The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

2876-430 Brown & Sharp 10″ x 20″ Universal Cylindrical Grinder Model #1

Inventory Number: 2876-430

Technical Specifications:

  • 220-440 VOLT / 3 PHASE / 60 Hz
  • S/N: Serial 521-1-22
  • SWING OVER TABLE: 10"
  • DISTANCE BETWEEN CENTERS, NOMINAL: 20"
  • DISTANCE BETWEEN CENTERS, MAXIMUM: 22-3/4"
  • GRINDING WHEEL MOTOR: 2 HP
  • WHEELHEAD SPINDLE SPEEDS: INFINITELY VARIABLE
  • GRINDING WHEEL SIZE: 10" X 1" X 3"
  • SWIVEL AT THE WHEELSLIDE: 90 DEGREES EITHER WAY
  • WHEEL SPINDLE SWIVELS: 90 DEGREES EITHER WAY
  • HEADSTOCK MOTOR: 1/4 HP
  • INFINITELY VARIABLE SPINDLE SPEEDS: 60 TO 600 RPM
  • HEADSTOCK SPINDLE NOSE TAPER: A2-5"
  • HEADSTOCK SWIVELS EITHER SIDE OF ZERO: 90 DEGREES
  • INFINITELY VARIABLE TABLE SPEED: 3" TO 150" IPM
  • TABLE PER REV. OF HANDWHEEL:
    • SLOW: 0.1"
    • FAST: 1.5"
    • DWELL AT EACH OR ALTERNATE TABLE REV: 0 - 2-1/2 SEC.
    • TABLE SWIVEL, SCALES FOR ANGULAR SETTING: 8-1/4 DEG.
    • SCALES-TAPER PER FT.: 3-1/2" (25%)
    • AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER OR WORK
    • AT EACH OR ALTERNATE REVERSALS: 0.0001" - .003"
  • HAND FEED PER REV. OF HANDWHEEL:
    • SLOW: 0.1"
    • FAST: 0.3"
  • TAILSTOCK SPINDLE TAPER: #7 JARNO
  • TAILSTOCK SPINDLE TRAVEL: 5/8"
  • APPROXIMATE WEIGHT: 5,100 LBS



Equipped With:

  • HYDRAULIC TABLE TRAVERSE
  • AUTO INFEED
  • ADJUSTABLE TABLE DWELL
  • RIGHT OR LEFT END WHEEL MOUNTING
  • SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL
  • SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN
  • COMBINATION STRAIGHT AND TAPER GRINDING,
  • EXTERNAL OR INTERNAL
  • L.J. & R.H. GRINDING WHEEL COVERS
  • DUAL DEAD/LIVE HEADSTOCK SPINDLE
  • SELF-CONTAINED COOLANT SYSTEM
  • SWING DOWN I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE




Click On Images To View Full Size:


NOTE: A RIGGER IS REQUIRED FOR PICK UP / DELIVER OF THIS MACHINE.

PLEASE CONTACT US FOR DETAILS REGARDING FREIGHT

AVAILABLE EX-SITE, WALTHAM MA



You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]