The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

2912-140 New GoldPro® Oromeccanica Automatic Ring Rolling System for Wedding Rings with PLC

Scroll Down To See Video!

Inventory Number: 2912-140

Technical Specifications:

This machine has been specifically planned for producing wedding rings of different shapes ( half - round, flat etc. ) with the internal diameter fixed in advance. For thi spurpose, we have used, as electronic plant of check, a gear- case (COMPUTER), which is able to control all the ma- chine functions. All this allows to check the internal diameter of the wedding ring, the number of the wanted pieces and the complete working cycle ( including the load and the unload of the pieces ). The machine workings are essentially two : automatic and manual. When you use the machine in the manual working, It is possible to program only one size and it is unprovided of the automatically load cycle of the piece. When you use the machine in the automatically working, it is possible to program more than one size to work and the number of the pieces for each size you want. This cycle is completely controlled from the computer, so that, once you put the information and the pieces in the automatically loader, you do not need the operator. When the working phase is finished, the machine will stop itself.

NEW 2018, In-Stock at Gold Machinery!

  • Serial Number 175
  • Model LAMFEAC
  • HEIGHT 1600 mm.
  • WIDTH 800 mm.
  • LENGTH 800 mm.
  • MIN. WEDDING RING DIAMETER 13 mm.
  • MAX. WEDDING RING DIAMETER 23 mm.
  • MAX. WEDDING RING WIDTH 13 mm.
  • DIAMETER OF THE ROLLING SHAFT 8 OR 10 mm.
  • DIAMETER OF THE ROLLING WHEEL 115 mm.
  • PRESSURE COMPRESSED AIR 5 Atm.
  • FEEDING 380 + N + T
  • POWER 2 kW.
  • WEIGHT 380 Kg.
  • WEIGHT WITH PACKING 480 Kg.


Click Here to View Ring Size Chart


Equipped With:

  • 1 Roller Groove 4MM
  • 1 Roller Groove 5MM
  • 1 Roller Groove 6MM
  • 1 Roller with Flat Rollwer
  • 1 Steel Pin with Point
  • 1 Steel with Point & Comfort 3MM
  • 1 Steel with Point & Comfort 4MM
  • 1 Steel with Point & Comfort 5MM
  • 1 Transformer to 220V, 150V with Box
  • 1 Casting Work for Rings 24k




Video:

New Cost: $91,617.00 USD


NOW PRICED FOR: $79,900.00 USD

Ex-Works, Gold Machinery RI USA



You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]