The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

2449-210 Sweco 1.2 Cubic Foot Batch Type Vibratory Finishing Mill, Model # FM1.2C

Inventory Number: 2449-210

Technical Specifications:

  • 230V/3PH/60HZ
  • S/N: 90262
  • Work capacity: 1.2 cubic feet
  • Weight load capacity: 360 lbs.
  • Maximum straight part length: 9"
  • Bowl width: 24"
  • Channel width: 5-1/4"
  • Channel depth: 7"
  • Motor: 1/3 HP, 1200 RPM
  • Overall dimensions: 24" diameter x 52" high
  • Estimated weight, empty: 220 lbs.
  • Usages: Deburring, flash removal, edge breaking, metal clean-up, rough surface work, prepaint finishing, descaling, burnishing, chemical treating, special surface effects, ball burnishing

Equipped With:

  • Vibralight bowl
  • Drain system
  • All cast polyurethane elastomer bowl  with 3/4" minimum thickness in high wear areas​


Click On Images To View Full Size:


You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]