b65263d1f7be304c624f072ee926226/original-9907.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4816c86815534e43752198b22a4744f9/original-9907-1.jpg2024-09-25 15:42:14 UTC6152534Capacity: in soft steel: 1/2" Equipped With: Adjustable stroke Cast Iron Base Foot operated Pedal Qty-2 Hold Downs Jewelry / Part Catch pan About Section: Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . Blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please inquire with your specific needs. Including 5/8”Shank holder...Priced @ $100 each ½” shank Shank holder....Priced @ $100 each 3/8” shank Shank holder....Priced @ $100 each Die dish.....Priced @ $150 each We will pallatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused5904-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152534-used-5904-510-royersford-excelsior-10-famco-metalworking-forming-stamping-punch-press-foot-operated-2-5-ton-kick-press3"6"2"13/16" diameter22" x 16"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/98d7122fa6e5e8655724a2abb868a122/original-IMG_8755-e1697119929948.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fed4cad837e870fdef6bbdb34b6b6c7c/original-IMG_8760-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40cf4a619d59bfb4b9f110ca6801d3ef/original-IMG_8755-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c956b2234ffa6b630f3e8439ba7906e/original-IMG_8757-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6643f910fcd7b8d919470fead4d41e07/original-IMG_8758-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92e2add8739a2dd03f2d1f649fcec5b6/original-IMG_8759-768x1024.jpg2024-09-25 15:42:18 UTC6152535Capacity: in soft steel: 1/2" Equipped With: Adjustable stroke Cast Iron Base Foot operated Pedal About Section: Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . Blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please inquire with your specific needs. Including 5/8”Shank holder...Priced @ $100 each ½” shank Shank holder....Priced @ $100 each 3/8” shank Shank holder....Priced @ $100 each Die dish.....Priced @ $150 each We will pallatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused5902-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152535-used-5902-510-royersford-excelsior-10-famco-metalworking-forming-stamping-punch-press-foot-operated-2-5-ton-kick-press3"6"2"13/16" diameter22" x 16"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c14f39f195ff93189f4ca25a249851b9/original-IMG_8741-e1697120421142.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3660fbcee33e9a2b2627fba652ebb2dc/original-IMG_8743-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/955d39400d82e95e6baec299d4ccaee3/original-IMG_8737-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8412d26da917a84c53ffc7f5fd4c9d6/original-IMG_8738-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f64ec693f70f534910d97cf34776095/original-IMG_8739-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/599e813682fb0ea0dd268c94a5d50956/original-IMG_8740-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50de41cbb1d696c3500cce88bc23b0a7/original-IMG_8741-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87e8de2af51dc0d5ebab15e4e1279f58/original-IMG_8742-768x1024.jpg2024-09-25 15:42:18 UTC61525360Round pin design Equipped With: Comes with Hold Downs 5/8” Shank holder ½” shank Shank holder 3/8” shank Shank holder Die dish PricedPressesFoot & Arbor Pressesused2590-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152536-used-ruesch-7-ton-heavy-duty-foot-press-model-77 ton5-7/8"3-1/2"1"1"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3af973cf12ecbf37dda963cd4cfe58c7/original-0392-e1522156487919.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f772b494a1af09c74188eeac8e95c48/original-042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce4458c15d1a3a46e0fb8ee13d65571f/original-0393-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f7a79500363013b56c04bb686529667/original-0402-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdec72c9776f6da75dbc39d1be5593fe/original-0411-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46f61c1901148362b595c15389d0fe37/original-IMG-4967-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1feed3d318bbd222fa235823dad89e8c/original-IMG-4968-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cef8505d73ad89004083d6874a5d8a00/original-IMG-4969-1024x768.jpg2024-11-12 01:07:15 UTC6152537Leverage with 24" pilot wheel: 45:1 Equipped With: Fixed Table Pilot wheelPressesFoot & Arbor Pressesused7311-520Pawtucket, RIhttps://www.goldmachinery.com/listings/6152537-used-7311-520-greenerd-floor-model-hand-operated-arbor-press-model-special3 ton with pilot wheel8"8"21"3-1/4" x 3-1/2"48" x 29" x 79" high1100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/440e4da5260f5229ec19c548bb236700/original-greenerd-013-e1384635966763.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/801689689a105152c38d572c62029aa4/original-greenerd-0131.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80d3bdcfbefde08109266a2137021192/original-greenerd-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84d22f185f5739ab16a0ea1224154893/original-greenerd-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02fdd846fffcf911626a9fe275331119/original-greenerd-016.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e6425c869571602e583a5a7a7671a1d/original-greenerd-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8de2ed3d5cfd6929c2cae15f1967b68d/original-greenerd-018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13f41a04a3f2900b1bc14097981057b9/original-greenerd-019.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8362dedb534eb72963102ed6b4e6e65a/original-greenerd-020.jpg2024-09-25 15:42:22 UTC6152538Round pin design Equipped With: Comes with Hold Downs / Shank Shank holder & Die dishPressesFoot & Arbor Pressesused2595-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152538-used-2595-510-ruesch-type-7-ton-heavy-duty-foot-stamping-kick-press-model-77 ton5-7/8"3-1/2"1"1"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/421e63d582049e8e7de0d8abb9e54b2d/original-IMG-4975-e1534349443718.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/255c87955f02cc13a18e6052c360a3e8/original-IMG-4975-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7208b6d35af02daf104e93a7fa8a3d1/original-IMG-4969-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d395bb0a9a31911151f822ec9f2b3e06/original-IMG-4972-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f592e2450989018e460b3fb70ec3f0a5/original-IMG-4973-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb31cde5eb03e8e503c839b8687e53a1/original-IMG-4974-768x1024.jpg2024-09-25 15:42:17 UTC6152539Capacity: in soft steel: 1/2" Equipped With: Adjustable stroke Cast Iron Base Foot operated Pedal Qty-2 Hold Downs Jewelry / Part Catch pan About Section: Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . Blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please inquire with your specific needs. Including 5/8”Shank holder...Priced @ $100 each ½” shank Shank holder....Priced @ $100 each 3/8” shank Shank holder....Priced @ $100 each Die dish.....Priced @ $150 each We will palatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused5906-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152539-used-5906-510-royersford-excelsior-10-famco-metalworking-forming-stamping-punch-press-foot-operated-2-5-ton-kick-press3"6"2"13/16" diameter22" x 16"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d203991f52ac5ee2621966a234a3472/original-IMG_8747-e1697119156767.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a251876042a1ee216a961273528361ba/original-IMG_8753-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79cb8d6f704b148846a329fc3ad40cca/original-IMG_8753-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6cb089d88460b211d820e76ba88eaaaa/original-IMG_8754-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ef21127a02a4d8d457378d1a3060ced/original-IMG_8747-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3eb508ce74401c5f74b708920cae1823/original-IMG_8748-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0067a4f489a2eb42e46843c90e27902/original-IMG_8749-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb92df5f06c95a98d5c58f21b32baa43/original-IMG_8750-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8743ad2073e07b699a4d7f240a146806/original-IMG_8751-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b06aec66f403b33af2efce6b9fbfb7dd/original-IMG_8752-768x1024.jpg2024-09-25 15:42:19 UTC6152540Capacity: in soft steel: 1/2" Equipped With: Adjustable stroke Cast Iron Base Foot operated Pedal Qty-2 Hold Downs Jewelry / Part Catch pan About Section: Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . Blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please inquire with your specific needs. Including 5/8”Shank holder...Priced @ $100 each ½” shank Shank holder....Priced @ $100 each 3/8” shank Shank holder....Priced @ $100 each Die dish.....Priced @ $150 each We will pallatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused5905-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152540-used-5905-510-royersford-excelsior-10-famco-metalworking-forming-stamping-punch-press-foot-operated-2-5-ton-kick-press3"6"2"13/16" diameter22" x 16"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b652bab6ab0f51decd355b47becfd81/original-IMG_8760-e1697119752848.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1e780b99f0e0b5d2008c1416659afd9/original-IMG_8766-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7340cd70ce31f40cfe6b3c2bb739382/original-IMG_8767-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c982aa4a6ab156082d54893d71e08106/original-IMG_8760-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5143d31d92a540cd5bc847be69143a73/original-IMG_8761-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bded7b9f566d173cd7405499ce52dc7f/original-IMG_8762-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0827eecd02f85fe4f5c059e232919701/original-IMG_8763-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a87dccbee2bd4890a208021035df2b5/original-IMG_8764-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c5024cf1152c81b3aa639211e9f85f3e/original-IMG_8765-768x1024.jpg2024-09-25 15:42:19 UTC6152541Round pin design Equipped With: Comes with Hold Downs Optional Available at Additional Cost: 5/8”Shank holder Priced @ $Please inquire ½” shank Shank holder Priced @ $Please inquire 3/8” shank Shank holder Priced @ $Please inquire Die dish Priced @ $Please inquirePressesFoot & Arbor Pressesused2591-510Pawtucket, RIhttps://www.goldmachinery.com/listings/6152541-used-2591-510-ruesch-type-7-ton-heavy-duty-foot-press-model-77 ton5-7/8"3-1/2"1"1"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8b7a61445407c589637b8032b784370/original-0352-e1522156352955.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/820b3f799a6e99b168c943bbf320294f/original-041-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bfc0dc5ba60ed42d5bf561db77e9327/original-0353-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/24afb2ccbe51e6b0e4568743217d8448/original-0361-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/896cfeb364aea5e2056771899830122b/original-0381-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e48506b9db647c82165e944119eabeef/original-0391-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4dbd2fab7a96e9ed5d86688a88a955b/original-0401-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cafd5da0d4939134af860f6b604a6845/original-IMG-4965-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d53879416969ff0a459f3e7791a21445/original-IMG-4966-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/697b04b66298f0d758bf82ad39eb99f4/original-IMG-4967-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26e22872c50954313710dbc282cd2175/original-IMG-4968-1024x768.jpg2024-09-25 15:42:22 UTC615254210120.0Construction standards in accordance to "CE" with respective documentation. Brushmotor 3 KW (2800 r.p.m.), self-braking with pedal stop. Aspirator motor 3 KW (2800 r.p.m.). Total installed horse power 6 KW. Dimentions: Length 1880 mm Width 1150 mm Height 2100 mm Approx. Weight 500 kg Equipped With: Power supply 380 V. 50HZ. Three-phase. Compressed air 4 ATM. Machine for brushing and grinding precious objects. The machine has two separate aspiration inlets, this allows to work simultaneously two different materials with no mixing the brushed-off dusts. Filtering area 6,5 sq. meters with anti-static system. A silencer and absolute filter is mounted on the aspirator’s outlet for the recirculation of the aspirated air in the room. Double push-button start and automatic system of hose cleaning. Availability: Ex-Factory, ItalyPolishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip WringersnewTVN-2-pdaPawtucket, RIhttps://www.goldmachinery.com/listings/6152542-new-tvn-mod-2-pd-cleaner-with-two-separate-positions-auto-cleanhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afc4ee56ceca5d07be4177986286d53d/original-2-pda.jpg2024-09-25 15:42:12 UTC6152543MINSTER B1-16 Tonnage 16 tons S/N B1-16-14772 Press type B1-16 Voltage 208 3PH 60 Cycle Stroke 1 inch Length of Down Stroke Adjustment 8.25" Shut Height 8.5 inches SPM 500 Weight 1500 pounds Equipped With: Fixed Base Lubrication system Bolster Plate Air Clutch Dual Palm Button Operation Control panel timer Electro cam Rotary cam limitPressesHydraulic & Air Pressesused5912-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152543-used-5912-220-minster-press-16-ton-type-b1-16-1-stroke-obi-air-clutch-air-brake-stamping-press10" F-B x 17" R-L8"5-1/2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d83a8624c7d557e98ef0bec314ffea1/original-IMG_8649-e1695736581288.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe1e1999c2ce8a9ba5569a0fb7ac021e/original-IMG_8659-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/850a4b1353450140120034ff63120c20/original-IMG_8662-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/355b9f70969bc9a99ba2ff3431e80330/original-IMG_8663-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4acd00e33895c24c074abb0efb855b98/original-IMG_8664-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/767403ee28b14a4a1f8c10e85729d5e5/original-IMG_8665-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95d376da72a22d752321c89f3705e50b/original-IMG_8667-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/656ca6a487fd8b36ce2ace9455580b16/original-IMG_8673-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5cb2317c35bbaa6a4a2c89ff370e65d/original-IMG_8649-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ee17fd623c6f58dcdee2851f3c87e49/original-IMG_8652-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2a45aea33702c3c2be3159e7742fa76/original-IMG_8654-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1017b52690d7fd80d40e05595670b6b0/original-IMG_8655-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5bf78715382f821fc94bd396dd4022b/original-IMG_8656-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e564b53ecb5ccc13ac6811c1587db18a/original-IMG_8658-768x1024.jpg2024-09-25 15:42:24 UTC6152544MINSTER B1-16 Tonnage 16 tons Voltage 220/440 3PH 60 Cycle Stroke 1.50 inches Shut Height 8.5 inches SPM 100-200 Weight 1500 pounds Equipped With: Control panel Dual Palm Button Operation Lubration system Fixed Base Air-Clutch / Air-BreakPressesHydraulic & Air Pressesused5913-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152544-used-5913-220-minster-model-b1-16-16-ton-punch-press-stamping-press-air-clutch-brake-roll-feed1-3/4"10" F-B x 17" R-L8"5-1/2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5a00c06bd79fe35a0d366287de883a5/original-IMG_8565-e1695736321655.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45d7d826a5a2e23cc31bd095cb631e18/original-IMG_8569-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/169bc134ef3730a87168695d87200275/original-IMG_8570-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed890bb7dcd52aa8d42ebd4495f0ab5a/original-IMG_8561-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5427fee8bd66dd347df9107d8295e628/original-IMG_8562-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5e04b6a72114ae20f9704ff4e0d7f2a/original-IMG_8563-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c2776db7365a010f7845d6c05705a5f/original-IMG_8564-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6605c765f7100ee5c40aef17652e127/original-IMG_8565-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3642a3e77c8df6ae32452ae5e5b2cef/original-IMG_8566-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d9b0f0a371e9312571ecadbb8c3a59b/original-IMG_8567-768x1024.jpg2024-09-25 15:42:22 UTC6152545LocatelliT500ML0Locatelli Meccanica Series B Model T500ML S/N 3909 Equipped With: - Dual palm buttons - Foot Pedal - Safety Light curtains - E-Stop - Digital Counter - Manual The machine can be endowed with an Immaterial Barrier, with Bimanual control or with the following options Upper Hydraulic Extractor tons 2,0 (50B) Lower Hydraulic Extractor with stroke end mechanic stop movingtons 1 + 5 ( 50 -65B ). This press belonging to B series, is an hydraulic press conceived as monobloc with upper moving plane.This moving plain works together with the power piston and is guided by two columns. These columns are at the same time two plunger pistons with a small diameter and they have a twofold function : to guide the moving plain and to perform fast approach of this planeto the working phase. Because of these pistons are in oil bath, we have the advantage to avoid the slides lubrication and an excellent precision. The main cylinder is provided with a filling valve that,during the lowering,is opened by depression allowing the cylinder filling. The piston is quickly moved by two leading guides creating so the above mentioned depression. The cylinder is of simple effect kind: The up stroke is fast, with the presence of two auxiliary approaching cylinders:in this phase the filling of the valve is hydraulically opened, the oil flows again toward the upper tank from which it was sucked by Depression.PressesHydraulic & Air Pressesused39095952-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152545-used-lms-locatelli-meccanica-500-ton-series-b-t500ml-hydraulic-coining-press-for-coins-medals-medallions-more500 Ton520 Bar150mm300mm400mm x 480mm2,800 kg12.5 HP270mm/sec2mm /sec270mm /sec58" x 58" X 96"7276 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c327ba66f8427d338ba21edb2151d8b0/original-IMG_7113-e1678286525107.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b768c00f034b0492b6abe997fa4877ad/original-IMG_7122-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a085c7555c88b49febb58d8330442860/original-IMG_7123-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/815993aa94d341f9f8f3b43d509f5c71/original-IMG_7124-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7f52659f5f15da4465685482d4e42d6/original-IMG_7129-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c949da7e09533e5271844398e84b43d/original-IMG_7131-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d73bbb02b11992403bb027b14b64cff9/original-IMG_7132-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b629a5fded7a86a4cb6e6a8a22367fb/original-IMG_7113-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66c2c7881ddb9e91406880f2ec4ed029/original-IMG_7115-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29e6ecb13fa82883b6b22f87c7ec46c4/original-IMG_7116-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df672ef842bff3882f6686b319cc726e/original-IMG_7117-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02bd130ad026923fa512a9f212bcfb1e/original-IMG_7119-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/019462447d1ad3eae9a6d080434d13aa/original-IMG_7120-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54901933d588ad6ca9d9c7ccabc77302/original-IMG_7121-768x1024.jpg2024-11-06 14:24:39 UTC6152546Scroll Down To See Video! 110V 1PH 60 Cycle Upper Platen size 6" Diameter Lower Platen size 9 1/4" Diameter Daylight between platens 6" Max stroke 3 3/4" Overall size 36" x 36" x 75"H Estimated weight 1425 Lbs Equipped With: Hand operated lever hydraulic pump for ram up/set up Pressure Gage Handwheel quick pressure release valve.PressesHydraulic & Air Pressesused5960-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152546-used-5960-220-chase-burroughs-co-hydraulic-up-acting-press-enerpac-hush-pup-hydraulic-tank-pumphttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d28983464c5dbb68464cc9787ae8c3ac/original-IMG_6287-2-e1670507266874.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e92cd76f13a673f11ca714fb9b5a0466/original-IMG_6294-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d3a6605404af100deec05c4524f3409/original-IMG_6287-2-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61e043f1a2e906bb49300c41d2d69e5a/original-IMG_6288-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b2b9a1e7b14db4d9650ae1dcf9373ab9/original-IMG_6289-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1071ff7de06d90e32d4d692157f20486/original-IMG_6292-2-768x1024.jpg2024-09-25 15:42:22 UTC6152547With 4-position dial table 1 Ton Additional Photos:PressesFoot & Arbor Pressesused7197-520Pawtucket, RIhttps://www.goldmachinery.com/listings/6152547-used-7197-520-small-floor-model-foot-press19" x 22" x 46" high65 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6ac24014f10ff544dac1d03e5fb39d6/original-7197.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/134dc7952660ae7d7569b5e12bc10d7f/original-7197-1.jpg2024-09-25 15:42:18 UTC6152548LocatelliT300ML0Locatelli Meccanica Series B Model T300ML S/N 3628 - Pressing Strength Ton 300 - Moving Plane Stroke mm. 150 - Opening Between Planes mm 250 - Table Depth mm, 350 - Motor Power kw.9,5 Equipped With: - Pneumatic safety door - Dual palm buttons - Foot pedal - Safety Light curtains - E-Stop - Digital Counter The machine can be endowed with an Immaterial Barrier, with Bimanual control or with the following options Upper Hydraulic Extractor tons 2,0 (50B) Lower Hydraulic Extractor with stroke end mechanic stop movingtons 1 + 5 ( 50 -65B ). This press belonging to B series, is an hydraulic press conceived as monobloc with upper moving plane.This moving plain works together with the power piston and is guided by two columns. These columns are at the same time two plunger pistons with a small diameter and they have a twofold function : to guide the moving plain and to perform fast approach of this planeto the working phase. Because of these pistons are in oil bath, we have the advantage to avoid the slides lubrication and an excellent precision. The main cylinder is provided with a filling valve that,during the lowering,is opened by depression allowing the cylinder filling. The piston is quickly moved by two leading guides creating so the above mentioned depression. The cylinder is of simple effect kind: The up stroke is fast, with the presence of two auxiliary approaching cylinders:in this phase the filling of the valve is hydraulically opened, the oil flows again toward the upper tank from which it was sucked by Depression.PressesHydraulic & Air Pressesused36285953-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152548-used-lms-locatelli-meccanica-300-ton-series-b-t300ml-hydraulic-coining-press-for-coins-medals-medallions-moreBar 515kg 350mm. " 270mm. " 3mm. " 27041" x 48" x 81"4585 Lbs5298 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06333661b31ec8779dabf251d0c2ab0c/original-IMG_6988-e1677268462375.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af5f7e8db1af1bafe1f9c00e9f907214/original-IMG_7002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bfe61b340ac7b1800a7c30de07978a5/original-IMG_6986-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3810ae97e83b5e3484bfa11ecf8c2b8f/original-IMG_6987-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba65b31b33476d4ed987ad75776a333d/original-IMG_6988-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa3b2b7e07ab967da7fb6fa11cf94275/original-IMG_6989-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/503d55c76b1f674a31dc6d169fa17fda/original-IMG_6990-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa79334d24ec4a5961cbe994ea419cf8/original-IMG_6991-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f922672bb0e7bce1e226d27741a969c7/original-IMG_6992-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84c86e825fa8203bc0d2bf65186eef65/original-IMG_6993-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d1d32f1fd4c73b5766cbe5fbea1226d/original-IMG_6994-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a290e978a00e49ede1ee99efb2aeace9/original-IMG_6995-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3c5b0be9a2908d5f6d57647b16187f7/original-IMG_6996-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd191755a2756ba9c75acf5c78ff6e0d/original-IMG_6997-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e27226baf9d23dd42402e2525bcae0ef/original-IMG_6998-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e714dc1cc7d7009dcb3a6f5d19f65fe1/original-IMG_6999-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fec4259159a35aa594abae5c5d0629e1/original-IMG_7001-1024x768.jpg2026-03-05 21:13:45 UTC6152549Operates on 50 - 125 psi Workplate 7" L /R / 6 1/2" F/B. Pneumatically operated Equipped With: Foot Pedal Applications: Plastic and metal forming Die cutting, Assembly work Broaching, Blanking, Swaging Piercing, Riveting and many morePressesHydraulic & Air Pressesused5992-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152549-used-5992-220-joraco-3-ton-quick-action-air-pneumatic-press-with-foot-pedal3 ton2-1/2"5"1-1/2" diameter4-3/4"2-7/8" diameterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50cbe8344f60814a22d7c24fffec8d56/original-IMG_5663-e1657892722625.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/221bd2cd55d4a7fb148c4356f976cd57/original-IMG_5664-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b084fd417ef1dea64e7a3114735cea6/original-IMG_5665-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1784ff5b856a6dfbcae47d9817c0514a/original-IMG_5666-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2daad21eaa89e6faea8d19f4bd6b7599/original-IMG_5667-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d48a6fb85384c7b8f0c063c5d41dbdfb/original-IMG_5663-1-768x1024.jpg2024-09-25 15:42:22 UTC6152550Denison Model #DF6CO4C0OA59A3 Voltage 220V 3PH 60cycle Manually controlled Max Stroke 6" Piston size 3 1/4" Ram size 2" Motor pump assembly GPM 7 Type Vane PSI 1450 HP 5 Daylight 9" / From work holder to ram 5" Throat 5-1/2" Equipped With: Open Throat C frame Design Dual Lever controls Heavy Duty Steel Stand Work Light Adjustable stroke Pressure gauge Work piece holder With 5c colletPressesHydraulic & Air Pressesused5304-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152550-used-5304-220-denison-6-ton-multipress-c-frame-hydraulic-press-model-df6LR 16 1/2" x FB 11" x 37" height21" x 32" x 62"2675 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f35c005c2f2e45042746835d1efb8c3/original-IMG_4740-e1650046220239.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75c2287d9b3bada2f3752bed53c53cd8/original-IMG_4740-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b256779e84b41374a1d58cde2fc20e5/original-IMG_4743-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f29a05b1e4548264d16e7a0ae679a3e/original-IMG_4744-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c3fcab113bc3ecf4a8ab287a39488fd/original-IMG_4745-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f0a1e82eb5cfdadf4183007693be053/original-IMG_4746-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66e2020bd40550e072300d147beae1a7/original-IMG_4747-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/361f08566e3d77c6072b3cc4652f34df/original-IMG_4748-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6842403ba3fca02be4a5ed3e5d36cf8d/original-IMG_4749-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d6c37b4309a6deb8eeb9c622633e792/original-IMG_4750-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4851daf34ae8fd7b0062fc98e26ad554/original-IMG_4752-768x1024.jpg2024-09-25 15:42:27 UTC6152551S/N 20195 Composition: Frame - Structural C-Channel & Aluminum Ram, Base, Retaining Pin, Ram Guard, Surround Shield - Aluminum Crush disposal costs by compacting up to 6 drums of waste into one. Crushes waste with 12,000 lb. of force Ideal for minimizing waste such as absorbents, rags, plastic, paper and cardboard Durable 5" channel profile frame prevents flexing and failure over time Tilt-back frame makes loading easy No need to move or slide heavy drum for access Reinforced base plate keeps drum from bowing under pressure View port lets you see inside working compactor without opening lid Safety interlock shuts off compactor if safety cover is opened during operation Not recommended for wood, metal or other hard materials Spark-resistant aluminum construction is ideal for flammables Air-driven hydraulic design uses 80-120 PSI @ 10 SCFM Filter removes water from airline; pre-installed regulator, lubricator and airline filter extend life of hydraulic pumpPressesHydraulic & Air Pressesused2849-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152551-used-2849-220-pig-press-drm607-spark-resistant-waste-compactor-w-structural-c-channel-frame-aluminum-ramSpark ResistantBlack/Silver31.5" W x 38" L x 67.13" HFlammable Liquids12,000 lbs. Crushing ForceAirYesWaste Pump Not Included467 lbs.80-120 PSIhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8071bcda2e299a1fb570868968d43429/original-054-1-e1528385188724.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d8991d27b2343ba9c735a63e55edee1/original-059-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f29f529635990b226667bc078cfb670f/original-062-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5214bdb1082a8a604015c4d81674f7e8/original-064-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8ef0fe5c17ee9bc91a3bed117777561/original-065-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a36ed936458006a9e4071d33a77a9186/original-067-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/279253f22670777b32a5949cab48c088/original-054-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/288ff6b51fb83b7cef9348b09951eb88/original-055-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/799d5a7b2edcdf8701c27365e2c5e923/original-056-1024x768.jpg2024-09-25 15:42:26 UTC6152552Operating pressure 125 PSI Adjustable stroke 1.5" Equipped With: PLC Dual Palm Controls Air regulators Heavy Duty Stand Die set Pneumatic blow off / Tooling -AS SHOWNPressesHydraulic & Air Pressesused2845-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152552-used-2845-220-hugold-pneumatic-3-ton-press-on-stand-w-plc-dual-palm-controls4" diameter x 4" long32" x 34 " x 65" high300 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42e0753a5a5d3f10490124c784ecf9f5/original-IMG-5984-e1527609471634.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78a84f05b37714fd970c330fbd7824f0/original-IMG-5984-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79c72d685ffee706fa893b4201329360/original-IMG-5985-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/662e2ca59343f1b59349eadb75dcbce6/original-IMG-5986-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e197de9ec16cd5e5df8e4e449b102ea/original-IMG-5987-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a79781bd68cfde5142f76a614b88ca9/original-IMG-5989-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d7f74e63fe33f9ef6ee2f0c6248ad4d/original-IMG-5990-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ee2ed63b5daa737afd87e908412096d/original-IMG-5991-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99d62579ebc2e9fdb950a58d9433362a/original-IMG-5982-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e727e73f0b7a955bf764a897e174b736/original-IMG-5983-768x1024.jpg2024-09-25 15:42:27 UTC6152553German manufactured Pneumatically operated Press Model No 25 - 059 - 99 Year of MFG 1999 S-N 3-1188 Max capacity 2800lbs Pneumatic cylinder L 10 3/4" diameter 4.25" Ram diameter 1 1/2" with 3/4" Tool mounting hole Daylight 6 1/2" Throat 3 1/2" Equipped With: Precision ground ram Dual Pneumatic control SMC Air valve and regulator Features Easy adaptation to different tool and part heights because of easy stroke and height adjustment Low noise level (< 75 dBA) Double-acting, wear-resistant cylinders with low air consumption for the return stroke High flexibility due to short changeover time Long service life and high precision due to wear-resistant Teflon coated bushings at top and bottom of cylinder Precision ground ram Precision double ram guidesPressesHydraulic & Air Pressesused6762-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152553-used-6762-230-schmidt-precision-pneumatic-toggle-assembly-press-2-stroke-germany-new-199975LBS16" x 19" x 33"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebffea473f5791e9330b4265ebdf82a4/original-1-4-e1656605418968.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed60a9d4905aeb7c313445e64bde8e83/original-IMG_5542-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e396c6722f4848cb28a589322ace52d0/original-IMG_5543-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fcd9a09a55b448616edf6564d0dd1196/original-IMG_5544-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41f35c331d1360c2d10e213b6e6b27f7/original-IMG_5545-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77fa70e67aa4bc1d3ce1c37dd935ca31/original-IMG_5546-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0afcee02e5ae954bcbad71e051e0638/original-IMG_5547-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/275776996e0c6d949dede4444627d49c/original-IMG_5548-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f6397efa3917c3be769d9b9c800e7f7/original-IMG_5549-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/552949bfdcf51681b226c1427e98f1f5/original-1-5-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/059db5b3b880a6b9f13e8a67a251c465/original-2-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9ccf19476e17bd3dbf039aac39864b3/original-IMG_5538-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e35a61782f3458ce4e3687127727e40b/original-IMG_5539-1024x768.jpg2024-09-25 15:42:25 UTC6152554Voltage 208/220 Volt - 3 phase - 50/60 cycle 310 Strokes per min Ram hole" 1" x 1" Floor space required Est. 30" x 32" x 55" H Equipped With: Transformer Electric foot control Features: Cast iron frame for maximum structural integrity Allow steel crankshaft Mechanical sliding dog clutch Non-repeat clutch mechanism Replaceable bronze main bearings Hand trip lever with safety latch Barrier Guard Flywheel/Belt Guard Drag Brake Adjustable ram guides Adjustable ball socket connectionPressesHydraulic & Air Pressesused3391-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152554-used-3391-220-benchmaster-2-ton-press-model-141-with-transformer-electric-foot-pedal-control3/4"5"5-3/4"1"3-1/4"4-15/16" x 7"10-1/4"1/3 HP200 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d58d57dd9b804d9b8bfdd92e99dc2dd5/original-1-18-e1585674790324.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/053c42087c260db9527916a7d0e72cf5/original-1-19-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ba085dc1dcc463f7ce6966b5f28a519/original-2-9-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cfcbd2fec717a0f5d2b2804df4522261/original-3-9-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b18c59f9cddfe467739c0d1649747519/original-IMG_8353-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3a94b1d14b203913afa7147a2a6ea1e/original-IMG_8361-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7a3a9ba959ff9a8e4bca793aaa53a5a/original-IMG_8362-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d41ec6de68c25a70d7a93be96f4bb8eb/original-IMG_8363-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00b18ecac1e117da8c92f9977e1cec0f/original-IMG_8364-768x1024.jpg2024-09-25 15:42:27 UTC6152555Control Panel New design swinging / height adjustable monitor. Allen-Bradley colour touch screen 10”. USB + Ethernet connection + Teleassistance (wi-fi, 4G, Ethernet) Multiple pressing with timer. This device allows having three pressings with closed die. In this way the material is stretched at different pressures and dwelltimes, and the user reduce or avoid annealing the piece in the furnace with better results in relief. Possibility to change the pressing speed by setting increasing and decreasing pressure ramps (a certain pressure in a certain timing). Hologram function. Lifting function. Die cleaning function. Operative cycle with fine position position control ± 0.01 mm. Operative cycle with fine pressure control ± 1% precision. Setting up of the pressure through display keyboard. Safety working limit of the pressure set up by the user. Hours counter device. Axis reset. Wiring to fit an automatic feeder. Pressing mode - Programs: Manual - Automatic - Continue (with automation). Real position for UDC and BDC. Timer for upper and lower extractors. Programmable “virtual cams” on upward – downward movement of the piston. Counter pieces device (increase, decrease or reset of the pieces). Setting of the pieces to do, with stop of the machine at this reaching. Cycle time for every cycle with chronometer. Oil temperature and settings for water input (option). Signal messages for wrong data entry. Breakdowns research with stop of the machine, alarm messages, checks to restore the machine. Instructions displayed in 4 languages (Italian - English - French - German). Memory of 1000 different programs The Main piston Press Force 300-6000 kN Ram Stroke 0 – 200 mm. Max. service pressure 315 bar. Closing speed 383 mm./ second. Pressing speed 4,6 mm./ second. Opening speed 290 mm./ second. Opening power of the piston 340 kN. Position of the UDC adjustable by Digital Control Display. Position of the brake of the piston adjustable by Digital Control Display Position of the BDC adjustable by Digital Control Display. Safety Safety front photocells level 4 complete with pedal control. Pneumatic safety shield. double charging – wrong positioning. Declaration “CE” in accordance with the European Machine Regulation 2006/42/EG Immediate stop of the piston when it joins the bottom set position. This allows the best safety for the tools (difference ± 0,01 mm. height stop). Safety of the high and low extra-strokes. Check of the pressure with two defined heights, lower and upper, to the set working pressure. Safety valve with monitor to support the mobile plane, fixed directly on the cylinder block. This valve prevents a possible fall of the piston. LED lighting of the working area. Anti-vibrations feet. Lower ejector (Option) The ejector cylinder is fixed on a slide, which allows a fast dismantling without removing any pipe or electric wire. Adjustable extraction speed. Automatic or manual selection of the ejector. Hydraulic cushion included (it is possible to work with contra-pressure). Timer of the ejection. Adjustable force kN 0 - 80 Adjustable stroke mm 0 - 40 mm. (mechanical stop) Surface (Ø) mm 10,5 Upper ejector (Option) Automatic or manual selection of the ejector. Timer of the ejection. Is possible the ejection during the backward movement of the main piston. Adjustable force kN 0 - 100 Adjustable stroke mm 10 mm Surface (Ø) mm 10,5 6Water heat exchanger It allows cooling the hydraulic oil with a bundle of copper pipes cooled by the water. Located outside the oil tank and easy to check. 7Temperature device (Option) Allows a control of the oil temperature. An electronic device displays the temperature and it controls a valve that adjusts the water flow according to the temperature of the hydraulic oil. This allows sparing the consumption of water (optional). Safety limit temperature with 2 levels: first level allow the input of water to cool the oil. Second level warning with a red light blinking. Both levels can be set by the user. Building characteristics Strong, rigid, compact press frame for down stroking action with centric loading. 4 columns structure with lower table made in forged steel. The cylinder is got from the same upper part of the press frame, forged in one piece in order to have the steel’s fibres placed in a normal way during the efforts of the working phases The guidance of the press ram is effected by 7 points flat guidance at the upper pressure plate: by the four columns of the press, the press piston and the two side quick-action pistons. T h e press piston and the two side quick-action pistons are grinded and chromium-plated hard surface, super finished. Tool space accessibility through front to four sides. Compact design on common baseplate for press frame, switch cabinet and hydraulic aggregate with sound absorbing housing. The main oil tank is designed onto the press bottom, in order to have great stability and vibrations free and very low maintenance. Hydraulic pumps and filters located outside the oil tank, for an easy checking. Special “low noise” Made in Germany pumps. Air Cooler for hydraulic components. Designed for manual and optionally automatic feeding. Fixture safety ram stroke limitation for working in tool space. Labels, instruction manual in your Country language. EX-Factory, Italy Options: Lower hydraulic ejector 0÷11 tons, complete with foot-pedal,PressesHydraulic & Air PressesnewT.600 4CPawtucket, RIhttps://www.goldmachinery.com/listings/6152555-new-lms-goldpro-cnc-high-speed-600-ton-hydraulic-coining-blanking-stamping-pressPressure control in the bottom position to avoidmm. 675mm. 550 (max.)mm. 550 x 800Kg. 11.000kW 30Kg. 480mm. 1550 x 1730 x 3030 h.POREuro POREuro POREuro POREuro POREuro PORPORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:23 UTC6152556500 Tons European safety standards CE Work pressure up to 500 bar Bolster plate stroke from 0 up to 100 mm Upwards movement of the bolster plate. Approaching speed 60 mm/sec Return speed 95 mm/sec Pressing speed 1.0 mm/sec Installed power 5.5 kW Feeding voltage 400 v 50 Hz 3-ph threephase overall dimensions mm. 1275 x 700 x 1670 V220 Hz 60 threephase Equipped With: PRICED FOR €POR EURO (PACKING & CRATING ADDITIONAL) EX-FACTORY ITALYPressesHydraulic & Air PressesnewCombiPress 500 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152556-new-mdm-goldpro-combipress-500-ton-hydraulic-press-for-coining-blanking-deep-drawingHYDRAULIC DIE-HOLDER , Ø MAX 80 mm 5.600 Euroshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e0407905f1f0249e66c02305f5ad09d/original-mdm_300_ton-e1363007172720.png2024-09-25 15:42:22 UTC6152557PRICING EX-FACTORY, ITALY MODEL COMBI 210 Press: PRICED FOR €34.900,00 EURO PRICED Complete with hydraulic ejection die holder maxim medal (ø mm. 40)… €44.900,00 EURO PACKING & CRATING … 800,00 EURO MODEL MP210: PRICED FOR €33.900,00 EURO PACKING & CRATING … 800,00 EUROPressesHydraulic & Air PressesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152557-new-goldpro-mdm-210-ton-presses-coining-stamping-forgingEJECTION, MAX DIAMETER 50 mm… € 4.400,00 EUROhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/abfca29681511d2e6fd566f926a9d69d/original-mdm_1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b6de4b5677595219bfffe155d4fe2fd/original-mdm_2.png2024-09-25 15:42:22 UTC6152558This presses in this series have a monolithic body made of forged, treated steel, with incorporated cylinder on a bushing guide. They are assembled in a sturdy structural steel frame with incorporated hydraulic power unit and control and safety devices. The bolster plate ascends, and the hydraulic control system is composed of a high pressure pump, two double-acting hydraulic cylinders (for approach and return), and a hydraulic cylinder for reaching the work thrust. This optimizes the work cycle without wasting energy and ensures a fast opening and closing speed to limit idle time. The slow impact speed that starts at a preset height helps make dies last longer. Oil is continuously filtered, and there is a clogged filter warning light. The large oil tank ensures operation of the press without overheating. The work cycle is controlled through the digital display, with settings for the work cycle (start, slowdown, finish), even for nonstop cycles, as well as pressure settings for the selected cycle. The machine is provided with the appropriate safety systems (Level 4 photocell or mobile safety barriers) in conformity with international regulations and the laws in force. Possible operation methods: ascending and descending “jog mode” for die positioning; automatic single stroke cycle; automatic continuous stroke cycle (combined with automatic feed system); automatic continuous stroke cycle with stroke options (1,2,3,4 hits) The work process can be controlled by: pressure, through the manostat (for pressing) height, through the electronic card (for blanking) Optional accessories: Die holder with hydraulic ejector; hydraulic ejector incorporated in the bolster plate; adjustable blank holder; automatic coining system for ingots/coins/ medals; automatic conveyor or bar feeder (push or pull); motorized conveyor holder reels and scrap collector. Available Ex-Factory, Italy PRICING UPON REQUESTPressesHydraulic & Air PressesnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152558-new-goldpro-mdm-monobloc-presses-with-scending-bolster-plate-combi-200-2000-tonhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eebc73ef1c359bf263637f850cdbeb4d/original-mdm1.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/903b77eeb8b0ca3d3901f72f436c7d95/original-mdm2.png2024-09-25 15:42:22 UTC6152559Operates on 50 - 125 PSI Applications: Plastic and metal forming Die cutting, Assembly work, Broaching, Blanking, Swaging, Piercing, Riveting and many more Link To Manufacturer's Website: http://joraco.com/products/presses/toggle-airePressesHydraulic & Air Pressesused2522-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152559-used-2522-220-joraco-5-ton-toggle-aire-pneumatic-air-press-model-15305 ton2-1/2"5"1-1/2" diameter4-3/4"2-7/8" diameterup to 240 SPMhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31396856752b37611fd09c8806553806/original-2522-1-MAIN-e1496925668761.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25b0acd0329e66333503b797c7cef561/original-2522-5-566x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02984cb8104674aad0c9302544963b61/original-2522-1-MAIN1-691x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18710137228dc7cec4f08d6570cdc79b/original-2522-2-1024x940.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca1f76ee3c8d743f51f466845ab6b4b3/original-2522-3-956x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/212c7b4e956a27d84a78489cc92b7aed/original-2522-4-890x1024.jpg2024-09-25 15:42:26 UTC6152561Equipped With: Die set 5/16" punching tool Parts counter Single actuator controlPressesHydraulic & Air Pressesused2159-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152561-used-2159-220-hugold-bench-model-pneumatic-air-press-model-u-aks200 PSIadjustable to 2"2-3/4" diameter x 3" long1-1/2"1-1/2"5"18" x 18" x 22" high70 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9dbd06ec4b3aa5ce5f646b49a1d6b78/original-IMG_0778-e1459775820322.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08cff3e1d5e1e6e6d263bcf46198cbdb/original-IMG_0784.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d6d2b049421d2782ad250f49190f695/original-IMG_07781.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/996faaec01eebb50114717d55d2ec2bd/original-IMG_0779.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85a021aa428975dc6e2f5f8d747834eb/original-IMG_0781.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/803836598935d6a98a3cee91cc93ba06/original-IMG_0782.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20c8e33c1481f59d9203d3c7cb8fc94e/original-IMG_0783.jpg2024-09-25 15:42:28 UTC6152562Equipped With: Single activation lever Air regulators Cast iron pedestal stand Die Shoe / Tooling -AS SHOWNPressesHydraulic & Air Pressesused2245-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152562-used-2245-220-hugold-pneumatic-air-press-on-stand4" diameter x 4" long8"(w) x 3" deep22" x 21" x 65" high200 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdc7e4b634a12d9b6268ffc8e0d512cd/original-0183-e1471352505781.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6e4877c2e9d9c5506cb5c01a0a8e46fe/original-0252-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f2069dae06a07e3c3414dab16c03b10/original-0184-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93a4559d11eeb375822730d7031369c5/original-0193-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8171cce10d8e60cebb88592d9af634d/original-0203-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0aaa41b85ccd4af17a1d92be3d11ac1/original-0212-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6791e69a08625089a26b25dfd3c76118/original-0222-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4da367b518c082d5ebc2f96b1c13aa00/original-0233-768x1024.jpg2024-09-25 15:42:29 UTC6152563Speeds: Production (strokes/min): 30 mm p=100% 16 30 mm p=10% 22 10 mm p=10% 80 750 kg Pricing......€38.805,00 PLUS PACKING/CRATING...€440,00 FOB ITALYPressesHydraulic & Air PressesnewMdM 60 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152563-new-goldpro-mdm-60-ton-combipress-coining-stamping-forging603200 / 1003,5 mm/sec40mm/sec24 mm/sec2,2750mm x 640mm x 1800mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6b7ebab3f02d45c72bd3252342f137b/original-mdm40-e1373306853684.png2024-09-25 15:42:26 UTC6152564400-50 three-phase voltage Speeds: Production (strokes/min): 30 mm p=100% 25 30 mm p=10% 35 10 mm p=10% 85 830 kg PRICED FOR €33.900,00 EURO PACKING & CRATING ... 800,00 EURO EX-FACTORY ITALYPressesHydraulic & Air Pressesnewmdm 210 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152564-new-goldpro-mdm-210-ton-hydraulic-press-coining-stamping-forging2107000 / 602,5 mm/sec90 mm/sec60 mm/sec4,0840mm x 485mm x 1600mmEJECTION, MAX DIAMETER 50 mm... € 4.400,00 EUROhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc1fc1d273647ed3871749b62c5493b9/original-dfdf.png2024-09-25 15:42:26 UTC6152565.PressesHydraulic & Air Pressesused6784-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152565-used-6784-220-10-ton-h-frame-hand-hydraulic-press9-1/2"20" x 20" x 37" high100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6dc32bf45148c92d9e044303668a96e2/original-p-004-e1362775936889.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/173ffdb8b3a24ecbc584c13d3437c9b2/original-p-0041.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/769ed49e41733a86bfcc1bab89590f44/original-p-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a9cd925cad29c26ad759638acc8292e/original-p-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/10ff2bbc03c63171558986f78cd6fbd3/original-p-0011.jpg2024-09-25 15:42:28 UTC6152566115V/1PH/60HZ Equipped With: Beede electrical controller Dual electric activator Air revitalizer system Die set with feed trackPressesHydraulic & Air Pressesused2160-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152566-used-2160-220-black-webster-electric-pneumatic-bobbin-assembly-press-model-bs3500 lbs.1.75"0" - 11.50", spindle to base4"3" diameter x 9" long36" x 24" x 30" high100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f1b6c6166bb1b88d0e890491500995b/original-IMG_0785-1-e1459776779879.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89985f4158b7aaa4a8a6fd5911d5dcda/original-IMG_0791.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06b6fae2b3f79e06966894921b25b2dd/original-IMG_0792-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a47cec767a552b6104d3ed961b069d1/original-IMG_0785-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a80c54c716bd824fce23488d9d1bd4e/original-IMG_0786-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3f488c903f271992853dd4e8020d147/original-IMG_0787.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6c34b320d0b6e33dd68a68188ec48d2/original-IMG_0788-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/172e55a8682a6e373ec24cc5b6a73490/original-IMG_0788.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a7603b54a47d26f31ab0a7b71b4c318/original-IMG_0789.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/549cab88b979d05ced7222926ad9434f/original-IMG_0790.jpg2024-09-25 15:42:30 UTC6152567Speeds: Production (strokes/min): 30 mm p=100% 25 30 mm p=10% 35 10 mm p=10% 85 830 kg PRICED FOR €34.950,00 EURO PRICED Complete with hydraulic ejection die holder maxim medal ø mm. 40... €44.900,00 EURO (PACKING & CRATING ADDITIONAL) EX-FACTORY ITALYPressesHydraulic & Air PressesnewmDm 210 Combi DigitPawtucket, RIhttps://www.goldmachinery.com/listings/6152567-new-goldpro-mdm-210-ton-combipress-digit-coining-stamping-forging2107000 / 602,5 mm/sec90 mm/sec60 mm/sec5,5840mm x 485mm x 1600mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0044db6435e67423bc1b64feed18bca0/original-combipress.png2024-09-25 15:42:26 UTC6152568PressesHydraulic & Air Pressesused7182-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152568-used-7182-220-pneumatic-bench-press4-1/2"5"3" x 4"2-1/2" diameter x 5-1/2"(L)9" x 5" x 21" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8539a4dbad429bb1287dafd002af1661/original-7182.jpg2024-09-25 15:42:27 UTC6152569Speeds: Production (strokes/min): 30 mm p=100% 29 30 mm p=10% 40 10 mm p=10% 120 700 kg Priced for... €29.299,00 PLUS PACKING/CRATING...€440,00 FOB ITALYPressesHydraulic & Air PressesnewMdM 40 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152569-new-goldpro-mdm-40-ton-combipress-coining-stamping-forging403200 / 1005,7 mm/sec67 mm/sec40 mm/sec2,2750mm x 640mm x 1800mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6b7ebab3f02d45c72bd3252342f137b/original-mdm40-e1373306853684.png2024-09-25 15:42:26 UTC61525701961230V/3PH/60HZ Equipped With: Air clutch Air brake 3" Roll feedPressesPower Pressesused1687-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152570-used-1687-230-perkins-22-ton-high-speed-gap-frame-high-speed-flywheel-power-press-model-22-s22 tons1"3 HP8-1/8"200 - 800 SPM12" x 28"52" x 48" x 95" high5000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ad1e685aa8c4c3deb32f452efaefe4ef/original-ind-035-e1410869135770.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a8e7f358bcdb061d1d82fd2d6e5ddd3/original-ind-037-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2b0357e142e0f36401de7595538c20a/original-ind-038-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23cb6f835ada89df067d5c73b1b29941/original-ind-042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdd47136ad7c939355237147d40f69b6/original-ind-043-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f80e8f290452c8637f3e8faa9954095/original-ind-044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a808bd69c2ae3689c351c93b5e91c1bb/original-ind-045-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6a276062fe001f0907796e200ee7191/original-ind-046-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f34c6b924b57c149954933c25440491/original-ind-047-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7eeed3e79b4d4916e85ab6cac10747f/original-ind-0351-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af070820362752d8b859c2e3ceb95f02/original-ind-036-768x1024.jpg2024-09-25 15:42:33 UTC6152571120V/1PH/60HZ Table work area is 27" F~B & 24" L~R Equipped With: 2 RC101 cylindersPressesHydraulic & Air Pressesused8469-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152571-used-8469-220-enerpac-model-dem1321-twin-cylinder-bench-model-hydraulic-press1/2 HP13 cubic inches per minute @ 200 PSI through 10,000 PSI183 cubic inches27" x 24-1/2" x 36" highSteelSingle Acting1.56"Coupler, Dust Cap1"-82-1/4"-141-1/2"2.25"13.75"22.65 cu. in.10, 000 psi5/16"-1810-1/8"23.88"1.50"2.25 sq. in.