The New Holland Model K-24 industrial centrifugal dryer, you can thoroughly dry parts in basket loads weighing up to 75 Lbs (34 kg) in as little as 15 seconds. This is obtained from both air-drying and spin-drying at 825 RPM. Heavy-duty 12″ x 12″ (305mm x 305mm) baskets are used to handle the parts.
One person can easily operate the dryer with full efficiency and safety in five square feet of floor space. You can expect years of clean, quiet running operation from your centrifugal dryer with proper installation and regular maintenance.
Standard Equipment:
- Special 1 HP, 3 Phase, 60 Cycle-Ball Bearing TEFC motor
- Reversing control
- Electric interlock
- All units constructed to meet UL sanction
- Electric heat units come with a 3,000/4,000 watt heat element
- Dryer units include 5 1/4″ exhaust outlet
Technical Specifications:
- Overall Height: 36.5″
- Work height: 30.5″
- Floor Space Required: 24″ x 37″
- Weight: 400lbs
- Operating Speed: 825 rpm
- Motor Size: 1 hp
- Basket Size: 12″ x 12″
- Capacity: 75lbs
- Bearings: 2, tapered roller
- Reversible Control
- Drive: 2 V-Belts
- Construction: Arc-welded Steel Plate
- Electrical System: 208, 220, 440 or 550 VAC at 60Hz, 380 VAC at 50Hz, 3-phase
- Heating Unit: (Optional) Electric, steam
- Amperage: Starting and operating amperage varies with voltage selected
- Grease fittings exposed
Available Features:
- Optional Soft Start Control provides a smooth, stepless, reduced-voltage acceleration to minimize scarring and scratching of delicate parts. Tailor the initial torque and timing to your operation; then readjust for different parts loads as needed
- Safety interlock switches the motor off when the lid is opened
- Cover swings in either direction for ample loading clearanc.
- Heavy-duty construction of arc-welded steel means years of trouble-free service
- Exhaust outlet is conveniently located for direct drain connection or drip pans
- Foot brake stops the spinning action quickly
- Optional electric or steam heaters may be mounted in the cover
- Optional timer provides more control of drying time cycle
- Reverse the direction of rotation to remove all moisture from cup-shaped parts
- Optional variable speed control (inside control box) lets you control basket rotation from ten rpm up to the rated operating speed
- Optional temperature control lets you maintain heat within a controlled range to protect heat-sensitive parts
- Simple controls permit quick, easy operation
- Rust- and acid-resistant epoxy paint stands up to corrosive rinses and harsh conditions
Factory Installed Options are available at an additional cost:
Please let us know if you would like to add on to your purchase!
- 208V, 1 HP Variable Speed Control: $3,855.00
- 230V, 1 HP Variable Speed Control: $3,855.00
- 380V, 1 HP Variable Speed Control: $3,945.00
- 460V, 1 HP Variable Speed Control: $3,945.00
- Note: Variable Speed Controller Not Available for 575 Volts Units
- 208/230V Soft Start Control Package: $2,345.00
- 460/575V Soft Start Control Package: $2,555.00
- Note: Soft Start is not available in 380 Volts Units
- Timer for Standard Control: $925.00
- Timer for Variable Speed Control: $925.00
- Temperature Control (electric heat units only): $935.00
Heavy Duty 12×12 Baskets are available at an additional cost:
Please let us know if you would like to add on a basket to your purchase!
- Carbon Steel Baskets
- #4 Mesh, .080 Wire Size, 1/4″ Average Openings: $260.00
- #8 Mesh, .063 Wire Size, 1/8″ Average Openings: $305.00
- #10 Mesh, .047 Wire Size, 1/16″ Average Openings: $300.00
- #16 Mesh, .028 Wire Size, 1/32″ Average Openings: $295.00
- Stainless Steel (#304) Baskets
- #4 Mesh, .080 Wire Size, 1/4″ Average Openings: $520.00
- #8 Mesh, .063 Wire Size, 1/8″ Average Openings: $540.00
- #10 Mesh, .047 Wire Size, 1/16″ Average Openings: $500.00
- #16 Mesh, .028 Wire Size, 1/32″ Average Openings: $520.00
- Polypropylene (with stainless steel handle) Baskets
- 1/8″ perf: $244.00
- 3/16″ perf: $265.00
- #40 Mesh, .015 opening: $428.00
Model K-24 Unit Pricing:
- Model K-24, 208V, No Heat: $8,205.00
- Model K-24, 208V, Electric: $9,335.00
- Model K-24, 208V, Steam: $9,200.00
- Model K-24, 230V, No Heat: $8,205.00
- Model K-24, 230V, Electric: $9,335.00
- Model K-24, 230V, Steam: $9,200.00
- Model K-24, 380V, No Heat (50 cycle): $8,590.00
- Model K-24, 380V, Electric (50 cycle): $9,725.00
- Model K-24, 380V, Steam (50 cycle): $9,465.00
- Model K-24, 460V, No Heat: $8,205.00
- Model K-24, 460V, Electric: $9,335.00
- Model K-24, 460V, Steam: $9,200.00
- Model K-24, 575V, No Heat: $8,335.00
- Model K-24, 575V, Electric: $9,555.00
- Model K-24, 575V, Steam: $9,430.00
Model K-24c Chipwringer Pricing:
- Model K-24c, 208V, No Heat: $8,205.00
- Model K-24c, 230V, No Heat: $8,205.00
- Model K-24c, 380V, No Heat (50 cycle): $8,590.00
- Model K-24c, 460V, Steam: $8,205.00
- Model K-24c, 575V, Steam: $8,335.00
