Item #6969-430
Technical Specs:
- 230V/3PH/60HZ
- Built 2000
- Work head motor/speed: 1/8 HP, 0-1800 RPM variable 90 volt DC, .375 belt pitch
- Diameters with other configurations then C5 (current): .020 - 6"
- Head angle: up to 40 degrees
- Table stroke: 0 - 2.75"
- Table speed: 0 - 34 RPM variable, 1/20th/ 90 volt DC
- Gear head in/lbs FL Torque: 53:1 ratio
- Auto feed cycle: 2-modes of operation, plunge and step
- Infeed: determined by motor speed 1 RPM - .07" depth set by micrometer setting with auto shut off
- Spindle SC-60 speed: 15,000 - 66000 RPM variable, 220VAC, 1.70 HP, 1.3 KW with 1/4 chuck
- Estimated weight: 700 lbs.
- Overall dimensions: 76" x 29" x 65" high
- Specifications subject to verification
- Machine is in working condition and completely functional
- Typical grinding results:
- I.D. Bore stock .032 removal
- Start high removal: .744 I.D. grind to .776, using a 10 - 120 grit diamond grinding pin,.375 O.D., RPM 45,000, min 45 sec.
Equipped with:
- Precise High Speed Grinding Spindle
- Operator Control Panel
- Recirculating Water chiller
- Work piece mist coolant system
- Work Bench
In Stock For Immediate Delivery