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c617c8043925ac8d9eac9d6002fd4405/original-IMG_0375-e1699370711171.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4ed28869e2052e249ec2201dd55a3cbe/original-IMG_0382-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/514bf1553aa19ad8c902383eb0636f72/original-IMG_0383-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4597de0fa599a14f6d7f24057ae3bdf7/original-IMG_0374-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0029ffdd6fa70a79c43c032dacc1e369/original-IMG_0375-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8d9b7b2e50c0ba57e2738e1ae248595/original-IMG_0376-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64acf490d547c9360e4a818a36db6acb/original-IMG_0377-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3acee930f0b4c3874262ecf79676fd4/original-IMG_0378-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ef34729905867c19f7e162d0b8f983e/original-IMG_0380-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bbbc3f0aa108a6dc2cc5d6dea2a8f79/original-IMG_0381-768x1024.jpg2024-09-25 15:42:32 UTC6152572PressesHydraulic & Air Pressesused7177-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152572-used-7177-220-pneumatic-air-bench-press4-1/2"5"3" x 4"2-1/2" diameter x 5-1/2"(L)9" x 5" x 21" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e780d731271d2f2f152cddb2c2b7215/original-7177.jpg2024-09-25 15:42:27 UTC61525731977230V/3PH/60HZ Strokes per min 100-300 7" throat Die space 9" Equipped With: Air clutch Air brake Roll feedPressesPower Pressesused1672-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152573-used-1672-230-federal-22-ton-high-speed-obi-single-crank-power-press-model-22t22 tons1-1/2"100 - 300 SPM12" x 20"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe4f43e45243b785ce0475904dc88a0a/original-industrial-022-e1410806894568.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c6920e1025197acf210c9461f72d1d4/original-industrial-030-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13c35631c19469c16c430f6ff12f39bc/original-industrial-033-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f6ca1bd4fa059ce6fdb80ac11d58bee/original-industrial-034-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02ecb82af74b821d29a07aa6f7b73af0/original-industrial-0221-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/89e2c080e8f2275d490a2bdb20dd7c7c/original-industrial-023-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/610ccde0a58aa580db6bceeb13567ba7/original-industrial-025-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/775fe663525d9731ae047bcda42089cc/original-industrial-026-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c710d31ade9b3bb2e2ab2fdca7f8515/original-industrial-027-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cd7e4f83556e7dbcfac01fe27138b5a/original-industrial-029-768x1024.jpg2024-09-25 15:42:33 UTC6152574220-440 / 3PH /60 cycle Equipped With: Air clutch Air brake 6" Peterson roll feed Vari-speed drivePressesPower Pressesused5288-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152574-used-5288-230-bliss-35-ton-obi-single-crank-flywheel-power-press-model-ch-35-w-6-peterson-roll-feed1-1/2"35 tons12-1/4"R-L= 26", F-B= 17"R-L= 13", F=B= 9"2-1/2"12"100 to 300, variable5 HP60" x 60" x 80" high5400 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/890c8cbc356d5e9d96f458176c1020dc/original-IMG_0580-e1701183463651.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11736cfc3cc95affae4e774a863dc3f8/original-IMG_0584-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a0a45de1042ba029dba7bbfbd42cadf/original-IMG_0578-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf179a3dfe7840547713e231f2c1749a/original-IMG_0579-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31dd3ed21964f555322e51a9b533cc82/original-IMG_0580-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba5a1de55f9a6ea1769d78d0c0562e86/original-IMG_0581-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d97c3193c642c33b4aed7953851a4529/original-IMG_0582-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab45da31d7ead8d302d511f4f1981353/original-IMG_0583-768x1024.jpg2024-09-25 15:42:31 UTC6152575230V/3PH/60HZ Equipped With: Air clutch Air brakePressesPower Pressesused1680-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152575-used-1680-230-perkins-15-ton-high-speed-straight-side-gap-frame-flywheel-power-press-model-15-s15 tons2"1-1/2"2-1/4"7-1/4"100 - 400 SPM10" x 20"48" x 46" x 92" high5000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b17bed3b28956ca6ab36b11aaedfd24c/original-industrial-100-e1410805673357.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9be2f5915b125c17dae0a47c3d2723c/original-industrial-105-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3e3e151bb1f023f191d9904cda749a6/original-industrial-1001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60e26ecc18889d3568f6373745209d85/original-industrial-101-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e91f3e7dbe0d48b38de7220e909fc98a/original-industrial-102-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/425939315083384a96e71ec696d29d47/original-industrial-103-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d532d27bc3e9d5ddb79e69657d5ed043/original-industrial-104-768x1024.jpg2024-09-25 15:42:32 UTC615257610CEquipped With: Air Trip Mechanical Clutch Marking Head Mounted To RamPressesPower Pressesused5914-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152576-used-5914-230-perkins-model-10-c-10-ton-obi-punch-press-air-trip-mechanical-clutch473211101 1/2"1 1/2"5 3/4"13 1/2" x 8"7"15060" x 36" x 58"1,500 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce30420dd839e311229bd224cecad3f9/original-IMG_8634-e1695735603568.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d18fb824d84b6e482bd238e89dbcf17b/original-IMG_8648-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c048b436a814d4edc02060c6d53a4aa/original-IMG_8634-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3ff490343a72f5b367730d46a70c8c1/original-IMG_8635-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f93e9092026cb2073c527d6619410fd7/original-IMG_8636-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcf13758714ce1eb61ff3b30a0a99081/original-IMG_8637-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/648f305ee0cc18ff9bf041d0a08a2e02/original-IMG_8638-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46a8a8cc85d235c4b13dbc3e52e5e660/original-IMG_8639-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93c8237daf3122537dbfffed7f199f24/original-IMG_8640-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/450f0bdc00bedcba0b422f8fa242fcba/original-IMG_8641-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd95fe43a7c625f5bdcc7dcf03465b66/original-IMG_8642-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8b8446694fa9c2c33f16aed2649d8bc/original-IMG_8643-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a501505ff3b8b6b0337eb4184187cd6/original-IMG_8645-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b45070ba26a2e6612dee47cd8d87e75/original-IMG_8646-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28ab73841fd104a4265029845189881a/original-IMG_8647-768x1024.jpg2024-09-25 15:42:35 UTC6152577PressesHydraulic & Air Pressesused7179-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152577-used-7179-220-pneumatic-air-bench-press4-1/2"5"3" x 4"2-1/2" diameter x 5-1/2"(L)9" x 5" x 21" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c5e50cb2b353430213b2d6f82c42d1f/original-7179.jpg2024-09-25 15:42:27 UTC6152578Additional Photos:PressesHydraulic & Air Pressesused8513-220Pawtucket, RIhttps://www.goldmachinery.com/listings/6152578-used-8513-220-pneumatic-air-bench-press4-1/2"5"3" x 4"2-1/2" diameter x 5-1/2"(L)9" x 5" x 21" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aca93bc113eb82b6da5d39cbceb0dae9/original-8513.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/525cf606735fedfacc4d3e893e147524/original-8513_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/512afb4ced4014dbd51e7dfade0cc393/original-8513_3.jpg2024-09-25 15:42:27 UTC6152579115V/1PH/60HZ (63" high with stand) Equipped With: Rapidaire #A2 air feed Product die set cast iron standPressesPower Pressesused0609-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152579-used-0609-230-artos-back-flywheel-terminal-cut-off-press-model-ae-427551/3 HP3"5"6" x 3-1/2"30"((w) x 15"(d) x 31"(h)500 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f81c1aab4d5d13564f0b04da8458bd2d/original-010-1-e1450734767910.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dae100aa36774c18117fe8735397d36c/original-0609-001-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2708fa2bc976e7bfb163ff919b604533/original-0609-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/630b722ff341fdaceef52120439e2a57/original-0609-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/074e476c3dfb3a8ece308aa37299ed75/original-0609-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de2ba558bcddfca3180f9f1f69cc8869/original-0609-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/316f6ca6e9ff21add38b41367548223c/original-0609-007-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02a0adc7764209e56a306754835c0678/original-0609-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09c7c25b5522dd3049f567f0c9f3d270/original-0609-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08a64c78ded7bdc20bdfbbd032d7d10a/original-0609-012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82bbfde4e74c3024e31600769e5e1ca2/original-0609-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/644c28f3229ca30637b0db99d0cf4969/original-0609-015-768x1024.jpg2024-09-25 15:42:36 UTC61525801979230-460V/3PH/60HZ Equipped With: Air clutch Air brake Separate control panel Air revitalizer system Full belt guard Variable speed motor Type# AJ4B 1" bolster platePressesPower Pressesused7485-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152580-used-7485-230-v-o-high-speed-production-power-press-straight-side-35-tons5 HP, Variable Speed359"1-1/2"10"3"10-1/2"165 - 500 SPM29" x 16"60" x 62" x 87" high8400 lbsAllispede8751750https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3894ec7a74716679a0562478c5eea601/original-v-009-e1363377702301.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f43ebc50fbdc146e79b940c2d6968867/original-V-082.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28c5eeea22f12e110c9a7bc4b52bd0bf/original-V-081.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85336e22a0d45905414960cb0b579e3a/original-V-067.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ad45efc3f286505fa02aa819693881b/original-V-059.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f85b07aafa3dbc2c8a952bc76be3119e/original-V-048.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/525d38f76c4e589cb47f6191a8c3dd93/original-V-047.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4dfc346dad9e04750c1aaac9780bbd06/original-V-046.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c01b74c0af859a2681140e2fea3c3fd4/original-V-043.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1273ecb734e33177ebab6b283028ad57/original-V-036.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8778d28de56b8743dd3ee9b210ef4be/original-V-033.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb3187363044886b06359e0838e23632/original-V-032.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/797a9785b4d269ba8fb145874c88978c/original-v-0091.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8cb9381e90c922d41978a14319857255/original-v-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e7b68a2ab2b3239ee1a53c249205fd1/original-v-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c9e23aebf49565b0c95be308c380037/original-v-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a9583ad8c99c8b370a4f27d110cd17b/original-v-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b874e4114964db08b32613ba3c4b0d0d/original-v-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eacc77ff71df6dacb2608dc1fda8dc08/original-v-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71a085d23ccaf34a495a768b7bdff443/original-v-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fc8f0ec4091b0125aacea75e81e0de7/original-v-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ec884a2aaba18d93d7fbc87637053c2/original-20130316_133032.jpg2024-09-25 15:42:43 UTC6152581440V/3PH/50HZ Equipped With: Start/Stop controls Fly wheeel guard rear mounted roll feedPressesPower Pressesused7954-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152581-used-7954-230-standard-machinery-co-10-ton-capacity-model-7sd-transfer-press-double-plunger-style4-1/2"6-1/2"11-1/4"1-1/2 & 2-1/24"100https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d219e4dc5ece5458aea56a1940b70423/original-7954.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2500558c648e25acb5afbccc5a5f67e8/original-next-016-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc97dd5bc82c5d39f3df734a66867f67/original-next-017-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79d72062856d01a683e9851eba0fbb53/original-next-018-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7762684e599e2f41ee86716f799ffd2/original-next-019-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a9eac87a19952e085c4f985c789cb34/original-next-020-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4862e402717013d88fb3f82959845597/original-next-021-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d40e57959988bd4525ad126172881e0/original-next-022-768x1024.jpg2024-09-25 15:42:33 UTC6152583115v/1phase/50-60Hz Bodine Electric D-c Motor Speed Control & Gear Box Motor Size Of Press: 11½ H x 8"w x 9" D Equipped With: Bench Size: 36"w x 24" D x 30"h Bench with One Door & Two Shelves Bench Has Butcher Block TopPressesPower Pressesused0553-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152583-used-0553-used-micro-power-presshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/24542f722ad50a3f56598ace6b381c26/original-0553.jpg2024-09-25 15:42:31 UTC6152584NEW GoldPro(R) Large Die Set w/ Hydraulic Ejection for up to 650 ton Press : Includes Set up / Installation – Capable of .1/2 OZ to 10 OZ Priced for… $POR 1 Set Coining Tools for 39 MM And Smaller, 1 Top Die, 1 Bottom Die, 1 Collar with Plain Edge or Reeded Edge Priced for… $POR 1 Set Coining Tool for Above 39MM to 10 Oz, 1 Top, 1 Bottom Die, 1 Collar Priced for… $POR Additional Options: Blanking Tool for 39MM to 10 OZ Priced for… $POR Prestamp Ingot/Bar Up To 10 Oz Priced for… $POR Bridge Attachment & Electronic Mini Conveyor for Dispensing Blanks Priced for… $POR Bridge Attachment for Manually Dispensing Blanks Priced for… $POR Click For Larger Photos Approximate lead time 8/10 Weeks from - 50% Deposit ( required to start ) Please Note shipping to R.I. factory for Set up / Installation is aditional @ T/B/DCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6152584-used-goldpro-large-die-set-w-hydraulic-ejection-tooling-options-for-coins-ingots-and-bar-making-blanking-coininghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53ab4f7511f3da124dcaad85ad39b426/original-WIN_20151201_105028-4-1-e1530208294822.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/836b517d4a8d9b2ef00a068dd7190f9b/original-IMG-6587-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54b997d79fe8d884ad0a09f88d41c063/original-WIN_20150303_131704-5-e1530209285476-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b5ec176394353ccf12dc0ef1897d54d/original-WIN_20151201_104955-1024x576.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f3a0d25e29c10e6615d2420edd29bfd/original-WIN_20150303_131704-5-1-e1530209300212-576x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8516071b9dc48a6898d490ee41e46c72/original-IMG_0503-3-e1530209620753.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e17fb9d8b67c62ec79b431547bfa533c/original-IMG_0508-1.jpg2024-09-25 15:42:34 UTC61525851961Scroll Down To See Video! 230V/3PH/60HZ Inch or Continuous Run Single or Continuous Stroke Equipped With: Air clutch Air brake 3" Roll feed Bijur lubricationPressesPower Pressesused1679-230Pawtucket, RIhttps://www.goldmachinery.com/listings/6152585-used-1679-230-perkins-22-ton-high-speed-gap-frame-flywheel-power-press-model-2222 tons1"3 HP8-1/8"200 - 800 SPM12" x 28"52" x 48" x 95" high5000 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b93406fc32f680f0142f2a1d975821c9/original-industrial-089-e1410805005600.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1387c02179cd5502fd1cf4115456f646/original-industrial-098-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7bbb0c569ec12d6c497fd580488a98ec/original-industrial-0891-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b5f401614353527a8223303420f2fb9/original-industrial-091-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07bd9028173e25ce74765a07ca078a15/original-industrial-094-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ccd91432a0da4c40c02dc13a018b49e/original-industrial-095-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7375644e7b17fd1cf6177c25d9fff79/original-industrial-096-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a0ffe16f1a67fefd1d6cadaa6424311/original-industrial-097-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d7f898d37102be7c75ca7e916044268/original-IMG_7392-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c646d0f5afe34ef85c564c2aae7ca82/original-IMG_7393-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3be8932db766397a9a64fdb4513676c/original-IMG_7394-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc0e38a1befca46286d8abd7ce408d99/original-IMG_7395-1024x768-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cad2dcf2c204f97144cd277d53d9b5fd/original-IMG_7396-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc33339c539fa0f41bce18c204280441/original-IMG_7397-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a738eb59dad75c38c54c4218ce2c25e/original-IMG_7398-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c444de515c370f785d0be4c59454dd89/original-IMG_7399-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64fe81cee6f350e0e19872de187334de/original-IMG_7400-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8acb2b48d6dec9b4bbf5e83f7d08ac69/original-IMG_7402-768x1024-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c20f9c7650190d6dc9ee7332e61b164c/original-IMG_7403-1024x768-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfac45426fb538441bc652987ef325a3/original-IMG_7404-1024x768-1-768x1024.jpg2024-09-25 15:42:39 UTC6152586Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, LED lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, temperature control Personalized options and specification modifications can be asked upon request. Equipped With: CNC Control Software It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Ethernet - USB - 4G - WiFi (Option) Available Ex-Factory, Italy Price On Request Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.300 4CPawtucket, RIhttps://www.goldmachinery.com/listings/6152586-new-lms-goldpro-cnc-high-speed-300-ton-hydraulic-coining-blanking-stamping-press300T410 mm200 mm485 x 630 mm16 DIN 650390 mm/sec4 mm/sec300 mm/sec15 Kw1250 x 1560 x 2675 mm4790 Kg350 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:32 UTC6152587Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, deep drawing, syntherizing, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, halogen lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, blank holder, temperature control Personalized options and specification modifications can be asked upon request. Equipped With: CNC Control Software It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Machine Edition for advanced functionality including trending, expressions, data logging Ethernet - USB Available Ex-Factory, Italy Please Inquire for Pricing Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.500 4CLPawtucket, RIhttps://www.goldmachinery.com/listings/6152587-new-lms-goldpro-cnc-high-speed-500-ton-industrial-hydraulic-forging-stamping-press500800 mm500 mm1200 x 1035 mm560 mm324 mm/sec3.6 mm/sec310 mm/sec18.5 Kw2060 x 2160 x 3675 mm15000 Kg555 Kg€ POR€ PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:33 UTC6152588Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, deep drawing, syntherizing, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, halogen lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, blank holder, temperature control Personalized options and specification modifications can be asked upon request. Equipped With: CNC Control Software It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Machine Edition for advanced functionality including trending, expressions, data logging Ethernet - USB Available Ex-Factory, Italy Please Inquire for Pricing Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT300 4CLPawtucket, RIhttps://www.goldmachinery.com/listings/6152588-new-lms-goldpro-cnc-high-speed-300-ton-industrial-hydraulic-forging-stamping-press300715 mm400 mm1000 x 1120 mm670 mm390 mm/sec4 mm/sec300 mm/sec18.5 Kw1930 x 2280 x 3650 mm11000 Kg490 Kg€POR€ PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:33 UTC6152589Size closed 9"x 8" x 5-1/2"Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentused0577-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152589-used-0577-390-medium-ingot-die-set1-5/16" x 3/8" (approx)3"x 2"30 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a989e3d8ea5c283177f144641fa24869/original-MEDIUM-1-e1400761428683.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08e776f559e915803fbbfd6628fd71e6/original-MEDIUM-41.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1b52c8c5ea1eec47a9154dc9b1b803f/original-MEDIUM-12.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/206f967112ddc33da1f178f6010a0b98/original-MEDIUM-21.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/665bfc891e1c8644afcde46f9e76fec7/original-MEDIUM-31.jpg2024-09-25 15:42:36 UTC61525902025LocatelliT.200 4CFOR MINTING OF COINS UP TO 40mm, BARS UP TO 100gr Control Panel - Modern design swinging / height adjustable monitor; - Colour touch screen HMI 15”; - Allen-Bradley PLC; - Ethernet connection + Teleassistance (Option); - Multiple pressing with timer. This device allows having four pressings with - closed die. In this way the material is stretched at different pressures and - dwell-times, and the user reduce or avoid annealing the piece in the furnace - with better results in relief; - Pressure Ramps: possibility to change the pressing speed by setting - increasing and decreasing pressure ramps (a certain pressure in a certain - timing); - Hologram program; - Lifting program; - Die Cleaning program; - Micron program, allows to press small thickness; - Fast program, allows to increase pressing speed; - Auto-slowdown program, allows to optimize the piston’s slowing down speed; - Magnetic encoder for ram height control measuring system, contactless; - Operative cycle with fine position control ± 0.005 mm.; - Operative cycle with fine pressure control ± 1%; - Setting up of the pressure through HMI; - Safety working limit of the pressure set up by the user; - Ready to fit an automatic feeder; - Pressing mode - Full programming: - Manual - Automatic (Single Stroke) - Continue (only with automatic feeder); - Real position for TDC and BDC; - Programmable Dwell-time for main piston and for ejectors; - Programmable “virtual cams” on upward - downward movement of the piston; - Multi-function counter pieces; - Cycle time; - Hour’s counter; - Axis reset; - Memory of 1000 different programs (Tool n. / Code n.) The Main piston - Pressing Force 200 ~ 2.000 kN (20 ~ 200 Ton) - Ram Stroke 0 ~ 150 mm - Max. service pressure 280 Bar - Down speed 370 mm/s - Working speed 5 mm/s - Back speed 350 mm/s - Back power of the piston 140 kN (14 Ton) - Servo control of the hydraulic pressure; - Fully programmable by HMI. Lower ejector (Option) - The ejector cylinder is fixed on a slide, which allows a fast dismantling without removing any pipe or electric wires. - Adjustable ejection speed. - Automatic or manual selection of the ejector. - Timer of the ejection. - Adjustable force: kN 0~78 - Adjustable stroke: mm 0~40 mm. (mechanical stop) - Surface (Ø): mm 10,5 Upper ejector (Option) - Automatic or manual selection of the ejector. - Timer of the ejection. - Adjustable force: kN 0~100 - Adjustable stroke: mm 10 mm - Surface (Ø): mm 10,5 Air Blowers (Option) - Frontal air blower for blanks cleaning. It is triggered by a sensor when moving a blank to the blowing zone; - Adjustable air blowers to clean the tool. It is possible to set the length and the position of the blows by HMI. Quick die change system (Option) Quick dies change system, designed to reduce timing for clamping the tools to the table of the press, without any additional fine tuning. Water heat exchanger It allows cooling the hydraulic oil with a bundle of copper pipes cooled by the water. Temperature device (Option) - Allows a control of the oil temperature. - An electronic device displays the temperature. - Safety limit temperature with warning with a red-light blinking.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.200 4CItalyhttps://www.goldmachinery.com/listings/6152590-new-locatelli-200-ton-precision-hydraulic-press-t-200-4c-minting-coining-press200395 mm200 mm475mm x 580 mm16 DIN 650400 mm/sec4 mm/sec350 mm/sec11 Kw1180 x 1510 x 2495 mm4,000 Kg325 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-12-12 14:03:14 UTC6152591Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, deep drawing, syntherizing, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, halogen lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, blank holder, temperature control Personalized options and specification modifications can be asked upon request. Equipped With: CNC Control Software It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Machine Edition for advanced functionality including trending, expressions, data logging Ethernet - USB Available Ex-Factory, Italy Please Inquire for Price Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.100 4CLPawtucket, RIhttps://www.goldmachinery.com/listings/6152591-new-lms-goldpro-cnc-high-speed-100-ton-industrial-hydraulic-forging-stamping-press100600 mm250 mm1000 x 800 mm18 DIN 650332 mm/sec4.3 mm/sec238 mm/sec9.2 Kw1765 x 1930 x 2900 mm5500 Kg310 Kg€ POR€PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:33 UTC6152593AB-100 PLASTIC INJECTOR DIGITAL TEMPERATURE CONTROLLER TRANSPARENT SAFETY SHIELD EASY VIEW LARGE HOPPER ASSEMBLY AIRCRAFT SPEC ALUMINUM BODY INSULATED TO PREVENT HEAT LOSS THROUGH MAIN FRAME CLAMP FORCE 4000 LBS SHOT CAPACITY 6 GRAMS (1/4 OZ) INJECTION PRESSURE @125 PSI, 6333 PSI VOLTAGE 120 VOLTS 50-60 HZ, HEAT CAPACITY 400 WATTS, MOLD HEIGHT 2.5" SPRUE CENTER LINE 7/8" MACHINE DIMENSIONS 18 X 21 X 25" HIGH WEIGHT 71 LB Equipped With: Easy to read & adjust digital temperature controller Aircraft spec. aluminum body Easy view material hopper Stainless steel injection chamber & piston for corrosion resistance All pneumatic devices are of the “no-lube” design; ideal for medical & other clean room applications Working area protected by transparent safety-guard and safety red heat shield Right & left hand operation Mold stop and ejector Quick acting clamp for easy operation Hardened screw & bronze nut for long wearMiscellaneous MachineryPlastic Injectorsused3551-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152593-used-3551-400-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-basehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d93499877bf7637ffc262b52323bb165/original-IMG_3501-e1632403862487.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1789ef489de47449b45d51c2149f6193/original-IMG_3507-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95c0ba97d6f6afed97446cba0de3c75e/original-IMG_3508-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2cafc824471b97269b6e551b3ddc17d/original-IMG_3509-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e73b45a42726d98f6c1d71c0c837597/original-IMG_3501-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3eecd3dd107f252956d803bd594eb0dd/original-IMG_3502-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eede3b728a713072186ccb45473515d1/original-IMG_3503-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9812ea066a2b48960d2ffc99f072b1c/original-IMG_3504-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3175c2596c300c99fcc543ba74300d34/original-IMG_3505-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e3c97a2bbd3e7ddb1beed3dfd57e692/original-IMG_3506-768x1024.jpg2024-09-25 15:42:39 UTC6152594Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, deep drawing, syntherizing, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, halogen lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, blank holder, temperature control Personalized options and specification modifications can be asked upon request. ADVANTAGES IN USING A LOCATELLI PRESS, A MACHINE WHICH IS DIFFERENT FROM OTHERS Software to monitor the production costs and the total production management. Implementation of this software creates what has been called a “smart factory” (Option) World wide access to the computer systems of our machinery for analytical diagnostics and subsequent modification / update / tailoring / fine-tuning of our software (Option) Three guiding points on the ram plate for a good parallelism of the table: main piston + two side pistons Perfect control of part’s thickness, with an exact control of pressure, timing and position. No burr on the edge guaranteed Safety for the mould: alarms on double charging, wrong charging (by standard software), no charging (by optional special device) Memory of thousands of programs, with alphanumeric name for an easy recall. Equipped With: CNC Control Software It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Machine Edition for advanced functionality including trending, expressions, data logging Ethernet - USB Available Ex-Factory, Italy Please Inquire for Price Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.35 4CLPawtucket, RIhttps://www.goldmachinery.com/listings/6152594-new-lms-goldpro-cnc-35-ton-industrial-hydraulic-forging-stamping-press35400 mm250 mm450 x 640 mm16 DIN 650570 mm/sec9.5 mm/sec445 mm/sec3 Kw190 x 1340 x 2900 mm1900 Kg178 Kg€POR€ PORhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:33 UTC6152595Scroll Down To See Video! Features: High productivity and very versatile machines for cold or with hot table pressing, suitable for coining, pressing, blanking, etc Four columns structure presses, designed with finite elements method, highly dimensioned and with high rigidity; the automatically lubricated mobile table, which goes up and down on the four columns, and also a perfect parallelism between the two tables give an high degree of precision during pressing Pressure control through proportional valve, high power backward force of pistons. Pumps and oil's cooling system located over the lower oil tank for an easy inspection. Quick response hydraulic plant gives high reliability and reduces the working time Provided with sophisticated control systems, these machines are supplied with touch screen numeric control to set the working programs The machines are provided with all the safety devices, LED lamp, antivibrations feet, very low noise pumps, and can be provided with photocells, automatic feeding, upper and lower extractor with hydraulic cushion, mechanical stop, temperature control Personalized options and specification modifications can be asked upon request. Equipped With: It is possible to memorize working programs, air blowers, extractors, virtual cams to control an automatic feeder and furthermore to set different pressure levels (with timer) in every working cycle It is possible to manage pressure and degazing ramps, by reaching a certain pressure in a certain time Provided with all the safety devices, axis reset, mould’s safety, pressure and position control Selection of an administrator user at various levels, with password Display of position and pressure in real time Hundredth of millimeter adjustment of the working position Cycle time calculation Breakdowns research Teleassistance Touch screen terminal for convenient and flexible operator input choices Includes CompactFlash card slot for transferring files, logging data, or system upgrades Powerful graphics providing clear and crisp visuals Ethernet - USB - 4G - WiFi (Option) Available Ex-Factory, Italy Price On Request Crating of Machine TBDCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewT.75 4CPawtucket, RIhttps://www.goldmachinery.com/listings/6152595-new-lms-goldpro-cnc-high-speed-75-ton-hydraulic-coining-blanking-stamping-press75340 mm150 mm360 x 550 mm16 DIN 650480 mm/sec5,7 mm/sec290 mm/sec4 Kw1020 x 1260 x 2080 mm1700 Kg200 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf26c07825b2966264b7c9e8099e93fa/original-ROBY8923MAR-min2-e1497878559287.jpg2024-09-25 15:42:33 UTC6152596Note: Produces 2 curved ingots: 1. 5/8" x 1/4" (approx.) 2. 1/2" x 1/8" (approx. )Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentused0575-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152596-used-0575-390-curved-ingot-die-set9" x 7" x 5-1/2"4-1/2"x 3"30 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d9584d3e9fc839aa485bf87114f072b/original-CURVED-1-e1400760653652.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b759b07f4256a42afad8906859d9f1cb/original-CURVED-11.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/761416a16b51115c6d5c674262e230ec/original-CURVED-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/22a842be1dd7814d9f439068fa3148b5/original-CURVED-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc40c11538debf3554e7abb3b80a3268/original-CURVED-4.jpg2024-09-25 15:42:36 UTC6152598220V, 10 HorsepowerMiscellaneous MachineryPlastics Machineryused2564Pawtucket, RIhttps://www.goldmachinery.com/listings/6152598-used-2564-pi-industries-model-d-4-granulatorhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7dcd63a066781d7e603c1998b8b55424/original-2564.jpg2024-09-25 15:42:35 UTC6152599Miscellaneous MachineryPlastics Machineryused2565Pawtucket, RIhttps://www.goldmachinery.com/listings/6152599-used-2565-cumberland-granulator-s-n-8158" x 8"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3c58dd312b6f7e00f8e0413e4f16a26/original-2565.jpg2024-09-25 15:42:35 UTC6152600Detects medium-sized pistol at 7"; large pocket knife at 5"; razor blade at 3"; hatpin at 1" Red Alarm light and audible alarm indicates a metal target has been located Easily slips into a shirt or coat pocket and can be held in the palm of the hand Operating procedures written on panel Rugged, high-impact plastic case designed to provide long, dependable service Engineered to operate under rugged conditions Automatic tuning, requires no adjustments Automatic battery check Optional recharging unit permits use of Ni-MH rechargeable batteries Optional earphone for use in noisy or loud environments Equipped With: Operating Temperatures -35°F (-37°C) to 158°F (70°C) Audio Frequency 2kHz Tuning Automatic, no adjustments required Indicators: Speaker, LED Alert Light (Red: ALARM condition) Controls ON/OFF Momentary Switch Battery: Single 9 volt battery provides up to 120 hours of normal operation. Optional NiMH rechargeable battery provides up to 35 hours on each 12-hour rechargeMiscellaneous MachinerySecurity Equipment & Safesused8148-375Pawtucket, RIhttps://www.goldmachinery.com/listings/6152600-used-8148-375-garrett-enforcer-g1-hand-held-pocket-scanner-model-11616-s-n-0982-057To 95% non-condensing90 kHzhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f063d378a222c04caed8f1055e2a1f99/original-8148.jpg2024-09-25 15:42:36 UTC6152601The spindle is hardened and ground. The spindle accuracy is 0.0004 TIR. The indexing plate is precision ground. The directly indexes in 10 degree steps. The vernier provides 1 degree increments. Product application This indexing spin jig is used on milling machines, grinders, and inspection equipment.Toolroom & General MachineryTool Room Equipment & Accessoriesused0227-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152601-used-0227-700-5c-collet-spin-index-fixture4" x 4" x 8" L13lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13efeb7b128a9782098fd75460344809/original-jk-015-e1377001204689.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d533e126819105576b099151184c42e/original-jk-0151-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/615c0b132b0f4fb8cccd13b642248a12/original-jk-016-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92d058fbd297843be57d16a3596db372/original-jk-017-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71f231b13ab553cecb4d8bcfa263b03f/original-jk-018-768x1024.jpg2024-09-25 15:42:39 UTC6152602Speeds: Production (strokes/min): 30 mm p=100% 21 30 mm p=10% 45 10 mm p=10% 65 7500 kg PRICED FOR €134.000,00 EURO (PACKING & CRATING ADDITIONAL) EX-FACTORY ITALYCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewMdM 300 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152602-new-goldpro-mdm-300-ton-combipress-coining-stamping-forging3005000 / 1001.6 mm/sec95 mm/sec60 mm/sec5,5340mm x 240mm x 168mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e0407905f1f0249e66c02305f5ad09d/original-mdm_300_ton-e1363007172720.png2024-09-25 15:42:33 UTC6152603Speeds: Production (strokes/min): 30 mm p=100% 21 30 mm p=10% 45 10 mm p=10% 70 1360 kg PRICED FOR € 42.000,00 EURO EX-FACTORY ITALYCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining EquipmentnewMDM 200 TonPawtucket, RIhttps://www.goldmachinery.com/listings/6152603-new-goldpro-mdm-200-ton-combipress-coining-stamping-forging2007000 / 602 mm/sec145 mm/sec75 mm/sec5,5320mm x 220mm x 168mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0db20b7449179f44d44148377241992d/original-mmbm200.png2024-09-25 15:42:33 UTC6152604Three position switch with selection of two different alarm modes, silmultaneous optical and acoustic alarm Built in buzzer ( 75 dBA at a distance of 90 cm) Optical alarm and handle vibration Sensitivity adjustment by means of a three position external selector Battery life in continuous operation with alkaline batteries: 150 hours max with NiMH batteries: 40 hours max Indicator lamps for power on (green light)/ Alarm(red light) Low battery charge (blinking yellow light) Operating temperature: -15 degrees C. to 65 degrees C. ( relative humidity: 0-95%) Weight with battery 0,400 kg.Miscellaneous MachinerySecurity Equipment & Safesused8149-375Pawtucket, RIhttps://www.goldmachinery.com/listings/6152604-used-8149-375-ciea-model-pd-140-hand-held-scanner9V dry battery340 x 80 x 55 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acc290698043ffc2f09b30069e7bc456/original-8149.jpg2024-09-25 15:42:36 UTC615260524" X 36" X 4" No LedgeToolroom & General MachineryTool Room Equipment & Accessoriesused8002-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152605-used-8002-700-black-granite-surface-plate400 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/172d72403e6f0a65ec095f39e776f8b3/original-8002.jpg2024-09-25 15:42:36 UTC6152606Dove tail bedToolroom & General MachineryTool Room Equipment & Accessoriesused7495-440Pawtucket, RIhttps://www.goldmachinery.com/listings/6152606-used-7495-440-turret-attachment-for-hardinge-lathe5/8"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/531d4e5356f8f640c2c3a216bf52daca/original-t-002-e1364314360727.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/241e1229f1d6a305acfe6740de6854b0/original-t-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b8feacdc2817dd59b7d9d027bdecab2/original-t-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ad892267c3d04b8e489b5786cc0ac92/original-t-0011-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1299ea7028bfb95a038822afa115b1a/original-t-0021-1024x768.jpg2024-09-25 15:42:38 UTC6152607Used Chatillon Model DPP-30 Mechanical Dial Push/Pull Gauge Technical Data: Capacity:500 Grams, Graduations:5 Grams, Used by Hand Or With Test Stand NewToolroom & General MachineryTool Room Equipment & Accessoriesused2696-700Pawtucket, RIhttps://www.goldmachinery.com/listings/6152607-used-2696-used-chatillon-model-dpp-30-mechanical-dial-push-pull-gaugehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6554ef5b1f92da9f23a092d506aa182d/original-2696.jpg2024-09-25 15:42:36 UTC6152608Voland & Sons Inc New Rochelle NYEquipped With: Beam Locking Lever Levelling Pads Brass Post for Beam 1 Set Of Weights Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0167-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152608-used-0167-voland-balance-beam-scale1423"w x 11"d with 1 Drawer 21"w x 10½"h x 2 5/8"d24"h x 23"w x 11"d6¼https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/124b2089ce728daf6f08ac1b78af6511/original-0167.jpg2024-09-25 15:42:38 UTC6152609Item #5862-385 New Professional Series Leather Machine Belting & Steel Universal Couplings for Straight Line and Rotary Engine Turning Machines, as well as most other belt driven machines Available as follows:: (1) 100′ roll of 1/4″ round leather belting Price: $212.00 (price per foot: $4.00) (1) 100′ roll of 3/8″ round leather belting Price: $315.00 (price per foot: $5.00) (1) Set of 1/4″ Universal Threaded Couplings for round leather belt Price: $48.00 (1) Set of 3/8″ Universal Threaded Couplings for round leather belt Price: $54.00 Note: One extra set of 1/4″ x 3/8″ has been included in addition to what is required for the machines Delivery, In stock, UPS or USPS is additional, packing is includedAntique Machinery & ToolsEngine Turning & Brocading Machinesused5862-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152609-used-5862-new-professional-series-leather-machine-belting-steel-universal-couplingshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5a5fdf9a899ea414000e98f229f9eef/original-5862.jpg2024-09-25 15:42:38 UTC6152610Useful holding size: Approximately 4-1/2" x 2" ( Based on how the Jaws are designed) Constructed of machined steel 2-Jaw self-centering designAntique Machinery & ToolsEngine Turning & Brocading Machinesused5709-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152610-used-5709-antique-vise-custom-made-for-engine-turning-guilloche-machines6-3/4" x 2"4-1/2"3 lbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5893044e700d35215d2407477cd4f59d/original-5709.jpg2024-09-25 15:42:38 UTC6152611Duplicate patterns from these pattern bars will be cut on new patterns bars to fit your straight line engine turning machine.Antique Machinery & ToolsEngine Turning & Brocading Machinesused4264-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152611-used-4264-385-antique-set-of-43-master-pattern-bars-for-straight-line-engine-turninghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b98256ef44b678caf6496b860a43e67/original-4264.jpg2024-09-25 15:42:37 UTC6152612Brass and Steel Construction Equipped With: Adjustable Indexing LeverAntique Machinery & ToolsEngine Turning & Brocading Machinesused5382-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152612-used-5382-385-antique-tube-pen-cylindrical-holding-device-engine-turning-guilloche-machine-circa-1890-rare1-1/2"1-3/4"6-1/2"7/8"11-1/4" X 1-1/4"X 2-3/4"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c005e7fd2637fc55c6bd5cbfb264d8fa/original-IMG_7629-e1439382288983.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81918d3aa68c015c23003d67cf8ec48f/original-IMG_7624-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/389a5b7f5c0a40bfd75e8ab136e5612c/original-IMG_7625-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/187023818fec2504cb051caf7d58ac9c/original-IMG_7626-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cc601f7dc6a617bcbb07e93f2609b5f/original-IMG_7628-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ca77c325238c98a01b657a6b50d5dba/original-IMG_7629-768x1024.jpg2024-09-25 15:42:41 UTC6152613Equipped With: Wood & Glass Case, 1 Drawer Brass, Post Locking Lever, Levelling PadsAntique Machinery & ToolsAntique Scalesused0163-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152613-used-0163-troemner-balance-beam-scale12½" W x 9½" D x 17½" H8"2 2/4"17" W x 9½" D x 4" H12½" W x 2½" H x 8¾" Dhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e49f12a9bd66a79a31796a2aed502689/original-0163.jpg2024-09-25 15:42:38 UTC6152614Wood-glass Enclosure Gold Balance Scale Size: 17d x 42"w x 36"h Reconditioned AntiqueAntique Machinery & ToolsAntique Scalesused0416-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152614-used-0416-becker-balance-scalehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb4b52279853a17a716d45a09a7623a8/original-0416.jpg2024-09-25 15:42:39 UTC6152616Circa 1940 Mahogany Case Wood & Glass Bench ModelAntique Machinery & ToolsAntique Scalesused2020-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152616-used-2020-becker-chain-o-matic-balance-scale16½" w x 9" d, w/ 5 Weightshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa9be5143924f76f46e806e153b17c1b/original-2020.jpg2024-09-25 15:42:39 UTC6152617500oz Capacity 3 Weights Antique Brass ConstructionsAntique Machinery & ToolsAntique Scalesused0281-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152617-used-0281-balance-scale-weight-set-wood-casehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8a7a90cdf12febf22512decee1cbdb8/original-0281.jpg2024-09-25 15:42:39 UTC6152618Wood Base w/ marble Top Mod. Pharmaceutical ScaleAntique Machinery & ToolsAntique Scalesused0152-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152618-used-0152-balance-scale19w x 8½"d x 5¼"h19"w x 8½"d x 7½"h8"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3aeb67a598f342d34b1216a4f26e7039/original-0152.jpg2024-09-25 15:42:39 UTC6152619AntiqueAntique Machinery & ToolsAntique Scalesused0239-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152619-used-0239-platform-deck-scale14 x 10"25 Troy Oz.19"h x 22"d x 17"whttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae76135608e0874181c0440e4a99c65a/original-0239.jpg2024-09-25 15:42:39 UTC6152620Voland & Sons Inc, New Rochelle NY, for Central Scientific CoModel 750d Beam Width: 9 Base Size: 17"w x 9¾"d x 5¼"h with Drawer Equipped With: Beam Locking Lever Levelling Pads Metal & Glass CaseAntique Machinery & ToolsAntique Scalesused0182-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152620-used-0182-voland-balance-beam-scale20 5/8"h x 17"w x 9¾"d2½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe3e7b440d522982f302c96916f4f9f6/original-0182.jpg2024-09-25 15:42:38 UTC6152621Circa 1920 Wood Case 2-pan with WeightsAntique Machinery & ToolsAntique Scalesused2022-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152621-used-2022-kohlbusch-portable-diamond-gold-scale2½W, x 6" L, x 1¼"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74bc9e00e5b31e1342e3ac52dfdb4355/original-2022.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13deabb4bfbfe428698d70674c49b959/original-2022_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/058f55c6f35430e7d4f69498d89d95c7/original-2022_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd0c57d8146fd77c5ef14926863db286/original-2022_3.jpg2024-09-25 15:42:40 UTC6152622Weight Balance Scale Cast Iron & Brass Overall Size 24"w x 22" O x 26"h Equipped With: 3-piece Holding Baskets Small Medium & LargeAntique Machinery & ToolsAntique Scalesused0404-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152622-used-0404-platform-deck-scale12 x 15½"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8759832a0b3ef83f28b72ad9316335ec/original-0404.jpg2024-09-25 15:42:39 UTC6152624500 Troy Oz Capacity w/ Weights Wood Case Brass ConstructionsAntique Machinery & ToolsAntique Scalesused0268-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152624-used-0268-seiko-balance-scale-weight-sethttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb9adfbb8532f3aee55ef568f05c373d/original-0268.jpg2024-09-25 15:42:39 UTC6152625Seederer-KohlbuschBrass Beam Width: 20 Base Size: 29¼"w x 13"d with 1 Drawer 23"w x 12"d x 13 5/8"h Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0203-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152625-used-0203-kohlbusch-balance-beam-scale29¼"h x 29¼"w x 13"d8½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe05394cae02917049bfe4c3fdfa237e/original-0203.jpg2024-09-25 15:42:39 UTC6152626Rotary Type PAT. 10388 Floor Model Wood Base Manual Operation by Hand Wheel Equipped With: 7 Rosettes Brocading Attachment with 5½" Diam. Model Holder 3" Vise Left & Right Rubbers Gear Driven Cam & Rope Radius Attachment Brocading-copying, duplicating and reducing- is a method by machine utilizing decorative and commemorative design plates to reproduce designs from master design plates to medals, coins, brooches, medallions, bracelets, pendants and a plethora of jewelry and award products in metal, plastics, etc. See our available brocading plates & rolls in stock: Additional Photos:Antique Machinery & ToolsEngine Turning & Brocading Machinesused0363-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152626-used-0363-385-ra-lienhard-chaux-de-fonds-brocading-engine-turning-machine-circa-19037½" Diam.49" x 44" x 53"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/671091db4c08e4eeb7e29ed52ecbdaa5/original-0363-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57781ff73e07edf7216bde0dd7de5e96/original-0363-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c5b1804b6bd0157353518731d504e1f/original-IMG_0132-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50087df4dd2141493e94066858fa7587/original-IMG_0133-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff8ebf46fb05763bd5d02f47a588ffe2/original-IMG_0134-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b38ddb1b32b85d0425c618b610b63ef/original-IMG_0136-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/706e7d44c09be5ad569dbd63a4a37911/original-IMG_0137-1-1024x768.jpg2024-09-25 15:42:40 UTC61526272000 Dwt (2) 4 Dwt (16) Chrome Weights Complete Set In Wooden Carry CaseAntique Machinery & ToolsAntique Scalesused1034-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152627-used-1034-henry-troemner-balance-chrome-weight-sethttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a86fd9137d9aee816bffe69edb9cf0dd/original-1034.jpg2024-09-25 15:42:39 UTC6152628Made by F Sartorius Gottingon Beam Width: 6 Base Size: 15½"w x 11½"d with Drawer Black Glass, Base Plate Equipped With: Beam Locking Lever Levelling Pads Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0198-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152628-used-0198-f-sartorius-gottingon-balance-beam-scale19¼"h x 15½"w x 11½"d3https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca7db4d87bc5d7f304e897427900a12a/original-0198.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb2c2a13127f49a52b96d42b14504e1d/original-0198-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79542451439f153c3edbc2054511ae23/original-0198-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9224d08fae656794e79baaa53e7011c9/original-0198-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34027076a4bf505601df212ccb9b08ab/original-0198-008-768x1024.jpg2024-09-25 15:42:41 UTC6152629Equipped With: Wood & Marble BaseAntique Machinery & ToolsAntique Scalesused0160-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152629-used-0160-pharmaceutical-balance-scale14½w x 5½"d x 3 3/8"h14½"w x 5½"d x 6"h5¼"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/678d82da81beb5bb54b08b6ab3233bed/original-0160.jpg2024-09-25 15:42:39 UTC6152630Antique Machinery & ToolsAntique Scalesused0244-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152630-used-0244-385-balance-beam-scale6"10"W x 6"D x 2¾"H9¼"W x 1¾"H x 5"D3 1/8"D11½"H x 10"W x 5½"Dhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ed0386de61451c5e261202858b00e3e/original-0244.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2aac5f8ba417ad5862abff0af9f2127/original-IMG_8247-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f99b07242bd8767c8e74845a1fdd49cf/original-IMG_8242-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a4908ceb86d724c2b9393d1a33b1c6f/original-IMG_8243-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76fce1fb57800ba7d450b82c417c601a/original-IMG_8244-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/897526e0872f038b51d2be06333783bb/original-IMG_8245-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c0b4fb54f874cf620d22a3b21aecbb6/original-IMG_8246-768x1024.jpg2024-09-25 15:42:43 UTC6152631Wood, Glass & Marble No. 89-1 N.Y.C. Appd., Type 17 Pan Size: 8", O/A Size: 8½"w x 7½"h AntiqueAntique Machinery & ToolsAntique Scalesused0242-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152631-used-0242-pharmaceutical-balance-scale8 Lbs.18½"w x 7½"d x 5¼"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7eb365dd9a7f22718e7a11d3fbcaa905/original-0242.jpg2024-09-25 15:42:39 UTC6152632Seederer-Kohlbusch IncBrass Beam Width: 28 Base Size: 42"w x 18"d with 1 Drawer 35"w x 17½" D x 4½"h Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0202-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152632-used-0202-kohlbusch-balance-beam-scale38½"h x 42"w x 18"d10https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86910b9f4d0890f7e5bf34800a19dce2/original-0202.jpg2024-09-25 15:42:39 UTC6152633Brass Beam Width: 14" Base Size: 20"w x 9"d with 1 Drawer 15½"w x 7½"d x 2"h Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0200-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152633-used-0200-balance-beam-scale22"h x 22½"w x 11"d6https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b9ae327b80a90dcba07333c1f318724/original-0200.jpg2024-09-25 15:42:39 UTC6152634Equipped With: Wood Glass & Marble Case, Locking LeverAntique Machinery & ToolsAntique Scalesused0195-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152634-used-0195-pharmaceutical-balance-scale13¼w x 8¼"d x 7½"h13¼"w x 8¼"d x 7½"h3"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fe737de33750b78166b729d6a219e46/original-0195.jpg2024-09-25 15:42:39 UTC6152635Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0174-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152635-used-0174-balance-beam-grain-scale9½"13"w x 7"d x 4½"h with Drawer7½"h x 13"w x 7"d2"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59cc5641cc406d22695ef9a5a2694de4/original-0174.jpg2024-09-25 15:42:39 UTC6152636Antique Machinery & ToolsAntique Scalesused0238-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152636-used-0238-detecto-scale-216 Lbs. Or /8 Kg.9 Cast Iron & Brass20"w x 9"d x 7 ¾"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01ef76affb473227b95661f8662985b5/original-0238.jpg2024-09-25 15:42:39 UTC6152637Equipped With: Beam Locking Lever Levelling Pads Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0179-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152637-used-0179-balance-beam-scaleEimert Amend NY8½17"w x 9½"d with Drawer17"h x 17"w x 9½"d2½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c48fd8563012fbbd40559418714629ec/original-0179.jpg2024-09-25 15:42:40 UTC6152638Equipped With: Wood Glass & Marble Case, Locking Lever Levelling PadsAntique Machinery & ToolsAntique Scalesused0159-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152638-used-0159-pharmaceutical-balance-scale1½Oz14½w X 6½"d x 4 5/8"h14½"w x 6½"d x 7"h2¾"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47b7c01b436fb9aaa1314cdadbdb7ff2/original-0159.jpg2024-09-25 15:42:40 UTC6152639Brass Beam Equipped With: Beam Locking Lever Levelling Pads Brass Post for Beam Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0175-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152639-used-0175-daubet-hopken-balance-beam-scale9"16 1/8"w x 7½" d x 3¼"h with Drawer 11¾"w x 6¾"d x 2 3/8"h15½"h x 16½"w x 7½"d2¾"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3bed662b2fff4d55f529461451db8e35/original-0175.jpg2024-09-25 15:42:40 UTC6152640Equipped With: Brass Beam Locking Lever Levelling PadsAntique Machinery & ToolsAntique Scalesused0129-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152640-used-0129-wood-glass-case-balance-beam-scale1526¾"w x 3½"h x 11"d26¾"w x 11"d x 20¼"h21¼"w x 2¼"h x 10¼"d6¼"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2631f7f9c58ac98851561221e46ea5a/original-0129.jpg2024-09-25 15:42:40 UTC6152641Spoerhasevorm Staudinger GiessenBase Size: 16"w x 12"d Overall Size: 17¾"h x 16"w x 12"d Equipped With: Beam Locking Lever Levelling Pads Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0207-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152641-used-0207-spoerhasevorm-staudinger-giessen-balance-beam-scale8½½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c8041c64a2ebd52948d5fecbdef47fc/original-0207.jpg2024-09-25 15:42:40 UTC6152642Equipped With: Beam Locking Lever Levelling Pads Wood & Glass CaseAntique Machinery & ToolsAntique Scalesused0208-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152642-used-0208-balance-beam-scale24"6¾"18"h x 27"w x 5"d2½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6845be67a231a43144de86eb21cd4ef/original-0208.jpg2024-09-25 15:42:40 UTC6152643The Torsion Balance Co, NY, Balance Scale BaseStyle 277 Equipped With: Beam Locking Lever Levelling Pads Scale Is In Wood & Glass Case Overall Size: 12¾"h x 18"w x 10½"dAntique Machinery & ToolsAntique Scalesused0199-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152643-used-0199-torsion-balance-co-balance-beam-scale13w x 5½"d with Drawer6½"h x 13"w x 5½"d3https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b30547e9990deffd96703ca0654764a0/original-0199.jpg2024-09-25 15:42:40 UTC6152644C&E Marshall Co., Chicago, Model "Marco", No-Break Fitting Machine Equipped With: Cups & Plugs, Foot Control, Wood Cabinet Mounted, with Instructions PamphletAntique Machinery & ToolsMiscellaneous Antiquesused0978-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152644-used-0978-watch-crystal-fitting-machine-circa-1920https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2aa14d67e4477bf5117001301ad127e0/original-0978.jpg2024-09-25 15:42:40 UTC6152645Antique Machinery & ToolsMiscellaneous Antiquesused2973-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152645-used-2973-foot-powered-grinder-sharpenerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2749628625aced033ceeb21c9127d54/original-2973.