8707 Used Manufacturing Cell for the Production of 4,50 mm Spring Rings

Item 8707-105 - Used Manufacturing Cell for the Production of 4,50 mm Spring Rings

• 220V/3phase/50-60Hz

System Consists Of 5 Machines:

• Spiral Winding Machine
• Machine that Solders Jump Ring to Body of Spring Ring
• Machine that Cuts Slot in Body of Spring Ring
• Machine Tooled to Wind & Cut Steel Spring
• Wire Forming Machine Tooled to Make the Bolt

TECHNOMECCANICA(ITALY) Spring Ring Making Pkg.

1. The spring ring package is tooled for 4 1/2 mm only, other tooling and training may be available from Tecnomeccanica.
2. The package does not include the equipment needed to make seamless welded tube , however, there is a tube winding m/c that is part of the system for non-soldered tube(lower quality spring ring making). You could use a set of dies and guides for the use of strip material on the winding machine to produce seamed tubing rings from OroMeccanica(Arezzo), the machine manufacturer, and the rest of the package machines were manufactured by Technomeccanica.
3. The package includes the equipment to produce all the components for the spring ring, the components are then assembled by hand.