- Forced lubrication on all wear points.
- Min. diameter balls 1,50 mm. Hole from 0,5 to 0,8.
- Max diameter balls 5,5 mm. Hole from 1 to 2.
- Plate thickness 0,15-0,38.
- Plate width 4,70-17,5 mm
- Max 180 balls/1′.
- Installed horse power 1.5 KW.
- Power supply 220 V. 50/60 HZ. 3PH.
Technical Data:
- Dimensions:
- Length 500 mm
- Width 600 mm
- Height 1800 mm
- Approx.Weight 380 kg
Accessories:
- Couple of dies 2/3 mm (sizes of holes at request) …€POR
- Couple of dies 4/5/5,5 mm (sizes of holes at request) …€POR
- Couple of dies for oval, drop, tear, bone, pearl, square …€POR
- Couple of dies 4/5/5,5 mm (sizes of holes at request) …€POR
- Couple of dies wire forming . …€POR
- Couple of pliers for feed …€POR
- Couple of die holder completely grinded with fixed shoulder …€PORe
- Outgoing aspiration for extracting balls …€POR
List of new sizes available…. Balls diameter from hole to hole Thickness tube 1.80 0.70 0.80 0.19 2.00 0.80 0.90 0.21 2.20 0.90 1.00 0.21 2.50 1.00 1.20 0.22 3.00 0.80 1.50 0.24 3.50 0.80 1.80 0.24 4.00 0.80 2.00 0.24 4.50 0.80 2.10 0.28 5.00 1.00 2.50 0.28 6.00 1.20 3.00 0.33 8.00 1.50 4.00 0.40 10.00 1.70 4.20 0.45 12.00 2.50 5.00 0.50 14.00 … 3.00 0.60 16.00 … 3.20 0.60 18.00 … 3.50 0.65 - Dimensions:
Ex-Factory, Italy
Listed price subject to manufacturers price increases without notice.