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afc7fb003014f71f41f44f842a7e3c2e/original-IMG-5402-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c352513e207a49f939c77c81dcf98da7/original-IMG-5403-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffa99b5cb2a95d91fabf8a4cecf07e42/original-IMG-5404-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e309c267281a2fffdcc9826111cfe5d/original-IMG-5405-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ee7edec2704069572f7ebe9618e0301/original-IMG-5406-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e550833716d47046a76e6ab8e3e46277/original-IMG-5407-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b57a23d132200dfcbf851bf0711eb061/original-IMG-5408-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6e8bef0da8c61aead08206ef9cf722d/original-IMG-5409-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2608c3189912c87309a09ee00d8a06e/original-IMG-5410-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c0322ff700063e1a4b0a43465fb4cbe/original-IMG-5411-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b8e08d9a8f16bec1a82f70619126f52a/original-IMG-5412-1024x768.jpg2024-09-25 15:42:45 UTC6152646Bench Model Decorative Bird Level Ornate Cast Iron Base (black & Gold) AntiqueAntique Machinery & ToolsAntique Scalesused0270-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152646-used-0270-pan-type-balance-scalehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cad1a10f81a896806de02b40feeae4f7/original-0270.jpg2024-09-25 15:42:40 UTC6152647Arabic Numbers Brass & Glass Construction Operated On Fluctuations In Air TemperatureAntique Machinery & ToolsMiscellaneous Antiquesused0232-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152647-used-0232-jaeger-le-coultre-atmos-clock9¼h x 5½"d x 8½"whttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/caf17358c0aa9b7b46776fa83aaed38c/original-0232.jpg2024-09-25 15:42:40 UTC6152648Model 6200-5 Manufactured by IBM, Endicott NYAntique Machinery & ToolsMiscellaneous Antiquesused2257-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152648-used-2257-international-time-recorder-model-6200-51911-191699 Employee Roll Recorder Antiquehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a4a65f99661a1fd8033d5794c2d7bee/original-2257.jpg2024-09-25 15:42:40 UTC6152649Platform Size: 6¼x 6¼" O/a Size: 10¼"h x 6 ½"w x 7"d AntiqueAntique Machinery & ToolsMiscellaneous Antiquesused0240-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152649-used-0240-american-cutlery-co-chicago-spring-bal-plunger0 To 20 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68127525902bfff80e767f1b9cbc5612/original-0240.jpg2024-09-25 15:42:40 UTC61526502 Piece Construction In Light Oak 46 Drawers 56 Cubby's Brass Hardware Circa 1940 Reconditioned AntiqueAntique Machinery & ToolsMiscellaneous Antiquesused0414-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152650-used-0414-cleveland-twist-drill-company-cabinet4'w x 22d x 82"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c16ab94d38dcf4fe6f22ba70e04465c/original-0414.jpg2024-09-25 15:42:40 UTC6152651Bench Model 115volt/1amp Wood Construction Equipped With: Carrying Handles ReconditionedAntique Machinery & ToolsMiscellaneous Antiquesused0510-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152651-used-0510-demagnetizer-model-436-mfg-by-d-w-fuse-company16"W x 11"Deep x 9"Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15c91e4916d706a0ad780a4e60263f60/original-0510.jpg2024-09-25 15:42:40 UTC6152652W x 15½"h x 18" D Equipped With: Key Lock with Key Wood ConstructionAntique Machinery & ToolsMiscellaneous Antiquesused0368-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152652-used-0368-oak-wood-tool-chest33½https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff2e93849ad7d81b765595656e8b5ef3/original-0368.jpg2024-09-25 15:42:41 UTC6152653Model #4HM S/N 4F-14-HM Equipped With: 3 Reconditioned Test Weights 1/16" Steel Ball Penetrator 4" Diameter Zerominder Analog Gauge Open Leg Steel StandAntique Machinery & ToolsMiscellaneous Antiquesused0288-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152653-used-0288-385-antique-wilson-rockwell-b-c-scale-hardness-tester100 KG150 KG  (Brale)12"5-1/4"8"W x 21"D x 29-1/2" H12" W x 22" D x 66-1/2" H180 Lbs  (approx.)200 Lbs.  (approx.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9e10fadf9cd2729df9d6d92375b321a/original-0288-2-e1437577727226.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1aab55dc90f5dc3f68df5cfb3c5112e0/original-0288-1-main.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df9f41dddc88c65d6c67913c7454c9dc/original-0288-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/577cc3045dd0d48ec9698ba3c3f172f1/original-0288-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/81e37acb350126993aa7de10cd9f7397/original-0288-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b27d010b8bb43c89efebcec773de99d/original-0288-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29c3fe765273aef56fb5bce516616e94/original-0288-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3867305192e04c1ad5a4a2c7f927845/original-0288-7.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7696b3b2acd1ffea6c5d7f61b3679e8/original-0288-8.jpg2024-09-25 15:42:45 UTC6152654Wagner 1/15v Motor: 1/3hp Single Phase Tilting Table: 14"x12" Equipped With: 9" Fence/Disc Sander with Table 12" x 5" Sold by the Reynolds Machinery Co. Providence RI Note: One of the First Machines Shipped by the Delta Company. Circa 1920Antique Machinery & ToolsMiscellaneous Antiquesused0155-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152654-used-0155-combination-bench-model-table-saw-with-fence-disc-sanderhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/401e55e4126be34f6bfcf2f81fafdc05/original-0155.jpg2024-09-25 15:42:41 UTC6152655TOOLED TO MAKE JUMP RINGS wire size 0.075 & link O.D. 0.293 Belt Driven Less Motor Circa 1890Antique Machinery & ToolsMiscellaneous Antiquesused0278-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152655-used-0278-385-cable-angemeldt-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e46b7c26378909f283709a03ee6e418/original-12-e1436875114957.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ce39b149a888c8208248cb303d594ac/original-IMG_7153-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7889fcf7f79fce5d0eaa777cf3eae415/original-IMG_7154-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6284f50381e37317d2df95836f31b59a/original-IMG_7155-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3a19cb081ce29b5440e14dbd6a6585e/original-113-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7f0cdf5676d010e2bd672676aff24ff/original-2-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a7c9a65e0645ee023394392f5dd2c86/original-3-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c82fc657a05097c2cc9d1803699a5003/original-4-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f9cf90e5d132284e961d80faa9ad587/original-IMG_7151-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef67bd015f302692aee3e7c2af38f2ab/original-IMG_7152-1024x768.jpg2024-09-25 15:42:47 UTC6152656Circa 1890 Complete w/ piercing ToolAntique Machinery & ToolsMiscellaneous Antiquesused0273-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152656-used-0273-blaisdel-3-foot-presshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ae3485cea3175b7f2ea8b4499293c80/original-0273.jpg2024-09-25 15:42:40 UTC6152657CIRCA 1890 Equipped With: 1 TOP STORAGE AREA 3 PULL-OUT DRAWERS ASSORTED TOOLSAntique Machinery & ToolsMiscellaneous Antiquesused8283-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152657-used-8283-385-antique-woodworkers-wood-tool-box-with-tools19" W x 12" D x 11" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15afd7598a40abb036499d471f0f1ebc/original-8283.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/228e50a3d3df80ee145788081d8f4e0f/original-8283-4-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e70a70a0eb6e9eec9634aea958200d95/original-8283-5-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88cced4b87a914167b3b121c56e7ed6c/original-8283-6-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70344b33ee3c86121a0e024eab26e1b9/original-8283-7-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a627a122245e1964edbf5a86b0e6e4be/original-8283-8-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/adbefb5ca1a2b8066c53627e0b064cf9/original-8283-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42067dbb6da667d516d6d91ee7a73d7e/original-8283-3-1024x768.jpg2024-09-25 15:42:45 UTC6152658Circa 1920's 64 - wood pullout parts drawersAntique Machinery & ToolsMiscellaneous Antiquesused8297-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152658-used-8297-385-antique-wood-parts-cabinet62"(w) x 21"(d) x 41"(h)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab245a0f2094d7a5f5cde7c279a38f0e/original-8297.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8efb733e6eb4bfb1ab38f6c5843d149a/original-8297t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20e6a7be872005effa887721c6b40d06/original-cabinet-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64f0332f193916d8a8d53440580a2fab/original-cabinet-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b131e50eb00bed027c96c8e3f7c34079/original-cabinet-009.jpg2024-09-25 15:42:45 UTC6152659Tooled for Jump Rings Belt Driven Less Motor Bench Model Circa 1890 MADE IN GERMANYAntique Machinery & ToolsMiscellaneous Antiquesused0279-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152659-used-0279-385-rare-antique-cable-chain-machine-link-making-germany-circa-1890https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bbd8b206ce4c1f7c99105ec06ce0adf/original-IMG_7160-e1436875753623.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/565298b5602bad696b6a2a1ad26acc5f/original-IMG_7160-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0b26c8af7d4246669304d0b7b21ceb4/original-IMG_7161-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f749668a3eab5ca6c2907656d12ddd8/original-IMG_7162-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ad9115826cee3bf0003143e02b2e470/original-IMG_7163-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3195a66ba88a1a6b6babd3172b8c9610/original-IMG_7164-1024x768.jpg2024-09-25 15:42:43 UTC6152660Manufactured by W.F. & J. Barrels in Rockford, IL, Patented 1876 Equipped With: Steel fabricated seatAntique Machinery & ToolsMiscellaneous Antiquesused7224-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152660-used-7224-385-antique-pedal-operated-bicycle-style-scroll-saw-circa-187623"19-1/2" diameter3-1/4"57"(l) x 20"(w) x 46" (h)170 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1397d267a047eaf14279840b60465145/original-7224-2-e1386359196890.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/05849dac196ebbefe67795b77a1f68ae/original-7224-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/735258420d8a902d0a74735ed7ea7ec9/original-7224-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02fa01521b687851d96af81699827e5b/original-7224-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/469d677db1f5e4714cbd3f2354fe2b6e/original-7224-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fb05bc678a8c35cbe804877bee7ef65/original-7224-5.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83dd0ed621990547bb3d84fef0d38c00/original-7224-6.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f3bc106f40431515c604c97b5752b35/original-7224-7.jpg2024-09-25 15:42:47 UTC6152661Serial#1821 NEW 1967 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7058-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152661-used-7058-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b617a12d7d64e8aee94d13f160bfe9a/original-7058.jpg2024-09-25 15:42:43 UTC61526623.94 Swing 4.33 Between Center 11" Bed 4 Speeds Tip Over Tool Rest 3-Jaw Chuck Drawbar Foot Switch 1 Phase Equipped With: X-Y precision crosslide, intermediate jack shaft/cone pulley for additional speeds, thirty-four assorted WW collets, 110VAntique Machinery & ToolsMiscellaneous Antiquesused2986-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152662-used-2986-boley-precision-jeweler-lathehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c05fa6eb842954688459e21a73b4f79/original-2986-002-e1383591442666.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4115a8b9b670575813393b586813f08/original-boley-010-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff7dec6a566cfbfae85bdead5a823fc6/original-photo-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9420d97c33a41766f6e31921492031e5/original-photo-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/565c75ffaca7eb66d7adc5c906f3b4b6/original-2986-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01a27503238b5c72b661246a5d78e8ef/original-2986-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52a8fb339b0d925c61b48bf7f4bcc326/original-2986-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/009b65a955ac6f9a76acdcddc385c792/original-2986-006-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2fdfb46ca2231af67e6c0c43e38e4d68/original-2986-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80f348fcfeebcec0e354a8c89c185bfb/original-2986-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b953ef3837756e2a5a78ede24f423a7/original-2986-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1789ac1660174581707d50df023b03f1/original-2986-010-1024x768.jpg2024-09-25 15:42:46 UTC6152663Note: Less motorChain Making/ManufacturingChain Making Machinesused2405-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152663-used-2405-100-fico-cuban-link-chain-making-machine-cuban-link-chain0.50mm wire140 links per minute26" x 22" x 15" high100 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b554da9251f1814e631b0c2ce938cb1/original-2405-1-MAIN-e1475863146466.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd2bca7e1b9ad736e1c62e244d3e102a/original-2405-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dfe891f6d1c30bcfdf758f6370478678/original-2405-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/860510084d6be8ad98b4352154a5be27/original-2405-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ec1dfeaacf58f0a2bc53110474152d01/original-2405-3.jpg2024-09-25 15:42:46 UTC6152664208V / 1PH / 50 HZ S/n 184/80 Tooled 0,30 mm ~ wire size Equipped With: Speed variator forced Lubrication with backoil tank Automatic stop for chain Push button controls Spool holder Stand manualChain Making/ManufacturingChain Making Machinesused3324-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152664-used-3324-100-ombi-double-curb-wire-rope-chain-machine1,0mm0,15mm160/380 Links per min28" x 22" x 47" high275 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86a72bfe723afa7dd4992fb17b879124/original-0022-e1506684873489.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac523b02c15fcbeca9ece5e9be2c3ceb/original-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c52fa582210e78eaa5e91fb66138066/original-0104-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/538b5ea7a410b927275acdd08be5d998/original-0141-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4cd3c8c57b4f0d9105eba67fcd4badf9/original-0173-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3670edcbc8656589db2ef0b152b83fa2/original-0193-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02608dff8fbd76bc2d4953f5662008e2/original-0213-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4df653ce12d4b6d77077c42744e6d122/original-0222-1024x768.jpg2024-09-25 15:42:48 UTC6152665Note: Less motorChain Making/ManufacturingChain Making Machinesused2401-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152665-used-2401-100-fico-cuban-link-chain-making-machine-tooled-0-50mm-cuban-link-chain0,50mm cuban link chain140 links per minute21" x 15" x 13" high70 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5d4fb70a6a18f385433d299a83298f2/original-2401-1-MAIN-e1475862545441.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f976878c33eabf940a081af894300542/original-2401-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59a9bc8ca39d7e8c4392fea9ad16b810/original-2401-1-MAIN1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34d178246cb9f59f063222def35eec2b/original-2401-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3f53ca51586cef09617bcdd78c34579/original-2401-3.jpg2024-09-25 15:42:48 UTC6152666Stand Mounted 220/380v / Single Phase 4HP MotorChain Making/ManufacturingChain Making Machinesused8508-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152666-used-8508-100-ombi-model-ftr10-boston-link-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af5c3911768e694203e26c26d2d287d5/original-b-link-011-e1375702569597.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82f3943bab4ef32523bcd5583e0b16d3/original-b-link-0111-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f1dbf202ee786f67db4143d08dac2674/original-b-link-012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5f34b2f67d059a54596d622e6ed0584/original-b-link-013-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20c98b8d021430539f935c21a73167be/original-b-link-014-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3fe8c6805a4f758ce16e9eefaa42151/original-b-link-015-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e571e9a193ec5ff85ed091dd4f462fa5/original-b-link-016-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d91a57990b87e306c7910118502aa02b/original-b-link-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aff6a7f7d7ae355038ef43fa7dc87436/original-b-link-0051.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/091f7acd0152df1691775b92de1a0057/original-b-link-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc85347d880d1f36af52e775a62896ec/original-b-link-0011.jpg2024-09-25 15:42:51 UTC6152667Stand Mounted 220/380v / Single Phase 4HP MotorChain Making/ManufacturingChain Making Machinesused8509-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152667-used-8509-100-ombi-model-ftr10-boston-link-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68dab1feef37c1ddff21917e3b1cce13/original-8509-006-e1375302263538.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f0d896c8acb57ad4b3a76f09910ce0d/original-8509-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d55ca0f668223deaf4e7875acaca154/original-8509-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d23b4f69e984295a155a425c00a42eb6/original-8509-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3acbcb427fa0169b839976e238a67f85/original-8509-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa2c112eb916d0c99dbfcab4f8827216/original-8509-0061-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2ca943d3311e6e500e07259ab35e267/original-8509-007-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/478415c84c15c1bb4c882b1b3c2b3655/original-8509-008-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffcb546854c8a6228eb27f3c9a610cf8/original-8509-009-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1357fb825a85e78d78280ccb4b17fa9/original-b-link-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d79f47ee81fb10b14f501ae51c09928f/original-b-link-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc7e9b998081f70b1258b6bbbc792adb/original-b-link-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee7f0794535b44a11649f3f6645ebe91/original-b-link-009.jpg2024-09-25 15:42:53 UTC6152668Tooled 22mm wire size Approximate weight 160 LBS Equipped With: Wire straightener PLEASE NOTE - There is a crack in the hand wheel as photographed however It dose not affect the function of the machine Offered Less motorChain Making/ManufacturingChain Making Machinesused9426-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152668-used-9426-100-rico-double-cable-chain-machine-tooled-22mm-wire-size-with-wire-straightener22 x 10" x 21" hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e843aa621457eec1fa841d0c53a22f02/original-IMG-8533-1-e1538063720961.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dad4eb83971205afffae745c57849c25/original-IMG-8521-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0762060176d18e9da25bfc0d98380de1/original-IMG-8523-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa5ce6648677ac537ad20b10d91c4600/original-IMG-8533-1-1-1024x768.jpg2024-09-25 15:42:47 UTC6152669Theodore Bechtold ( Germany) Cable Chain Making Machine Motorized - 220/380 3 Phase 50 Cycle - 0.53/0.92 Amps 2800 RPM Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7059-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152669-used-7059-100-small-theodore-bechtold-germany-cable-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/552555486e59d466b99e7c1a8f232616/original-7059.jpg2024-09-25 15:42:43 UTC6152670Stand Mounted 220/380v / Single Phase 4HP MotorChain Making/ManufacturingChain Making Machinesused8505-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152670-used-8505-100-ombi-model-frt10-boston-link-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/312679610d0e37315c0b2e6e78d135bc/original-b-l-002-e1375703392254.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1357fb825a85e78d78280ccb4b17fa9/original-b-link-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d79f47ee81fb10b14f501ae51c09928f/original-b-link-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc7e9b998081f70b1258b6bbbc792adb/original-b-link-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee7f0794535b44a11649f3f6645ebe91/original-b-link-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6ba22baadec0a5200b80d51237cf41d/original-b-l-002-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3606e8774b1c4b7ced8f9bbfcb4cc94/original-b-l-003-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47ecb3d8e0939c4ad2336463788adb14/original-b-l-004-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae4b858551edb922d4a9df42257665b5/original-b-l-005-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ee8e2b48c6424482e7421637f1ae054/original-b-l-006-1024x768.jpg2024-09-25 15:42:51 UTC6152671220V/1PH/50-60HZ S/n 79/183 Equipped With: Factory Stand Push button controls Air needle Spool holderChain Making/ManufacturingChain Making Machinesused1880-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152671-used-1880-100-ombi-model-gplu-double-curb-chain-making-machine-s-n-79-18318" x 21" x 50" high250 lbs.0,70mm0,20mm120/280 RPMhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4723634b49df46b9b75e17d1c2c53afe/original-0141-e1447258312640.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fb350495b8db28508ebc452e54d8899/original-0142-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13e05f3dbe37bd58367893c53eb68ac5/original-0151-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8ad26e07cca5b06ac421670aca041bf/original-0161-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ec57baa2e608aab1db4f5c6b22a9e1f/original-0171-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/297d09a332dd46174a310784e303e254/original-0181-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b34b96e7bd111e9217be390343d6524/original-0191-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a140c607c4feabdecec191ec0ca4887/original-0201-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57adc6bc711227f6829c1840557760fd/original-0211-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e5d10a0756adabf5c42cdb9e70198d6/original-0231-768x1024.jpg2024-09-25 15:42:51 UTC6152672220v / 3 PhaseChain Making/ManufacturingChain Making Machinesused8516-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152672-used-8516-100-ombi-model-ftr-boston-link-chain-machine1,30mm x 0,30mm100 Links/min31" x 19" x 24" hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/993df331494cc1223846bf4af8c17cf5/original-8516-001-e1375296623918.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44d60d032a3d2efc45ebbf6459b88991/original-8516-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/012463f9dc7e61c3c1f7b0850c1f4f8e/original-8516-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/310679590cc4275ebe16b1f6bc5ddfe3/original-8516-006-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0579108205074ceb86bc8d151c05ba60/original-8516-007-1024x768.jpg2024-09-25 15:42:49 UTC6152673Circa 1870 - MFG. by Blundell & Co., Providence, Rhode Island, USA Hand Operated Anvil Base Design: Wood Mounted to original floor mounted Granite Block - taken from the building to preserve the integrity of the wood base and as a piece of American History. Estimated weight 1950 LBS Equipped With: Leather / Rope Strap & Foot Stirrup Original Wood Block Base Mounted to a Granite Base (4) Die Positioning / Locking Bolts Hammer "Up" Position Lock Male striking piece attached to ram Striking die as photographed c.1896 RARE VINTAGE EMBLEMATIC JEWERY NO. 52 BY HARVEY & OTIS CATALOG BOOK https://www.worthpoint.com/worthopedia/vintage-emblematic-jewery-52-harvey-1795574110 HARVEY & OTIS PATRIOTIC PINS & DISPLAY USA AMERICAN FLAG EMBLEMATIC NOS VINTAGEAntique Machinery & ToolsMiscellaneous Antiquesused5350-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152673-used-5350-385-antique-rare-foot-drop-hammer-press-circa-1890-mfg-by-blundell-co50lbs. Approx.2" Diameter4" x 4"5 - 1/4"15" MaxCast Iron with 4-Die Positioning BoltsRemoved from Harvey & Otis (46 Chestnut St. Providence RI)15" x 20" x 80" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68fb07fc86dd5f3bd9c14972d6a3e6ff/original-5350.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd02a29795872070c85fc04870b989da/original-IMG_0926.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e809638bdbdb07bef2e0059d0ae0a384/original-IMG_0927.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edd83370a1783a48bde5791840c30f08/original-IMG_0928.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74fd7d23157b919e1e71545721613e17/original-IMG_0929.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58823ffedc3d43d55e3d9c34960391b5/original-IMG_0930.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e40458e20f42c79df84a249742c430f6/original-IMG_0931.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a15d438582a8a151204b0b711e6cc18/original-IMG_0932.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6028325a3b359edc867f9d3012d76311/original-IMG_0934.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/408bcc98b7508d19ef11efa451bb4426/original-IMG_0935.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56610d00c7c043afc3380109495063f7/original-IMG_0936.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/367d83601e8a5c95b95649c983263913/original-IMG_0937.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59eb2e46da5ea208ddf0206ac73b99b9/original-IMG_0939.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3fd79a455719dc91bf13d54a8df9a911/original-IMG_0940.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9838c80b78e81623b2e852e2bf566685/original-IMG_0942.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f47dbddebc43b545c12b1a6c2f843fe1/original-IMG_0943.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9771dd31723ce597fc76313af72023ad/original-IMG_0944.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb7b0b8074b73e98997f97d058e350d0/original-IMG_0946.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be73138369628492d70ea75bd52b4797/original-IMG_0947.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11515060856026d9a9943ebffa5ec0ed/original-s-l1600-682x1024.jpg2024-09-25 15:42:57 UTC6152674Serial#11131167 NEW 1967 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7057-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152674-used-7057-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f63c00020029ff3cf967bfc13db409c1/original-7057.jpg2024-09-25 15:42:47 UTC6152675Serial# 1147 NEW 1963 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7053-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152675-used-7053-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dbfafdfdf120c943528df145014e859/original-7053.jpg2024-09-25 15:42:47 UTC6152676BENCH MODEL * LESS MOTOR * LESS TURNTABLEChain Making/ManufacturingChain Making Machinesused8614-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152676-used-8614-100-nickerson-type-cable-chain-making-machineSINGLE CABLE.040".006"18" X 15" X 17"Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa1d346dde7f0ed08900d13c0f87662f/original-8614.jpg2024-09-25 15:42:47 UTC6152678Serial#7128967 NEW 1967 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7056-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152678-used-7056-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b892a48655fae18726ead52711a7543b/original-7056.jpg2024-09-25 15:42:47 UTC6152679Serial#1143 NEW 1963 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7054-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152679-used-7054-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df81cfd81396f8b1f6bcf4b541af12ce/original-7054.jpg2024-09-25 15:42:47 UTC6152680220-380V/3PH Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused9986-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152680-used-9986-100-small-bechtold-curb-chain-making-machine-s-n-114621" x 14" x 17" high140 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6d3dd2c9ed9d994f858d93bf7c61100c/original-9986.jpg2024-09-25 15:42:47 UTC6152681NEW 1967 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7055-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152681-used-7055-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d114af43cfca477c3560cfacef598c05/original-7055.jpg2024-09-25 15:42:47 UTC6152682Serial#1145 NEW 1963 Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused7052-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152682-used-7052-100-small-theodore-bechtold-germany-curb-chain-making-machine380 Volts 50 Cycle21” W X 14” Deep X 17” High140 # LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64272a2e4c4d6d62bb42e2cdd325d9ac/original-7052.jpg2024-09-25 15:42:47 UTC6152683220-380V/3PH Bench model Wire Size Approx. 0,18 mm to 0,60 mmChain Making/ManufacturingChain Making Machinesused8708-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152683-used-8708-100-small-bechtold-curb-chain-making-machinesingle curbhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b85353afb63aaac2df1c9833a4f1d885/original-8708.jpg2024-09-25 15:42:47 UTC6152684380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5855-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152684-used-5855-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a34621a592cc805ac62c881954acafd2/original-5855.jpg2024-09-25 15:42:48 UTC6152685380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5858-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152685-used-5858-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe538b608dfb703effe34afa0d3cbbcf/original-5858.jpg2024-09-25 15:42:48 UTC6152686Bench model *Less motor Equipped With: TurntableChain Making/ManufacturingChain Making Machinesused8725-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152686-used-8725-used-hitchcock-double-cable-chain-making-machine.018", double cable22" x 12" x 19" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/894a02b5d2db1b3f9ae7065031b01cd9/original-8725.jpg2024-09-25 15:42:48 UTC6152687Bench model Equipped With: Turntable *Less motorChain Making/ManufacturingChain Making Machinesused8727-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152687-used-8727-used-ruf-type-double-cable-chain-making-machine.0275" double cable22" x l2" x l9" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4408765f767fb71b4a8c09dd694ecd78/original-8727.jpg2024-09-25 15:42:48 UTC6152688380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5856-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152688-used-5856-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac7131069daa2a3251519d9d72bf365/original-5856.jpg2024-09-25 15:42:48 UTC6152689Wire, Plate & TubeRolling Mills, Powerused7776-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152689-used-7776-150-set-4-x-6-chrome-plated-rolling-mill-rolls4"6"15-3/4"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79668cc55fa2f85274ee91d6788be8f9/original-7776.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a64e7b3e946a610ecd832fe277c40c5/original-IMG_6233-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/922748532565e54bd182e3cd136fa111/original-IMG_6232-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f4b146f38097b1e532fa996bf637aeed/original-IMG_6231-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6ca54e26fb35344867ba2963c6735cf/original-IMG_6230-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27f6ed00aed9c07cb98614674c47362f/original-IMG_6225-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a4a8bc91d237c199133545459dfc32a/original-IMG_6227-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/82bc902e3300d0fa661294f3442d3292/original-IMG_6229-1024x768.jpg2024-09-25 15:42:51 UTC6152690380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5853-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152690-used-5853-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c57d7f4d57adbfc676a9b14876284aa7/original-5853.jpg2024-09-25 15:42:48 UTC6152691380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5854-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152691-used-5854-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93bd82ecaeb8cee47d93c0322bfbffaf/original-5854.jpg2024-09-25 15:42:48 UTC6152692380V/3PH/50HZ Tooled for medium size single cable chain Equipped With: Turntable Factory standChain Making/ManufacturingChain Making Machinesused5857-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152692-used-5857-100-fico-type-curb-style-cable-chain-making-machine22" x 16" x 49" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76c9b6eaa170ff3a3dd30ba0579f5e53/original-5857.jpg2024-09-25 15:42:48 UTC6152693Rolling Machine for Mesh Bench Model Less MotorWire, Plate & TubeRolling Mills, Powerused9115-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152693-used-9115-used-rolling-machine-for-mesh-benchhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25033dad42a764a1f96dcc415b1866a5/original-9115.jpg2024-09-25 15:42:48 UTC6152694Optional -Professional Regrinding Services AvailableWire, Plate & TubeRolling Mills, Powerused7788-150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152694-used-7788-150-standard-machinery-co-5-x-8-set-of-rolling-mill-rolls-for-standard-mchy-co-5-x8-power-rolling-mills5"8"25-3/4"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0710adb5298e0f9510fcf3a57f46b7a0/original-7788.jpg2024-09-25 15:42:48 UTC61526952083ph60hz maximum flask size: 6-12 diameter 9" depth Overall size 20-20-56"height estimated weight 600lbs Equipped With: Built-in vacuum pump Digit controls 4" flask adapter Pneumatic flask chamber lift start/stop/emergency stop controlsGeneral Jewelry MachineryCasting Machines & Equipmentused7643-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152695-used-7643-310-erschem-model-jv-12-vacuum-casting-machine-for-jewelry-similar-applications8014https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c562afb493ace15bd67ee85605bca235/original-Erschem-7643-310-002-e1345032580140.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab0f8d88f14ad271f2b2725e73c4b8e5/original-Erschem-7643-310-0021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e18602c85b1aad53f6694c87d4b7c2c/original-Erschem-7643-310-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a85687d56c5f8247a5e1782e3d812a8/original-Erschem-7643-310-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c0cecc49e3dcbdf053942e9e896b438/original-Erschem-7643-310-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/468a1a0b07ae697163f1a17804e1e8af/original-Erschem-7643-310-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7360eac5fef37ef3ec66c181220ea996/original-Erschem-7643-310-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6183219b550e1f246e3e38b00c1a5bd8/original-Erschem-7643-310-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8f989f7608a137ccdd1381db3885382/original-Erschem-7643-310-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/beac12edbd4ce6f3aaae756057a446b6/original-Erschem-7643-310-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4c65ab23ec86869e85e1615d9fd83ed/original-Erschem-7643-310-011.jpg2024-09-25 15:42:58 UTC615269611696.0Tilting system 90° to follow the division line on the "hollow" wire. Temporized recirculation lubrication with reclaiming and filtering system. The rollers are laterally contained through grinded plates with centesimal tolerance. Rapid replacement of the rollers moving the shafts. Control from panel or through foot-pedal. Speed 47 r.p.m. installed horse power 0.75 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 650 mm Width 450 mm Height 1300 mm Approx.Weight 150 kg Availability: Ex-Factory, Italy Check the latest exchange rateWire, Plate & TubeRolling Mills, PowernewPawtucket, RIhttps://www.goldmachinery.com/listings/6152696-new-tvn-mod-ls-rolling-mill-for-flatting-wire-with-interchangeable-rollershttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9888b4a0ec691c7b6eae3ea484484989/original-ls.jpg2024-09-25 15:42:48 UTC61526979799.0Voltage requirements 220 /3ph / 50-60 cycle Consisting of two Rolling Mills for Shaping & Forming W/ Stanchions, forming Heads & Winding machines. Including all related tooling & accessories in original steal cabinet - everything required to start producing Gooseneck Cobra Jewelery products Also includes all original factory motor drive assembly /pulley system's & drive belts complete! Sample product photos & original brochures attached.For Production of Stretch Belts, Fashion Neckchains, Bracelets, Hat Bands, Earrings, etc. We have finished stock inventory in Gold Plated and Silver Plated here at Gold International Machinery along with original catalog sheets showing the various products made. - Estimated shipping (1) Crates 60" x 42" x 50h - (4) crates @ 42" x 42" x 50" - Estimated shipping weight 8500 LBSChain Making/ManufacturingChain Making Machinesused8674-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152697-used-gooseneck-cobra-fashion-jewelry-manufacturing-packagehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5509bd765b50b6c2d854429dab74f6d/original-Goose_Neck.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52e1daa8d133d7bc9cbcf61678775b66/original-1-4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7b2e5a921e368287fa35b9d609af245/original-2-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c31b88f1d8ed5a7db8dde2d5fb0699bf/original-3-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b0a18f4bc5af83a64cc58b98343c9f9/original-4-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff9f0d006771ad6c56d72c398e5e7888/original-5-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2969d49223dad3104bfd1b47a4f8c6c/original-IMG_0419.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3aa5398e4330ffe55c737818f23e9438/original-IMG_0420.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42bfd1d5d18faa82c671d1ac445b9020/original-IMG_0421.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fed732145f053b16bed8fdd65d7d0a9/original-IMG_0422.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1136093850acf9aeb07d128d72fc5bc9/original-IMG_0423.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92156a33f4ba98e9010a2e3f361223b8/original-IMG_0424-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a90f3908e4f493dbc8e83294d50d77c/original-IMG_0425.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aacde994e67e577cd68439f24a7983ec/original-IMG_0426.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf4d10a8c26fc42ff490d086b1df0819/original-IMG_0427.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3955650399f2b9562e008bbdbd74ba4/original-IMG_0428.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0a13efc46b6b5a1df2011eb132c35fda/original-IMG_0429.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/693e3a96398676e2cd7ca86e40967882/original-IMG_0430.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f531c66c00b5263fecfa662dc87f4f8/original-IMG_0431.jpg2024-11-06 15:19:28 UTC6152698General Jewelry MachineryCasting Machines & Equipmentused7484-185Pawtucket, RIhttps://www.goldmachinery.com/listings/6152698-used-7484-185-209-graphite-melting-crucibles-12-kg-capacity12 kg.3-1/2" diameter7"4-1/2" x 4-1/2" x 7-1/2"10 lbs.$ 120.- EACH$59.99 EACHhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e08cd88f1c444e9a928ddf2a6e21f7d/original-209-001-e1360940528936.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de823483ec9be58f9d340386c728d24a/original-209-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f221651eea0441e70775ba8240ed213/original-209-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7778added0370e00ff5dccc7fd0d4e4/original-209-0011.jpg2024-09-25 15:42:51 UTC61526990220V/1PH/60HZ Serial No. 42 3-Post style For 9" & 12" molds Equipped With: Hand operated hydraulic press Dual temperature controls, analog type Analog timerGeneral Jewelry MachineryCasting Machines & Equipmentused7478-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152699-used-conley-vulcanizer-press-model-14-for-9-12-molds12" Round13"21" x 22" x 36" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dec5a1748f87e47363c6c28047f59585/original-volc-002-e1362691429668.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/439a276b9bdd02cd032517f959420ab9/original-volc-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b792ab39edee0a2f665cbd1bd3874dc/original-volc-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45a6f9e5f839ef185fe3a74e65c64fdd/original-volc-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/532f00f4444bf2fcdce7b8573af1218d/original-volc-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45d52c230ac661018316569cfbf27578/original-volc-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d21a4046ec51b4fbe641be0946562d9/original-volc-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/573bdc7bdb747e7e993d1762986bb2d6/original-volc-002.jpg2024-11-11 19:19:06 UTC6152700110V/1PH/60HZ Equipped With: Variable speed drive Stainless steel bowlGeneral Jewelry MachineryCasting Machines & Equipmentused7156-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152700-used-7156-310-univex-bench-model-m20-planetary-mixer-s-n-4151020 quart20" x 28" x 35" high1/2 HPhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3eaaebaf26bd339a70224d228c9dfd8e/original-7156.jpg2024-09-25 15:42:51 UTC6152701Flask Prices: Price Break: 30 Flasks @ $30/ea 50 Flasks or More @ $25/ea Shipping and handling charges are additional based on order size and shipping weight.General Jewelry MachineryCasting Machines & Equipmentused6039-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152701-used-6039-4-x-9-lost-wax-perforated-casting-flasks4" diameter x 8.5" highHeavy duty welded steel10 Flasks @ $35/eahttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ac35f41a25854cb5a92b7d892b099e8/original-6039.jpg2024-09-25 15:42:52 UTC6152702110V/1PH/60HZ Equipped With: Cycle timer Speed control 20 quart stainless steel bowl Mixing paddle Adjustable bowl heightGeneral Jewelry MachineryCasting Machines & Equipmentused8396-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152702-used-8396-310-univex-model-m-20-20-quart-mixer-s-n-4285920 quarts4 speed, 1/2 HP27" x 16" x 33" high280 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aad3a6bff1e89824507fc694a15ec7f9/original-8396.jpg2024-09-25 15:42:51 UTC6152703220V/1PH/60HZ Note: set up for 12" molds Equipped With: Mold pressure setting gauge Cycle timer Forward reverse Emergency stopGeneral Jewelry MachineryCasting Machines & Equipmentused8373-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152703-used-8373-310-frank-pertot-model-cm-fl-18-centrifugal-casting-machine-for-white-metal-s-n-fl-006118"32" x 28" x 45" high550 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f0f65393f7883e6225d7a3b6a424167/original-8373.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a1aa37c58163f8294db098f8ac3df66/original-0051.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f61d6a2df049928555bde120d2ccba02/original-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/347f0f6c681bb89f5ffdecdfc3348856/original-8373t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd44828dddfc5ecc1c643cace86916f8/original-8373-001-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffcf46bd3071b2743e337f44d0531f28/original-8373-002-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ce9cb315498785ae26d91a373dfd50e/original-8373-003-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45075de20f07395a9165fb2e07d972c6/original-8373-004-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6c3d969634ff394a9205c301a10518e4/original-8373-005-768x1024.jpg2024-09-25 15:42:55 UTC6152704115V/1PH/60HZ AIR PRESSURE WAX INJECTOR Equipped With: WAX INJECTING NOZZLE WAX SPIGOT TEMPERATURE CONTROL ON/OFF CONTROL PRESSURE REGULATORGeneral Jewelry MachineryCasting Machines & Equipmentused8270-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152704-used-8270-310-arbe-wax-injectors-air-pressure-type-model-2012 3/4 QT250 DEGREES F10" DIAMETER X 15" HIGH27 LBShttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd93d1b925ee2d6ab1765d7f97ce9be9/original-8270.jpg2024-09-25 15:42:52 UTC61527058946.0The machine is essential for the lost wax casting process of precious metal articles. The considerable capacity of under vacuum tank permits to obtain a very good cylinders filling during the casting operation. Cylinder max diam. 200 mm, height 300 mm. Vacuum pump 30 cubic meters per hour. Installed horse power 1.1 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 790 mm Width 760 mm Height 860 mm Approx.Weight 250 kg Availability: Ex-Factory, Italy Check the latest exchange rateGeneral Jewelry MachineryCasting Machines & EquipmentnewvcmPawtucket, RIhttps://www.goldmachinery.com/listings/6152705-new-tvn-mod-vcm-plant-for-the-static-casting-in-vacuumhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aedb911f16d8192e0ef238c50d411b91/original-vcm.jpg2024-09-25 15:42:52 UTC6152706110V/1PH/60HZ 5 - speeds 5 QUART Max watts 275 Equipped With: Whisk, Paddle, Hook & BowlGeneral Jewelry MachineryCasting Machines & Equipmentused8050-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152706-used-8050-310-kitchenaid-model-classic-plus-bench-top-mixer13" x 7-1/2" x 14" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/158adbc04bed0959dfd1765a18eed0a6/original-8050.jpg2024-09-25 15:42:52 UTC61527079074.0The machine will allow you, thanks to the possibility to keep under control the parameters of the working cycle, to obtain a constant and high quality of the plaster moulds eliminating completely the air pockets caused by the gas. Rotating pump with high vacuum and a prefiltrating system in suction Vacuum bell in transparent plastic, inside diam. 380 mm, useful height 380 mm. Adjustable vibrating system on cylinder-plate to allow the expulsion of the air bubbbles from the cavity. Installed horse power 0.8 KW. Power supply 380 V. 50 HZ, Three-phase. Dimensions: Length 820 mm Width 600 mm Height 1300 mm Approx.Weight 250 kg Availability: Ex-Factory, ItalyGeneral Jewelry MachineryCasting Machines & EquipmentnewsovPawtucket, RIhttps://www.goldmachinery.com/listings/6152707-new-tvn-mod-sov-under-vacuum-plant-with-bell-for-degassing-molding-plasterhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/702e906ee3c278faac2b3fd467e3f058/original-sov.jpg2024-09-25 15:42:52 UTC61527080Scroll Down To See Video! Automatic vulcanizer with heated Upper deck for the production of dies and molds in silicon rubber. This machine features an upper deck heated by electric resistances and digital temperature regulators that control the vulcanization temperature. The road containing the mold to vulcanize is pressurized by means of a hydraulic assembly with electric pump. A timer enables to program the vulcanization cycle It can vulcanize molds up to 400 mm Technical Specs: 220V/3PH/60HZ Equipped With: Heated upper platen Manual/Automatic controls Cycle timer Temperature control Less back panel & coverGeneral Jewelry MachineryCasting Machines & Equipmentused8374-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6152708-used-nicem-matic-model-p-400-rubber-mold-vulcanizer-s-n-450016" x 16"28" x 32" x 48" High36" x 40" x 57" High1300 Lbs.36" x 40" x 55" High1100 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbd31726621124fca5b827729e9b10b9/original-8374.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0ab16e7075765ba5038a36abd62e2ac/original-IMG_7508-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/523164090807c05d371890f4f6866727/original-IMG_7509-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8360c884c687dd862a8d905c51d80086/original-IMG_7510-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/01028c3a7adefb1f160c62d8a6afc759/original-IMG_7513-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34aba13482284c5732d87f8f00d8de5d/original-IMG_7505-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/33a64d5a86a6e0da73b5a84639092a7e/original-IMG_7506-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea1fb9ec339d243b12ceb05f06741096/original-IMG_7507-1-768x1024.jpg2024-11-11 18:56:56 UTC6152710220-380V/3ph/50Hz Bench Model Manual Indexing Devices Equipped With: Tool setting microscope Two-position tool holder Bracelet holding attachmentGeneral Jewelry MachineryDiamond Faceting Machinesused3801-110Pawtucket, RIhttps://www.goldmachinery.com/listings/6152710-used-3801-110-moyas-single-head-diamond-faceting-cutting-machine-jewelry2810rpm3½"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d916535d486eb861c59194e147fa365/original-3801.jpg2024-09-25 15:42:52 UTC6152711Note: Less motorGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused8625-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152711-used-8625-100-industrial-jump-ring-making-machine2mm rings23" x 30" x 32" high600 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf2b9f7e30df764ab7f13998303b6467/original-domet-photos-010-e1344731999816.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f32782901f810257f1eaff1cb8152e58/original-domet-photos-0101.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aa407823664ffa967be805f75c46248b/original-domet-photos-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03c46cea932ff4d6b56e87ca4cfb6db8/original-domet-photos-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/879bc94cf99bef7f9a4df4ce84f5a6de/original-domet-photos-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e403dfe60de0c61c67bf101131fed0d/original-domet-photos-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/823b7393abb4cf3a615172a9328f4341/original-domet-photos-015.jpg2024-11-06 13:44:07 UTC6152712Rings Bench Model 220-380V/3phase/60Hz Equipped With: Horizontal Spindle 2 Gang Toolholder Powered Back Ground Attach- ment for Flat Rings Size: 23" x 26" x 27"h Less ScopeGeneral Jewelry MachineryDiamond Faceting Machinesused0713Pawtucket, RIhttps://www.goldmachinery.com/listings/6152712-used-0713-used-tousdiamants-model-t4-diam-cutting-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffc2a9e6c4e73db755b8f4f6f3ac9981/original-0713.jpg2024-09-25 15:42:52 UTC6152713Set Up for Flat Stock Reel To Reel Stand Mounted 220V/3hp Vertical Head U.S. Vari-speed Drive for Feed Rolls Air Operated Head & TableGeneral Jewelry MachineryDiamond Faceting Machinesused2336Pawtucket, RIhttps://www.goldmachinery.com/listings/6152713-used-2336-used-tousdiamants-type-t2b-diamond-faceting-cutting-machine-jewelryhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdf7b6408f300d95b0acf9c38dc149d8/original-2336.jpg2024-09-25 15:42:52 UTC6152714Work rackGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused7339-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152714-used-7339-400-plastic-self-contained-bench-model-work-enclosure18" x 16" x 32" high5-1/2" diameter16" x 8"27" x 24" x 33" high40 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bea9dbe5059b69848a342b676f11980/original-a-017-e1384780738854.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80dd954a4bf8cf60c3832abefdc05928/original-a-0171.