The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

NEW TVN Mod. T2/P Two Passages Bull Block Wire Drawing Machine, 5mm max gold wire input

Inventory Number: n/a

Technical Specifications:

The machine is for the smoothing of the thread either coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines. The machine has two speeds, can also be activated through foot-pedal, it has a forced lubrication on the screw plates and a safety micro-switch on the reel.

  • Wire input diam. 6 mm on silver, 5 mm on gold.
  • Reduction of section 10/15%.
  • Wire-drawing speed mt/1' 30/15.
  • Diameter on the winding point is 213 mm. (8.38in)
  • A special pincers allows to make easily the threading.
  • Construction standards in accordance to "CE" with respective documentation.
  • Installed horse power 2,2/1,5 KW.
  • Power supply 380 V. 50 HZ. Triphase.
  • Dimensions:
    • Length 1400 mm
    • Width 530 mm
    • Height 1100 mm
  • Approx.Weight 230 kg


Ex-Factory, Italy

You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]