The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

NEW GoldPro® 180 mm X 250 mm Automatic Breakdown Rolling Mill Complete With Auto-Feed System, Model H25.SB Automatic 180mmx250



Inventory Number: famorH25

Technical Specifications:

Gears:
Made from case hardened high tensile alloy steel forgings Ring gear in hardened and tempered steel Tooth gearing is evaluated to give an optimum balance between tooth beam strength and maximum durability rating based on the dimensions of the gear set. The planet gears are crown shaved to give an ideal loading along the teeth , and are carried on needle rollers mounted on case hardened pins .
Planetary carriers:
Of high quality cast iron for strength and rigidity, to ensure equal tooth loading in the planetary gearing.
SHAFTS:
Made from case hardened tensile alloy steel to be more resistant to bending and torsion stresses and to maintain proper support and alignment of all gears even under the most critical loading conditions.
HOUSINGS:
The gearbox casing is of high duty cast iron for strength and rigidity.GROUP with motorized and programmable centring guide in according with your plate width. With this system is possible adjust the guide by brushless motor and save the position in a program.

GROUP shearing machine:
The hydraulic guillotine machine is in stand-by position during the working cycle and at the last step comes in working position for cut the plate at a programmable length.

Technical Data:

  • Steel Construction
  • Rolls Caged in Normalized Steel
  • Main Reduction Gear Type Planetary
  • ROLLS support in steel with bronze bearing
  • MOTORIZED upper roll movement with Brushless motor
  • PNEUMATIC SYSTEM FOR INLET AND OUTLET PLATE FOR COMPLETELY AUTOMATIC WORKING CICLE, WHIT TOUCH SCREEN DISPLAY
  • COOLING SYSTEM ON ROLLS
  • LUBRIFICATION OF ROLLS SUPPORT IS FULL AUTOMATIC THROUGT MOTORISED PUMP AND INJECTORS.
  • SAFETY DEVICES IN ACORDING WITH C.E. RULES
  • ROLLS DIAMETER 180mm
  • CYLINDERS WIDTH 250mm
  • CYLINDERS: HARDNED 66-67 HRC
  • CHEMICAL COMPOSITION OF ROLLS:
    • C=0,89 MN=0,42 SI=0,19 P=0,013
    • S=0,004 CR=1,87 MO=0,26 V=0,17
  • FORGED ROLLS WITH HEAT TREATMENT IN SPECIAL STEEL; EACH ROLLS WILL BE EQUIPPED WITH A CERTIFICATE OF QUALITY AND WORK ATTEST
  • MAX WIDTH 80 mm
  • MIN BEGINNING LENGHT 700 mm
  • MIN BEGINNING LENGHT 700 mm
  • MIN. THICKENESS 0,80mm
  • ROLLS SPEED (ADJUSTABLE) from 0 to 20 m/minute
  • MAIN MOTOR IN ALTERNATE CURRENT 25HP
  • VOLTAGES: 400V/50Hz
  • DIMENSIONS: 8960mm x 1777mm (3527in x 700in)
  • THEORETICAL WEIGHT 3300 KG
  • INSTRUCTION MANUAL IN ENGLISH LANGUAGE

Notes:

  • INCLUDED WORKING PLANE IN HARDENED STEEL AND GRINDING ROLLER
  • TABLE MOUNTED IN ALUMINIUM MAIN FRAME




Ex-Factory, Italy
Price: € 255.000,00

Check the latest exchange rate
Listed price subject to manufacturers price increases without notice.


To request additional information, price or shipping quotes or to initiate the purchase process, click the link below.


You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery Corp 2023

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 40, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]