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87d594027ae99d66c1aba62769daa79d/original-a-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/836e47ef23ad92f3bb1ea06b5da1059c/original-a-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51bdde3d9e8b8e6de2e90ebe8c3b2064/original-a-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a5650fc1d561e63deff2ed67bcd2fb9/original-a-016.jpg2024-09-25 15:42:54 UTC6152715Sharpening machine equipped with diamond wheel and because of its wheel-collet chuck in synthetic resin is exempt from any vibration in its drive devices. Tiltable Table: 200x110, (15°) 50Hz/3-phase. Equipped With: Diamond wheel, lamp.General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused3182Pawtucket, RIhttps://www.goldmachinery.com/listings/6152715-used-3182-new-orogold-sharpening-machine-for-circular-saws-knives-etc45 x 25 x 25cm77lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/535b95af7273940329488492dfedaf0e/original-3182.jpg2024-09-25 15:42:53 UTC6152716Brand New Line of Hand Operated Shears was just introduced by Durston Manufacturing, which is the same company located in England that have been making the finest Hand and Power Rolling Mills for many years. We feel that the quality of construction and the low price make this New Heavy Duty Shear a great buy. Technical Specs: Equipped with: Adjustable back stop with Adjustable Ruler Precision Ground, Hardened and Tempered Blade Open Back to allow any length of sheet Extra Long Pulling BarGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsnew300mmGuillotineShearPawtucket, RIhttps://www.goldmachinery.com/listings/6152716-new-durston-goldpro-12-heavy-duty-hand-operated-guillotine-shear.079" (2.0mm) Mild Steel .140"(3.5mm) Non-Ferrous Metals470mm x 210mm (16" x 8-1/4")625mm x 470mm(24.5" x 16")52 kg(114 lbs.)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd2a578bf5797aac76d71ca75caf2a33/original-5022-400_0.jpg2025-02-19 15:43:07 UTC6152717Set up as jeweler's saw 110v/1ph/60hz Equipped With: Cross Slide Self-Centering Vise Tailstock.General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused5522Pawtucket, RIhttps://www.goldmachinery.com/listings/6152717-used-5522-used-bosworth-bench-top-lathe11"13"36" x 12" x 20" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c41a1ec29fd22a6532d5d0d518daa01d/original-5522.jpg2024-09-25 15:42:53 UTC6152718General Jewelry MachineryMiscellaneous Tools & Diesused0658-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152718-used-0658-390-die-set-to-make-large-religious-cross1-1/2" x 1"9" x 7-1/2"30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fe0390893e5776e2539afa5ea532bb5/original-large-cross-main1-e1401968201310.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/558b710851026e5d959c08f53b08bc8e/original-large-cross-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7234e5e3c0b93dcc78f3d0e3103abc24/original-large-cross-main2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/132664ab86f7b81bb34f7c402bcbdc89/original-large-cross-1.jpg2024-09-25 15:42:55 UTC6152719115V/1PH/60HZ Equipped With: Digital displayGeneral Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused8001-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152719-used-8001-400-model-c-2200-digital-counting-scale12" x 14"6" x 6"30" x 15" x 24"10/1, 20/1, 50/1, 100/1https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c63cb9440653d1156a63f342e7a127fc/original-8001.jpg2024-09-25 15:42:53 UTC6152720General Jewelry MachineryMiscellaneous Tools & Diesused0656-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152720-used-0656-390-die-set-to-make-creole-14-product-for-earrings10-1/2" x 6"40 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef038feae4f6ad55d0b87f1a07f62475/original-creole-3-main-e1401967789764.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aff9ad03d2d9d23f3763579c1e38552f/original-creole-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bfb931edaf7cc32ec302c1e7a819ee1/original-creole-3-main1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a61a4e511464ae4638b0a0c27fa06534/original-creole-11.jpg2024-09-25 15:42:56 UTC61527212 VERTICAL GLASS ENCLOSED JEWELRY DISPLAY CASES (2) HORIZONTAL GLASS ENCLOSED JEWELRY DISPLAY CASE Additional Photos:General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused8151-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152721-used-8151-400-1-package-4-glass-enclosed-jewelry-display-cases75" WIDE X 22" DEEP X 35" HIGH74" WIDE X 18" DEEP X 8" HIGHhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8249063acb9dbcb44b760687d81cc9ee/original-8151.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5df2f8b6b83b58b6847f835fbb46722c/original-8151-2.jpg2024-09-25 15:42:53 UTC6152722General Jewelry MachineryMiscellaneous Tools & Diesused0657-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152722-used-0657-390-die-set-to-make-small-religious-cross3/4" x 1/2"9" x 8"30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa25681df35c9cdbed69184519d3a3d2/original-small-cross-3-main-e1401968034876.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/115918240e31a17981e3cbb65649243d/original-small-cross-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06e2a3bfddaa215dd27b15f499579f2b/original-small-cross-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27f26358939fcd24eaebfc2340eb5fa2/original-small-cross-3-main1.jpg2024-09-25 15:42:55 UTC6152723#1 BP5658 Padlock fount, pitch 1.440 #2 Padlock blanking N. 30 SP012 size: 6" x 4" x 5", estimated weight: 20 lbs. #3 Padlock back, .440 pitch #4 Packlock marking cutout of pendantGeneral Jewelry MachineryMiscellaneous Tools & Diesused7458-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152723-used-7458-390-jewelry-padlock-product-die-making-system-4-die-sets10" x 10" x 10" high55 lbs.10 lbs.5" x 3" x 5" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dac48e7ffb121d270d234ffcdb62f229/original-7458-001-e1354107645993.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c0a138f73f5a829492bbce39ab8d821/original-7458-0011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39bf5f807f60b1d6d941aacc625d4973/original-7458-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08fbd767f637f0e0021a9f16478b9f44/original-7458-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2191a1c6f1a5c8e459fe0e82dcd1e332/original-7458-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0a99ad440309f99442182aa6be1282c/original-7458-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe5ef1da0019552eea116f718524ccc9/original-7458-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f53215a725ac23247cc4523ed8491c0b/original-7458-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ddd72ae15c6e19955d1b8141b8c84780/original-7458-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/44e10a406ffeefe446a5f9ada5dba766/original-7458-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4233cbb4d6a554c699ae3345ac46e965/original-7458-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5f44ccacca1f9d55cd5c63e361048c8/original-7458-016.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/07fc99234343c0820be4ac7347427d87/original-7458-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd71a95ec377e4951941873fe7f3038c/original-7458-018.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6c75003d36fdeee86013977253722e8/original-7458-020.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a3f40ba5c44d19efaeebef8ce232535/original-7458-021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e7b54a249c49964eb41562134952f06/original-7458-022.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf181d7394ee2c0b35fc0b0de391bf6e/original-7458-023.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afb9c73da160cc2b2a64100f4ba7add1/original-7458-024.jpg2024-09-25 15:43:08 UTC6152724This die set is made up of 2 -hearts 1 - 7/8"(l) x 5/8" thick 1 - 3/4"(l) x 1/2" thick .General Jewelry MachineryMiscellaneous Tools & Diesused7459-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152724-used-7459-390-die-set-2-set-of-hearts8" x 5-1/2" x 7" high30 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6b7c4990952817f3d9a8c12bb0a477d/original-007-e1352298707377.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/162f8a76ed74bca69c3d2cabbaac6af1/original-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bef241ce111a7618d6a42a2c598739d/original-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f525648774991692a79e4c65b9ef2bb1/original-0071.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ea1535457bf732ddeb9ff451103bc79/original-008.jpg2024-09-25 15:42:59 UTC6152725This die set makes a cloud blank for a baby bangle tool pitch .1185 .General Jewelry MachineryMiscellaneous Tools & Diesused7402-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152725-used-7402-390-die-set-cloud-blank-for-a-baby-bangle-tool-pitch8" x 6" x 8" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a24549d9c72d49d51917d28ddfc86b58/original-baby-003-e1354106920644.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a3068cba97a61961db35e3c021932342/original-baby-0031.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bc439f086095426f671cdd7f0543583/original-baby-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b040a4e0981edcd1c43af6fb855d1b0/original-baby-007.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/393b09d3abe24baf20dbf781fdaf213f/original-baby-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc0356c10e34a50248c59bfb038b990d/original-baby-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4ed95af5b107ffe29c2a1154bc70cab/original-baby-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2af6f16d5184c69d79088e6bdeb3d430/original-baby-013.jpg2024-09-25 15:42:59 UTC61527261982245-420V/3PH/50HZ Equipped With: Air pressure regulator Speed control On/Off switch Top and bottom riveting tools Hand crank Additional Photos:General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused8579-400Pawtucket, RIhttps://www.goldmachinery.com/listings/6152726-used-8579-400-jauch-pin-inserter-spin-rivet-riveting-machine-model-tn1e2-s-n-19828", 3/4" trough1/8" -(estimated)6" x 6"1400 RPM7" x 14" x 23" high80 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91562d911177c0b057d5b44f84eebec2/original-85791.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c37399a7f7bed3e4ce2fb313d75d3228/original-8579_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b1b11cdc771736834ec0cc93bef97d4/original-8579_3.jpg2024-09-25 15:42:53 UTC6152727This die set makes (5) sizes of a cut out star, prog. Tool .945 pitch .General Jewelry MachineryMiscellaneous Tools & Diesused7403-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152727-used-7403-390-die-set-5-sizes-star-design10" x 10" x 10" high50 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9865c2f926d68104749c450a9b67300a/original-5-star-001-e1354107233852.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6b2bfa308da3f161c4a03808e8bb1d4/original-5-star-0011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/72a654ef90efa684539d5342da706043/original-5-star-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c44461cee6b2f2a2349bd1556f88b7d6/original-5-star-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9e88aef540ad263472cbb8ef3290d27/original-5-star-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebef29ca8ff288d7448a46c7c2d32ba7/original-5-star-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8aecdfd35a5f8d73057f5bdff13bc200/original-5-star-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/932be79e32ddbccc91126e9f009afff1/original-5-star-014.jpg2024-09-25 15:42:59 UTC6152728This die set makes a square pendant with "birth certificate" stamped in it, pitch .925 .General Jewelry MachineryMiscellaneous Tools & Diesused7399-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152728-used-7399-390-die-set-makes-a-squarependant-with-birth-certificate-stamp7" x 9" x 9" high40 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f14cd3f94bb7695fa967904c7dd82cf0/original-7399-006-e1351093330667.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a27c4f190133ba8786bd7b5509084b3/original-1-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2fbf6354ba60e7c4d62a77f35009f9b/original-1-002_1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7f266de53007f0391aeedb457d6159e/original-1-008.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7f26666507fdda04697e87b29b9c6e2/original-1-009.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0c9b57d31b1eadeff1877473fe3e6b0/original-7399-001.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/405da24d31f0506d8bb1e49355f4e04c/original-7399-002.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c91b0033460df21d8864c4e7ff50569/original-7399-003.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d0a081269ab186cc86fdc8e27f26a04b/original-7399-0061.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/efc404142142acc72e0ad8a0c405f379/original-7399-007.jpg2024-09-25 15:43:04 UTC6152729This die set makes across blank, 3/4" x 1" cross size .General Jewelry MachineryMiscellaneous Tools & Diesused7401-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152729-used-7401-390-die-set-for-3-4-x-1-cross-design7" x 8" x 10" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6082cd6130aabeae60b1efbd36ebf698/original-0111-e1354106567999.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/54d31920fcc86a903acbe8dac65c259c/original-0112.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef577d241e6d66a351b247fdc66fd15b/original-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/352c9e89729cb5ba1f8da18f84ab6e75/original-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93554375be6b58902329766b0b9f50cf/original-016.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04dc2d78f726a6817e81b7200ed271e8/original-017.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71fe8b4f37f8bf3f05a4051bcd45ecf9/original-020.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6505f3426eddd3a37297f17ec5e5ad4/original-021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b723cf6b5d0afadb8fde60fc8d8ac47/original-022.jpg2024-09-25 15:42:59 UTC6152730Multiply 1-50 Ratio Vintage Late 1800's All Original 30 Beam Length with Sample Pan & Product Pan Fine Adjustment Equipped With: Wood Base Cast Iron Leg StandAntique Machinery & ToolsAntique Scalesused1995-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152730-used-1995-fairbanks-counting-scale33 3/4" Long, 9 1/2" Wide, 26" Highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a175422b0ea3acea5002e6886d097ce8/original-1995.jpg2024-09-25 15:42:57 UTC6152731Bench Model Less Motor Equipped With: Wire StraightenerChain Making/ManufacturingChain Making Machinesused4699-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152731-used-4699-used-nickerson-type-cable-chain-machine19" x 14" x 18" highFrom .006" (0,15mm) to .040" (1mm)70 links / minutehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf3288c2b23d10c1ab1f1e812be994ac/original-4699-100.jpg2024-09-25 15:42:57 UTC6152732Tooled: .009 Double Cable (needs Arbor) Maximum Wire: .040" Minimum Wire: .006" Bench Model Size: 18" x 14" x 17"h Less Motor Equipped With: TurntableChain Making/ManufacturingChain Making Machinesused8704-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152732-used-8704-used-nickerson-type-double-cable-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/656bc355202e73cd260cc749ee5658ad/original-8704.jpg2024-09-25 15:42:57 UTC6152733Tooled for Rope Bench Model Less Motor Cap. To 0 90mm MCS Available Tooled for Single, Double or Triple Cable Chain MakingChain Making/ManufacturingChain Making Machinesused8046-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152733-used-8046-100-industrial-model-c-chain-machines-tooled-cable-chainhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03c8cf32f796f441069112b81b42feda/original-8046.jpg2024-09-25 15:42:57 UTC6152734Equipped With: SET OF WEIGHTS 2 - 50 GRAMS 2 - 3" DIAMETER PANSAntique Machinery & ToolsAntique Scalesused8280-385Pawtucket, RIhttps://www.goldmachinery.com/listings/6152734-used-8280-385-antique-henry-tromner-balance-weighing-bench-model-scale-01011" W x 5" D x 11" H1/2 OUNCEhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84d51e197a4f5e02950340948dc33d35/original-8280.jpg2024-09-25 15:42:57 UTC6152735Tooled .009 Single Cable, Bench Model, Less Motor, with Turntable, Size: 19" x 15" x 20"hChain Making/ManufacturingChain Making Machinesused8703-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152735-used-8703-used-nickerson-cable-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9e19578af092a50c744e3a3f63a287c/original-8703.jpg2024-09-25 15:42:57 UTC6152736Equipped With:Chain Making/ManufacturingChain Making Machinesused8791-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152736-used-8791-used-rico-double-cable-chain-machine0 28mm (.011) Double Cable Stand Mounted22" x 18" x 57"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83139b3246dad1ed4645c13e16f4371e/original-8791.jpg2024-09-25 15:42:59 UTC6152737Chain Making/ManufacturingChain Making Machinesused8644-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152737-used-8644-used-bracelet-chain-making-machine28 x 21" x 19"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a12a4440da1c1a57c9f57822c61f8ae/original-8644.jpg2024-09-25 15:42:57 UTC6152738Chain Making/ManufacturingChain Making Machinesused8604-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152738-used-8604-used-industrial-triple-cable-chain-machine20" x 15" x 16"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2a3d7a6564ef9fdcc37e3a7a7c93864/original-8604.jpg2024-09-25 15:42:57 UTC6152739This die set makes a heart pendant of St. Christopher, 1/2" x 1/2" stamped on two sides. .General Jewelry MachineryMiscellaneous Tools & Diesused7400-390Pawtucket, RIhttps://www.goldmachinery.com/listings/6152739-used-7400-390-misc-die-set-heart-pendant-of-st-christopher9" x 6" x 7-1/2" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1b35f5826ab6b19750e110df79bab6d/original-7400-002-e1354027313797.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/76774c5bc91904a45de84afe02183fb0/original-7400-0021.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7da95ad45a9fe6b568827b018a81f977/original-7400-004.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25aec19ef1fdabd871b0f606ed97a5aa/original-7400-005.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a40db477c2d5cb14ee86855e586be45d/original-7400-006.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab755547e936f953b04b5ccac0f408af/original-7400-010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e593213dc6b95e3ca5a4e5532bd6606/original-7400-011.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0501cdac94a84f97d0b21369d1d3420/original-7400-012.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ff73c06ee8d9bc7b13ec1e4650ba93d/original-7400-013.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8c6bceecc7da83f1b593fdd6534110e/original-7400-014.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db0791d2a323656820fb3ea634b353db/original-7400-015.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef4b22a1bf413ae1ab49499dcde6fd6f/original-7400-016.jpg2024-09-25 15:43:04 UTC6152740Tooled: 2.5mm (.100) Single Curb Bench Model Max Wire Size: 3.0mm (.120") Size: 35" x 21" x 19"h less MotorChain Making/ManufacturingChain Making Machinesused8611-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152740-used-8611-100-used-ruf-large-curb-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4347585ed24272c1c4dffc2f3a1c906b/original-8611.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b311d1bd2c311cfab16f31b856e5944f/original-c-008-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c687de58e4b581c9532f78b6bcc7fde2/original-c-009-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fb50ff09b784f8edeedd2e4a469e3e04/original-c-011-1024x768.jpg2024-09-25 15:43:01 UTC6152741Tooled for Non Solderable French Rope Chain MC, 3MM Bench Model Motor 220/380 V 3 Ph 60 Cycle Variable Speed Control W/Turntable, Wire Straightener, Electronic Chain & Wire SensorsChain Making/ManufacturingChain Making Machinesused4919-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152741-used-bechtold-bench-model-french-rope-chain-making-machine35" X 25" X 37"200#https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1b2c5100c9b063f721097ac5979e11a/original-4919.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8443e068bdb174cd08536944915fceb/original-103-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/219b35b310de95ec0db869b2ea19a01a/original-104-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a3390a413ee9160d38684c28e80a81d/original-105-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/873778f8e33830a8f290f42bbef4a175/original-106-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/233482d7341ce150ed25d6f247fb197f/original-108-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/658a700afbd0c90c014de8461d2b6855/original-109-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/742d5a4415034b042b4dd067b30b459c/original-110-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6be5ec617fa23b56a641e19480a6453/original-115-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a5cbea22aca4268d5911401ce980aa2/original-116-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4bd44d177d907c12e6825fae93f4677/original-117-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e2bd15d4eba77e97e3c1fcbc33944ee0/original-118-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df15012a2791d607c89c39f40a5a4d41/original-119-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0cbcd5144fec19b74e71e6b57cf26fb9/original-120-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4415bb525a002bf54699ee7bfc2ee8fb/original-121-1-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e0a850283f89cebe035cc8b5a018b7a/original-122-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12c320845c2a42fc3b21788d4737ebcc/original-123-1-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86a0cd15725715ccc5cc2fa19c0e18eb/original-124-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/513a83b1cf0ca96f469140bdcdb40aac/original-125-1024x768.jpg2025-04-09 15:27:07 UTC6152742Tooled Long Link Double Cable, Wire Size: .055 (1 4mm), Max Wire Size: .080" (2mm) Double Cable, Wire Feed for Making Chain From 2 Different Style Wires Of The Same Size, Bench Model, Less Motor, Less Turntable, Size: 26" x 21" x 26"hChain Making/ManufacturingChain Making Machinesused8771-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152742-used-8771-used-bechtold-double-cable-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/09f5cd0678c0f549578a940e9d949ce5/original-8771.jpg2024-09-25 15:42:58 UTC6152743Tooled: Single Curb, Max Wire Size: 0,40mm, Bench Model, Less Motor, Size: 14 x 10" x 9"hChain Making/ManufacturingChain Making Machinesused8754-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152743-used-8754-used-ruf-size-b-curb-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26083ab3e8af729ab93aba3cfb08934b/original-8754.jpg2024-09-25 15:42:59 UTC6152744Motor driven model on metal stand complete with motoreductor and electrical apparatus. Suitable for the use of flat wire up to 0.08" x 0.04" with links of 0.16" Technical Specs: Tooled 1.05mm Stand Mounted 220V/3phase/50/60Hz Pulley driven model Sample Chain: Notes: Configuration and Instruction Info (.PDF, 188KB) Original Fasti Schematic and Manual are includedChain Making/ManufacturingChain Making Machinesused7185-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152744-used-fasti-model-ev-married-link-venetian-chain-machine0.38mm x 0.88mm100 MARRIED links per minute25" x 18" x 21"183 lbs227 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6fcfb1f6b0be0f537b1abbc696273af0/original-7185.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3e6cfbe07ab221cb8ab2da9fc05c543/original-7185-sample.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8762756a73e4830dbe3ae9ce7b1601d1/original-IMG-7369-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0bd1dad1526ff91bbcd406bd82c64ac1/original-IMG-7370-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a55162f0d25ab72d9b9525d9a33eabc3/original-IMG-7372-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/241f66788e62cbc83603eea91e6a5770/original-IMG-7373-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/182db235cb4dab95620c51f5e87a3fa5/original-IMG-7374-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/769a1a613afd49bd5bc1a39e8d282a83/original-IMG-7375-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ed90a1e6729d4289f214606a33fee35/original-IMG-7376-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/629edc9f1e0fb010ca0cf5444022c912/original-IMG-7377-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d10d7422e35e469b5ee81235a030c712/original-7185-sample_th.jpg2025-04-09 19:48:17 UTC6152745Tooled Double Cable Bench Model Less Motor (needs Jaws & Jaw Holders)Chain Making/ManufacturingChain Making Machinesused8411-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152745-used-8411-100-rico-rope-chain-machine-tooled-double-cable22 x 10" x 21"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2352b8c217465c6d43818ae8c3ebfe62/original-1-8-e1537795052223.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b9d5e2e60b7e3c312745b8ece5417a40/original-1-2-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db1da9bcb19ddd973bea2acad962b4ce/original-IMG-8385-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f53bf2a053c0409921036c08179463e8/original-IMG-8386-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cea24b0c6716cdd759eeaeae1d552600/original-IMG-8387-768x1024.jpg2024-09-25 15:43:00 UTC6152746Chain Making/ManufacturingChain Making Machinesused8809-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152746-used-8809-used-fico-curb-chain-machine16" x 12" x 12"hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a48427e35cd23cc1036da7a7c6c50a5b/original-8809.jpg2024-09-25 15:42:59 UTC6152747Bench Model Additional Photos:Chain Making/ManufacturingChain Making Machinesused3191-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152747-used-3191-clover-large-curb-style-chain-machine-tooled-for-cable-chain.090" (2,28mm) Square Wire Cable.040" (1mm).150" (4mm)39" x 35" x 20"h. Less motor, less turntable.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/47dd34127e18f593a468eb27a3101472/original-3191a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a72c0ae3ba4a5f2f810ec18eaff29ca/original-3191-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/066f70723d1513bb4d6801034b682c65/original-3191-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52e754eb579da82971ab9b5e02f2c416/original-3191-3.jpg2024-09-25 15:42:59 UTC6152749Tooled for Cable Chain Small Bench Model Less MotorChain Making/ManufacturingChain Making Machinesused8249-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152749-used-8249-used-curb-chain-making-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ec72c7a6508f90227b480999c6d7ed2/original-8249.jpg2024-09-25 15:42:57 UTC6152750Bench ModelChain Making/ManufacturingChain Making Machinesused3214-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152750-used-3214-used-clover-double-parallel-curb-chain-machine.070" (1,77mm) Double Parallel.020" (0,50mm).120" (3mm)32" x 25" x 17"h. Less motor.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0c515cded84cf437184888678506b6e/original-3214.jpg2024-09-25 15:42:58 UTC6152753Tooled: .015 Wire, 6 Links/Inch, Stand Mounted, Vari Speed, DC Control Motor, with Turntable, with Extra Tooling, 20" x 22" x 56"Chain Making/ManufacturingChain Making Machinesused8719-100Pawtucket, RIhttps://www.goldmachinery.com/listings/6152753-used-8719-used-hitchcock-ruf-type-single-cable-chain-machinehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dcce200080abc09883f3fc4ddb65d0a/original-8719.jpg2024-09-25 15:42:59 UTC6152937220V/3PH/60HZ Equipped With: Die box Electronic speed control Additional Photos:Wire, Plate & TubeWire & Tube Makingused7693-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152937-used-7693-140-fenn-6-diameter-vertical-bull-block6" diameter x 10" long29" x 32" x 48" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7897cc89dbbd97ed24d9221c3f93f10b/original-7693.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc7a44257475e0557aa6c515c61e5105/original-7693-1.jpg2024-09-25 15:41:20 UTC6152938MdM Shaping Calandra Machine Motorized Shaping Unit for Producing Round and/or Oval Spiral Coils Overall size 30" x 22" x 53 "H Equipped With: Foot pedal Manual Coils in Various Diameters & Widths. They are then Saw Cut & Assembled into Flexible Bearings & Bangles "Round & Oval" Tooling available Available in Various Widths & Profiles "Price on Request" Additional Photos:Wire, Plate & TubeWire & Tube Makingused1355-146Pawtucket, RIhttps://www.goldmachinery.com/listings/6152938-used-1355-146-mdm-shaping-machine-for-flat-stock-jewelry-bangle-making110 / 1ph / 60hz20003mm18mm0,15mm0,5mm35mt/min42mm7mm309 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c293596c149c2fceb9a720b08454362/original-1355.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a20033244afd33088255a2421e369496/original-1355-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a47e08fea5f632a98bbe9b247414870/original-1355-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d9672ffa0a4ef2a7cbcdedc7a85813f/original-mdm-0012-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/363779ecbe1782f8f55f119753f49155/original-mdm-0022-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/deb05704eb4c871f003adc11beab399d/original-mdm-0032-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/686487a2d63b7bca0869202168cdbf35/original-mdm-0041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30452ce0931beda5cf8ac68036222c29/original-mdm-0052-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d17229a7c9e07205d7dddbbb8283e734/original-mdm-0062-768x1024.jpg2024-09-25 15:41:26 UTC6152939The new bench has been planned for the installation in small workshop where there are problems about space. This kind of bench is composed of two pieces:- the drawing bench, made of very high quality materials, equipped with a reduction gear;- a support made in steel that is easy to place on the wall. This support includes a reduction gear and a chain which permit to lift the bench against the wall, to reduce its dimensions when you do not work with it. The operations of ascent and descent of the bench are made easier from the automatic position of the leg and moreover the particular ratio of the reduction gear permits an easy and speed position. The security of the operator is guarantee from the use of a high strong chaine. - to be installed requires a room high cm 275 (minimum). Model 1003 Available Ex-Factory, Italy Plus CratingWire, Plate & TubeWire-Drawing / Bull Blocksnew1003Pawtucket, RIhttps://www.goldmachinery.com/listings/6152939-new-goldpro-varini-mario-hand-draw-bench-wall-mount-foldable120cm10 mm180cm x 52cm x 92cm60KgPriced €1.300,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/233b484b6b3dd788126565d52670f9f0/original-2-e1516886181167.png2024-09-25 15:41:23 UTC6152940Electrical - 220 /380 Volts 3Ph ,50/60 Hz Machine Type - MZ4 Maximum Number Of Passages - 8 Approximate Starting Wire Size - 3 mm Approximate Floor Space Required - 48"x70"x60" Estimated Weight 1700 lbs+/- Equipped With: Variable Speed Drive Wire Payoff Traversing Take Up Coiler/Spooler Coolant Tank & Pump System Condition - Very Good ,As Taken From Service Additional Photos:Wire, Plate & TubeWire-Drawing / Bull Blocksused7049-140Pawtucket, RIhttps://www.goldmachinery.com/listings/6152940-used-7049-140-carl-wezel-8-pass-precision-wire-drawing-machine-for-precious-metal-other-similar-wire-reduction-applicationshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b06ebf50c8d2b1831825adb73f750581/original-7049.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4efbb9f02ab02cd882779aa7c7da33ae/original-7049-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3b2c0103d7f15295abedd72fe215db3/original-IMG_4046-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/781696215d36c0f605c0e373481a5d9f/original-IMG_4047-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e14f2af98f8d48f979d23e5f21560dd/original-IMG_4040-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce7f16012429e7af2b8d01ef981b2c70/original-IMG_4041-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/722038f44183211ffe0cc7426ef51273/original-IMG_4042-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7dfac8ec4520e3d40c69004e9374826/original-IMG_4044-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ffbd142e9f61fa9f6c890ed468df917/original-IMG_4045-768x1024.jpg2024-09-25 15:41:27 UTC6152941Four passages multiple wire-drawing machine with clutch adjustable on the coiler. Rotating protection on the coilers and safety standards control (continuous control with low protection and foot control with high protection). Forced lubrication on the hole dies. Drawing speed 1'/40 mt. Minimum wire output size; 0,2mm (.008") Wire capacity is approximated, based on dead soft non ferrous wire Construction standards in accordance to "CE" with respective documentation. Installed horse power 0,75 KW. Power supply 380V. 50HZ 3-Phase. Dimensions: Length 1200 mm Width 580 mm Height 550 mm Approx.Weight 110 kg Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull Blocksnewtl4Pawtucket, RIhttps://www.goldmachinery.com/listings/6152941-new-tvn-mod-tl4-four-passages-wire-drawing-machine1.5mm (.060")https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7b7115bae19c30f6ee88f8ed27e73699/original-tl4.jpg2024-09-25 15:41:26 UTC6152942Single-Phased or Three-Phase Motor 2HP Motor The bench is equipped by a device for the connection and disconnection of the motorized or hand cycle Available Ex-Factory, Italy Plus CratingWire, Plate & TubeWire-Drawing / Bull Blocksnew1201Pawtucket, RIhttps://www.goldmachinery.com/listings/6152942-new-goldpro-varini-mario-motorized-hand-draw-bench1.300 Kgmt. 6/mPriced €4.440,00Priced €5.090,00Priced €6.100,00Priced €6.800,00Priced €7.700,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a36583d8b8f530cf6d4c157a9ac4bb3c/original-3-e1516886521947.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c179813e9e00b3c6078ba616bc7a3757/original-4.png2024-09-25 15:41:23 UTC615294318025.0Multiple passages wire-drawing machines with a particularly efficient patented clutch for drawing big wires (3,8 mm max diam.) and small wires (0,15 mm min). The machines have two speeds, foot-control selectable for die-plate inserting, rotating protection on the toilers and standards control (continuous control with low protection and foot control with high protection). Forced lubrication on the wire-drawing plate and on the toiler with decantation and recirculation system. Power KW 5.6/4.1 Thread Input 3,8 Speed mt/min 100 Dimensions Length 1550 mm Width 850 mm Height 1275 mm Approx. Weight 450 kg Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull Blocksnewt10-7-5-exPawtucket, RIhttps://www.goldmachinery.com/listings/6152943-new-tvn-mod-t10-7-5-ex-ten-10-passages-wire-drawing-machine-max-wire-3-8-mm€ 660,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56f27a6815479695b2e9e1434b0559a6/original-t10.jpg2024-09-25 15:41:26 UTC6152944Features: Maximum drawing power 150000 Newton. Installed horse power 11 KW. Drawing speed: from 0 to 3,5 mt/1' min. adjustable independently from the drawing power. Drawing speed adjustable with continuity through the handle of the flow compensated regulator three-way, positioned on the tank cover. Carriage return speed 6,5 mt/1' min. constant (independent from the selected drawing speed). Pre-closure power of pincers (power on the tube to draw) adjustable with continuity from 100 to 2100 kgf, through the screw of maximum pressure valve positioned on the cover tank. Maximum time necessary for the complete closure of pincer: 1 second. Double working way in automatic-manual selectable through the lever from the control panel. Automatic cycle: 1 pushbutton for the closure of pincer and automatic starting of carriage after 1 second, automatic stop at end-stroke, 1 pushbutton for opening the pincer and the automatic return of carriage after 1 second, automatic stop at return end-stroke. Movable end-stroke to draw a great quantity of bars with length lower than 2 meters. Manual cycle: 1 separate pushbutton for each manoeuvre (opening and closure of pincers, go and return carriage). Pushbuttons to start and stop the motor, safety stop, pushbutton to stop the carriage in any position without stop the motor. Construction standards in accordance to “CE” with respective documentation. OPTIONAL: - Carriage for tubes diameter max 100 mm. Dimensions: Hole + Anchorate pin tube for wedding rings Made up by a tungsten carbide brushing mounted on a treated and ground steel stem. These type of mandrel is manufacturered from 16 mm up to the maximum diameter which may be requested. They are used on straight benches in any kind of drawing with reduction not over 25-30%. Available Ex-Factory, Italy Machine Priced for..... € 24.375,00 Carriage for tubes max diameter 100mm... € 8.400,00Wire, Plate & TubeWire-Drawing / Bull BlocksnewKGF Mod. TI150Pawtucket, RIhttps://www.goldmachinery.com/listings/6152944-new-goldpro-tvn-hydraulic-wire-drawing-machine-for-wedding-ring-making2400 mm1400 mm1750 mm1200 kg2 meters.2200 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99c925e4e625c00e9944d5a814a82725/original-image001-4-e1472821478649.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f63a40a3d0ea33abfc9bc0ff5117fa57/original-ring_attache.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/862462767178002022c852b2aa28be77/original-chat-e1472821966173.png2024-09-25 15:41:23 UTC6152945Scroll Down To See Video! Special multiple passages wire-drawing machine for wire 5 mm diam. with patented clutch winch allows the finest adjustment for any type of thread in operation. The machine has two speeds, foot-control, rotating protection on the working place and standards control (continuous control with low protection and foot-control with high protection). Forced lubrication on the wire-drawing plate and on the coiler with decantation and recirculation system. Coiler 300 mm diam. on the last passage. Wire input 5 mm diam. on the 6° passage. Drawing speed 100/40 mt.l1'. Installed horse power 7.5/6 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 2000 mm Width 900 mm Height 1130 mm Approx. Weight 1400 kg Availability: Ex-Factory, Italy Check the latest exchange rateWire, Plate & TubeWire-Drawing / Bull Blocksnewt10-sPawtucket, RIhttps://www.goldmachinery.com/listings/6152945-new-tvn-mod-t10-s-ten-10-passages-wire-drawing-machine-max-wire-5mm€POR€ 800,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/881e8f0ba2ed2592e560e39bc97e4923/original-IMG_7424-e1576767802961.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/375a5c8cf8c35362a5627777fe5838c3/original-IMG_7415-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f524ef44e2634fefa91b7dfc8be38081/original-IMG_7416-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed5fa07fd715b6b80b3fbcd2bfe987b5/original-IMG_7417-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d82cdd87b98affeb3b1dc71aaaf4862/original-IMG_7418-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/86226c092e15a82127aebdee234c8d86/original-IMG_7419-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f23ce4749c51c3c9fb952cbb823f16cc/original-IMG_7420-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d970dfabf22dc2e51f545ef561a4cb87/original-IMG_7422-1024x768.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b86312bd12d180f9669075d1b21bb85/original-IMG_7423-768x1024.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97d2ecb19048d88301bf90660befa939/original-IMG_7424-1024x768.jpg2024-09-25 15:41:30 UTC61529469237.0Multiple passages wire-drawing machine with a particularly efficient patented clutch for drawing small and big wires (minimum diameter 0,15 mm). Rotating protection on the coilers and standards control (continuous control with low protection and foot control with high protection). Forced lubrication on the wire-drawing plate. Drawing speed 1'/40 mt. Maximum wire diameter 2 mm. Installed horse power 1.5 KW. Power supply 380 V. 50 HZ. Three-phase. Dimensions Length 1270 mm Width 850 mm Height 1200 mm Approx. Weight 250 kg Optional: Net filter for refrigerant liquid, € 317,00 Tungsten carbide driving coiler, € 2.447,00 Downcolier group with safety stop, € 608,00 Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull BlocksnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152946-new-tvn-mod-t6-ex-six-6-passages-wire-drawing-machine-max-wire-2mm€ 661,00Check the latest exchange ratehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8d3b2b2692117b0c2fe525425ea74c9/original-t6-ex.jpg2024-09-25 15:41:26 UTC6152947The machine is for the smoothing of the thread either coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines. The machine has two speeds, can also be activated through foot-pedal, it has a forced lubrication on the screw plates and a safety micro-switch on the reel. Wire input diam. 6 mm on silver, 5 mm on gold. Reduction of section 10/15%. Wire-drawing speed mt/1' 30/15. Diameter on the winding point is 213 mm. (8.38in) A special pincers allows to make easily the threading. Construction standards in accordance to "CE" with respective documentation. Installed horse power 2,2/1,5 KW. Power supply 380 V. 50 HZ. Triphase. Dimensions: Length 1400 mm Width 530 mm Height 1100 mm Approx.Weight 230 kg Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull BlocksnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152947-new-tvn-mod-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-inputhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/856e82cd931703d15c6723b685153449/original-t2-p.jpg2024-09-25 15:41:26 UTC6152948Multiple passages wire-drawing machines with a particularly efficient patented clutch for drawing big wires (2,3 mm max diam.) and small wires (0,15 mm min). The machines have two speeds, foot-control selectable for die-plate inserting, rotating protection on the coilers and standards control (continuous control with low protection and foot control with high protection). Forced lubrication on the wire-drawing plate and on the coiler with decantation and recirculation system. Power supply 380 V. 50 HZ. Three-phase. Dimensions: Length 1550 mm Width 850 mm Height 1275 mm Approx. Weight 450 kg Availability: Ex-Factory, Italy Price: € 24.800,00 Price: €793,00Check the latest exchange rateWire, Plate & TubeWire-Drawing / Bull Blocksnewt12-7-5-exPawtucket, RIhttps://www.goldmachinery.com/listings/6152948-new-tvn-mod-t12-7-5-ex-twelve-12-passages-wire-drawing-machine-max-wire-2-3-mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e8f01bc5dd6d00d704c50add8eb1e64/original-t12.jpg2024-09-25 15:41:26 UTC615295032241.0The machine is for the smoothing of the thread of big dimension that coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines. This machine is for the tube drawing to cap floating. The machine has two speeds, can also be active through foot-pedal, it has a forced lubrication on the plate and a safety micro-switch on the reel. Diameter drag coiler 600mm. Revolving protection on the work top with safety micro-switch. Pressure roller in plastic material for containing the thread, with pneumatically operated. Electronic variation of velocity. Wire-drawing speed 1-10 Meters/Minute max. Wire input max 8,5mm on silver, 7,5mm on gold. Reduction of section 10/15%. Diameter drag coiler 600mm (23.62") Installed horse power 5 HP. Power supply 380 V. 50 HZ three-phase. Dimensions: Length 2800 mm Width 1300 mm Height 1450 mm Approx Weight 840 Kg. Optional: Net filter for coolant...€ 290,00 Adapter aluminum for dies diam. 28/45...€ 211,00 Rewinding group in series at the Mod.T2 with reel...€ 11.089,00 diameter 250 mm, adjustable clutch group, adjustable roll prebending and electronic variation of speed Adjustable incision head with anchorage clamp four incision rollers...€ 3.462,00 TWO PASSAGES, gold wire - drawing diameter 7 mm and silver diameter 7 mm, downcoil diameter 600 mm, 10 KW. with electronic variation of speed up to 50 Meters/Min.– special Availability: Ex-Factory, Italy Check the latest exchange rateWire, Plate & TubeWire-Drawing / Bull BlocksnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152950-new-tvn-mod-t2-6pv-two-passages-bull-block-wire-drawing-machine-7-5mm-max-gold-wire-inputhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ee818276afd26411b075183d7579162/original-t2-6pv.jpg2024-09-25 15:41:26 UTC615295120150.0The machine is for the smoothing of the thread of big dimension that coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines. This machine is for the tube drawing to cap floating. The machine has two speeds, can also be activated through foot-pedal, it has a forced lubrication on the plate and a safety micro-switch on the reel. Diameter drag coiler 400mm. Revolving protection on the work top with safety micro switch. Pressure roller in plastic material for containing the thread, with pneumatically operated. Wire input max 8mm on silver, 7mm on gold. Reduction of section 10/15%. Wire-drawing speed 1-30 Mt/min. Installed horse power 5,5 / 3 HP. Power supply 380V. 50HZ Three - Phase. Availability: Ex-Factory, ItalyWire, Plate & TubeWire-Drawing / Bull BlocksnewPawtucket, RIhttps://www.goldmachinery.com/listings/6152951-new-tvn-mod-t2-4-two-passages-bull-block-wire-drawing-machine-7mm-max-gold-wire-inputNet filter for coolant, €290,00https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/af7e6f0f2be5118548b98bebe6414a3b/original-t2-4p.jpg2024-09-25 15:41:26 UTC61595735450.0Gold Machinery Group ----------------------------------------------------------------------------------------- We are pleased to offer you... Benzinger Inside Turning Horizontal Ring Lathe with Precision Radius Attachment & Lever Operated Cross Slide Our Inventory Number: 5994-440 Technical Specifications: 220V/3PH/60HZ Radius adjustable from 30 - 50mm ( 1/8" - 2") Ring sizes and widths of rings are set of separate dials No measuring required By exchanging the front radius slide , the R3D allows the machining of the inside of wedding rings cylindrically Overall dimensions: 40" x 21" x 50" high Estimated weight: 210 kg. ( 462 lbs.) Equipped With: Collet closer Radius attachment Lever Operated Cross Slide Benzinger stand Benzinger collet Please contact us for a freight rate to your location! ABOUT US Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field.CNC, Metalworking & ManufacturingProcess Engineering EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6159573-used-benzinger-inside-turning-horizontal-ring-lathe-with-precision-radius-attachmenthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0794c2cef118b7c772ded14d4359f54d/original-1114903064.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f644e4bea71e44b1ec25020553ea25f1/original-1114903064_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b4c89b472daf73aa0ed6b7e9480d78a/original-1114903064_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f424853942976b67ac8cb42706eb58a8/original-1114903064_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/986e57e358e95146a546204328c0d796/original-1114903064_5.jpg2024-09-25 14:51:49 UTC61600453750.0Gold Machinery Group ----------------------------------------------------------------------------------------- We are pleased to offer you... EnvisionTEC Perfactory 4 Mini XL 3D Printer - New 2007 Our Inventory Number: 3930-700 Technical Specifications: VOLTAGE 110V 1PH 50/60 CYCLE Model: Perfactory 4 Brand: EnvisionTEC Country of Mfg: Germany Build envelope: 140 × 105 × 230 mm Build volume: 3.38 L Max. resolution (XY): 0.05 mm Max. resolution (Z): 0.1 mm Process Vat photopolymerization (VPP) Technology: LED light > Digital Light Processing (DLP) Feedstock format: Resin Materials: Polymers, Thermosets, Photopolymers Dimensions: 730 × 480 × 1350 mm Weight: 70 kg About section Perfactory® Perfactory® 4 Mini XL with ERM EnvisionTEC’s Perfactory 4 Mini XL with ERM is a low cost, easy maintenance and user friendly 3D rapid prototype manufacturing system.CNC, Metalworking & ManufacturingProcess Engineering EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6160045-used-envisiontec-perfactory-4-mini-xl-3d-printer-new-2007https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9963389bacd834b0d30e0ec893c9228c/original-1156887268.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c13599e8e3da1a6b1fb7571d6f2de17/original-1156887268_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46aaae7705ff70bfda5356658a752d98/original-1156887268_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/129d174b5f94a7d11ae927757df85108/original-1156887268_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1f1f873673f01a3bd971d4b14984b84d/original-1156887268_5.jpg2024-09-25 18:33:20 UTC6161780949.0Gold Machinery Group ----------------------------------------------------------------------------------------- We are pleased to offer you... Star Model 3" Scrap Chopper with Capacity to Cut up to .065 Scrap Our Inventory Number: 5293-570 Technical Specifications: 115V/1PH/60HZ Motor: 1/3 HP Overall dimensions: 20" x 11" x 37" high Estimated weight: 60 lbs. Capacity to cut up to .065 scrap Please contact us for a freight rate to your location! ABOUT US Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills, all dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand.CNC, Metalworking & ManufacturingProcess Engineering EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6161780-used-star-model-3-scrap-chopper-with-capacity-to-cut-up-to-065-scraphttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9185f75d91ad6c9001d4efaf4087d539/original-2737240903.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb33ee09a19c3f454a1ae8328cb739d9/original-2737240903_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4914f254f875d64b483e528c834a3e0f/original-2737240903_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/975f662adc34e4d784287ef9d52e5d5f/original-2737240903_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0882fe51d9b33a3f2e1e06183304f160/original-2737240903_5.jpg2024-09-26 14:58:00 UTC61669854399.0Gold Machinery Group ----------------------------------------------------------------------------------------- We are pleased to offer you... Abbondio Vitari ( Italy) Nail Header, Model #VBF/AV5583 Our Inventory Number: 2546-145 Technical Specifications: 440V/3PH/60HZ S/N: 1756 Tooled for .025" wire Pieces per minute: approx. 500, making single notch post Length of part(post): .256" Center height of wire infeed: 30" Motor: 2 HP Overall dimensions: 32" x 48" x 38" high Estimated weight: 1500 lbs. Equipped With: One shot lubrication system 2-plane wire straightener Power lubrication system Swing down cover/guard We will load your truck from our adjustable loading dock for free. For skid/cover/delivery, please contact us for rates to your location. We ship globally. ABOUT US Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field.CNC, Metalworking & ManufacturingMetalworking EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6166985-used-vitari-nail-pin-header-machine-model-vbf-av5583https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cc52898d9f518bbc0363a04f5c81ca1c/original-3627398687.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83a01cc4b2d2199266818a42207f1446/original-3627398687_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc1b8faa44186cffd0b5cc80b42fb904/original-3627398687_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9c52972d4d2dd12ed5af505540fb30a/original-3627398687_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1250b0dfc824518d486b921e581f6647/original-3627398687_5.jpg2024-09-28 20:13:46 UTC61840893900.0CNC, Metalworking & ManufacturingMetalworking EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/6184089-used-small-theodore-bechtold-germany-curb-chain-making-machine-excellenthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c970c4beb1dbb6411579c515a5c8cd3f/original-3000217130.jpg2024-10-06 20:48:31 UTC6272393VitariTechnical Specs: - 220/440 /3PH/60HZ - Currently Wire on 220 - Motor HP 1 - Year of MFG 1967 - S/N: 1988 - Tooled for .025" wire - Pieces per minute: approx. 