The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

2545-410 Delta/Rockwell Ram Type Radial Drill Press, Model # 15-120

Inventory Number: 2545-410

Technical Specifications:

  • 230-460V/3PH/60HZ
  • S/N: 1754892
  • Spindle type: #2 morse taper
  • Capacity: 0-1/2" cast iron/ 0-3/8" steel
  • Column to spindle: 13" to 31"
  • Ram travel: 18"
  • Spindle nose to table: 2-5/8" to 13-1/8"
  • Vertical travel of head using raising mechanism: 10"
  • Column: 3-3/4" diameter
  • Table: 26"(W) x 18"(D)
  • Has 4 - parallel T-slots on 4" centers
  • 1-3/4" coolant trough all around table
  • Quill stroke: 6"
  • Quill diameter: 1-13/16"
  • Spindle speeds, 1725 RPM motor:
  •  175, 365, 380, 600, 695, 765, 1030, 1250,.
  •  1380, 1450, 2200, 2300, 2800, 4000,
  •  4750, 8200 RPM
  • Head tilt: 90 deg. ( 45 deg. Left/ 45 deg. Right)
  • Motor: 1/2 HP
  • Overall dimensions: 33" x 58" x 74" high
  • Estimated weight: 850 lbs.

Equipped With:

  • Push button switch
  • Cast iron stand
  • Head raising mechanism
  • Note: This drill press will drill to the center of 62" circle


Click On Images To View Full Size:


You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]