NEW GoldPro® DCS High Speed 650 Ton Hydraulic Coining, Forging, Stamping Press

NEW Precision Built in the USA

• WEIGHT: 7,300 LBS.
• MOTOR HP: 20
• VOLTAGE: 240 3p 50/60 HZ.
• COMP. AIR: 1 CFM @ 60 PSI
• HYDRAULICS: VARIABLE DISPLACEMENT, ELECTRONICALLY CONTROLLED PUMP
• CONTROLS: MICROPROCESSOR, CLOSED LOOP. ALL PROCESS
  PARAMETERS ENTERED FRO TOUCH SCREEN
• CYCLES: JOG (SET UP)
  MANUAL (SINGLE CYCLE)
  AUTOMATIC
• SPEED: JOG- INFINITLY ADJUSTABLE
  MANUAL- 2 SECOND CYCLE AT FULL TONNAGE AND
  0.3 SE. DWELL
  AUTOMATIC- 20-30 SPM
• DWELL: 0.2 TO 9.9 SECONDS
• COOLING: AIR TO OIL HEAT EXCHANGER
• SPECIAL FEATURES:
  
  • METALLIC (AUTOMOTIVE STYLE) PISTON SEALS
  • COAXIAL JACK PISTON FOR SMOOTH RAPID APPROACH
  • LOW PRESSURE (4,800 PSI) HYDRAULIC SYSTEM USES COMMERCIAL HOSES, VALVES, ETC.
  • MULTI HIT FEATURE ALLOWS UP TO 3 HITS PERCYCLE AT DIFFERENT TONNAGES AND DWELL TIMES
  • PRESS CAN BE OPERATED CONTINUOUSLY AT MAXIMUM RATED TONNAGE
  • OIL TIGHT ENCLOSURE KEEP ANY MINOR OIL LEAKS INSIDE THE MACHINE, NOT ON THE FLOOR
• WARRANTY: 1 YEAR COMPREHENSIVE, 2 YEAR FRAME AND PISTON SEALS

SAFTEY:

• TWO BUTTON, ANTI TIE DOWN ACTUATION.
• ELECTRICALLY INTERLOCKED 1/2" THICK POLYCARBONATE (LEXAN)FRONT SHIELD.
• 1/2" THICK POLYCARBONATE REAR SHIELD
• THERMAL MOTOR PROTECTION
• OIL OVER TEMPERATURE SHUT OFF
• LOW OIL SHUT OFF
• RAM OVER TRAVEL PROTECTION

Notes:

• CE Approval Pending
• Precision Built in the USA
• Packing and Crating for Export Shipment $850.00