500, making single notch post - Overall dimensions: 26" x 42" x 48" high - Estimated weight:1200 Equipped With: - One shot lubrication system - 2-plane wire straightener - Power lubrication system - Swing down cover/guardCNC, Metalworking & ManufacturingMetalworking Equipmentused1249-145Pawtucket, RIhttps://www.goldmachinery.com/listings/6272393-used-abbondio-vitari-nail-header-tooled-for-025-wirehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ea30296a83d86e129bae82f4ae004e1/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69457d5a3719a8fbfd5c03f2148eab3b/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/32212abe5d68af14d7570d3ec1329d84/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9cdd42ff4acf93bd9548bb515e13c300/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27e9719d185d4f4c1daf31878d173a85/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e41513ed2e0625a7b77956219692fc5e/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03342750364b596b8eced4e303a3b733/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bc1dcfaaf0d64bd9919a0346d098f2f/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d40b475d07b7b4b1e43ca793bc778849/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/857a3db85eb181812ef9af29fccd51b1/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e37fc70dae749f3455a4e6ef8ef2c09f/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e45877b24a3846f8be58cd828c42c4e4/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6e65d641f7c3845be363d0901a484e8/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f73ab6011f6d6c63908f6cd256d2bfb/original-used-abbondio-vitari-nail-header-tooled-for-025-wire.jpg2024-11-06 16:21:25 UTC6272633SouthbendCL 187AB0Technical Details - Bed Length 4' - Swing over Bed and Saddle 10-1/8" - Swing over Cross 5-7/8" - Distance between Centers 28" - Hole through Spindle 1-3/8" - Spindle Speeds 55-1400 RPM (12) - Inch Series Threading from 4 TPI - Dimensions: 65" x 26" x 58" h - Estimated weight 1100 LBS Equipped With - 5c Collet quick production collet holder - Quick Change Gear - TailStock w/ drill chuck - Thread dial · - Cabinet stand - 4 Jaw chuck - assorted 5C colletsToolroom & General MachineryLathesused779431Pawtucket, RIhttps://www.goldmachinery.com/listings/6272633-used-south-bend-heavy-10-model-cl-187ab-precision-toolroom-lathe-with-threadinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be03f026ccee85c60d85c92fa89674cd/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1312851f10bfe589a726813597255264/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e118b7a3ee7b197c3a6dbe03174498bf/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41f963662bfb736e0b0f94811809030b/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/964d8f27255dc41df0ca9f8d1c0be725/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2c085496efa23504396225d41e6e9b7/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eba7a07c3872b0a5c8f2df80e51e19f3/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13f82b30676f7b5b27daa41cd3bfe3e2/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7da86bb9ca49116be0a0596510d585f/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/254a7e8ee46ec3c1105c4389c2653099/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20f095f6589c103717d2b656abc47af3/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccbc5a968b9f4ef821a49a7cbd20f53a/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c0c2e1097c29e0870375bb6a007306f6/original-used-south-bend-heavy-10-model-cl-187-ab-precision-toolroom-lathe-with-threading.jpg2024-11-06 16:48:12 UTC6272650South BendCL8175B0Equipped With - 5c Collet holder - TailStock w/ drill chuck - Thread dial - Heavy Duty stand - 3 Jaw chuck - 4 Jaw chuck - assorted 5C collets - Taper attachmentToolroom & General MachineryLathesused779432Pawtucket, RIhttps://www.goldmachinery.com/listings/6272650-used-south-bend-heavy-duty-precision-lathe-model-cl8175b-14-1-2-x-32-with-taper-attachment32"5'14-5/8"8-3/4"28"1-1/2"48- 4 to 224 Threading from 4 TPI65" x 26" x 58" h 1400 LBS https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7caf5b1bb4bc9911b83c8e3f6bddff5/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4466e84f8b5ea487f21e6be1a1ab4cc4/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc5f86e40f481d6823813485431af504/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52697bc2528ac204fffdac5ee6dddc12/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74cabcec09a14004661fdd43197cd834/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c63a977b734f6e3a1e561be8c4fd9c67/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3a06d674c19a177ac55014102f8debe/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bcfcc732e48ab5ba247003bbf5e62ad/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b68a5f3dd1cab64126f0a85cf839dbdf/original-used-south-bend-heavy-duty-precision-lathe-model-cl-8175-b-14-1-2-by-32-with-taper-attachmen.jpg2024-11-12 19:15:15 UTC6272663Bridgeport0- 220V/3PH/60HZ - Spindle Type R8 - Table size: 9" x 32" - Longitudinal table travel: 20" - Cross table travel: 12" - Vertical travel of knee: 16" - Spindle speeds: 80 - 2720 RPM (8) - Motor: 1 HP - Quill travel: 5" - Vertical capacity: 0 - 18-1/2" - Throat capacity: 6-1/4" - 18-3/4" - Maximum workpiece weight: 300 lbs. - Overall dimensions: 76" x 63" x 77" high - Estimated weight: 2130 lbs Equipped with: - 12 Assorted - R8 ColletsToolroom & General MachineryMillers, Verticalused779433Pawtucket, RIhttps://www.goldmachinery.com/listings/6272663-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-r8-collets9" x 32"20"12"1 HP5"0 - 18-1/2"6-1/4" - 18-3/4"300 lbs.2130 lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b382d8f8dc21b666a6c23d7651e5433/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f6dc15395a9b78070f6413177784b28c/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a5d6257abef3b3e500ca630d69805a1/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fdd36f339160f1a6f9e96072eda48c7/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27d812303ffc6e3916d3ea4bb420c724/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bed2cf0e13da19a6f8849bb5b1132cec/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef7388ecf065b29223970dd1276b2cfc/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/70f92dbd1954396100afb9d6a0f99ec7/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66ff7240cd36cffd74aac02230b71367/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/670773bcd351316ee16f57a0454069ae/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d0e04c4bb593490565c8068f120d7c7/original-used-bridgeport-9-x-32-1-hp-8-speed-ram-type-j-head-vertical-milling-machine-and-r8-collets.jpg2024-11-06 17:08:33 UTC6272681Johnson0- Capacity: 10" Rounds, 18" Flats - Horsepower: 1HP - Voltage: 110V, Single Phase - Maximum Blade Speed: 270 fpm - Blade Width: 1" - Blade Length: 137" - Blade Speeds: 50/90/160/270 fpm - Solid Round 90˚ Capacity: 10" - Solid Round 45˚ Right Capacity: 7" - Solid Rectangle 90˚ Capacity: 4-1/2" x 18" - Solid Rectangle 45˚ Right Capacity: 4" x 10" - Bed Work Area: 11" x 18" - Weight: 935 lbs - Height: 75" - Floor Space: 30" x 65" - Floor To Bed: 23"CNC, Metalworking & ManufacturingSawsused779435Pawtucket, RIhttps://www.goldmachinery.com/listings/6272681-used-johnson-10-x-18-horizontal-metalworking-bandsaw10" Rounds, 18" Flats1HP110V, Single Phase270 fpm1"137"50/90/160/270 fpm11" x 18"935 lbs75"30" x 65"23"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1b53a3969f7ad55df37f228fa4f20db3/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64e8790538c7e7c3d8fd851431e3b6e6/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d619d448e6ea93b8cababb7314d5458/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8b091b7e1381f5e163f3c48cf6bf5f76/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6073b5004acb9a587ae1999e59e65cbd/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffa4c28c884db87a6da61a7abd718330/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8d8d8216bd794d0b1aaca4e14eb718d/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b44b841395a9059f53a9719722c7511a/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b873da5404d6bd24ebc497882a1bafd/original-used-johnson-10-x-18-horizontal-metalworking-bandsaw.jpg2024-11-06 17:26:23 UTC6272831KalamazooND-100- Grinding wheel 10" - Voltage 220 - Model #ND-10 - 1750 RPM - 1 Hp - 3.2 Amps - Current: AC - 220 Volts - 3 Phase - 60 Cycle - Overall size 28" x 28" x 48" H - Weight 500LBS Equipped with: - Dust collectorPolishing, Finishing & PlatingMiscellaneous Grindersused779438Pawtucket, RIhttps://www.goldmachinery.com/listings/6272831-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4e74abad3e25e63808be1cd305d2b126/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/220c11dad850bdc456e3d8e3136d6075/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d3be02e572e3edb8b4dc4d6c8cb8a58/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/065d467cec61c1cc44a6a788d1884f8a/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b14e9dbdb34fbb19ea43d8c5b82cdffb/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74ad9f9745e455e418c0c9542d2f849d/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/52b35d844158bfaa004fd94fe8a85c05/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7dbd2f0a84f0c12f3441215f6a39502/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/115d8db270acb5e011ac92f3a28f62dc/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/734e63df8166e3310dfe343a33eaf2be/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a0f127ecf25b171e03e2b8819aec25a/original-used-hammond-kalamazoo-no-dust-self-contained-pedestal-grinder-model-nd-10.jpg2024-11-06 18:39:43 UTC6272833Adams#1399.0Depth of throat from center of ram: 3" Distance ram to base: 6" Maximum stroke: 2" Bore in ram: 13/16" diameter Size of table: 22" x 16" Capacity: in soft steel: 1/2" Approximate pressure: 2-1/2 tons Overall dimensions: 22" x 24" x 60" high Estimated weight: 360 lbs. Equipped With: - Adjustable stroke - Cast Iron Base - Foot operated Pedal - Die DishPressesFoot & Arbor Pressesused779439Pawtucket, RIhttps://www.goldmachinery.com/listings/6272833-used-adams-foot-kick-press-1-jewelry-forming-stamping-metalworkinghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08a02c869fdfbb9f4a73d20cf9394008/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/18c5f7babf496a49f92024c031197a9c/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35dd51b290b0f69e22ffb935b9cc5208/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3ae2616126b628da2e5cb9afe5732103/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/de0328fb079fc67d8c4081b764e13dc6/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd628d82e3b7460811f4aeb9bda47160/original-used-adams-foot-kick-press-1-jewelry-forming-and-stamping-metalworking.jpg2024-11-06 18:42:49 UTC6272838M&N200 Ton0Technical Specifications: - Class: PRESSES, TOOL ROOM / HOBBING - Make: M&N / Clifton - Model # Hobbing - 220V /440V 3 Phase / 60 Cycle - Capacity: 200 Ton - Max Stroke: 8 - Operating Press: 4000 PSI - Pump Low Pressure: 1 GPM - Controls: Pushbutton Operation w/Stroke & Pressure Control / Pressure Gauge - Weight approx: 3000 LBS - Overall Dimensions Approx: 32" L-R x 32" F-B x 68" H - Description: HYDRAULIC 4 Post Upstroke Type HOBBING PRESS Equipped With: - 10" upper and lower plattens - Heavy Steel Jacketed Chamber with Lexan Window and safety switch / lock on door!PressesHydraulic & Air Pressesused779440Pawtucket, RIhttps://www.goldmachinery.com/listings/6272838-used-m-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-copper-steel-goldhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc1a026fb2fbbf9cd5510c58aef83647/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4788ba3db68daf4f4183cb66c32cdfc/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e0c7e7eacbbe81357ce9f6d304ee89f/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0201618c94c42c108f1ce2ea6e04305/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6736639f0868b489b10359b922aeeac7/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eaadfac2d91fea8c22630d90b8221581/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac039cbd80e5b8f92891ec585a94a629/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d342f5bc16cf826404e7bf3dc26b7f6/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b3946f045dd12f8e9fd66714c5bfb98f/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1a209d67612c80ba93c63a82b72855c5/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/71c78ed502e2bc48cae199287864e386/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ddc32d3d236753b9a3e61ce0d61d226/original-used-m-and-n-modern-200-ton-clifton-4-post-up-acting-hydraulic-hobbing-press-metal-forming-c.jpg2024-11-06 18:46:52 UTC64513962025N Ferrara0Brand New, N. Ferrara Coin Rimming / Coin Edge Machine Includes automatic bowl feeder standard, bridge attachments available to automatically feed from blanking/punch press. Current Lead Time Approximately 14-16 weeks.Coining, Bar & Ingot MakingMinting MachinerynewNFRM01Pawtucket, RIhttps://www.goldmachinery.com/listings/6451396-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder208/240 V, 3 PH, 50/60 Cy.0.625" / 2.000" ( 15mm to 50mm)0.035" / 0.140" (0,9mm to 3,56 mm)12" (304 mm)Adjustable100 to 1000 P.P.MDirect Driven5 HP (3 Kw Variable speed)Manual36" W x 36" L x 42" H (914 mm x 914 mm x 1066 mm)1800 Lbs. (818 Kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50b859ad1b9d7c738c873b77f6c5f35a/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85be35aac34ea4bf98c64bcf81d9d9d0/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/df86f7d3c1f26ac5636eca730ecfb805/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/629279f5a4ab61ebbdc2c546e55c8eaf/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/632b92c36b0d44c07ce56b1d9607ef79/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c47b5d1fa5199aabd998d8689fc9ef0/original-new-n-ferrara-coin-rimming-edge-machine-with-auto-bowl-feeder.JPG2024-11-21 16:46:34 UTC65447630EQUIPPED WITH: - Analog timer - Dual analog thermostats for heated platensGeneral Jewelry MachineryCasting Machines & Equipmentused1076-310Pawtucket, RIhttps://www.goldmachinery.com/listings/6544763-used-contenti-3-post-rubber-mold-vulcanizer-press-model-175-312220V/1PH/60HZFor 9" & 12"14"15"20 tons20" x 18" x 34" high600 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2baffcd1f1b663fccc412fc480a2b13b/original-used-contenti-3-post-rubber-mold-vulcanizer-press-model-175-312.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/93defc418310a5667a9016eca02380d5/original-used-contenti-3-post-rubber-mold-vulcanizer-press-model-175-312.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/009f8da9fabdce6fd0da53b7ebf3decb/original-used-contenti-3-post-rubber-mold-vulcanizer-press-model-175-312.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/206b0021233c0d8e25e3ba0138ecc465/original-used-contenti-3-post-rubber-mold-vulcanizer-press-model-175-312.jpg2024-11-27 15:37:39 UTC6544836Conley0For production of parts made of low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead). We have much more available equipment including Charles Hones pewter melting furnaces, Spin Casting machines, Mold frames 9",10" and 12" in stock at Gold Machinery Rhode Island's one stop machinery shop.General Jewelry MachineryCasting Machines & Equipmentused779443Pawtucket, RIhttps://www.goldmachinery.com/listings/6544836-used-conley-12-rubber-mold-vulcanizer-for-spin-cast-molds-for-jewelry-fishing-jigs-more220V/1PH/60HZ12" Solid, Heated9" - 12"20 tons500 Degrees FUpdated Digital controls 18" x 19" x 42" high600 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ce94af28908c9572a8274e58d6ad89d/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c6b3d5ae96efede5eb5b53d7937285d3/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/11ad074c901d012a0fc9cf5e4770b37f/original-used.jpg2024-11-27 16:06:19 UTC6571298N FerraraHY800T-S-US0Brand New N Ferrara 800 Ton Coining Press. Available Options: - Automatic Rear Safety Door - Oil Water Cooling - 4-Post Die Holder Current delivery time is approximately 10 weeks.Coining, Bar & Ingot MakingHydraulic & Air PressesnewHY800T-S-USPawtucket, RIhttps://www.goldmachinery.com/listings/6571298-new-n-ferrara-model-hy800t-800-ton-hydraulic-coining-press800 Tons2.5"17" x 27" (441 mm x 686 mm)11" (275 mm)15 HP208 / 230 / 46044" (1118 mm) x 60" (1524 mm) x 70" (1778 mm)7,800 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/947f93d01e079a9a47d8c3c2f9deaa76/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9eed240c2f43a7c65920a6e655d200db/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64057639cb243334e3ddb066102bbcb1/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31ac9959893095c0d382bdcad05fc3e8/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPG2024-12-05 15:37:26 UTC6573424N FerraraHY1000T-S-US0Brand New N Ferrara 1,000 Ton Coining Press. Available Options: - Automatic Rear Safety Door - Oil Water Cooling - 4-Post Die Holder Current delivery time is approximately 6-10 weeks.Coining, Bar & Ingot MakingHydraulic & Air PressesnewHY1000T-S-USPawtucket, RIhttps://www.goldmachinery.com/listings/6573424-new-n-ferrara-model-hy1000t-1000-ton-hydraulic-coining-press1000 Tons2.5"18" x 28" (457 mm x 711 mm)11" (275 mm)20 HP208 / 230 / 46044" (1118 mm) x 60" (1524 mm) x 70" (1778 mm)8,900 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/947f93d01e079a9a47d8c3c2f9deaa76/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9eed240c2f43a7c65920a6e655d200db/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64057639cb243334e3ddb066102bbcb1/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31ac9959893095c0d382bdcad05fc3e8/original-n-ferrara-model-hy-800-t-800-ton-hydraulic-coining-press.JPG2024-12-05 21:08:12 UTC65895480Drop Hammer #10 DA Pneumatic Double Action Gravity Drop With Z-80 Safety Gate - Die striking, stamping, coin making & more! This unit has a dual hammer action. Base is up-acting as the hammer comes down to create a perfect strike - Type #10 DA - Anvil weight Est. 250 LBS - Anvil opening 6"/6" - Die holder Upper work piece opening 4"/4" - The lower die, size 15"/15" - Approximate Net Weight: 6920 lbs Equipped with - Z80 Pneumatic safety gate - Additional Workpiece holders as photographed - Pneumatically operated hand lever About section The Double Acting Air Power Drop Hammer is the most powerful machine in general for the production of commercial impression die forgings. medallions, and struck coins by impact pressure. Shortly after the First Industrial Revolution (about 1760) the steam hammer was developed. Then, in 1838, James Nasmyth of Scotland developed the hammer referred to as a double acting hammer in which steam or air pressure is applied to both lift the ram and also to drive it down with greater velocity than gravity alone. Such hammers can attain ram speeds up to 350 inches per second, although for stress and pressure design analysis a ram speed of 200 inches per second is used. The basic construction of the hammer consists of a heavy anvil base, part of which is usually below round, which supports two frame members (columns) that accurately guide the vertically powered ram. The columns also support the cylinder in which the piston and piston rod is driven to operate and power the ram. The lower surface of the ram carries the upper die which contains the top half of the cavity, or impression, that shapes the forging. The lower die, which contains the remainder of the impression, is firmly wedged in place in the anvil by a driven key, as is the top die on the ram.Antique Machinery & ToolsMiscellaneous Antiquesused779444Pawtucket, RIhttps://www.goldmachinery.com/listings/6589548-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gatehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3f0491454ffbae653e2e80a67ecd0c39/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7050422b3dee98ef379faaa8d78e53a5/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39de8e4ae5ff588dc713c00892706bfa/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/933699de4f3623b0593c4ad3c7016061/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/078551969ed44d624e771fa12927694b/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78e5105ac631c527ab76041dc4930021/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d10b0a9d22a4a67c0ea32e3bab7ccb45/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8296ea88f0feee60da8d2a476301d72c/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/edb67c21eadc73b8cf3d3a8d53b53d58/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a181363a36b5e150d7e5152a6ed889de/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d870a41e1e7cd42df864a2668acb4e5e/original-used-drop-hammer-10-da-pneumatic-double-action-gravity-drop-with-z-80-safety-gate.jpg2024-12-09 14:49:00 UTC65901490Pneumatic Drop Hammer Co.air-lift, gravity drop hammer. The head of this hammer is lifted by air pressure in a cylinder mounted vertically on a tie-bar at the top of the columns in line with the travel. The blow is delivered by the falling weight of the head, unassisted by air pressure, but the force of the blow may be adjusted to any desired amount within the capacity of the machine by adjusting the control valves to give a cushioning effect. This adjustment is made by the single movement of a lever which may be moved at will by the operator to strike light and heavy blows alternately or locked in one position to repeat blows of any desired force indefinitely. The head slides upon two round columns of steel which are ground accurately to size and parallelism. Two bronze bushings on each side of the head encircle the round columns and provide ample wearing surface to guide the falling head without undue friction yet confine it against looseness and tendency to shake when the blow is delivered. The head is released to strike the blow by a safety device, entirely pneumatic, which will not permit the release to occur while either of the operator's hands are in the danger zone; or it may be released by a treadle. The valves may be set to operate the head continuously while the treadle remains depressed, or to deliver one blow, only, at each depression of the treadle. A quickly made adjustment of the safety device renders the treadle inoperative when desired so that the dies may be adjusted or removed without danger of the hammer head falling by reason of accidental depression. The valves are so constructed that the head cannot fall because of failure of the air pressure, or even because of breakage of the supply pipe. The height of drop may be regulated to any distance within the capacity of the machine, and the valves set automatically to cushion the blow to any desired extent. The head is ordinarily held up by air that is trapped in the cylinder, but a mechanical safety dog is provided to engage and hold it up while changing or adjusting the dies. The advantages claimed for the hammer are: that it is self-contained and can be set up anywhere without reference to belts, shafts or other power transmitting devices; that it is rapid in action because of the fact that the head is picked up instantly on the rebound by the air cylinder and there is no loss of time, or "shivering" in the return stroke; and that it so simple in construction and operation that it may be operated by unskilled men. It is made in all sizes from 50 lb. up. The anvils are ordinarily made to weigh fifteen times as much as the heads, but may be made in 20-to-1 ratio for special work, if desired. A steel insert in the anvil secures the lower die.Antique Machinery & ToolsMiscellaneous Antiquesused779445Pawtucket, RIhttps://www.goldmachinery.com/listings/6590149-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammerhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d1900f871a039fa8487dccabf5879220/original-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/731bfd7d1acb12450a5022604e761a5d/original-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/caed51143e6ca8d737cdb8f6df53eed4/original-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0eeb7dbeb5859fbf6c3176f161f48a13/original-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/412604a7edcc42ddaa5b15c0a85aed42/original-used-pneumatic-drop-hammer-co-air-lift-gravity-drop-hammer.jpg2024-12-09 21:45:34 UTC65949662025N Ferrara60T-DS-BL-TRSTANDARD OPTIONS: - HYDRAULIC OVER LOAD - PROTECTION - Automatic oil & lubrication pump - Touch screen operation panel - Die height indicator - Crank angle indicator - Double Solenoid Valve - Reverse cam switch - Power supply socket - Balance device - Anti vibration press mounts - Electronic cam indicator - Electronic stroke counter - Air soure receptacle - Against over-run safety device - Air ejector socketCoining, Bar & Ingot MakingPower Pressesnew779446Pawtucket, RIhttps://www.goldmachinery.com/listings/6594966-new-n-ferrara-model-60t-ds-mechanical-60-ton-blanking-press60 Tons2.75" (70mm)80/120 SPM14.2" x 19.7" (360 mm x 500 mm)10" (300 mm)7.5 HP ( 5.5 Kw)208 / 230 3PH 50/60 Cy39" (1000 mm) x 69" (1770 mm) x 109" (2780 mm)12,250 LBS. (5,500 Kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/688399218bd374f210b5543f4d4c9257/original-new-n-ferrara-model-60-t-ds-mechanical-60-ton-blanking-press.jpg2024-12-11 19:57:28 UTC659843419300Engraved Pattern Rolls, Antique Master Collection of Jeweler tools for Earnings, Bracelets Bangles and more! Consisting of 61 Pcs total. Including pattern & forming rolls with spacers. Largest Pattern roll 4" diameter Width approximate 2-3/4" Key way mounting hole approximate 1-7/8" Small roll size approximate 3" diameter Width approximate 1-1/8 " Key way mounting hole approximate 1-1/4"General Jewelry MachineryMiscellaneous Tools & Diesused779447Pawtucket, RIhttps://www.goldmachinery.com/listings/6598434-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelets-bangles-and-more325 Lbs TotalOriginal Paperwork as photographed. Last dated use of this roll set was 1960'shttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/96d2a46942fa0e421b0c02782c01c047/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4b77b246d94a01907d005a56a1e6bcf/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7301c30d424c4b6d7a5661af95e0946a/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/316e4196bfa600dfa7bdc389c3eb66da/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1e3bc99392a03f812760b4192543f92a/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b7af611ed532ab1e91c8aeb1f828d0e/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2324ddae7525b72e0f86bad7e16a95bf/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fc0025a8774945f36f059d52247d3ec1/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6c5512358649e69b23e0b90f2d1451e/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cebcdcca100df4b5cd7367f302e7523e/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8e2f01843962c1eb810ab8499cb27d2a/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e6e51280e29d3cd3635be7153ede5154/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1bd42a2537edbcdc070eaefd19ea9250/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8428118c2c60f621c7e0bbf126b6216/original-used-engraved-pattern-rolls-antique-master-collection-of-jeweler-tools-for-earnings-bracelet.jpg2024-12-12 16:33:00 UTC6610421NeutecJ5 -Series 20THIS MACHINE IS SOLD AS-IS FOR PARTS ONLY.Wire, Plate & TubeCasting Machines & Equipmentused779448Pawtucket, RIhttps://www.goldmachinery.com/listings/6610421-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa208V/3PH/50-60HZVariable frequency production casterLess than 3 minutesUp to 25 flasks per hourhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d85ee3add2ed23ee25050bb13d848302/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1361fec915308011abdcdf5a8b448629/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c2c79fb8580f1ad2fe9de7d28cfa54b/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/881d66bcb46b4cb012f15077edc49f70/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ccd0e72073c66c17e22d3d8c4add412/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21d5e5c695c517d3b01f611ad9668ae6/original-used-neutec-j5-series-2-vacuum-induction-casting-machine-neutec-usa.png2024-12-19 20:28:35 UTC6610429NeutecJ10 B0Cycles in under three minutes (20-25 flasks/hour), but its alloying capacity is about 62% higher. 240/400 cc crucible.Wire, Plate & TubeCastingused9311105779449Pawtucket, RIhttps://www.goldmachinery.com/listings/6610429-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa208V/3PH/50-60HZVariable frequency production casterLess than 3 minutesUp to 25 flasks per hour1961 gr - 14 kt goldup to 5424 gr - 14 kt gold60% of liquid capacity(fine grain) alloyhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95f825e9485bf2c5a2d168cb2fbffbca/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4868c0d1298047c9fd118eb1d31dc2e5/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/37e7ff7e37756d286fc58887ae6990f4/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3999a203a8d8cc32f50a823bb84091a1/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/575935c687803bd899ebebb227c7b67f/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21aa2451babc38984f4ba9752d49b73d/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dbfa95d352702b83fde9f5898d267ead/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/62c9caff8442d24a437d457bb213f71f/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7ba75773eeffcee5c91cf5c25f971ba/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ea7a3c7453ea95281cc6e268337b6ef8/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7774272ff49602a7c2a4281e58347753/original-used-neutec-j10-b-vacuum-induction-casting-machine-neutec-usa.png2024-12-19 20:33:49 UTC66439222025IKOIZ44_015Continuous electric induction system furnace straight type for the production of gold or silver bullion in controlled atmosphere, suitable for the working with graphite ingot molds. For the production of Bars from 1oz to 100oz Bars ADVANTAGES OF FLAMESS TUNNEL - Significant reduction of rejects due to increased quality of the bars - Better for the environment (Green technology) - Cancellation of precious metal losses (loss of weight: 0,01 g/kg) - Safer for the operators - Significant reduction of electricity consumption - Considerable reduction in radiant and convective heat loss - Significant reduction of the labor time for the production - Not specialized skilled workers requested - Fast production times - Increasing of the material turnover - Excellent surface finishing thanks to fss system - flat & shine surface system The System is Composed of: - Power & Control Cabinet - Loading zone of the ingot molds - Heating body for the melting of the metal grains or scraps in the ingot molds - Solidification zone - Cooling zone - Unloading zone of the ingot moldsCoining, Bar & Ingot MakingMinting MachinerynewZ44_015Italyhttps://www.goldmachinery.com/listings/6643922-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-silver-cast-barshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55403c84b04439ddd4e509a1b4905100/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d8ed7de3789ab0f6a069f09a0eb2aac/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a552bcc2ec3b1db41390d5339383f5d/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53897c912087dcb4bcf1c43f95653276/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d4aabf32a26e25807eb5b93ea6bc8501/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cee0148364fb33ad12008b687e0192c5/original-new-ikoi-flameless-tunnel-continuous-induction-system-for-production-of-gold-and-silver-cast.jpg2025-01-08 14:22:24 UTC66474572000MeilinkSeries Gibraltar0About section TL-Rated Composite Safes have the ability to withstand severe attacks by experienced U.L. experts using powerful tool such as sledgehammers, power saws, carbide disc cutters, drills, etc., and without fail, were awarded the U.L. TL-30 labels. Besides withstanding the most concentrated attacks by sophisticated burglars, TL Safe offers a 2 Hour, 350°F factory rating, ensuring the protection of the vault’s contents against intense firesMiscellaneous MachinerySafesused779451Pawtucket, RIhttps://www.goldmachinery.com/listings/6647457-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl30MeilinkTL-30A4035723" x 23" x 64"31" x 30" x 71"3,218 LbsLS3 Adjustable Shelveshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/692d00e79f1747e52ae9951000039bf7/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35e9dbfac1f47a804927a1d8e0cffde7/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a63d9135d57526b732f6bad47ad07f75/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0684d4cb1eb90dcca520ce6222b8c7a/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c9d7ef51bf99260776fe06f112ab53bb/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbe7586aa3ae9517a74bdf2155d378ee/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b372f736ec32bd8824ad9897943575c9/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f71c22df90aa304b010e7709135f5e53/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d233ae04c05aed2bf082352dfbd70311/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0e17d85be3488c4ce6cee69d288892ee/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d0697161a25e1f81ee1afa1011cf5e4/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1db0b22657b155f2ab209d363ffffa96/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/114ddd14c8818aef79d50512e70ec305/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/49f7cb6bf5773b08b5afbe4979e4cc4e/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/56440f574ed357a09a510875f241b453/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a843078f58cc7acda4c7a131dc134ae/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b345e86e9322400960bf0d2da3a28ffd/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d05ba88276e6cd1bb52f9b0e970b9911/original-used-meilink-combination-floor-safe-series-gibraltar-fire-burglary-tool-resistant-tl-30.jpg2025-01-10 14:04:00 UTC6647470Swaziland0About section TL-Rated Composite Safes have the ability to withstand severe attacks by experienced U.L. experts using powerful tool such as sledgehammers, power saws, carbide disc cutters, drills, etc., and without fail, were awarded the U.L.Miscellaneous MachinerySafesused779452Pawtucket, RIhttps://www.goldmachinery.com/listings/6647470-used-swaziland-combination-fire-tool-resistant-security-floor-safe-tl-15-group-3960 Degrees C / 1760 Degrees FTL-1522" x 22" x 52"19" x 22"33" x 29" x 71"2,211 Lbs3 Adjustable Shelveshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9932d91f5f23fafa1b70ae8fd0060c58/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b8824d5aead2623441f658520107748/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/907d1a96c2356bc370ba79bf3c0f75c9/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc6790010797cda6e4aeec108210e459/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9203f2d38fdbd0536d0c4b45225e1ea1/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/536eccdac9522bec3ad616c572d21afe/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d75f1509d4c868c664025533dde9b91/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8492105dd1e2e9ef49112441b9859b89/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3019c93b2de8b1c3cc5cd9068242ede0/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/512dbfad3c56ed5331b0eb112fcc120b/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce02943334b5e8b1bf9a4715e25a39fe/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/73d916f3ab5fbc17b8ead0d30e5461e0/original-used-swaziland-combination-fire-and-tool-resistant-security-floor-safe-tl-15-group-3.jpg2025-01-10 14:11:58 UTC66836682025N Ferrara50-KG-10Wire, Plate & TubeMelting & Continuous Castingnew779453Pawtucket, RIhttps://www.goldmachinery.com/listings/6683668-n-ferrara-horizontal-continuous-casting-machine-50-kg50 KG4" (100mm)50 KG PER HOUR208 / 220 / 240 50-60 CY.401101260º C (2300º F)Heavy duty HR steel construction with removable top.The heating element is constructed of silicone carbide. The element is designed to provide trouble free life. The element has a unique design the easiest and shortest way to replace. (normal replacement time is 15 min. with Furnace HOT)The furnace chamber contains multiple courses of high quality refractory and thermal efficiency.Internally the Furnace operates under atmosphere inert gas. This will minimize oxidation of graphite crucible and die.Multi Zone heating system for better heat curve accuracy.Microprocessor temperature control with time proportion and cycle rate calibrated for Type K thermocouple 0 to 2,300º F for close line control. (includes HI-Limit safety)Will be equipped with all necessary switches and controls for efficient operation. The panel will be wired and instruments will be tested before leaving our plant.Cooling system specially designed pressure less cooling chamber including prevision flow meter control to monitor accurately the cooling and water temperature gauges with micro-processor control to activate the alarm system. Water pressure control is also interfaced with the alarm system.The withdrawal mechanism is designed with mechanical and hydraulic interface. The motor drive is controlled electronically with processor pulse.Manufacture from high purity. Graphite is machined to precision tolerance.Casting Dies are precision manufactured from high density graphite.60" L x 40" W x 48" H2800 lbs. (1270 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d69d843ec89b970f74ccf76620a9b896/original-n-ferrara-continuous-casting-machine-50-kg.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8793c18b05e2661868f2c325c202b93b/original-n-ferrara-continuous-casting-machine-50-kg.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cccaf5f8897c3b3b3872b40138972328/original-n-ferrara-continuous-casting-machine-50-kg.jpg2025-01-30 20:11:00 UTC67602712025IKOIZ90The all new IKOI UltraBite System allows you to reduce 1000 oz bars and/or Dore Bars into small pieces which allows you to skip the melting/graining phase. It can also be used for dore bars before going in chemical process to accelerate the acid attachment. The UltraBite is new patented technology from IKOI to mechanically "destroy" 1000 oz Silver bars to create mechanical shavings. Characteristics of the Machine: - Welded, stretched, sandblasted painted carpentry structure including basement - Machine body shoulders thickness 50 mm - 2 lateral motorized rollers for loading of the bars in the cutting area. Each side is supplied with a mechanical/pneumatic pushing system for inserting the bars in the cutting area. Bars are loaded manually on the left & right roller. Each roller can contain up to 4 bars. Ultra Bite takes around 15-18 minutes to shreds 1 bar for each side (it means 2 bars every 15-18 minutes) (totally 6 doré bars in an hour) - Special machining wheel in tempered steel with surface hardening (patent pending) - Cooling air injectors - Motorization with adjustable speed by inverter coupled to the cutting wheel by belt transmission on the flywheel - Special interchangeable mobile plates series for cutting precious metals (patent pending) - Mechanical pushing device of the shredding bars with adjustable speed operated by hydraulic cylinders and hydraulic power unit - Counter cut with interchangeable fixed plates - Hydraulic press device for blocking bars during machining, automatic adjustable adapt to various bars sizes from 30 mm to 100 mm - Special discharging scrap/waste system on each side of the machine (left and right) - Collection funnel and discharging shavings - Electric cupboard and control cabinet with SIEMENS touch screen HMI panel - Housings, safety panels, openings, sensors, and safety devices according to CE standards - Instruction manual according to CE Standards - Machine works in autonomy for 1 hour Process Description: - The operator loads, on the motorized rollers (left and right), the bars to be treated. - Each roller can contain 4 bars each side. - When the first bars (left and right) arrive to the cutting zone, a mechanical pushing device is pressing the bar against the tools for shredding. - The machine is composed by two independent lines, each one with a production capacity of 3 bars per hour - When the bar, for each line, arrive at the end of the stroke, the lateral pushing device moves the bar into the central position (point “A” and point “B”). At this moment the mechanical pushing system (P) presses the bar against the shredding tools. At the end of each bar process, a ~10% thick waste/scrap remains which is ejected automatically from the lateral ejection system and goes to a lateral box separated from the shavings of each bar. Said waste/scrap can be picked up manually by an operator in the collection tray under the machine at the end of each bar and must then be managed separately (for example, it returns to the foundry), or said separation takes place automatically in the case of ULTRA BITE is equipped with a vibrating sieving table, which is specifically designed to collect the shavings from underneath the machine and separate the shavings from the waste/scrap by means of vibration, and then in any case said waste/scrap must then be managed separately.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779454Italyhttps://www.goldmachinery.com/listings/6760271-ikoi-ultra-bite-model-z90-for-shredding-silver-bars480 Volts / 3 Phase / 60Hz~20Kw~15KwDore Bars, 1000 oz Silver GD BarsDorè Bars with different height (30 mm -100 mm)From 250 to 350 mmFrom 60 to 150 mmUp to 6 bars per hour (3+3)6-8 bar10-40 °C70% @ 25 Degrees C Temperature126" x 67" x 71" H5,500 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/194cb5d0a77d216afa15f9511f2d3c70/original-used-new-ikoi-ultra-bite-model-z90-for-shredding-silver-bars.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5e4da8a2ae877af67937bdfedd7a3ec6/original-used-new-ikoi-ultra-bite-model-z90-for-shredding-silver-bars.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7a33903b27781820471feb5d51bb6f0/original-used-new-ikoi-ultra-bite-model-z90-for-shredding-silver-bars.png2025-02-07 15:12:52 UTC67603012025IKOIZ95-124The IKOI Density Booster is the new patented technology from IKOI to create mechanical granules or sand from silver shavings or silver crystals. The mechanical granules and the sand have the same density as silver grains! The operator will feed the hopper, positioned on the floor close to the Density Booster, with silver crystal. It is important that crystals must be with a moisture less than 1-1,5% and with a minimum specific weight of 2,2 Kg/dmc. The ground hoper is supplied with an auger for transferring automatically the crystals to the Density Booster. The feeding system is automatic and calibrated for providing a regular quantity of crystal inside the Density Booster insertion vessel located at the entrance of the machine. This device is important to avoid the stockage of the crystal inside the rotating system. At the exit of the machine the silver crystal is transformed into silver sand with a density almost double the density of the incoming material With the density booster the shavings from the Ultra Bite® are transformed into mechanical grains. The density booster® is a mechanical processing machine to increase the bulk density of silver shavings and crystals. The equipment is a rotating unit which is capable to compressed the material into spherules. Using this technology, the bulk density increases and the material is easy to handle, weight, dose and load both manually and with automated systems. Description of the Density Booster: Plant is built from two parts: - Main machine that does the compression of the material (increasing the material density) - Bag filter for filtering the air generated by the centrifugal extraction fan The main machine, that performs the increasing of the material density, consists of: - Welded stretched, sandblasted painted carpentry structure including basement, equipped with soundproof panels - Feed funnel for the material to be compressed - Two-stage compacting rotary element with variable speed - Material extraction centrifugal fan - Decanter cyclone with outlet channel for the compacted material - Rotary valve - Vacuum pipe from cyclone to centrifugal fan - Suction pipe from rotary compaction element to the cyclone - Exhaust pipe to bag filter - Electrical command and control panel The bag filter for filtering the air generated by the centrifugal extraction fan consists of: - Welded, stretched, sandblasted painted carpentry structure including basement - Two antistatic sleeves - Pneumatic cleaning of the sleevesCoining, Bar & Ingot MakingMinting Machinerynew779455Italyhttps://www.goldmachinery.com/listings/6760301-ikoi-density-booster-model-z95-124-to-produce-mechanical-grains480 Volts / 3 Phase / 60Hz~15KwPure silver crystals coming from electrolysis (moisture max 1-1,5%, minimum specific weight 2,2Kg/dmc)~180-190 Kg/h~5,0-5,5 Kg/dm³~10-40 °C70% @ 25 Degrees C Amb.1,100 Lbs139" x 47" (LxW)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4328e5db953c158cf9d14bae99cf0af2/original-ikoi-density-booster-model-z95-124-to-produce-mechanical-grains.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e9844207eff83541fb1bd9d93e06c41b/original-ikoi-density-booster-model-z95-124-to-produce-mechanical-grains.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6f9e2e38f396d91b6cb55f4e75c13a6/original-ikoi-density-booster-model-z95-124-to-produce-mechanical-grains.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42b47a3700082bf98fa6877e10190f03/original-ikoi-density-booster-model-z95-124-to-produce-mechanical-grains.png2025-02-07 15:25:18 UTC67603572025TVNTRC/EXMachine Features: - Machine made for twisting any type of chain thanks to the following features: - Chuck rotation in both senses from 0 to 400 r.p.m., foot-pedal control. - The chain can be drawn by pneumatic piston adjustable under pressure according to the kind of chain. - Adjustable distance between the two chucks from 0 to 1500 mm. (on request different) - Zero setting revolution counter. - There is the possibility for linear twisting of chains from coil. - Construction standards in accordance to “CE” with respective documentation. Technical: - 8 ATM - DOUBLE PISTON FOR DOUBLE FORCE - ADJUSTABLE LENGTH OF CHAIN TORQUE SECTION 0 / 1.5 MT. - SPEED VARIATION. - 0/400 RPM - FOOT CONTROL INCLUDING TACHOMETER.Chain Making/ManufacturingWire-Drawing / Bull BlocksnewTRC-EXItalyhttps://www.goldmachinery.com/listings/6760357-tvn-model-trc-ex-chain-twisting-machineUpon Request1.5 Meters100 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e22152a9f3f8b643c2240daa60c10be6/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/43f3684b9924fa2288f374cd340bb966/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6f9da4e3c0f7ad45dde85995aa256a0/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b12bd62d7369921cf7803bd20fa9c3c/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/25b92e046346e93cf1a5fb5558942633/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99d60edb46c87e8d5dd5b384b3595149/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/57225ddfb17c5398812671636fc986d5/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6534def1fd53333af5a9e03896ff440/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce6e774408c96823d6a3dfe9e4604f72/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a92edcdb58caa8bcb9f5560e6e40389c/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a930e016bec836fb106f353937ed78cf/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8776723258e5203382569b01688d5f5/original-tvn-model-trc-ex-chain-twisting-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfc905da2358c581ba5fe38258cbb2a4/original-tvn-model-trc-ex-chain-twisting-machine.jpg2025-02-07 15:57:40 UTC69493192025IKOIZ06_200 2T0GENERAL DESCRIPTION OF THE DOSING MACHINE The machine has been projected in order to automatically weight precious metal grains and dosing it in suitable cups. The dosing machine is composed of two automatic weighing lines: -both heads with a maximum productivity of 100/110 weights of 1000 g Au or Ag/hour each. The dosing plant is composed of the following parts: - Sturdy painted frame - Recovery hoppers for the inlet material (grains) - Lines of pre-weight - Recovery hoppers for pre-weight - Lines of final weight - Finishing cutter - Cups for the final weight extractable from the plant - Check electric panel - Instruction manual The parts in contact with the precious metal to weight are in stainless steel AISI 304. Each weighting line can work independently. The machine is equipped of operator panel where it is possible to memorize the working parameters and up to 20 programs for each weighing line. The final weight is made on precision loading cells METTLER. Productivity - Two heads for weighing from 1 Oz up to 1 kg gold or silver with productivity of 100 pc/h 1.000 g Ag-Au and precision -0,00/+0,02 g In order to reach the requested weighting precision, the final weight is reaching by adding gold or pure silver calibrated wire. Description of the Machine: The dosing machine Z06_200 2T is used to weight gold and silver grains, by obtaining calibrated weights according to the operator setting. The plant is composed of 4 working areas: 1- Grains loading zone In this zone the operator loads manually on the hoppers the grains to weight. The superior hopper allows to work independently for about 100 weights of 1000 g Au and for about 50 weights for 1000 g Ag. 2- Pre-weighing zone The loaded grains on the superior hoppers is moved slowly towards 2 vibrating channels for each line which supply the pre-weighing tanks. On the left side, you can see the 2 vibrating channels (a roughing one and a finishing one) of each line; on the right, the grains emptying on the tanks. The grains is weighted and the system prepare a pre-weighing near to the one set from the operator. Once the correct weight is reached, the grain is discharged in a parking hopper. When the pre-weighing tanks are discharged, the system prepare another pre-weight ready for the following cycle. 4-The finishing zone of the weight From the parking hopper, the grains are moved inside the cups of final weight. In this zone, the weight of the metal discharged from the superior hopper is checked, the quantity of the metal to be added is calculated and the cutter to add the wire necessary to reach the exact final weight is actuated. When the final weighing is finished, the taking door automatically opens and the operator can remove the cup with the metal inside and place another empty one. The operator is informed from an acoustic signal of the weighing’s end and if the weight is within the tolerance or outside. When the operator places the new cup, the cycle starts again. When the cup is introduced, the system surveys the tare, allowing to work also with more cups. Description of operator panel In the operator panel, can be managed all the working parameters of the plant. - Setting of the pre-weighing weights - Setting of the speed of the vibrating channels of pre-weighing - Setting of the weights of the final weighing - Setting of the cutting parameters of the wire - Setting of the weighing’s tolerance parameters - Setting of the material’s discharge times - Visualization of the plant’s alarms - Manual management in maintenance function of all the movements of the plant Instructions Manuals Complete manual will be provided covering following aspects: - Complete installation schematics and instructions. - Operational details. - Mechanical and electrical schematics, wire diagrams. - Maintenance manual with parts replacement data and troubleshooting details. Manual will be in English language Use and Maintenance Manual. Every machine is supplied with an English hard copy of: - Electric, pneumatic scheme; - Use and maintenance manual. Security devices according to the Machine Directive 2006/42/CE The machine with be equipped with an automatic system for the grains’ loading in the superior hoppers. This system allows to load the grains from the ground, in suitable hoppers, avoiding the lifting of the material directly over the machine. The system is composed of: - One or two loading hoppers from ground (two hoppers if you desire to work simultaneously with two different metals) in stainless steel, equipped with two wheels for a simple positioning and transfer of the material complete of grains’ suction tube. - A rapid opening cover is placed on the hoppers basis to allow a fast recovery of the material not used. - One blower used for generating a depression inside the suction system. - Electric and pneumatic supply of the blower separated from the dosing plant. - Two grains receivers placed above the machine properly insulated to avoid the transmission of vibrations to the machine. - Check system equipped with operator panel to set the working parameters. Functioning of the automatic loading system: - The automation is independent from the dosing machine and is foreseen with a separate check system of the material’s level inside the system. - The grains introduced inside the hopper on the ground is aspirated through a suitable antistatic rubber tube and moved upward above the dosing machine. The suction tube inside the hopper on the ground allow to regulate the grains flow through a simple regulation. - Above the hoppers of the dosing machine there are the receivers of the grains and, according to the suction times set, they discharge the grains inside the hopper of the dosing machine. - The receivers are equipped with filter to avoid the grains to reach the blower. - When the load of the hopper is reached, the grain aspiration is interrupted until a new grains load is requested. - The suction system is equipped with a suitable paper filter to survey any aspirated metal powders. - If there are no more grains inside the hoppers on the ground, after same lifting attempts, the suction is interrupted and it reports an alarm. - With this system, the loaded material is reduced and only the necessary is loaded.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779456Italyhttps://www.goldmachinery.com/listings/6949319-ikoi-automatic-dosing-weighing-machine230V / 3 Phase / 60Hz2 KwGold Au 999,9 – Silver Ag 999,910 L100 kg for each line50 kg for each lineØ 2-3 mmØ 0.5 mmDIN1251.000 g for each line100 weighing/h x each line 1000 g Au or Ag, 15 weighing/h x each line 100 Oz Ag6 bar270 Nl/h~1.000 Kg~1.000 x 2.200 x h 2.100 mm10 ÷ 35 °CMaximum 5°C in 2 hoursmin 30% max 70%https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac338ce34f2068bdf675efcfb5522cf1/original-ikoi-automatic-dosing-and-weighing-machine.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e27887ff0a33d7121c2a64e2e5e1c506/original-ikoi-automatic-dosing-and-weighing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5fb8907f91b4a17847c0df5c3c6bc2e/original-ikoi-automatic-dosing-and-weighing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1f6dc00dd9ce8107d2758f9e84cda11/original-ikoi-automatic-dosing-and-weighing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/440f07f1f50486aa6d7927d84f5e1303/original-ikoi-automatic-dosing-and-weighing-machine.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c82b0af6e4f5f73a0c2c0bb3466af85/original-ikoi-automatic-dosing-and-weighing-machine.jpeg2025-03-05 14:05:56 UTC69691902025Baltestri Technologies SRLBT-ARG-AU-006-RPPThis refining plant is for gold alloys up to 6Kg capacity of input material per batch. It represents a versatile model of refining unit: - Refining alloy by aqua regia with Au min. 65% and Ag max 15% content - Refining low karat allow by inquartation PLEASE CONTACT US FOR A FULL QUOTERefining EquipmentGold Refiningnew779457Italyhttps://www.goldmachinery.com/listings/6969190-gold-refining-plant-6-kg-batch-rotative-suitable-for-aqua-regia-process-and-or-inquartationAccording to country of installationMin.: 2.5Kg, Max.: 6KgAu Min.: 65%, Ag Max.: 15%Min 999,5/100013kW2.600(H) x 2.700(L) x 2.000(W) MM https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9a2c1d454a5520ccb984d37e41457c24/original-gold-refining-plant-6-kg-batch-rotative-suitable-for-aqua-regia-process-and-or-inquartation.jpg2025-03-06 13:54:30 UTC69716271960Meuser & Co.0Equipped With - Quick production tool post - Tool Post, - Thread Dial - 3 Jaw chuck - 6 Jaw chuck - Swing down safety shieldToolroom & General MachineryLathesused25115779459Pawtucket, RIhttps://www.goldmachinery.com/listings/6971627-used-meuser-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric230V/3PHMOOL18"26"68"28 – 1250 RPM1-7/8″1/2 to 152 TPI0.5 to 92 MM120" x 42" x 60" H4,000 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bcec2c5e7ec01e525a50cc062c61c932/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/29c40af9649c5928643dd0076dab08df/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9e44665de10bd0e061bfe881288e99fc/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fffbcd8a0eddcde444d05d7a7d27fc48/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/830727c8146ec1dc50a5e81b1099c968/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94a95b49e46400edf09f9d25ab190103/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d940c2fc92fd9114fa1a8a5310ea6980/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/85e74b3a7570d20adf74239dc3866f72/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5743b634c000c3411874812673fec8e7/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a548ca8e0f9e6435abc29227f09c8426/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aea4f4f7734f8c58e54f3c7542255f71/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a10f4f5a274f7b5947643ab3c39c706e/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/afdcd5545ae2223f4bd6c4731f07af68/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1eb7b6274235d952fe80dc969d88218a/original-used-meuser-and-co-18-x-26-68-gap-bed-tool-room-engine-lathe-inch-metric.jpg2025-03-06 16:18:37 UTC6971637Model Master401A0Model Master CNC Engraving Milling Machine Controller using Flashcut Software Power Adapter & communicating Cables Tools & Cutters as photographed Jelenko (NSK Nakanishi ) Drive with a Spindle Motor Computer has pre-installed Flashcut software, ready to use Equiped with: CNC controller, computer, computer screen, keyboard, mouseCNC, Metalworking & ManufacturingCNC Machineryused779460Pawtucket, RIhttps://www.goldmachinery.com/listings/6971637-used-model-master-cnc-engraving-milling-machine-complete-with-pc-flashcut-artcam-software110 Volt / 1phase https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26557cdfc4a04e293527bcee9c4d7c42/original-used-model-master-cnc-engraving-milling-machine-compleate-with-computer-flashcut-and-artcam-.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68ed8c65244d982f846a8d3b57d6ffa5/original-used-model-master-cnc-engraving-milling-machine-compleate-with-computer-flashcut-and-artcam-.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c7f7e94f5e84f2fdea8ab0a8cc9fe4a/original-used-model-master-cnc-engraving-milling-machine-compleate-with-computer-flashcut-and-artcam-.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/606416a977552ea6b45ea10561ce9560/original-used-model-master-cnc-engraving-milling-machine-compleate-with-computer-flashcut-and-artcam-.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba4701537be9be456a98993c490d2fa8/original-used-model-master-cnc-engraving-milling-machine-compleate-with-computer-flashcut-and-artcam-.JPG2025-03-06 16:29:04 UTC69716791947J & S Tool MfgD0Radius/Angle Wheel Dresser Form master series Overall Box size 8" x 4" x 11" Weight 12 LBS Equipped with: Two 1/3rd Diamond tools Original box, Key and documentationToolroom & General MachineryTool Room Equipment & Accessoriesused779461Pawtucket, RIhttps://www.goldmachinery.com/listings/6971679-used-j-s-tool-model-d-the-form-master-angle-radius-dresser-with-2-diamond-toolshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca91173f1bd481a975e604888afb9ffc/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b6a88fc0b3ec74c118e913903b7d6c7c/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9eff19c4270da63dcda589656755914e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95d0af02c4efb34364979db74c31f714/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c8d470a61adef62ba20b167a863d7911/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/94287f3e79af802762b67213649913b3/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0545e6ca1bff74878ed3887262d8ee29/original-used.jpg2025-03-06 16:42:55 UTC69716900Toolroom & General MachineryMetal Workingused779462Pawtucket, RIhttps://www.goldmachinery.com/listings/6971690-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty220V/3PH/60HZ6".062"(1/16")1/3 HP190 strokes per minute23" x 17" x 44" high190 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/132ff53971e26dc1bd6bd34f1c4dd7cc/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd9e763efb1c31c05e115b487cc43749/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02c06ec533e89cd50c664005f490b59c/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50d38175b6b4b495b5deb965e975be0c/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9909d0aae13d91d67f808635c1dc4609/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpg2025-03-06 16:47:44 UTC73588840Our Burnout Furnaces are ideal for lost-wax casting, heating precious metals, and much more! Each unit includes a heat-indicating pyrometer and switches to allow flexible firing, plus pilot lights to signal when the kiln is "on" and a 6' power cord. Designed with a setter plate and front-loading plug door with heavy-duty hinges that helps to minimize heat loss, while allowing for easy use. To ensure firing efficiency and reliability, these kilns include a stainless steel case with a heavy-duty angle iron frame; interior walls that withstand up to 2300°F, an insulating fire brick, and back-up insulation that will neither pack down nor burnout during firings. *Please allow for a 3" clearance around your crucible or flask on all sides to allow the proper amount of air flow within the kiln. Solid state electronic temperature controls are available for all kilns.General Jewelry MachineryBurn-Out Ovens / Furnacesused779465Pawtucket, RIhttps://www.goldmachinery.com/listings/7358884-used-burnout-furnace-oven-kiln-20-x-20-x-20240V23" wide x 20.5" in diameter x 24" high28" wide x 30" depth x 49" high368640420https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9eb719155115922ca6fff55eceaa5ef/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d0e4b8699ffe958c541675f6e1c0555/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd49d8e3613bc692f6dc3201dd026152/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/177b68c7a0f4374e5a400e251eeb8c85/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83ef6330186db045aec6d26e81a5bc5c/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce50b7fcecbe4a8c902ff078c53d8517/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ff559002e3a35f217bd4f4a688e3567/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04299937d8a3ee4ce89e32ebe54ad966/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e962db506f5083d9c1a84527b7b7f601/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/514fd36cb3d9191532dc9f17a641cc52/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpg2025-04-04 20:46:16 UTC7376883H.J. Ruesch126 - 12D0Equipped with - Two Extra Sets of RollsWire, Plate & TubeRolling Mills, Powerused779466Pawtucket, RIhttps://www.goldmachinery.com/listings/7376883-used-h-j-ruesch-model-126-12d-4-x-6-power-breakdown-rolling-mill-for-plate4"6"Dual hand operated roll adjustmentsEntrance & exit tables52" x 23" x 57" high2,000 Lbs1.25"5 HP Gear driven https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a9191824db338c3103c3b27727945fcd/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1daf672015dc69cfe8490d9d48c9164c/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/278a00aaa6eee702b125b2b439645139/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/401620af5ddb01ad0f7ce5140ebee94f/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dac3d223ebda2b3da7a449bf3986a36/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c3c4feec94bc81726a55dd0b5bf6177/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e596c1086da9b808452620385f1e3de/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/632b4635d66f4073ba0a1d877aaf31f5/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be862438472c5e3bb32219449b5a9d64/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8697df53eccf11eee526c3f7dddd3619/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2c64b17ae8a820c40e89120604e6d294/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d0fcec546f2e1ddda50f7ffa96898a8/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5164cf10609a742b210e5f819b861e63/original-used-h-j-ruesch-model-126-12-d-4-x-6-power-breakdown-rolling-mill-for-plate.jpg2025-11-18 19:13:01 UTC7376889HarigSuper 6120EQUIPPED WITH: - 1-1/2 HP motor - Direct drive spindle - Tooled Steel Hardened Ways - O.S. Walker 6" x 12" Ceramax fine pitch permanent magnetic chuckToolroom & General MachinerySurface Grindersused779467Pawtucket, RIhttps://www.goldmachinery.com/listings/7376889-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612220V/3PH/60HZ6" x 12"12-1/2"7-1/4"12-1/2"6" x 12"7" x 1/2" x 1-1/4".0005".001"3450 RPM21" x 25" x 74" high640 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/782304485b888fbe90d33c274348d0fd/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a75e5efc73f34d42ed626a00823eea5d/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/018e22260d476c716f3c6ab9c7475dbb/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b29db4869af86841f184a1311a09d07/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/27d0ec52d6b017a8f8ca277da9a6cada/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b05760d23ec52dba96ea99be30dd1205/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae42f5fcc9f35dcecdea8c82f0ee79dc/original-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612.jpg2025-04-11 16:09:50 UTC7392128AB MachineryAB-1000AB-100 PLASTIC INJECTORSTANDARD EQUIPMENT INCLUDES: - DIGITAL TEMPERATURE CONTROLLER - TRANSPARENT SAFETY SHIELD - EASY VIEW LARGE HOPPER ASSEMBLY - AIRCRAFT SPEC ALUMINUM BODY INSULATED TO PREVENT HEAT LOSS THROUGH MAIN FRAME - Easy to read & adjust digital temperature controller - Aircraft spec. aluminum body - Easy view material hopper - Stainless steel injection chamber & piston for corrosion resistance - All pneumatic devices are of the “no-lube” design; ideal for medical & other clean room applications - Working area protected by transparent safety-guard and safety red heat shield - Right & left hand operation - Mold stop and ejector - Quick acting clamp for easy operation - Hardened screw & bronze nut for long wear.General Jewelry MachineryMiscellaneous Jewelry Equipment & Toolsused990285779468Pawtucket, RIhttps://www.goldmachinery.com/listings/7392128-used-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-base4,000 Lbs6 Grams (1/4 Oz)@125 PSI, 6333 PSI120 Volts, 50-60 HZ400 Watts2.5"7/8"18" x 21" x 25" High71 LBhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/114d698669f6e0d5123afba4024d8f68/original-used-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-base.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0408079413fff19dc314c30979901282/original-used-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-base.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce26f45ab24047c93338b0933eed809d/original-used-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-base.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/66a98729a903876bbe1b0926ef13582a/original-used-goldpro-ab-100-4-manual-plastic-injector-molding-machine-with-reinforced-base.jpeg2025-11-13 13:37:32 UTC73921402007YasuiSM10The optional Yasui Shotmaker makes clean and homogeneous shots (grain) for your next perfect casting before introducing metal to the crucible.Wire, Plate & TubeMelting & Continuous CastingusedA233779469Pawtucket, RIhttps://www.goldmachinery.com/listings/7392140-used-yasui-grain-maker-metal-shot-grain-creation-model-sm1Metal shot (grain) creationYasui K2 NEXTJapanhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48de71453977e9f3be59641ad3208819/original-used-yasui-grain-maker-metal-shot-grain-creation-model-sm-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bdaf313439d85d7d33d3efff267c6c2d/original-used-yasui-grain-maker-metal-shot-grain-creation-model-sm-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53ba5e0ff4ef493a7a90f1407bcabd42/original-used-yasui-grain-maker-metal-shot-grain-creation-model-sm-1.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63a59a9092f3bb3f974ec9dcab26be7b/original-used-yasui-grain-maker-metal-shot-grain-creation-model-sm-1.jpg2025-04-18 14:59:42 UTC7392146Harig6120EQUIPPED WITH: - 1-1/2 HP motor - Direct drive spindle - High Speed Steel Hardened Ways - O.S. Walker 6" x 12" Ceramax fine pitch permanent magnetic chuckToolroom & General MachinerySurface Grindersused779470Pawtucket, RIhttps://www.goldmachinery.com/listings/7392146-used-harig-super-612-hand-operated-6-x-12-surface-grinder-model-612220V/3PH/60HZ6" x 12"12-1/2"7-1/4"12-1/2"6" x 12"7" x 1/2" x 1-1/4".0005".001"3450 RPM21" x 25" x 74" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/84640094e02df142072dc271be578e3a/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/35716ed32d866bca0765f4a631f3caba/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f8c0d0d0dd177bfe98835593b7ef4f2c/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2823ebbd919a1f71ea69c9f535427750/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a8d404d59239af668345f0f11b430cb/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f0b90b6d830ce07c6ddd7fca9823d9a/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/59d7c531dea6d590ef1485a0339e401b/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c06cfe770a0012cbae3c8df5b3073c32/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/97bcc6a7a2ba86dee29aa04e0d19894d/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ac9167c325e0d948a72dc5d34137862d/original-used.jpg2025-04-18 15:08:15 UTC7417042South BendCL 8140 C0Equipped With - 5c Collet holder - TailStock - Thread dial · - Heavy Duty stand - Qty (1) 3 Jaw chuck - Qty (3) 4 Jaw chuck - Qty (3) deadcenter's - Taper attachment - Jacobs drill chuck - Tool post ring and rocker - Tool post holders and cuttings, as photographedToolroom & General MachineryLathesused779471Pawtucket, RIhttps://www.goldmachinery.com/listings/7417042-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl8140c-w-taper-attachment-tooling220 volt 3ph 50/60 HZ18"38"6'Threaded1-1/2"48- 4 to 224from 4 TPI1800 LBS80" x 40" x 60"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dce091683650729323a51c5f1f56151/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ffb0a22f9d9b0de2b911de1041fd6999/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ce3ddc6847dd683a36a1669bd46a1ac/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/64e3b7b665ac1605fed143909185ca1a/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed99ec12372a6996e0dca96830619e1b/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6ac14995be06db181db61c6f85205f3a/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9163bfb5d2e785f603c672ae444d8991/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b48d6031e05edd28e560711271f53d7/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3d32c2d14e124b9b311b4b9da51991bf/original-used-south-bend-18-x38-heavy-duty-precision-lathe-model-cl-8140-c-w-taper-attachment-and-too.jpg2025-04-28 14:43:05 UTC7436778Littell30Toolroom & General MachineryPressroom Equipmentused779472Pawtucket, RIhttps://www.goldmachinery.com/listings/7436778-used-300lbs-littell-model-3-motorized-coil-reel-uncoiler110 Volt / 1 Ph / 60Hz300 LbsYesManual1/4 HP32" x 32" x 50" H350 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7279da71112af7373f5efcfa1f96217a/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ae5fe8209d1664b0af8b3724c5f4254/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be5ec1cd03c76209670bbcd2281c0ea3/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ebf40cb6f2884672b0f142ce82912cee/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02099557cd0f899e756ed4acf1c39f4b/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/91870e749ffc66a52db489f782baf4ed/original-used-300-lbs-littell-model-3-motorized-coil-reel-uncoiler.jpg2025-05-06 14:47:33 UTC74589212025OMBIF1L - F1/TL0The machines can produce chains with wires round, double, half round, flat, etc Compact wire flattener L50 to change round wire in wire half round, triangoular, etc. in option. Links can be laser welded. Simple changing of wire size. The F1L and F1 / TL are complete with: - multi language touch screen panel with machine controls and diagnostic alarms - rolls unit for wire rolling (in option) - laser connection (in opzione) - laser welding unit (in option) - automatic lubrication system - CE certificationChain Making/ManufacturingChain Making Machinesnew779473Italyhttps://www.goldmachinery.com/listings/7458921-ombi-automatic-machine-for-the-production-of-cable-rolo-double-wire-side-cut-cable-chain0,25 - 1,80 mm170 max50220 V/50-60 Hz0,75 kW135/215 kg160 x 85 x 75 cmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/02e980f9db28b527abeebabf6f6bd582/original-ombi-automatic-machine-for-the-production-of-cable-rolo-double-wire-and-side-cut-cable-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a1365a9ce253506ef70aa4236f8720e2/original-ombi-automatic-machine-for-the-production-of-cable-rolo-double-wire-and-side-cut-cable-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5a6dd9cf47882230b326845f72eafe7/original-ombi-automatic-machine-for-the-production-of-cable-rolo-double-wire-and-side-cut-cable-chain.jpg2025-05-15 14:36:07 UTC74796172025Durston1196Durston’s Powered Draw Bench (DDB 1800 Power) has the same specification as the manual tool benches but, in addition, offers an electric variable speed motor for simple drawing. The bench can draw 1350mm and benefits from a robust 0.75kW motor providing both forward and reverse gear. The unit also has a cast-iron gearbox and a nearside operation. The unit also benefits from two emergency stop switches at either end of the bench. The bench weighs 82kg and can draw wire up to 10mm. The bench is manufactured to the highest standards and is designed to last a lifetime.Wire, Plate & TubeWire-Drawing / Bull Blocksnew1196Pawtucket, RIhttps://www.goldmachinery.com/listings/7479617-new-durston-goldpro-powered-drawbench-1800mm10mm1900mm x 350mm x 800mm82Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39dbddf5003a2ffa2291fcc8ceeaa5d9/original-used.jpg2025-05-23 16:36:17 UTC75007722005Goldwasher0This patented automatic hand-wash sink solves the problem of precious metal recovery contained in processing waters (wet tumbling) as well as from roughing, finishing and personal cleaning operations of workers. Goldwasher's special system recovers metal through inexpensive cartridge filters which can be easily replaced and burned to reclaim the precious metals. A powerful 110V, 60 Hz motor pumps water through the system at a rate of 30 liters per minute (The perfectly watertight covered tank and the Goldwasher's quick filtering provide the added benefit of eliminating liquid stagnation and those accompanying odors. Goldwashers are built entirely of stainless steel and corrosion-resistant material. Chrome-plated taps for hot and cold water. All models feature an indicator gauge for filter replacement. Equipped with: - 1 New filter cartridgeMiscellaneous MachineryMiscellaneous Machineryused779474Pawtucket, RIhttps://www.goldmachinery.com/listings/7500772-used-gesswein-mdm-goldwater-2-r-the-goldwasher-2-tap-sink-for-gold-recovery110v 1PH 60 cycle All are double hot/cold35" x 18" x 44" H31.5" x 12" x 5" H235 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0b66412442ca3bb3edeaef67a5d86de/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92dbcd00e6b107d59a4fc6eb4b841522/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55a77903dbd2eeefa2a74732e80725cb/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a48b44682bf77172a2cf1be408c395d6/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ddc8f01e6c21688bbeb06a3eb7bb7a00/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/329e7a6367133441d9ea5ee6ae053299/original-used-gesswein-mdm-gold-water-2-r-the-goldwasher-2-tap-sink-for-gold-recovery.jpg2025-05-28 19:44:24 UTC7500781BarkerPM0Equipped With: - 1/3 HP Motor - Air Hydraulic Feeds - Cabinet BaseToolroom & General MachineryMillers, Verticalused779475Pawtucket, RIhttps://www.goldmachinery.com/listings/7500781-used-barker-horizontal-production-mill-model-pm-with-cabinet-base-pneumatic-feeds115V / 1Ph / 60Hz4" x 12" W x 1/2" T Slots5"3"3"3C collet taper1/2"22" x 24" x 18-1/2" H175 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65d5f006d02164b55b80fca5f7adad46/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5f2a873c4363adfdf755bea8b47da51a/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8663398256f24c6cce60366453312496/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf7e3426816dd4252c0f8be18dedec97/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/187d3f0612f9691ef368cc9a6ea74689/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4e87e2f821c14e85af28e654d531ff3/original-used.jpg2025-06-03 11:58:02 UTC75029200Floor ModelGeneral Jewelry MachineryChain Making Machinesused7202-100Pawtucket, RIhttps://www.goldmachinery.com/listings/7502920-used-fasti-model-cs-end-cap-machine-for-herringbone-chain115V / 1Ph / 50/60Hz4mm end cap for Herringbone chain.180" X.015"20" x 16" x 51"675 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8c7f0ecd80e256478b8414f4789248d8/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe85d5f6364307e8425a83b366dbc735/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eef89c2aa8fcf2e3a35179138c257f10/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f9ae66cbf14f51f206d3c981fa7b0dc7/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a3f7711aa9c5404e5689effa629caa2/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f2edd45e99c0f86fc50d783b219a6d7c/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4a56e0d3f0342f87addeacba886e651d/original-used-fasti-model-cs-end-cap-machine-for-herringbone-chain.jpg2025-05-29 20:26:04 UTC75412562025Varini1305/CEWire, Plate & TubeWire-Drawing / Bull Blocksnew1305CEItalyhttps://www.goldmachinery.com/listings/7541256-new-varini-model-1305-ce-400cm-motorized-draw-benchSingle-phased or three-phased motor HP2 (max)1,300 Kgmt. 6/m’ (approx.)350 CMCarriage400x60x118 CM (mod. CE)210 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7ee5b9e9c45b3b11fdb3d4ae6e1f56fd/original-new-varini-model-1305-ce-400cm-motorized-draw-bench.jpg2025-06-06 17:02:26 UTC76900992025IKOIZ55-3100Plant for the production of gold and silver grains with melting and casting in a cooling tank with protection in a controlled atmosphere. The material to be melted is placed inside a graphite crucible and when the melt is reached it is poured into a tank containing water to create grains. The crucible is equipped with a pneumatically controlled stopper managed directly by the operator. A temperature probe detects and monitors the melting temperature. Melting and casting of the metal in water are carried out in a controlled atmosphere. From the tank, through a collecting basket, the metal produced is taken manually by the operator. The machine is equipped with a microprocessor controller for the control and management of the working temperature and of the heating power. A newly developed electronic power generator allows: - energy saving by having low losses - precision in the control of power - noiseless - small sizes The plant is built according to CE regulations. Power and Control cabinet: - 10 KW medium frequency power generator, made with high quality electronic components, lowleakage passive components, oversized static power components, rigorously tested electronic control circuits - Passive power components for the resonant induction circuit, composed by medium frequency power low-loss condensers and medium frequency power transformers - Electric, electronic components - Control panel with display, from which is possible to control the working parameters: - Melting temperature - Real temperature - Melting generator power - Real generator power Loading zone: - The metal loading area is located at the top of the melting head, and can be reached by lifting the front part of the cover. Induction melting head with crucible: - Melting head in insulating material - Crucible closing lid - Graphite crucible for melting metal with appropriate insulation in ceramic material and external - jacket for maintaining the temperature - Heating inductor - Crucible and metal protection gas injectors. - Regulation with flow meter of Nitrogen gas protection flow - Manual regulation of the LPG protection gas - Safety guillotine at the base of the melting head Casting zone: - Graphite die with holes for the passage of liquid metal - Removable die from the crucible - Closure stopper of the die with pneumatic control - Melting temperature reading thermocouple inserted in the closing stopper Granulating water tank: - Stainless steel cooling tank - Tank capacity 130lt - Manual collection basket for produced grains - Removable tank installed on wheels with interlocked presence sensor for easy cleaning - Arrangement for recirculation pump connection Unloading zone: - The grains collection basket is lifted manually and the material produced can be removed from - the system. Note on the gold powder which is fed the crucible of the graining machine: The gold powder which is fed with the crucible of the graining machine must be washed, rinsed and dried in a way that when placed inside the crucible is free of moisture. The value of maximum humidity content in the powder should be of 1.0% max. Instructions Manuals - Complete manual will be provided covering following aspects: - Complete installation schematics and instructions. - Operational details. - Mechanical and electrical schematics, wire diagrams, water diagrams. - Maintenance manual with parts replacement data and troubleshooting details. - Manual will be in English language - Use and Maintenance Manual. Every machine is supplied with an English hard copy of: - electric, hydraulic scheme and pneumatic, where required; - use and maintenance manual Notes regarding the diameter of the produced grains: The produced grains is not perfect spheroidal shape, with variable diameters depending on the exit holes of the die. The diameter of the grains drops varies according to the dies’ wear. If the die is worn and the diameter of the holes is no longer as it was originally, the diameter of the drops may vary. With a good state die it is possible to guarantee a diameter variation of about +/- 1.5mm for 80% of the produced grains. Example: 10Kg of Au999 grains with an average diameter of 4.5mm will give about 8Kg of drops between 3 and 6mm and the remaining about 2Kg in grit with a diameter of higher or lower.Coining, Bar & Ingot MakingGrain MakingnewZ55-310Italyhttps://www.goldmachinery.com/listings/7690099-ikoi-graining-furnace-model-z55-gold-silver-10kg-to-35kg-capacity400V – 3 phases - 50 Hz11 kW~6 kHzGold Au 999 – Silver Ag 999130 lDemineralized Water14 kg8 kg~1,250°CNitrogen0,5 ÷ 1 bar~1,5 m³/hLPG30mBar6 bar0,2 Nl/h(Min – max) 19÷21°C5°C~1.3 m³/h~230 Kg~740x1.248xh1.435mm~ 0.1m/s10 ÷ 40 °C70%https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b024271786ee057396f0d88264e865b9/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a4df414a39157b791e33e6f390fa3c6/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83590c53ab82d3905edebd9a65045caf/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6e229774be0502ab037c1224419c7e2/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6474fba2d4cfa90eb91cd0c7dd3cb9ef/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpg2025-07-16 14:23:05 UTC76913432025IKOIZ55-3150Plant for the production of gold and silver grains with melting and casting in a cooling tank with protection in a controlled atmosphere. The material to be melted is placed inside a graphite crucible and when the melt is reached it is poured into a tank containing water to create grains. The crucible is equipped with a pneumatically controlled stopper managed directly by the operator. A temperature probe detects and monitors the melting temperature. Melting and casting of the metal in water are carried out in a controlled atmosphere. From the tank, through a collecting basket, the metal produced is taken manually by the operator. The machine is equipped with a microprocessor controller for the control and management of the working temperature and of the heating power. A newly developed electronic power generator allows: - energy saving by having low losses - precision in the control of power - noiseless - small sizes The plant is built according to CE regulations. Power and Control cabinet: - 15 KW medium frequency power generator, made with high quality electronic components, lowleakage passive components, oversized static power components, rigorously tested electronic control circuits - Passive power components for the resonant induction circuit, composed by medium frequency power low-loss condensers and medium frequency power transformers - Electric, electronic components - Control panel with display, from which is possible to control the working parameters: - Melting temperature - Real temperature - Melting generator power - Real generator power Loading zone: - The metal loading area is located at the top of the melting head, and can be reached by lifting the front part of the cover. Induction melting head with crucible: - Melting head in insulating material - Crucible closing lid - Graphite crucible for melting metal with appropriate insulation in ceramic material and external - jacket for maintaining the temperature - Heating inductor - Crucible and metal protection gas injectors. - Regulation with flow meter of Nitrogen gas protection flow - Manual regulation of the LPG protection gas - Safety guillotine at the base of the melting head Casting zone: - Graphite die with holes for the passage of liquid metal - Removable die from the crucible - Closure stopper of the die with pneumatic control - Melting temperature reading thermocouple inserted in the closing stopper Granulating water tank: - Stainless steel cooling tank - Tank capacity 130lt - Manual collection basket for produced grains - Removable tank installed on wheels with interlocked presence sensor for easy cleaning - Arrangement for recirculation pump connection Unloading zone: - The grains collection basket is lifted manually and the material produced can be removed from - the system. Note on the gold powder which is fed the crucible of the graining machine: The gold powder which is fed with the crucible of the graining machine must be washed, rinsed and dried in a way that when placed inside the crucible is free of moisture. The value of maximum humidity content in the powder should be of 1.0% max. Instructions Manuals - Complete manual will be provided covering following aspects: - Complete installation schematics and instructions. - Operational details. - Mechanical and electrical schematics, wire diagrams, water diagrams. - Maintenance manual with parts replacement data and troubleshooting details. - Manual will be in English language - Use and Maintenance Manual. Every machine is supplied with an English hard copy of: - electric, hydraulic scheme and pneumatic, where required; - use and maintenance manual Notes regarding the diameter of the produced grains: The produced grains is not perfect spheroidal shape, with variable diameters depending on the exit holes of the die. The diameter of the grains drops varies according to the dies’ wear. If the die is worn and the diameter of the holes is no longer as it was originally, the diameter of the drops may vary. With a good state die it is possible to guarantee a diameter variation of about +/- 1.5mm for 80% of the produced grains. Example: 10Kg of Au999 grains with an average diameter of 4.5mm will give about 8Kg of drops between 3 and 6mm and the remaining about 2Kg in grit with a diameter of higher or lower.Coining, Bar & Ingot MakingGrain MakingnewZ55-315Italyhttps://www.goldmachinery.com/listings/7691343-ikoi-graining-furnace-model-z55-gold-silver-15kg400V – 3 phases - 50 Hz16 kW~6 kHzGold Au 999 – Silver Ag 999130 lDemineralized Water20 kg10 kg~1,250°CNitrogen0,5 ÷ 1 bar~1,5 m³/hLPG30mBar6 bar0,2 Nl/h(Min – max) 19÷21°C5°C~1.3 m³/h~230 Kg~740 x 1,248 x 1,435mm H~ 0.1m/s10 ÷ 40 °C70%https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b024271786ee057396f0d88264e865b9/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5a4df414a39157b791e33e6f390fa3c6/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83590c53ab82d3905edebd9a65045caf/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6e229774be0502ab037c1224419c7e2/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6474fba2d4cfa90eb91cd0c7dd3cb9ef/original-ikoi-graining-furnace-model-z55-gold-and-silver-10kg-to-35-kg-capacity.jpg2025-07-17 12:08:22 UTC7693333202539FL0The metal granulator is applied to produce various metal grains, such as gold, silver, K gold, copper, etc. The metal granulator includes three parts: the furnace, the water tank and the loading frame. The molten metal will flow through the pure graphite comes with multihole at the bottom, and the whole granulation process is protected by inert gas argon or nitrogen, which minimizes the oxidation of metal. The gold granulating machine & silver granulating machine are the most commonly used models. The metal granulator is equipped with an argon flow protection device. During the melting & granulation process, argon protection will be injected to prevent the oxidation of precious metals to the greatest extent. while if the customer plan to cast K gold grains, then we will recommend using vacuum granulating machine to prevent oxidation. click here to get more information about the vacuum metal granulator. We can customized different metal granulator for customers according to different metals, different capacities, and different production efficiency for each client, please inquire. Features: - The granulator is used to produce high-quality precious metal particles and alloy particles with uniform color. The finished beads have no oxidation, high density and no pores, especially good spherical surface, uniform particles and stable color. - The metal granulator comes with Inert gas protection system, which minimize the oxidation in the process of metal melting and casting, especially suitable for precious metals and alloy metals that are easily oxidized. It also reduce the loss of smelted metal and increase the life of the crucible. - Applied with the Intermediate frequency induction heating technology, rapid melting speed, it takes about 15 minutes to melt one batch, and the casting time is about 15 minutes, which means that you will get high-quality metal grains within half an hour. - The temperature can reach 1600°C, the granulation time is 20-30 minutes once, and the melting and granulation are completed in one. After the casting is completed, the pelletizing barrel is easy to take out. - Pure graphite crucible comes with quartz jacket as protect, the multihole design at the bottom can act as breaker to make the molten metal cast into grains, what is more, It only takes 5 minutes to replace new crucible which is very convenient for the operator - Special cooling water to prevent adhesion of metal particles and make particles more evenly formed. - Metal granulator melting chamber and water tank can be designed separately or as an integrated unit, if there is not enough space for the user, we will recommend the integrated unit, which takes up less space. - The detailed and complete self-diagnosis system and protection function ensure that the equipment failure rate is low. - After the melt is completed, the casting speed is fast, making the metal particles smooth and smooth without sand holes. - 2 Year Warranty A gold silver granulator is a specialized machine used to produce high-quality gold granules, which are essential for applications in jewelry making, electronics, and industrial processes. One of the key components of a gold silver granulator is the **graphite crucible with a stopper rod**, which plays a critical role in controlling the flow of molten gold and ensuring consistent granule production. Below is an overview of the structure and functionality of this system. 1. Graphite Crucible The graphite crucible is the core component of the gold granulator, designed to withstand high temperatures and chemical corrosion. It is made from high-purity graphite, which offers excellent thermal conductivity and durability. The crucible is responsible for holding and melting the gold or silver - Material: High-purity graphite ensures minimal contamination of the molten gold or silver. - Design: The crucible is typically cylindrical with a tapered bottom to facilitate the flow of molten gold. - Heating: The crucible is heated using an induction Heating furnace to melt the gold or silver at temperatures above 1,064°C (1,947°F). 2. Stopper Rod System The stopper rod is a precision mechanism that controls the flow of molten gold from the crucible into the granulation chamber. It consists of several key parts: - Rod Material: The stopper rod is also made from high-quality graphite or ceramic to withstand high temperatures and resist wear. If the material is easily contaminated by graphite, we will also use boron nitride material as the plug rod - Sealing Mechanism: The rod fits tightly into an opening at the bottom of the crucible, creating a seal to prevent molten gold from leaking. - Actuation System: The stopper rod is connected to a manual or automated control system (e.g., pneumatic or electric actuator) that allows precise adjustment of the rod’s position. This controls the flow rate of the molten gold. 3. Granulation Chamber Below the crucible and stopper rod is the granulation chamber, where the molten gold is transformed into granules. This chamber typically includes: - Cooling Medium: Water is mostly used to rapidly cool the molten gold droplets, solidifying them into granules. - Collection Tray: A tray or container collects the solidified granules for further processing. The granulator adopt the automatic lifting up tray to collect the granules, which can greatly reduce the cost the the production labor. 4. Control System The gold granulator is equipped with a control system to regulate the melting and granulation process. This system includes: - Temperature Control: Ensures the gold is melted at the optimal temperature. - Inert Gas Flow Control: Adjusts the Inert Gas Flow Rate to get the most shinning and fine granules. - Automation: Advanced granulators may feature automated controls for precise and repeatable operation. 5. Advantages of the Graphite Crucible with Stopper Rod - Precision: The stopper rod allows precise control over the flow of molten gold, ensuring uniform granule size. - Durability: Graphite components are highly resistant to thermal and chemical degradation. - Efficiency: The system enables continuous and efficient production of high-quality gold granules. Summary: The graphite crucible with a stopper rod is a critical component of a gold and Silver granulator, enabling precise control over the melting and granulation process. Its robust design and high-temperature resistance make it ideal for producing consistent, high-quality gold granules. By understanding the structure and functionality of this system, manufacturers can optimize their granulation processes and achieve superior results.Coining, Bar & Ingot MakingGrain Makingnew39FLEx-Factoryhttps://www.goldmachinery.com/listings/7693333-grain-making-machine-gold-silver-10kg-capacity380V – 3 phases - 60 Hz15 kW AdjustableGold, Silver15 to 18 minutes per cycle8KG Ag, 12Kg Au1600 Degrees C26" x 22" x 60" H32" x 63" x 48" H330 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3192c816acfc869f88d9022070203e3/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/30b29f576a85e1323fdb60e74ae5a046/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9acb85052e355eb30e1cc0d92c24bc7d/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fc493866894773fbd3dedaf44904568/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48c04c11b28dd747e94a1abd1914f2fc/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a0ef5b22f3ded040ddfe8f72b116f67/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d4a280db88d62e2c33c193ed16c4695/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/095126a10e257e26690e47dceed0ea3f/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.png2025-07-18 13:26:34 UTC7693338202539FL10This 20Kg Model is Equipped with a Graphite Plug System, Stainless Steel Water Tank, and an Automatic Lifting System The metal granulator is applied to produce various metal grains, such as gold, silver, K gold, copper, etc. The metal granulator includes three parts: the furnace, the water tank and the loading frame. The molten metal will flow through the pure graphite comes with multihole at the bottom, and the whole granulation process is protected by inert gas argon or nitrogen, which minimizes the oxidation of metal. The gold granulating machine & silver granulating machine are the most commonly used models. The metal granulator is equipped with an argon flow protection device. During the melting & granulation process, argon protection will be injected to prevent the oxidation of precious metals to the greatest extent. while if the customer plan to cast K gold grains, then we will recommend using vacuum granulating machine to prevent oxidation. click here to get more information about the vacuum metal granulator. We can customized different metal granulator for customers according to different metals, different capacities, and different production efficiency for each client, please inquire. Features: - The granulator is used to produce high-quality precious metal particles and alloy particles with uniform color. The finished beads have no oxidation, high density and no pores, especially good spherical surface, uniform particles and stable color. - The metal granulator comes with Inert gas protection system, which minimize the oxidation in the process of metal melting and casting, especially suitable for precious metals and alloy metals that are easily oxidized. It also reduce the loss of smelted metal and increase the life of the crucible. - Applied with the Intermediate frequency induction heating technology, rapid melting speed, it takes about 15 minutes to melt one batch, and the casting time is about 15 minutes, which means that you will get high-quality metal grains within half an hour. - The temperature can reach 1600°C, the granulation time is 20-30 minutes once, and the melting and granulation are completed in one. After the casting is completed, the pelletizing barrel is easy to take out. - Pure graphite crucible comes with quartz jacket as protect, the multihole design at the bottom can act as breaker to make the molten metal cast into grains, what is more, It only takes 5 minutes to replace new crucible which is very convenient for the operator - Special cooling water to prevent adhesion of metal particles and make particles more evenly formed. - Metal granulator melting chamber and water tank can be designed separately or as an integrated unit, if there is not enough space for the user, we will recommend the integrated unit, which takes up less space. - The detailed and complete self-diagnosis system and protection function ensure that the equipment failure rate is low. - After the melt is completed, the casting speed is fast, making the metal particles smooth and smooth without sand holes. - 2 Year Warranty A gold silver granulator is a specialized machine used to produce high-quality gold granules, which are essential for applications in jewelry making, electronics, and industrial processes. One of the key components of a gold silver granulator is the **graphite crucible with a stopper rod**, which plays a critical role in controlling the flow of molten gold and ensuring consistent granule production. Below is an overview of the structure and functionality of this system. 1. Graphite Crucible The graphite crucible is the core component of the gold granulator, designed to withstand high temperatures and chemical corrosion. It is made from high-purity graphite, which offers excellent thermal conductivity and durability. The crucible is responsible for holding and melting the gold or silver - Material: High-purity graphite ensures minimal contamination of the molten gold or silver. - Design: The crucible is typically cylindrical with a tapered bottom to facilitate the flow of molten gold. - Heating: The crucible is heated using an induction Heating furnace to melt the gold or silver at temperatures above 1,064°C (1,947°F). 2. Stopper Rod System The stopper rod is a precision mechanism that controls the flow of molten gold from the crucible into the granulation chamber. It consists of several key parts: - Rod Material: The stopper rod is also made from high-quality graphite or ceramic to withstand high temperatures and resist wear. If the material is easily contaminated by graphite, we will also use boron nitride material as the plug rod - Sealing Mechanism: The rod fits tightly into an opening at the bottom of the crucible, creating a seal to prevent molten gold from leaking. - Actuation System: The stopper rod is connected to a manual or automated control system (e.g., pneumatic or electric actuator) that allows precise adjustment of the rod’s position. This controls the flow rate of the molten gold. 3. Granulation Chamber Below the crucible and stopper rod is the granulation chamber, where the molten gold is transformed into granules. This chamber typically includes: - Cooling Medium: Water is mostly used to rapidly cool the molten gold droplets, solidifying them into granules. - Collection Tray: A tray or container collects the solidified granules for further processing. The granulator adopt the automatic lifting up tray to collect the granules, which can greatly reduce the cost the the production labor. 4. Control System The gold granulator is equipped with a control system to regulate the melting and granulation process. This system includes: - Temperature Control: Ensures the gold is melted at the optimal temperature. - Inert Gas Flow Control: Adjusts the Inert Gas Flow Rate to get the most shinning and fine granules. - Automation: Advanced granulators may feature automated controls for precise and repeatable operation. 5. Advantages of the Graphite Crucible with Stopper Rod - Precision: The stopper rod allows precise control over the flow of molten gold, ensuring uniform granule size. - Durability: Graphite components are highly resistant to thermal and chemical degradation. - Efficiency: The system enables continuous and efficient production of high-quality gold granules. Summary: The graphite crucible with a stopper rod is a critical component of a gold and Silver granulator, enabling precise control over the melting and granulation process. Its robust design and high-temperature resistance make it ideal for producing consistent, high-quality gold granules. By understanding the structure and functionality of this system, manufacturers can optimize their granulation processes and achieve superior results.Coining, Bar & Ingot MakingGrain Makingnew39FL1Ex-Factoryhttps://www.goldmachinery.com/listings/7693338-grain-making-machine-gold-silver-20kg-capacity-with-automatic-lifting-system380V – 3 phases - 60 Hz40 kW AdjustableGold, Silver, Copper15 to 18 minutes per cycle20KG Ag, 40Kg Au1600 Degrees C64" x 61" x 76" H900 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1254ba71aed6de2080eb5c8cd402f01d/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fdc4149cae0dbc4782c0018bf528a58/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f7088857a5dc0e83709c9a09e60b2f9/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fc493866894773fbd3dedaf44904568/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48c04c11b28dd747e94a1abd1914f2fc/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a0ef5b22f3ded040ddfe8f72b116f67/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d4a280db88d62e2c33c193ed16c4695/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/095126a10e257e26690e47dceed0ea3f/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.png2025-07-18 13:26:54 UTC76943042025W5P0What is Air cooled water chiller? Air-cooled water chiller is one of the models of water chiller, the normal temperature water will be cooled to a certain temperature through the compressor of the chiller to strengthen the cooling mold or machine, as a stand-alone use, the radiator is a built-in fan, there are three interconnected systems: refrigerant circulation system, water circulation system, electric automatic control system. The air-cooled water chiller model is compact, small and movable. Our water chillers are mainly used in the cooling of intermediate frequency furnace and continuous casting, mainly applied in the process of lowering the temperature of the power supply furnace, to protect the whole equipment from the damage of high temperature. Sometimes, it is also used in the cooling of semi-products cooling. Features: - The compressor unit adopts vortex type hermetically sealed compressor and electric control components, and is equipped with condenser and evaporator made of high quality copper tube for heat transfer and high efficiency. - Our water chiller Equipped with all kinds of safety protection devices, stable performance, low noise, long service life, simple operation; the use of liquid crystal display man-machine interface, simple and convenient operation, operating conditions at a glance. - The water chiller are equipped with single compressor or multi-compressor combined refrigeration system. The compressor can automatically alternate the operation according to the load change and balance the running hours of each compressor to save energy and extend the service life of the chiller set. It is convenient for energy adjustment and more energy-saving at partial load. - The whole water chiller designed with shell box structure & attractive appearance &compact structure, the chiller can be checked at any time; the chiller comes with its own water tank and circulating water pump according to the cooling capacity, without the need for installation of cooling tower and cooling water pump, installation and maintenance is simple and convenient.Miscellaneous Machineryneww5PEx-Factoryhttps://www.goldmachinery.com/listings/7694304-new-air-cooled-water-chiller350 Lbs20M0.37kw50L100L/minDN25/1 inch0.38KW3.75KW4.5KW12790Kcal/h5-30℃49" x 26" x 50" Hhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c423717fa7c79ad36a6f0c6982449c8/original-new-air-cooled-water-chiller.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe7948d2ca74021bcb051793b8a000cc/original-new-air-cooled-water-chiller.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9936f9dee91c0a00926b00b99642449e/original-new-air-cooled-water-chiller.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ccdf465dab93c71f65517fae376c4c78/original-new-air-cooled-water-chiller.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0201f270b60f46608c1c916568ec95d0/original-new-air-cooled-water-chiller.jpg2025-07-18 18:22:29 UTC76968202025FastiMPLHIGH SPEED MINI BALL CHAIN MACHINE The MPL automatic machine is suitable for the high-speed production of BALL CHAINS of medium and small size. The machine works with a spool of wire and a spool of plate sheared to a precise width. The machine is completely mechanically operated, it ensures long-lasting efficiency and precision and reduced maintenance costs. By means of two coining stations, the wire and the plate are pressed together to form a single chain of wire and ball elements joined together. The kinematic chain of the machine is designed to optimize operations at high speeds with the utmost noise reduction and precision. Thanks to its dual-fed system, its wide range of diameters and the various types of shapes that can be obtained, the MPL machine is the benchmark for the production of BALL CHAINS worldwide.Chain Making/ManufacturingChain Making Machinesnew779476Ex-Factoryhttps://www.goldmachinery.com/listings/7696820-fasti-model-mpl-high-speed-mini-ball-chain-making-machine230V / 3 Phase / 60Hz400W200-400Min: 0.75, Max: 1.80mm74 x 144x 81cm240 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bddd5957779fff77c8747758fdf3dee5/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7844953d46a8e25d1213721430abd64/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b4bf1ba7fac9320e4d7719548e6064e4/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c09436654889542f2f5ea90b7a1fb52d/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7197086c5842e1a9cba9cb3f5367a4fc/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26cdc21983a50c9be3857ed3c42baa18/original-fasti-model-mpl-high-speed-mini-ball-chain-making-machine.jpg2025-07-21 13:03:26 UTC77044402025JC15Jewelry Continuous Casting Machine Adopts intermediate frequency induction heating technology, with the advantage of high power and fast melting, and the highest temperature can reach 1300°C. It has strong intermediate frequency stirring force, which can lead to a high degree of uniformity of the metal, which is especially helpful for the casting of gold, silver and copper alloys. Equipped with independent temperature control to continuously monitor the temperature during the entire draw process. Comes with the built-in continuous temperature measurement system, easy to monitor the state of metal lead casting, which leads to the best density and quality of the final product. Design With the ability to work 24 hours per day, this function ensures maximum productivity to meet the high production demands of some customers. Power traction casting can realize drawing pipes, drawing rods, drawing sheets, and drawing strip pipes, which has the characteristics of high speed and high density of finished products. It has the unique magnetic stirring induction heating function to make the metal smelt more uniform and increase the casting speed. Special device is designed in the Pulling for automatic detection of slippage phenomena between the roller and the semi-finished product. If a rapid cooling process is required, a water spray system can be installed to cool the semi-finished product directly. Each continuous casting machine is equipped with advanced hydraulic shears for easy cutting of semi-finished products. Abnormal alarm system, it will automatically stop when an abnormality occurs, so as to protect the machine to the greatest extent and prevent damage to the machine. Different capacities can be customized, down-draw casting, effectively reduce the sand hole of the workpiece, and meet the requirements of deep processing.Wire, Plate & TubeMelting & Continuous CastingnewJC15Ex-Factoryhttps://www.goldmachinery.com/listings/7704440-continuous-casting-machine-20kw-3kg-capacity-for-gold-silver-copper380v-420v, 50/60Hz20Kw25AGold, Silver, Copper, Brass, Bronze, and their alloys5-10 Mins200mm/min3KgArgon Gas or Nitrogen 1600 Degrees C50" x 26" x 73"550 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dae35a4fc137b4059fa1ebef441cb1a/original-continuous-casting-machine-20-kw-3-kg-capacity-for-gold-silver-copper.jpg2025-09-15 13:37:27 UTC770444320258mmWire, Plate & TubeWire & Tube Makingnew779478Ex-Factoryhttps://www.goldmachinery.com/listings/7704443-two-way-wire-drawing-machine-8mm5.5Kw380v, 3-Phase≤ 8 mmHRC 60-6245# Steel with Hard Chrome Plating32m/min75" x 32" x 55"1984 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2f3dd78048311a0ca349baec5ebc2df1/original-two-way-wire-drawing-machine-8mm.jpg2025-07-25 15:37:57 UTC7710865Greenerd#3Cast iron stand includedPressesFoot & Arbor Pressesused779479Pawtucket, RIhttps://www.goldmachinery.com/listings/7710865-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand1-1/2 tons with 12" pilot wheel11-1/2"23:16"6-1/2" diameter3/4" - 1" - 1-1/4" - 1-5/8"25" x 20" x 60" high285 lbs. with standhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f41bd938f6481a7ce6a7d2a8ecb42390/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d2c8ab8be863bb829411ef9fd735d3d/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/968056034040b970cdc39397c253c07f/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0d080742b33cfc91708134188da5b75/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f5316edabbe8a069ecec416ef85bbf5/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e308d3673b17c36ab21637d271c67cb7/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2a4fa9474785aa4c74fe8fa8386000a2/original-used-greenerd-3-hand-operated-arbor-press-on-h-d-cast-iron-stand.jpg2025-07-29 13:21:33 UTC7710906E.A. Adams#2Floor model Hand operated C-frame style Equipped With: - Cast iron stand - Hand lever - Counterweight - Die Dish - Catch panPressesFoot & Arbor Pressesused779480Pawtucket, RIhttps://www.goldmachinery.com/listings/7710906-used-e-a-adams-type-screw-fly-press-model-2-original-paint5-1/4"3"7-3/4" x 11-1/2"2-1/2"21" x 32" x 59" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/823822e45d643fffce23fc38837d67e8/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d2ea8c2a838bccd13165cf766498b5a0/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b0826dfd3faf913d8e5ffce13a37783c/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d853623adfbb98ad753a6c254a7a874/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4bd76eda309ac3c882ffb135255aeb93/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48d2fd6f27ac0b8e2b8c3f3a5beee1d2/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4151b115a1e52f33418f35ffebea6beb/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a7c44958eb7d6b341993631a9184535b/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7878f7d350b9805082d1a31353450780/original-used-e-a-adams-type-screw-fly-press-model-2-original-paint.jpg2025-07-29 13:26:38 UTC77129562025Baltestri Technologies SRLBT-AR-AU-002-AIt can be used for refining both metal granules and powders. Refining plant for gold alloys up to 2kg capacity of input material per batch. It represents a versatile model of refining unit: - refining alloy by aqua regia with Au min. 65% and Ag max 15% content; - refining low karat alloy by inquartation. - Processing capacity (input material as powders): depending of the volume/specific weight The Gold Refining Unit is made of the following components: - Polypropylene cabinet with integrated suction system for vapors - Loading tank for acids with tap - Reactor 1 for alloy leaching with heating system for quick and efficient digesting reaction - Reactor 2 for AgCl filtration and Au precipitation - Reactor 3 for Au filtration/effluent discharge - N. 02 Filter Units: one for silver as AgCl and one for pure Gold (AU ≥ 999.5) - N. 01 Automate dosage system for precipitation process - Devices included: - heating system: Oil bath heater for Reactor 1 - vacuum pump for liquids transferring - valves panel for flow regulation - pneumatic control board - mechanical stirrer pneumatically activated - electrical control board - AODD discharge pump for effluents CONTACT US TODAY FOR A QUOTERefining EquipmentGold Refiningnew779481Italyhttps://www.goldmachinery.com/listings/7712956-gold-refining-plant-2-kg-batch-by-aqua-regia-process220V, 50/60HzMin.: 0.2Kg, Max.: 2KgAu Min.: 65%, Ag Max.: 10%Min 999,5/10001kW60" x 74" x 32"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/08dd37962230ada5427821fb9f9525f7/original-2025-baltestri-technologies-srl-bt-ar-au-002-a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b91b2a9d2b68919779d0394f225d743d/original-2025-baltestri-technologies-srl-bt-ar-au-002-a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca3f5fe5c19f65308c6deb338fca91f1/original-2025-baltestri-technologies-srl-bt-ar-au-002-a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fbad97c1a05e2ab0ccc3bae09ab0545/original-2025-baltestri-technologies-srl-bt-ar-au-002-a.