The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

8148-375 Garrett Enforcer G1 Hand Held Pocket Scanner, Model 11616, S/N: 0982-057

Inventory Number: 8148-375

Technical Specifications:

  • Detects medium-sized pistol at 7"; large pocket knife at 5"; razor blade at 3"; hatpin at 1"
  • Red Alarm light and audible alarm indicates a metal target has been located
  • Easily slips into a shirt or coat pocket and can be held in the palm of the hand
  • Operating procedures written on panel
  • Rugged, high-impact plastic case designed to provide long, dependable service
  • Engineered to operate under rugged conditions
  • Automatic tuning, requires no adjustments
  • Automatic battery check
  • Optional recharging unit permits use of Ni-MH rechargeable batteries
  • Optional earphone for use in noisy or loud environments

Equipped With:

  • Operating Temperatures -35°F (-37°C) to 158°F (70°C)
  • Humidity: To 95% non-condensing
  • Operating Frequency: 90 kHz
  • Audio Frequency 2kHz
  • Tuning Automatic, no adjustments required
  • Indicators: Speaker, LED Alert Light (Red: ALARM condition)
  • Controls ON/OFF Momentary Switch
  • Battery: Single 9 volt battery provides up to 120 hours of normal operation. Optional NiMH rechargeable battery provides up to 35 hours on each 12-hour recharge

You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]