NEW TVN/Goldpro® Model TI100 Hydraulic wire-drawing machine 9000 KGF

Drawing speed: from 0 to 5 mt/1' min. adjustable independently from
the drawing power.Drawing speed adjustable with continuity through
the handle of the flow compensated regulator three-way, positioned
on the tank cover.Carriage return speed 10 mt/1' min. constant
(independent from the selected drawing speed).

Pre-closure power of pincers (power on the tube to draw) adjustable
with continuity from 100 to 2100 kgf, through the screw of maximum
pressure valve positioned on the cover tank. Maximum time
necessary for the complete closure of pincer: 1 second. Double
working way in automatic-manual selectable through the lever from
the control panel.

Automatic cycle: 1 pushbutton for the closure of pincer and
automatic starting of carriage after 1 second, automatic stop at endstroke,
1 pushbutton for opening the pincer and the automatic return
of carriage after 1 second, automatic stop at return end-stroke.
Movable end-stroke to draw a great quantity of bars with length
lower than 2 meters.

Manual cycle: 1 separate pushbutton for each manoeuvre (opening
and closure of pincers, go and return carriage).

Pushbuttons to start and stop the motor, safety stop, pushbutton to
stop the carriage in any position without stop the motor.

Construction standards in accordance to “CE” with respective
documentation.

Technical Data:

• Maximum drawing power 90000 Newton.
• Working stroke: 2 meters.
• Installed horse power 11 KW.
• Dinensions:
  • Pre-bench Length 2200 mm
  • Bench Length 2400 mm
  • Width 540 mm
  • Max Height 1750 mm
  • Approx.Weight 1200 kg