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1cac3a445c54ca890fa45ce82b0fe411/original-2025-baltestri-technologies-srl-bt-ar-au-002-a.jpg2025-07-30 13:04:32 UTC7815327GortonP1-20Equipped with Cast iron baseToolroom & General MachineryPantographs/Engravers/Cutter Grind/Duplicating/Copying/Reducingused779482Pawtucket, RIhttps://www.goldmachinery.com/listings/7815327-used-gorton-2-dimensional-pantograph-engraver-model-p1-2115V/1PH/60HZ8" x 18"8-7/8" x 24"10"8.75".31"11.125"5"7.25"8"21"11.625"0"4700 to 18,000 RPM1/4 HP35" x 42" x 48" high640 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b62f9cab39d04353ff911ddff0cd1cf/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9c186cea05d442b038c39aa70682c0db/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/20fe4844f726cdf598a122c7dd02a895/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/777cdccf68b481bf3a982bd01dd4f0e9/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/641e324b7c502c1e8569e41e35139e6a/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6132fdcb59ee0d8616091be519881043/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/75834f019222ff056b989514bdd2a1dd/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c55a473f8c9d0c620ac85cb8e69c53a1/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/faf64c906f34e82d301a843037d5c20d/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8994eaab9f27acc5609e195181fd05d6/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/313b890e58b4d9f294033a405e8d7b6e/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a135ab5f1c53f656672559efd15a7737/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b79ddc70388c42182d7affc0eb2b74f2/original-used-gorton-2-dimensional-pantograph-engraver-model-p1-2.jpg2025-08-29 16:14:19 UTC78220412025Baltestri Technologies SRLBT-AR-015-RPP-AThis refining plant is for gold alloys up to 15Kg capacity of input material per batch. It represents a versatile model of refining unit: - Aqua Regia Process: For Platinum refining by Aqua regia and/or Gold refining PLEASE CONTACT US FOR A FULL QUOTERefining EquipmentGold Refiningnew779457Italyhttps://www.goldmachinery.com/listings/7822041-platinum-refining-unit-15kg-batch-rotative-aqua-regia-processAccording to country of installationMin.: 4Kg, Max.: 15Kg13kWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c7307c07cd0d78355543f4cdc6386c1/original-platinum-refining-unit-15-kg-batch-rotative-aqua-regia-process.jpg2025-09-03 13:40:02 UTC7822347Mendell KilnsBK-40Offered As is - Less Pilot / controlGeneral Jewelry MachineryBurn-Out Ovens / Furnacesused278RE2166Pawtucket, RIhttps://www.goldmachinery.com/listings/7822347-used-mendell-kilns-gas-burnout-oven-furnace-model-bk-426" x 25" x 17" h 22" x 17"30" x 30" x 41" H1,000 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f11534406ec021dd49a53b364b524c48/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26708b46827d1e19b248b48df2b90436/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/354fb6a611ecd057e1cebc5e1328b11e/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b012c93934eab3d1081388154b95716/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d0a1d3df6b2074f81ae0cb7dd23e9e4/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0551e31ac81cbe70ca872ac629654c16/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ae19f538ffd498d62d68026c29318fd/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9977a7eb268a33465018d2557b1c7ac9/original-used-burnout-furnace-oven-kiln-20-x-20-x-20.jpg2025-09-03 14:10:20 UTC7840156202690KG0Additional Details: Panel Board: Will be equipped with all necessary switches and controls for efficient operation. The panel will be wired and instruments will be tested before leaving our plant. Cooling System: Cooling system specially designed pressure less cooling chamber including prevision flow meter control to monitor accurately the cooling and water temperature gauges with micro-processor control to activate the alarm system. Water pressure control is also interfaced with the alarm system. Withdrawal System: The withdrawal mechanism is designed with mechanical and hydraulic interface. The motor drive is controlled electronically with processor pulse. Crucible: Manufacture from high purity. Graphite is machined to precision tolerance. Dies: Casting Dies are precision manufactured from high density graphite.General Jewelry MachineryMelting & Continuous Castingnew779483Pawtucket, RIhttps://www.goldmachinery.com/listings/7840156-continuous-casting-machine-90kg-capacity-for-gold-silver-copper90KgRectangular : 6" (152 mm) wide x .1/2"(12 mm) Thick1" to 8" IPM ( 25 mm / 200 mm p/m)208 / 220 / 240, 50-60 CY441581260º C (2300º F)Heavy duty HR steel construction with removable top.The heating element is constructed of silicone carbide. The element is designed to provide trouble free life. The element has a unique design the easiest and shortest way to replace. (normal replacement time is 15 min. with Furnace HOT)The furnace chamber contains multiple courses of high quality refractory and thermal efficiency.Internally the Furnace operates under atmosphere inert gas. This will minimize oxidation of graphite crucible and die.Multi Zone heating system for better heat curve accuracy.Microprocessor temperature control with time proportion and cycle rate calibrated for Type K thermocouple 0 to 2,300o F for close line control. (includes HI-Limit safety)2138 mm x 1219 mm x 1219 mm4200 lbs. (1905 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8468170582e3dda1399b3fcc2d8fb019/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bbb72c0256a5e06c027fa70177a3f1b/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1460e754653b1a2d3e5734cdb1b93945/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/705154c76bca9beb129b047f96e7a800/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.JPG2026-02-12 19:42:38 UTC784017310-10-2HI0Additional Details: Rolls: The mill will be furnished with steel alloy rolls ground to a plain finish. The ends of the roll faces will have a 45o bevel and be taper ground about .010" from the end of the roll to the 10" wide flat ground area. Roll Bearings: The rolls will operate in heavy duty roller bearings and will be equipped with anti-friction thrust bearings to prevent lateral movement. Pinion stand is equipped with anti[friction bearings throughout. Rolling Mill Head: The rolling housings are amply proportioned steel designed for good rigidity in finishing rolling. The assembly includes precision steel hardened roll with back-up diameter 8" x 10" wide and work rolls driven 5.300 diameter x 10" wide. High precision anti-friction roller bearings are proportioned to take load in excess of normal requirements and provide zero end float. Roll Adjustment: The mill will be furnished with double outboard gear. The double cut board gear arrangement will be used for fine roll adjustment. An interlocking device electronically is used for simultaneous or individual adjustment of the adjusting screws. The upper roll bearing boxes are held in position through raising rods which are attached to the adjusting screws. The adjusting screws are made of alloy steel with the hardened ends and rest against hardened steel plates Pinion Gear: Specially designed with alloy steel hardened herringbone gear to provide very smooth finish. Power Screw Down Double Motors: For rapid roll change between passes, we will furnish a motorized screw down arrangement will be suitable for making roll adjustment with stock in the mill. Mill Drive: The mill is driven by a 40 HP, AC Variable speed motor. The mill motor will be coupled to a combination herringbone reducer and pinion stand. The reducer and pinion stand are equipped with anti-friction bearings. Drive from the reducer and pinion stand to the rolls is through universal joint couplings. Entry and Exit Table: We plan on furnishing entry and exit tables keyed to the housings for alignment and readily adjustable vertically by adjusting screws and plain side guides. Double Recoiler Assembly: Rate for 500 lbs. capacity is mounted to base extension of the machine maintains perfect alignment between recoiler and rolls. Recoiler shaft is keyed and complete with air operator clutch and Over harm hold down Stand installation comprising of a welded steel base of heavy plate construction enclosing the motor gear reducer, pinion gear box, rolling head and recoiler for easy operation.Wire, Plate & TubeRolling Mills, Powernew779484Pawtucket, RIhttps://www.goldmachinery.com/listings/7840173-finish-rolling-mill-10-x-10-reversing-mill-with-precision-power-screw-downs86" W x 132" L x 120" H (2182 mm x 3353 mm x 3048 mm)380 / 440 V, 3 PH, 50 / 60 Cy.High Precision-Double Motor power screw down w/ .0001 increment40 HPDriven0 / 120 F.P.M. (0 / 38mpm)10" (254 mm)10" (254 mm)10" (254 mm)10" (254 mm).200" .010" thick (5mm to 0,05mm)14,000 lbs.( 6,363 Kg )https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/475cd13340ca014bbeb7f662040dbbf3/original-finish-rolling-mill-10-x-10-reversing-mill-with-precision-power-screw-downs.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a4c857ce063a586cab05ee184ed6e43/original-finish-rolling-mill-10-x-10-reversing-mill-with-precision-power-screw-downs.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/aad11fe91d4b116dc215f797569fa93d/original-finish-rolling-mill-10-x-10-reversing-mill-with-precision-power-screw-downs.jpg2025-12-09 13:59:12 UTC7840414Cooper Weymouth0Note: There is a brake in the motor cover, the chopper is offered as seen / photographed - The machine is fully functional Offered in good working order.Toolroom & General MachineryMetal Workingused779486Pawtucket, RIhttps://www.goldmachinery.com/listings/7840414-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty110V/1PH/60HZ6".062"(1/16")1/3 HP190 strokes per minute23" x 17" x 44" high190 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acefa9328c49d332b5cb4a134189f177/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1138cb0f35b5b65b70ffaa8ec4a94f9c/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d582d2474eaec21e4705b666262f1ad/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8647289488d521f81be525f5749bf225/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab456c1340cad06d1bf30b5b6861aa73/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1ec4aadc946d14c746bf2ac86a24e84/original-used-cooper-weymouth-6-scrap-chopper-recycle-shred-metal-brass-steel-heavy-duty.jpg2025-09-16 19:35:46 UTC78509642025200SWith automatic pneumatic protective baffle With die ejection device With PLC touch screen With fully automated feeding transfer systemCoining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779487Ex-Factoryhttps://www.goldmachinery.com/listings/7850964-200-ton-automated-hydraulic-coining-press200 TonsTo order specs22Kw200 Ton25MPa2000mm400mm900mm220mm/s165mm/s8mm/s550mm x 750mm1510mm x 1765mm x 2620mm2400Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ebf7264c929d47d61874e60cbffbb6e/original-used-200-ton-automated-hydraulic-coining-press.png2025-09-15 13:46:06 UTC78509722025JC25Jewelry Continuous Casting Machine Adopts intermediate frequency induction heating technology, with the advantage of high power and fast melting, and the highest temperature can reach 1300°C. It has strong intermediate frequency stirring force, which can lead to a high degree of uniformity of the metal, which is especially helpful for the casting of gold, silver and copper alloys. Equipped with independent temperature control to continuously monitor the temperature during the entire draw process. Comes with the built-in continuous temperature measurement system, easy to monitor the state of metal lead casting, which leads to the best density and quality of the final product. Design With the ability to work 24 hours per day, this function ensures maximum productivity to meet the high production demands of some customers. Power traction casting can realize drawing pipes, drawing rods, drawing sheets, and drawing strip pipes, which has the characteristics of high speed and high density of finished products. It has the unique magnetic stirring induction heating function to make the metal smelt more uniform and increase the casting speed. Special device is designed in the Pulling for automatic detection of slippage phenomena between the roller and the semi-finished product. If a rapid cooling process is required, a water spray system can be installed to cool the semi-finished product directly. Each continuous casting machine is equipped with advanced hydraulic shears for easy cutting of semi-finished products. Abnormal alarm system, it will automatically stop when an abnormality occurs, so as to protect the machine to the greatest extent and prevent damage to the machine. Different capacities can be customized, down-draw casting, effectively reduce the sand hole of the workpiece, and meet the requirements of deep processing.Wire, Plate & TubeMelting & Continuous CastingnewJC25Ex-Factoryhttps://www.goldmachinery.com/listings/7850972-continuous-casting-machine-30kg-capacity-silver-gold380v-420v, 50/60Hz45KwGold, Silver, Copper, Brass, Bronze, and their alloys10-12 Mins10-20cm per minute30Kg SilverArgon Gas or Nitrogen 1600 Degrees Chttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dae35a4fc137b4059fa1ebef441cb1a/original-continuous-casting-machine-20-kw-3-kg-capacity-for-gold-silver-copper.jpg2025-09-15 13:39:36 UTC78510766700.0Gold Machinery Group ----------------------------------------------------------------------------------------- We are pleased to offer you... Muller Model R2-HA Rotary Swaging Machine .65″ Capacity Our Inventory Number: 0623-140 Technical Specifications: 220/380 Volts / 3 Phase / 56/60 Hz Number Of Dies: 2 Bar (wire) Capacity: 1.0 - 6.0mm (.04-0.25") Tube Capacity: 1.0-16mm (.04" - 0.65") Overall Size: 34" x 70" x 58" Estimated Weight: 3880 Lbs Equipped with: Assorted Turret Tooling For The Eyeglass Frame Industry Assorted Die/Hammer Spacers Hydraulically Operated Feed Unit Turret Magazine for Bars & Tubes Muller Catalog about Rotary Swaging, consisting of: applications,advantages of rotary swaging, methods, etc.*** Special Note: Operating and parts manual available from the following factory contact: Heinrich Müller Maschinenfabrik GmbH Sitz/Location: D-75179 Pforzheim, Göppinger Straße 1-3, Germany Current similar machine replaces today at $37,400.00CNC, Metalworking & ManufacturingMetalworking EquipmentusedPawtucket, RIhttps://www.goldmachinery.com/listings/7851076-used-muller-model-r2-ha-rotary-swaging-swager-machine-65-capacityhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e7c0bf7b7ed732b9df1f1f633da26bf0/original-406994325.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d8322fb9ed96bb180b399e2fdc82684e/original-406994325_2.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/158dfd3035ecf2cc7844969733a465ec/original-406994325_3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/da1619fa0a675cece1e2907d827a8ef6/original-406994325_4.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/260dadc928ac95b592bd214b42b989a0/original-406994325_5.jpg2025-09-15 14:35:19 UTC78534442025Refining EquipmentSilver RefiningnewBT-EL-AG-030Italyhttps://www.goldmachinery.com/listings/7853444-silver-electrolytic-refining-plant-30kg-capacityUp to 30KgMin 12Kg Approx. (1 anode), Max 144Kg Approx. (12 anodes)Ag ≥ 80%, Au ≤ 2%999/10002Kwhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1bf0622629451c2aa3668a630b6b3fe/original-used.png2025-09-16 14:25:47 UTC7853655Mirro-Brite0EQUIPPED WITH: - 1/2" thick polyurethane lining - Drain - Unloading door with built in chutePolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779488Pawtucket, RIhttps://www.goldmachinery.com/listings/7853655-used-mirro-brite-vibratory-finishing-machine-model-mb-100aa110V/1PH/60HZ.67 cubic foot (2/3)16"28-1/2"Variable speed drive1/4 HP5"5-1/2"90 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d051eefc6aae3ef18b83d314d861672e/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69249d63d1beeeb7fe48976f99891a0d/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc7647eedcd56241f3f013a31e79bb53/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e934135105669dbb0fc1d130c4587b5a/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a4028c318da79e8d7be67ca044366d42/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpg2025-09-16 17:04:24 UTC7853734Mirro-Brite0EQUIPPED WITH: - 1/2" thick polyurethane lining - Drain - Unloading door with built in chutePolishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779489Pawtucket, RIhttps://www.goldmachinery.com/listings/7853734-used-mirro-brite-vibratory-finishing-machine-model-mb-100aa110V/1PH/60HZ.67 cubic foot (2/3)16"28-1/2"Variable speed drive1/4 HP5"5-1/2"90 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c48c07601afa603bb301d6dfb91d94b/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b92f80d3bb93f017c553a1b038146313/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/74ac28411134e782b2808e4967f0c521/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f01639b59d0009af9fc02036da051fa1/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e4265e3639f25662777e4fcd21382142/original-used-mirro-brite-vibratory-finishing-machine-model-mb-100-aa.jpg2025-09-16 17:07:27 UTC78539160Machinist Metal Work holding 3/4" T-Slot - Table Size 36"/24" /5" H Plate size is 36" x 24" x 5" H Estimated weight 175 LBS Equipped with: - (5) 3/4" T-SlotsToolroom & General MachineryMiscellaneous Machineryused779490Pawtucket, RIhttps://www.goldmachinery.com/listings/7853916-used-machinist-metal-work-holding-3-4-t-slot-table-size-36-x-24-x-5https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d83912871b8ad1c47056c9807fd927d5/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d27c10eb68bf4752981e52fc3fb79b39/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b290a1091dd802f31a2a1195f139b10/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa49aeb3f9aafc42e81a1e2a76e8720d/original-used.jpg2025-09-16 18:20:17 UTC78540200Precision 30" X 30" 3" H Cast Iron - Lapping work Table Plate size size 30" X 30" 3" H Estimated weight 155 LBS Equipped with - Protective wood coveToolroom & General MachineryMiscellaneous Machineryused779491Pawtucket, RIhttps://www.goldmachinery.com/listings/7854020-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-tablehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cea139b20dfa9d2053ee966a137d9373/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ee990b8695866e49b274d558e03e45ba/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd8541fb2b0e2986d1b10580b4170b7e/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a6470ef68b5935fbcdc6a34a9a31736d/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e79e8e8b531fc881bc8df5ae71256b1/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/663e7c4a4a12b1266819f6fe35ac1657/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1dd81baa76d4b037f401bb89dc10b7a5/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/06bcfdb6eec4d94e82f7cc1570709693/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae2fc079c7102ecc8e375758a9fe9de0/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f94631c29025c8ada00065177fb1eb2c/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3a4a9842f2a5f726fa3b7aaf0503951f/original-used-precision-30-x-30-x-3-h-cast-iron-lapping-work-table.jpg2025-09-16 18:22:26 UTC78540220Center height 36" Estimated weight 1250 LBS Equipped with: Wood fitted table top Original flake marks on the table About: Sturdy design, trimmed of excess weight for handling ease. Made from quality close-grained castings specially heat-treated for stress relief, stability and wear resistance. Precision ground finish is tenth accuracy.Toolroom & General MachineryMiscellaneous Machineryused779492Pawtucket, RIhttps://www.goldmachinery.com/listings/7854022-used-machine-products-corp-job-5-48-x-30-precision-cast-iron-surface-plate-on-hd-steel-standhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9efa817bc16e362106aa109db969bbf7/original-used-machine-products-corp-job-5-48-x-30-precision-cast-iron-surface-plate-on-hd-steel-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/850d36bc9320c2bd18e0be49491a91a6/original-used-machine-products-corp-job-5-48-x-30-precision-cast-iron-surface-plate-on-hd-steel-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/78d11e17225ea4d65e0532d17bc9bc23/original-used-machine-products-corp-job-5-48-x-30-precision-cast-iron-surface-plate-on-hd-steel-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3976950d8ea774edc107e6189630bd74/original-used-machine-products-corp-job-5-48-x-30-precision-cast-iron-surface-plate-on-hd-steel-stand.jpg2025-09-16 18:27:07 UTC78922432025JC70Jewelry Continuous Casting Machine Adopts intermediate frequency induction heating technology, with the advantage of high power and fast melting, and the highest temperature can reach 1300°C. It has strong intermediate frequency stirring force, which can lead to a high degree of uniformity of the metal, which is especially helpful for the casting of gold, silver and copper alloys. Equipped with independent temperature control to continuously monitor the temperature during the entire draw process. Comes with the built-in continuous temperature measurement system, easy to monitor the state of metal lead casting, which leads to the best density and quality of the final product. Design With the ability to work 24 hours per day, this function ensures maximum productivity to meet the high production demands of some customers. Power traction casting can realize drawing pipes, drawing rods, drawing sheets, and drawing strip pipes, which has the characteristics of high speed and high density of finished products. It has the unique magnetic stirring induction heating function to make the metal smelt more uniform and increase the casting speed. Special device is designed in the Pulling for automatic detection of slippage phenomena between the roller and the semi-finished product. If a rapid cooling process is required, a water spray system can be installed to cool the semi-finished product directly. Each continuous casting machine is equipped with advanced hydraulic shears for easy cutting of semi-finished products. Abnormal alarm system, it will automatically stop when an abnormality occurs, so as to protect the machine to the greatest extent and prevent damage to the machine. Different capacities can be customized, down-draw casting, effectively reduce the sand hole of the workpiece, and meet the requirements of deep processing.Wire, Plate & TubeMelting & Continuous CastingnewJC70Ex-Factoryhttps://www.goldmachinery.com/listings/7892243-continuous-casting-machine-50kg-capacity-silver-gold380v-420v, 50/60Hz70KwGold, Silver, Copper, Brass, Bronze, and their alloys10-12 Mins10-20cm per minute50Kg Silver150mm13mm1600 Degrees Chttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a5b4a7d8e50583fa21a148e134987bdd/original-continuous-casting-machine-50-kg-capacity-silver-and-gold.jpg2025-09-17 11:25:39 UTC7958039GraebenerGMP 360 TK0The GMP presses are designed for manual operation as well as for automatic operation. For automatic feeding of high-quality coin blanks various feeding systems are available to feed the blanks from trays or cassette magazines into the embossing station. The embossed coins are placed onto coin trays. For larger quantities and medium quality, for example bullion coins, the GMP presses can also be equipped with a vibratory conveyor and dial feed. The embossed coins are either placed into a box or onto a conveyor belt transporting the coins to packaging.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentused779493Ex-Factoryhttps://www.goldmachinery.com/listings/7958039-used-graebener-model-gmp-360-tk-automated-coining-press36050 mm105 mm80 per minute50 kN9,000 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/689dab3e203ce3456145b20ce85586f6/original-used.jpg2025-10-01 14:23:42 UTC7958061HMEK3600Upgrades - Hitachi SJ700 AC drive for speed control - Omnilink controls - Motorized Tonnage adjustment (Height) The HME K360 is a type of knuckle joint press manufactured by HME (HME Minting, part of Group Rhodes) or Version HME, designed for high-precision coining, embossing, and sizing operations, such as for medals, proof coins, and other industrial applications. These presses are known for their 360-ton capacity and are part of HME's K-Series of coining machines.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentused779495Ex-Factoryhttps://www.goldmachinery.com/listings/7958061-used-hme-k360-manual-coining-press360 Tons2.125"90-200 SPM22 kW34 mm3.5 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/409c46925d002ea029675f904d9b74ca/original-used-hme-k360-manual-coining-press.png2025-10-01 14:23:24 UTC7977745J. Mc. Williams#30Floor Model, Hand Operated C-Frame Style - Wood stand - Hand lever - CounterweightPressesFoot & Arbor Pressesused779498Pawtucket, RIhttps://www.goldmachinery.com/listings/7977745-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-18696"4"9" x 14"1"2"26" x 37" x 69" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/39392fa71fe721a53374146e026a2b55/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca7a2fb751e6a2fe82a90cc5afb9a677/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92be18c9a8dad5e849a1ee9f5a7740df/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7d20b3bc848edc3951e9223c7d0399ca/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/40954ebf43395a45433e30c14401d464/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/711adc4826a58b253668aadc197b820a/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d7aa09589578662b8ec51ba9329663cd/original-used-j-mc-williams-3-antique-screw-press-fly-press-year-of-mfg-1869.jpg2025-10-10 16:38:46 UTC7977762749.0Equipped with Catch Tank: 17" x 17" x 18"Miscellaneous MachineryMiscellaneous Machineryused779500Pawtucket, RIhttps://www.goldmachinery.com/listings/7977762-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank34" x 24" x 14" Depth12" x 24" x 14" DepthEach Side49" x 66" x 38" Depth165 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ceb2449d324dd32a001a8079311c7596/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0b08649bff974708e6739277e41cf80b/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/567840e9206e903f68d1d26aa3a5fed3/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/173e26e68aaa14f2caa0963ffc4ac52c/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1011210f05a4151e5f73ab74610ce5d7/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd4dd3c631a519f0020fc4eb08166e3b/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d6f73abbe741f5ed26979d2c30e27c4/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/92f9f4c5047fa0fd0d8e84eff659c147/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42b07cf59e7713b0041eaf3c4b7125af/original-used-polypropylene-custom-chemical-tank-treatment-station-on-legs-with-drain-and-catch-tank.jpeg2025-10-10 16:54:27 UTC7977881H. Blundell & Co0Equipped With: - Cast iron stand - Counterweight - Die dish - Tool Holder - Die Holder - Hold Down ClampsPressesFoot & Arbor Pressesused779502Pawtucket, RIhttps://www.goldmachinery.com/listings/7977881-used-h-blundell-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providence-ri-18695-1/4"3"7-3/4" x 11-1/2"2-1/2"21" x 32" x 59" high675 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/87d91a1620176fa58da17f2a779729d9/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9591d0c7ad63d3d415e6901c8e61e3bb/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c4f51d77c7a332c49d7b2bd0d2c75340/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/114d99f7ac613270b59c3d17f14548d3/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a63c5e3ff2860310c8159719d98ad26b/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e87bac1567aea2968fccff304f19e111/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0ee456495d3894da08aa64f808c0a133/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fa1fbbbbd929bcd1e752e28b74e36b0e/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3e48557d21806e2e49d972cc97c03756/original-used-j-mc-williams-3.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca9bece025f57628340b755c28169fec/original-used-j-mc-williams-3.jpg2025-10-10 18:58:29 UTC7977887H. Blundell & Co0Equipped With: - Cast iron stand - Counterweight - Die dish - Tool Holder - Die Holder - Hold Down ClampsPressesFoot & Arbor Pressesused779503Pawtucket, RIhttps://www.goldmachinery.com/listings/7977887-used-h-blundell-co-type-hand-operated-stamping-forming-screw-press-fly-press5-1/4"3"7-3/4" x 11-1/2"2-1/2"21" x 32" x 59" high675 Lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/152760dab65684e82740add8358d9dc3/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68eac993f72e3ffb089c1e977ad81dad/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b933e9dadbb503cb32726b739c0d379d/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2efb0f9238396aaad3fd877c2cc20297/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e0892ac238ec7d977fec994c5cb1f5fe/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3c99f5291533aff62fda864a5ee07c2/original-used-h-blundell-and-co-antique-hand-operated-stamping-forming-screw-press-fly-press-providen.jpg2025-10-10 19:01:56 UTC7977910Standard Machinery#1A0EQUIPPED WITH: - Adjustable stroke - Cast Iron Base - Foot operated Pedal - Estimated weight 450 Lbs. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please enquire with your specific needs Including 5/8”Shank holder Priced @ $100 each ½” shank Shank holder Priced @ $100 each 3/8” shank Shank holder Priced @ $100 each Die dish Priced @ $150 each We will palatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused779505Pawtucket, RIhttps://www.goldmachinery.com/listings/7977910-used-standard-machinery-1a-metalworking-forming-stamping-2-5-ton-punch-press3"6"2"13/16" diameter22" x 16"1/2"2-1/2 tons22" x 24" x 60" high360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/452fe4fce67a1f58abf51558a295c33b/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c6beb589326d110d0123187af45750e/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c19bca4099cc6d1b99ee1ec77203c034/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bf20c8ed3a66850fa4ebb7584698e8ca/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/65b678e449ec9ce1332e83b970596f58/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9bc3b6412075e21f084b45a2d2dbe0db/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f7766eb55797d23c1ffbc14f7ceaf2f8/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbc39ade5de659f5e848ad24371a68be/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fefff6caa2766a21ed22b809c6686554/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0fb54c7e7d314680fd9bf0e0e3a4b542/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bfd01a590afeeee0cfc538b661c3766e/original-used-standard-machinery-1-a-metalworking-forming-and-stamping-2-5-ton-punch-press.jpg2025-10-10 19:29:44 UTC7977926Diacro1A0EQUIPPED WITH: - Factory stand - With tooling as seen and photographedCNC, Metalworking & ManufacturingMetalworking EquipmentusedDA5947779506Pawtucket, RIhttps://www.goldmachinery.com/listings/7977926-used-diacro-hand-operated-floor-model-bender-model-1a-with-tooling135 lbs. with stand.125" x .50.1875" x 1".5".25".3125"16".5".75"6"15" x 24" x 42" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc6aa707dca410d5507dd31253519e09/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c1bea2c3717d78b84fe2b10c705e8ac4/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7cd02f7865ba62f25227778d6c4ddf41/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fd3e171d61186052735aa69dc2ed84b5/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9007f7b5b74e1a7567e9c118e5701fcf/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/615d7062afe95689ff4d6f47b6488d1a/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a14f8c338f11c7d4990367a5a19166d8/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc89813b13a602556d9fce62d45d6a6a/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7e493fe074129967549938ffa74ce58c/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/80f3c54744778bf4884d9c3743080d9f/original-used-diacro-hand-operated-floor-model-bender-model-1-a-with-tooling.jpg2025-10-10 19:51:28 UTC7977930E.D. Bosworth & Son.0Equipped With: - Adjustable stroke - Cast Iron Base - Foot operated Pedal - Estimated weight 450 Lbs About the section ~ Famco bought out Royersford Excelsior, current day manufacturer. The machine is capable of many custom applications with the correct die / punch / trimming set including stamping, trimming, custom Mechanical Metalworking fabrication applications for the tool room . blacksmith, Jeweler and artisan home shop. Recently taken from service out of a local tool and die shop Providence R.I. Now located at Gold Machinery 136 Newell ave Pawtucket 02860. The machine has been inspected / tested here at our facility and is offered in excellent condition! Tooling, Die dish and Shank holders are available at additional cost please enquire with your specific needs Including 5/8”Shank holder Priced @ $100 each ½” shank Shank holder Priced @ $100 each 3/8” shank Shank holder Priced @ $100 each Die dish Priced @ $150 each We will palatalize and strap and cover Priced @ $100. Shipping is additional or on your shipping account.PressesFoot & Arbor Pressesused779507Pawtucket, RIhttps://www.goldmachinery.com/listings/7977930-used-e-d-bosworth-son-warren-ri-metalworking-forming-stamping-2-5-ton-punch-press22" x 24" x 60" high2-1/2 tonsin soft steel: 1/2"22" x 16"13/16" diameter2"6"3"360 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f57b64ce9470ca4cccb6d7d22dbc0213/original-used-famco-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef186b3472e4d3da81fb168ae3f39384/original-used-famco-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/741a500ad682e5a95abf0a6abbaa0d0d/original-used-famco-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6a33691e226f4e41be57fc376196e269/original-used-famco-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/610a0959d66886f6c2fecf4761069db0/original-used-famco-10.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4f609617a8214bd05f647bf1f58deb2e/original-used-famco-10.jpg2025-10-10 19:56:17 UTC7977956C Williams0Equipped with Heavy duty metal standCNC, Metalworking & ManufacturingMetalworking Equipmentused779508Pawtucket, RIhttps://www.goldmachinery.com/listings/7977956-used-c-williams-hand-operated-floor-model-metal-working-slitter-providence-r-i4"5"6" x 7"26" x 14-1/2" x 46"250 Lbs (with base)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/14be2bf67bb2dff954284e16be0edd8a/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6bd9166aadba170b8cf07fcae85e1fec/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f56365315d1ef9fc1cc06e6d10dd6464/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b371de5bf4d5747f10c6e5f0252d8dd5/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d40a14ab2c673c8701576d6875c9152f/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/497346eee500a23374f4780db230327c/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc1613fd41c5f8c5f6f07822655c68a6/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/545d186f59434894c31b9d119be42105/original-used-e-d-bosworth-and-son.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/50267af79b223b531f6aee6a63ae24b4/original-used-e-d-bosworth-and-son.jpg2025-10-10 20:39:33 UTC8087992South Bend8183C0Equipped with: - Steady rest - Tailstock with a #3 Morse taper, - 3-jaw chuck. - 4-jaw chuck. - Taper attachment - Tool holders Cutting tools - SOUTH BEND 10k 3C COLLET DRAW BAR, SPINDLE ADAPTOR AND COLLET SET - Taper Attachment Included Accessories: V-belts, flat leather belt, face plates, forged steel tool post, thread cutting stop, centers, spindle sleeve, wrenches, quick-change gear box, 3-jaw chuck, steady rest, and taper attachment Features Engine Lathe: A versatile metalworking machine designed for turning, facing, and threading operations. Manual Operation: Uses hand levers for feeding the cross slide and compound rest. Tailstock: Can be moved along the bed to support workpieces between centers and has a quill for drilling or other tools. Quick-Change Gearbox: Allows for easy changes in the threading and feed rates. Adjustable Collars: The compound rest and cross-feed screws have graduated collars for precise measurements.Toolroom & General MachineryLathesused779509Pawtucket, RIhttps://www.goldmachinery.com/listings/8087992-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183c-w-taper-attachment-tooling220 / 3ph / 60 Cycle14-1/2 inches6 feet36-1/2 inches8 speeds, 27 – 800 RPM1.5 HP motor#3 Morse Taper4 – 224 TPI (threads per inch)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/69e01fa2075a83a19a60fb765d95ffd4/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c43c837dc19f06e1fbc6874ff7170c39/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9f48083aec53dd37c41f7795788de60f/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5a5119366aea2124f7406e60abeb723/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/106b6af646c18a15c59327c999d9b732/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f92041fdcc430dcedf5920bd30d8fb98/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c04411064ccbbb3a0e1844b19345e39e/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/274b3fa47343906cf1517b8644a0f188/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3573f7b9e45c10754f26c556456ce58e/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2e5ccd2e593518831e61529506747eb6/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae4f4708f080895070ca45370305ea60/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f78e3985ee942467639e544d19aa279/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c7f160430ef87aac51e3db76a91e5c8d/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/025600a548cf37fa82eeda818ecaea87/original-used-south-bend-14-1-2-x-38-heavy-duty-precision-lathe-model-8183-c-w-taper-attachment-and-t.jpg2025-11-03 12:53:04 UTC8088002ReidNo. 2-B0Feeds Longitudinal table feed is automatic Reversal of table is controlled by adjustable dogs Traverse table feed is automatic with a range of .006 to .110Toolroom & General MachinerySurface Grindersused779510Pawtucket, RIhttps://www.goldmachinery.com/listings/8088002-used-reid-no-2-b-6-x-18-3ph-reciprocating-grinder-with-b-s-magnetic-chuck220 / 3ph /60 Cycle 36018" long 6" width and 11"h using a 7" wheel 3" standard hole 5" X 10"Brown & Sharpe33" x 37" x 75"1400 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1dffe26605f8a3a366aa681a7ea01384/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e8cc6261327f792d15d34997a29a072c/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/42b4828b670b287e30f102cd4968248e/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8132a6abfd7eb9f5609362748fcd11a4/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d6bf6ff943ae7b9012440092389c6a1f/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a621793d8f41e09f639b55616cec070c/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c17e779aac67d9fcf8526aab28e75751/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1faf973f7ac24abdd62a360447f3d3b7/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2d65af3c11085634c66da09100fecd5e/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b02932d3b2c502be1c7ad2b2d96c0bc1/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc2785b9ef54bdb4933641ac9c38382d/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/55d64a5cce00ef16e0770104878303d0/original-used-reid-no-2-b-6-x-18-3-ph-reciprocating-grinder-with-b-and-s-magnetic-chuck.jpg2025-11-03 13:03:12 UTC8088004Ideal Tool & Die Co.With Work LampToolroom & General MachineryMiscellaneous Machineryused779511Pawtucket, RIhttps://www.goldmachinery.com/listings/8088004-used-ideal-tool-die-company-duplex-die-punch-filling-machine110v 1ph/50/60 cycle9" to 1 1/2" Safety friction drive 9-3/4" x 9-3/4"15" x 23" x 23"110 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/439575da99374dab3dd7b1c2fedc1d56/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/41340e59b028e485720d4e55b94566ce/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ab73c644e77fc37e8b43e9f89d94d9e6/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3c0629aa74ef26a986f60f8bb34b7969/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/26f0829ebf249f9900c2e901398a9e17/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8abe478282bd21c7b4690b2de74cae71/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1ed43ecd93788e2fc15a100d0644984a/original-used-ideal-tool-and-die-company-duplex-due-and-punch-filling-machine.jpg2025-11-03 13:09:17 UTC8135069New HollandK-90c0Equipped with - Safety interlock switches the motor off when the lid is opened - Cover swings in either direction for ample loading clearance - Heavy-duty construction of arc-welded steel means years of trouble-free service - Exhaust outlet is conveniently located for direct drain connection or drip pans - Foot brake stops the spinning action quickly Recently Re-worked here at Gold International Machinery - New Replacement cost for this Model K-90, 208V, No Heat is Priced for $ 11,795.00Polishing, Finishing & PlatingUltrasonics and Centrifugal Dryers & Chip Wringersused940274779512Pawtucket, RIhttps://www.goldmachinery.com/listings/8135069-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer220, VAC at 60Hz, 3-phase625 rpm2 hp18" x 18"150 Lbs.2, tapered roller2 V-BeltsArc-welded Steel Platehttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/45a4f54b616018c071c6442ff9af5f13/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6fdf21ebd4e871fafa472dc70e89fd3d/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/740396516b1b51a6d0c88a469ce4aefe/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/942afe671858883628f95d948a4149f8/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3aeba0ef4ca46eb0fca3d87a1186453e/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5cd76bf2fb69f123cacb64e970c52be3/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2293454e444c01cbb6dc1f15d8295e21/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f20384db64fd0323fc2acae8d435903d/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9ade5ff02f87016bb0b271b05b33c7c9/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/be84e955e2e8dd2b2497015ee5c851a5/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd66c7492a7549f7d5704a926beed8a1/original-used-new-holland-model-k-90-18-x-18-centrifugal-dryer-chip-wringer.jpg2025-11-10 14:49:42 UTC81375612025JetGHB-1236GEAR HEADED BENCH LATHES The JET GHB-1236 Geared Head Bench Lathe is engineered to cut and taper with exacting accuracy. Positioned on a heavy-duty stand with a newly added built-in footbrake, the GHB-1236 features precision induction hardened ground bed-ways, spindle roller bearings, and high-quality steel hardened gears in the headstock for ultimate working durability. JET Geared head bench lathes are designed with an enclosed gearbox for smooth, quiet operation. precision roller bearings that support the hardened and ground spindle resulting in tight tolerances.Toolroom & General MachineryLathesnew779513Ex-Factoryhttps://www.goldmachinery.com/listings/8137561-jet-ghb-1236-12-x-33-bench-lathe-with-geared-head-2hpSingleGeared Head7.12007.12 in331-9/165-1/28.75008.75 in1275D1-4140058 in30 in0.4000360.4 in5MT3MT3.50003.5 in600.001930660.04720.0472 in0.0014 in0.0014000.01160.0116 in7.50007-1/21818.000018 inhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0198c22d51bc43ab34b07f5d4291f816/original-used.jpg2025-11-11 20:00:25 UTC8167932BridgeportEquipped with: - Power table feed - Work vise - #2 Morse colletsToolroom & General MachineryMillers, Verticalused779514Pawtucket, RIhttps://www.goldmachinery.com/listings/8167932-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine20"9"16"9" x 32"275, 425, 700, 1050, 2100, 42503-1/2"1/2 HP1500 Lbs54" x 54" x 74"https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a139296bf89c07d7a56361e76747f24a/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/100090dfcc2797931421ce2563b65cd5/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c294023f890f00f278420d54594eb22/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb1f7d9fb7ea14a71a31bd34a12a9a1f/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/084a16a92e117c9b87cc06d15cda0f1c/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/23901d2b81d1ebfa7763293ab810c875/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe1912c44459b2f578540a5721f95ef1/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbd416b162493cc8571528a7cdc40f86/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/79362bf49bc93f7bbe3c1caa9edb0a6e/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e88b3e44db2599ae72491b201d89a422/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b15e2111ae0ed1dc7a55227b87fa32b8/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/debf86cfc6d20fe9da8cfc6f908175ae/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/31c3a47e2ee03917aaae8862f4bcd7a8/original-used-bridgeport-9-x-32-1-2-hp-6-speed-ram-type-vertical-milling-machine.jpg2025-11-18 15:44:44 UTC8167934Torit84With Foot operated shaker bag systemToolroom & General MachineryDust Collectorsused779515Pawtucket, RIhttps://www.goldmachinery.com/listings/8167934-used-torit-3-hp-cabinet-dust-collector-model-84460V/ 3PH/60HZ875-12317.30" - 5.00 (w.g.)4460 - 6281 FPM6" diameter3-1/2" x 9-3/16"3 HP150 Sq. ft.2 cu ft.28.5" x 28.5" x 47-5/8"3890 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2ab2b942e0ca71b1b7440c6916c13bd1/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a2099acc7bb10bb2af9df291126edd77/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2aaf9a54422bbdea983191c74ebad6ad/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9263303120baf92618a5d2b77c13fcb2/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5b9b04ad259d053a0e4d9f646d922a53/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/263ad39902909e460dda962383aca298/original-used-torit-3-hp-cabinet-dust-collector-model-84.jpg2025-11-18 15:49:54 UTC816794020150- Baileigh DC-1450C - Year of MFG 2015 - Specifications: - Item Number: DC-1450C - Shipping Weight: 295lbs - CFM: 1450 - Dust Collection Port: 6" x 4" - Number of Outlets: 2 - Drum Capacity (Gallon): 28 - Remote Start: Yes - Power: 220V Single Phase - Horsepower: 2 - Noise Level ( @ 3 meters): 76 dB - Shipping Dimensions (Inches): 48x45x46 Equipped with - Remote for dust collector - ManualPolishing, Finishing & PlatingPolishingused779516Pawtucket, RIhttps://www.goldmachinery.com/listings/8167940-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450c-2hp-dust-collector220- 3Ph 60 Cycle 1 HP, Ball Bearing motors 3600 RPM10"49" x 25" x 55"Includedhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5ae8b67a7c9ae16ac6b4f2c1562e7e57/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d93c8c2ff4662992c5171d2590b6c93d/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba2404f5b07e77dc821b0bc000b36d8b/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d52e9cca3064c850ebbac90e2b16ec0/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dcb74678c28ba795a7ea3d09c72ff2ca/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4b2051c23d8395517f00a56eb3a332e0/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ba97d5fc33a2e8172dfb2832942cf545/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/534027191fe30d45ea6fa71c577cc894/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/acbfd1787929a484b9dd3dd716ad7bc6/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e84ced9cfd640046fa5aed6cac4619bf/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d3c14558478bcb5559979f14fc7e91ce/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fbe742a6b516fc5bacbe493fc0641f03/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15e27428651b60f3025262d79737b09b/original-used-dual-polishing-benches-4-station-system-with-baileigh-dc-1450-c-2-hp-dust-collector.jpg2025-11-18 15:58:33 UTC81711272025FastiRCL0LASER ROPE CHAIN MAKING MACHINE Machine on stand, single phase power supply, variable speed, forced lubrication, wire end and chain presence sensor, electronic chain collecting plate, equipped with focusing head and focusing head support, air for laser fumes cleaning, binocular support group. Machine is predisposed to be utilised with laser unit. Use of compressed air is necessary.Chain Making/ManufacturingChain Making Machinesnew779517Monza, Italyhttps://www.goldmachinery.com/listings/8171127-fasti-model-rcl-laser-rope-chain-making-machine230V 50/60Hz400W0.30 - 0.80 mm0.30 - 0.50 mm90RPM80 x 177 x 96cm320Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d9057d2072171af67aa6270f6fdfd85/original-fasti-model-rcl-laser-rope-chain-making-machine.jpg2025-11-19 16:19:19 UTC8171150Mirro-BriteMB-1500EQUIPPED WITH: - Factory steel stand - Material unload chute - A flow-through water system for enhanced wet finishing - Tank size 24" x 24" x 41 with chem-feed pump Commonly used for: Aerospace: Precision components requiring fine surface finishing. Medical & Pharmaceutical: Small surgical or implantable parts. Electronics: Micro-components and circuit board finishing. Automotive: Small machined parts and trim polishing. Jewelry: Gold, silver, brass, bronze, shell, stone, and custom jewelry objects. Machine Shops & Job Shops: Ideal for lean manufacturing and cellular setups.Polishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779518Pawtucket, RIhttps://www.goldmachinery.com/listings/8171150-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system110V/1PH/60HZ1-1/2 cubic foot22-1/2"Variable speed driveRubber50 to 700 lbs.1 HP, 1725 RPM1400 to 2900 RPM, variable350 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0dc4ddc287cd4abbe9d51292fa638dd3/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46c8b7b655e2ac68f591ed64daae0f4c/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fede2255cb7b8d2aa21416962c00eca0/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4873d2b225958dd40761160a9441b872/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a426ce2aa7d294cdff0ad1cb59928343/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f310a630c7f44c081ed808c1f7a47d9c/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/654e60d2f76e0808e9b14354944aa6da/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpg2025-11-19 16:40:06 UTC81914532010ItalimpaintiFIM/10NT0Wire, Plate & TubeMelting Furnacesused1090779519Pawtucket, RIhttps://www.goldmachinery.com/listings/8191453-used-italimpianti-fim-10nt-induction-melter-melting-oven-furnace-new-2010220 Volt, 3 Phase10 kW9.5 kW101015T/O3800FRIGO 1520485 x 510 x 915216 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6506bb6e54e891c6d6b40a41e6df7802/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d5fa61fec03ee7af462e195180718c6b/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8d874e00a96984c231cf0994563434e6/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/13a3c106f45ccea605c2bbd6a81085c8/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/573a0ed8ec9640109a45e5258ffeb6fa/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63eb1380c8a1d839235162dd43b1d459/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f5efeb748277cbfc8bb0c5d559d1e5e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cb22e16f6892de0673ffd37b8d0d76d4/original-used.jpg2025-11-25 13:07:29 UTC8191487TEKCAST0Equipped with - Independently Suspended Bottom Platen - High Quality, Precision Built Steel Construction - Independent Dual Temperature Controls - Separate Temperature Controls for Each Heated Platen - Fast, Efficient, Long Life Heaters - Compact Footprint - 20 ton Hydraulic pump and jack About section Vulcanization is a necessary step to prepare the uncured silicone mold for spin-casting production. Under controlled heat and pressure the silicone slowly cures to a heat resistant, flexible, permanent mold. TEKCAST’s 3-Post design ensures that the heating platens stay parallel during vulcanization and produce parallel, accurate molds. Additionally, in the unlikely event a unit requires calibration, it is a simple and easy process. Our Vulcanizers are jam-free as the bottom platen is independently suspended on the hydraulic jack ram. For the home business hobbyist / jeweler / craftsman, to produce fishing lures, jig, sinkers and Jewelry related items -Belt Buckles. low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead). We have much more available equipment tested and ready to work. Including Charles Hones pewter melting furnaces, Casting Machines, Mold frames 9",10",12". Available for additional cost from Gold International Machinery-Rhode Island's one stop shop for all machine needs.General Jewelry MachineryCasting Machines & Equipmentused779520Pawtucket, RIhttps://www.goldmachinery.com/listings/8191487-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-casting230V 50/60HZUnique 3-Post Design14"18" x 18" x 38" high700 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d90cdb1e3479664906265da5448f332c/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/00ddfbf23ceda1ff80d5988ab2b33c45/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f0b478a28d0f447cc9bfce2989c4fc4d/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3477618e41a7f1d9e41539074c4f2006/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7889ffa79195e47acf065783984d3d39/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/390d1c9fc075f8f2d8839ef0818ad2b5/original-used-tekcast-precision-3-post-14-platen-vulcanizing-press-for-white-metal-rubber-mold-spin-c.jpg2025-11-25 13:15:58 UTC8191523Contenti0Equipped With: - Partlow temperature control - Hood - Metal Stand For melting low-melting metal alloys (zinc, tin, bismuth, eutectic alloys and lead). We have much more available equipment including Casting machines , vulcanizing units, Mold frames 9",10" and 12"All in stock at Gold International Machinery-Rhode Island's one stop shop for all machine needs.Wire, Plate & TubeMelting & Continuous Castingused779521Pawtucket, RIhttps://www.goldmachinery.com/listings/8191523-used-contenti-160lbs-gas-fired-melting-pot-with-thermostat-hood-for-white-metal-casting110 Volt160 Lbs28" x 19" x 40" H180Lbs https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c316d784c9362e8f52fd62a2536e938a/original-used-contenti-160-gas-fired-melting-pot-with-thermostat-and-hood-for-white-metal-casting.