Technical Specifications:
Model FN100/A1 has two heating zones. The electrical resistances are made of wire capable of resisting temperatures beyond 1200°C. The muffle is built in refractory steel. The patented steel cooling chamber is designed to prevent condensate from dripping on to the items to be annealed or soldered. This chamber is cooled by a closed cycle cooling unit consisting of : stainless steel tank for decalcified water, a circulation pump and a water-water heat exchanger that needs to be connected to a water supply. The furnace is fitted with time switches to automatically turn on and off. When the temperature of the furnace goes above 350°C, the belt automatically starts up and the cooling water begins to circulate. When the temperature falls below 350°C, the belt and the cooling water automatically stop. Static power modules are used in place of traditional remote control switches. Propane , methane or butane can be used as protective gas for the two burners on the inlet and outlet of the furnaces. The protective mixture (H2 + N2) can be used from gas tanks or generated by an ammonia cracker.
Technical Data:
- power supply: three phase
- power: 16.5 kW
- max. working temperature: 1050°C
- belt width: 70 mm
- total length of heated zones (mm): 1160
- max belt speed: 4.5 m/1’
- thickness of refractory steel muffle: 4 mm
- int. useful dimensions of the muffle (mm): 70x46
- water consumption: 8 Nlt/1’
- gas consumption: 350 lt/h
- weight: 900 kg
- overall dimensions (mm): 940x5500x1100
Accessories:
- Sheet-Belt: € 124,00
- Muffle: € 1.250,00
- Cooling Chamber: € 995,40
- TR/FN Chain Feeder € 390,00
Ex-Factory, Italy
Packing: € 880,00
