The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

NEW TVN Mod. T2/4 Two Passages Bull Block Wire Drawing Machine, 7mm max gold wire input

Inventory Number: n/a

Technical Specifications:

The machine is for the smoothing of the thread of big dimension that coming out of the rolling mill or from the continuous casting furnace. This allows the thread to obtain the best and finest diameter in order to fit into the other multiple wire-drawing machines.

This machine is for the tube drawing to cap floating. The machine has two speeds, can also be activated through foot-pedal, it has a forced lubrication on the plate and a safety micro-switch on the reel. Diameter drag coiler 400mm.

Revolving protection on the work top with safety micro switch. Pressure roller in plastic material for containing the thread, with pneumatically operated.

  • Wire input max 8mm on silver, 7mm on gold.
  • Reduction of section 10/15%.
  • Wire-drawing speed 1-30 Mt/min.
  • Installed horse power 5,5 / 3 HP.
  • Power supply 380V. 50HZ Three - Phase.

Optional: Net filter for coolant, €290,00





Ex-Factory, Italy
Price: € 20.150,00Check the latest exchange rate



You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]