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b04fb9cbd9dd99f427fd5b6b82a1c03f/original-used-contenti-160-gas-fired-melting-pot-with-thermostat-and-hood-for-white-metal-casting.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cdeb8c3f0815b1d6d3d051d6ee225f35/original-used-contenti-160-gas-fired-melting-pot-with-thermostat-and-hood-for-white-metal-casting.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d540861ef0f411c7180b40007d2e6049/original-used-contenti-160-gas-fired-melting-pot-with-thermostat-and-hood-for-white-metal-casting.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5d6b7ba36ccb2cd870ee8830f5d658e/original-used-contenti-160-gas-fired-melting-pot-with-thermostat-and-hood-for-white-metal-casting.jpg2025-11-25 13:26:41 UTC8194063EFD22000Equipped With: - Charge, test, power push buttons - Original owners Manual - New replacement Tooling set - Fusion energy meter - Weld control gauge - Balance gauge - Capacitor selectorsGeneral Jewelry MachineryWeldersused779522Pawtucket, RIhttps://www.goldmachinery.com/listings/8194063-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling115V/1PH/60HZ14" x 15" x 17" highhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a09f2ffa46d4c669fb0bf4deb8169c74/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/03b8b9c6aab022f351ec1c14a2c8df6a/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f336ba7bfaca87704029c067460df7af/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b5e09e7aab1e50fefe00d58294444cd3/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fe5a5cf7dfa8f85aed165f84cbcf5003/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/60073fd9e685f25d9acfdb7034588ef7/original-used-efd-electron-fusion-earring-stud-jewelry-welding-machine-model-2200-with-tooling.jpg2025-11-26 16:27:49 UTC82003892026GB BertoncelloSigma PlusSPECIAL ELECTRIC PLANT FOR ANNEALING AND THE CONTINUOUS DEOXIDATION OF STRIPS WITH UNWINDING AND WINDING FROM REELS, WITH 2 INDEPENDENT WORKING LINES. EACH LINE HAS AN HEATING CHAMBER WITH TWO INDEPENDENT HEATING ZONES, WITH INSTANT COOLING IN WATER AND LINE DRYING. THE PLANT IS COMPLETE WITH A TURN-OFF TANK IN WATER AND AIR BLOWERS, WITH GROUPS OF UNWINDING AND WINDING OF THE SPEED-ADJUSTABLE REELS. ELECTRICAL CONTROL PANEL OUTSIDE THE FURNACE.Wire, Plate & TubeOvens / Furnaces / Dissociatorsnew779524Monza, Italyhttps://www.goldmachinery.com/listings/8200389-gb-bertoncello-sigma-plate-continuous-annealing-plant-for-strips230 V - 60 Hz - 3 ph1500 mm950 °C22115 kW10 mm70 mm0,10 mm0,80 mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/63c1df27c5d409f235fec282523c9f0d/original-used.jpg2025-12-01 14:38:46 UTC82292682026LocatelliT.400 4CLocatelli Meccanica specializes in the design and manufacture of high-precision hydraulic presses, offering both standard and customized solutions. Thanks to its operational flexibility, the company is also capable of developing special-purpose presses and fully automated production lines tailored to meet specific customer requirements. With a longstanding commitment to service quality, Locatelli Meccanica has built extensive expertise in metal sheet processing, delivering a wide array of solutions, including fully robotized systems for the complete automation of the production cycle. Continuous investment in research and development, along with the progressive enhancement of its production facilities, has enabled the company to significantly expand its product portfolio and achieve strong market penetration at the international level. Advantages and Features: - Sliding table on the four columns; - 7 guiding points; - Strongness and reliability proved; - Wide touch screen display (HMI); - Step-by-Step programming; - Electronic proportional valve for the pressure settings; - Multiple pressing; - Ramps of pressure for the working speed; - Moulds Safety Program; - Teleassistance; - Reduced dimensions for a perfect integration in every working place; - Complete line of all accessories; - Certification according the European Safety Rules – CE Mark.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779525Monza, Italyhttps://www.goldmachinery.com/listings/8229268-locatelli-400-ton-precision-hydraulic-press-t-400-4c-minting-coining-press400 Tons18 Tons250 mm/s4 mm/s340 mm/s0.005 mmYesOptionalOptional285 Bar420 KgYesYesYesYesYesYesYesYes18,5 KWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bb553cb1b7f6db820aa99518bb2fcac/original-Pressa_4_colonne-removebg-preview.png2025-12-09 14:24:19 UTC82292752026LocatelliT.600 4CLocatelli Meccanica specializes in the design and manufacture of high-precision hydraulic presses, offering both standard and customized solutions. Thanks to its operational flexibility, the company is also capable of developing special-purpose presses and fully automated production lines tailored to meet specific customer requirements. With a longstanding commitment to service quality, Locatelli Meccanica has built extensive expertise in metal sheet processing, delivering a wide array of solutions, including fully robotized systems for the complete automation of the production cycle. Continuous investment in research and development, along with the progressive enhancement of its production facilities, has enabled the company to significantly expand its product portfolio and achieve strong market penetration at the international level. Advantages and Features: - Sliding table on the four columns; - 7 guiding points; - Strongness and reliability proved; - Wide touch screen display (HMI); - Step-by-Step programming; - Electronic proportional valve for the pressure settings; - Multiple pressing; - Ramps of pressure for the working speed; - Moulds Safety Program; - Teleassistance; - Reduced dimensions for a perfect integration in every working place; - Complete line of all accessories; - Certification according the European Safety Rules – CE Mark.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779526Monza, Italyhttps://www.goldmachinery.com/listings/8229275-locatelli-600-ton-precision-hydraulic-press-t-600-4c-minting-coining-press600 Tons34 Tons420 mm/s4 mm/s400 mm/s0.004 mmYesOptionalOptional285 Bar480 KgYesYesYesYesYesYesYesYes30 KWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bb553cb1b7f6db820aa99518bb2fcac/original-Pressa_4_colonne-removebg-preview.png2025-12-09 14:34:59 UTC8274907Usages: For rings, bangles, bracelets with proper holding devices (not included) 1-1/8" diameter for tool holding attachment EQUIPPED WITH: - 90-degree slide attachment for tool holder - 360-degree radius cross slide with 4" travel - Work lampChain Making/ManufacturingDiamond Faceting Chainused2720-110Pawtucket, RIhttps://www.goldmachinery.com/listings/8274907-used-goldpro-bench-model-single-head-diamond-faceting-machine 220V/3PH/60HZ3"3"21" x 22" x 28" high130 lbs.https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a257521cbde00f944b953616b5d7dba2/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6288f1608803257512e954ecac95122e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/440c0af8d906e9a2c8bc6ca6ef1ef414/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/860ffdf51ba105b5966c611e9458f7d3/original-used.jpg2025-12-12 20:59:54 UTC83141032010ItalimpaintiMSLR/B0Used for crushing, rolling and annealing samples of metals during the assay process. This machine has three important characteristics: a hardened steel anvil for crushing metal samples, a motorized rolling mill (with control pedal) fitted with 52x100 mm rolls, and a small electric heated plate with water cooled contacts.Wire, Plate & TubeMelting Furnacesused779527Pawtucket, RIhttps://www.goldmachinery.com/listings/8314103-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b750x450x1300 mm (length-width-height)1-2 lt/1’1.5 kW220 Volt, 3 Phase120 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e99addd03dd8ecdd52104568010bba4d/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/04884d52710e3c390bd354ae4740e3f0/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8ef90b9d3fd653b890dcbe32102f6b2d/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/888ac51971786914166fcd5e3b42562c/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1eddb80b9acd808a96fb7956a3898c37/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/fdc15fd8bf1bf50c508b5777a0546d5f/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ff1eeb9c86ed5bcbd5b960ab1dd74848/original-used-italimpianti-cupel-sample-treatment-unit-type-mslr-b.jpg2025-12-23 13:22:47 UTC83141112009ItalimpaintiTRB/A0The bench drill is used to take samples of precious metals to be assayed.Toolroom & General MachineryDrill Pressesused779528Pawtucket, RIhttps://www.goldmachinery.com/listings/8314111-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand16 mm1280 mm71 mm160 mm300 mm280 - 2380 rpm220 Volts, 3 Phase, 0.88HP51 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/547eb6c06f4f20ec318c3155b21704ca/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/620ed99bc8634e25d498ea6e9bcc0603/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9d3e556903659038117b9784dfcca092/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ca629b1ad790fd4680173edbef8aea81/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/53b5bd8d2b7758dd276052bb6ec63417/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a63787cd3da1aa16ce112441a6ed2e7f/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77a632323b5cfd09643fd868dbb274f9/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/15961168a02f224b60df6b805f991394/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/593f560efd5407ffd9ee24efd3b66582/original-used-italimpianti-precious-metals-benchtop-drill-press-type-trb-a-with-stand.jpg2025-12-23 13:29:16 UTC83141172010ItalimpaintiFCOPP/A0The silicon carbide heating elements have a maximum power output of 3 kW on each of the 3 heating groups for the FCOPP/A and 4 kW for the FCOPP/B. The power on each phase is electronically controlled which avoids manual regulation and increases the life of the heating elements. The new FCOPP furnace has a stainless steel structure with insulated walls and a cooling system consisting of 3 fans that allow the flow of hot air towards the upper part of the furnace, thus facilitating suction. With this new thermal insulation, the external surface temperature of the furnaces does not exceed 70-80 °C. This new model also has a slightly larger muffle compared to the previous version and can now accept up to 6 cupels per row; the FCOPP/B version can hold up to 10 cupels per row. The loading door has been designed and equipped with an articulated quadrilateral device which means that an electric motor can now be installed to automatically open/close it.General Jewelry MachineryBurn-Out Ovens / Furnacesused779529Pawtucket, RIhttps://www.goldmachinery.com/listings/8314117-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010980 x 850 x 1850 mm9 kWThree-phasen.6 Ceramic heating elementsn.18, diam. 25 mm165 x 230 x 80 mm500°C1350°C475 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b462a60c2a283af49e2848fd157880d/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d65b16cd4fd10cb91c3360a9ff58fe5c/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77abacc554c6ee5f4ce97c87fd08cb02/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/110666767c1229db85e5cfd252d0fab3/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/346b4762c6ebbfafea89886ffd2b6c41/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/187c9d3e74f87793065608490cfb4264/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/21442576d3604e601a699c2401f8dcc9/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/36378a359ec2c7d6de9dd7e4423bce11/original-used-italimpainti-cupellation-furnace-type-fcopp-a-new-2010.jpg2025-12-23 13:36:49 UTC83141202010ItalimpaintiTLF/5000The tower is used to neutralize acid fumes. It is made out of polypropylene sheets and has a sprayer to spray a 600 mm thick layer of raschig rings inside of the main body of the scrubber. A second 200 mm thick layer of raschig rings has been placed above the sprayer. A container for the neutralization solution is positioned beneath the tower and has a pump to recycle the solution. This scrubber is also fitted with a special vacuum system used to load and transfer acid solutions to and from our gold refining plants, model IAO10.Refining EquipmentFume Scrubbersused779530Pawtucket, RIhttps://www.goldmachinery.com/listings/8314120-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010Three Phase0,25 Kw653 x 700 x 2165 mm (length-width-height65 Kg220 m3https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/744aedf3a811048078941399d8096799/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8f23dc82f615e9d58c1686eed3027485/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd7f9a31baa86e413c716ac76088e291/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c2fcbf39c5dd97880e06ed0ce4968f91/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/145fa142ca021d5058284a7f5a45c4d1/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/989ee278f9c23581d2f13afd85b3f59c/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd9bfc40d85b28bc02fd628831cdb985/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bd7c0dcfbad807ae62483f4eb78fdf41/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/eb99c5ecf69663656063f02617073dbc/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/88138bfa619172877dbe26fcf49dab17/original-used-italimpainti-fume-scrubber-for-acid-fumes-tlf-500-new-2010.jpg2025-12-23 13:42:18 UTC8314126Shor7500Polishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779531Pawtucket, RIhttps://www.goldmachinery.com/listings/8314126-used-shor-model-750-1-2cu-ft-vibratory-tumbler-finishing-machine110 Volts3/4 HP1750 RPM19.75"17"6.5"6.5" 24" x 20" x 28"120 LbsWater Drain & Dump Porthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7a74ad05aede1fe86fbc92df1a5f90c3/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e5a3ae72b87befae4100d1338c4dec74/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/12654e1e7fcaf1ded4b44d3de7c10e59/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/165f150c6f821a68d427ba733cc429b0/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/83eb475279944b83fb7938811b7fbe3f/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f718f25a2bb64bb8bae11ba6c6a15fb5/original-used-shor-model-750-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpg2025-12-23 13:49:57 UTC8314128UltramaticAdvantage0Polishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779532Pawtucket, RIhttps://www.goldmachinery.com/listings/8314128-used-ultramatic-model-advantage-1-2cu-ft-vibratory-tumbler-finishing-machine110 Volts3/4 HP1750 RPM19" 17"7.5"6.5" 24" x 19" x 29"120 LbsWater Drain & Dump Porthttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cd95f1797214a6c51f961bb816edfca2/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dc6a7b54ea83076ee6bd85c23ffe8aa6/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0878d5d1e18d8ddaa1fdfa036dc7e124/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9b4fae930ff2fd6ce65115a6c0b86769/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e81905068cf0e102f1b3d93c50eb2d0e/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f5b59600d054b4a858adf75c7f8b479f/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cac378e64db8e0519247a5e74c749de2/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/093323338e625b50c74f3e1c0b35cb41/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6f80d9b77dd7fbbf121245a98ebe9754/original-used-ultramatic-model-advantage-1-2-cu-ft-vibratory-tumbler-finishing-machine.jpg2025-12-23 13:54:18 UTC8314133Mirro-BriteMB-1500EQUIPPED WITH: - Factory steel stand - Material unload chute - A flow-through water system for enhanced wet finishing - - Tank size 24" x 24" x 41 with chem-feed pump Common Uses: Aerospace: Precision components requiring fine surface finishing. Medical & Pharmaceutical: Small surgical or implantable parts. Electronics: Micro-components and circuit board finishing. Automotive: Small machined parts and trim polishing. Jewelry: Gold, silver, brass, bronze, shell, stone, and custom jewelry objects. Machine Shops & Job Shops: Ideal for lean manufacturing and cellular setups.Polishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779533Pawtucket, RIhttps://www.goldmachinery.com/listings/8314133-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system110V/1PH/60HZ1.5 Cu Feet22.5"Variable Speed DriveRubber50 to 700 lbs.36"1HP, 1725 RPM1400 to 2900 RPM350 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a88ad0d71184c97de7c2de4a4f31e460/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/34c830407450ea44c6c26ca77b395f8d/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/58389b632b870584166fc8893d7672d2/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/28b1ee1134a991c05d90605c2295a23f/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5c2b8b130e92815b25dc4c0077302f47/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d0bb68bb4396514cccb5258a013cebc/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/672d5639e09d732eae768e2bfa1c3ed6/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ce873b2af426f24d20e85b25801eb461/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/95003c66bac7cef05779c87286eac375/original-used-mirro-brite-vibratory-finishing-machine-model-mb-150-with-flow-through-water-system.jpg2025-12-23 14:02:33 UTC83405812010ItalimpaintiFIM/20TPU0The furnace is ideal to melt precious metals. All ITALIMPIANTI ORAFI induction-melting furnaces are fitted with static frequency converters. A high efficiency of the electrical output that drastically reduces electricity consumption, maintaining the production rate, is obtained by the frequency conversion system used. The modular construction of the electric circuit board greatly simplifies maintenance operations and guarantees high reliability even in the most demanding working conditions. The highest technical standards used to design the inductors along with the modular construction and the use of only high-quality materials guarantee maximum production even in the worst conditions. - The converter is fitted with a centrifugal pump to recycle the cooling water, fitted with a - pressostat, thermals, fuses and a timer to automatically stop the pump. You require only a storage tank for demineralised water or a water-cooling plant. - Interchangeability of the crucible to melt different precious metal alloys - Display monitoring of the working parameters of converter as voltage and absorbed power. - Computerised alarm diagnostics for as many as 12 alarms or warnings that the worker must take note of for the system to work properly. Instructions and advices are shown on the display. - Closed ring power regulation, which allows the system to absorb the set power regardless of the quantity and type of metal to melt. - The internal environment of the converter is conditioned by an air-water exchangerWire, Plate & TubeMelting Furnacesused1091779534Pawtucket, RIhttps://www.goldmachinery.com/listings/8340581-used-italimpianti-fim-20tpu-mechanical-tilting-medium-frequency-induction-melting-furnace3 Bars15 lt/min9000 Kcal/h0.9Three phase2 - 4 KHz20 kW700 x 1300 x 2000 mmBy hand-wheel system15-20 minutes25 Kg Silver / 40 Kg Gold 18 kT220v 3PH 50/60 cycle 30° + 35°Chttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cbb752be836133f937f4432fcf14a6cc/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f3c65d85828a778170223e9838be29a7/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/90bcb98bd82c51a9c3cd1b6f0480a115/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b0308a4274da2f8be631ba5ec857517/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/a8fef2a9bbbf711970930ddcbbd7a983/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b75b2a6915272bcd0b034f5c011e07ba/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1c90aa8865609758619d9dc6688be4b4/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8247ddd90c39475dbcd8a0aba4985e8e/original-used-italimpianti-fim-20-tpu-mechanical-tilting-medium-frequency-induction-melting-furnace.jpg2025-12-31 17:14:15 UTC83612952026MG450This 30Kg Model is Equipped with a Graphite Plug System, Stainless Steel Water Tank, and an Automatic Lifting System The metal granulator is applied to produce various metal grains, such as gold, silver, K gold, copper, etc. The metal granulator includes three parts: the furnace, the water tank and the loading frame. The molten metal will flow through the pure graphite comes with multihole at the bottom, and the whole granulation process is protected by inert gas argon or nitrogen, which minimizes the oxidation of metal. The gold granulating machine & silver granulating machine are the most commonly used models. The metal granulator is equipped with an argon flow protection device. During the melting & granulation process, argon protection will be injected to prevent the oxidation of precious metals to the greatest extent. while if the customer plan to cast K gold grains, then we will recommend using vacuum granulating machine to prevent oxidation. click here to get more information about the vacuum metal granulator. We can customized different metal granulator for customers according to different metals, different capacities, and different production efficiency for each client, please inquire. Features: - The granulator is used to produce high-quality precious metal particles and alloy particles with uniform color. The finished beads have no oxidation, high density and no pores, especially good spherical surface, uniform particles and stable color. - The metal granulator comes with Inert gas protection system, which minimize the oxidation in the process of metal melting and casting, especially suitable for precious metals and alloy metals that are easily oxidized. It also reduce the loss of smelted metal and increase the life of the crucible. - Applied with the Intermediate frequency induction heating technology, rapid melting speed, it takes about 15 minutes to melt one batch, and the casting time is about 15 minutes, which means that you will get high-quality metal grains within half an hour. - The temperature can reach 1600°C, the granulation time is 20-30 minutes once, and the melting and granulation are completed in one. After the casting is completed, the pelletizing barrel is easy to take out. - Pure graphite crucible comes with quartz jacket as protect, the multihole design at the bottom can act as breaker to make the molten metal cast into grains, what is more, It only takes 5 minutes to replace new crucible which is very convenient for the operator - Special cooling water to prevent adhesion of metal particles and make particles more evenly formed. - Metal granulator melting chamber and water tank can be designed separately or as an integrated unit, if there is not enough space for the user, we will recommend the integrated unit, which takes up less space. - The detailed and complete self-diagnosis system and protection function ensure that the equipment failure rate is low. - After the melt is completed, the casting speed is fast, making the metal particles smooth and smooth without sand holes. - 2 Year Warranty A gold silver granulator is a specialized machine used to produce high-quality gold granules, which are essential for applications in jewelry making, electronics, and industrial processes. One of the key components of a gold silver granulator is the **graphite crucible with a stopper rod**, which plays a critical role in controlling the flow of molten gold and ensuring consistent granule production. Below is an overview of the structure and functionality of this system. 1. Graphite Crucible The graphite crucible is the core component of the gold granulator, designed to withstand high temperatures and chemical corrosion. It is made from high-purity graphite, which offers excellent thermal conductivity and durability. The crucible is responsible for holding and melting the gold or silver - Material: High-purity graphite ensures minimal contamination of the molten gold or silver. - Design: The crucible is typically cylindrical with a tapered bottom to facilitate the flow of molten gold. - Heating: The crucible is heated using an induction Heating furnace to melt the gold or silver at temperatures above 1,064°C (1,947°F). 2. Stopper Rod System The stopper rod is a precision mechanism that controls the flow of molten gold from the crucible into the granulation chamber. It consists of several key parts: - Rod Material: The stopper rod is also made from high-quality graphite or ceramic to withstand high temperatures and resist wear. If the material is easily contaminated by graphite, we will also use boron nitride material as the plug rod - Sealing Mechanism: The rod fits tightly into an opening at the bottom of the crucible, creating a seal to prevent molten gold from leaking. - Actuation System: The stopper rod is connected to a manual or automated control system (e.g., pneumatic or electric actuator) that allows precise adjustment of the rod’s position. This controls the flow rate of the molten gold. 3. Granulation Chamber Below the crucible and stopper rod is the granulation chamber, where the molten gold is transformed into granules. This chamber typically includes: - Cooling Medium: Water is mostly used to rapidly cool the molten gold droplets, solidifying them into granules. - Collection Tray: A tray or container collects the solidified granules for further processing. The granulator adopt the automatic lifting up tray to collect the granules, which can greatly reduce the cost the the production labor. 4. Control System The gold granulator is equipped with a control system to regulate the melting and granulation process. This system includes: - Temperature Control: Ensures the gold is melted at the optimal temperature. - Inert Gas Flow Control: Adjusts the Inert Gas Flow Rate to get the most shinning and fine granules. - Automation: Advanced granulators may feature automated controls for precise and repeatable operation. 5. Advantages of the Graphite Crucible with Stopper Rod - Precision: The stopper rod allows precise control over the flow of molten gold, ensuring uniform granule size. - Durability: Graphite components are highly resistant to thermal and chemical degradation. - Efficiency: The system enables continuous and efficient production of high-quality gold granules. Summary: The graphite crucible with a stopper rod is a critical component of a gold and Silver granulator, enabling precise control over the melting and granulation process. Its robust design and high-temperature resistance make it ideal for producing consistent, high-quality gold granules. By understanding the structure and functionality of this system, manufacturers can optimize their granulation processes and achieve superior results.Coining, Bar & Ingot MakingGrain MakingnewCDOMG45Ex-Factoryhttps://www.goldmachinery.com/listings/8361295-grain-making-machine-gold-silver-30kg-capacity-with-automatic-lifting-system380V – 3 phases - 60 Hz45 kW AdjustableGold, Silver, Copper15 to 18 minutes per cycle30KG Ag1600 Degrees C64" x 61" x 76" H900 Lbshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1254ba71aed6de2080eb5c8cd402f01d/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4fdc4149cae0dbc4782c0018bf528a58/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0f7088857a5dc0e83709c9a09e60b2f9/original-cdo-cast-grain-making-machine-gold-and-silver-20-kg-capacity-with-automatic-lifting-system.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/9fc493866894773fbd3dedaf44904568/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/48c04c11b28dd747e94a1abd1914f2fc/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8a0ef5b22f3ded040ddfe8f72b116f67/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0d4a280db88d62e2c33c193ed16c4695/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/095126a10e257e26690e47dceed0ea3f/original-cdo-cast-grain-making-machine-gold-and-silver-10-kg-capacity.png2026-01-09 14:26:47 UTC83614352026CDOHT75- With Thermocouple testing system - Simens Touchscreen Control - With Integrated power supply cabinet Equipped with various safety alarm functions, over-current, over-pressure, water shortage, high temperature alarm, in case of emergency, the furnace can automatically stop running to guarantee the operation safety. Crucible Size: - Upper Outer Diameter: 340mm - Upper Inner Diameter: 280mm - Bottom Outer Diameter: 200mm - Total Height: 365mm Hydraulic Tilting Furnace Mechanism: - Capacity Silver: 80KG - Crucible Silicon Graphite Crucible - Hydraulic tilting & steel frame furnace body - Remote tilting control system - Hydraulic power supply complete with valves, pump motor fluid, tanksWire, Plate & TubeMelting FurnacesnewHT75Ex-Factoryhttps://www.goldmachinery.com/listings/8361435-silver-induction-melting-hydraulic-tilting-furnace-80kg-ag-capacity1600 Degrees C80Kg Silver (Ag) > 1500Hz75Kw20-25 minutes380v, 3 Phase, 60Hzhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7c08142cc88956e9674990f724a15af5/original-inductotherm-50-kw-3200-hz-vip-power-supply-with-inductotherm-no-60-lift-swing-furnace.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/cf2a1fba2ef321ab6adb8674efa1a71f/original-inductotherm-50-kw-3200-hz-vip-power-supply-with-inductotherm-no-60-lift-swing-furnace.png2026-02-27 13:20:28 UTC84094582025Baltestri Technologies SRLBT-EL-AG-060-RThe electrolytic silver refining process involves: - the anodically dissolution of impure silver - an electrolyte solution - the cathodically deposition as pure silver. The unit is able to work on 24 hrs basis. PLEASE CONTACT US FOR A FULL QUOTERefining EquipmentGold Refiningnew779535Monza, Italyhttps://www.goldmachinery.com/listings/8409458-silver-electrolytic-refining-plant-60kg-capacityAccording to country of installationMin 12 kg/cell approx (1 anode) Max 144 kg/cell approx (12 anodes) Total max : 288 kg (24 anodes)Up to 30 kg/cell, Total: 60 kg/DAY4kWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b1ee98932f550130036be9dee4aed5b8/original-silver-electrolytic-refining-plant-60kg-capacity.png2026-01-19 14:13:21 UTC85200942026Summit20″ x 60″Toolroom & General MachineryLathesnew779536Ex-Factoryhttps://www.goldmachinery.com/listings/8520094-summit-20-x-60-toolroom-lathe-geared-head-10-hp-220-440-vToolroom3Geared Head13.0 in60 in411.5 in30.002032D1-8150063 in44 inhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8eba55ce7f11cf9bb2fbf4357a8b6e09/original-3172247-21.jpg2026-02-09 20:56:01 UTC8528333- Process Timer - Automatic Internal Separation - Urethane Lined Tub - Flowmeter - Variable Speed Drive Motor - Internal Separator (1” Screen) Documentation. Includes two sets of Installation/Operation/Service Manuals. Manuals have step- by-step instructions for installing and running the machine, and include all component data sheets, maintenance schedule, recommended spare parts list, and all mechanical and electrical assembly drawings. An additional set of electrical drawings is included inside the machine's main electrical enclosure, and all assembly drawings are available in electronic format. New Bearings Installed, Fully Tested & Functional.Polishing, Finishing & PlatingFinishing Machines / Tumblers, Vibesused779537Ex-Factoryhttps://www.goldmachinery.com/listings/8528333-used-refurbished-alco-or-40v-round-bowl-vibratory-finishing-machine460V / 3PH / 60HZhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bb6b0db2fd7487f2ef37c026c309eeb3/original-used.jpg2026-02-12 15:59:16 UTC85286922026Ferrara200KG0Additional Details: Panel Board: Will be equipped with all necessary switches and controls for efficient operation. The panel will be wired and instruments will be tested before leaving our plant. Cooling System: Cooling system specially designed pressure less cooling chamber including prevision flow meter control to monitor accurately the cooling and water temperature gauges with micro-processor control to activate the alarm system. Water pressure control is also interfaced with the alarm system. Withdrawal System: The withdrawal mechanism is designed with mechanical and hydraulic interface. The motor drive is controlled electronically with processor pulse. Crucible: Manufacture from high purity. Graphite is machined to precision tolerance. Dies: Casting Dies are precision manufactured from high density graphite.General Jewelry MachineryMelting & Continuous Castingnew779538Pawtucket, RIhttps://www.goldmachinery.com/listings/8528692-continuous-casting-machine-200kg-capacity-for-gold-silver-copper200Kg9" wide(228mm) 3.75" Diam(100mm)180Kg per hour208 / 220 / 240, 50-60 CY94.82641350 C (246o F)Heavy duty HR steel construction with removable top.The heating element is constructed of silicone carbide. The element is designed to provide trouble free life. The element has a unique design the easiest and shortest way to replace. (normal replacement time is 15 min. with Furnace HOT)The furnace chamber contains multiple courses of high quality refractory and thermal efficiency.Internally the Furnace operates under atmosphere inert gas. This will minimize oxidation of graphite crucible and die.Multi Zone heating system for better heat curve accuracy.Microprocessor temperature control with time proportion and cycle rate calibrated for Type K thermocouple 0 to 2,300o F for close line control. (includes HI-Limit safety)40' ft x 8' ft x 7'https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/633ede60c1a19690cf138c2d25f01d7c/original-continuous-casting-machine-200-kg-capacity-for-gold-silver-copper.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1d5e6156ca98a4edbaabd5a39691666c/original-continuous-casting-machine-200-kg-capacity-for-gold-silver-copper.jpg2026-02-12 19:43:36 UTC8528824202650KG0Additional Details: Panel Board: Will be equipped with all necessary switches and controls for efficient operation. The panel will be wired and instruments will be tested before leaving our plant. Cooling System: Cooling system specially designed pressure less cooling chamber including prevision flow meter control to monitor accurately the cooling and water temperature gauges with micro-processor control to activate the alarm system. Water pressure control is also interfaced with the alarm system. Withdrawal System: The withdrawal mechanism is designed with mechanical and hydraulic interface. The motor drive is controlled electronically with processor pulse. Crucible: Manufacture from high purity. Graphite is machined to precision tolerance. Dies: Casting Dies are precision manufactured from high density graphite.General Jewelry MachineryMelting & Continuous Castingnew779539Pawtucket, RIhttps://www.goldmachinery.com/listings/8528824-continuous-casting-machine-50kg-capacity-for-gold-silver-copper90KgRectangular : 3.75" (100 mm) wide x .390(10mm) Thk Round: .5" Diam. ( 12mm )1" to 8" IPM ( 25 mm / 200 mm p/m)208 / 220 / 240, 50-60 CY441581400º C (2580º F)Heavy duty HR steel construction with removable top.The heating element is constructed of silicone carbide. The element is designed to provide trouble free life. The element has a unique design the easiest and shortest way to replace. (normal replacement time is 15 min. with Furnace HOT)The furnace chamber contains multiple courses of high quality refractory and thermal efficiency.Internally the Furnace operates under atmosphere inert gas. This will minimize oxidation of graphite crucible and die.Multi Zone heating system for better heat curve accuracy.Microprocessor temperature control with time proportion and cycle rate calibrated for Type K thermocouple 0 to 2,300o F for close line control. (includes HI-Limit safety)1525mm x 1219 mm x 1219 mm3500 lbs. (1587 kg)https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8468170582e3dda1399b3fcc2d8fb019/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8bbb72c0256a5e06c027fa70177a3f1b/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/1460e754653b1a2d3e5734cdb1b93945/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.JPGhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/705154c76bca9beb129b047f96e7a800/original-continuous-casting-machine-90-kg-capacity-for-gold-silver-copper.JPG2026-02-12 21:22:17 UTC85660772026Refining EquipmentSilver RefiningnewBT-EL-AG-120Monza, Italyhttps://www.goldmachinery.com/listings/8566077-silver-electrolytic-refining-plant-120kg-capacityhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1bf0622629451c2aa3668a630b6b3fe/original-used.png2026-02-23 16:52:42 UTC85737582026CDOCT40Siemens Touchscreen Control - All functions can be microcomputern controlled by touch screen. - Digital power adjustment and indicator. - High efficiency using a solid-state generator. - Self-diagnostics system. Stainless steel construction. - Control of the temperature (option) with thermocouple or optical sensor. Machine Features - C/W TWO temperature testing port -C/W argon protection - C/W silicon graphite crucible - Automatic Motor Tilting SystemWire, Plate & TubeMelting FurnacesnewCT40Ex-Factoryhttps://www.goldmachinery.com/listings/8573758-silver-induction-melting-hydraulic-tilting-furnace-30kg-ag-capacity1600 Degrees C30Kg Silver (Ag)40Kw, 3P, 380-420v, 50/60hz15-20 minuteshttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ed9ed1bec781f398a373ad331027c924/original-silver-induction-melting-hydraulic-tilting-furnace-30-kg-ag-capacity.png2026-02-27 13:32:02 UTC8574215TVNT2/P0Features: The machine is for the smoothing of the thread either coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines. Can also be activated through foot-pedal, it has a forced lubrication on the screw plates and a safety micro-switch on the reel.Wire, Plate & TubeWire-Drawing / Bull Blocksused779540Pawtucket, RIhttps://www.goldmachinery.com/listings/8574215-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input220 / 3PH / 60 CVariable 6mm silver, 5mm gold10/15%0-30 mt/13Kw1400mm x 530mm x 1100mm230Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/977c9426afdc4399a17e861d25b74185/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5fbae63943cddf817c8815a58784b305/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/615b9e743e0dd617ca8cc5c83a3c095f/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae945660764e80aa7fb8b778ba5a9ed6/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/77b5f0ea080b113b192ed0ac3f001306/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/68fd5d74952a457e22f3ecfff40609f8/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5d63d0ba6aaf4a49dec6617951186c48/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/daba6d825cdf97cf3fea5bf121573777/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/db89107a3ca5a1ad0f21a7431e79ff28/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7f75d12a113a343a0753a6cbef494689/original-used-tvn-model-t2-p-two-passages-bull-block-wire-drawing-machine-5mm-max-gold-wire-input.jpg2026-02-27 16:46:31 UTC85821642026CDOCDO-F10Craft Purity & Precision: The Future of Bullion Casting In the world of precious metals, every gram counts. Our advanced vacuum Gold Silver Bar casting machines are engineered for those who demand perfection — delivering flawless, high-purity gold and silver bars with uncompromised surface quality and minimal metal loss. Vacuum Gold & Silver Bar Making Machine Whether you’re producing investment-grade bars or custom ingots, the vacuum bar casting machine offers unmatched flexibility and precision. Produce mirror-finish silver bars that stand out in the market. The silver bullion vacuum casting machines combine German IGBT induction technology with high-vacuum performance for industrial-grade reliability. Batch Capacity: Cast up to 8 x 1kg ingots per cycle or a single 15kg large bullion bar. Custom sizes are also supported. Vacuum + Argon Protection: Melt and cast in an oxygen-free environment to eliminate oxidation, porosity, and surface defects such as water ripples. Maximized Yield: With near-zero precious metal loss, our systems help protect your margins and enhance metal recovery. pect.Coining, Bar & Ingot MakingIngot/Bar MakingnewCDO-F10Ex-Factoryhttps://www.goldmachinery.com/listings/8582164-induction-vacuum-bullion-casting-machine-for-casting-up-to-8-pieces-1kg-per-cycle75Kw380v / 3 Phase / 50Hz1600 Degrees Celsius 5-8 Minutes5-8 MinutesSiemens PLC Touch Screen ControlPneumatic Control8 Pieces Per CycleNitrogen or Argonhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b7d067dc7fd88768c7869f257160daba/original-vacuum-bullion-casting-machine-for-casting-up-to-8-pieces-1-kg-per-cycle.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd3f917e599c995b44c8a9ce6b516360/original-vacuum-bullion-casting-machine-for-casting-up-to-8-pieces-1-kg-per-cycle.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4d8b8a67312ed54efb431b4e21a7b351/original-vacuum-bullion-casting-machine-for-casting-up-to-8-pieces-1-kg-per-cycle.pnghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/3b007ae4f39f8d3c3ef10f1d1e37ce51/original-vacuum-bullion-casting-machine-for-casting-up-to-8-pieces-1-kg-per-cycle.png2026-03-03 13:16:59 UTC85893302026Refining EquipmentSilver RefiningnewBT-EL-AG-60Monza, Italyhttps://www.goldmachinery.com/listings/8589330-silver-electrolytic-refining-plant-60kg-capacityhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/e1bf0622629451c2aa3668a630b6b3fe/original-used.png2026-03-06 14:55:39 UTC8597928Refining Equipmentused779541Ex-Factoryhttps://www.goldmachinery.com/listings/8597928-used-rrm-7-gold-precious-metal-refining-systemhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/8fcb2ee20dfb4f811eded6d7596148c4/original-used-rrm-7-gold-and-precious-metal-refining-system.jpg2026-03-11 12:49:23 UTC85980672026LocatelliT.800 4CLocatelli Meccanica specializes in the design and manufacture of high-precision hydraulic presses, offering both standard and customized solutions. Thanks to its operational flexibility, the company is also capable of developing special-purpose presses and fully automated production lines tailored to meet specific customer requirements. With a longstanding commitment to service quality, Locatelli Meccanica has built extensive expertise in metal sheet processing, delivering a wide array of solutions, including fully robotized systems for the complete automation of the production cycle. Continuous investment in research and development, along with the progressive enhancement of its production facilities, has enabled the company to significantly expand its product portfolio and achieve strong market penetration at the international level. Advantages and Features: - Sliding table on the four columns; - 7 guiding points; - Strongness and reliability proved; - Wide touch screen display (HMI); - Step-by-Step programming; - Electronic proportional valve for the pressure settings; - Multiple pressing; - Ramps of pressure for the working speed; - Moulds Safety Program; - Teleassistance; - Reduced dimensions for a perfect integration in every working place; - Complete line of all accessories; - Certification according the European Safety Rules – CE Mark.Coining, Bar & Ingot MakingCoining Presses, Bar & Ingot Making/Coining Equipmentnew779526Monza, Italyhttps://www.goldmachinery.com/listings/8598067-locatelli-800-ton-precision-hydraulic-press-t-800-4c-minting-coining-press800 Tons26 Tons380 mm/s3 mm/s370 mm/s0.004 mmYesOptionalOptional285 Bar610 KgYesYesYesYesYesYesYesYes30 KWhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/5bb553cb1b7f6db820aa99518bb2fcac/original-Pressa_4_colonne-removebg-preview.png2026-03-26 14:57:06 UTC85981062026W40P0What is Air cooled water chiller? Air-cooled water chiller is one of the models of water chiller, the normal temperature water will be cooled to a certain temperature through the compressor of the chiller to strengthen the cooling mold or machine, as a stand-alone use, the radiator is a built-in fan, there are three interconnected systems: refrigerant circulation system, water circulation system, electric automatic control system. The air-cooled water chiller model is compact, small and movable. Our water chillers are mainly used in the cooling of intermediate frequency furnace and continuous casting, mainly applied in the process of lowering the temperature of the power supply furnace, to protect the whole equipment from the damage of high temperature. Sometimes, it is also used in the cooling of semi-products cooling. Features: - The compressor unit adopts vortex type hermetically sealed compressor and electric control components, and is equipped with condenser and evaporator made of high quality copper tube for heat transfer and high efficiency. - Our water chiller Equipped with all kinds of safety protection devices, stable performance, low noise, long service life, simple operation; the use of liquid crystal display man-machine interface, simple and convenient operation, operating conditions at a glance. - The water chiller are equipped with single compressor or multi-compressor combined refrigeration system. The compressor can automatically alternate the operation according to the load change and balance the running hours of each compressor to save energy and extend the service life of the chiller set. It is convenient for energy adjustment and more energy-saving at partial load. - The whole water chiller designed with shell box structure & attractive appearance & compact structure, the chiller can be checked at any time; the chiller comes with its own water tank and circulating water pump according to the cooling capacity, without the need for installation of cooling tower and cooling water pump, installation and maintenance is simple and convenient.Miscellaneous MachinerynewW40PEx-Factoryhttps://www.goldmachinery.com/listings/8598106-new-air-cooled-water-chiller-model-w40p1550 Kg30 m3.5kW40,000 m3/hHigh-efficiency copper tube with aluminum fins + low-noise external rotor fanExternally Equalized Thermostatic Expansion ValveR22 / R410ADN65 (2-1/2")380LTank coil type / plate heat exchanger + tank20.3 m3/hHermetic Scroll36kW43.3kW106,984 Kcal/h (124.4kW)220v, 3 Phase, 60Hz2550mm x 1200mm x 2130mmhttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/4c423717fa7c79ad36a6f0c6982449c8/original-new-air-cooled-water-chiller.jpg2026-03-11 14:23:13 UTC8665477Refining Equipmentnew779542Ex-Factoryhttps://www.goldmachinery.com/listings/8665477-tower-type-gas-cleaning-system2026-03-23 13:50:33 UTC87158182026FastiSB20SB20 MACHINE FOR LOOSE BALLS Model suitable for tube production of medium-big size balls, ovals and barrels by simply changing tools. Machine on stand, three phase power supply, variable speed, forced lubrication and tube end sensor. Use of compressed air is necessaryChain Making/ManufacturingBeads and BallsnewSB20Italyhttps://www.goldmachinery.com/listings/8715818-fasti-sb20-bead-ball-making-machine-medium-to-large-diameter230 Volts6.00 - 20.00 mm25 Balls Per Minute6.5Kw113cm x 107cm x 196cm1075 Kghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6b221c1e0316516430de4baf728a1c47/original-fasti-sb-20-bead-ball-making-machine-medium-to-large-diameter.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46441300c3490955fa999e4a78138660/original-fasti-sb-5-bead-ball-making-machine-small-to-medium-diameter.jpg2026-04-02 14:39:41 UTC87299252023ItalimpaintiIAO/BR50ITALIMPIANTI ORAFI spa IAO/BR50 PVDF ROTATING TUMBLER Aqua regia gold refining tumbler and silver nitrate production - Year 2023 Italimpianti Orafi aqua regia refining tumblers are a state-of-the-art solution for refining gold alloys and offer a quicker, more flexible and user-friendly approach compared to traditional static glassware units. This IAO/BR50 model consists of a Polyvinylidene fluoride PVDF tumbler with a total volume of about 100 litres, inclined to 30° and rotated by a motor, with the possibility to adjust the rotation speed. The rotation forces the gold grains to continuously rub against each other reducing the overall dissolution time. The tumbler has a useful capacity of about 50 litres (acids plus gold grains). A Pyrex glass condenser, connected to the fume outlet on the tumbler, condenses the acid fumes released during the process thus reducing the volume requiring neutralisation and resulting in a more efficient fume scrubbing operation. 7.5 kg of grains can be refined per batch with the possibility to treat two batches per standard working shift. Depending on initial composition, a purity of 999.5/1000 is guaranteed – higher purities can be achieved if starting parameters fall within certain restrains, like quantity of gold and silver present in the initial alloy. MAIN ADVANTAGES - Cheaper to maintain thanks to absence of expensive glassware. - Cheaper to run thanks to absence of heating jackets. - Maximum operational flexibility: refining with aqua regia or nitric acid inquartation - Reduced cost : advanced chemical compatibility of PVDF at a lower price than titanium - Optimized reaction time due to the possibility to integrate steam heating - More flexibility, able to handle a wider range of materials and alloys with higher silver contents. STANDARD SET UP - N.1 Polyvinylidene fluoride PVDF tumbler with a total volume of about 100 litres. - N.2 Graduated tanks for HCl and HNO3. - N.1 Filter unit on wheels fitted with compressed air diaphragm pumps to transfer the solutions. - N.1 100 litre precipitation tank. - N.1 Control panel. - N.1 Steam generator Power supply TECHNICAL CHARACTERISTICS - Overall dimensions (LxWxH): 2600 x 1200 x 2500 mm - Weight (approx.) 375 kg - Production: 15 kg/day (7,5 kg/cycle) ITALIMPIANTI ORAFI spa – TLF/750-N Fume scrubber for acid fumes with NOx pre-treatment (for Aqua regia refining) - Year 2023 The tower is used to neutralize acid fumes. It is made out of polypropylene sheets and has a nozzle to spray a thick layer of plastic rings inside of the main body of the scrubber to increase the contact surface. The fumes are mixed with air/oxygen before to enter inside the tower in a mixing pipe (NOx pre-treatment). The flowrate of inlet gas can be controlled by using an Inverter (OPTIONAL). The scrubber can be equipped with a pH meter to control the acidity (OPTIONAL). TECHNICAL CHARACTERISTICS - Tower Body dimensions 500 x 500 x 1350 mm - Washing Bed Height about 650 mm with Rings 1” - Pump Vertical Centrifugal Lenght 450 mm Power 0,75 kW - Fan 0,25 kW 230 V - Waste gas flowrate Max 600 Nm3/h - Inlet Diameter 160 mm - Outlet Diameter 160 mm - Washing solution Collecting tank 500 x 500 x 900 mm - Overall dimensions (LxWxH) 550 x 900 x 2500 mm - Weight (approx.) 100 kg ITALIMPIANTI ORAFI spa – IN/C Wast Water Treatment Plant - Year 2023 Water coming from the refining process can be treated with this plant which consists of: - n°1 tank complete with agitator to stir the solution to be neutralised - n.1 Filter press with pneumatic pump The filter press is used to filter the neutralised solutions and retain the copper, zinc etc. hydroxides. The components of the filter press, from the smallest to the largest, are single-block structures that are electrically welded, machined and carefully inspected; the design has allowed for very low stress levels, even under maximum operating pressure. The heads and longitudinal bars are plated with stainless steel or other metals depending on the chemical properties of the solutions to be filtered. The cloths, the shape and the dimensions of the plates, as well as the materials used inside the filter elements, constitute the most important part of a filter press. The choice of these elements is the result of years of experience on the part of those who are familiar with these problems. The pump is provided with an electronic level control probe for the automatic starting and stopping of the plant. TECHNICAL CHARACTERISTICS - Dimensions of filter plates 300x300 mm - Number of filter plates 8 - Capacity of treatment tank 380 litres - Power supply 400V | 50/60Hz - Polarity ThreephaseRefining EquipmentGold Refiningused817779543Pawtucket, RIhttps://www.goldmachinery.com/listings/8729925-used-italimpianti-iao-br50-aqua-regia-gold-refining-silver-nitrate-production-15kg-day15 kg/day (7,5 kg/cycle)220v 3ph 50/60hz https://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/7de2d4116863ff733ee2c26348c2bb6c/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2b774ce9c7ab7bb3384f7247f2895456/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/d13a4132c9463668b2b1f2bbf62d50f7/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/46a9322a095fec8f532248980371fde1/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/f65808198f6011b0d07b2508b1afdaaa/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/0c721c9cb39828933de9864a34168c61/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/c3f6d7fd64f656cc729755a1ce033e1c/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/99e2269ebc9dff7c3d11933013dd6421/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/51bcf062a93c220e74a9adfcaed198c5/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/bc63306daffbba7d99451beb9c473596/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ae84767b4ff3fc33b7d5cbe5f8d1beed/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/2be5f80ca3b006b69bf1fce27725245b/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/61c38e79f85056aac6e1484cd8669619/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/b54ae22da334bb33b477970955eb9c7e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/6689d5562d5449b3762462fa4b3bf12e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/dd06e4b153f9d1c73b7286abf6230a0e/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/699153a50a6b2a4e14e5fdfa502b445f/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/ef78df29505710c823941370fb073fdb/original-used.jpghttps://i.machineryhost.com/c37f36800219dcb5960c40d1d4bade55/894b7f9d90e8fc5c444bec0dab192096/original-used.jpg2026-04-08 13:06:33 UTC