Unlike other low output generators commonly used for this purpose and generally equipped with valves, this furnace produced by Italimpianti Orafi is unique on the market in that it works at medium frequency using high output generators. These offer a higher level of safety concerning harmful high frequency emissions and guarantee an energetic mixing of the alloys otherwise not possible.
- Working temperature up to 2000°C
- Possibility to use crucibles made out of different materials such as graphite, clay-graphite, silicon carbide, zirconia silicate, ceramic etc.
- Automatic temperature control by immersion thermocouple or optical pyrometer.
- Automatic power control regardless of quantity or type of metal
- Computerised alarm diagnostics available in four languages. Alarm messages appear on the display along with trouble-shooting guide lines.
- Automatic turn-off function for the furnace and cooling plant if not used for a certain amount of time (useful at the end of the working day)
- Circuit-check function on keyboard for an easy, guided remote control.
- Pouring can be done by manual extraction of the crucible, tilting by handwheel or hydraulic tilting
Technical Data:
- power supply: threephase
- absorbed power kW: 30
- power output kW: 29.3
- capacity of zirconia crucible (kg Pt): 4 - 22
- capacity of zirconium silicate crucible (kg Pt): 4 - 21
- melting time at max load (minutes): 18
- temperature measurement: T/O
- required cooling power (frig/h): 21000
- chiller for 8 hours working: FRIGO121
- on board pump: yes
- minimum water flow rate to coil @ 25°C (l/min): 30
- dimensions conv/tilt (mm): 1500 x 1200 x 1980, 1300 x 1200 x 1770
- weight: 1550 kg
Notes:
- The electrical connection must be on a three phase + (PE) network. The voltage used in your factory must be specified at the time of order
- Available with 2 interchangeable melting boxes A and B (A-B)
- T=thermocouple (type K,N,S): O=optical pyrometer
- The machine is supplied with an internal closed cycle deionization system permitting a simple connection between the furnace and an industrial water supply
Acessories
- Ceramic Fibre Paste FC700: € 37,80
- Gripping Device for Graphite Ingot Moulds: € 1.898,40
- 22 Kg Pt Graphite Ingot Mould: € 934,50
- 12 Kg Crucible for Platinum: € 352,80
- 22 Kg Cruicible for Platinum: € 368,55 Zirconia Cruicible for Pt 4 Kg: € 183,35 Holder for Cruicible Kg 4 Platinum: € 91,10 PAG Powder for Platinum Cruicible: € 7,40
Ex-Factory, Italy
Price: € 81,080,00
Packing: € 580,00
Check the latest exchange rate
