Inventory Number: 3044-140
Technical Specifications:
- Casing dimensions- Diameter 1.5" Height .75"
- Weight of 50 Dies - 22 LBS
- Draw Sizes as seen / Marked on die in photographs
- Recently out of service
Applications:
Drawing dies are typically used in the drawing of wire, rod, bar, and tube. The materials that are drawn are typically copper alloys, aluminum alloys, and steel alloys.
Wire drawing dies are commonly used to reduce the diameter of various ferrous and non-ferrous rods and wires. Applications include various grades of low, medium and high carbon steels, steel alloys, stainless steel, welding wire as well as various non-ferrous rods and wires.
Tungsten carbide drawing dies give the wire manufacturer the ability to maintain uniform wire roundness, minimizing material usage and scrap.
Tungsten carbide dies are an excellent option for manufacturing ferrous rod-size wires. They are also ideal for short trial runs.
Imperial tolerances [inch] | Metric tolerances [mm] | ||
---|---|---|---|
Diameter | Tolerance | Diameter | Tolerance |
.0061 - .009 | +0 / -.0002 | 0.155 - 0.230 | +0 / -0.0051 |
.0091 - .052 | +0 / -.0003 | 0.231 - 1.322 | +0 / -0.0076 |
.0521 - .103 | +0 / -.0005 | 1.323 - 2.618 | +0 / -0.0127 |
.1031 - .295 | +0 / -.001 | 2.619 - 7.495 | +0 / -0.0254 |
.2951 - .500 | +0 / -.002 | 7.496 - 12.724 | +0 / -0.0508 |
.5001 - 1.000 | +0 / -.003 | 12.725 - 25.424 | +0 / -0.0762 |
1.001 - 7.000 | +0 / -.004 | 25.425 - 177.80 | +0 / -0.1016 |
Click On Images To View Full Size: