The One Stop Shop for all of your
Machinery, Equipment, Tool & Die Needs
Gold International Machinery | The One Stop Shop for all of your Machinery, Equipment, Tool & Die Needs

2253-440 South Bend 9″ x 28″ Model # 444A Bench Lathe

Inventory Number: 2253-440

Technical Specifications:

  • 110V/1PH/60HZ
  • S/N: 145139
  • Swing over bed & saddle wings: 9-1/4"
  • Swing over cross slide: 5-1/2"
  • Distance between centers: 28"
  • Headstock and tailstock taper: # 2MT
  • Compound slide travel: 5-7/8"
  • Hole through spindle: 3/4"
  • Maximum collet capacity: 1/2"
  • Spindle type: 1-1/2" - 8 threaded
  • Spindle speeds: 50 - 1270 RPM (12)
  • Threading: 4 to 224 (48)
  • Longitudinal feeds: .0015" to .0853" per rev.
  • Cross feeds: .0004" to .0255" per rev.
  • Motor: 1/2 HP
  • Dimensions: 60" x 36" x 54" high
  • Estimated weight: 575 lbs.

Equipped With:

  • 3-Jaw & 4-Jaw chucks
  • Steady rest
  • Live center
  • Tool post ring/rocker
  • Wood bench / stand


Click On Images To View Full Size:


You may also call us at: 1-800-619-GOLD
between the hours of 9am and 5pm EST
OR E-Mail David Gold at DGOLD@GoldMachinery.com

Financing Available - Low Monthly Payments

© Gold International Machinery 2015

[ Mailing Address | Gold International Machinery, Corp | P.O. Box 998 Pawtucket, RI 02862 ]
[ Physical Address: | 136 Newell Avenue | (corner of Thurston & Newell Sts.) | @Exit 26, Route 95 North | Pawtucket, RI USA 02860-0998 ]
[ mail@goldmachinery.com | Toll Free: 1-800-619-GOLD | Phone: 401-724-3200 | Fax: 401-728-5770 ]